Centralna Kontrola Uputsvo Eng

www.lge.comP/NO : MFL68301305

Model Name: ACP, ACP BACnet, ACP LonWorks, AC Smart Premium

After reading, store this Users Guide in an easily accessible place for all users.

User Manual(GUI)

*MFL68301305*

ENG

LISH

iEN

GLIS

HiEXPLANATORY NOTES

EXPLANATORY NOTES

CopyrightsThe contents of this Central Controller User Guide are protected by international copyright laws, and the Computer Program Protection Act. The contents of the User Guide and the programs mentioned herein may only be used under license from LG Electronics in strict adherence to the user agreement.

You may not reproduce or distribute, by any means, copies of this User Guide, or any part of it, without prior approval from LG Electronics.

Copyright 2014 LG Electronics. All rights reserved.

Registered TrademarksCentral Controller is a registered trademark of LG Electronics. All other products and company names are trademarks of their respective owners and are used for illustrative purposes only.

ii

ENG

LISH

ii EXPLANATORY NOTES

How to Use This GuidePlease read from beginning to end this User Guide before using Central Controller. Store this guide so that is also easily accessible.

Notations Used In This Guide Control buttons displayed within the system are marked by boldface text in square brackets ([ ]).

Example: [OK], [Save]

Option titles displayed in the program are marked by boldface text.Example: Start, Programs

Keyboard strokes used by the system are marked by boldface text in angle brackets (< >). Example:

iiiEN

GLIS

HiiiTABLE OF CONTENTS

1 SAFETY PRECAUTIONS

7 STARTING7 Login and logout8 Login

8 Logout

9 Home screen composition and features

11 USING THE PROGRAM11 Control/Monitor11 Control/Monitoring screen

composition and features

16 Device Control

37 Monitoring a Device

38 Schedule38 Schedule Screen composition and

features

39 Creating Schedules

42 Checking Schedules

43 Editing Schedules

44 Deleting Schedules

45 Auto Logic45 Peak Control

55 Demand Control

58 Time-limit Operation

64 InterLocking

68 Statistics68 Statistics Screen Composition and

Features

69 Querying Statistics

71 Report71 Report screen composition and

features

73 Querying Report

74 Installing74 Registering Device

78 Managing Device

82 Environment83 General Setting

90 Screen Setting (AC Smart Premium Only)

96 Advance Setting

101 Customer Setting

107 Network Setting (AC Smart Premium Only)

111 E-Mail Setting (ACP, ACP Lonworks, AC Smart Premium Only)

116 TMS Setting

122 Channel Settings (ACP, ACP Lonworks, AC Smart Premium Only)

TABLE OF CONTENTS

ver 1.0.0

ENG

LISH

MEMO

1EN

GLIS

HSAFETY PRECAUTIONS

SAFETY PRECAUTIONS This product must be installed by an installation professional from an LG authorized service

center. Any issues stemming from an installation by an unauthorized person is the responsibility of

the user and will not be covered by warranty. The following safety precautions are to prevent any unforeseen dangers or damage. This product has been designed for business use, or for areas outside the home, and has

passed the Electromagnetic Interference Test.

WARNING It can result in serious injury or death when the directions are ignored.

CAUTIONIt can result in minor injury or product damage when the directions are ignored.

WARNING

Installation y To reinstall the product, please contact the dealer from where you purchased the

product, or a service center for reinstallation service. - Installation of the product by an unauthorized person may result in fire, electric shock, explo-sion, injury, or a malfunctioning of the product.

y Do not twist or damage the power cord. - It may cause fire or electric shock.

y For electrical work, please contact the dealer from where you purchased the product, or a service center.

- Disassembly or repair by an unauthorized person may result in fire or electric shock.

y Install the product in an area shielded from rain. - If water gets into the product, it may malfunction.

y Do not install the product in a humid area. - If the product is damp, it may malfunction.

y For installation of the product, please contact the dealer from where you purchased the product, or a service center.

- Installation of the product by an unauthorized person may result in fire, electric shock, explo-sion, injury, or a malfunctioning of the product.

2

ENG

LISH

SAFETY PRECAUTIONS

y For electrical work, please have an electrician do the work based on the installation manual and specified circuit diagram.

- Using an unsuitable cord, or having a non-professional work on the electricals may result in fire or electrical shock.

y Do not place the product near a fire source. - It may result in the product catching fire.

y If the product is installed in a hospital or a communication base station, provide sufficient protective equipment against electrical noise.

- The product may malfunction or other products may work abnormally.

y Securely install the product. - If the product is not secured during installation, it may fall or malfunction.

y Read the manual thoroughly to correctly install the product. - If not, an incorrect installation may cause fire or electric shock.

y When wiring the product, do not use a non-standard cable, nor extend the cable excessively.

- It may cause a fire or electric shock.

y Securely install the power cord and communication cable. - An unsecure installation may result in a fire or electric shock.

y Do not connect the power cord to the communication terminal. - It may cause a fire, electric shock, or a product malfunction.

y Do not install the product in an area near combustible gas. - It may result in fire, electric shock, explosion, injury, or a malfunctioning of the product.

Use y Do not place a heavy object on the power cord.

- It may cause a fire or electric shock.

y Do not change or extend the power cord arbitrarily. - It may cause a fire or electric shock.

y Use the cord specific to the product. - Using an unauthorized non-standard cord may result in a fire or electric shock.

y Do not use a heat device near the power cord. - It may cause a fire or electric shock.

y Ensure that water never gets into the product. - It can result in an electric shock, or the product may malfunction.

y Do not place any container with liquid on the product. - The product may malfunction.

3EN

GLIS

HSAFETY PRECAUTIONS

y Do not click(touch) the product with wet hands. - It may cause a fire or electric shock.

y Use standard components. - Use of an unauthorized product may result in fire, electric shock, explosion, injury, or a malfunc-tioning of the product.

y If the product has been submerged in water, you should contact a service center. - It may cause a fire or electric shock.

y Do not shock the product. - The product may malfunction.

y Do not store or use any combustible gas or flammable substances near the product. - It may cause a fire, or a product malfunction.

y Do not disassemble, repair, or revamp the product arbitrarily. - It may cause a fire or electric shock.

y Children and the elderly should use the product under the supervision of a guardian. - Carelessness may cause an accident, or the product to malfunction.

y The guardian should prevent children from accessing the product. - The product may be damaged or it may fall, causing injury to children.

y Keep in mind the operating temperature range specified in the manual. if there is no operating temperature range in the manual, use the product between 0 and 40 (32 and 104F).

- If the product is used outside this range, the product may be severely damaged.

y Do not press the switch or button with a sharp object. - It can result in an electric shock, or the product may malfunction.

y Do not wire the product while it is turned on. - It may cause a fire or electric shock.

y If the product sounds or smells different, stop using the product. - It may cause a fire or electric shock.

y Do not place a heavy object on the product. - The product may malfunction.

y Do not spray water on the product, or clean it with a water-soaked cloth. - It may cause a fire or electric shock.

y Do not use the product for the preservation of animals and plants, precision instruments, art pieces, or for other special purposes.

- It may cause property damage.

y Dispose the packing material safely.

- The packing material may result in personal injuries.

4

ENG

LISH

SAFETY PRECAUTIONS

CAUTION

Installation y Securely install the product in an area where the weight of the product can be supported.

- The product may fall and be destroyed.

y Do not use the product where there is oil, steam, or sulfuric gas. - It may effect the product's performance, or damage it.

y Check the rated power capacity. - It may cause a fire, or a product malfunction.

y Use the adapter provided with the product or power from a class 2 24 VAC transformer, depending on model.

- If a non-standard adapter is used, the product may malfunction. The adaptor is not provided with the AC Smart package sold in the U.S.

y Be careful not to drop or damage the product when moving it. - The product may malfunction or the person may sustain an injury.

y Ensure that the cord is connected securely to prevent dew, water, or insects from getting into the product.

