Upload
gtlqa
View
284
Download
2
Embed Size (px)
Citation preview
7/24/2019 Company Profile - RTA
1/100
7/24/2019 Company Profile - RTA
2/100
7/24/2019 Company Profile - RTA
3/100
Pages
Introduction 1.1
Vision, Mission, Values 2.1 ~ 2.2
3.1
4.1
A. DUBAI
5.1 ~ 5.2
5.3 ~ 5.4
5.5
5.6
5.7
6.1
6.2 ~ 6.3
6.4 ~ 6.5
7.1~7.2
7.3~7.18
7.19~7.20
7.21
7.22 > Certificate No. ADU-3077 ; Geoscience Testing Laboratory , Dubai - UAE
Bureau Veritas - ISO 9001 : 2008 - Certificate No. IND13.4009U/Q1
> LB - 003 ; Geoscience Testing Laboratory , Dubai - UAE
> LB - 191 ; Geoscience Testing Laboratory , Al Quoz - UAE
Quality Registrar System - ISO 14001 : 2004 OHSAS 18001 : 2007
> Certificate No. ADU-5068 ; Geoscience Testing Laboratory , Dubai - UAE
Part 6 Dubai Quality Group
Letter of Appreciation
Newsletter
Part 7 Accreditations / Certifications
Part 1
Part 2
Part 3
Part 4 Safety Policy Statement
Certificate of Registration - Dubai Municipality - License No. 2015/023
Registrations / Licenses
Department of Economic Development (DIC) - License No.129684
TABLE OF CONTENTS
Ministry of Public Works Department - License No. 116445 -3
Certificate of Membership - Dubai Quality Group - CorporatePartner
Quality Policy Statement
Dubai Chamber of Commerce & Industries - License No. 89489
Part 5
Department of Economic Development (AL QUOZ) - License No. 587706
iii
7/24/2019 Company Profile - RTA
4/100
8.1 ~ 8.3
8.3 ~ 8.4
8.4
8.4 ~ 8.6
9.1 ~ 9.13
9.14 ~ 9.25
9.26 ~ 9.27
9.28
A.Material 10.1 ~ 10.5
10.6 ~ 10.8
Construction Material Testing ( Soil / Ground Water / Aggregates / Concrete /
Steel )
Geotechnical Investigation
Microbiology Testing (Food / Fish / Grain / Water / Water & Ice / Cosmetics
/ Sampling )
A.Physical / Mechanical
B.Chemical
C.Microbiology
Part 9 List of Testing Services
Part 10 List of Major Equipments
B.Chemical
Environmental
Part 8 List of Accredited Test
A. Dubai
D.Geotechnical
10.9
10.10 ~ 10.11
11.1 ~ 11.10
12.1 ~ 12.31
13.1
13.2
C.Technical (Dubai/Sharjah) 13.3
D. Technical ( Abu Dhabi/Al Ain) 13.4
Key Personnel 14.1 ~ 14.2
List of Major Customers 15.1 ~ 15.6
A. Administration (Dubai)
B.Administration (Dubai)
Part 14
Part 15
Part 11 List of Major Projects ( On-going )
A.Material Testing : Dubai
Part 12 List of Major Projects ( Accomplished )
Part 13 Organizational Chart
. cro o ogy
D.Geotechnical
A.Material Testing : Dubai
iv
7/24/2019 Company Profile - RTA
5/100
7/24/2019 Company Profile - RTA
6/100
2.1
VISION
Geoscience Testing Laboratory strives to deliver the best that science,
analytical research, innovation and technology could offer worldwide
because we believe that they could accomplish our vital mission faster. We
aim to be the trusted, competitive and best service provider in the field of
construction, environment, microbiology and other allied industries. Our
remarkable success for the past years remains the foundation of our
organization and inspires our efforts today for tomorrows upcoming
economic challenges globally.
MISSION
We provide our customers analytical and physical services using ingenuity
and technical expertise conforming to the requirements of international
standards leveraging emerging technologies, innovation and regulatory
laws focusing on quality workmanship. Our employees are our greatest
asset. Corporate values provide growth and development opportunities for
all employees committed to fulfilling the companys vision and for
continuous improvement in quality, processes and instrumental capability.
We deliver our services with professionalism, integrity, commitment,
punctuality and excellence inscribe in our work exceedingly meeting our
customers satisfaction. Our strategic partners are built on mutual trust. We
assure the safety and health of our employees by encouraging
improvement in workplace and making them aware of its importance.
7/24/2019 Company Profile - RTA
7/100
2.2
VALUES
We view customer commitments not only as contract but as covenant.
We certainly believe that ethics and business are compatible; thus, we
strive to motivate this belief in every aspect and direction of our services.
To better serve our customers, we are committed to providing our
employees with a safe and secure work environment in which personal
initiative is promoted and conscientious effort is rewarded. We agree to
work together as a team instead of competing against each other or
exploiting fellow workers. Hence, we commit to assist one another in an
environment of genuine care, concern and understanding.
While we work together, we acknowledge our individual uniqueness and
capabilities. We encourage each member of our team to become
continually authentic as human being. We appreciate each other for not
only what we do but for who we are. Our employees are our greatest asset.
We have grown up leaders by hard effort, which all of us must pay to
achieve our goals. In our journey to success, our professionalism has
grown up with the distinction and reputation of our organization.
GTL values the highest standard of mutual respect, professionalism,
continuous learning and practice, and the integrity in our commitment to our
stakeholders and partners.
Finally, we acknowledge that we are a learning organization, comprised of
individuals, leading professionally and endeavoring to serve the industry.
7/24/2019 Company Profile - RTA
8/100
3.1
QUALITY POLICY STATEMENT
o It is the policy of GTL to have full commitment to quality and to
provide integrity and reliability in all laboratory services fulfilling
the requirements of quality in all aspects of work, continuously
meeting or exceeding customers satisfactions.
o Execute all laboratory services meeting the standard test
methods as well as quality aspects in a timely manner
o To establish, maintain and continually improve an integrated
laboratory management system based on the requirements of
International standards of ISO/IEC 17025 and ISO 9001.
o To accord highest importance to safety, health and environmental
issues.
o GTL shall be committed to educate, familiarize and implement this
policy and established management system to all activities in the
laboratory by its personnel.
7/24/2019 Company Profile - RTA
9/100
ENVIRONMENTAL, HEALTH AND SAFETY
POLICY
4.1
Geoscience Testing Laboratory is dedicated in establishing an accident free workplace, protecting andpreserving the environment, promoting Health and safety to its members and ensuring preservation ofcompany properties.
Establishing and monitoring an effective Environment Health & Safety Management System (EHSMS) in the
laboratory based on relevant regulatory requirements and best practices. The Laboratory shall give highest
priority to its Health, Safety and Environment responsibilities by providing the necessary resources EHS
manpower staff , information, training, supervision and instruction to all the staff, visitors and the members
of the public thereby reducing work hazards, occupational illness and environmental deterioration.
The company shall exert effort to reduce the impact of all its activities to the environment, establish effective
waste management action with the main objective of protecting and preserving the environment .The
management shall be responsible for ensuring that all its employees is aware of its role in all environment
issues and attaining its targets and objectives in environmental management .
GTL is committed to implement and comply with the requirements of UAE regulation on Health, Safety, and
Environment and where practicable shall strive to exceed them by adopting international standards and best
practices. We undertake to continually review in a regular basis and improve our EHSMS with an overviewed
aim of conducting our activities in a manner to protect the health and safety of all personnel with in the
laboratory including visitors, contractors and members of the public and conservation of environment.
The company through the CEO and management team shall set and achieve our EHS objectives and targets
and be on constant monitoring of all EHS activities within the company, it branches & contractors. Top
Management shall be responsible for the overall implementation of EHSMS programs and its outcome.
APPROVED BY:
ENG. MARY JANE ALVERO AL MAHDI
CHIEF EXECUTIVE OFFICER
7/24/2019 Company Profile - RTA
10/1005.1
7/24/2019 Company Profile - RTA
11/1005.2
7/24/2019 Company Profile - RTA
12/1005.3
7/24/2019 Company Profile - RTA
13/1005.4
7/24/2019 Company Profile - RTA
14/1005.5
7/24/2019 Company Profile - RTA
15/100
5.6
7/24/2019 Company Profile - RTA
16/100
5.
7
7/24/2019 Company Profile - RTA
17/1006.1
7/24/2019 Company Profile - RTA
18/1006.2
7/24/2019 Company Profile - RTA
19/1006.3
7/24/2019 Company Profile - RTA
20/1006.4
7/24/2019 Company Profile - RTA
21/1006.5
7/24/2019 Company Profile - RTA
22/100
7.1
7/24/2019 Company Profile - RTA
23/100
7.3
7/24/2019 Company Profile - RTA
24/100
7.4
7/24/2019 Company Profile - RTA
25/100
7.5
7/24/2019 Company Profile - RTA
26/100
7.6
7/24/2019 Company Profile - RTA
27/100
7.7
7/24/2019 Company Profile - RTA
28/100
7.8
7/24/2019 Company Profile - RTA
29/100
7.9
7/24/2019 Company Profile - RTA
30/100
7.10
7/24/2019 Company Profile - RTA
31/100
7.11
7/24/2019 Company Profile - RTA
32/100
7.12
7/24/2019 Company Profile - RTA
33/100
7.13
7/24/2019 Company Profile - RTA
34/100
7.14
7/24/2019 Company Profile - RTA
35/100
7.15
7/24/2019 Company Profile - RTA
36/100
7.16
7/24/2019 Company Profile - RTA
37/100
7.17
7/24/2019 Company Profile - RTA
38/100
7.18
7/24/2019 Company Profile - RTA
39/1007.19
7/24/2019 Company Profile - RTA
40/1007.20
7/24/2019 Company Profile - RTA
41/1007.39
7/24/2019 Company Profile - RTA
42/1007.40
7/24/2019 Company Profile - RTA
43/100
Field S.No Test Description Test MethodAccreditation
Agency
1
In-situ Density by Sand
Replacement Method Using Large
Pouring Cylinder & Small Pouring
Cylinder
BS 1377 Part 9 Clause 2.2 DAC-DM
2
Dry Density Moisture Content
Relationship Using 4.5 kg Rammer
for Coarse and Medium Gravel Size
Particles
BS 1377 Part 4 Clause 3.5 &
3.6DAC-DM
3
Particle Size Distribution (Sieve
Analysis)
BS 1377 Part 2 Clause 9.2 &
9.3 DAC-DM
4 California Bearing Ratio BS 1377 Part 4 Clause 7.2.3 DAC-DM
5 Liquid Limit BS 1377 Part 2 Clause 4.3 DAC-DM
6 Plastic Limit & Plasticity Index BS 1377 Part 2 Clause 4.3 DAC-DM
7 pH Soil BS 1377 Part 3 Clause 9 DAC-DM
8Chloride Content of Soil
(Acid Soluble / Water Soluble)BS 1377 Part 3 Clause 7.3 DAC-DM
9 Sulphate Content of Soil(Acid Soluble / Water Soluble)
BS 1377 Part 3 Clause 5.2 &5.5.3
DAC-DM
10 pH of Groundwater BS 1377 Part 3 Clause 9 DAC-DM
11 Chloride Content of Ground Water BS 1377 Part 3 Clause 7.2 DAC-DM
12 Sulphate Content of Ground WaterBS 1377 Part 3 Clause 5 &
5.4DAC-DM
1Determination of Particle Size
Distribution (Wet / Dry Sieving)
BS 812 Part 103.1 Clause
7.2 & 7.3DAC-DM
2Determination of Flakiness Index of
Aggregates
BS 812 Part 105 Section
105.1
DAC-DM
