Embed Size (px)
Citation preview
RENGØRINGSVEJLEDNING
For komposit materialer
Danish HealthcareDesign A/SDrejøvej 8
9500 Hobro
+45 9851 [email protected]
CVR nr. 64194615
Side 1 af 2
CLEANING INSTRUCTIONS SOLID SURFACE MATERIAL
RENGØRINGSVEJLEDNING FORKOMPOSIT MATERIALER
Beskrivelse:
Kompositmaterialer er smudsaf-visende, holdbare og meget let at
vedligeholde. På grund af den ikke porøse overflade og de næsten
usynlige limfuger er det let at ren-gøre dette materiale.
Komposit materialer - The Surface Material
Side 2 af 2
Solid surface material is stain-resistant, durable and very easy to main-tain. Due to the porous surface and the nearly joint-free manufacturing process, this material is easy to clean. Basic Care
Any soiled areas should be cleaned immediately or, at the latest, within 24 hours. Use a damp sponge cloth and an all-purpose cleaner. For heavy soiling, use a liquid abrasive.
You can remove calciferous build-up (limescale) with vinegar cleaners (acidic) or other commercial limescale removers.
Daily Cleaning
To remove light stains and other marks, a damp cloth or cleaning spon-ge and a mild detergent are sufficient.
For all matt finishes you can safely use a liquid abrasive (not for polis-hed surfaces!).
After using detergents, rinse with enough clean water to keep any dirt residue from remaining on the surface.
Solid Surface Material:
The Surface MaterialBasic Cleaning / Intensive Cleaning
Tougher stains caused by substances such as wine, tea, coffee, food colou-ring, fruit and vegetable juices and many other stains can easily be remo-ved with a bleaching agent (do not leave these on the surface for more than five minutes!). Afterwards, clean the surface with a commercial all-purpose cleaner and rinse with clean water.
You can easily remove nail polish with nail polish remover (without acetone) or a liquid abrasive agent.
You can also remove minor burn or nicotine stains easily with a liquid abrasive cleaner or abrasive sponge. If the finish of the surface becomes somewhat matt, you can restore the shine with a finely granulated cleaning sponge.
Tips and Tricks
When you clean a surface made with solid surface material, it is important that you avoid using cleaning agents that contain acid (for example, methy-lene chloride or acetone). If one of these products accidentally comes into contact with the surface, wash the area thoroughly with soapy water as a precaution to prevent any discoloration.
Do not place objects that come hot from the stove or oven directly onto the surface of worktops made with solid surface material; this stresses the material and cracks could appear. For this reason, you should always use a coaster. When you pour boiling liquids into solid surface sinks or basins, you should also run cold water into them at the same time.
Solid surface material is able to cope well with the demands of daily life. For long-lasting enjoyment of your worktop, we strongly recommend that you use a cutting board or similar product when cutting foods to avoid scratching the surface.
Kompositmaterialer er smudsafvisende, holdbare og me-get let at vedligeholde. På grund af den ikke porøse over-flade og de næsten usynlige limfuger er det let at rengøre dette materiale.
Grundlæggende rengøring
Eventuelle snavsede områder skal rengøres straks, eller senest inden 24 timer. Brug en fugtig svamp eller klud, samt et universal rengøringsmiddel. Ved kraftig tilsmuds-ning skal du bruge et flydende let slibende rengørings-middel.
Du kan fjerne kalkaflejringer med eddike, eller andre almindelige kalkfjernere der findes i handlen.
Daglig rengøring
For at fjerne lyse pletter og andre mærker, er en fugtig klud eller svamp til rengøring, samt et mildt rengørings-middel tilstrækkeligt.
På alle matte overflader kan du trygt bruge et flydende let slibende rengøringsmiddel. (Ikke på polerede overfla-der)
Efter anvendelse af rengøringsmidler, skylles efter med rent vand, så alt snavs er helt fjernet fra overfladen.
