Catalogue 2015 v2

CATALOGUE 2014

Ronda Guglielmo Marconi, 4 · Parque Tecnológico · 46980 Paterna (Valencia España ) (+34) 963 311 423 (+34) 963 307 182 [email protected] www.proyecson.com

P-SBOX 14Silencer Box for Boothless Cinemas

El P-SBOX 14 es una envolvente metálica activa para el alojamiento de un proyector de cine digital en el interior de la sala de proyección.

El P-SBOX14 ha sido diseñado para conseguir cuatro objetivos:

-Proteger el proyector digital instalado dentro de la sala.-Minimizar el ruido que el proyector produce. -Mantener ventilado, de forma adecuada y correcta el proyector sin necesidad de instalación externa de sistema de climatización.-Proporcionar alojamiento para otros equipos de cine digital como sistema 3D pasivo, routers, conversores…

The P-BOX 14 is an active metal casing to hold the digital cinema projector to be placed inside the screening room.

The P-SBOX14 has been designed to achieve four objectives:

-To preserve your digital projector installed within the screening room. -To minimize any noise made by the projector. -To mantain the projector properly ventilated thus avoiding the need of any external cooling system. -To provide accommodation for other digital cinema equipment such as passive 3D system, routers, converters...

P-SBOX 14Silencer Box for Boothless Cinemas

CARACTERÍSTICAS TÉCNICAS

4 anclajes superiores y posibilidad de motorizar el movimiento vertical.

Paneles laterales fácilmente desmontables para poder realizar las tareas de mantenimiento del proyector: cambios de �ltros, lámparas, etc.

Sistema de cadena articulada para la conducción del cableado de alimentación y control desde el techo hasta el P-SBOX14.

Reducción de ruido: 25 dB. Revestimiento acústico absorbente y aislante en todos los laterales para aislar acústicamente el proyector del exterior. Silenciadores acústicos, diseñados especí�camente para todas las entradas y salidas de aire. Sistema de silent-blocks para evitar la transmisión física de las vibraciones del proyector a la sala. Ruido Total con el proyector funcionando < 38dB.

Ventiladores de extracción y de impulsión.

Protección eléctrica monofásica de 20A y doble toma de alimentación de 220V para proteger el proyector digital y cualquier otro equipo alojado internamente.

Bandeja metálica con la inclinación ajustable mediante un sistema mecánico, para adaptar la inclinación del proyector digital a las necesidades de la sala hasta en 15º.

Construido en acero,presenta un acabado en pintura electrostática negra mate para evitar brillos en la sala.

- Peso Total: 160 kg sin Proyector.- Dimensiones: 1370 x 1220 x 800 mm.- Fijación superior mediante 4 cáncamos.

Espacio disponible para instalación de sistema pasivo 3D.

CARACTERÍSTICAS OPCIONALES

Desplazamiento vertical manual o motorizado.

Fijación superior mediante amortiguadores de gas.

TECHNICAL SPECIFICATIONS

4 top anchorages with optional motorized vertical movement.

Easily removable side panels for a proper maintenance of the projector: changing �lters, lamps, etc..

Driving articulated chain system to protect and control the wiring system from the roof to the P-SBOX14.

Noise reduction: 25 dB. Acoustic and insulating lining on all sides to isolate the projector from the outside. Sound suppressors, speci�cally designed for all incoming and outgoing air. Silent-blocks system to avoid physical transmission of vibrations from the projector to the room. Total noise with a running projector <38dB.

Exhaust and blower fans.

20A single phase power shielding and double 220V power outlet to protect the digital projector and other equipment housed.

Metal tray with adjustable inclination by mechanical system to adapt digital projector tilt to the needs of the room up to 15 degrees.

Steel furnished and black powder coated to avoid glittering.

- Total Weight: 160 kg without projector.- Dimensions: 1370 x 1220 x 800 mm.- Top �xing with 4 eyebolts.

