CCNA 3 Practice Skill

05.02.12 CCNA 3 Practice Skill

1/3www.ciscotr.com/forum/ccna/7327-ccna-3-practice-skill.html

Forum CISCO Genel CCNA CCNA CCNA 3 Practice Skill

Ankarada bireysel katılımcılara kurumsal hizmet. Güçlü eğitmen kadrosu ile kalitelinetwork eğitimleri yakında başlıyor. [email protected]

Forum'u ilk ziyaretinizse, yukarıda bulunan Yardım linkine tıklayıp bu bölümü kontrol ediniz. Mesaj göndermeye başlamak için Kayıt(Register) olmanız gerekebilir. Yukarıdaki " Kayıt Ol " linkinden üye olabilirsiniz.Mesajları görüntülemek için forumlara girebilirsiniz.

CCNA 3 Practice Skillmerhaba arkadaslar sizlerden bir istegim olacak. en kisa zamanda packet trace practice sinav yapmam lazim. Sorulari cozmemeyardimci olursaniz sevinirim. DRSEnt OSPF/ACL PT Practice SBA A few things to keep

Kullanıcı Adı Şifreniz Giriş

Beni Hatırla

Kayıt olHelp

Ana Sayfa Online Lab Yeni Mesajlar Facebook

Bugünkü Mesajlar Yardım Takvim Forum Eylemleri Yararlı Linkler Gelişmiş Arama Yap

� Konuyu Cevapla Toplam 1 sonuçtan 1 ile 1 arasındakiler gösteriliyor.

Like Be the first of your friends to like this.

Seçenekler Görünüm

10.10.2011, 23:32

Üyelik tarihi:Mesajlar:

Nov 200832

CCNA 3 Practice Skill

merhaba arkadaslar sizlerden bir istegim olacak. en kisa zamanda packet trace practice sinav yapmam lazim.Sorulari cozmeme yardimci olursaniz sevinirim.

DRSEnt OSPF/ACL PT Practice SBA

A few things to keep in mind while completing this activity:1. Do not use the browser Back button or close or reload any Exam windows during the exam.2. Do not close Packet Tracer when you are done. It will close automatically.3. Click the Submit Assessment button to submit your work.IntroductionIn this practice Packet Tracer Skills Exam, you will:• finish the configuration of a partially configured network• establish connectivity within the enterprise and to the Internet• implement access control lists based on a set of security policiesAddressing TableDevice Interface Address Subnet Mask Default GatewayHQ Fa0/0 172.16.100.97 255.255.255.240 n/aS0/0/0 172.16.100.121 255.255.255.252 n/aS0/1/0 172.16.100.125 255.255.255.252 n/aS0/0/1 209.165.201.2 255.255.255.252 n/aLo0 10.0.0.3 255.255.255.255 n/aR1 Fa0/0 172.16.100.65 255.255.255.224 n/aFa0/1 172.16.100.113 255.255.255.248 n/aS0/0/0 172.16.100.122 255.255.255.252 n/aLo0 10.0.0.1 255.255.255.255 n/aR2 Fa0/0 172.16.100.1 255.255.255.192 n/aFa0/1 n/aS0/0/0 172.16.100.126 255.255.255.252 n/aLo0 10.0.0.2 255.255.255.255 n/aH1 NIC 172.16.100.4 255.255.255.192 172.16.100.1H2 NIC 172.16.100.5 255.255.255.192 172.16.100.1H3 NIC Web Server NIC 172.16.100.100128.107.0.10 255.255.255.240 172.16.100.97

NOTE: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.

Step 1: Connect the Devices.a. Connect R2 Fa0/0 to S1 Fa0/1.b. Connect R2 Fa0/1 to S4.c. Connect R2 S0/0/0 to HQ S0/1/0. HQ is the DCE side of the link.

Step 2: Configure the Device Basics.

