33
Chapter 6 Economic Growth and International Trade 刘刘刘刘刘刘刘刘刘刘刘刘刘

Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Embed Size (px)

Citation preview

Page 1: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Chapter 6 Economic Growth

and International Trade

刘芹

广东省省级精品课程《国际贸易》

Page 2: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Chapter 6

Economic Growth and

International Trade

Page 3: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

After studying this chapter, you should be able to:

(1) Describe how the growth and development takes place over time

(2) Compare the effects of import substitution and export orientation in development

(3) Know what Rybzynski Theorem is

(4) Understand Dutch disease and illustrate immiserizing growth.

Page 4: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Aside from trade based on technological gaps and product cycles, which is dynamic in nature. That is, given the nation’s factor endowments, technology, and tastes, we proceeded to determine the nation’s comparative advantage and the gains from trade. However, factor endowments change over time; technology usually improves; and tastes may also change. As a result, the nation’s comparative advantage also changes over times.

In this chapter, we extend our trade model to incorporate these changes. We show how a change in factor endowments and/or an improvement in technology affect the nation’s production frontier. These changes, together with possible changes in tastes, affect the nation’s PPF, the volume and the terms of trade, and the gains from trade.

Page 5: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

§1 The connotation of economic growth

There are three concepts about economic growth:

(1) the increase in real total output;(2) the increase in per captia real output;(3) the increase in capacity which can supplies

various kinds of economic products and results from a change in factor endowments, an improvement in technology and an adjustment in system and value.

Page 6: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Economic growth rate= ( Yt-Yt-1) /Yt-1

Well-known Cobb - Douglas production function: X=AKαL1-α

Economic growth affects international trade through supply and demand. First, we will talk about the change in demand and trade.

Page 7: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

§2 Changes in demand and international trade

There is a close relationship between people's income levels and changes in demand, which results in some impacts on trade. According to Engel Law, we can explore these impacts.

Page 8: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

The nineteenth-century Prussian statistician Ernst Engel believed: the average behavior of consumption expenditure does change fairly regularly with income, that is Engel Effect. Especially, we call it Engel Law if the expenditure proportion of food will be less and less with the income increasing.

Obviously, Engel's Law means that food’s Engel Effect is negative.

Page 9: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Engle had studied the food, but if we put this issue extended to the entire trade of primary products, particularly agricultural products, we will find the significance of Engel Effect.

American economists W.A.Lewis and C.P.Kinderberger made an empirical study and concluded: Primary products (agricultural and mineral products) exporting country's terms of trade gradually deteriorated with economic growth, because people's income level increase, preference shifted to greater demand for manufactured goods, which leads to the decline of primary products prices. Now importing the same quantity of manufactured goods needs exporting more primary products.

Page 10: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

§3 Factors Growth with International Trade

Over time, nations grow through increases in the size of their labor force (L), the accumulation of capital (investments), including human capital (K), and the improvements in technology or technical progress (T).

We Assume that: (1) All labor and capital are homogeneous; (2) X is L-intensive and Y is K-intensive; (3) Nations experience growth in the production of X and Y under constant returns to scale and with technology remaining constant.

Page 11: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.1 Balanced Growth An increase in the endowment of labor and

capital over time causes the nation’s production frontier to shift outward. The type and degree of the shift depend on the rate at which L and K grow.

If L and K grow at the same rate, the nation’s production frontier will shift out evenly in all directions at the rate of factor growth. As a result, the slope of the old and new production frontiers will be the same at any point where they are cut by a ray from the origin. This is the case of balanced growth.

Page 12: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》
Page 13: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

It shows the case of balanced growth with L and K doubling under constant returns to scale and unchanged technology. The maximum amount of each commodity also doubles, from 140X to 280X or from 70Y to 140Y. The two production frontiers (before and after growth) have identical shapes so that the slope of the two PPF, or Px/Py, is the same at such points as B and B’, where they are cut by a ray from the origin.

Page 14: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.2 Unbalanced Growth If only the endowment of L grows, the output of

both commodities grows because L is used in the production of both commodities and L can be substituted for K to some extent in the production of both commodities. However, the output of commodity X grows faster than the output of commodity Y. The opposite is true if only the endowment of K grows. If L and K grow at different rates, the outward shift in the nation’s production frontier can similarly be determined. This is unbalanced growth.

Page 15: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》
Page 16: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

It shows two additional production frontiers---one with only L doubling (solid line) and the other with only K doubling (dashed line).

When only L doubles, the production frontier shifts more along the X-axis, measuring the L-intensive commodity. If only K doubles, the production frontier shifts more along the Y-axis, measuring the K-intensive commodity.

Note that when only L doubles, the maximum output of commodity X does not double (i.e., it only rises from 140X to 275X). Similarly, when only K doubles, the maximum output of commodity Y less than doubles (from 70Y to 130Y).

Page 17: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.3 Import Substitution Growth

S2

steel

rice

Small Nation’s Model

Page 18: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

rice

A large nation can obtain not only the economic growth, but also the benefit resulting from the improvement in terms of trade.