Space available for installation of a passive 3D system.

OPTIONAL FEATURES

Optional Manual or motorized vertical scroll movement.

Top �xing with 4 eyebolts and optionally by gas bu�ers.



P-SLIFTBOXElevador de tijera para P-SBOX14

Scissor lift for P-SBOX14

El elevador de tijera motorizado P-SLIFTBOX permite descender nuestra solución para cine sin cabina, el P-SBOX14, desde su ubicación de proyección en el techo hasta la posición de mantenimiento.

La combinación de nuestra envolvente activa para alojar el proyector DCI P-SBOX14 y el elevador P-SLIFTBOX le permitirá instalar el proyector DCI donde sea necesario dentro de la sala de proyección eliminando la necesidad de construir una cabina de proyección.

P-SLIFTBOX es un elevador motorizado de tijera que permite descender el proyector alojado en nuestro sistema de cine sin cabina P-SBOX14 hasta una posición cómoda y accesible de mantenimiento. Tras cada descenso, P-SLIFTBOX vuelve a situar el proyector de forma precisa en su posición de proyección, bajo el techo, asegurando que la proyección permanecerá centrada en la pantalla.

Dispone de un sistema de motorización robusto y �able, capaz de hacer descender el proyector entre 2’5 metros y 5 metros como máximo, dependiendo de la versión seleccionada.

The motorized scissor lift P-SLIFTBOX lets you lower our Boothless Cinema Solution P-SBOX14 from its working position, close to the ceiling, to its service position.

The combination of our Boothless Cinema Solution P-SBOX14 and the lift P-SLIFTBOX allows the installation of a DCI digital projector inside the screening room. You don’t need to build any projection booth, thus dramatically reducing the investment and at the same time increasing the number of seats. P-SLIFTBOX lets you easily lower our Boothless Cinema Solution P-SBOX14 from its working position, close to the ceiling, to its service position. After each movement the P-SLIFTBOX makes the projector precisely come back to its projecting position just beneath the ceiling, ensuring that the projection remains centered in the screen. P-SLIFTBOX is professionally engineered, includes a strong and reliable motorisation capable of lowering your projector between 2’5 and 5 meters depending on the selected model .


MEDIDASMEASUREMENTS

CARACTERÍSTICAS TÉCNICAS TECHNICAL CHARACTERISTICS

- Construcción robusta- Final de carrera para posición de mantenimiento.- Acabado en negro- Posición de proyección precisa- Dispositivos de seguridad anti caída- Control de movimiento por relé de contacto- Máxima carga: 320 Kg.- Control de bajada y subida mediante pulsador- Peso: 110 Kg

- Sturdy construction- Extremely low maintenance requirements- Black coated �nishing- Long-standing static positioning and accurate repeatability- Alti-fall device- Limit switch for accurate positioning- Maximum load: 320 Kg.- Contact closure control- Weight: 110 Kg

P-SLIFTBOXElevador de tijera para P-SBOX14

Scissor lift for P-SBOX14

MODELOMODEL

251

302

2500

5000

4

6

Altura Plegado (mm)Height Fully Retracted

Descenso Máximo (mm)Overall Stroke

Número de TijerasNumber of Scissors

P-LIFTBOX1

P-LIFTBOX2


P-WALLIFTElevador de pared para P-SBOX14

Rail guided lift for P-SBOX14

El elevador de pared P-WALLIFTBOX permite descender nuestra solución para cine sin cabina, el P-SBOX14, desde su ubicación de proyección en la parte alta de la pared de fondo de sala hasta la posición de mantenimiento.

La combinación de nuestra envolvente activa para alojar el proyector DCI P-SBOX14 y el elevador P-WALLIFTBOX le permitirá instalar el proyector DCI en la pared del fondo de la sala de proyección eliminando la necesidad de construir una cabina de proyección.