Komposit materialer
The Surface Material
Solid surface material is stain-resistant, durable and very easy to main-tain. Due to the porous surface and the nearly joint-free manufacturing process, this material is easy to clean. Basic Care
Any soiled areas should be cleaned immediately or, at the latest, within 24 hours. Use a damp sponge cloth and an all-purpose cleaner. For heavy soiling, use a liquid abrasive.
You can remove calciferous build-up (limescale) with vinegar cleaners (acidic) or other commercial limescale removers.
Daily Cleaning
To remove light stains and other marks, a damp cloth or cleaning spon-ge and a mild detergent are sufficient.
For all matt finishes you can safely use a liquid abrasive (not for polis-hed surfaces!).
After using detergents, rinse with enough clean water to keep any dirt residue from remaining on the surface.
Solid Surface Material:
The Surface MaterialBasic Cleaning / Intensive Cleaning
Tougher stains caused by substances such as wine, tea, coffee, food colou-ring, fruit and vegetable juices and many other stains can easily be remo-ved with a bleaching agent (do not leave these on the surface for more than five minutes!). Afterwards, clean the surface with a commercial all-purpose cleaner and rinse with clean water.
You can easily remove nail polish with nail polish remover (without acetone) or a liquid abrasive agent.
You can also remove minor burn or nicotine stains easily with a liquid abrasive cleaner or abrasive sponge. If the finish of the surface becomes somewhat matt, you can restore the shine with a finely granulated cleaning sponge.
Tips and Tricks
When you clean a surface made with solid surface material, it is important that you avoid using cleaning agents that contain acid (for example, methy-lene chloride or acetone). If one of these products accidentally comes into contact with the surface, wash the area thoroughly with soapy water as a precaution to prevent any discoloration.
Do not place objects that come hot from the stove or oven directly onto the surface of worktops made with solid surface material; this stresses the material and cracks could appear. For this reason, you should always use a coaster. When you pour boiling liquids into solid surface sinks or basins, you should also run cold water into them at the same time.
Solid surface material is able to cope well with the demands of daily life. For long-lasting enjoyment of your worktop, we strongly recommend that you use a cutting board or similar product when cutting foods to avoid scratching the surface.
Kompositmaterialer er smudsafvisende, holdbare og me-get let at vedligeholde. På grund af den ikke porøse over-flade og de næsten usynlige limfuger er det let at rengøre dette materiale.
Grundlæggende rengøring
Eventuelle snavsede områder skal rengøres straks, eller senest inden 24 timer. Brug en fugtig svamp eller klud, samt et universal rengøringsmiddel. Ved kraftig tilsmuds-ning skal du bruge et flydende let slibende rengørings-middel.
Du kan fjerne kalkaflejringer med eddike, eller andre almindelige kalkfjernere der findes i handlen.
Daglig rengøring
For at fjerne lyse pletter og andre mærker, er en fugtig klud eller svamp til rengøring, samt et mildt rengørings-middel tilstrækkeligt.
På alle matte overflader kan du trygt bruge et flydende let slibende rengøringsmiddel. (Ikke på polerede overfla-der)
Efter anvendelse af rengøringsmidler, skylles efter med rent vand, så alt snavs er helt fjernet fra overfladen.
Komposit materialer
The Surface Material
Solid surface material is stain-resistant, durable and very easy to main-tain. Due to the porous surface and the nearly joint-free manufacturing process, this material is easy to clean. Basic Care
Any soiled areas should be cleaned immediately or, at the latest, within 24 hours. Use a damp sponge cloth and an all-purpose cleaner. For heavy soiling, use a liquid abrasive.
You can remove calciferous build-up (limescale) with vinegar cleaners (acidic) or other commercial limescale removers.
Daily Cleaning
To remove light stains and other marks, a damp cloth or cleaning spon-ge and a mild detergent are sufficient.
For all matt finishes you can safely use a liquid abrasive (not for polis-hed surfaces!).
After using detergents, rinse with enough clean water to keep any dirt residue from remaining on the surface.