Steel Large Nation’s Model

Page 19: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.4 Export Orientation Growth

Steel

Rice

Small Nation’s Model

Page 20: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.5 the Rybczynski Theorem

The theorem postulates that at constant prices, an increase in the endowment of one factor will increase by a greater proportion the output of the commodity intensive in that factor and will reduce the output of the other commodity.

Page 21: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

With trade but before growth, Nation 1 produces at point B (130X and 20Y) at PX/PY=PB=1. After only L doubles and with PX/PY remaining at PB=1, Nation 1 produces at point M (270X and 10Y) on its new and expanded production frontier. Thus, the output of X expanded and the output of Y declined, as postulated by the Rybczynski theorem.

Page 22: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

The proof is as follows. For commodity prices to remain constant with the growth of one factor, factor prices must also remain constant. Only if K/L and the productivity of L and K also remain constant in the production of both commodities. The only way is for the output of Y to fall in order to release enough K (and a little L) to absorb all of the increase in L in the production of X. Thus, the output of X rises while the output of Y declines.

In fact, the increase in the output of X expands by a greater proportion than the expansion in the amount of labor because some labor and capital are also transferred from the production of Y to X. this is called the magnification effect.

Page 23: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Edgeworth Box

XY

E

E’

Y’

X’

L’0

K’

K

Page 24: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

3.6 Immiserizing Growth and Dutch Disease Generally, economic growth will benefit the

society more or less. However, unbalanced growth will bring bad effects to economy under some special conditions.

One is Dutch disease, that is, the increase in the production of X will lead to the decline of Y. The name is derived from the Netherlands’ loss of relative competitiveness in its traditional industrial sector as a result of the appreciation of Dutch florin after the development of the Dutch natural gas industry. It is a typical case of the Rybczynski theorem.

Page 25: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

The other situation was called immiserizing growth by Jagdish Bhagwati. It is the situation where a nation’s terms of trade deteriorate so much as a result of growth that the nation is worse off after growth than before, even if growth without trade tends to improve the nation’s welfare.

Page 26: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

With an increase in the supply of labor only, Nation 1’s PPF shifts out proportionately more along the X-axis than along the Y-axis. With growth, Nation 1 exports more of X but its terms of trade deteriorate from PB=1 to PC=1/5, so that Nation 1 produces at point C, exports 100X for only 20Y, and consumes at G on indifference curve II (which is lower than indifference curve III before growth.)

Page 27: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Conditions for Immiserizing Conditions for Immiserizing GrowthGrowth Growth tends to increase nation 1’s exports

substantially at constant terms of trade. Nation 1 is large so that the attempt to expand

its exports substantially will cause a deterioration in its terms of trade.

The income elasticity of Nation 2’s demand for nation 1’s export is very low, so that Nation 1’s terms of trade will deteriorate substantially.

Nation 1 is so heavily dependent on trade that a substantial declining in its terms of trade will lead to a reduction in national welfare.

Page 28: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

§4 Technical Progress’ Impact on International Trade

4.1 definitions and types The most appropriate definitions of technical

progress are those advanced by John Hicks, the British economist who shared the 1972 Nobel Prize in economics.

Technical progress is usually classified into neutral, labor saving, or capital saving. All technical progress (regardless of its type) reduces the amount of both labor and capital required to produce any given level of output.

Page 29: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Neutral technical progress increases the productivity of L and K in the same proportion, so that K/L remains the same after the neutral technical progress as it was before at unchanged relative factor prices (w/r).

Labor-saving technical progress increases the productivity of K proportionately more than the productivity of L. As a result, K is substituted for L in production and K/L rises at unchanged w/r.

Capital-saving technical progress increases the productivity of L proportionately more than the productivity of K. As a result, L is substituted for K in production and K/L falls at unchanged w/r.

Page 30: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Technical Progress and the Production Frontier: All types of technical progress cause the PPF to shift outwards. The type and degree of the shift depend on the type and rate of technical progress in either or both commodities.

0X

Y

A0

B0

A2

B2

A1

B1B3

A3

Page 31: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Key Terms

Balanced growth Immiserizing growth Labor/capital saving technical progress Neutral technical progress Rybczynski theorem

Page 32: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Questions for Review What effect do the various types of factor

growth have on the growing nation’s production frontier?

Explain neutral, labor saving and capital saving technical progress?

Which type of growth will most likely lead to a decline in the nation’s welfare? What is meant by immiserzing growth? Which type of growth will most likely lead to an increase in the nation’s welfare?

Page 33: Chapter 6 Economic Growth and International Trade 广东省省级精品课程《国际贸易》

Classical Trade TheoryAbsolute Advantage Theory

Comparative Advantage Theory

Neo-classical Trade Theory(H-O Model)

H-O Theorem

H-O-S Theorem(Factor-price Equalization Theorem)

Reciprocal Demand Theorem

Specific-factor Model

Stolper-Samuelson Theorem

Leontief Paradox

Modern Trade Theory

Intra-industry Trade theoryBased on Economy of Scaleand Incomplete Competitiveness

Technological Gap theorem and Product Cycle Theory

Overlapping Demand Theory(Preference Similarity Theory)

Economic Growth and Trade

Demand: Engel Law

Supply: Rybczyski Theorem(Dutch Disease and ImmiserizingGrowth)

Improvement in Technology