P-WALLIFTBOX es un elevador motorizado sobre raíles que permite descender el proyector alojado en nuestro sistema de cine sin cabina P-SBOX14 hasta una posición cómoda y accesible de mantenimiento. Tras cada descenso, P-WALLIFTBOX vuelve a situar el proyector de forma precisa en su posición de proyección, elevado sobre la última �la de asientos asegurando que la proyección permanecerá centrada en la pantalla.

Dispone de un sistema de motorización robusto y �able, capaz de hacer descender el proyector entre 3 metros y 5 metros como máximo, dependiendo de la versión seleccionada.

The rail guided lift P-WALLIFTBOX lets you install our Boothless Cinema Solution P-SBOX14 on the top of the back wall, in the screening room and lower it to its service position.

The combination of our Boothless Cinema Solution P-SBOX14 and the lift P-WALLIFTBOX allows the installation of a DCI digital projector inside the screening room. You don’t need to build any projection booth, thus dramatically reducing the investment and at the same time increasing the number of seats. P-WALLIFTBOX lets you easily install our Boothless Cinema Solution P-SBOX14 on the top of the back wall of the screening room and lower it to its working position to its service position. After each movement the P-WALLIFTBOX makes the projector precisely come back to its projecting position, ensuring that the projection remains centered in the screen. P-WALLIFTBOX is professionally engineered, includes a strong and reliable motorisation capable of lowering your projector between 3 and 5 meters depending on the selected model .


MEDIDASMEASUREMENTS


- Construcción robusta- Final de carrera para posición de mantenimiento.- Acabado en negro- Posición de proyección precisa- Dispositivos de seguridad anti caída- Control de movimiento por relé de contacto- Máxima carga: 320 Kg.- Control de bajada y subida mediante pulsador

- Sturdy construction- Extremely low maintenance requirements- Black coated �nishing- Long-standing static positioning- Accurate repeatability- Alti-fall device- Limit switch for accurate positioning- Maximum load: 320 Kg.- Contact closure control

P-WALLIFTElevador de pared para P-SBOX14

Rail guided lift for P-SBOX14

MODELOMODEL

3100

4100

5100

Descenso Máximo (mm)Overall Stroke

Otros tamaños disponibles bajo demanda / Other sizes avaliable on demand

P-WALLLIFTBOX1

P-WALLLIFTBOX2

P-WALLLIFTBOX3


D-Cinema/MPedestal Universal Montado/Assembled Universal Pedestal

Base para proyector digital ensamblada.

Diseño atractivo y práctico, alberga dos racks de 19" (lateral y trasero) donde ubicar los componentes necesarios (28 unidades de rack disponibles para servidor, controlador 3D, automatización, escalador, etc...) Ampliable y �exible, incluye varios kits opcionales para satisfacer las necesidades individuales de cada usuario.

Patas de regulación para ajustar en altura, inclinable en altura 5º mediante bases de rótula, sin contar las bases superiores de expansión con las que se puede llegar a 14º.

Base electri�cada con toma de corriente y switch de conexión, 1 Gb incluido. Salida de corriente interna. Espacios habilitados para paso de cables y racords entre base y proyección.

Assembled digital projector base.

Attractive and practical design, featuring two 19” rack spaces (lateral and / or rear) to place useful components and accesories (28 rack units available for server, 3D controller, automation, scaler, etc ...) Upgradeable and �exible, includes several optional kits to meet every user individual needs.

Regulation legs to �t height, 5º tilt range by elevator plate feet extension, and possibility to tilt range up to 14º.

Powered base with power supply and switch connection, 1 GB included. Internal current output. Areas designated for passage of cables and racords between base and projection.