3Determination of Elongation Index
of Aggregates
BS 812 Part 105 Section
105.2DAC-DM
4Determination of Shell Content in
Coarse AggregatesBS 812 Part 106 DAC-DM
5Determination of Aggregate
Crushing ValueBS 812 Part 110 DAC-DM
6Determination of Ten Percent Fines
Value
BS 812 Part 111 Test 7.1 &
7.2DAC-DM
DUBAI
LIST OF ACCREDITED TESTS
Soil
GroundWater
Aggregates
8.1
7/24/2019 Company Profile - RTA
44/100
Field S.No Test Description Test MethodAccreditation
Agency
DUBAI
LIST OF ACCREDITED TESTS
7
Determination of Soundness of
Aggregates by the Use of Sodium
Sulphate and Magnesium Sulphate
ASTM C88 DAC-DM
8
Materials Finer than 75m Sieve
(Fines Passing No. 200) in Mineral
Aggregates by Washing
ASTM C117 DAC-DM
9Specific Gravity & Water Absorption
of Coarse AggregatesASTM C127 DAC-DM
10Specific Gravity & Water Absorption
of Fine AggregatesASTM C128 DAC-DM
11Sieve Analysis of Fine and Coarse
AggregatesASTM C136 DAC-DM
12
Resistance to Degradation of small
size or large size coarse
aggregates by abrasion and impact
in Los Angeles machine
ASTM C131
ASTM C535DAC-DM
13Determination of Clay Lumps &
Friable ParticlesASTM C142 DAC-DM
14Determination of Sand Equivalent
Value
ASTM D2419 DAC-DM
15
Chloride Content of Aggregates
Using a Nitric Acid Extract for
Aggregates Containing Chloride Not
Extracted by Water
BS 812 Part 117 Appendix C DAC-DM
16Total Sulphate by Acid Extraction
MethodBS 812 Part 118 Clause 6 DAC-DM
17Organic Impurities in Fine
Aggregates for ConcreteASTM C40 DAC-DM
1Determination of Compressive
Strength of Concrete CubesBS 1881 Part 116 DAC-DM
2Measurement of Dimension of Pre-
cast Concrete Masonry UnitsBS 6073 Part 1 Appendix A DAC-DM
3
Determination of Compressive
Strength of Pre-cast Concrete
Masonry Units
BS 6073 Part 2 Appendix B DAC-DM
4Measurement of Dimension of Pre-
cast Concrete Paving BlocksBS 6717 Part 1 Annex A DAC-DM
Aggregates
Concrete
8.2
7/24/2019 Company Profile - RTA
45/100
Field S.No Test Description Test MethodAccreditation
Agency
DUBAI
LIST OF ACCREDITED TESTS
5
Determination of Compressive
Strength of Pre-cast Concrete
Paving Blocks
BS 6717 Part 1 Annex B DAC-DM
6
Electrical Indication of Concretes
Ability to Resist Chloride Ion
Penetration
ASTM C1202 DAC-DM
7
Determination of Depth of
Penetration of Water UnderPressure
BS EN12390 Part 8 DAC-DM
8Determination of Water
PermeabilityDIN 1048 DAC-DM
9Determination of Water Absorption
of Hardened ConcreteBS1881 Part 122 DAC-DM
10
Recommendations for the
Determination of the Initial Surface
Absorption of Concrete
BS 1881 Part 208 DAC-DM
11Determination of Chloride Content
in Hardened Concrete
BS 1881 Part 124 Clause
10.2DAC-DM
1 Steel Bend Tests BS EN ISO 15630-1 DAC-DM
2 Steel Rebend Tests BS 4449 DAC-DM
3 Tensile Strength TestsBS 4449 & BS EN ISO 15630-
1DAC-DM
1Biochemical Oxygen Demand
(BOD) 5 Days Incubation at 20C
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 5210 B
DAC-DM
2 Chemical Oxygen Demand (COD)
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 5220 B
DAC-DM
3 Oil & Grease
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 5520 B
DAC-DM
4 pH
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 4500H B
DAC-DM
Environm
ental
Steel
Concrete
8.3
7/24/2019 Company Profile - RTA
46/100
Field S.No Test Description Test MethodAccreditation
Agency
DUBAI
LIST OF ACCREDITED TESTS
5 Total Dissolved Solids
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 2540 C
DAC-DM
6 Total Suspended Solids
APHA-AWWA WEF 22nd Ed.
Standard Method for
Examination of Water and
Waste Water, 2540 D
DAC-DM
7 Metals (Cu, Cd, Pb, Ni, Zn, Cr, Co,Fe, Mn, Ag)
APHA-AWWA WEF 22nd Ed.
Standard Method forExamination of Water and
Waste Water, 3030, 3111
DAC-DM
1 Ground Water Level MeasurementBS 5930 Clause 23.2 & 27.5
& 47.2.7DAC-DM
2 Ground Water Sampling BS 5930 Clause 23.3 DAC-DM
3 Rock Quality Designation BS 5930 Clause 44.4.4 DAC-DM
4 Core Recovery BS 5930 Clause 44.4.4 DAC-DM
5
Code of Practice for Site
Investigation Geotechnical
Reporting
BS 5930 Section 7 DAC-DM
6 Soil samplingBS 5930 Clause 20.5 and
Clause 22DAC-DM
7 Soil DescriptionBS 5930 Section 41 & 44
Clark and WalkerDAC-DM
8 Standard Penetration Test (SPT) BS 1377 Part 9 Section 3.3 DAC-DM
1 Aerobic Plate Count USFDA BAM Chapter 3 DAC-DM
2 Enumeration of Enterobacteriaceae CCFRA 2.3.1 DAC-DM
3 Enumeration of Yeast & Moulds CCFRA 2.1.1 DAC-DM
4Enumeration of Coliforms by Colony
Count MethodCCFRA 2.2.1 DAC-DM
5 Coliforms by MPN Method CMMEF Ch 8.71, 4th Ed DAC-DM
6 E.coli by MPN Method CMMEF Ch 8.91, 4th Ed DAC-DM
7Enumeration of Coagulase Positive
StaphylococcusCCFRA 3.5.1 DAC-DM
Environmental
Food
Microbio
logy
Geotechn
icalInvestigation
8.4
7/24/2019 Company Profile - RTA
47/100
Field S.No Test Description Test MethodAccreditation
Agency
DUBAI
LIST OF ACCREDITED TESTS
8Detection of Salmonella spp;
Cultural MethodCCFRA 3.1.2 DAC-DM
9 Enumeration of Bacillus Cereus USFDA BAM Chapter 14 DAC-DM
10Enumeration of Clostridium
PerfringensCCFRA 3.6.1 DAC-DM
11 Detection of E.coli O157:H7
Reveal Microbial Screening
Test E.coli O157:H7 Test
System, Neogen Corporation
DAC-DM
12 Detection of Listeria spp.
Reveal Microbial Screening
Test Listeria Test System,
Neogen Corporation
DAC-DM
13Detection of Vibrio
parahaemolyticusCCFRA 3.8.2 DAC-DM
14 Aflatoxin
Agri-screen Aflatoxin
Screening Test, USDA-
GIPSA 2006-009, Product
No. 8010, Neogen
Corporation
DAC-DM
15 Heterotrophic Plate Count APHA 9215B, 22nd
Ed DAC-DM
16Total coliform by Membrane
Filtration MethodAPHA 9222B, 22
ndEd DAC-DM
17Escherichia coli by Membrane
Filtration Method
APHA 9222B
APHA 9222G, 22nd
EdDAC-DM
18 Faecal Streptococci APHA 9230C, 22nd
Ed DAC-DM
19Enumeration of Pseudomonas
Aerginosa by Membrane FiltrationISO 16266 DAC-DM
20 Legionella by Cultural Method BS EN ISO 11731-2 DAC-DM
21 Coliforms by MPN Method APHA 9221B, 22ndEd DAC-DM
22 Fecal Coliforms by MPN Method APHA 9221E.1,22nd
Ed DAC-DM
23 E. coli by MPN Method APHA 9221F., 22nd
Ed DAC-DM
24 Enumeration of Yeast & Mould APHA 9610D, 22nd
Ed DAC-DM
25Enumeration of Staphylococcus
aureus by Membrane Filtration
W10, National Standards
Method, Issue 3.3DAC-DM
Microb
iology
Food, Fish
Grains
Water (Domestic, Potable water, Recreational water, Non potable water, bottled water)
Water and Ice
8.5
7/24/2019 Company Profile - RTA
48/100
Field S.No Test Description Test MethodAccreditation
Agency
DUBAI
LIST OF ACCREDITED TESTS
26Enumeration and detection of
Aerobic Mesophilic BacteriaISO 21149 DAC-DM
27 Detection of Staphylococcus aureus ISO 22718 DAC-DM
28 Enumeration of Yeast & Mould ISO 16212 DAC-DM
29Detection of Pseudomonas
aeruginosaISO 22717 DAC-DM
30 Detection of E. coli ISO 21150 DAC-DM
31 Microbiological Sampling of Food MB-SOP 22 DAC-DM
32 Microbiological Sampling of WaterMB-SOP 19
MB-SOP 20DAC-DM
33Microbiological Sampling of Air/
EnvironmentMB-SOP 37 DAC-DM
34 Microbiological Swab Sampling MB-SOP 21 DAC-DM
35Sampling for Legionella bacteria in
water systemBS 7592 DAC-DM
Total Viable Count
Total Bacterial Count
Yeast & MouldMethod 800, NIOSH, 4
thEd
IESO Method 1220, 2nd Ed
DAC-DM
DAC-DM
37 Aerobic colony count USFDA BAM Chapter 3 DAC-DM
38 Total Coliforms CCRFA 2.2.1 DAC-DM
39 E.coli by MPN Method CCMEF Ch 8.91, 4th
Ed DAC-DM
40 Aerobic colony count USFDA BAM Chapter 3 DAC-DM
41 Total Colifoms CCRFA 2.2.1 DAC-DM
42 Staphylococcus aureus CCRFA 3.5.1 DAC-DM
Food, Water & Air/Environmental
Air / Environment
Surface Swab
Hand Swab
Microbiology(Sampling)
Microbiology
36
Microbiology
(Cosmetics)
8.6
7/24/2019 Company Profile - RTA
49/100
Field S.No Test Description Test MethodAccreditation
Agency
1
In-situ Density by Sand
Replacement Method Using Large
Pouring Cylinder
BS 1377 Part 9 Clause 2.2 DAC-DM
2
Methods of Test for Soil for civil
engineering purposes
Part 2: Classification Test
Determination of Moisture Content
by Oven Drying Method
BS 1377 Part 2 Clause 3.2
AMD 9027DAC-DM
1Determination of Normal Curing of
Test Specimen (20C Method)
BS 1881 Part 111
AMD 6102
AMD 9387
DAC-DM
2Determination of Density of
Hardened Concrete
BS 1881 Part 114
AMD 6098
AMD 6721
DAC-DM
3Determination of Compressive
Strength of Concrete Cubes
BS 1881 Part 116
AMD 6097
AMD 6720
DAC-DM
Concrete
LIST OF ACCREDITED TESTSAL QUOZ
Soil
8.13
7/24/2019 Company Profile - RTA
50/100
Sr. No Description of Test Test Method
Soil
1In-situ Density by Sand Replacement Method Using
Large Pouring Cylinder & Small Pouring CylinderBS 1377 Part 9
2 In-place Density Test by Sand Cone Method ASTM D 1556
3 In-situ Density Test Using Nuclear DensitometerBS 1377 Part 9
ASTM D 6938
4
Dry Density Moisture Content Relationship Using
4.5 kg Rammer for Coarse and Medium Gravel Size
Particles
BS 1377 Part 4
ASTM D 1557
AASHTO T 180
5 Particle Size Distribution / Sieve Analysis BS 1377 Part 2
6 California Bearing Ratio
BS 1377 Part 4
AASHTO T 193
ASTM D 1883
7 Liquid Limit
BS 1377 Part 2
ASTM D 4318
AASHTO T 89
8 Plastic Limit & Plasticity Index
BS 1377 Part 2
AMD 9027
ASTM D 4318
AASHTO T 90
9 In-situ CBR BS 1377 Part 9
10 Moisture Content BS 1377 Part 2ASTM D 2216
11Moisture Content by Calcium Carbide Gas Pressure
TesterASTM D 4944
12 Sieve Analysis - Hydrometer MethodBS 1377 Part 2
ASTM D 422
13 Linear Shrinkage BS 1377 Part 2
14 Soil Classification
ASTM D 2487
ASTM D 3282
AASHTO M 145
15 Shear Box Test BS 1377 Part 7
16 Soil Permeability BS 1377 Part 517 Coefficient of Uniformity (Cu) ASTM D 2487
18 Plate Load Tests
ASTM D 1194
BS 1377 Part 9
DIN 18134
19 Maximum and Minimum Density BS1377 Part 4
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
9.1
7/24/2019 Company Profile - RTA
51/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
20 Bulk Density and Dry Density BS 1377 Part 2
21 Theoretical Density (Zero Void Condition) BS 1377 Part 4
22 Particle Density BS 1377 Part 2
23 Determination of Moisture Content BS 1377 Part 2
24 Percolation Test IHTP - 02
25 Dynamic Cone Penetration Test (DCPT) ASTM D 6951
26 In-situ Density of Soil in Place (Sleeve Method) ASTM D 4564
27 Thermal Conductivity in Soil ASTM D 5334
28 Electrical Resistivity BS 1377 Part 3
29 Moisture Condition Value (MCV) BS 1377 Part 4
30
Determination of Bulkage Factor of Natural Soil
Deposits, Compaction Factor & Shrinkage Factor of
Soil
IHTP-34
31Laboratory Compaction Characterisitics of Soil Using
Standard EffortASTM D 698
AASHTO T 99
32 Triaxial Compression Test on Cohesive SoilsASTM D 2850
ASTM D 4767
Aggregates
1 Sampling of Aggregate ASTM D 75
2Particle Size Distribution
(Wet / Dry Sieving)BS 812 Part 103.1
3 Flakiness Index of Aggregates BS 812 Part 105.1
4 Elongation Index of Aggregates BS 812 Part 105.2
5 Shell Content in Coarse AggregatesBS 812 Part 106
BS EN 933 Part 7
6 Aggregate Crushing Value BS 812 Part 110
7 Ten Percent Fines Value BS 812 Part 111
8 Aggregate Impact Value BS 812 Part 112
9Soundness of Aggregates by the Use of Sodium
Sulphate and Magnesium Sulphate
ASTM C 88
BS 812 Part 121
10Materials Finer than 75m Sieve (Fines Passing No.
