CENTRALNA PUTNA LABORATORIJA - cpl.rscpl.rs/wp-content/uploads/2014/05/CPL-Katalog-2014.pdf · specijalno opremljenom poslovnom objektu u svemu prema zahtevima evropskih standarda

member of ”NIEVELT Group” GmbH

CENTRALNA PUTNA LABORATORIJAwww.cpl.rs

Akreditovana laboratorija prema SRPS ISO/IEC 17025:2006 za ispitivanje građevinskih materijala (laboratorije za bitumen, bitumenske emulzije i hidroizolacije; kamen i kameni agregat; asfalt; geomehaniku i fundiranje; beton i cement; građevinski čelik; konstrukcije i mostove)Akreditovano sertifikaciono telo prema SRPS EN 45011:2004 za sertifikaciju proizvoda i proizvodnje(frakcionisani kameni agregat)Licenca za projektovanje i stručni nadzor autoputeva, državnih puteva I i II reda, aerodroma, mostova i inženjerskih objekata izdata od strane nadležnog Ministarstva Vlade Republike SrbijeAccredited testing laboratory according to SRPS ISO/IEC 17025:2006 for testing of civil engineering materials (laboratories for bitumen, bitumen emulsions and waterproofing; stone and stone agreggate; asphalt; geomechanics and foundations; concrete and cement; construction steel; structures and bridges)Accredited certification body according to SRPS EN 45011:2004 for certification of products and production (stone agreggate fractions)Licence for design and supervision of highways, I and II class state roads, airports, bridges and structures issued by the relevant Ministry of the Government of Serbia

Sadržaj

04 o nama

08 organizacija

10 Sertifikati i licence

12 akreditovane laboratorije

24 akreditovano Sertifikaciono telo

26 Sektori za konSultantSke uSluge, nadzor i projektovanje

30 lokacija

content

06 about uS

08 organization

10 certificateS and licenSeS

12 accredited laboratorieS

24 accredited certification body

26 departmentS for conSultancy ServiceS, SuperviSion and deSign ServiceS

30 location

4 5

o NaMa

”CENTRALNA PUTNA LABORATORIJA” DOO (CPL) je kompanija za konsultantske usluge u oblasti izgradnje i projektovanja puteva, aerodroma, železnica, mostova i ostalih građevinskih objekata. Sastavljena je od sedam akreditovanih laboratorija za ispitivanje građevinskih materijala, akreditovanog sertifikacionog tela za sertifikaciju proizvoda i pet sektora za konsultantske usluge, nadzor i projektovanje.

CPL kao akreditovana i licencirana institucija poseduje sledeće sertifikate i licence:• akreditovana laboratorija za ispitivanje (akreditaciono telo Srbije - aTS broj 01-180), • akreditovano sertifikaciono telo (akreditaciono telo Srbije - aTS broj 04-014),• Licenca za projektovanje i stručni nadzor autoputeva, puteva I i II reda, aerodroma i mostova (Ministarstvo za prostorno planiranje i životnu sredinu, Vlada Republike Srbije (P112G2, P131G2 i P132G1, broj 351-02-00356/2010-07))

Kompanija je kao posebno i nezavisno pravno lice nastala udruživanjem više od 40 godina iskustva u laboratorijskim ispitivanjima građevinskih materijala, konsultantskim i projektnim uslugama na srpskom tržištu i na evropskom tržištu zajedno sa kompanijom ”NIEVELT Labor / Ingenieur” GmbH iz Beča, austrija.

Visoka stručnost zaposlenih, dobra opremljenost i dobra laboratorijska praksa čine osnovuprofesionalnog pristupa kojim se ostvaruje dobar odnos sa korisnicima konsultantskih, projektnih i laboratorijskih usluga. Stalnim usavršavanjem u novim tehnologijamai aktivnim učešćem u naučno-istraživačkom radu, CPL nudi svojim korisnicima jako uporište u pripremi i osavremenjavanju metodologija primene građevinskih materijala.

o NaMa

AKREDITOVANE LABORATORIJE I SEKTORI:

CPL se sastoji od sedam akreditovanih laboratorija za ispitivanje prema SRPS ISo/IEC 17025:2006, akreditovanog sertifikacionog tela prema standardu SRPS EN 45011:2004 i pet sektora za konsultantske i projektne usluge.