El pedestal universal está preparado para alojar todos los proyectores digitales del mercado, compatible con:The universal pedestal is designed to store all digital projectors available on the market, compatible with:

Barco Christie Kinoton NEC


999-25-10-00-03RUEDASWHEELS

999-25-10-00-04SOPORTE MONITOR TECLADO

MONITOR ARM- KEYBOARD DRAWERS

999-25-10-00-05EXTRACCIÓN FORZADA

EXHAUST FAN

999-25-10-00-06HERRAMIENTAS ENSAMBLAJE

TOOLS REQUIRED

999-25-10-00-07ALZA AUXILIAR

ELEVATOR PLATE FEET EXTENSION

ACCESORIOS OPCIONALES / OPTIONAL ACCESORIES

INCLUYE/ INCLUDES

D-Cinema/MPedestal Universal Montado/Assembled Universal Pedestal


Dimensiones montada:Dimensions mounted:1100x750x750 mm.43.31’’x29.53’’x29.53’’Peso/Weight: 65 Kg.

Dimensiones packing:Dimensions paking:1200x800x1160 mm.47.24’’x31.5’’x45.6’’Peso/Weight: 90 Kg.

999-25-10-00-02KIT ELECTRIFICACIÓNELECTRIFICATION KIT


D-Cinema/KPedestal Universal/Universal Pedestal

Base para proyector digital en kit para ensamblar.

Diseño atractivo y práctico, alberga dos racks de 19" (lateral y trasero) donde ubicar los componentes necesarios (28 unidades de rack disponibles para servidor, controlador 3D, automatización, escalador, etc...)

Ampliable y �exible, incluye varios kits opcionales para satisfacer las necesidades individuales de cada usuario.

Desmontable completamente, permitiendo así su paletización. Transportable a cabinas de difícil acceso. Se traslada desmontado y el montaje se realiza “in situ”, pudiendo pasar por puertas muy estrechas por las que otros pedestales no caben. Patas de regulación para ajustar en altura, inclinable en altura 5º mediante bases de rótula, sin contar las bases superiores de expansión con las que se puede llegar a 14º.

Electri�cación opcional no incluida: base electri�cada con toma de corriente, switch ethernet. Toma de corriente interna. Canaletas para paso de cables y racords entre base y proyector.

Digital projector base kit for mounting.

Attractive and practical design, featuring two 19” rack spaces (lateral and / or rear) to place useful components and accesories (28 rack units available for server, 3D controller, automation, scaler, etc ...)

Upgradeable and �exible, includes several optional kits to meet every user individual needs.

Fully detachable, allowing its palletization. Easy to transport to cinema booths with di�cult access. Easily moved in dismantled parts and assembled on site. This allows going through very narrow doors where other pedestals would not �t. Regulation legs to �t height, 5º tilt range by elevator plate feet extension, and possibility to tilt range up to 14º.

Optional wiring not included. Wiring with socket and ethernet switch. Internal power cords. Cable ducting to drive cable connections between base and projector.

El pedestal universal está preparado para alojar todos los proyectores digitales del mercado, compatible con:The universal pedestal is designed to store all digital projectors available on the market, compatible with:





999-25-10-00-05EXTRACCIÓN FORZADA

EXHAUST FAN


TOOLS REQUIRED



999-25-10-00-02KIT ELECTRIFICACIÓNELECTRIFICATION KIT

OPCIONES / OPTIONS

D-Cinema/KPedestal Universal/Universal Pedestal


Dimensiones montada:Dimensions mounted:1100x750x750 mm.43.31 x29.53 x29.53Peso/Weight: 65 Kg.

Dimensiones packing:Dimensions paking:800x1200x510 mm.31.5"x47.24"x20.8"Peso/Weight: 98 Kg.


D-Cinema/SPedestal Small/Small Pedestal

Base para proyector digital small en kit para ensamblar.

Diseño atractivo y práctico, alberga un rack de 19" donde ubicar los componentes necesarios (14 unidades de rack disponibles para servidor, controlador 3D, automatización, escalador, etc...)

Ampliable y �exible, incluye varios kits opcionales para satisfacer las necesidades individuales de cada usuario.