200) in Mineral Aggregates by WashingASTM C 117
11Specific Gravity & Water Absorption of Coarse
AggregatesASTM C 127
9.2
7/24/2019 Company Profile - RTA
52/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
12Specific Gravity & Water Absorption of Fine
AggregatesASTM C 128
13 Sieve Analysis of Fine and Coarse Aggregates ASTM C 136
14
Resistance to Degradation of Small Size or Large
Size Coarse Aggregates by Abrasion and Impact in
Los Angeles Machine
ASTM C 131
ASTM C 535
15 Clay Lumps & Friable Particles ASTM C 142
16 Specific Gravity & Absorption BS 812 Part 2
17 Particle Density of Fillers BS 812 Part 2
18 Sand Equivalent Value ASTM D 2419
19 Rock Armour Grading AnalysisCIRIA SP
CUR 154
20Unconfined Compressive Strength of Intact Rock
Core Specimens
ASTM D 2938
ASTM D 4543
21 Point Load Index TestsASTM D 5731
ISRM
22 Fully Crushed Faces of Aggregates DM 300
23 Partially Crushed Faces of Aggregates DM 301 / DMS - 8
24 Compaction Fraction IHTP-01
25 Drying Shrinkage ( Masonry ) BS 6073 Part 1
26 Drying ShrinkageBS 812 Part 120
BS EN 1367 Part 4
27 Sieve Analysis of Mineral Filler ASTM D 546
28 Bulkage Factor IHTP-34
29 Bulk Density BS 812 Part 2
30 Determination of Moisture Content BS 812 Part 109
31Weight Distribution of Quarried Stone
(Rock Grading)
CIRIA SP
CUR 154
BS EN 13383-2
32Shape Index
(Length-to-Thickness Ratio of Quarried Stone)
CIRIA SP
CUR 154
BS EN 13383-2
33 Drop Test Breakage Index
CIRIA SP
CUR 154
BS EN 13383-2
9.3
7/24/2019 Company Profile - RTA
53/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
34 Water Absorption at Atmospheric Pressure
CIRIA SP
CUR 154
BS EN 13383-2
35Density of Rocks with a Volume of at Least
50 ml.
CIRIA SP
CUR 154
BS EN 13383-2
36 Bulk Density (unit weight) and Voids in Aggregate ASTM C 29 / C29M
37 Materials Finer than 63m in Mineral Aggregates BS EN 933 Part 1
38 Los Angeles Abrasion Test BS EN 1097 Part 2
39 Particle Size Distribution of Soil ASTM D 422
40 Density of Coarse Aggregates & Water AbsorptionCIRIA SP - 1983
CUR 154 - 1991
41 Particle Size DistributionCIRIA SP
CUR 154
42 Content / Sieve Analysis of Extracted AggregatesCIRIA SP
CUR 154
43 Resistance to WearingCIRIA SP
CUR 154
44 Specific GravityCIRIA SP
CUR 154
45 Point Load IndexCIRIA SP
CUR 154
46 Unconfined Compressive StrengthCIRIA SP
CUR 154
47 Impact TestCIRIA SP
CUR 154
48 Crushing ValueCIRIA SP
CUR 154
Fresh Concrete Tests
1 Method of Sampling Fresh Concrete at Site BS 1881 Part 101
2 Slump & Temperature in Fresh Concrete BS 1881 Part 102
3 Air Content in Fresh Concrete BS 1881 Part 106
4 Density of Compacted Fresh Concrete BS 1881 Part 107
5 Bleeding of Fresh Concrete ASTM C 232
9.4
7/24/2019 Company Profile - RTA
54/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
6 Concrete Setting Time ASTM C 403
7 Yield / Cement Content of Fresh Concrete ASTM C 138/C 138M
8 Water Cement Ratio BS 1881 Part 2
9Monitoring of Temperature in Concrete Using
ThermocoupleIHTP - 08
Hardened Concrete
1 Compressive Strength of Concrete CubesBS 1881 Part 116
BS EN 12390 Part 3
2 Density of Concrete Cubes BS 1881 Part 114
3 Dimension of Pre-cast Concrete Masonry UnitsBS 6073 Part 1
BS EN 772 Part 16
4Compressive Strength of Pre-cast Concrete Masonry
Units
BS 6073 Part 2
BS EN 772 Part 1
5 Dimension of Pre-cast Concrete Paving Blocks
BS 6717 Part 1
BS EN 772 Part 16
DMS 1 Part 4 Annex A
6Compressive Strength of Pre-cast Concrete Paving
Blocks
BS 6717 Part 1
BS EN 772 Part 1
DMS 1 Part 4 Annex B
7 Electrical Indication of Concretes Ability to ResistChloride Ion Penetration
ASTM C 1202 - 97
8 Water Absorption of Hardened Concrete BS 1881 Part 122
9 Depth of Penetration of Water Under PressureBS EN 12390 Part 8
DIN 1048 Part 5
10Recommendations for the Determination of the Initial
Surface Absorption of ConcreteBS 1881 Part 208
11Method of Normal Curing of Test Specimens (20C
method)BS 1881 Part 111
12 Transverse Strength of Kerbstone BS 7263 Part 1
13 Water Absorption of Kerbstone BS 7263 Part 1
14 Compressive Strength of Concrete Cores BS 1881 Part 120
15 Compressive Strength of Concrete Cylinders ASTM C 39 / C39M
16 Flexural Strength of Concrete Beam BS 1881 Part 118
17 Tensile Splitting StrengthBS 1881 Part 117
ASTM C 496 / C 496M
9.5
7/24/2019 Company Profile - RTA
55/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
18 Modulus of Elasticity of Cylinder ASTM C 469
19 Chloride Migration Coefficient NT Build 492
20 Chloride Diffusion Coefficient NT Build 355
21Porosity of Hardened Concrete (Absorption in
Vacuum)Rilem CPC 11.3
22Compressive Strength & Water Absorption of Cover
BlockBS EN 196 / Applicable Procedure
23 Drying Shrinkage of Autoclaved Aerated Concrete BS EN 680
24 Compressive Strength of Masonry Prisms ASTM C 1314
25Compressive Strength of Concrete (using rebound
hammer)BS EN 12504 Part 2
26Pulse Velocity Through Concrete
(test for crack depth)
BS 1881 Part 203
BS EN 12504 Part 4
ASTM C 597
27Moisture Content of Autoclaved Aerated Concrete
UnitsBS EN 772-10
28 Compressive Strength of Masonry Units BS EN 772 Part 1
29 (Net / Gross) Dry Density of Masonry Units BS EN 772 Part 13
30 Dimension of Masonry UnitsBS EN 772 Part 16
ASTM C 1386
31 Drying Shrinkage of Masonry Units ASTM C 426
32 Compressive Strength of Concrete Masonry Blocks ASTM C 140
33 Density and Water Absorption of Concrete Masonry ASTM C 140
34 Bulk/Apparent Density of Masonry UnitsASTM C 140
BS EN 772 Part 4
35 Compressive Strength of AAC Blocks BS EN 772 Part 1
36 Dimension of AAC Blocks BS EN 772 Part 16
37 Compressive Strength of Grout Cube ASTM C 579
38 Physical Analysis of Cement
BS EN 196 Part 1
BS 4027
ASTM C 150
9.6
7/24/2019 Company Profile - RTA
56/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
39 Surface Texture of Interlocking Concrete Blocks IHTP-27
40 Tensile Splitting Strength of Paving BlocksBS 6717 Annex E
BS EN 1338
41 Flexural Strength on Concrete Pavers ASTM C 140 / AS/NZS 4456.5
42Transverse Strength of Unreinforced Concrete and
Clayware CoversBS 2484 Appendix B
43Water Absorption of Autoclaved Aerated Concrete
Masonry UnitsBS EN 772 Part 11
44Compressive Strength of Precast Autoclaved
Aerated Concrete ( AAC ) Wall Construction Units
BS EN 772 Part 11
ASTM C 1386
45 Compressive Strength ( Structural Clay Tile ) ASTM C 67
46 Density, Absorption and Voids in Hardened Concrete ASTM C 642
47 Flexural Tensile Strength BS EN 14651
48 Measurement of Abrasion Resistance BS EN 1338, Annex G
49 Skid ResistanceBS EN 1338, Annex I, BS EN 1339,
Annex I
50 Slip Resistance/ Static Coefficient of Friction (Tile) ASTM C1028
51 Solar Reflective Index ASTM E 1980
52 Thermal Conductivity in BlockASTM C 518
BS EN ISO 6946
Cement
1 ConsistencyBSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
2 Setting TimeBSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
3 SoundnessBSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
4 Fineness (Specific Surface Blaine)BSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
5 Flexural StrengthBSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
6 Compressive StrengthBSEN 196 Part 1 / BS 12 /
BS 4027 / ASTM C 150
7 Heat of Hydration BSEN 196 Part 8
9.7
7/24/2019 Company Profile - RTA
57/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
GGBS & Fly Ash
1 Setting TimeBS 6699 / BSEN 196
ASTM C 989
2 Fineness 45micronsBS 6699 / BSEN 196
ASTM C 989
3 SoundnessBS 6699 / BSEN 196
ASTM C 989
4 Slag Activity IndexBS 6699 / BSEN 196
ASTM C 989
5 Compressive Strength BS 6699 / BSEN 196ASTM C 989
Micro Silica
1 Fineness ASTM C 430
2 Compressive Strength ASTM C 109 / C 109M
3 Pozzolonic Index Activity ASTM C 1240
Asphalt
1 Sampling of Bituminous Paving Mixtures ASTM D 979
2 Specimen Thickness / Diameter of CompactedBituminous Paving Mixture
ASTM D 3549ASTM D 2726
3Bulk Specific Gravity of Compacted Bituminous
Mixtures
ASTM D 2726
ASTM D 1188
4Percentage Voidage in Compacted Bituminous
Paving MixtureDMS 9
5Theoretical Maximum Specific Gravity & Density of
Bituminous Paving MixtureASTM D 2041
6 Stability & Flow of Bituminous Mixtures (Marshall)ASTM D 6926
ASTM D 6927
7Stability of Bituminous Mixtures at Different
Immersion Time
ASTM D 6926
ASTM D 69278 Loss of Stability of Compacted Bituminous Mixtures DMS 10
9Coating & Stripping Test of Bitumen Aggregate
MixtureASTM D 1664
10 Binder Content (asphalt content) by Ignition Method ASTM D 6307
9.8
7/24/2019 Company Profile - RTA
58/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
11 Marshall Preparation ASTM D 6926
12 Sieve Analysis of Extracted Aggregate ASTM D 5444