Solid Surface Material:
The Surface MaterialBasic Cleaning / Intensive Cleaning
Tougher stains caused by substances such as wine, tea, coffee, food colou-ring, fruit and vegetable juices and many other stains can easily be remo-ved with a bleaching agent (do not leave these on the surface for more than five minutes!). Afterwards, clean the surface with a commercial all-purpose cleaner and rinse with clean water.
You can easily remove nail polish with nail polish remover (without acetone) or a liquid abrasive agent.
You can also remove minor burn or nicotine stains easily with a liquid abrasive cleaner or abrasive sponge. If the finish of the surface becomes somewhat matt, you can restore the shine with a finely granulated cleaning sponge.
Tips and Tricks
When you clean a surface made with solid surface material, it is important that you avoid using cleaning agents that contain acid (for example, methy-lene chloride or acetone). If one of these products accidentally comes into contact with the surface, wash the area thoroughly with soapy water as a precaution to prevent any discoloration.
Do not place objects that come hot from the stove or oven directly onto the surface of worktops made with solid surface material; this stresses the material and cracks could appear. For this reason, you should always use a coaster. When you pour boiling liquids into solid surface sinks or basins, you should also run cold water into them at the same time.
Solid surface material is able to cope well with the demands of daily life. For long-lasting enjoyment of your worktop, we strongly recommend that you use a cutting board or similar product when cutting foods to avoid scratching the surface.
Kompositmaterialer er smudsafvisende, holdbare og me-get let at vedligeholde. På grund af den ikke porøse over-flade og de næsten usynlige limfuger er det let at rengøre dette materiale.
Grundlæggende rengøring
Eventuelle snavsede områder skal rengøres straks, eller senest inden 24 timer. Brug en fugtig svamp eller klud, samt et universal rengøringsmiddel. Ved kraftig tilsmuds-ning skal du bruge et flydende let slibende rengørings-middel.
Du kan fjerne kalkaflejringer med eddike, eller andre almindelige kalkfjernere der findes i handlen.
Daglig rengøring
For at fjerne lyse pletter og andre mærker, er en fugtig klud eller svamp til rengøring, samt et mildt rengørings-middel tilstrækkeligt.
På alle matte overflader kan du trygt bruge et flydende let slibende rengøringsmiddel. (Ikke på polerede overfla-der)
Efter anvendelse af rengøringsmidler, skylles efter med rent vand, så alt snavs er helt fjernet fra overfladen.
Komposit materialer
The Surface MaterialSolid surface material is stain-resistant, durable and very easy to main-tain. Due to the porous surface and the nearly joint-free manufacturing process, this material is easy to clean. Basic Care
Any soiled areas should be cleaned immediately or, at the latest, within 24 hours. Use a damp sponge cloth and an all-purpose cleaner. For heavy soiling, use a liquid abrasive.
You can remove calciferous build-up (limescale) with vinegar cleaners (acidic) or other commercial limescale removers.
Daily Cleaning
To remove light stains and other marks, a damp cloth or cleaning spon-ge and a mild detergent are sufficient.
For all matt finishes you can safely use a liquid abrasive (not for polis-hed surfaces!).
After using detergents, rinse with enough clean water to keep any dirt residue from remaining on the surface.
Solid Surface Material:
The Surface MaterialBasic Cleaning / Intensive Cleaning
Tougher stains caused by substances such as wine, tea, coffee, food colou-ring, fruit and vegetable juices and many other stains can easily be remo-ved with a bleaching agent (do not leave these on the surface for more than five minutes!). Afterwards, clean the surface with a commercial all-purpose cleaner and rinse with clean water.
You can easily remove nail polish with nail polish remover (without acetone) or a liquid abrasive agent.
You can also remove minor burn or nicotine stains easily with a liquid abrasive cleaner or abrasive sponge. If the finish of the surface becomes somewhat matt, you can restore the shine with a finely granulated cleaning sponge.
Tips and Tricks
When you clean a surface made with solid surface material, it is important that you avoid using cleaning agents that contain acid (for example, methy-lene chloride or acetone). If one of these products accidentally comes into contact with the surface, wash the area thoroughly with soapy water as a precaution to prevent any discoloration.