Desmontable completamente, permitiendo así su paletización. Transportable a cabinas de difícil acceso. Se traslada desmontado y el montaje se realiza “in situ”, pudiendo pasar por puertas muy estrechas por las que otros pedestales no caben. Patas de regulación para ajustar en altura, inclinable en altura 5º mediante bases de rótula, sin contar las bases superiores de expansión con las que se puede llegar a 14º.

Small Digital projector base kit for mounting.

Attractive and practical design, featuring one 19” rack spaces to place useful components and accesories (14 rack units available for server, 3D controller, automation, scaler, etc ...)

Upgradeable and �exible, includes several optional kits to meet every user individual needs.

Fully detachable, allowing its palletization. Easy to transport to cinema booths with di�cult access. Easily moved in dismantled parts and assembled on site. This allows going through very narrow doors where other pedestals would not �t. Regulation legs to �t height, 5º tilt range by elevator plate feet extension, and possibility to tilt range up to 14º.





TOOLS REQUIRED

OPCIONES / OPTIONS



999-25-10-00-13CAJÓN PEDESTAL D-CINEMA 19” 2U

PULL-OUT DRAWER PEDESTAL D-CINEMA 19” 2U


D-Cinema/SPedestal Small/Small Pedestal


Dimensiones montada:Dimensions mounted:983x775x568 mm.38.70 x 30.51 x 22.36Peso/Weight: 55 Kg.

Dimensiones packing:Dimensions paking:800x800x410 mm.31.5" x 31.5" x 16.14"Peso/Weight: 66 Kg.

DESCRIPCIÓN

Con un solo punto de entrada de contenido, puede surtir a todos sus sistemas de proyeccion. Mantenga centralizados todos sus contenidos digitales.

Solucion compacta que además le puede servir como contenedor de nuestro TMS.

Armario Rack de 30 unidades

Switch 56 puertos Gigabit Ethernet CISCO

Sistema Alimentación In-interrumpida 1500VA

CPU: Intel® Xeon® processor

E5-2609 2.4GHz (up to 130W TDP)

RAM: 8GB DDR3 1333MHZ (4x2GB)

HDD: 12x2TB discos SATA @ 7.200rpm RAID6

(20TB Útiles) Hasta 2 discos de prevencion ante fallos.

PSU: 2x920W redundante

LAN: 4x RJ45 Gigabit Ethernet LAN ports

(Contenido), 2x RJ45 (Gestión)

CRU: 1 x CRU Drive

Chasis: 132mm x 437mm x 648mm

Otros: Monitor/Teclado/Ratón


P-LibraryLibreria Contenidos Digitales / LMS

Todo su contenido digital en una unidad centralizada.

CARACTERÍSTICAS

DESCRIPTION

Ingest from a Single point entry of media content then deliver to all media servers. Centraliced managment of all your media assets.

All-In-One solution that also can be used as container for our TMS solution.

30” Rack

Switch 56 Ports Gigabit Ethernet CISCO

UPS 1500 VA or Higher

CPU: Intel® Xeon® processor

E5-2609 2.4GHz (up to 130W TDP)

RAM: 8GB DDR3 1333MHZ (4x2GB)

HDD: 12x2TB HD SATA @ 7.200rpm RAID6

(20TB avalaible) with up to TWO disk failure.

PSU: 2x920W redundant

LAN: 4x RJ45 Gigabit Ethernet LAN ports

(Content), 2x RJ45 (Management)

CRU: 1 x CRU Drive

Chasis: 132mm x 437mm x 648mm

Others: Monitor/Keyboard/Mouse

All your media assets in a single point solution.

DETAILS


P-LibraryLibreria Contenidos Digitales / LMS


P-DSB12Digital Sound Bypass

TECHNICAL FEATURES

Construction: Industrial chassis, 1 unit 19" rack-mounting, connectors on the rear panel.

Power Requirements: 100-240 VAC, 50-60 Hz, 25W.