- If a foreign substance gets inside, it may cause an electric shock or the product may malfunc-tion.

Use y Clean the product with a soft cloth, but not with a solvent-based detergent.

- The use of a solvent-based detergent may cause a fire or deform the product.

y Do not click(touch) the panel using a pointy or sharp object. - It can result in an electric shock, or the product may malfunction.

y Do not let the product come into contact with a metal substance. - The product may malfunction.

y When sterilizing or disinfecting, stop using the product. - The product may work abnormally.

y Do not click(touch) inside the product. - The product may malfunction.

y Check the condition of the product after using the product for an extended period of time.

- If the product is used for an extended period of time, the product's condition may be worsen, causing injury to the user.

y Do not leave the product near a flower base, water bottle, or any other liquids. - It may cause a fire or electric shock.

5EN

GLIS

HSAFETY PRECAUTIONS

y Transformer selection: - Select an insulating product that complies with IEC61558-2-6 and NEC Class 2.

- In addition, consider the combined power consumption of the modules, accessories, and field devices installed for the selection of an appropriate transformer. Main module current: AC24V 850mA

- Use the provided adaptor when using DC12V. The adaptor is not provided with the AC Smart package sold in the U.S.

6

ENG

LISH

SAFETY PRECAUTIONS

Class A device

Notes

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.

Disposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.2. All electrical and electronic products should be disposed of separately

from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact your city o!ce, waste disposal service or the shop where you purchased the product.

7EN

GLIS

HSTARTING

STARTINGThis section explains how to connect to the system and register devices to setup the environment (prior to using Central Controller).

Login and logoutThe following explains how to log in and out of Central Controller.

Central Controller is, can be controlled not only equipment, but also Web. If you enter the IP address of the Central Controller in the address bar of the Internet without the installation of another program, the central control program Central Controller, Web server has is executed automatically, to use the functionality of the various content I can.

The Manual, I will explain to Central Controller standard equipment.

Notes

y You will need the Adobe Flash Player be installed for the Web control.

y The special character (^), () and (,) are not available.

8

ENG

LISH

STARTING

LoginYou can login as follows.

1. Run Central Controller.2. After entering your ID and password in the login window, click(touch) [Confirm].

You are now logged in.

LogoutYou can logout as follows.

1. On the top right of the Central Controller home screen, click(touch) the [Logout] button. You are now logged out.

9EN

GLIS

HSTARTING

Home screen composition and featuresThe following explains the home screen composition and features.

Number Item Description

Running Status

(Unit) Checks if the devices are operating, stopped, or in error.

Time Check the current date and time. (You need Internet connection to check the weather.)

Today's Schedule y Check the registered schedules in chronological order. y Click(Touch) the [+] button to move to the schedule

menu.

Main Menu Use Central Controller main menu.

Home Return to the home screen.

View Menu Display the active menu.

Current Menu Display the name of the active menu.

ENG

LISH

MEMO

11EN

GLIS

HUSING THE PROGRAM

USING THE PROGRAMThe following explains how to use the Central Controller functions.

Control/MonitorThe following explains the Control/Monitor menu options.

Control/Monitoring screen composition and featuresThe following explains Control/Monitoring screen composition and features.


Select/Deselect All Select/deselect all devices in a group.

[Drawing] Button View floor plans of a group.

[Filter] Button Select which device types are displayed for monitoring and control.

View Type

Select

Select a view type for the monitoring screen (Icon/Simple/Detail)(For more on View Type, refer to page 12)

Group List Check device group listings.

Monitoring Screen Check the control status of a device.

12

ENG

LISH

USING THE PROGRAM


Device Control Box

y Display the device control menu. y The device control box shows different menus

depending on the device. (For more on Control Menu per Device, refer to page 17)

View Type

Control/Monitor menu has three types of views (icon, simple, and detailed). The following shows the screen composition and features per view type.

Icon

The control status is shown in icons. The device icon has a composition and feature as follows.


Operation Mode and Device Status Icon

The color at the top of the icon box shows the current operation mode, and the status of the device is indicated as an icon.

Device IconThe device to be controlled is indicated as an icon.The device shown may not represent the appearance of the actual unit.

Current Temperature Display the current temperature.

Operation Mode Display the operation mode of the device.

Desired Temperature Display the desired temperature.

Device Name Display the name of the device.

13EN

GLIS

HUSING THE PROGRAM

Simple

The control device and operation mode are displayed only.


Operation Mode The color of the box indicates the current operation mode.

Device Icon The device to be controlled is indicated as an icon.

Detail

All properties of the control device are tabulated in detail.

14

ENG

LISH

USING THE PROGRAM

Monitoring screen colors and icons

Box colors and operation mode per icon

Color Icon Operation Mode

(Blue)

Cooling

Ventilation, General

(Orange)

Heating

Ventilation, Electric Heat

(Navy)

Dehumidification

(Sky Blue)

Fan

(Green)

Power Saving

(Purple)

Auto

Ventilation, Auto

(Yellow)

- ON & Short

(Gray)

- OFF & Open

- Error

15EN

GLIS

HUSING THE PROGRAM

Device status icon

Icon Device Status

Filter Exchange

Full Lock On

Peak/Demand Control

Schedule

Control device icon

Icon Device Type

Indoor Device

ERV

AHU

AWHP

Chiller

DI

DO

DOKIT

16

ENG

LISH

USING THE PROGRAM

Device ControlYou can control the devices as follows.

1. From the main menu, click(touch) the [Control/Monitor] menu icon.2. Click(Touch) the device group you want to control from the group list.

The monitoring screen for the device is displayed.3. Click(Touch) the device you want to control.

To select all devices, click(touch) the button at the top. The device control area appears at the bottom of the screen.

4. In the device control box, set the control status of the device. The device control box shows a different menu depending on the device. For information

about the control area for each device, refer to Control Menu per Device on page 17.5. Once you have finalized the settings, click(touch) the [Apply] button.

17EN

GLIS

HUSING THE PROGRAM

Control Menu per Device

The control box menu differs depending on the device. The following shows the control box menu per device.

Indoor Device

The following is the indoor unit control menu and features.

Item Description

Operation y [ON] Button: Starts the operation of the device. y [OFF] Button: Stops the operation of the device.

GoTo [Schedule] Button: Move to Schedule menu.

Room Display the current temperature.

Set TemperatureClick(Touch) []/[] to set the temperature.(The maximum/minimum temperatures that can be set may differ depending on the model.)

Mode

y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode. y [AUTO] Button: Evaluates the operating environment conditions and

automatically sets the optimum mode. y [DRY] Button: Dehumidifies during rainy seasons or whenever humidity

is high. You cannot set the temperature in this mode. y [FAN] Button: Fan runs without temperature control to clean the air. You

cannot set the temperature in this mode.

Fan Speed

y [LOW] Button: Slow fan speed. y [MED] Button: Medium fan speed. y [HIGH] Button: Fast fan speed. y [AUTO] Button: Fan speed automatically adjusts between low, medium

and high fan speeds.

Swing y [Set] Button: Turns on automatic oscillation of the louvers. y [Clear] Button: Turns off automatic oscillation of the louvers.

[Detail. ] Button Controls details.

18

ENG

LISH

USING THE PROGRAM

Indoor unit fine control

Item Description


Set Click(Touch) []/[] to set the temperature.

Mode

y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode. y [AUTO] Button: Evaluates the operating environment conditions and

automatically sets the optimum mode. y [DRY] Button: Dehumidifies during rainy seasons or whenever humidity is

high. You cannot set the temperature in this mode. y [FAN] Button: Fan runs without temperature control to clean the air. You

cannot set the temperature in this mode.

