Upload
-ted-knoy
View
224
Download
0
Embed Size (px)
Citation preview
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
1/13
Unit Two : Ensure Subject
and Verb Agreement
http://www.chineseowl.idv.tw
http://www.chineseowl.idv.tw/http://www.chineseowl.idv.tw/8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
2/13
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
3/13
: A number of innovative
developments ( has , have ) been
made in the multi-componentinjection molding process in recent
years.
:have
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
4/13
: A gas channel design that ( guides ,
guide ) the gas flow to the desired
locations ( is , are ) one of the keyfactors that determine a successful
application.
: guides, is
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
5/13
: The delay time along with gas
injection points ( is , are ) importantin producing injection-molded parts
of quality.
:is
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
6/13
: Neither the processing
parameters nor the amount of
polymer melt injection solely( determine , determines ) a
successful gas channel design.
: determines
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
7/13
: To select the number and locations
of gas injection points and todetermine the amount of polymer
melt injection ( is , are ) essential
to a successful application.
: are
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
8/13
: Ergonomics ( aim , aims ) to
integrate worker comfort and
productivity.
: aims
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
9/13
: Each of the factors ( contribute ,
contributes ) to a successful design.
: contributes
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
10/13
: The simulation in which the
polymer melt flow ( occurs , occur )in thin cavities ( provides , provide )
accurate predictions.
: occurs, provides
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
11/13
: Establishing a general model or
empirical formula in addition to
describing the thickness variation of theskin melt that exists between the
gas/melt interface and the cavity wall
( appear , appears ) to be necessary for
further development.
: appears
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
12/13
: The number of gas injection points
( are , is ) important in producing
quality injection-molded parts.
: is
8/14/2019 Clarity 02:Ensure Subject and Verb Agreement ( )
13/13
:() ():http://www.chineseowl.idv.tw
http://www.chineseowl.idv.tw/http://www.chineseowl.idv.tw/http://www.chineseowl.idv.tw/