Dimensions and Weight:481 x 174 x 44 mm. (18.94"x6.85" x1.73"). 1,5Kg.

Environmental Conditions: Operating: 0ºC to 40ºC (32ºF to 104ºF), 20 to 80% relative humidity (non-condensing).

Warranty: 3 years, parts and labor. Speci�cations subject to change without prior notice.

REAR PANEL CONNECTIONS

4 AES/EBU digital audio inputs in a DB25 male connector.

4 AES/EBU digital audio outputs in a DB25 female connector.

Analog audio channels input from the audio processor output. DB25 female.

Analog audio channels output to the power ampli�ers. DB25 male.

ADVANCED FEATURES

Main volume control on the front panel.

Three cuts equalizer (bass, middle and HF) for the three screen channels.

Fully transparent to the audio chain when not in operation.

Seamless installation and operation.

The P-DSB12 is a bypass device for D-Cinema sound systems that enables to “save” cinema sessions, should any device from the audio chain fail.

This device is connected to the digital audio output of cinema server and placed in series to the audio decoder and processor of the room. So even if a failure of an analogue/digital converter or audio processor occurs, the signal will still reach the power ampli�er.

P-DSB12 decodes the digital cinema audio output signal, mixing and weighting all screen channels and sending them to the power ampli�ers. This way if any speaker or centre channel power ampli�er should fail, we would still be able to follow the dialogue through the remaining screen channels. Avoiding thus to suspend the show. Surround channels are decoded and outgo without being modi�ed.

Featuring a internal three cut equalizer for screen channels and a bypass main fader on the front panel.


P-DSB12Digital Sound Bypass

MAIN SUPPLY

CINEMA SOUNDPROCESSOR

DIGITAL CINEMA SERVER

P-DSB-12

4xAESAUDIO

OUTPUT

ANALOGAUDIO

OUTPUT

4xAESAUDIOINPUT

CONNECTION DIAGRAM

POWER AMPLIFIERS

4xAESAUDIO

OUTPUT

ANALOGAUDIO

OUTPUT

ANALOGAUDIOINPUT

POWER SUPPLY

4xAESAUDIOINPUT


PAA 20+Automation Adapter

TECHNICAL FEATURES

Construction: Industrial chassis, 1 unit 19" rack-mounting, connectors in the rear panel.


Dimensions and Weight:483 x 128.5 x 44 mm. (19.02"x5.06" x1.73"). 2,5 Kg.


Warranty: 3 years, parts and labor.Speci�cations subject to change without prior notice.


General Purpose Inputs: 8 optoisolated low-voltage inputs, screw connectors, 24V logics.

General Purpose Outputs:12 con�gurable relay outputs, screw connectors, normally closed and normally open contacts 16A VDC max.

24V / 1A output: Usable for auxiliary input and output circuits.

RS232 Serial Port: D-sub 9 female connector.

Network Connection: RJ-45 10Base-T.

ADVANCED FEATURES

Fully con�gurable using a simple web interface.

It is possible to save / restore con�guration �le.

Inclusion of new features on demand.

Test buttons and manual activation of each input/output.

Input and output LED Indicator to provide visual status indication.

Proyecson automation adapter PAA 20+ makes it easy to interface digital cinema playback equipment with existing cinema control systems, thus enabling fully automated presentations.

The unit converts control commands from the digital cinema playback system into relay closures. Input and output connections enable digital cinema equipment to control existing lighting, automation, and other auxiliary systems. The unit can be connected in parallel with existing 35mm automation systems making it easy to switch between 35mm and digital shows. Furthermore it is also possible to run seamless presentations mixing both 35mm and digital content.

The PAA 20+ can be controlled using Ethernet and RS232 ports, features12 con�gurable momentary/latching outputs and 8 inputs that can be used to trigger individual cues. Output relays operate at a maximum current of 16A 250 Vac / 16A 30Vdc. Front-panel LED indicators are provided for all inputs and outputs, ensuring that system status is clearly visible.