Do not place objects that come hot from the stove or oven directly onto the surface of worktops made with solid surface material; this stresses the material and cracks could appear. For this reason, you should always use a coaster. When you pour boiling liquids into solid surface sinks or basins, you should also run cold water into them at the same time.
Solid surface material is able to cope well with the demands of daily life. For long-lasting enjoyment of your worktop, we strongly recommend that you use a cutting board or similar product when cutting foods to avoid scratching the surface.
Kompositmaterialer er smudsafvisende, holdbare og me-get let at vedligeholde. På grund af den ikke porøse over-flade og de næsten usynlige limfuger er det let at rengøre dette materiale.
Grundlæggende rengøring
Eventuelle snavsede områder skal rengøres straks, eller senest inden 24 timer. Brug en fugtig svamp eller klud, samt et universal rengøringsmiddel. Ved kraftig tilsmuds-ning skal du bruge et flydende let slibende rengørings-middel.
Du kan fjerne kalkaflejringer med eddike, eller andre almindelige kalkfjernere der findes i handlen.
Daglig rengøring
For at fjerne lyse pletter og andre mærker, er en fugtig klud eller svamp til rengøring, samt et mildt rengørings-middel tilstrækkeligt.
På alle matte overflader kan du trygt bruge et flydende let slibende rengøringsmiddel. (Ikke på polerede overfla-der)
Efter anvendelse af rengøringsmidler, skylles efter med rent vand, så alt snavs er helt fjernet fra overfladen.
Komposit materialer
The Surface Material
Eventuelle snavsede områder skal rengøres straks, eller senest inden 24 timer. Brug en fugtig svamp eller klud, samt et universal rengøringsmiddel. Ved kraftig tilsmudsning skal du bruge et flydende let slibende rengøringsmiddel.
Du kan fjerne kalkaflejringer med eddike, eller andre almindelige kalkfjernere der findes i handlen.
Grundlæggende rengøring:
For at fjerne lyse pletter og andre mærker, er en fugtig klud eller svamp til rengøring, samt et mildt rengøringsmiddel tilstrækkeligt.
På alle matte overflader kan du trygt bruge et flydende let slibende rengøringsmiddel. (Ikke på polerede overflader)
Efter anvendelse af rengøringsmidler, skylles efter med rent vand, så alt snavs er helt fjernet fra overfladen.
Daglig rengøring:
Vanskelige pletter forårsaget af stoffer så som kaffe, te, vin, frugtfarve, frugt- og røntsagssaft, samt mange andre pletter kan nemt fjernes med et blegemiddel. Blegemidler skal dog fjernes senest 5 minutter efter påføring. Herefter skal overfladen rengøres med et universal rengøringsmiddel, og der skal skylles efter med rent vand.
Du kan nemt fjerne neglelak med neglelakfjerner (uden acetone) eller et let slibemiddel.
Du kan også fjerne mindre brændemærker eller nikotinpletter med et let slibende rengøringsmiddel eller en slibende svamp. Hvis dette gør overfladefinishen mat, kan du gendanne den med en fint granuleret rengøringssvamp.
Grundlæggende rengøring/Intensiv rengøring:
Når man renser en overflade fremstillet af komposit, er det vigtigt at undgå brug af rengøringsmidler, der indeholder syre (for eksempel methylen chlorid eller acetone). Hvis et af disse produkter ved et uheld kommer i kontakt med overfladen, vaskes området grundigt med sæbevand som en forholdsregel for at forhindre enhver misfarvning.
Anbring ikke varme genstande, der kommer lige fra komfuret eller ovnen, direkte på bordplader lavet af kompositmaterialer. Revner vil da kunne forekomme, og du bør derfor altid bruge en bordskåner. Når du hælder kogende væsker i kompositvaske, skal der samtidigt løbe koldt vand fra vandhanen.
Kompositmaterialer klarer uden problemer de krav der stilles til brug i dagligdagen. For at forlænge levetiden, og undgå dybe ridser, anbefaler vi dog, at du bruger et skærebræt eller lignende når der skæres fødevarer.
Tips og tricks:
