Embed Size (px)
Citation preview
21.10.2013
Curriculum Vitae S. V. Lomov
Full name: Stepan Vladimirovich Lomov
Степан Владимирович
Ломов
Date of birth: 29 January 1955
Place of birth: Leningrad (St.-Petersburg)
Nationality: Belgian, Russian
Gender: male
Civil state: married
Address: Department of the Materials Engineering (MTM), Kasteelpark Arenberg
44, B-3001 Leuven, Belgium
e-mail: [email protected]
tel +32-16-32-12-10, +32-16-32-06-00 (secretary)
fax +32-16-32-19-90
web site: www.composites-kuleuven.be
1 QUALIFICATIONS
School: 30th Physics & Mathematics School, Leningrad - 1972
University: Leningrad Polytechnic Institute (St.-Petersburg State Polytechnical University), Physics &
Mechanics Faculty, Chair of Applied Mathematics; Diploma: Dipl. Engineer-Mathematician (magna cum
laude), 1978
PhD: Federal Research Institute of Transportation Machinery, St-Petersburg
Candidate of Technical Science (equivalent to PhD degree), 1985. Subject: Research into mathematical
modelling and practical construction of ballistic and shock protective structures
Doctor of Technical Science (Doctor Habille) in Textiles Material Science, 1995. Thesis: "Mathematical
prediction of the structure and mechanical properties of woven fabrics for technical usage", St.-Petersburg
State University of Technology and Design
Curriculum Vitae and Bibliography S. V. Lomov 2
2 RESEARCH CAREER
1978 – 1989 Researcher, then Senior Researcher at the Federal Research Institute of Transportation Machinery,
St.-Petersburg subject: research on the mathematical modelling and construction of ballistic protective structures.
1989 – 1999 Senior Researcher, then Professor of the St.-Petersburg State University of Technology and Design,
Chair of the Mechanical Technology of Fibrous Materials (Head: Prof. N.N.Truevtzev)
Research projects:
modelling of structure and properties of woven fabrics
modelling of textile ballistic protection
quality control in yarn production
experimental studies of structure and mechanical
behavior of yarns and fabrics
design and technology of folk art fabrics
1994 – 1998 (three-four months a year) Research activities in De Montfort University, Leicester, UK (visiting scientist) on yarn fibrous structure and
protective textile structures (School of Design and Manufacture, Head - Dr. R.Harwood)
Supervising of PhD: Eugene Belov
1999 – present: Research Fellow/Research manager and Part-time Professor of K.U.Leuven, Department MTM,
Composite Materials Group (Prof. I.Verpoest). From 2013 – the Coordinator of the Composite Materials Group.
From 2002 – member of Independent Academic Staff (Zelfstandig Akademisch Personeel
2015 – present: Toray Professor (Toray Chair for Composites Materials at KU Leuven)
Research career in K.U.Leuven:
1999 – 2001: Senior post-doc grantee of the Research Council of K.U.Leuven (two grant terms).
2001 – 2014: Senior Research Fellow
2002 – present: Part-time professor
2014 – present: Research Manager
Research interests
Structural mechanics of textiles, composites and biomaterials
Multi-level modelling of heterogeneous media
Internal geometry, mechanical properties, permeability of textiles and composites
Development of "virtual material" software
Experimental studies of properties of textiles and composites
Advanced reinforcements (textile, 3D, nano…)
Curriculum Vitae and Bibliography S. V. Lomov 3
3 ACADEMIC
Regular courses (5-year engineers and Master curriculum) in SPbGUTD:
Mechanical technology of Fibrous Materials;
Mathematical Modelling;
Applied Mechanics of Textiles
Regular Master courses in K.U.Leuven:
H0Z78A Composite Processing: Textile Preforms for Composites (2001/2002 – 2006/2008)
H0K56A General Methodology of Modelling (2001/2002 – 2006/2008)
H165 Capita Selecta: Mechanics of Textile Reinforcements (2000/2001 till 2006/2007)
H9X40A Polymer Composites II (2007/2008 – present)
H02X3A Polymer Composites II - Fundamental Mechanics of Heterogeneous Materials (2007/2008 – present)
H02Y4A Textile Preforms for Composites (2007/2008 – present);
H00E4A Properties of Composites A&B (2008/2009 – present)
Doctoral and Master courses in K.U.Leuven and in other universities
1999/2000, Structural Mechanics of Textiles, K.U.Leuven
March 2001 Mechanics of textile reinforcements, IFP, Gothenburg, Sweden
May 2001: Structural Mechanics of Textiles, Politecnico di Milano:.