Fan Speed

y [LOW] Button: Slow fan speed. y [MED] Button: Medium fan speed. y [HIGH] Button: Fast fan speed. y [AUTO] Button: Loops from low to medium to high fan speeds.

Swing y [Set] Button: Turns on automatic oscillation of the louvers. y [Clear] Button: Turns off automatic oscillation of the louvers.

Filter Alarm Click(Touch) the Disable button to deactivate the filter exchange alarm. (For other models, it may not work properly.)

19EN

GLIS

HUSING THE PROGRAM

Item Description

Partial Lock

y [HardLock] Button: Disables remote control for all features. y [Clear] Button: All functions are unlocked. y [ModeLock] Button: Disables remote control for local mode setting. y [Clear] Button: Mode is unlocked. y [FanLock] Button: Disables remote control for local fan speed setting. y [Clear] Button: Fan speed is unlocked. y [TempLock] Button: Disables remote control for local temperature setting. y [Clear] Button: Temperature setting is unlocked.

Set Temp Range Click(Touch) []/[] to set the temperature limit.

[2Setpoint] Button Switches between cooling and heating within the selected temperature range.

Indoor 2Setpoint (Auto Operation Mode)

Item Description

Auto Change Over

Set the auto change over function to switch the operation mode automatically to keep the proper room temperature.

y [ON] Button: Enable Auto Change Over y [OFF] Button: Disable Auto Change Over

Lower Click(Touch) []/[] to set the lower limit temperature range (18C~30C / 64F~86F).

Upper Click(Touch) []/[] to set the upper limit temperature range(18C~30C / 64F~86F).

20

ENG

LISH

USING THE PROGRAM

Item Description

Setback

Set the setback function to control the proper room temperature when the indoor unit is turned off. (The setback function works well with "Heat Recovery" model. For other models, it may not work properly.)

y [ON] Button: Enable temperature limits y [OFF] Button: Disable temperature limits

Cooling Start Temp.

Click(Touch) []/[] to set the cooling start temperature(21C~40C / 70F~104F).

Heating Start Temp.

Click(Touch) []/[] to set the heating start temperature (1C~20C / 34F~68F).

ERV

The following is the ERV control menu and features.

Item Description




Set Temperature Click(Touch) []/[] to set a desired temperature (the ERV is not activated).

Mode

y [AUTO] Button: Evaluates the operating environment conditions and automatically sets the optimum temperature.

y [HEX] Button: Air supply and emissions are all ventilated through the heat exchanger.

y [NORM] Button: Ventilate emissions without passing through the heat exchanger.

Fan Speed

y [LOW] Button: Slow fan speed. y [HIGH] Button: Fast fan speed. y [SUPER] Button: Maximum fan speed. y [AUTO] Button: Loops from low to high to super fan speeds.

[Detail. ] Button Control details.

21EN

GLIS

HUSING THE PROGRAM

ERV Fine Control

Item Description


Set Click(Touch) []/[] to set a desired temperature (the ERV is not activated).

Mode



y [NORMAL] Button: Ventilate emissions without passing through the heat exchanger.

Fan Speed


Partial Lock y [Set] Button: Disables remote control for all features. y [Clear] Button: Disable the lock.

22

ENG

LISH

USING THE PROGRAM

Item Description

Additional Function

y [Drift] Button: Reduces energy consumption by operating in the most efficient method possible.

y [Quick] Button: Operates at maximum performance to prevent the room's contaminated or humid air from entering other spaces.

y [Clear] Button: Disables power saving / rapid operation. y [Heater On] Button: Enables the heater function to heat the room. y [Heater Off] Button: Disables the heater function.

Some additional function might not be provided according to your country such as U.S.

ERV DX

The following is the ERV DX control menu and features.

Item Description




Set Temperature Click(Touch) []/[] to set the temperature.

Mode



y [NORM] Button: Ventilate emissions without passing through the heat exchanger.

Fan Speed



23EN

GLIS

HUSING THE PROGRAM

ERV DX Fine Control

Item Description



Mode



y [NORMAL] Button: Ventilate emissions without passing through the heat exchanger.

Fan Speed


Partial Lock y [Set] Button: Disables remote control for all features. y [Clear] Button: Disables the lock.

24

ENG

LISH

USING THE PROGRAM

Item Description

Additional Function

y [Drift] Button: Reduces energy consumption by operating in the most efficient method possible.

y [Quick] Button: Operates at maximum performance to prevent the room's contaminated or humid air from entering other spaces.

y [Clear] Button: Disables power saving / rapid operation. y [Heater On] Button: Enables the heater function to heat the room. y [Heater Off] Button: Disables the heater function. y [Humid On] Button: Enables the humidifier function for room humidity control. y [Humid Off] Button: Disable the humidifier function (not activated).

Some additional function might not be provided according to your country such as U.S.

Co- Airconditioner

y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode. y [AUTO] Button: Operates in Auto Mode. y [STOP] Button: Stops the air conditioning function.

25EN

GLIS

HUSING THE PROGRAM

AHU

The following is the AHU control menu and features.

Item Description




Set Temperature Click(Touch) []/[] to set the temperature.

Mode

y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode. y [FAN] Button: Purifies the air. y [DRY] Button: Dehumidifies the air during the rainy season or when

humidity is high. y [Drift] Button: Reduces energy consumption by operating in the most

efficient method possible.

AutoVent

y [Set] Button: If the CO2 concentration level increases during cooling or heating, increase the outdoor air volume to reduce the CO2 concentration level.

y [Clear] Button: Disables AutoVent.

Humidify y [Set] Button: Enables the humidifier function. y [Clear] Button: Disables the humidifier function.


26

ENG

LISH

USING THE PROGRAM

AHU Fine Control

Item Description



Mode

y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode. y [FAN] Button: Purifies the air. y [DRY] Button: Dehumidifies the air during the rainy season or when

humidity is high. y [Drift] Button: Reduces energy consumption by operating in the most

efficient method possible.

AutoVent

y [Set] Button: If the CO concentration level increases during cooling or heating, increase the outdoor air volume to reduce the CO concentration level.

y [Clear] Button: Disables AutoVent.

CO2(ppm) Use[]/[]tosetthedesiredcarbondioxideemissionlevelfrom500ppmto 1,500 ppm in intervals of 100 ppm (CO is not settable in some models.).

Humidify y [Set] Button: Enables the humidifier function. y [Clear] Button: Disables the humidifier function.

Humidity(%) Use[]/[]tosetthedesiredhumidityfrom40%to60%inintervalsof1%.

Partial Lock y [Set] Button: Disables remote control for all features. y [Clear] Button: Disables the lock.

OA Damper Use[]/[]tosettheOAdamperfrom0to90inintervalsof1.

EA Damper Use[]/[]tosettheEAdamperopennessfrom0to90inintervalsof1.

27EN

GLIS

HUSING THE PROGRAM

Item Description

MIX Damper Use[]/[]tosetthemixdamperopennessfrom0to90inintervalsof1.

DOKIT

The following is the DOKIT control menu and features.

Item Description



AWHP

The following is the AWHP control menu and features.

Item Description



Mode


y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode.

Air/Water Temp. (Indicated as air or water temperature depending on the product.)Click(Touch) []/[] to set the air/water temperature.

HotWater Temp. Click(Touch) []/[] to set the water heater temperature.


28

ENG

LISH

USING THE PROGRAM

AWHP Fine Control

Item Description


Hotwater y [ON] Button: Enables the hot water function. y [OFF] Button: Disables the hot water function.

Partial Lock y [Set] Button: Disables remote control for all features. y [Clear] Button: Disable the lock.

Mode


y [COOL] Button: Operates with Cooling Mode. y [HEAT] Button: Operates with Heating Mode.

Air/Water Temp. (Indicated as air or water temperature depending on the product.)Click(Touch) []/[] to set the air/water temperature.

Hot Water Temp. Click(Touch) []/[] to set the water heater temperature.

29EN

GLIS

HUSING THE PROGRAM

DO

The following is the DO control menu and features.

Item Description

Operation y [SHORT] Button: Short signal output. y [OPEN] Button: Open signal output.


30

ENG

LISH

USING THE PROGRAM

Registering Floor Plan

In the Control/Monitor menu, you can register floor plans to identify and locate each device and device group. On the floor plan, you can register space information as well as the location where a device is installed.

1. In the main menu, click(touch) the [Control/Monitor] menu icon.2. Select the device group you want to monitor from the group list.

The monitoring screen for the device is displayed.3. Click(Touch) [Drawing] button.

4. Click(Touch) [Edit] button.

31EN

GLIS

HUSING THE PROGRAM

5. [Add Drawing] button. The Open Floor Plan window is displayed.

6. Select a desired floor plan from the Open Floor Plan window, then click(touch) [Confirm]. The floor plan image is displayed.

Notes

You cannot open a floor plan if the file name is in other languages. Use English file names.

32

ENG

LISH

USING THE PROGRAM

7. In the device list, select a device you want to display on the floor plan and click(touch) the device location on the plan. To delete a device from the plan, double-click(touch) its icon.

8. To complete the registration of the floor plan, click(touch) the [Apply] button.

Notes

y To add a floor plan, put image file to USB root directory or /mnt/flash/map directory.

y To add a floor plan, you can only use jpg, gif, or png file formats.

y To add a floor plan, a 2MB or less image size is recommended.

33EN

GLIS

HUSING THE PROGRAM

Checking Floor Plan

In Control/Monitoring, you can check floor plans. On the floor plan, you can register space information as well as the location where a device is installed.



The registered floor plan is displayed.

34

ENG

LISH

USING THE PROGRAM

Editing the Floor Plan

You can edit a registered floor plan.



4. Click(Touch) [Edit] button.

5. To change floor plan, click(touch) [Change] button. The Open Floor Plan window is displayed.

6. Select a desired floor plan from the Open Floor Plan window, then click(touch) [Confirm]. The floor plan image is displayed.

35EN

GLIS

HUSING THE PROGRAM

7. To change the location of a device, click(touch) the icon of the device and then click(touch) the location to which you want to move that device.

8. To complete floor plan editing, click(touch) the [Apply] button.

Notes

y To add a floor plan, put image file to USB root directory or /mnt/flash/map directory.

y To add a floor plan, you can only use jpg, gif, or png file formats.

y To add a floor plan, a 2MB or less image size is recommended.

36

ENG

LISH

USING THE PROGRAM

Deleting the Floor Plan

You can delete a registered floor plan.



The registered floor plan is displayed.4. Click(Touch) [Edit] button.5. To delete a floor plan, click(touch) the [Delete] button.

6. When you are prompted to confirm the deletion, click(touch) [Confirm].

37EN

GLIS

HUSING THE PROGRAM

Monitoring a DeviceYou can check the control state of registered devices.


The monitoring screen for the device is displayed.3. Click(Touch) a device you want to monitor.4. Please check the device information in the monitoring screen.

The information on the monitoring screen differs depending on the view type. For details about the view types, refer to View Type on page 12.

5. To check the control status of the device, click(touch) the [Detail. ] button.

38

ENG

LISH

USING THE PROGRAM

ScheduleThe Schedule feature allows you to program the behavior of the devices. If a device must adhere to a certain schedule, you can program the device to operate only at scheduled times. Scheduled devices do not activate unless programmed to do so and are managed centrally. This can significantly reduce energy consumption.

Schedule Screen composition and featuresThe following explains Schedule Screen composition and features.


[Today] Button Display today's date, the current week, or the current month.

Dates y Displays the selected date. y Use []/[] to move to the previous/next date.

View Type y [W] Button: Converts to Week View. y [M] Button: Converts to Month View.

[Total] Button View full schedule list.

Calendar y Displays the schedules for the selected dates. y Today's date is marked in light blue.

39EN

GLIS

HUSING THE PROGRAM


Schedule List Displays registered schedules by name.

[Add a Schedule]

ButtonRegisters new schedules.

Creating SchedulesYou can configure and add a schedule for a device.

1. In the main menu, click(touch) [Schedule] menu icon.2. Click(Touch) [Add a Schedule] Button.

The Add Schedule window opens.3. In the group list, click(touch) a device for which a schedule is applied.

The selected device is displayed in the applied device area of the control command configuration.

40

ENG

LISH

USING THE PROGRAM

4. Configure the schedule information that controls the device.

Item Description

Schedule Name Click(Touch) the input box. Enter the name for the schedule.

Time y Click(Touch) the time area and then the [+]/[-] button to select the

desired time. y Click(Touch) the [AM]/[PM] button to select before or after midday.

Period Click(Touch) the period area and then the [+]/[-] button to select the desired period.

Repeat Pattern

Click(Touch) the Repetition Pattern area and select a desired pattern. y Select Day: Selected days the schedule will be performed. y Once: Applies a schedule once on a selected date. y Everyday: Applies the same schedule Everyday. y Mon - Fri: Applies a schedule repeatedly from Monday to Friday. y Mon - Sat: Applies a schedule repeatedly from Monday to

Saturday.

Select day Click(Touch) a desired day to apply a schedule.

41EN

GLIS

HUSING THE PROGRAM

5. Click(Touch) the device icon of the applied device. The control configuration window for the device is displayed. The control configuration

window differs depending on the device.

6. Configure the device control status, then click(touch) the [Confirm] button. The control list configured in the Command Summary area is displayed.

7. To complete the schedule configuration, click(touch) the [Confirm] button.

42

ENG

LISH

USING THE PROGRAM

Checking SchedulesYou can check registered schedules.

1. In the main menu, click(touch) the [Schedule] menu icon.2. In the Date area, click(touch) the []/[] button to select a schedule search period.

The number of schedules are displayed for the selected date.

3. To check schedule details, click(touch) a schedule you want to check in the schedule list. Schedule details are displayed.

43EN

GLIS

HUSING THE PROGRAM

Editing SchedulesYou can modify the content of a registered schedule as follows.

1. In the main menu, click(touch) the [Schedule] menu icon.2. Click(Touch) a schedule you wish to modify from the schedule list.

Schedule details are displayed.3. Click(Touch) the [Edit] button.

The schedule configuration screen is displayed.

4. Modify the schedule information and device control configuration, then click(touch) the [Confirm] button. The changed data will be saved.

44

ENG

LISH

USING THE PROGRAM

Deleting SchedulesYou can delete a registered schedule as follows.

1. In the main menu, click(touch) the [Schedule] menu icon.2. Click(Touch) a schedule you wish to delete from the schedule list.

Schedule details are displayed.3. Click(Touch) the [Delete] button.

4. When you are prompted to confirm the deletion, click(touch) [Confirm]. The selected schedule is deleted.

45EN

GLIS

HUSING THE PROGRAM

Auto LogicAuto Logic allows the system to automatically control the power consumption of external devices. You can also set the indoor temperature to automatically adjust to outdoor conditions or activate devices for certain periods of time.

Notes

If you set a device control value in the auto logic status view, the device can operate based on that value.

Peak ControlPeak control limits peak power consumption. You can set the target operating rate so that total power consumption does not exceed the set limit. To prevent power consumption from exceeding the limit, the system will automatically change cooling mode to fan mode and cancel heating mode.

Notes

Depending on the installation site specifications, either the peak control or demand control functions can be selected. Go to Environment > Advance Setting > Peak/Demand Set and select a desired control type.

46

ENG

LISH

USING THE PROGRAM

Editing Groups

The auto logic designates the registered devices as a group and controls them by group. The following explains how to create groups and how to edit the created groups.

Adding Groups

You can create a group as follows.

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icons.2. Click(Touch) the [Edit Group] button.

The screen converts to Edit Group.3. Click(Touch) the [Add Group] button.

Notes

By click(touch)ing [Apply default group], you can create a group automatically based on the group and indoor unit configuration set in the Device Management menu.

4. When the window to input a group name is displayed, enter a group name and click(touch) the [Confirm] button. The group is added to the group list.

5. In the group list, click(touch) the group added in Step 4.

47EN

GLIS

HUSING THE PROGRAM

6. In the non-registered device area, click(touch) a device to add to the new group and click(touch) the [Add] button. The selected device is moved to the registered device area.

Notes

Peak control is only limited to indoor devices, therefore you cannot register other devices such as the ERV, AHU or AWHP.

7. To complete group creation, click(touch) the [Apply] button.

48

ENG

LISH

USING THE PROGRAM

Changing Group Name

You can change the name of a registered group as follows.

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.2. Click(Touch) the [Edit Group] button.

The screen converts to Edit Group.3. In the group list, click(touch) a group whose name you want to change and click(touch) the

[Rename] button.

4. Enter a new group name and click(touch) the [Confirm] button. The group name is now changed.

5. To complete group rename, click(touch) the [Apply] button.

49EN

GLIS

HUSING THE PROGRAM

Deleting Groups

You can delete a registered group.

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.2. Click(Touch) the [Edit Group] button.

The screen converts to Edit Group.3. In the group list, click(touch) a group to be deleted and click(touch) the [Del Group] button.

4. When you are prompted to confirm the deletion, click(touch) [Confirm]. The selected group is deleted and the tab removed.

Notes

y The group configured in Peak Control is also applied to Demand Control.

y If you change the group configuration in the device management menu, the group configured in Peak Control is initialized.

50

ENG

LISH

USING THE PROGRAM

Configuring Peak Control

You can configure Peak Control as follows.

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.2. Select the control status in the control configuration area.


Group List Displays the device group list and group priority.

Control

Configuration Area

Configures Peak Control configuration and details. y Operation Status

- Can be configured in [Environment > Advance Setting].

- Priority Control: Control based on group priority - Outdoor Unit Control: Controls based on outdoor unit capacity limit.

51EN

GLIS

HUSING THE PROGRAM


Control

Configuration Area

(Operation Status - Priority Control selected) y Operation

- [Run] Button: Operates the device. - [Stop] Button: Stops the operation of the device.

y Shift Time(Min.): Click(Touch) []/[] to set the time in minutes to force the operation to switch over.

y Target ratio(%): Click(Touch) []/[] or drag to set the target rate.

y Current Running(%): Displays the current rate.

(Operation Status - Outdoor unit capacity control selected) y Operation


y Target ratio(%): Click(Touch) []/[] or drag to set the target rate.

[Edit Group]

Button Edit a control group.

[Cancel] Button Cancels control configuration.

[Apply] Button Applies control configuration.

3. To complete configuration, click(touch) the [Apply] button.

52

ENG

LISH

USING THE PROGRAM

Configuring Priority

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.2. In the group list, click(touch) the priority icon ( ) of the group in question and then select a

desired priority.

Notes

Basically, a newly added group has the highest priority. If a group is added, re-configure the priority for all groups.

53EN

GLIS

HUSING THE PROGRAM

Checking Peak Control Status

You can check the Peak Control configuration status as follows.

1. In the main menu, click(touch) the [AutoLogic > Peak Control] menu icon.2. Check how Peak Control is configured.

54

ENG

LISH

USING THE PROGRAM

Item Description

Control Configuration

Area

Configure Peak Controls. y Operation Status

- Can be configured in [Environment > Advance Setting]. - Priority: Controls based on group priority - Outdoor unit capacity control: Controls based on outdoor unit capacity limit.



y ShiftTime(Min.): The cycle by which the operation switches over. y Target ratio(%): Displays the target operation rate. y Current Running(%): Displays the current rate.



y Target ratio(%): Displays the target operation rate.

55EN

GLIS

HUSING THE PROGRAM

Demand ControlAfter observing changes in power consumption, this feature can prevent power consumption from exceeding a set limit. If you set the demand control and the program predicts that power consumption will exceed that limit, it will begin deactivating less important devices to save energy.

Notes

y For demand, depending on the installation site specifications, either the peak control or demand control functions can be selected. Go To Environment > Advance Setting > Peak/ Demand Settings and select a desired control type.

y For outdoor capacity control, depending on the installation site specifications, either the peak control or demand control functions can be selected.

y In the Demand Control menu, you can only check the Demand Control status. You cannot configure the operation, operation switchover cycle, desired rate, current rate, etc.

Notes

Central Controller can be used with the LG demand controllers (PCP-D11A2J), but not with the demand controllers from other manufacturers.

56

ENG

LISH

USING THE PROGRAM

Checking Demand Control Status

You can check the Peak Control configuration status as follows.

1. In the main menu, click(touch) the [AutoLogic > Demand Control] menu icon.2. Check how Demand Control is configured.


Comm. Status with Demand

Controller

Displays the communication status between demand controller and Central Controller.

Control

Configuration Area

Checks the demand configuration details. y Operation Status

- Can be configured in [Environment > Advance Setting].

- Priority Control: Control based on group priority - Outdoor Unit Control: Controls based on outdoor unit capacity limit.

57EN

GLIS

HUSING THE PROGRAM


Control

Configuration Area


- [Operate] Button: Operates the device. - [Stop] Button: Stops the operation of the device.

y Shift Time(Min.): The cycle by which the operation switches over.

y Target ratio(%): Displays the target operation rate. y Current Running(%): Displays the current rate.



y Target ratio(%): Displays the target operation rate.

58

ENG

LISH

USING THE PROGRAM

Time-limit OperationThe time-limit operation is to limit the amount of time the devices (indoor unit, ERV, DOKITs, AWHP, and AHU) are running individually. By setting the device operation time in advance, you can control for how long a device works and have it stop automatically.

Editing Groups

The auto logic designates the registered devices as a group and controls them by group. The following explains how to create groups and how to edit the created groups.

Adding Groups

You can create a group as follows.

1. In the main menu, click(touch) the [AutoLogic > TimeLimitControl] menu icon.2. Click(Touch) the [Edit Group] button.

The screen converts to Edit Group.3. Click(Touch) the [Add Group] button.

Notes

By click(touch)ing [Apply default group], you can create a group automatically based on the group and indoor unit configuration set in the Device Management menu.

4. When the window to input a group name is displayed, enter a group name and click(touch) the [Confirm] button. The group is added to the group list.

59EN

GLIS

HUSING THE PROGRAM

5. In the group list, click(touch) the group added in Step 4.6. In the non-registered device area, click(touch) a device to add to the new group and click(touch)

[Add] button. The selected device is moved to the registered device area.

Notes

For the time-limit operation, you cannot register DI/DO.

7. To complete group creation, click(touch) the [Apply] button.

60

ENG

LISH

USING THE PROGRAM

Changing Group Name



The screen converts to Edit Group.3. In the group list, click(touch) a group whose name you want to change and click(touch) the

[Rename] button.

4. Enter a new group name and click(touch) the [Confirm] button. The group name is now changed.

5. To complete group rename, click(touch) the [Apply] button.

61EN

GLIS

HUSING THE PROGRAM

Deleting Groups



The screen converts to Edit Group.3. In the group list, click(touch) a group to be deleted and click(touch) the [Del Group] button.


5. To complete group delete, click(touch) the [Apply] button.

62

ENG

LISH

USING THE PROGRAM

Configuring Time-Limit Operation

1. In the main menu, click(touch) the [AutoLogic > TimeLimitControl] menu icon.2. In the group configuration status area, click(touch) a group to be controlled.

The device list, status information, and condition details of the group are displayed.

3. Select the control status in the conditions configuration area.

Item Description

OperChoosing whether to run Time-Limit Operation

y [Run] Button: Run the time-limit operation. y [Stop] Button: Stops the time-limit operation.

Hours to Off(Hour) y Select the operation time limit of an operation group. y The devices included in the group operates for the

selected time then stops automatically.

Days Select a day on which to run the time-limit operation.

63EN

GLIS

HUSING THE PROGRAM

4. To run the time-limit operation on the group, in the group configuration operation status area, click(touch) the [disable] button. The button changes to [enable].

5. To complete the configuration, click(touch) the [Apply] button.

Notes

If you change the operation stop standby time, it takes about 15 seconds to apply it.

64

ENG

LISH

USING THE PROGRAM

InterLockingYou can integrate the system with external devices, like remote shutdown, to halt the operation of all indoor units and ERV. For InterLocking, you should create a pattern for devices and apply the control configuration. The following explains how to create and manage a pattern and control device integration.

Managing Pattern

The following explains how to register integrated devices as a pattern and how to modify or delete a registered pattern.

Adding Pattern

You can add a pattern as follows.

1. In the main menu, click(touch) the [AutoLogic > InterLocking] menu icon.2. Click(Touch) the [Add] button.

A window to create a pattern is displayed.3. Type a new pattern name in the pattern name input window.

4. Click(Touch) the [Input Device] tab.

65EN

GLIS

HUSING THE PROGRAM

5. In the non-registered device area, click(touch) a device to be registered and click(touch) the [Add] button.

6. In the input device list, click(touch) the device you want to trigger control.7. Select a control status in the control configuration area.8. Click(Touch) the [Output Device] tab.9. In the non-registered device area, click(touch) a device to be registered and click(touch) the

[Add] button.

10. In the output device list, click(touch) the device you want to control.

66

ENG

LISH

USING THE PROGRAM

11. Select a control status in the control configuration area.12. To complete the adding of a pattern, click(touch) the [Apply] button.

Editing Pattern

You can edit a pattern as follows.

1. In the main menu, click(touch) the [AutoLogic > InterLocking] menu icon.2. Select a pattern and click(touch) the [Edit] button.

The pattern editing screen opens.3. Modify the pattern configuration information and click(touch) the [Apply] button.

Deleting Pattern

You can delete a pattern as follows.

1. In the main menu, click(touch) the [AutoLogic > InterLocking] menu icon.2. Select a pattern to be deleted and click(touch) the [Delete] button.3. When you are prompted to confirm the deletion, click(touch) [Confirm].

The selected pattern is deleted.

67EN

GLIS

HUSING THE PROGRAM

Checking InterLocking

1. In the main menu, click(touch) the [AutoLogic > InterLocking] menu icon.2. Click(Touch) a pattern for which you want check the device integration.

The device integration status for the pattern is displayed.

68

ENG

LISH

USING THE PROGRAM

StatisticsThe following explains how to use statistics and graphs to check the power consumption and operation time of a device.

Statistics Screen Composition and FeaturesThe following explains the statistics screen composition and features.


Group List Displays the device group list.

Statistics Items

y [Power] Button: You can check the power consumption of each group and total power consumption.

y [RunTime] Button: You can check the operating time and the total operating time of indoor units in each group.

Query Unit

y [Monthly] Button: Queries on monthly consumption within the last four months.

y [Daily] Button: Queries on daily consumption within the query period.

69EN

GLIS

HUSING THE PROGRAM


Query Period

Selection Area

y Selects the period for which you want to query statistics details for daily.

y The start date should be no more than 31days before the end date.

Displays Statistics

Information

y Statistics data per period: Displays power consumption per unit of query or operation time statistics and graphs.

y Power consumption: Displays power consumption and use time.

[Table]/[Graph]

Button

Converting Statistics Data View y Table: Views the queried statistics data in a table

format. y Graph: Views the queried statistics data in a graphic

format.

[Initial Date]

Button

y Selects Statistics Reference Date. y Move to Settings > General Settings > Statistics

Reference Date.

[Email] Button

y ACP, ACP Lonworks, AC Smart Premium: Sends the queried statistics data to the Email address registered in the Preference menu.

y ACP BACnet: Not supported.

[Save to PC] or [Save to USB]

button

y ACP, ACP Lonworks: Save the statistics data to a PC.

y AC Smart Premium (Web): Save the statistics data to a PC.

y AC Smart Premium (Controller): Save the statistics data to a USB memory stick.


Querying StatisticsYou can query the power consumption of a device or operation time statistics data as follows.

1. In the main menu, click(touch) the [Statistics] menu icon.2. Click(Touch) the device group you want from the group list.3. Click(Touch) the button of the statistics item you want.

[Power] Button: You can check the power consumption of each group and total power consumption.

[RunTime] Button: You can check the operating time and the total operating time of indoor units in each group.

70

ENG

LISH

USING THE PROGRAM

4. In the query period selection area, click(touch) the date button and [+]/[-] button to select the desired period. The start date should be no more than 31days for daily before the end date. The query period

for monthly is automatically fixed to the last four months. 5. Check the statistics details in the statistics information display area.

To change the statistics information view type, click(touch) the [Table] or [Graphic] button.

6. To send the statistics data by email, click(touch) the [Email] button. To save it to a PC or a USB memory stick, click(touch) the [Save to PC] or [Save to USB] button.

Notes

The statistics data is stored up to 6 months.

Notes

y Devices which can query the Run Time: Indoor units

y Devices which can query the Power consumption: devices which can be used with the PDI (For further information about the devices can be used with the PDI, please refer to the PDI manual.)

71EN

GLIS

HUSING THE PROGRAM

ReportThe following explains how to query the device control information or error information.

Report screen composition and featuresThe following explains the report screen composition and features.


Report Items

Selects report query items. y [Total] Button: Queries all reports regarding control

and error. y [Control] Button: Queries control related reports

only. y [Error] Button: Queries error related reports only.

Query Period

Selection Area

y Selects the period for which you want to query report details.

y The starting date should be no more than three months from the ending date.

Report detail display

area Displays the reports related to control and error.

[Delete Report]

Button Deletes the selected report.

72

ENG

LISH

USING THE PROGRAM


[Send Email] Button

y ACP, ACP Lonworks, AC Smart Premium: Sends the queried reports to the Email address registered in the Preference menu.


[Save to PC] or [Save to USB]

button

y ACP, ACP Lonworks: Save the reports to a PC. y AC Smart Premium (Web): Save the reports to

a PC. y AC Smart Premium (Controller): Save the

reports to a USB memory stick. y ACP BACnet: Not supported.

73EN

GLIS

HUSING THE PROGRAM

Querying ReportYou can query the device control or error report as follows.

1. In the main menu, click(touch) the [Report] menu icon.2. In the report item, click(touch) an item for which you want to query a report.

[Total] Button: Queries all reports regarding control and error. [Control] Button: Queries control related reports only. [Error] Button: Queries error related reports only.

3. In the query period selection area, click(touch) the date button and [+]/[-] button to select the desired period. The starting date should be no more than three months from the ending date.

4. Check the report details in the report detail display area.

5. To send the report detail by email, click(touch) the [Send Email] button. To save it to a PC or a USB memory stick, click(touch) the [Save to PC] or [Save to USB] button.

Caution

You can query up to 200 reports and email/save to USB memory up to 300 reports. Up to 5000 reports are stored.

74

ENG

LISH

USING THE PROGRAM

InstallingYou can add a device or change the settings of a registered device.

Registering DeviceAfter installing Central Controller, log into Central Controller to register the devices to be connected.

Central Controller can register a device by using one of two methods.

Registering Device Automatically Registering Device Manually

Notes

To register a device on Central Controller, you should login with administrator permissions. If you have logged in already with standard user permissions, you cannot proceed with this process any further.

75EN

GLIS

HUSING THE PROGRAM

Registering Device Automatically

Devices connected to Central Controller are automatically searched for and registered. You can register a device automatically as follows.

1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Installing] tab.3. Click(Touch) the [Auto Search] button.

Notes

Please turn the screen saver off before [Auto Search].

4. When you are prompted to confirm the setting, click(touch) [Confirm]. It takes 5 to 10 minutes to register a device automatically. Please turn the screen saver off

before [Auto Search]

76

ENG

LISH

USING THE PROGRAM

5. To save the searched devices, click(touch) the [Apply] button. Device registration is completed. 2 DIs and 2 DOs are always added to the Unit Status area

as they are part of the Central Controller hardware.

Registering Device Manually

Devices connected to Central Controller can be registered by the user by entering relevant information. You can register a device manually as follows.

1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Installing] tab.3. Type the device information and click(touch) the [Insert] button.

Item Description

Device Type

Selects a device type. y IDU(indoor unit,), ODU(Outdoor unit,), ERV(Energy Recovery Ventilator ),

ERV DX(Direct Expansion Energy Recovery Ventilator ), DI/DO, DOKIT, AWHP, or AHU

Unit Name (20 Characters)

Enter the device name. y Up to 20 characters.

Address (00-FF)

Type the central control of the device. y A central control value is a number between 00 and FF. You cannot

type the same value for similar devices. y You cannot enter a duplicate value for indoor devices and DOKIT.

Model (20 Characters)

Type the device model. y Up to 20 characters.

77EN

GLIS

HUSING THE PROGRAM

Item Description

Capacity (5-digit)

Type the maximum power consumption of the device. y Up to 5 characters. y The power consumption value of the actual device cannot exceed

the input value.

4. To save the device, click(touch) the [Apply] button. Device registration is completed.

Changing Device

You can change the settings of registered devices.

1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Installing] tab.3. Click(Touch) a device to be changed in the device list.

The device information is displayed in the device information input box.4. Type the device information and click(touch) the [Modify Unit] button.

The changed device information is applied.5. To save a change, click(touch) the [Apply] button.

Deleting Device

Follow these steps to delete a device from the list.

1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Installing] tab.3. In the device list, click(touch) a device to be deleted and click(touch) the [Del Unit] button.4. When you are prompted to confirm the deletion, click(touch) [Confirm].

The selected device is deleted from the list.5. To save a change, click(touch) the [Apply] button.

78

ENG

LISH

USING THE PROGRAM

Managing DeviceThe following explains how to manage the information for a device added to the system.

Adding Groups

Follow these steps to add a new group.

1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Grouping] tab.3. Click(Touch) the [Add Group] button.4. When the window to type a group name is displayed, enter a group name and click(touch) the

[Confirm] button. The group is added to the group list.

5. In Grouping, click(touch) the group added in Step 4.

79EN

GLIS

HUSING THE PROGRAM

6. In the non-registered device area, click(touch) a device to add to the new group and click(touch) the [Add] button. The selected device is moved to the registered device area.

7. To complete group creation, click(touch) the [Apply] button. When all non-registered devices are registered, the [Apply] button is enabled.

80

ENG

LISH

USING THE PROGRAM

Changing Group Name


1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Grouping] tab.3. In the device management list, click(touch) a group whose name you want to change and

click(touch) the [Rename] button.

4. Enter a new group name and click(touch) the [Confirm] button. The group name is changed.

81EN

GLIS

HUSING THE PROGRAM

Deleting Groups


1. In the main menu, click(touch) the [Installing] menu icon.2. Click(Touch) the [Grouping] tab.3. In the device management list, click(touch) a group to be deleted and click(touch) the [Del

Group] button.


82

ENG

LISH

USING THE PROGRAM

EnvironmentThe following explains how to configure the system environment for user convenience and how to check an already configured environment.

Item ACP ACP Lonworks ACP BACnet AC Smart Premium

General Setting O O O O

Screen Setting X X X O

Advance Setting O O O O

Customer Setting O O O O

Network Setting X X X O

E-Mail Setting O O X O

TMS Setting O O O O

Channel Setting O O X O

83EN

GLIS

HUSING THE PROGRAM

General SettingThe following explains how to configure the general system environment.

Item Description

LanguageConfigures the language displayed on the screen ((Korean)/English/Italiano/Espao/Portugus/p/Franais/DeutschSprache/Trke/JzykPolski)

Time setting Configures system time.

Date setting Configures system date.

Temperature display Configures the temperature unit.

Initial date for statistics Configures the reference date for querying statistical data.

Rates per 1kWh Configures the charge per 1kWh and currency.

Holiday setting (The day schedule is

not work)Selects the days for which schedules are not be applied.

Version Information Displays the current software version.

84

ENG

LISH

USING THE PROGRAM

Language

Configures the language displayed on the screen.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Language.4. Click(Touch) a language you want.

The selected language is applied as the system language.

85EN

GLIS

HUSING THE PROGRAM

Time setting

You can configure the time used for the system as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Time setting.4. Apply the current time and click(touch) the [Apply] button.

Click(Touch) [+]/[-] button to select the time. Click(Touch) the [AM]/[PM] button to select before or after midday.

Date setting

You can configure the date used for the system as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Date setting.4. Modify the pattern configuration information and click(touch) the [Apply] button.

Use [+]/[-] button to select a date.

86

ENG

LISH

USING THE PROGRAM

Temperature display

You can select a temperature system as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Temperature display.4. Click(Touch) the temperature system you want.

When selecting the Celsius system, in the Minimum Celsius() Temperature window, click(touch) the minimum temperature.

87EN

GLIS

HUSING THE PROGRAM

Initial date for statistics

Statistics Reference Date is the date for calculating the indoor unit's operation time by month. The operation time from this date through the previous date to the same date of the next month is calculated and provided as statistical data. You can configure Statistics Reference Date as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Initial date for statistics.4. [+]/[-] button to select a date you want and [Apply] button.

Rates per 1kWh

You can configure the charge per kWh and the currency as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Rates set.4. Configure the charge/kWh configuration information and click(touch) [Apply] button.

rates per(1kWh): Charge per 1kWh. Currency: Click(Touch) [] button to select the desired currency.

88

ENG

LISH

USING THE PROGRAM

Holiday setting(The day schedule is not work)

The following explains how to register an exception date or how to delete a registered date.

Adding Exception Date

You can add a desired exception date as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Holiday setting(Days in which the schedule is

ignored). The Exception Date Configuration window opens.

4. Type a name for the exception date in the exception date input box.5. [+]/[-] button to select an exception date.6. To add the selected exception date, click(touch) [Add].

The exception date is registered on the exception date list.7. To complete Exception Date Configuration, click(touch) the [Apply] button.

89EN

GLIS

HUSING THE PROGRAM

Deleting Exception Date

You can delete a registered exception date as follows.

1. In the main menu, click(touch) the [Environment]menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Holiday setting(Days in which the schedule is

ignored). The Exception Date Configuration window opens.

4. Click(Touch) an exception date in the exception date list, and click(touch) the [Delete] button.5. To complete Exception Date Configuration, click(touch) the [Apply] button.

Version Information

You can check the current version of the software as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) General Setting.3. In the detailed settings list, click(touch) Version Information.

The current version of the system is displayed in a popup window.

90

ENG

LISH

USING THE PROGRAM

Screen Setting (AC Smart Premium Only)The following explains how to configure the use environment regarding the product screen.

Item Description

Setting a Screen saver Determines whether to use a screen saver

Screen saver Configures information to be displayed on the screen saver (operation status)

Waiting time (minutes) Select the standby time that the screen saver waits before operation.