13 Rate of Application of Bituminous Distributors ASTM D 2995
Steel
1 Bend Test BS 4449
2 Rebend Test BS 4449
3 Tensile Strength BS 4449 / BS EN 10002 Part 1
4 Tensile Strength Structural Steel BS EN 10002 Part 1 / BS EN ISO 6892-1
5 Coating Thickness ASTM A 775 / A 775M
6 Coating Flexibility ASTM A 775 / A 775M
7 Coating Continuity (holiday test) ASTM A 775 / A 775M
8 Galvanizing Coating Thickness on Steel ArticleBS EN ISO 1461
ASTM G 12
9 Tensile Test on Anchor Bolts BS 4360
10 Tensile Test on Tie Rods BS EN 10002 Part 1 / BS EN ISO 6892-1
11 Tensile Test on Couplers BS EN 10002 Part 1 / BS EN ISO 6892-1
12 Load Test on Manhole Cover BS EN 124
13 Tensile Test on Welded Steel Mesh BS 4483
14 Tensile Test as Welded Steel Bar BS EN 10002 Part 1 / BS EN ISO 6892-1
15 Tensile Test on Steel Pipe ASTM A 370
9.9
7/24/2019 Company Profile - RTA
59/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
16 Coating Thickness on Manhole Cover BS 3900
17Half Cell Potential of Uncoated Reinforcement Steel
(Steel Corrosion Tests)ASTMC 876
18 Adhesion Strength ASTM D 4541
19 Pull-off Strength After Salt Spray ASTM D 4541
20 Pull-out Strength BS 1881 Part 207
21 Pull-off Tests on Paints ASTM D 4541
22 Pull-off Tests on Plaster BS 1881 Part 207
23 Dry Film Thickness (DFT) BS 3900 Part C5
24
Cover Meter Survey
(To determine the cover, thickness and location of
bars)
BS 1881 Part 204
25 Test for Crack Width CIRIA C 519
26 Load Test on Scaffolding IHTP - 15
27 Load Test on Guard Rail Beam IHTP - 36
28 Thickness Test on Warning Tape IHTP - 29
29 Barcoal Hardness ASTM D 2583
30 Durometer Hardness ( Shore A ) ASTM D 2240
31 Wet Film Coating Thickness ASTM D 4414
32 Bend test ( Wire Mesh ) BS 4483
33 Mass / Meter ( Wire Mesh ) BS 4483
34 Pull-off Strength ( Tile ) BS 1881 Part 207
9.10
7/24/2019 Company Profile - RTA
60/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
35 Breaking Load ( Post Tension Strand / Wire ) ASTM A 416 / A416M
36 Ultrasonic Pulse Velocity BS EN 12504 Part 4
Cementitious Tile Adhesive
1 Water Absorption ASTM C 413
2 Density ASTM D 792
Grout Test (Post Tension)
1Fluidity & Temperature, Bleeding,Volume Change, Wet Density &
Compressive Strength
Project Specification /
BS EN 445
Mortar
1 Flow ASTM C 185
2 Air Content ASTM C 185
3 Compressive Strength ASTM C 109 / C 109M
Epoxy Glue
1 Pot Life of the Mixed Bonding Agent FIP 9
2 Open Time of Bonding Agent FIP 9
3 Thixotropy (Sag Flow) FIP 9
4 Angle of Internal Friction (Squeezability) FIP 9
5 Compressive StrengthFIP 9
ASTM C 109
6 Tensile Bending Strength FIP 9
7 Shear Test FIP 9
Ceramic Tiles
1 Modulus of Rupture BSEN 10545 Part 4
2 Water Absorption BSEN 10545 Part 3
9.11
7/24/2019 Company Profile - RTA
61/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
3 Density BSEN 10545 Part 3
4 Chemical ResistanceBS EN 100 Cls. 2
BS EN ISO 10545-13
5 MOH's Scratch Hardness BS EN 101
6 Thickness Measurement
Marble & Granites / Dimension Stones
1 Modulus of Rupture ASTM C99 / C 99M
2 Water Absorption ASTM C97 / C 97M
3 Bulk Specific Gravity ASTM C 97/C 97M
4 Flexural Strength ASTM C 880
5 Compressive Strength ASTM C170/C 170M
Joint Board Filler
1 Extrusion, Recovery, Density & Water Absorption ASTM D 1751ASTM D 545
Geotextile and Other Related Fabrics
1Static Puncture Strength using a 50 mm Probe
(CBR)
ASTM D 6241
ISO 12236
2 Index Puncture ResistanceASTM D 4833
ASTM E 154
3 Wide - Width Tensile Strength (Strip Method) ASTM D 4595
4 Mass Per Unit AreaASTM D 5261
DIN EN 1849-1
5 Grab Strength ASTM D 5034ASTM D 4632
6 Trapezoidal Tear StrengthASTM D 5587
ASTM D 4533
7 Trapezoidal Tear Strength (Non-woven Geotextile) ASTM D 5733
8 Nominal Thickness Measurement
ASTM D 5199
ASTM D 5261
BS EN ISO 9863 Part 1
9 Geosynthetics Wide Width Tensile Test BS EN ISO 10319
9.12
7/24/2019 Company Profile - RTA
62/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESPHYSICAL / MECHANICAL
10 UV Resistance ASTM D 4355
Waterproofing Membrane
1 Tensile Properties ASTM D 412
2 Mass Per Unit Area DIN EN 1849-1
3 Tear ResistanceASTM D 5147
BS EN 12310-1
4 Water Absorption ASTM D 570
Plastic and Thin Plastic Sheets
1 Tensile Properties ASTM D 638
2 Flexural Properties ASTM D 790
3 Compressive Properties ASTM D 695
4 Tear Resistance ASTM D 1004
5 Water Absorption ASTM D 570
Paper / Paper Board
1 Tensile and ElongationASTM D 828
BS EN 12311-1
2 Thickness IHTP - 29
Thermoplastic Road Marking Materials
1
Grading of Thermoplastic (Binder Content,
Percentage of Aggregate, Pigment, Extenders and
Glass Beads, Total Mass of Glass Beads)
BS 3262 Part 1
2 Relative Density BS 3262 Part 3
3 Grading of Glass Beads BS 6088
Warning Tape
1 Tensile Properties ASTM D 882
2 Width Measurement ASTM D 5750 / D 5750 M
3 Physical Dimension ASTM D 5947
9.13
7/24/2019 Company Profile - RTA
63/100
Sr. No Description of Test Test Method
1 Water Soluble Chloride Content in Soil BS 1377 Part 3
2 Acid Soluble Chloride Content in Soil BS 1377 Part 3
3 Water Soluble Sulphate Content in Soil BS 1377 Part 3
4 Acid Soluble Sulphate Content in Soil BS 1377 Part 3
5 pH of Soil BS 1377 Part 3
6 Carbonate Content in Soil BS 1377 Part 3
7 Organic Matter Content in Soil BS 1377 Part 3
8 Electrical Conductivity APHA - AWWA 2510 A
9 Gypsum Content BS 1377 Part 3
10 Sodium Adsorption Ratio (SAR) IHTP - 19
11 Water Soluble Salts IHTP - 39
12 Acid Soluble Material BS 812 Part 119
13 Chemical Analysis of Agricultural / Sweet Soil BS / ASTM / APHA - AWWA
14 API Gravity ASTM D 1298
1 Chloride Content of Ground Water BS 1377 Part 3
2 Sulphate Content of Ground Water BS 1377 Part 3
3 pH of Groundwater BS 1377 Part 3
1
Chloride Content of Aggregates Using a Nitric Acid
Extract for Aggregates Containing Chloride Not
Extracted by Water
BS 812 Part 117
2 Water Soluble Chloride Content in AggregatesBS 812 Part 117
BS EN 1744 Part 1
3 Total Sulphate by Acid Extraction MethodBS 812 Part 118
BS EN 1744 Part 1
4 Water Soluble Sulphate Content in AggregatesBS EN 1744 Part 1
BS 812 Part 118
5 Organic Impurities in Fine Aggregates for Concrete ASTM C 40
LIST OF TESTING SERVICESCHEMICAL
CHEMICAL-MATERIAL
B. Ground Water
A. Soil
C. Aggregates
9.14
7/24/2019 Company Profile - RTA
64/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
6 Light Weight Particles in Aggregates ASTM C 123
7Potential Alkali Reactivity of Aggregates- Chemical
MethodASTM C 289
8 Alkali Content in Aggregates
BS EN 1744 Part 1
BS 8500 Part 2
AAS (for Concrete)
9 Methylene Blue Adsorption Ciria SP 83 A.2 10.5
1 Chloride Content in Concrete BS 1881 Part 124
2 Sulphate Content in ConcreteBS 1881 Part 124 :1988 Cls. 10.3
DM Addendum 06
3 Alkali Content in Concrete BS 1881 Part 124
4 Water Soluble Chloride in Concrete / Mortar ASTM C 1218
5 Determination of Cement Content ASTM D 806
6Depth of Carbonation for Freshly Fractured Surface
in ConcreteIHTP 32
1 Concrete Water Suitability Test BS 3148 / BS EN 1008
2 Total Dissolved Solids BS 1377 Part 3
3 pH & Electrical Conductivity ASTM D 1293
4 Chloride Content ASTM D 512
5 Sulphate Content ASTM D 516
6 Total Alkalinity, Carbonate, Bicarbonate ASTM D 513
1 pH Value ASTM D 1293
2 Chloride Content IHTP - 28
3 Total Solids ASTM C 494
4 Specific Gravity APHA AWWA 2710 F
5 Alkali Content in Admixture BS EN 480 Part 12
F. Admixture
D. Concrete
E. Water Concrete
9.15
7/24/2019 Company Profile - RTA
65/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
1
Chemical Analysis including Carbon, Manganese,
Sulphur, Molybdenum, Copper, Vanadium, Silicon,
Phosporus, Chromium, Nickel, Niobium, Nitrogen,
Iron and Carbon Equivalent Value (CEV)
IHTP 21
(Optical Emission Spectrometer)
2 Determination of Coating Mass ASTM A 90
3Chemical Analysis of Stainless Steel
(SS316, SS316L)ASTM A 240
4 Chemical Analysis of Aluminum Alloys ICP OES / ASTM E 34
5 Chemical Analysis of Copper Alloys / Bronze ICP OES / ASTM B 584
1Chemical Analysis of Penetration Grade Asphalt
(Bitumen 60-70, Bitumen 40-50)
ASTM D 946
AASHTO M 20
2
Chemical Analysis of Cut Back Asphalt - Medium /
Rapid Curing Asphalt
(MC-70,MC-30,RC-30,etc)
ASTM D 2027
AASHTO M82
3Chemical Analysis of Emulsified Asphalt
(SS-1h)
ASTM D 977
AASHTO M 140
4Specific Gravity @ 60/60F
(Hydrometer Method)
ASTM D 1298
IP 60
5Density / Specific Gravity of Semi-Solid Bituminous
Material (Pycnometer Method)ASTM D 70
6 Penetration (25C, 5s, 100g) ASTM D 5
7 Flashpoint (Cleveland Open Cup) ASTM D 92
8 Flashpoint (Close Cup) ASTM D 93
9Ductility at 25 C, 5cm/min
Ductility of Residue at 25C, 5cm/minASTM D 113