May 2004: Structural Mechanics of Textiles,Techical University Liberec, Czech Republic.
May 2008 Mechanics of heterogeneous media, Politechnico di Milano
November 2009 Mechanics of heterogeneous media, ATHENS, K.U.Leuven
May 2010 Textile composites, St-Petersburg State University of Technology and Design
May 2011 Textile composites, Politechnico di Milano
July 2012 Textile composites, University of Girona
May 2014 Mechanics of heterogeneous media, Politechnico di Milano
February 2015 Micromechanics of composites, Skolkovo Institute of Science and Technology (Russia)
Supervising PhD and Master studies
Promotor/copromotor of PhD (italics: current)
Name student Topic Year
defence
SPbGUTD
1 Evgeny Belov Modelling of textile yarns snarling 1999
2 Olga Venderevskaya
KU Leuven
1 Andreas Prodromou Mechanical modelling of textile composites utilising a cell method 2004
2 Thanh Truong Chi The mechanical performance and damage of multiaxial multipy carbon
fabric reinforced composites
2005
3 Frederik Desplentere Multiscale modelling of stochastic effects in mould filling simulations for
thermoplastic composites
2007
4 An Willems Forming Simulation of Textile Reinforced Composite Shell Structures 2008
5 Bart Verleye Computation of the permeability of multi-scale porous media with
application to technical textiles
2009
6 Katleen Vallons The behaviour of carbon fibre-epoxy NCF composites under various
mechanical loading conditions
2009
7 Maarten Moesen Modeling of the geometry and mechanical behavior of bone scaffolds 2009
8 Greet Kerckhofs Morphological and mechanical quantification of porous structures by means
of micro-CT
2009
9 Jian Xu Meso-Scale Finite Element Fatigue Modelling of Textile Composite
Materials
2010
10 Kristof Vanclooster Forming of multilayered fabric reinforced thermoplastic composites 2010
11 Dmitry Ivanov Damage analysis of textile composites 2010
12 Ichiro Taketa Analysis of failure mechanisms and hybrid effects in carbon fibre reinforced
thermoplastic composites
2011
12 Oksana Shishkina Nano-reinforced foams: modelling and experimental 2014
Curriculum Vitae and Bibliography S. V. Lomov 4
Name student Topic Year
defence
13 Andy Vanaerschot Multi-scale modelling of spatial variability in textile composites.
Uncertainty quantification based on experimental data of internal geometry
2014
14 Valentin Romanov Nano-engineered fibre reinforced composites: modelling 2015
15 MohhamadAli
Aravand
Thermoset/thermoplastic/nano-reinforcement systems 2015
16 Atul Jain Fatigue of short fibre composites: modelling 2015
17 Yasmine Abdin Mechanical properties and fatigue of random steel fibre reinforced
composites
2015
18 Seyyed Ahmad
Tabatabaei
Meso-FE modelling of textile composites
19 Ilya Straumit Micro-CT based models of textile composites
20 Nghi Nguen Non-conventional laminates
21 Nikolay Petrov XFEM modelling for textile composites
22 Mahoor Mehdikhani Effect of defect in composite laminates
20 Man Zhu Modelling of fatigue of delaminations in fibre reinforced composites
21 Karen Soete Variability of natural fibre composites
22 Jun Tang Quasi-ductile fibre reinforced hybrid composites
Universite Bruxelles
Libre
1 Badadjida Wintiba Multiscale modelling of degradation in woven and 3D-reinforced
composites (promotor: Thierry Massart)
Supervisor of Marie Curie PhD Fellows (2001-2004, 12 students from 10 European universities, 2007-2009, 2
full-time PhD students)
Supervisor visiting post-docs, PhD and Master students in K.U.Leuven: University of Parma and Politechnico
di Milano (Italy), University of Isfahan (Iran), St-Petersburg State Polytechnical University, Skolkovo Institute of
Science and Technology and Perm Technical University (Russia), University of Zaragoza (Spain), Osaka and
Tokyo University (Japan), Technical University of Lodz (Poland), University of New Mexico (USA), University
of Algeria, Riga Technical University (Latvia), Kaunas Technical University (Lithuania), Technical University
Liberec (Czech Republic), Donghua University (China)
Curriculum Vitae and Bibliography S. V. Lomov 5
4 RESEARCH PROJECTS
Finished research project at K.U. Leuven (promotor or co-promotor, principal investigator):
European projects
1. "Technologies for Carbon fibre reinforced modular automotive structures (TECABS)" (2000-2003)
2. GROWTH-Marie Curie Training Network on “Composites Properties and Processing” HPMT-CT-2000-
00030 (2000-2004),
3. GROWTH-Network on “Composites in Transport” (2001-2003)
4. IP “Nanotechnologies and nano-sciences, knowledge-based multifunctional materials, and new production
processes and devices” (AVALON), 2006 – 2009
5. STREP “Integrated Tool for Simulation of Textile Composites (ITOOL)”, 2004-2007, partners: EADS,
Dassault, Alenia Aeronautica, DLR, ESI Group etc
6. Multidisciplinary Research and Training on Composite Materials Applications in Transport Modes
(MOMENTUM), Marie Curie Training Network, 2006-2009
7. Automated tow placement technology (AUTOW), 2007-2009
8. EDA: "New materials for individual protection", 2009-2010
9. Simulation based solutions for industrial manufacture of large infusion composite parts (INFUCOMP); 2009-
2013
10. Nano-reinforced foams (NANCORE), 2008 – 2012
11. IMS&CPS (nano-engineered fibre reinforced composites), 2010 -2013
12. HIVOCOMP (high volume composites for automotive), 2010 – 2014
13. M-RECT (PEEK + carbon nanotubes), 2010 – 2014
14. SIMPOSIUM (NDT software integration), 2011 – 2015
15. QUICOM (micro-CT), 2012 – 2016
IWT/FWO (Flanders Government) projects
1. "Advanced Numerical Techniques in R&D on Processing and Properties of Textiles and Textile Composites"
(STWW/000148 2000-2002)
2. “Predictive tools for permeability, mechanical and electro-magnetic properties of fibrous assemblies:
Modelling, simulations and experimental verification” (GBOU/020209 2003-2006)
3. Study of formability of self-reinforced polypropylene, 2004-2006
4. Thermoforming of thermoplastic composite products based on two-dimensional textiles: experimental
research and simulation (2004-2007)
5. OPTIMESS research networks (2005-2008, 2009-2012)
6. FWO Forming of thermoplastic sandwich constructions: experimental research & numerical simulation, 2007-
2010
7. IWT Design of composite aeronautic parts, 2007-2008
8. FWO Micro-meso-macro homogenization of the fatigue degradation of textile reinforced composites, 2006-
2011
9. IWT Experimental and theoretical methods for new generation of metal fibres for automotive glass
production, 2010-2012
10. FWO project G.0354.10 Characterising the variability in geometry and mechanical properties of textile
composites using multi-level modelling 2010 – 2013
11. NanoForce: Next generation nano-engineered polymer-steel/CNT hybrids, 2010-2015, a cluster of projects
(2011 – 2014):
SBO1: Steel fibre reinforced composites
SBO2: Modelling of fatigue of nano-engineered fibre reinforced composites
SBO3: Nanofibres
Micro-mechanical & Fatigue modelling of short steel fibre reinforced composites (ModelSteelComp)
12. Baekeland: Fatigue life prediction of random fibre composites using multiscale modelling methods, 2011 –
2015
K.U.Leuven projects
1. GOA/98/05: "Development of unified models for the mechanical behaviour of textile composites” (1998-
2002)
2. OT/02/58: "Concurrent multi-scale design/engineering of textile composites" (2002-2004)
3. OT/04/26: “Mesomechanical modelling of bone, scaffolds and implants” (2004-2008)
4. GOA/09 New model-based concepts for nano-engineering polymer composites, 2009 – 2014
Projects directly funded by industry and foreign reseach funds:
1. Dow Automotive: Predictive models for short fibre reinforced polypropylene, 2003-2004
Curriculum Vitae and Bibliography S. V. Lomov 6
2. EADS Germany: Damage modelling in textile composites, 2004-2007
3. ONERA, France: Study of internal structure of carbon reinforcements, 2003
4. Snecma Group, France: Modelling of textile composites, 2003; 2006-2009
5. Toyota, Japan: Performance of carbon-fibre composite car body structures, 2006-2009
6. 3Tex, USA: 3D woven and braided composites, 2009 – 2010
7. Owens Corning: fatigue of materials for wind turbine blades, 2009-2011
8. Telene, France: innovative high ductile resins, 2013-2014
Other
1. Research Promotion Foundation, Cyprus: Analysis and Design of Polymer Nanocomposites, 2007-2009
Promotor of Visiting Fellowship grants of K.U.Leuven and FWO
T. Tsujikami (2003), L. Gorbatikh (2005, 2006), A. Warrier (2007-2009), T. Kurashiki (2011)
Current research projects (promotor or co-promotor)
Funding source Title Years
EC – FP7 CANAL (non-conventional laminates) 2013 – 2016
IWT/FWO/SIM
(Flanders
Government)
FWO Variability of natural fibre composites 2014 – 2018
M3Strength SBO: Modelling of damage and fatigue in textile
composites
2014 – 2018
M3Strength IBO: Effect of defects in fibre reinforced composites 2014 – 2017
Direct industry Nanocyl, Belgium: Nano-reinforced carbon fibre reinforced
composites
2007 – …
Toray, Japan: Carbon reinforced composites (named Chair and
research projects)
2012 – 2018
Russian
Federation ASPEM-CDMM: a cluster of three projects on composite
materials:
Predictive models for damage, strength and fatigue of fibre
reinforced composites, including defects-affected response
Simulation-based design of hybrid nano-reinforced composite
materials for toughness
Development of Master courses on composite materials for
SkolTech
2014 – 2018
Total reseach funding ca 1.5 mio EUR / year
Curriculum Vitae and Bibliography S. V. Lomov 7
5 RESEARCH OUTPUT
[30.10.2015]
A comment on the publication history: the research carrier of S.V. Lomov has started in 1978, but first
publications in international journals appeared in 1995 only due to confidentiality of the work on terminal
ballistics and difficulties of publishing abroad from USSR.
Invited lectures in conferences, workshops, summer schools
1. 5th
International Conference on Textile Composites, Leuven, Belgium, 18-20 September 2000
2. Structural Integrity of Composite Materials and Structures, A Residential Meeting and Workshop, Isle of
Capri, Italy, 20-25 May, 2001
3. 5th
ESAFORM Conference on Material Forming, Krakow, Poland, 14-17 April 2002
4. Summer Schools: Intelligent and smart textiles (ITSAPT), Liberec, Czech Republic, June 2004, June
2005
5. 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, 8-13 July, 2007.
6. CompTest-2008 Conference, Dayton, USA, 20-22 October 2008
7. AUTEX-11 Conference, 8-10 June 2011, Mulhouse, France
8. 11th
International Conference on Textile Composites, 19-20 September 2013, Leuven, Belgium
9. CompTest-2015 Conference, Madrid, April 2008
10. 12th
International Conference on Textile Composites, 26-28 May 2015, Raleigh, USA
Organisation of international conferences
Chaiman and the main organiser of international conferences:
1. Finite Element Modelling of Textiles and Textile Composites, St.-Petersburg, Russia, 26-28 September
2007
2. Composites Week @ Leuven and TexCom-11 conference, 2013
3. CompTest-2015 Conference, Leuven, April 2017
Organiser of symposia during international conferences:
1. 15th
European Conference on Composite Materials, Venice, Italy, 2012
2. 8th
EUROMEX Solid Mechancis Conference, Graz, Austria, July 2012
3. 16th
European Conference on Composite Materials, Seville, Spain 2013
4. 9th
EUROMEX Solid Mechancis Conference, Madrid, Spain, 2015
5. 20th
International Conference on Composite Materials, Copenhagen, Denmark, July 2015
6. 17th
European Conference on Composite Materials, Munich, Germany 2016
Member of Organisation or Steering Committees of international conferences:
1. High Performance Composites (HPSC-2002), Seville, Spain, March 2002
2. 3rd
International Workshop on Optical Measurement Techniques, Leuven, Belgium, 2007
3. International Conference on Textile Composites (TexComp), 2000 – present (bi-annual)
4. Composite materials testing and model identification (CompTest), 2003 – present (bi-annual)
5. European Conference on Materials Forming (ESAFORM), composites forming symposium, 2007 –
present (annual)
6. ECCOMAS thematic conference mechanical response of composites, 2007 – present (bi-annual)
7. International Conference on Flow Processes in Composite Materials (FPCM), 2008 – present (bi-annual)
Member of Editorial Boards of international peer-reviewed journals
1. Composite Science and Technology, 2012 – present
2. Composites and Nanostructures, 2009 – present
3. Mechancis and Industry, 2010 – present
4. Textile Reseach Journal, 2012 – present
Curriculum Vitae and Bibliography S. V. Lomov 8