#1

Memberqwertyou

Forum



« Home Lab Kurulumu için Temel Bilgiler | Bursa'da CCNA Discovery Kursu »

Use the IP addresses in the Addressing Table and your subnetting skills to determine the missing IP addressesaccording to the following guidelines:a. Configure addressing on R2.• Configure the necessary interfaces according to the addressing table.• Configure Fa0/1 with the highest host IP address in the subnet.b. Configure H3 with the highest host IP address in the subnetc. Verify connectivity.Step 3: Configure OSPF.a. Use the following requirements to configure OSPF on HQ, R1, and R2.• Use the process ID 1.• Advertise each subnet individually in area 0 with its corresponding wildcard mask. (HQ should not advertisethe link to the Internet.)• Verify OSPF convergence.b. Configure OSPF Authentication.• Encrypt the updates using MD5 authentication. Authentication should be enabled for the entire area 0.• On the appropriate interfaces, use a key ID of 5 and the password itsasecret.• Verify OSPF convergence.c. Modify the OSPF Configuration.• Modify both sides of the link between HQ and R2 to reflect the actual bandwidth of 384 Kb/s.• Change the priority on R1 so that it is the preferred DR for the LAN it shares with R2.d. Propagate a default route in the OSPF updates.• Configure a default route on HQ and point it to the Internet. Use the outbound interface argument.• Configure OSPF to advertise the default route to neighbors.e. Verify connectivity.Step 4: Configure Access Control Lists.a. Filter inbound traffic from the Internet. Configure and apply a single ACL numbered 100 on the correctrouter that will implement the following policy in order:• Allow only regular HTTP access to the Inside Web Server at its public address 128.107.0.10.• Allow all established TCP connections.• Allow all ICMP replies and unreachable messages.b. Verify that the policy is successfully implemented.c. Filter traffic from the R&D LAN that is attached to R1. Configure and apply a single standard named ACL onthe correct router that will implement the following policy:• Use the name NO_INTERNET (case-sensitive).• Prevent hosts from the R&D LAN on R1 from accessing the Internet and the inside web server LAN.• All traffic to all other inside destinations is allowed.d. Verify that the policy is successfully implemented.e. Filter traffic from the R2 LAN. Configure and apply a single ACL numbered 115 on the router that will limitnetwork traffic and will implement the following policy:• Hosts from the LAN connected to the Fa0/0 interface of R2 are blocked from accessing hosts on the R1R&D LAN.• All other traffic is allowed anywhere.f. Verify that the policy is successfully implemented.Step 5: Verify Connectivity.a. Although these are not scored, the following connectivity tests should be successful:• H1 and H2 can ping the Outside Web Server.• The Outside Host can access the HTTP server on the Inside Web Server.• H1 and H2 can ping the Inside Web Server at 172.16.100.100.b. Although these are not scored, the following connectivity tests should fail:• The Outside Host cannot ping the Inside Web Server.• H3 cannot ping the Inside Web Server, the Outside Host, or Outside Web Server.• H1 and H2 cannot ping H3.

Version 1.0Created in Packet Tracer 5.2.1.0006 and Marvel 1.0.1All contents are Copyright © 1992 - 2009 Cisco Systems, Inc. All rights reserved. This document is CiscoPublic Information.

Arakadaslar yardimlarinizi bekliyorum!!!!! Eger okunakli degilse Assagidaki siteden bakabilirsiniz...

DRSEnt OSPF

Konu qwertyou tarafından (10.10.2011 Saat 23:35 ) değiştirilmiştir.

Alıntı ile Cevapla

� Konuyu Cevapla

Bu Konu İçin Etiketler



-- Türkçe İletişim Cisco Forum Arşiv Yukarı Git

Forum Saati: 23:32. Zaman dilimi GMT +2 olarak ayarlanmıştır.

Powered by vBulletin™ Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.

Search Engine Optimization by vBSEO 3.6.0 RC 1

access, access_list, allowed, bandwidth, bgp, ccna, ccnp, cisco, eigrp, firewall, frame_relay, g-shdsl, icmp, metro_ethernet, mpls, network, ospf, packet tracer, packet_tracer, ping, router, routing, switch, virtual private network, vpnEtiket Bulutuna Bak

Digg

del.icio.us

StumbleUpon

Google

Bu Konuyu Paylaşın !

Konu Acma Yetkiniz Yok

Cevap Yazma Yetkiniz Yok

Eklenti Yükleme Yetkiniz Yok

Mesajınızı Değiştirme Yetkiniz Yok

Yetkileriniz

BB code is Açık

Smileler Açık

[IMG] Kodları Açık

HTML-Kodu Kapalı

Trackbacks are Açık

Pingbacks are Açık

Refbacks are Açık

Forum Kuralları

Documents

CCNA 3 Practice Skill