10 Solubility in Trichloroethylene ASTM D 2042
11 Thin Film Oven Test Loss on Heating ASTM D 6
12 Penetration of Residue as % of OriginalASTM D 5
BS 2000 Part 50
13 Kinematic Viscosity of Asphalt ASTM D 2170
14
Kinematic Viscosity of Transparent and Opaque
Liquid ASTM D 445
H. Asphalt Products
G. Steel Products
9.16
7/24/2019 Company Profile - RTA
66/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
15
Distillation 225C, 260C, 316C
(% of Total Distillation to 360C)
Residue from Distillation to 360C
ASTM D 402
16 Water Content (%vol) ASTM D 95
17 Saybolt Furol Viscosity @ 25C (77F) ASTM D 88
18 Storage Stability ASTM D 6930
19 Softening Point (Ring and Ball)
ASTM D 36
BS EN 1427
BS 2000
20 Mixing and Compacting Temperature ASTM D 2493
21 Volat ile content (coat ings / bitumen emulsion) ASTM D 2939
1 Chemical Analysis of OPCBS EN 197 Part 1
ASTM C 150
2 Chemical Analysis of SRCBS 4027
ASTM C 150
3 Chemical Analysis of MSRC ASTM C 150
4 Chemical Analysis of GGBS BS 6699
5 Chemical Analysis of Fly Ash ASTM C 618
6 Silicon Dioxide, as SiO2
7 Insoluble Residue, (IR)
8 Chloride, as Cl-
9 Sulphate, as SO4
10 Loss on Ignition, (LOI)
11 Calcium Oxide, as CaO
12 Magnesium Oxide, as MgO
13 Ferric Oxide, as Fe2O3
14 Aluminum Oxide, as Al2O3
15 Tricalcium Aluminate, (C3A)
16 Sodium Oxide, as Na2O
BS EN 196 Part 2
ASTM C 114
I. Cement
9.17
7/24/2019 Company Profile - RTA
67/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
17 Potassium Oxide as K2O
18 Moisture Content @ 105C
19 Manganese Oxide, as Mn2O3
20 Total Alkal i
21 Chemical Moduli
1 Chemical Analysis of Microsilica ASTM C 1240
2 Chemical Analysis of Limestone ASTM C 141
3 Chemical Analysis of Silica Sand ASTM C 114
4 Silicon Dioxide ASTM C 114
5 Loss on Ignition ASTM C 311
6 Moisture Content ASTM C 311
7 Bulk Density BS 812 Part 2
1 Specific Gravity @ 60/60F (Hydrometer Method)ASTM D 1298
IP 60
2 Water Content (% vol)
ASTM D 95
IP 74
ASTM E 203
3 Sulphur Content (% wt) ASTM D 129
4Kinematic Viscosity of Transparent and Opaque
LiquidASTM D 445
5 Flashpoint (Cleveland Open Cup) ASTM D 92
6 Wear Metals APHA AWWA 3120 B / ICP - OES
7 Strong Acid Number ASTM D 974
1 Loss on Ignition / Glass Content ASTM D 2584
K. Petroleum Products (Diesel, Engine Oil, Lube Oil, etc.)
L. Glass Reinforced Plastics (GRP)
J. Siliceous Materials
BS EN 196 Part 2
ASTM C 114
9.18
7/24/2019 Company Profile - RTA
68/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
2 Acetone Sensitivity ASTM D 543
3 Chemical Resistance of GRP ASTM D 543
4Suitability of GRP in Contact with Water for Human
ConsumptionBS 6920
1 Chemical Resistance of Tiles BS EN ISO 1054513
2 Stain Resistance of Tiles BS EN ISO 1054514
1 Volume Solids / Non-Volatile Matter ASTM D 2697
2 Density / Specific Gravity ASTM D 1475
1 Bitumen Content ASTM D 545
2 Resistance to Boiling HCl ASTM D 545
1 Softening PointASTM D 36
BS 2000 58
2 Binder Content BS 3262 Part 1
Sr. No Description of Test Test Method
Chemical Analysis of :
Waste Water, Waste Chemical
Waste Sludge, Contaminated Soil
Waste Solid, Dewatering Water
Waste Oil, Treated Water
2 Chemical Analysis of Drinking / Potable Water
APHA AWWA
(as per Gulf Standard (GSO) / World
Health Organization (WHO)
Requirements)
3 Chemical Analysis of Swimming Pool WaterAPHA AWWA
(as per DM Guideline No. 69)
4 Chemical Analysis of Irrigation Water APHA AWWA
5 Chemical Analysis of Marine / Creek Water APHA AWWA
6 Chemical Analysis of Ground Water APHA AWWA
7Chemical Analysis of Water (Domestic / Chiller /
Cooling Tower / Boiler Feed / Grey)APHA AWWA
8 pH APHA AWWA 4500 H+
O. Joint Filler Board
M. Ceramic Tiles
CHEMICAL-ENVIRONMENTAL
P. Road Marking Materials
N. Paint and Sealants
1APHA AWWA (as per EPSS
Requirements)
9.19
7/24/2019 Company Profile - RTA
69/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
9 Electrical Conductivity APHA AWWA 2510 A
10 Total Dissolved Solids APHA AWWA 2540 C
11 Total Suspended Solids APHA AWWA 2540 D
12 Total Solids APHA AWWA 2540 B
13 Chemical Oxygen Demand (COD) APHA AWWA 5220 B, 5220 C, 5220 D
14Biochemical Oxygen Demand (BOD) at 5 days
incubation @ 20CAPHA AWWA 5210 B
15 Oil & Grease APHA AWWA 5520 B, 5520 C, 5520 D
16 Chloride as Cl-
APHA AWWA 4500 Cl-
17 Hydrocarbons APHA AWWA 5520 F
18 Sulphate as SO4 APHA AWWA 4500
19Calcium Hardness, Magnesium Hardness, Total
HardnessTitremetric / APHA AWWA 2340 B
20 Carbonate, Bicarbonate, Total Alkalinity APHA AWWA 2320
21 Salinity APHA AWWA 2520 B
22 Saturation Index WI 05 : 2009 (Langelier Index)
23 Water / Moisture Content KF Titrator / ASTM E 203
24 Specific Gravity of Waste Sludge APHA AWWA 2710 F
25 Total Solids @ 105 C APHA - AWWA 2540 G
26 Fixed Solids APHA - AWWA 2540 G
27 Volatile Solids APHA - AWWA 2540 G
28 Moisture Content (Gravimetric) ASTM D 2216-05
Waste Sludge and Contaminated Soil Analysis
9.20
7/24/2019 Company Profile - RTA
70/100
7/24/2019 Company Profile - RTA
71/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
51 Free Chlorine (Cl2) DPD Method
52 Total Chlorine (Cl2) DPD Method
53 Color (True and Apparent) Pt- Co Standard Method
54 Turbidity Absorptometric Method
55 Cyanide (CN-) Pyridine - Pyrazalone Method
56 Cyanuric Acid Turbidimetric Method
57 Flouride (F-) SPADNS Method
58 Iodine (I2) DPD Method
59 Total Iron (Fe) Ferrover Method
60Chromium Species
(Cr6+, CrO42-, Cr2O72-, Na2CrO4 )1,5-diphenylcarbohydrazine Method
61Molybdenum Species
(Mo6+,MoO42-, Na2M6O4)Mercaptoacetic Acid Method
62 Nitrate Species (NO3-, NO3
--N, ) Cadmium Reduction Method
63 Nitrite Species (NO2-, NO2
--N, ) Ferrous Sulphate Method
64 Total Kjedahl Nitrogen Nessler Method
65 Ammonia Species (NH3, NH4+, NH3-N) Salicylate Method
66 Dissolved Oxygen HRDO Method
67 Organophosphonates Ascorbic Acid Method
68 Phosphorus Species (P, P2O5, PO43-
) Ascorbic Acid Method
69 Total Phosphorus (P)Acid Persulfate Digestion / Ascorbic Acid
Method
70 Silica Species (Si, SiO2) Silicomolybdate Method
71 Sulfide (S2-
) Methylene Blue Method
9.22
7/24/2019 Company Profile - RTA
72/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
72 Sulfate (SO42-
) Sulfaver 4 Method
73 Surfactants - Anionic (Detergents) Crystal Violet Method
74 Total Petroleum Hydrocarbon Immunoassay Method
75 Total Kjeldahl Nitrogen Nessler Method
76 Total NitrogenNessler / Cadmium Reduction / Ferrous
Sulphate Method
77 Total Organic Carbon (TOC) Persulphate (Photometric)
78 Phenols Palintest
79
Metal Analysis :Aluminum (Al), Magnesium (Mg), Antimony (Sb),
Arsenic (As), Barium (Ba), Beryllium (Be), Bismuth
(Bi), Boron (B), Cadmium (Cd), Calcium (Ca),
Chromium(Cr), Cobalt(Co), Copper(Cu), Gallium
(Ga), Iron(Fe), Lead (Pb), Lithium(Li), Manganesse
(Mn)
APHA AWWA 3111
Atomic Absorption Spectrophotometer
(AAS)
APHA-AWWA 3120B
Inductively Coupled Plasma-Optical
Emission Spectrometer (ICP-OES)
80
Soil:Volatile Organic Compounds (VOC)
BTEX Components (Benzene, Toluene,
Ethylbenzene, Xylene), T - Butylbenzene, Styrene,
Chlorobenzene, n-propylbenzene,
1,3,5 Trimethylbenzene, Isopropylbenzene (cumene)
USEPA 5035:5021 / 8260 B (GC/MS)
81
Water:Volatile Organic Compounds (VOC)
BTEX Components (Benzene, Toluene,
Ethylbenzene, Xylene), T - Butylbenzene, Styrene,
Chlorobenzene, n-propylbenzene,1,3,5 Trimethylbenzene, Isopropylbenzene (cumene)
USEPA 5030 B / 8260 B (GC/MS)
82 Volatile Aromatic Compounds (VAH) USEPA 5035/5242 (GC/MS)
83 Semi-volatile Organic Compounds (SVOC) USEPA 8270 D (GC/MS)
84 Polynuclear Aromatic Hydrocarbon USEPA 8270 D (GC/MS)
Suitability of Non-metallic Material in Contact with
Water for Human Consumption (Ambient and High
Temperature Test)
Odour and Flavour
Color
Turbidity
Dissolved Oxygen
Metals AnalysisIn-situ Water Quality Monitoring
pH
Conductivity
Total Dissolved Solids
Turbidity
Dissolved Oxygen
Salinity
Redox Potential
Temperature
Depth
Secchi Disk (Depth)
85
Direct Instrumental Method of Analysis86
BS 6920
9.23
7/24/2019 Company Profile - RTA
73/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
Air Quality Monitoring (Indoor) :
Temperature
Relative Humidity
Wet Temperature
Black Globe Temperature
Air Velocity
Carbon Dioxide (CO2)
Ozone (O3)
Carbon Monoxide (CO)
Air Quality Monitoring (Indoor) - Wireless
Temperature
Relative Humidity
Formaldehyde
Total Volatile Organic Compounds (TVOC)
Carbon Monoxide (CO)
Carbon Dioxide (CO2)
Nitrogen Dioxide (NO2)
Sulfur Dioxide (SO2)
Ammonia (NH3)
Ozone (O3)
Air Quality Monitoring (Ambient) :
Meteorological Data
Nitrogen Dioxide (NO2)
Oxides of Nitrogen (NOx)
Ozone (O3)
Carbon Monoxide (CO)
Sulfur Dioxide (SO2)
Hydrogen Sulfide (H2S)
Volatile Organic Compounds (Non-methane)
Carbon Dioxide (CO2)
Particulate Matter (PM10) / (PM2.5)
Air Quality Monitoring (Ambient) :
Meteorological Data
Nitrogen Oxide (NO)
Nitrogen Dioxide (NO2)
Oxides of Nitrogen (NOx)
Ozone (O3)
Carbon Monoxide (CO)
Sulfur Dioxide (SO2)
Hydrogen Sulfide (H2S)
Particulate Matter (PM10) / (PM2.5)
Hydrocarbons-BTEX
-Methane / Non-Methane
Direct Instrumental Method of Analysis
(Flame Ionization Detector-FID)
Direct Instrumental Method of Analysis
88
87
Direct Instrumental Method of Analysis
Direct Instrumental Method of Analysis89
90
40 CFR 2011
Part 50
9.24
7/24/2019 Company Profile - RTA
74/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESCHEMICAL
Stack / Flue Gas Monitoring
Carbon Monoxide low / high (CO)
Carbon Dioxide (CO2)
Oxygen (O2)
Nitrogen Monoxide (NO)
Nitrogen Dioxide (NO2)
Sulfur Dioxide (SO2)
Hydrogen Sulfide (H2S)
Hydrocarbons
Stack Gas Monitoring
(Isokinetic Sampling)
-Stack Velocity
-Stack Temperature
-Moisture USEPA Method 4
-Particulate Matter (Total, PM10) USEPA Method 5 / 201
-O2
-CO2
-NOx USEPA Method 7
-SO2 USEPA Method 6
Dust Monitoring
Particulate Matter (1.0,2.5,7.0,10.0)
Total Suspended Particulate
94
Ambient Air Quality
Total Suspended Particulate
PM10
USEPA 40 CFR 2011 Volume 2 Part 50
Appendix B
95Indoor Air Quality
Total Volatile Organic CompoundsDirect Instrumental Method of Analysis
96 Air Velocity Direct Instrumental Method of Analysis
97 Noise Monitoring Direct Instrumental Method of Analysis
98 Heat Stress Monitoring Direct Instrumental Method of Analysis
99 Illuminance BS 667
Sr. No Description of Test Test Method
1Milk Chocolates (Fructose, Glucose, Maltose,
Sucrose, and Lactose)AOAC 980.13
Separation of Sugars In Honey
Separation of Sugars In All Types of Juices2 AOAC 977.20
Carbohydrates Analysis
93 Direct Instrumental Method of Analysis
Direct Instrumental Method of Analysis91
CHEMICAL-FOOD
92
USEPA Method 3
USEPA Method 1 & 2
9.25
7/24/2019 Company Profile - RTA
75/100
Sr. No Description of Test Test Method
1 HPC by Colony Count APHA 9215 B
2 HPC by Membrane Filtration APHA 9215 D
3 APC by Colony Count CCFRA 1.1.4
4 Coliforms by Membrane Filtration APHA 9222 B
5 Coliforms by MPN APHA 9221 B
6 Fecal Coliforms by Membrane APHA 9221 B
7 Fecal Coliforms by MPN APHA 9221 E
8 E. Coli by Membrane Filtration APHA 9222 B
9 E. Coli by MPN APHA 9221 F
10 Pseudomonas Aeruginosa NSM W6
11 Fecal Streptococcus APHA 9230 C
12 Yeast and Moulds APHA 9610 D & E
13 Legionella ISO 11731-2
14 Salmonella CCFRA 3.1.2
15 Staphylococcus Aureus NSM W10
16 Clostridium Perfringens NSM W5
1 Aerobic Plate Count BAM Chapter 3
2 Coliforms by Colony Count CCFRA 2.2.1
3 Coliforms by MPN CMMEF 8.71
4 Fecal Coliforms by MPN CMMEF 8.81
5 E. Coli by MPN CMMEF 8.91
6 Enumeration of Enterobacteriaceae CCFRA 2.3.1
7 Staphylococcus Aureus CCFRA 3.5.1
8 Bacillus Cereus BAM Chapter 14
9 Clostridium Perfringens CCFRA 3.6.1
10 Yeast and Moulds CCFRA 2.1.1
Water
Food
LIST OF TESTING SERVICESMICROBIOLOGY
9.26
7/24/2019 Company Profile - RTA
76/100
Sr. No Description of Test Test Method
LIST OF TESTING SERVICESMICROBIOLOGY
11 Salmonella CCFRA 3.1.2
12 E. Coli O157 : H7 AOAC 2000.14
13 Listeria spp. Reveal test kit, Neogen Corporation
14 Vibrio Parahaemolyticus CCFRA 3.8.2
15 Osmophillic microorganisms CCFRA 2.2.1
16 Aflatoxin USDA - GIPSA 2006-009
17 Histamine ALERT, Neogen
1 Total Bacterial Count (Swab) BAM Chapter 3
2 Total Coliforms (Swab) CCFRA 2.2.1
3 Staphylococcus Aureus (Swab) CCFRA 3.5.1
4 Listeria spp. (Swab) Reveal test kit, Neogen Corporation
5 Salmonella (Swab) CCFRA 3.1.2
6 Total Bacterial Count / Air NMAM 800
7 Total Mould Count / Air IESO 1220
8 Sulfate Reducing Bacteria (SRB) ASTM D 4412
Environmental
9.27
7/24/2019 Company Profile - RTA
77/100
Sr. No Description of Test Test Method
1Ground Water Level Monitoring and Sampling
Using Peizometers
BS 5930 Cls 23.2, Cls 27.5 &
Cls. 47.2.7
2Disturbed Bulk Soil Sampling Using Percussion
Drilling by Bailer / AugerBS 5930 Cls. 23.3
3Rock Sampling Using HQ, HWF, PWF
Techniques with Rotary DrillingBS 5930 Cls. 22
4Falling Head / Rising Head / Constant Head
Permeability TestBS 1377
5 Packer Test (Permeability in Rock) BS 5930
6CPT / CPTU Test Using Peizometer /
Dissipotion Test
BS 5930
BS 1377
7 Pressure Meter Test ASTM D 4719
8 Sampling Disturbed and Undisturbed Samples
a. Shell by tube in cohesive soil
b. SPT in soil
c. Core in rock
d. Bulk soil sampling
9Pile Integrity Test (PIT) low strain integrity
testing of cast-in-situ pilesASTM D 5882
LIST OF TESTING SERVICESGEOTECHNICAL
9.28
7/24/2019 Company Profile - RTA
78/100
Sr.
No.
Name of Equipment Asset No. Manufacturer
1 1 Lt. Compacting Mould S-1LTCM 09,11,14,15 Unit test/ ELE
2 Aggregate Crushing Value Equipment A-CV (02-04)Controls / Matest /
Aimil
3 Aggregate Impact Value A IM 01 ELE
4 Air Entraintment Meter C-AEM (02,06,07)ELE / FORNEY /
Gilson Company
5 Annular Surcharge Weight
S-ASW
01,06,20,39,43,55,56,59,64
65,67~69,74,79,81,83~90
Unit Test/
Controls/ ELE
6Apparatus for Dimensional Tolerances of
Intact Rock Core SpecimensC-UCT 01 Local
7Apparatus for Initial Surface Absorption
Tests
C-ISAT 01,02 Controls
8 Asphalt Content Tester AS-ACT (01 02)Barnsted
International
9 Barcol Hardness Tester BC (01-02)Barber Colman
Company
10 Base Plate (CBR) S-BP 12,19,21,23~29 Local
11Blaine Permeability
(Cement Fineness Manometer)C-BL 01 Humboldt
12 Bleeding Container C-BC (01,03~05) Q.S.; Local
13 Calcium Carbide Gas Pressure Tester S-GPT 02 Impact
14 Calibration Container S-CC (01~03,06~09) Unit Test; ELE
15 Casagrande Apparatus S-CA 02 Controls
16 CBR Compacting Mould - ASTMA- CBR
02~08;11,13~15,17~18,20
Unit Test / ELE
17CBR Compacting Mould - BS
(complete set)
S-CBR
20,31,33,45,70~74,77~80,82
88,90~93,95,96,98~102
105~108,110~ 116
Unit Test/ ELE/
Controls
18 CBR Soaking Tank CBR-TK (01-05) Local
19 Cement Compression Machine C-CTM 01 Technotest
20Coating Continuity Tester
(pin hole / holiday detector)C-PHD 01 Elcometer
21 Coating Thickness Gauge C-CTG 01 Elcometer
22 Compacting Bar C CB (06-10) ELE / Control
23 Compaction Fraction Mould + Rammer
A-CFM 01 /
A- CFR 01
AIN-CFM 01
Local
24 Compaction Rammer ( 4.5 kg ) S-CR 27~28,30 Unit test / ELE
25 Compaction Hammer AS-CH 01 ELE
26 Compression Machine C-CM (03-15) ELE / Unit test
27 Compressometer C-CEM 01 Humboltd
28 Concrete Beam Mould C-CBM (01-06) ELE
29 Concrete Crack Microscope C-CMI (02,03) Elcometer
30 Concrete Cube Mould 100 mm C-CMO (13-15) ELE
31 Concrete Cube Mould 150 mm C-CCM 01~80, 81~130 ELE
32 Concrete Mixer (2L,3L,5L,10L,85L) C-HM 01~04Hobolt, Kitchen
Aid, ELE, Makita
33 Concrete Penetrometer C-FCP 01 Technotest
LIST OF MAJOR EQUIPMENTS - MATERIA
10.1
7/24/2019 Company Profile - RTA
79/100
Sr.
No.
Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - MATERIA
34 Cone Penetrometer S-CP 02 ELE
35 Core Barrel
C-COR
01~67,69,70,71,72,73,74,75
77~82,84~87,92
Hydrostress /
Hilti / Tyrolit /
Diamond Tools
36 Core Cutting Machine C-CRM (01-06,09,10)Hydrostress / Hilti /
Tyrolit
37 Core Cutting Table C-CCT 01,02 Hydrostress / Local
38 Coring Machine AIN-CRM 01 Shibuya
39 Crack Detection Microscope C-CKM 01 ELE
40 Crackmeter C-CMA (02-10) Encardio Rite
41 Concrete Cylinder Mould C-CYM (01-24) ELE
42 Cylindrical Metal Plunger S-CMP (01-04)AS-CMP 01
ELE / Local
43 Daniels Gauge C-DGA (02-03) Local Made
44 Data Logger + 2 expansion modules C-DL (01,02,06,09) DataTaker
45 Dead Weight - 1 kg GS 14 DataTaker
46 Dead Weight - 10 kg GS (02, 11, 12) Danway / Endel
47 Dead Weight - 20 kg GS (01, 08 10,13)Danway / Endel /
Kern
48 Dead Weight - 5 kg GS 07 Kern
49 Density Cone Apparatus (ASTM) S-SPC (02-04) MaTest
50 Density Container C-DC (02-04) Controls
51 Density Sleeve Apparatus S-SA 01 Controls
52 Dessicator C-DCT (01-11) ; AS-DCT 01 Local
53 Dial Gauge
S-DG
51,55~57,58~60,64~66,70~71
73~75,80,85,87,91~93,95
97~102104,106~109,111,118,
119
SI-DG
06,10,26,27,29,32,33,39,42
45,47,49,50~57,59
Mitutoyo,
Baker,ELE ,Mahr
54 Digital Earth Tester S-ERE 01 Megger
55 Digital Pressure Gauge (vacuum) C-PG (01,03,04) Druck / Accu Tech.
56 Digital Thermometer
A-DT
08~10,14,20~21,23~25,2732~33,36~37,40~42,44,
49~ 60,62~72
ETI / Center
57 Digital Vernier Caliper
C-VC
09,19~21,23~27,29,30,32~34,
36~43
Mitutoyo
58 Drying OvenS-DO
(03~04,07~18,20~23,25~28)
GenLab, Memmert,
Labcon,
59Drying Shrinkage Apparatus + Calibration
RodA-GM 01,03 / A-BR 01 ELE
60 Dynamic Cone Penetrometer S DCP 01N. Islam
Engineering
10.2
7/24/2019 Company Profile - RTA
80/100
Sr.