The unit is easy to install in a 19" rack-mounted. Rear panel connectors are provided to allow easy wiring. Fully con�gurable through a simple web interface. The factory con�guration is fully compatible with its predecessor the PAA 29+. Valid for any other application not related to Digital Cinema.


PAA 20+Automation Adapter

MAIN SUPPLY

ETHERNETNETWORK SWITCH


PAA 20+

SERIALINTERFACE

SERIALINTERFACE

NETWORKCONNECTOR

CONNECTION DIAGRAM

INPUTCONNECTOR

OUTPUT 1CONNECTOR

OUTPUT 2CONNECTOR

OUTPUT 3CONNECTOR

TO CINEMAROOM AND BOOTH

DEVICE

THEATRE LIGHTSSCREEN MASKING

CURTAINS3D SYSTEMS

AUDIO PROCESSORSADVERTISING SYSTEMS

ETC.

ETHERNETINTERFACE

CONTROLNETWORK

SERIAL CONNECTION

NETWORK CONECTION

WEBADMIN INTERFACE


P-DAC11Digital to Analog Audio Converter

TECHNICAL FEATURES

Construction: Industrial chassis, 1 unit 19" rack-mounting, connectors on the rear panel.


Dimensions and Weight:483 x 158.5 x 44 mm. (19.02"x6.24"x1.73"). 1 Kg.


Warranty: 3 years, parts and labor. Speci�cations subject to change without prior notice.


4 AES/EBU digital audio inputs via:

- Female DB25 Input connector. - Female RJ45 Input connector compatible with all IMBs.

8 balanced analog outputs channels in a DB25 male connector.

ADVANCED FEATURES

24bit DAC, 114 dynamic range and -100dB THD + N.

Supply voltages indicators.

Reception error and 96khz digital audio input indicators.

Audio outputs status signal indicator.

Proyecson P-DAC11 is an 8 channel digital to analog audio converter, it enables to adapt without quality loss any existing audio equipment to digital cinema.

The unit accepts up to 4 AES / EBU digital balanced audio inputs and has 8 balanced analog audio outputs.

The P-DAC11 accepts digital audio from digital cinema equipment and adapts it to analog audio processors that do not have digital inputs. The DAC used in this device has a maximum input resolution of 24 bit, 114dB dynamic range and THD + N up to -100dB.

LEDs indicators on the front panel show the status of the P-DAC11. With standard dimensions of 1U of 19" rack and a rugged construction facilitating its integration within any cinema equipment.


P-DAC11Digital to Analog Audio Converter

MAIN SUPPLY

ANALOG AUDIOPROCESSORDIGITAL CINEMA SERVER

P-DAC11

4xAESAUDIO

OUTPUT

MULTICHANNELANALOG AUDIO

INPUT

4xAESAUDIOINPUTDB25

4xAESAUDIOINPUTRJ45

8CHANNELANALOG AUDIO

OUTPUTDB25

CONNECTION DIAGRAM


P-DSISDigital Audio Switch

TECHNICAL FEATURES

Construction: PCB directly connected to the rear side of the Dolby CP650.

Power requirements: From the CP 650, 15v DC 60mA max.

Dimensions and Weight:106 x 60 x 34 mm (4.17” x 2.36” x1.34”). 120gr.

Environmental Conditions: Operating: 0 to 40 (32 to 104ºF), 20 to 80% relative humidity (non-condensing).

Warranty: 3 years, parts and labor.Speci�cations subject to change without prior notice.

AUDIO CONNECTIONS

4xAES IN: 4 AES-EBU input channels from the digital cinema server which are later on transformed in 8 discrete audio channels DB25 female connector.

OPTIC S/PDIF: Optic S/PDIF Digital audio input through a female TOSLINK connector.

COAXIAL S/PDIF: Digital audio input through a female RCA connector.

SURROUND AND HF CHANNELS OUTPUT: Surround, EX and HF channels output (bi or tri-ampli�ed systems) from the CP650 OPTION connector.

ADVANCED FEATURES

Easy to install and con�gure.

Seamless operation mode.

Uses Dolby CP 650 power supply and audio decoder.

Splits the CP 650 OPTION connector Input/output, which eases the digital audio devices installation in the cinema booth.

The P-DSIS, Proyecson Digital Sound Interface and Switch, is a device which takes advantage of Dolby Cat. 790 audio decoder card along with the CP650 automation features to switch and route digital audio signals towards the Dolby CP650 decoder.

The P-DSIS will only work with Dolby CP650 audio processor featuring the Cat. 790 card.

The device comes with 3 digital audio inputs, 1 automation and power supply I/O, 1 output for both surround and HF channels and 1 audio I/O connector for the CP650.

No external power source is needed since the CP650 own power supply is used.

By using the CP650 automation interface, only an appropiate con�guration of its buttons is needed.


P-DSISDigital Audio Switch


4xAESAUDIO

OUTPUT

CONNECTION DIAGRAM

OPTICAL S/PDIF OUTPUT DEVICE

MULTIFORMAT S/PDIF AUDIO OUTPUT

COAXIAL S/PDIFOUTPUT DEVICE

MULTIFORMAT S/PDIF AUDIO OUTPUT

TOSLINKINPUT

BNCINPUT

SURROUNDEX AND HF

ANALOG AUDIOOUTPUT

POWER AMPLIFIERCP 650 AUTOMATION I/O

CONNECTOR

POWER SUPPLYAND CONTROL

INPUT

CP-650 REQUIREMENTS

Cat. Nº 790 installed.

Minimun CP-650 �rmware version: V 2.1.0.0

Recommended CP-650 �rmware version: V 2.3.6.3

Compatible formats: Format 80 (Master Digital In) - Format 81 (Fmt 80 w/Surr. EX)


P-TMS 4.0Theatre management Software

P-TMS is the new software tool from Proyecson speci�cally adapted for the control and monitoring of digital movie theaters.

P-TMS features real-time playback monitoring, shows and play lists creation, content management and scheduling. Available from a single user interface. It also allows KDM management to easily monitor their validity and check on expiration dates.

Creation of multiple users accounts with di�erent access and editing levels is possible, allowing monitoring and con�guring accounts through a single login.

Will work with Doremi, Dolby and GDC Digital Cinema servers. Thanks to its development based on Java, the P-TMS will smoothly run on any Windows, Linux or Mac system.

MAJOR BRANDS SERVER SUPPORT MAJOR BRANDS PROJECTOR SUPPORT CROSS-PLATFORM

Windows Linux

Mac Os

Cross-platform (Windows, Linux, Mac OS X)

Support for all major brands of servers: Dolby, Doremi, Qube, Barco, Christie and GDC.

Support for all major brands of projectors: Barco, NEC, Kinoton and Christie.

Supports automation systems via Ethernet.

Supports Dolby processor (CP650, CP750, CP850)

Ingestion of content from servers and libraries.

Create / Edit / Remove shows.

Play / load of shows and movies.

Create / Edit / Delete schedules.

Playback Media in manual and automatic or in schedule mode.


P-TMS 4.0Theatre management Software

AUTOMATIONS

CP650/CP750 CONTROL

PROJECTOR CONTROL

PLAYBACKMANAGEMENT

SUPERVISION

CONTENT MANAGEMENT

CONTENT

KDMs MANAGEMENT

KDM

SCHEDULEMANAGEMENT

SCHEDULE

INGEST MANAGEMENT

INGEST

ROOM MANAGEMENT

DEVICES CONFIGURATION

LIBRARIESCONFIGURATION

USERS CONFIGURATION

ACTIONS

P-TMS 4.0

SOFTWARE FUNCTION DIAGRAM

P-TMS USER INTERFACE

Documents

Catalogue 2015 v2