• Laboratorija za bitumen, bitumenske emulzije i hidroizolacije• Laboratorija za kamen i kameni agregat• Laboratorija za asfalt• Laboratorija za geomehaniku i fundiranje• Laboratorija za beton i cement• Laboratorija za metal• Laboratorija za ispitivanje konstrukcija i mostova• Sertifikaciono telo

• Sektor za nadzor i project management• Sektor za projektovanje kolovoznih konstrukcija• Sektor za projektovanje puteva• Sektor za projektovanje mostova i konstrukcija• Sektor za geotehniku

CPL se nalazi u namenski sagrađenom i specijalno opremljenom poslovnom objektu u svemu prema zahtevima evropskih standarda. Projekat objekta i laboratorije je urađen u saradnji sa austrijskim stručnjacima iz kompanije ”NIEVELT Labor / Ingenieur” GmbH. CPL poseduje mobilne laboratorije za geomehaniku, beton i asfalt lociranih na više velikih gradilišta u Srbiji, dok je sa stalnim ogrankom odnosno predstavništvom prisutna u Beogradu.

”NIEVELT Labor / Ingenieur” GmbH je licencirana konsultantska firma i akreditovana laboratorija za ispitivanje građevinskih

materijala, akreditovano kontrolno telo i akreditovana laboratorija za etaloniranje sa sedištem u Beču (Stockerau), austrija, koja je sa svojim predstavništvima i/ili partnerskim - ćerka firmama prisutna u Nemačkoj, Italiji, Češkoj, Rusiji, Poljskoj, Slovačkoj, Gruziji i u Srbiji.

”NIEVELT Labor / Ingenieur” GmbH je između ostalih trenutno aktivan u svojoj delatnosti na velikim poslovima izgradnje i održavanja puteva, železnica i objekata visokogradnje u Kini, Kuvajtu, Iranu, azerbejdžanu, Libanu, Gruziji, avganistanu...

6 7

aBouT uSaBouT uS

”CENTRAL ROAD LABORATORY” LLC (CPL) is company for consulting services in the field of construction and designing of roads, airports, railways, bridges and other civil engineering constructions. It is composed from the seven accredited testing laboratories for civil engineering construction materials, accredited certification body for product certification and five departments for consultancy services, supervision and design services.

CPL as accredited and licensed institution posses following certificates and licenses:• accredited testing laboratory (accreditation Board of Serbia - aTS number 01-180)• accredited certification body (accreditation Board of Serbia - aTS number 04-014)• License for design and supervision on highways, I and II class state roads, airports and bridges

(Ministry for spatial planning and environment, Government of Republic Serbia, (P112G2, P131G2 and P132G1,No 351-02-00356/2010-07)

Company has been formed by associating more than 40 years of experience in laboratory testing of construction materials, consultancy and design services within the Serbian market and the European market with ”NIEVELT Labor / Ingenieur” GmbH from Vienna, austria.

High professional skills of the employees and modern equipment as well as good laboratory practice are the basis of a professional approach for achieving good relationships with the users of consultancy, designing and laboratory testing services. Constant training in new technologies and active participation in research work have enabled CPL to offer to its users a stronghold in preparation and modernization of the methodology of application of civil engineering construction materials.

CPL is located in intentionally built and specially equipped building and premises all in accordance with the requirements of the European standards. Laboratory design was performed together with the austrian experts from the ”NIEVELT Labor / Ingenieur” GmbH company. CPL has a mobile laboratories for geomechanics, concrete and asphalt located on several large construction sites in Serbia, while with the permanent Branch office is present in Belgrade.

”NIEVELT Labor / Ingenieur” GmbH is an licensed consulting company, accredited testing laboratory for civil engineering construction materials, the accredited inspection body and the accredited laboratory for etalon measurements headquartered in Vienna (Stockerau), austria which has its either representative offices and/or partner - daughter companies in Germany, Italy, Check Republic, Russia, Poland, Slovakia, Georgia and in Serbia too.

”NIEVELT Labor / Ingenieur”GmbH is presently engaged in the construction and maintenance of roads, railways and high-building structures in China, Kuwait, Iran, azerbaijan, Lebanon, Georgia, afghanistan...

ACCREDITED LABORATORIES AND DEPARTMENTS:

CPL is composed of seven accredited testing laboratories according to SRPS ISo/IEC 17025:2006, accredited certification body according to the standard SRPS EN 45011:2004 and five departments for consultancy and designing services.

• Laboratory for bitumen, bitumen emulsions and waterproofing• Laboratory for stone and stone aggregate• Laboratory for asphalt• Laboratory for geomechanics and foundations• Laboratory for concrete and cement• Laboratory for steel• Laboratory for structures and bridges testing• Certification body for production certification

• Department for supervision and project management• Department for pavement design• Department for road design• Department for bridges and structure design• Department for geotechnics

Sharehoulder aSSembly

UPRAVNI ODBOR

gENERALNI DIREKTOR

general director

deputy general director

Secretariat and general department

POMOćNIK DIREKTORA zA UPRAVLJANJE PROJEKTIMA I

PRIPREMU

aSSiStant director for project management and

evaluation

LABORATORIJE zA ISPITIVANJE

teStinglaboratorieS

LABORATORIJA zA BITUMEN, BITUMENSKE EMULzIJE I

hIDROIzOLACIJE

laboratory for bitumen, bituminouS

emulSionS and waterproofing

KOMISIJA zA IzDAVANJE

SERTIfIKATA

certifying commiSSion

LABORATORIJA zA KAMEN I KAMENI

AgREgAT

laboratory for Stone and Stone aggregate

LABORATORIJA zA ASfALT

laboratoryfor aSphalt

LABORATORIJA zA gEOMEhANIKU I

fUNDIRANJE

laboratory for geomechanicS

and foundationS

SEKTOR zA NADzOR I PROJECT

MANAgEMENT

department for SuperviSion

and project management

LABORATORIJA zA BETON I

CEMENT

laboratory for concrete and

cement

SEKTOR zA PROJEKTOVANJE

KOLOVOzNIh KONSTRUKCIJA

department for pavement

deSign

LABORATORIJA zA METAL

laboratory for Steel


PUTEVA

department for road

deSign

LABORATORIJA zA ISPITIVANJE KONSTRUKCIJA I

MOSTOVA

laboratory for Structure

and bridgeS teSting


MOSTOVA I KONSTRUKCIJA

department for bridgeS

and Structure deSign

SEKTOR zA gEOTEhNIKU

department for geotechnicS

SERTIfIKACIONO TELO

certification body

SEKTOR zA KONSULTANTSKE

USLUgE, NADzOR I PROJEKTOVANJE

department for conSultancy ServiceS, SuperviSion and deSign

ServiceS

aSSiStant director for Quality and

development

managing board

SKUPŠTINAAKCIONARA

POMOćNIK DIREKTORA

zA KVALITET I RAzVOJ

SEKRETARIJAT I OPŠTI POSLOVI

zAMENIK gENERALNOg DIREKTORA

8 9

oRGaNIzaTIoNoRGaNIzaCIja

CPL se sastoji od sedam akreditovanih laboratorija prema SRPS ISo/IEC 17025:2006, nezavisnog akreditovanog sertifikacionog tela prema standardu SRPS EN 45011:2004 i pet sektora za konsultantske usluge, nadzor i projektovanje.

CPL is composed of seven accredited laboratories according to SRPS ISo/IEC 17025:2006, an independent accredited certification body according to the standard SRPS EN 45011:2004. and five departments for consultancy services, supervision and design services.

10 11

CERTIfICaTES aND LICENSESSERTIfIKaTI I LICENCE

Sertifikat i rešenje o akreditaciji sedam Laboratorija za ispitivanje prema SRPS ISo/IEC 17025:2006 za preko 350 ispitnih metoda prema SRPS i EN standardima izdato od strane aTS - akreditacionog tela SrbijeCertificate and Schedule of accreditation of seven testing Laboratories according to standards SRPS ISo/IEC 17025:2006 with more than 350 testing methods according to SRPS and EN standards issued from the side of aTS - accreditation Board of Serbia

Sertifikat i rešenje o akreditaciji Sertifikacionog tela za obavljanje poslova sertifikacije proizvoda prema SRPS EN 45011:2004 izdato od strane aTS - akreditacionog tela Srbije

Certificate and Schedule of accreditation of Certification body for product certification according to SRPS EN 45011:2004 issued from the side of aTS - accreditation Board of Serbia

Licenca za projektovanje i stručni nadzor autoputeva, državnih puteva I i II reda, aerodroma i mostova izdata od strane Ministarstva za prostorno planiranje i životnu sredinu, Vlada Republike Srbije, (P112G2, P131G2 i P132G1, broj 351-02-00356/2010-07)

License for design and supervision on highways, I and II class state roads, airports and bridges (Ministry for spatial planning and environment, Government of Republic Serbia, (P112G2, P131G2 and P132G1,No 351-02-00356/2010-07)

12 13

aCCREDITED LaBoRaToRIESaKREDIToVaNE LaBoRaToRIjE

Laboratorija za bitumen,bitumenske emulzije i hidroizolacije

Laboratory for bitumen, bituminous emulsions and waterproofing

Osnovne delatnosti laboratorije su:

• ispitivanje bitumena i polimer modifikovanih bitumena,• ispitivanje bitumenskih emulzija i hidroizolacija,• ispitivanje razređenih bitumena,• interna kontrola kvaliteta u postrojenjima za proizvodnju bitumena, polimer

modifikovanih bitumena i bitumenskih emulzija (stalna ili periodična kontrola),• konsultantske usluge pri proizvodnji i upotrebi svih vrsta ugljovodoničnih

veziva,• atestiranje i sertifikacija proizvodnje bitumena i ostalih ugljovodoničnih veziva,• dinamička ispitivanja reoloških svojstava bitumena i polimer modifikovanih

bitumena prema en standardima, itd.

Basic activities of this laboratory are as follows:

• testing of bitumen and polymer modified bitumen,• testing of bituminous emulsions and waterproofing,• testing of diluted bitumen,• internal quality control in plants for the production of bitumen, polymer modified bitumen and bituminous emulsions (permanent and periodical

control),• consulting services at the production and use of all types of

carbohydrate binders,• attestation and certification of the bitumen production and other carbo

hydrate binders,• dynamic laboratory testing of rheological properties of bitumen and

polymer modified bitumen according to en standards, etc.

14 15


Laboratorija za kamen i kameni agregat Laboratory for stone and stone aggregate


• ispitivanje fizičko mehaničkih karakteristika kamena i kamenih agregata,

• ispitivanja minerološko petrografskog sastava kamena i kamenih agregata,

• hemijska ispitivanja kamena,• ocena kvaliteta i mogućnosti upotrebe kamena i kamenih

agregata,• interna kontrola kvaliteta proizvodnje kamena i kamenih agregata

u kamenolomima, separacijama, drobiličnim postrojenjima i svim vrstama eksploatacije prirodnih materijala,

• atestiranje i sertifikacija proizvodnje kamena i kamenih agregata, itd..


• testing of physical and mechanical properties of stone and stone aggregate,

• testing of mineralogical and petrographic properties of stone and stone aggregate,

• chemical testing of stone,• assessment of quality and possibilities for the use of stone and stone aggregate,• internal quality control of the production of stone and stone

agregate in crushing stone producing quarries, separations, crushing plants

and all types of exploitations of natural materials,• attestation and certification of the production of stone and

stone aggregate, etc.

16 17

Laboratorija za asfalt Laboratory for asphalt


• ispitivanje kvaliteta asfaltnih mešavina pre i posle ugradnje za potrebe kontrole, projektovanja i izgradnje svih vrsta asfaltnih slojeva,

• uzimanje uzoraka asfalta iz kolovoza kernovanjem i isecanjem ploča za potrebe laboratorijske analize,

• obrada uzoraka asfalta, kamena i betona dijamantskim testerama,• interna kontrola kvaliteta proizvodnje asfalta na asfaltnim bazama

(stalna ili periodična kontrola),• izrada prethodnih mešavina za asfalt betone, bitumenizirane noseće

slojeve, Sma, površinske obrade, mikroasfalte i ostale vrste vrućih, toplih i hladnih asfaltnih mešavina,

• izrada radnih mešavina na asfaltnim bazama,• konsultantske usluge pri izvođenju asfalterskih radova,• ispitivanja fundamentalnih mehaničkih karakteristika asfaltnih mešavina

prema en standardima (kolotrag, zamor, moduli), itd.


• Quality testing of asphalt mixes before and after laying down for the needs of quality control (Qc/Qa), designing and construction of all types of asphalt layers,

• Sampling from asphalt pavement by coring and cutting out blocks for the need of laboratory analysis,

• processing of samples of asphalt, stone and concrete with diamond saws,• internal quality control of the asphalt production on asphalt plants (permanent

and periodical control),• production of job mix trials (preliminary asphalt mixture design) for asphalt

concrete, bituminous base courses, Sma, surface treatments, micro-asphalts, and other types of hot, warm and cold asphalt mixtures,

• production of working mixtures on asphalt plants,• consulting services at carrying out asphalt works,• fundamental mechanical characteristics laboratory testing of asphalt mixtures

according to en standards (rutting, fatigue, modulus), etc.


18 19


Laboratorija za geomehaniku i fundiranje

Laboratory for geomechanics and foundations


• on site and laboratory testing of the quality and placement of soil and all kind of unbound materials,

• testing of soil on site by test trial pits and boring and static penetration for the needs of the foundation of structures and buildings (standard penetration test (Spt), trial boring with self driving drilling machine till depth of 400m, static - cone penetration test (cpt) 20t),

• production of geomechanical studies for foundation of structures,• on site testing with dynamic cone penetrometer (dcp) of unbound pavement layers,• taking of disturbed and undisturbed samples of soil and their laboratory testing,• laboratory testing of soil and unbound materials samples,• consulting services at carrying out of all types of earth works,• production of geotechnical bases for all phases of the production of design-technical

documentation for roads, railways, bridges and buildings,• production of geological profiles,• investigation works (trial pits and coring) and laboratory testing, for determination of

structure and materials quality in pavement layers, etc.• ground penetrating radar non destructive survey of geotechnical profiles and pavement

structures,• pile in soil integrity testings with equipment for ultrasonic measurement (ultrasonic soundness

(hammer) method or ultrasonic crosshole testing - low strain integrity test)• pile in soil testings - trial load testings with load 10.000kn and deformation measurement.


• terensko i laboratorijsko ispitivanje kvaliteta i ugradnje tla i nevezanih materijala,• terensko ispitivanje tla sondažnim bušenjem i statičkim penetracijama za potrebe fundiranja

objekata,• izrada geomehaničkih elaborata za potrebe fundiranja objekata (test standardne penetracije

(Spt), istražno bušenje sa samohodnom bušećom garniturom do dubine od 400m, test statičke penetracije (cpt) 20t),

• terensko ispitivanja dinamičkim konusnim penetrometrom (dcp) nevezanih slojeva kolovoza,• uzimanje poremećenih i neporemećenih uzoraka tla i ispitivanje u laboratoriji,• ispitivanje uzoraka tla i nevezanih materijala u laboratoriji,• konsultantske usluge pri izvođenju svih vrsta zemljanih radova,• izrada geotehničkih podloga za sve faze izrade projektno tehničke dokumentacije objekata

niskogradnje i visokogradnje,• izrada geoloških profila,• istražni radovi (sondažne jame i sondažne bušotine) i laboratorijska ispitivanja za potrebe

određivanja strukture i kvaliteta materijala u slojevima kolovozne konstrukcije,• Snimanje geotehničkih profila i kolovozne konstrukcije nedestruktivnom metodom pomoću

georadara,• ispitivanje šipova u tlu - ispitivanje integriteta šipova sa opremom za ultrazvučna ispitivanja

(ultrazvučna metoda zvukom - čekićem ili ultrazvučna metoda za ispitivanje integriteta sondama u cevima),

• ispitivanje šipova u tlu - probno opterećenje šipova opterećenjem 10.000kn i merenje deformacija do loma.

20 21



• ispitivanje fizičko mehaničkih karakteristika neočvrslog i očvrslog betona,• ispitivanje komponentnih materijala betona (cement, kameni agregat, voda, aditivi),• isptivanje uticaja svih vrsta aditiva na kvalitet betona,• praćenje kvaliteta proizvodnje na fabrikama betona (stalna ili periodična kontrola) i

izrada izveštaja o kontroli proizvodne sposobnosti betonske baze,• praćenje kvaliteta komponentnih materijala na fabrikama betona (stalna ili

periodična kontrola),• projektovanje prethodnih receptura (prethodne mešavine) za beton, malter,

injekcione smeše i specijalne betonske mešavine,• ocena postignute marke betona pri proizvodnji na fabrikama betona (statistička

analiza),• uzorkovanje na gradilištu i fabrikama betona, nega i ispitivanje betonskih kocki kao

i izvođenje ispitivanja na već formiranim i odnegovanim uzorcima dostavljenih od strane trećih lica,

• ispitivanje fizičko mehaničkih karakteristika cementa, kreča i gipsa,• hemijska ispitivanja cementa, kreča i gipsa,• analiza upotrebljivosti i konsultantske usluge sa ciljem poboljšanja kvaliteta pri

proizvodnji i ugradnji svih vrsta betona,• analiza upotrebljivosti i konsultantske usluge pri korišćenju svih vrsta cementa,• ispitivanje i sertifikacija prefabrikovanih betonskih elemenata: šuplji betonski

blokovi za zidanje, betonski crep, betonske ploče za popločavanje, behaton ploče, betonski ivičnjaci i sl.,

• ispitivanje i sertifikacija opekarskih proizvoda: crepovi od gline, opeka i blokovi od gline, puna i šuplja opeka, krečno silikatni blokovi i sl.


• testing of physical and mechanical characteristics of non-hardened (fresh) and hardened concrete,

• testing of componental materials of concrete (cement, stone aggregate, water, additives),

• testing of influence of all types of additives on to the concrete quality,• concrete production quality control on concrete plants (permanent and periodical

control) (Qc/Qa) and control of production capability of concrete plants,• Quality control of component materials in concrete plants (permanent and periodical

control) (Qc/Qa),• preliminary concrete mixtures design (job mix trial) for concrete, mortar, injection

mixtures and special concrete mixtures,• evaluation of achieved compressive strength of concrete at the production process

on concrete plants (statistical analysis),• Sampling at the construction site and concrete plants, curing and testing of concrete

cubes as well as testing of already prepared and cured samples delivered by third parties,

• examination of physical and mechanical characteristics of cement, lime and gypsum,• chemical testing of cement, lime and gypsum,• analysis of usability and consulting services with the aim of improvement the

quality at the production and placement of all types of concrete,• analysis of usability and consulting services at using all types of cement,• testing and certification of production of prefabricated concrete elements: hollow

concrete tiles and bricks, concrete tile, concrete blocks and flat stones, concrete kerb etc.,

• testing and certification of: clay tile, clay bricks and blocks, solid and hollow bricks, lime silicate blocks and bricks etc.

Laboratorija za beton i cement

Laboratory for concrete and cement

22 23


• Ispitivanje mostova i konstrukcija probnim opterećenjem prema SRPS u.M1.046 i odgovarajućim EN standardima,

• Monitoring procesa građenja, izgrađenih mostova i ponašanja konstrukcije,• Ispitivanje konstrukcija visokogradnje probnim opterećenjem i ispitivanje do loma

prema SRPS u.M1.047 i odgovarajućim EN standardima,• Ispitivanje i određivanje nosivosti prefabrikovanih gredica od glinenih elemenata,

merenje lokalnih i opštih deformacija i sile loma prema standardu SRPS u.N8.030 i odgovarajućim EN standardima (atestiranje),

• Ispitivanje konstrukcijskih elemenata u laboratoriji i na terenu.


• Ispitivanje fizičko mehaničkih karakteristika građevinskog čelika (zatezna čvrstoća, žilavost - Sharpy, otpornost na savijanje itd.),

• Stalno ili periodično ispitivanje dostavljenog građevinskog čelika,• Stalna ili periodična kontrola proizvodnje čelika za potrebe proizvođača.

Laboratorija za ispitivanje mostova i konstrukcija

Laboratorija za metal



• Trial load testings of bridges and structures according to SRPS u.M1.046 and related EN standards,

• Construction process and finished bridges monitoring and structure behavior measurement,

• Testing of high building structures with trial loads and testing till breaking according to SRPS u.M1.047 and related EN standards

• Testings of prefabricated concrete elements, measurement of deformation and force of breaking according to SRPS u.N8.030 and related EN standards,

• Testing of structural elements of structures in laboratory and on site.


• Testing of physical and mechanical characteristics of construction steel (tensile strength, toughness strength by Sharpy, flexion resistance etc.),

• Permanent or periodical testing of delivered steel on construction steel,• Permanent or periodical testing of steel production for producers.

Laboratory for structure and bridges testingLaboratory for steel

24 25

aCCREDITED CERTIfICaTIoN BoDyaKREDIToVaNo SERTIfIKaCIoNo TELo

OSNOVNE DELATNOSTI SERTIfIKACIONOg TELA SU:

• Sertifikacija proizvodnje kamena i kamenog agregata prema srpskim zakonski propisanim procedurama i izdavanje atesta za proizvode sa periodom validacije od 6 meseci

BASIC ACTIVITIES Of CERTIfICATION BODY ARE AS fOLLOwS:

• Certification of production of stone and stone aggregate according to Serbian Law procedures and providing of attests for products with validation on 6 months

26 27

DEPaRTMENTS foR CoNSuLTaNCy SERVICES, SuPERVISIoN aND DESIGN SERVICESSEKToRI za KoNSuLTaNTSKE uSLuGE, NaDzoR I PRojEKToVaNjE

SEKTOR zA NADzOR I PROJECT MANAgEMENT:

• Stručni nadzor nad izvođenjem radova na izgradnji autoputeva, državnih puteva I i II reda, aerodroma, mostova i objekata (prema domaćem zakonodavstvu i prema svim vrstama fIDIC/PRaG ugovora),

• Konsultantske usluge za Investitore i Izvođače radova sa ciljem smanjenja troškova i vremena potrebnog za izvođenje radova putem optimizacije tehnologije građenja,

• Konsultantske usluge sa ciljem rešavanja odštetnih zahteva na relaciji Izvođač - Investitor,• Izrada ugovorne i Tenderske dokumentacije za sve vrste infrastrukturnih projekata,• Tumačenje ugovorne dokumentacije na projektima finansiranim od strane međunarodnih

bankarskih institucija prema pravilima fIDIC/PRaG ugovora,• Praćenje koštanja (cost control) objekata sa svim potrebnim analizama,• Praćenje i tumačenje implementacije uslova ugovora (Contract engineering/management),• Merenja i obračun izvršenih ili ugovorenih radova (Quantity Surveying),• Kontrola kvaliteta izvedenih radova i odgovarajuća ekspertiza(QC/Qa) itd.

DEPARTMENT fOR SUPERVISION AND PROJECT MANAgEMENT:

• Supervision of construction works on construction of highways, I and II class state roads, airports, bridges and structures (according to domestic legislation and according to all types of fIDIC/PRaG contracts),

• Consultancy services for Employer and Contractor with overall aim of cost reducing and reducing of time for construction works execution by the optimization of construction technology,

• Consultancy services for resolving Claims on relation Contractor - Employer,• Contract and Tender documentation preparation for all kinds of infrastructure projects,• analysis of Contract documentation on projects which are financed from the side of

International financial Institutions according to fIDIC/PRaG contracts,• Cost control of structures including all necessary analyses,• Monitoring and construal of agreement terms and conditions implementation (contract

engineering/management),• Measuring and calculation of performed or contracted works (Quantity Surveying),• Quality control of performed works and relevant expert opinion (QC/Qa) etc.

SEKTOR zA PROJEKTOVANJE KOLOVOzNIh KONSTRUKCIJA:

• Kontinualno snimanje funkcionalnih i strukturnih karakteristika kolovoznih konstrukcija multifunkcionalnim vozilom:

- Digitalna video kamera visoke rezolucije za snimanje oštećenosti površine kolovoza i putnog inventara,- Podužna ravnost (IRI) - laserska greda na prednjem delu vozila,- Poprečna ravnost (Laserska greda) - dubina kolotraga i deformacije poprečnog profila,- Trenje, makro i mikro tekstura,- Struktura kolovozne konstrukcije - Georadar (GPR) montiran na zadnjem delu vozila,- GPS koordinate puta odnosno osovine kolovoza i geometrije puta,

• Merenje nosivosti kolovozne konstrukcije Deflektometrom sa padajućim teretom (DyNaTEST, falling Weight Deflectometer ili Heavy Weight Deflectometer) fWD i /ili HWD,

• Kontinualno merenje stanja horizontalne i vertikalne saobraćajne signalizacije specijalizovanim uređajem zENTHER,

• Izrada elaborata o stanju kolovoza i obrada rezultata specijalizovanim softverom (RoadDoctor),

• Izmene i dopune postojeće projektne dokumentacije,• Izrada svih faza projektno tehničke dokumentacije (generalnih, idejnih, glavnih projekata)

projekti rehabilitacije• rekonstrukcije kolovoznih konstrukcija itd.

DEPARTMENT fOR PAVEMENT DESIgN:

• Continual measurement of functional and structural pavement characteristics with multifunctional vehicle:

- Digital video camera with high resolution for pavement damages and road inventory surveying,

- Longitudinal roughness (IRI) - laser beam mounted on vehicle,- Cross profile evenness (Laser beam) - ruth depth and deformation measurement,- Skid resistance, macro and micro texture continual measurement,- Pavement structure and layers nondestructive surveying - Georadar (Ground

Penetrating Radar - GPR) mounted on vehicle,- GPS coordinates and road centerline and geometry surveying,

• Pavement bearing capacity measurement with falling Weight Deflectometer or Heavy Weight Deflectometer (fWD or HWD, Dynatest),

• Continual measurement of condition of horizontal and vertical traffic signalization with specialized vehicle and equipment (Producer: zENTHER, Switzerland),

• Expert reports for existing pavement condition and results evaluation with specialized software (RoadDoctor),

• Changes and appendices of existing design documentation,• Production of all phases of design technical documentation (general, preliminary, detailed

designs) and designs for pavement rehabilitation - reconstruction etc.

28 29

DEPaRTMENTS foR CoNSuLTaNCy SERVICES, SuPERVISIoN aND DESIGN SERVICESSEKToRI za KoNSuLTaNTSKE uSLuGE, NaDzoR I PRojEKToVaNjE

DEPARTMENT fOR ROAD DESIgN:

• development of general, preliminary, detailed, contractor and as built designs,

• development of feasibility studies and reports,• performing of design check and review works (expert and technical

control of designs),• performing engineering• design supervision during carrying out of construction etc.

DEPARTMENT fOR BRIDgES AND STRUCTURE DESIgN:

• development of design and technical documentation (general, preliminary, detailed, and as build designs) for carrying out of structures

• development of design and technical documentation for structure renovation,

• technical control of design and technical documentation,• engineering• design supervision implementation,• consulting services as requested by Contractor.

DEPARTMENT fOR gEOTEChNICS:

• geotechnic analyses and reports for general, preliminary, and detailed designs

• geotechnic analyses and reports for general, preliminary, and detailed designs of rehabilitation and reconstruction of pavement structures,

• consulting services in the area of quality and production of all types of geotechnicmaterial for construction, rehabilitation, and maintenance of pavement structures,

• technical specifications for performing geotechnical works,• development of designs of landslide rehabilitation (unstable terrain),• calculation of stability of slopes and evaluation of geotechnic

conditions of facility founding,• geomechanic analyses for the purposes of founding constructions

(bridges, buildings...)

SEKTOR zA PROJEKTOVANJE PUTEVA:

• izrada generalnih, idejnih, glavnih i izvođačkih projekata i projekata izvedenog stanja,

• izrada studija opravdanosti i elaborata,• vršenje stručne i tehničke kontrole projekata,• vršenje projektantskog nadzora u toku izgradnje objekata itd.

SEKTOR zA PROJEKTOVANJE MOSTOVA I KONSTRUKCIJA:

• izrada projektno tehničke dokumentacije (idejnih, glavnih projekata i projekata izvedenog stanja) za izgradnju mostova i objekata,

• izrada projektno tehničke dokumentacije za sanaciju mostova i objekata,• tehnička kontrola projektno tehničke dokumentacije,• vršenje projektantskog nadzora,• konsultantske usluge za potrebe izvođača radova.

SEKTOR zA gEOTEhNIKU:

• izrada geotehničkih elaborata i izveštaja za potrebe generalnih, idejnih i glavnih projekata,

• izrada geotehničkih elaborata i izveštaja za potrebe idejnih i glavnih projekata rehabilitacije i rekonstrukcije kolovoznih konstrukcija,

• konsultantske usluge iz oblasti kvaliteta i proizvodnje svih vrsta geotehničkih materijala za izgradnju, rehabilitaciju i održavanje kolovoznih konstrukcija,

• tehnički uslovi za potrebe izvođenja geotehničkih radova,• izrada projekata sanacija klizišta,• proračun stabilnosti kosina i ocena geotehničkih uslova fundiranja objekata,• geomehanički elaborati za potrebe fundiranja konstrukcija (mostovi, zgrade...) itd.

30

LoCaTIoNLoKaCIja

SEDIŠTE CENTRALNE PUTNE LABORATORIJE se nalazi u ulici Živorada Petrovića 13, 21203 Veternik, Novi Sad, Srbija

CPL je projektovan i građen u saradnji sa austrijskim stručnjacima iz ”NIEVELT Labor / Ingenieur” GmbH prema zahtevima evropskih standarda u pogledu kvaliteta izvođenja građevinskih radova i elektro instalacija, načina opremanja objekta, sigurnosnih sistema (protiv požarni sistem, protiv provalni sistem), ekologije, zaštite na radu, jedinstveni informacioni sistem i baza podataka, šema funkcionisanja proizvodnih procesa u laboratoriji itd.

ThE MAIN OffICE Of CENTRAL ROAD LABORATORY is in the street Živorad Petrović no.13,21203 Veternik, Novi Sad, Serbia

CPL laboratory and offices has been designed and built in cooperation with the austrian professionals from ”NIEVELT Labor / Ingenieur” GmbH according to the European standards with regard to quality of construction works as well as electrical installations, equipment, security system (anti-fire system, system against burglary), environment, protection at work, unique information system and data base, chart of functioning of production process in the laboratory etc.

centralna putna laboratorija doomember of ”NIEVELT Group” GmbH

Živorada Petrovića 13, 21203 Veternik, Novi Sad, SrbijaTelefon: 021 820 170, 021 820 180,

021 820 190 | fax: 021 820 181e-mail: [email protected]

www.cpl.rs

Documents

CENTRALNA PUTNA LABORATORIJA - cpl.rscpl.rs/wp-content/uploads/2014/05/CPL-Katalog-2014.pdf · specijalno opremljenom poslovnom objektu u svemu prema zahtevima evropskih standarda