No.
Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - MATERIA
61 Electronic Balance
S-EB
02,05,07,09,12~13,16,18~232
6~31,34~35,37~38,41,43,44~
46
FUJ-EB 01
Adam Equipment /
Scaltec / Shimadzu
/ Vibra / Citizen /
Shinko Denshi
62 Flakiness Sieves A-FS (01-07) ELE
63 Flexural Testing Frame C-FS 01 Unit Test
64 Flow Table C-FT 01,02 MaTest
65 Fluidity Cone (Brass) C-FC (06,08,10,13,16~21) Local
66 Glass Jar A-GJ 02 -
67 Hand Drill AIN-HD 01 Makita
68 Hand Drilling Machine C-HD (01~05)Bosh / Black &
Decker / Makita69 Heat of Hydration Equipment C-HHY 01 ELE
70 Hot Plate AS-HP 01 Westpoint
71 Humidity Curing Cabinet C-CCA 01 Technotest
72 Hydraulic JackS-HJ (04-08,10,12-16)
AD-HJ 01Hi-Force
73 Hydrometer A-HDM 01~03 Terinber
74 Hygro Thermometer S-HY (01-02) ; C-HY 04,06,07 Humbolt / ETI
75 Impact Testing Machine A-IM 01 ELE
76 In-situ CBR Set S-ICBR 01 Wykeham Farrance
77 Jolting Table Apparatus C-JT 01 Amil
78 Large Pouring Cylinder
S-LPC (3,18,27,32,35,4043-44,47,52,53,54,55,56
59-61,64-
65,67~68,70,71,73~75
81-84,87-88,91,94,96-100
103~124,126,127,129~131
134,135,137~138,142
146~148,150,152~156,
158~162,165,166,168~171
174~177,179~185,187
189~198,200~223)
Unit tests / ELE /
Controls / Aimil /
Local
79 Le Chatelier Apparatus C-LCA 05,06,07,08 -
80 Linear Shrinkage Mould S-LSM (02-03) Matest / ELE
81 Load Cell C-LC 01; S-LC 02; AS-LC 01 Humbolt / Matest82 Los Angeles Machine A-LA 01 ELE
83 Manhole Testing Apparatus C-MH 01 Technotec
84 Marsh Cone Funnel C-MF 01 OFI
85 Marshal Compaction Mould S-MCM 01 ~ 16 ELE
86 Measuring Tape S-MT 1p, 1q, 1r, 1t,1u,1v, 1w Stanley / Colt
87 Metal Length Gauge A-LG (01,05) Impact
88 Metal Plug S-MP (04,07~09); A-MP 02 Unit Test / Local
89 Moisture Meter C-MA 01 ETI Ltd.
90 Mould Cone & Tamper A-MO 01 ; A-TO 01 Impact
91 Multimeter C-MM 02 Fluke
92 Multitester S-MT 03~04 / AS-MT 01 ELE , Humboldt
10.3
7/24/2019 Company Profile - RTA
81/100
Sr.
No.
Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - MATERIA
93 Nord Test Cell Apparatus C-NTS (01~03) Labscientific
94 Nuclear Density Gauge S-NDG 01~06 CPN International
95 Percolation Mould S-PM 01 Local
96 Plasticity Index Mould S-PIM 01 -
97 Point Load Tester A-PL 01 ELE
98 Pressure Gauge C-WPA 01~02,04~09 KI
99 Proving RingS-PR 01,04~06
AS-UCS 01 / PR 01
Wykeham
Farrance/ ELE
100 Pull-off tester C-CP (01-02) Electrometer
101 Radiation Survey Meter S-RAD 01~05 S.E. International
102 Rapid Chloride Permeability Apparatus C-RCP (01-03) Technotech
103
Rapid Chloride Permeability Test Power
Supply System ( Chloride DiffusionApparatus-Nord )
C-CDA 01 Lab Tech Scientific
104 Rebar Locator (Covermeter) S-PFR5 01 Proceq
105 Rebound Hammer & Anvil C-SHA 01,02 ELE
106 Rebound Hammer Test (Digi Schimidt) C-SH 04 Controls
107 Riffle Box / Sample Splitter S-RB (01-07) Controls / Impact
108 Rock Sieves A-RS (01-15) Local
109 Sand Cone Apparatus (ASTM) S-SC (2-3) MaTest
110 Sand Cone Density Apparatus (ASTM) A-SPC 05 MaTest
111 Sand Equivalent Set S-SES 02 Impact
112 Sand Equivalent Shaker S-ES 03 ELE
113 Scale Mud Balance C-SMB 01 Humboldt
114 Scanlog Covermeter S-PRFS 01 Proceq
115 Setting Time Apparatus (Vicat Apparatus) C-STA 01 Matest116 Sieve Shaker S-SS 01 Local
117 Durometer for Shore Hardness SDU-01 Matest
118 Slump Cone + Tamper C-CN (06,09~14) Controls
119 Solid Cone SI-CN (01,03,05,07) Local
120 Split / Slotted Surcharge Weight
S-SSW
07,10~12,19~21,23~26,29~30
32,35,37~38,40,46,48,53
56~57,63~68,70~81
Unit Test/ Controls
/ ELE
121 Steel Engineering Ruler S-SER (03-17)EIS / Yosogo / EPL
/ Omega
122 Stop Watch
S-SWT
22,23,25,26,28~29,41,49,53,5
6~6466~73
Impact / Citizen
/Q&Q
123 Tamping Rod C-TR (09,12~13,14,15) Local / Controls
124 Test Sieve (ASTM)
A-TS
01~08,12~15,17~18,25,27~29
31,34,37,39~47,50~65,67~68,
71,72~84
MS-ATS 01~32,34~38,
40,42,43
ELE / WS Tyler
10.4
7/24/2019 Company Profile - RTA
82/100
Sr.
No.
Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - MATERIA
125 Test Sieves (BS)
S-TS
01~14,17~22,24,29,32~34,36
45,50~51,53~54,56,60~61,71
83~90,92~94,99~108
112~120,122~129,133~134
136~154,156~158,160~174
176~192,194,196,197,199
203~214
MS-TS 01~29,34~42
FUJ-TS 29
Endecotts, ELE,
WS Tyler, Impact,
Glennemer, CMH,
Citizen, Humboldt
126 Thickness Gauge A-TG 01 Impact
127 Tile Testing Machine C-TTM 01 Vertex
128 Three Gang Mould (50 mm) C-GMO (01-11~15) Local129 Three Gang Prism Mould
C-GM (01-03,07-10,14-16
20~23)Technotech
130 Ultrasonic Pulse Velocity C-USPV 01 Proceq
131Unconfined Compressive Strength (UCS)
FrameAS-UCS 01 AIML LTD / BAKER
132 Universal Sample CBR ExtruderS-EXT 01
AS-EXT 01US Jack, ELE
133 Universal Testing Machine C-UTM 01, 02 Tinius Olsen
134 Vernier Caliper C-VC 19,27,29,37~39,43~48 Mitutoyo
135 Vertical Cylindrical Capper - Local
136 Vibrating Hammer S-VH 01-02 Makita / Bosch
137 Vibrating Table A-VT 01 Vibratechniques
138 Vicat Apparatus C-VA 01 MaTest139 Water Bath
C-WBA 01-02
AS-WBA 01Control / Humboldt
140 Water Permeability Apparatus C-WP 01~05 Technotech / KI
141 Water TankC-WT 01-76
C-TK 01Local
142 Wet Film Comb WFC 01 Elcometer
10.5
7/24/2019 Company Profile - RTA
83/100
Sr.
No.Name of Equipment Asset No. Manufacturer
1 Acoustic Calibrator for Sound Level MeterCH-EMN 01 / 01A , 02 /
02A, 03 / 03ACasella Cel
2 Air Quality Meter CH-AQM 01 AeroQual
3 Air Quality Station CH-EMA 02, 06 AeroQuality
4 Atomic Absorption Spectrometer CH-AAS 02 Perkin Elmer
5 Analytical Balance CH-EAB 01 Citizen
6 Beaker Breakables -
7 BOD OxitopCH-BOD
02,08,11,13~20,22~36WTW
8 BuretteCH-BUR
(06,07,2f)
Simax, Witeg,
Qualicolor
9 Cleveland Open Cup Tester CH-COC 01 Koehler
10 COD Reflux Apparatus Breakables -
11 Conical Flask Breakables -
12 Corrosion Analysis Instrument CH-CA 01 Proceq
13 CrucibleCH-CRU
42~51,53~57,61,64-
14 Data Logging colorimeter CH-DCOL 01 Hatch
15 Dessicator CH-DCT 01~04 Local
16 Digital Pipette CH-DP (01,04,14)
Finepipette,
Socorex,
Hirschmann
17 Distillation Apparatus CH-DAS 01 -
18 Ductility Apparatus CH-DA 01 -
19 Ductility Mould CH-DCM 01~03 ELE
20 Electrical Conductivity Meter CH-ECM 01 Hanna
21 Environmental Monitoring Sensor CH-EMS 01, 02 -
22 Evaporating Porcelain Dish CH-PD 01~07,09 -
23 Gas Analyser CH-SGM 01 Land
24 Gas Chromatography / Mass Spectroscopy CH-GC/MS 01 -
25 Glass Boiling Tube Breakables -
26 Graduated PipetteCH-VP
03,12,14,16~18,20,23
Witeg, K-
Max,Qualicolor,Revorex,
Borosil,Marienfiel
d, Kimble
27 Heating Mantle CH-HMT 02
Electro Thermal,
Tyco Thermal
Control
28 Heating Oven CH-LHO 01 -
29 High Precision Weights CH-GS 01 Kern
LIST OF MAJOR EQUIPMENTS - CHEMICAL
10.6
7/24/2019 Company Profile - RTA
84/100
Sr.
No.Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - CHEMICAL
30 Hot Plate CH-HP (02-03)West Point,
Cliffton
31 Hydrolab CH-MSH 01 Hach
32 Hydrometer CH-HDM 01~05 Terinber
33 Incubator CH-ICB (01-02) WTW / Heraus
34Inductively Couple Plasma - Optical
Emission Spectrometer ( ICP-OES )CH-ICP-OES 01 PerkinElmer
35 Karl Fisher Titrator CH-KF 01 Karl Fisher
36Kinematic Viscosity Bath (Cannon Fenske
Viscometer)CH-KVB 01 Koehler
37 Laboratory Centrifuge CH-LC 01 Sigma38
Laboratory Multiparameter Tester (pH
meter)CH-LMP (01-02) WTW , Inolab
39 Loss on Heating Oven & Containers CH-LHO 01 -
40 Magnetic Stirrer CH-MSR 01 Remi Equipments
41 Measuring Cylinder
CH-MC
03,06,09,11~12,14~16
20~24
-
42 Mechanical Shaker CH-MS 01 Remi Equipments
43 Microdust Pro (dust monitoring) CH-EMD 01 Casella Cel
44 Microtherm Heat Stress (WBGT) CH-EMH 01 Casella Cel
45 Microtherm Indoor Air Quality CH-EMA 01 Casella Cel
46 Muffle Furnace CH-MF (02,03,04) Carbolite
47 Optical Emission Spectrometer CH-OES 01 Quantron
48 Oxygen Bomb CH-OXB 01 Parr
49 Particle Mass Counter CH-EPM 01Met One
Instruments
50 Penetration Apparatus CH-NP 01 ELE
51 Penetration Needle CH-NP 01/ 01 & 02 ELE
52 Pensky Martens Closed Cup Tester CH-PMC 01 -
53 Portable pH meter CH-pHM 04-07 Hanna /Hersteller-
54 Photometer 5000 CH-P5000 Palintest
55 Platinum Crucible with Lid CH-PC (01-06) Indian Make
56 Refrigerator CH-RF (02) Everest/ Hitachi
57 Riffle Box / Sample Splitter CH-RB 01,02 Controls
58Saybolt Viscosity Apparatus (Furol &
Universal Orifice)CH-SV 01 -
59 Separating Funnels Breakables -
60 Softening Point (Ring & Ball Apparatus) CH-RBA 01 -
10.7
7/24/2019 Company Profile - RTA
85/100
7/24/2019 Company Profile - RTA
86/100
Sr.
No.Name of Equipment Asset No. Manufacturer
1 Air Sampler MB- AS 01-AS 03,AS04/RFM 02
Aquaria/Setra
2 Anaerobic Jar MB- AJ 01 Hi media
3 Autoclave with Pressure Gauge
MB-ACL 01,MB-ACL 03/PG
01 ACL 04/PG01-ACL-05/PG
02
Hirayama,Equitron,
JSAC-60
4 Autoleveller SI-AL 01 Nikon
5 Biological Safety Cabinet MB-BSC 01, BSC 02-03 Thermo,Chcbiolus
6 Blender MB-BL 01 Waring
7 Digital Colony Counter MB-DCC 01,DCC 02 Selecta,Stuart
8 Digital Thermometer ADMB-DT 01 Center300
9 Drying Oven MB-HAO 01-DO 35 Labcon
10 Differential Pressure Tester DPT 01 Setra
11 Electric Pipettor MB-EP 01~02 Jen Cons
12 Electronic Balance MB-EB 01~02,EB 58-59 Citizen
13 Filtration Unit MB FU 01~02 , MFU 02 Millipore
14 Glass Thermometer GTHE 08 -
15 High Precision Weight ADCH-GS 01,GS 24~26 Kern
16 High Flow Meter HFM 01Mesalabs
(Defender500
17 Hot Plate Stirrer AD-HY 21~24-30,MB-HP West Point
18 Hygro Thermometer
CH-THE 66,MB-HY 03~08,10
12,HY 61,HY 70~83, HY
101,108
ETI,HTC-2
19 Incubator MB -ICB 01~05/01-05/02
,ICB 09~ICB 14
WTW,JSG1-
050T,Scichemtech
20 Infrared Thermomter with ProbeADMB-IFT 01,IFT 02,IFT
03,IFT 04,IFT 05-06,MFT 01
Testo, Fluke
21 Max-Min Thermometer AD-THE 02,DSL-THE 01 ETI
22 Media Dispenser MB-MD 01~02, RDI 01Ceramus Classic ,
Hirscumann
23 Microscope MB MIC 01,MIC 02 Motic
24 Micro Pipette MB-DP 01~06,MDP-07~10 Witeg,Plastx
25 pH Meter (pocket type) MB-pH 01,Phm-14Hersteller-
Prufzertifikat
26 Plate Master MB-PL 01 Hi media
27 Polymerized Chain Reaction AD-PCR 01 --
28 Refrigerators
MB-REF01~05,MB-REF
06,CH-REF 06 ,REF
10~12,REF 16
Hitachi-TSB2FF
29 Rotometer Flow Meter RFM 01 Zefon
30 Stomacher MB-STO 01, STO 02 Seaward, Easymix
31 Stop watch SWT 107,SWT 100 Casio
32 UV Lamp & Viewing Box MB-UVL 01,UV 03 Millipore,Medwise
33 Vortex Mixer MB-VM 01~02, VM 03-04
Wiggan
Hauser, Maximix
Plus
34 Water BathMB-WBA 01~04,WBA
16,WBA 13~15USA / Control
35 Water Purifier MB-WPU 01 Millipore
LIST OF MAJOR EQUIPMENTS - MICROBIOLOGY
10.9
7/24/2019 Company Profile - RTA
87/100
Sr.
No.Name of Equipment Asset No. Manufacturer
1 Rig Machine with AccessoriesRM 01
(Dando-I)Dando
2 Rig Machine with AccessoriesRM 02
(Briteli- I)Briteli
3 Rig Machine with AccessoriesRM 03
(Edecco-IV)Edecco
4 Rig Machine with AccessoriesRM 04
(Edecco-I)Edecco
5 Rig Machine with AccessoriesRM 05
(Dando-III)Edecco
6 Rig Machine with AccessoriesRM 06
(Edecco-II)Edecco
7 Rig Machine with AccessoriesRM 07
(Dando-II)Dando
8 Rig Machine with AccessoriesRM 08
(Edecco-III)Dando
9 Rig Machine with AccessoriesRM 09
(Dando-IV)Dando
10 Rig Machine with AccessoriesRM 10
(Agbo-I)Agbo
11 Rig Machine with AccessoriesRM 11
(Acker- I)Acker
12 Rig Machine with AccessoriesRM 12
(Edecco- V)Edecco
13 Rig Machine with Accessories RM 13(Atlas) Atlas
14 Rig Machine with AccessoriesRM 15
(Long year)Long year
15 Rig Machine with AccessoriesRM 16
(Atlas II)Atlas
16 Rig Machine with AccessoriesRM 18
(Simco)Simco
17 Rig Machine with AccessoriesRM 19
(Mobile 30)Mobile 30
18 Rig Machine with AccessoriesRM 20
(Mobile 31)Mobile 31
19 Autoleveller SI-AL 01 Nikon
20Electronic Water Level Indicator
(Dip Meter)- -
21 CPTU - Machine -Pagani (Maximum
capacity 220 kN)
22 SPTU - Machine -Pagani (Maximum
capacity 220 kN)
23CPT Machine
SI-CPT (ME 23)-01 / SI-CPT
(ME 09)-02 / SI-CPT (ME 21)-
03 / SI-CPT (ME 18)-04
Pagani
LIST OF MAJOR EQUIPMENTS - GEOTECHNICAL
10.10
7/24/2019 Company Profile - RTA
88/100
Sr.
No.Name of Equipment Asset No. Manufacturer
LIST OF MAJOR EQUIPMENTS - GEOTECHNICAL
24 Solid Cone SI-CN (01,03,05,07) Local
25 Pressuremeter Apparatus (Preboared) SI-PBP 01 Oyo Corporation
26 Pressure Gauge SI-PG 01~04 Yamato Keiki
27 Digital Pressure Indicator (Elasmeter) SI-ELM 01 Oyo Corporation
10.11
7/24/2019 Company Profile - RTA
89/100
GEOSCIENCET
ESTINGL
ABORATORY
ORGANISATION
CHART
CH
AIRMAN
VICE
CHAIRMAN
CHIEFEXECUTIVE
OFFICER
GROUPTECHNICAL
MANAGER
GROUPQUALITY
ASSURANCERESEAR
CH
&DEVELOPMENT
MANAGER
GROUPFINANCE
ANDPURCHASE
MANAGER
GROUP
ADMINISTRATION
MANAGER
13.
1
7/24/2019 Company Profile - RTA
90/100
GEOSCIENCET
ESTINGL
ABORATORY
ORGANISATION
CHART
CHAIRMAN
VICECHAIRM
AN
CHIEFEXECUT
IVE
OFFICER
Group
Administration
Manager
GroupFinance&
Purchase
Manager
Gro
upQA,R&D
Manager
EHS/BM
Manager
EHS/BMOfficer
Maintenance
Technician
WorkshopIn
charge
Vehicle
Controller
Mechanic/
Electrician
LatheMachine
Operator
I
TIncharge
ITAssistant
ChiefAccountant
StoreIncharge
Senior
A
ccountant
A
ccountant
DebtCollector
MarketingIn
charge
Marketing
Executive
HRIncharge
PublicRelation
Officer/s
Administration
Coordinator
SeniorQAOfficer
Q
AOfficer
Doc
umentation
Clerk
C
alibration
Technician
PurchaseOfficer
13.
2
7/24/2019 Company Profile - RTA
91/100
GEOSCIENCET
ESTINGL
ABORATORY
ORGANISATION
CHART
UnitHead
UnitHead
UnitHeadMaterial
TechnicalManagerCivil
(Dubai/Sharjah)
UnitHead
TechnicalManager
Chemical/Microbiology
(Dubai)
UnitHeadGeotech
nical
O
eration
GroupTechnical
Manager
ChiefExecutive
Officer
QAOfficer
Se
niorQAOfficer
G
roupQAR&D
Manager
SalesIncharge
SalesExecutive
U
nitHead
ReportDelivery
Coordinator
Sample
Coordinator
DataFeeder
Assistant
Technician
Laboratory
Technician
SeniorTechnician
Dept.Incharge/
Coordinator
Technical
Supervisor
aera
Geotechnical
Geologist
DataFeeder
ara
Senior
Technician
Laboratory
Technician
SeniorChemist
Chemist
Environmental
Engineer
DataFeeder
Senior
Microbiologist
Microbiologist
Da
taFeeder
Chemical
GeotechnicalSite
Coordinator
Drillers
AssistantDrille
r
Sample
Co
ordinator
Sampler/s
Microbiology
13.
3
7/24/2019 Company Profile - RTA
92/100
7/24/2019 Company Profile - RTA
93/100
Mobile E-mail
KEY PERSONNEL
ContactsSr.
NoName Designation
18 Ali Al Halabi Technical Manager - Materials 025-9873560 [email protected]
19 Hamsakutty M.P Unit Head (Materials) 050-2599465 [email protected]
20 Ali Jasir Ali Unit Head - Geotechnical050-1063218/
21 Sukesh K.P Unit Head (Chemical) 052-9873574 [email protected]
22 Seenath Abdul Rasak Senior Microbiologist 052-9873579 [email protected]
23 Sajid Hussain Butt Technical Manager - Materials 050-7133032 [email protected]
24 Riyad Raihan Technical Supervisor - Materials 052-9873528 [email protected]
25 Engr. Sunny Paily Technical Manager 050-7168727 [email protected]
26 Jeejo P.Variath Unit Head - (Materials) 050-5086961 [email protected]
Abu Dhabi
Al Ain
Sharjah
14.2
7/24/2019 Company Profile - RTA
94/100
ABB Industries Ltd. Al Husam General Contracting
Abu Dhabi Health Services (Seha) Al Imar Medical Clinic
Abu Dhabi Municipality Al Islami Foods
Abu Dhabi Police Al Jaber Grinaker Lts (Alec)
Ace International Al Jurf
Actco General Contracting Co. Llc Al Khaleej
Acura General Cont. Al Mafkhar Engineering Consultant
Admiral Plaza Al Maha Arjaan
Adnan Safarini Al Maja Rotana Hotel
Adnec Al Manzoor Block Factory
Adso Llc Al Marwan
Adssc Al Maseelah Block Factory
Adwea Al Moosa Contracting (Pioneer) Llc
Afcons Al Muhairy Contracting
Aj Designs Al Naboodah Contracting
Akar Technical Al Naboodah Engineering Services
Al Aha