Speaker setting Determines whether to use a speaker

Monitor power settings Determines whether to use monitor power-off function

Turn off the monitor waiting time(minutes) Selects the standby time that the monitor waits before turn-off

Calibrating the Screen Screen calibration for accurate click(touch)

91EN

GLIS

HUSING THE PROGRAM

Setting a Screen saver

You can configure the screen saver as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) Setting a Screen saver.

Enable, the check box turns red and the Screen Saver and Waiting time (minutes) are enabled.

92

ENG

LISH

USING THE PROGRAM

Waiting time (minutes)

You can configure the standby time that the screen saver waits before operation.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) the Waiting time (minutes).4. In the Standby Time Configuration window, click(touch) the standby time.

93EN

GLIS

HUSING THE PROGRAM

Speaker setting

You can configure the speaker setting as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the setting list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) Speaker setting.

Enable, the check box turns red and the Speaker is enabled.

94

ENG

LISH

USING THE PROGRAM

Monitor power settings

You can configure the monitor to turn off automatically, if the click(touch) screen is not used for a certain period of time. You can configure this function as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) Monitor power settings.

Enable, the check box turns red and Turn off the monitor waiting time (minutes) is enabled.

95EN

GLIS

HUSING THE PROGRAM

Turn off the monitor waiting time (minutes)

You can configure the monitor to turn off automatically, if the click(touch) screen is not used for a certain period of time, as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) Turn off the monitor waiting time (minutes).4. Click(Touch) the standby time you desire.

Calibrating the Screen

You can calibrate the screen for accurate click(touch) response as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Screen Setting.3. In the detailed settings list, click(touch) Calibrating the Screen.4. To start the screen calibration, click(touch) the [Start screen calibration] button.

5. When the crosses appear on the screen, click(touch) the center of each to calibrate.

96

ENG

LISH

USING THE PROGRAM

Advance SettingThe following explains how to configure the functions necessary for device operation.

Item Description

LGAP setting(AC Smart Premium

Only)

y Master: Central Controller is used independently. y Slave: It shares the communication line with other central

controller products.(If multiple Central Controllers are used, one should be selected as Master and the others as Slave. In slave mode, some functions of Auto Search in the Installing menu are not available.)

Peak/Demand set

y Peak Control: You can use the peak control feature in the auto logic menu.

y Demand Control: You can use the demand control feature in the auto logic menu.

Set the operation mode

y Priority Control: In Peak/Demand Control menu, control the devices based on the priority of the group.

y Outdoor Unit Capacity Control: In the Peak/Demand Control menu, control the outdoor capacity rate per unit.

Temperature difference

for Setback/AutoChangeOver

[+]/[-] button to select the temperature gap.

Update S/W y Software upgrade using a USB memory stick. y Complete upgrade and restart the system.

DB backup Backup the DB onto a USB memory stick.

Recovery DB Use the DB stored on the USB memory stick to restore the system.

97EN

GLIS

HUSING THE PROGRAM

LGAP setting

Central Controller can interface with another central controller to control a device. You can configure the interface type with other devices as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Advance Setting.3. In the detailed settings list, click(touch) LGAP setting.4. Click(Touch) a type you want.

Master: Central Controller is used independently. Slave: It shares the communication line with other central controller products.

Notes

If multiple Central Controllers are used, one should be selected as Master and the others as Slave.

Peak/Demand set

You can select a control type to be used for auto logic.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Advance Setting.3. In the detailed settings list, click(touch) Peak/Demand set.4. Click(Touch) a control type to be used for auto logic

Peak Control: You can use the peak control feature in the auto logic menu. Demand Control: You can use the demand control feature in the auto logic menu.

98

ENG

LISH

USING THE PROGRAM

Set the operation mode

You can configure the operation type as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Advance Setting.3. In the detailed settings list, click(touch) Set the operation mode.4. Click(Touch) an operation type you want.

Temperature difference for Setback/AutoChangeOver

You can configure the temperature gap for auto changeover operation.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Advance Setting.3. In the detailed settings list, click(touch) Temperature difference for Setback/

AutoChangeOver.4. [+]/[-] button to select a temperature gap you want and [Apply] button.

99EN

GLIS

HUSING THE PROGRAM

Update S/W

You can upgrade the current version of software as follows.

Notes

y To update the software, you need a USB memory stick which has patch.tar file in the ramdisk folder.

y For standard thumb drives, a USB to mini USB cable is required.

1. Connect the USB memory to Central Controller.2. In the main menu, click(touch) the [Environment] menu icon.3. In the Settings list, click(touch) Advance Setting.4. In the detailed settings list, click(touch) Update S/W.5. When the software update window appears, click(touch) the [Update S/W] button.

When the update has been completed, the program restarts.

100

ENG

LISH

USING THE PROGRAM

DB backup

You can backup the database stored in the system to USB memory as follows.

1. Connect the USB memory to Central Controller.2. In the main menu, click(touch) the [Environment] menu icon.3. In the Settings list, click(touch) Advance Setting.4. In the detailed settings list, click(touch) DB backup.5. When the DB Backup window appears, click(touch) the [DB backup] button.

Recovery DB

You can use the database stored on USB memory to restore the system database.

1. Connect the USB memory stick to Central Controller.2. In the main menu, click(touch) the [Environment] menu icon.3. In the Settings list, click(touch) Advance Setting.4. In the detailed settings list, click(touch) Recovery DB.5. When the DB Recovery window appears, click(touch) the [Recovery DB] button.

When the DB recovery has been completed, the program restarts.

101EN

GLIS

HUSING THE PROGRAM

Customer SettingOnly the administrator account can change user environments.

Item Description

Change Password Only the administrator account can change the password.

Add user Add up to 30 new system users.

User Management y [Delete] Button: Deletes a user. y [Edit] Button: Changes user information.

102

ENG

LISH

USING THE PROGRAM

Change Password

The system_admin account password can be changed as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Customer Setting.3. In the detailed settings list, click(touch) Change Password.4. After entering the current and new passwords, click(touch) [Confirm].

Current P/W: Enter the current password. New P/W: Enter the new password for system_admin.. Re-type P/W: Enter the new password to confirm that the new password has been entered

correctly.

103EN

GLIS

HUSING THE PROGRAM

Add user

You can add a user as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Customer Setting.3. In the detailed settings list, click(touch) Add User.4. When the system password input window appears, enter the password and click(touch) [Confirm].

5. When the Add a New User window appears, enter the user information and click(touch) [Confirm]. ID: Enter the user's ID for the email server. Password: Enter the login password. Password 'Confirm': Re-enter the password. User Role: Select the user permission you want Accessable Group: Select a controllable device group

Notes

Use is limited depending on the user.

y General user menu: Control/Monitor, Schedule, Statistics for assigned Groups/Units

y Administrator menu: Control/Monitor, Schedule, AutoLogic, Statistics, Report, Installing for all Groups/Units

104

ENG

LISH

USING THE PROGRAM

User Management

The following explains how to delete a registered user or edit user information.

Deleting User Information

You can delete a registered user's information as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Customer Setting.3. In the user list, click(touch) the [Delete] button for the user information you want to delete.

4. When the system password input window appears, enter the password and click(touch) [Confirm]. The user information is deleted.

5. To complete user delete, click(touch) [Confirm].

105EN

GLIS

HUSING THE PROGRAM

Editing User Information

You can edit a registered user's information as follows.

1. In the main menu, click(touch) the [Environment] menu icon.2. In the Settings list, click(touch) Customer Setting.3. In the user list, click(touch) the [Edit] button for the user information you want to edit.

4. When the system password input window appears, enter the password, click(touch) [Confirm].

Documents

Centralna Kontrola Uputsvo Eng