Participation in international benchmarking round-robin exercises
Formability of textile reinforcements for composites
Permeability of textile reinforcements for composites, phases I and II
Expert for research funding organisations:
European Commission;
national science and research funds: Wallonie, France, Chech Repiblic, Poland, Georgia, Qatar, Russian
Federation
“5 in 100” program of the Government of Russian Federation
Skolkovo Institute of Science and Technology (Russia)
Curriculum Vitae and Bibliography S. V. Lomov 9
6 DEVELOPMENT OF SOFTWARE, COMMERCIALISED BY K.U. LEUVEN
WiseTex suite of software for modelling of textiles and textile composites: internal geometry, visualisation,
mechanical properties, permeability, finite element modelling
The WiseTex software is used in universities (TU Lodz; TU Liberec; University of Bremen; University of Aachen;
University of Orleans; University of Stuttgart, Osaka University, The Notre Dame (USA), Hochschule Niederrein,
ENSAIT Roubaux, University of Patras, University of Sofia, Gheorghe Asachi Technical University, Ecole
Politechnique Montreal, Kaunas Technical University, Technische Universitat Munchen, Nanyang University
(Singapore), University of Ulster, Michigan State University, University of Auburn (USA), Ecole Normale
Superieur de Textile (Casablanca), University Tun Hussein Onn (Malaysia), University of Sheffield), research
institutes (IFP, Gotheborg; ONERA, Paris), EU projects consortia (ITOOL, MOMENTUM, AUTOW,
SIMPOSIUM) and nine industrial companies in Belgium, France, UK and USA.
The WiseTex modules for modelling textile composites micromechanics are included in SYSPLY (ESI Group)
software for designing, analysing and optimising composite structures; the textile models of WiseTex are included
in DIGIMAT software (MSC)
Curriculum Vitae and Bibliography S. V. Lomov 10
Bibliography S.V.Lomov
I. Books/Book chapters
I.1. Truevtzev, N.N., Shtut, I.I., Kuznetzov, Yu.I., Primachenko, B.M., Lomov, S.V. Mechanical technology of
textile materials. Reference book, St.Petersburg State University, 1993, 320 p. (in Russian)
I.2. Lomov S.V., Shtut I.I. Modelling the spinning technological processes, St.-Petersburg State University of
Technology and Design, 1995, 56 p. (in Russian)
I.3. Lomov, S.V. Mathematical modelling of the structure and properties of woven fabrics. Laboratory practicum,
St.-Petersburg State University of technology and Design, 1997, 32 p. (in Russian)
I.4. Lomov, S.V., I. Verpoest and F. Robitaille, Manufacturing and internal geometry of textiles, in Design and
manufacture of textile composites, A. Long, Editor. 2005, Woodhead Publishing Ltd. p. 1-60.
I.5. Lomov, S.V. Virtual testing to establish material formability, in: Composite Forming Technologies, A. Long,
Editor, 2007 Woodhead Publishing Ltd, 80-116
I.6. Boisse, P., Akkerman, R., Cao, J., Chen, J., Lomov, S. V., Long, A., Composites forming, Advances in
material forming. Esaform 10 years on, ed Chinesta, F., Cueto, E., Springer, 2007, 61-79
I.7. Verleye, B., M. Klitz, R. Croce, D. Roose, S.V. Lomov, and I. Verpoest, Computation of permeability of
textile reinforcements with experimental validation for monofilament and woven fabrics, in Studies in
Computational Intelligence (SCI), vol 55. 2007, Springer Verlag: Berlin-Heidelberg. 93-109
I.8. Lomov, S.V. and I. Verpoest, Textile composite materials: Polymer matrix composites, in Encyclopedia of
Aerospace Engineering, R. Blockley and W. Shyy, Editors. 2010, John Wiley & Sons, Ltd. p. 2159-2176.
I.9. Lomov SV, ed, Non-crimp fabric composites: manufacturing, properties and applications, ed. SV Lomov.
2011, Cambridge: Woodhead Publisher Ltd.
I.10. Lomov SV, Understanding and modelling the effects of stitching on the geometry of non-crimp fabrics. in
Non-crimp fabric composites: manufacturing, properties and applications. SV Lomov, Editor. 2011; Woodhead
Publishing: Oxford, 84-102.
I.11. Lomov SV, Deformability of textile preforms in the manufacture of non-crimp fabric composites. in Non-
crimp fabric composites: manufacturing, properties and applications. SV Lomov, Editor. 2011; Woodhead
Publishing: Oxford, 117-143.
I.12. Verleye B, Lomov SV, Roose D, Modelling of the permeability of non-crimp fabrics for composites. in
Non-crimp fabric composites: manufacturing, properties and applications. SV Lomov, Editor. 2011; Woodhead
Publishing: Oxford, 242-259.
I.13. Lomov SV, Truong Chi T, Verpoest I, Mechanical properties of non-crimp fabric (NCF) based
composites: stiffness and strength. in Non-crimp fabric composites: manufacturing, properties and
applications. SV Lomov, Editor. 2011; Woodhead Publishing: Oxford, 263-288.
I.14. Ivanov DS, Lomov SV, Verpoest I, Predicting the effect of stitching on the mechanical properties and
damage of non-crimp composites: finite element analysis. in Non-crimp fabric composites: manufacturing,
properties and applications. SV Lomov, Editor. 2011; Woodhead Publishing: Oxford, 360-385.
I.15. Lomov, S. V. (2011). Modelling the geometry of textile reinforcements for composites: WiseTex.
Composite reinforcements for optimum performance. P. Boisse. Oxford, Woodhead Publishing: 200-238.
I.16. Baets, J. and S.V. Lomov, Architecture of textile reinforcements and properties of composites, in Flax
and Hemp fibres: a natural solution for the composite industry. 2012, JEC composites. 61-70.
I.17. Gorbatikh, L., I. Verpoest, S.V. Lomov, J. Ivens, A. Van Vuure, K. Vallons, and J. Baets, Thirty Years of
Composites Research @ Leuven. 2013, Leuven. 160.
I.18. Ivanov, D.S. and S.V. Lomov, Modelling the structure and behaviour of 2D and 3D woven composites
used in aerospace applications, in Polymer Composites in the Aerospace Industry, P.E. Irving and C. Soutis,
Editors. 2015, Elsevier - Woodhead Publishers: Cambridge. p. 21-52.
I.19. Lomov, S.V., From a virtual textile to a virtual woven composite, in Woven Composites (Computational
and Experimental Methods in Structures, vol. 6), M.H. Aliabadi, Editor. 2015, Imperial College Press: London.
109-140.
I.20.
II. International peer-reviewed articles
II.1. Lomov S.V., Gusakov A.V. Modellirung von drei-dimensionallen gewebe Strukturen, Technische Textilen,
Bd.38, 1995, S.20-21
II.2. Lomov S.V., Primachenko B.M., Truevtzev N.N. Two-component multi-layered woven fabrics: weaves,
properties and computer simulation, Int.J.Clothing Sci & Technology, vol.9, N2, 1997, p.98-112
Curriculum Vitae and Bibliography S. V. Lomov 11
II.3. Lomov S.V., Truevtzev N.N. A software package for the prediction of woven fabrics geometrical and
mechanical properties, Fibres & Textiles in Eastern Europe, vol.3, N2, 1995, p.49-52
II.4. Sztut I.I., Bezin P.B., Lomov S.V. The use of aramide filaments (SVM) in the structure of bicomponent
threads, Fibres & Textiles in Eastern Europe, vol.3, N1, 1995, p.30-32
II.5. Grishanov S.A., Lomov S.V., Harwood R.J., Cassidy, C., Farrer, C.. The simulation of the geometry of two-
component yarns, J.Textile Institute, part I: vol 88(1), N2, 1997, p.118-131;
II.6. Grishanov S.A., Lomov S.V. , Cassidy, C., Harwood R.J., The simulation of the geometry of two-component
yarns, J.Textile Institute, part II: vol.88(1), N4, 1997, p.352-372
II.7. Rudin A.E., Truevtzev N.N., Lomov S.V. Mathematical simulation of yarn formation in ring spinning, Fibres
& Textiles in Eastern Europe, vol.4, N2, 1996, p.25-28
II.8. Rudin A.E., Truevtzev N.N., Lomov S.V. Predicting ring-spun yarn tenacity, Fibres & Textiles in Eastern
Europe, vol.5, N2, 1997, p.27-30
II.9. Lomov S.V. Predicting model for needle penetration of a woven fabric, Int.J.Clothing Sci & Technology,
vol.10, N2, 1998, p.91-103
II.10. Harwood R.J., Grishanov S.A., Lomov S.V., Cassidy, T.. Modelling of two-component yarns. Part I.: The
compressibility of yarns, J.Textile Institute , vol 88(1), N4, 1997, p.373-400
II.11. Harwood R.J., Liu, J., Grishanov S.A., Lomov S.V. , Cassidy, C. Modelling of two-component yarns.
Part II: Creation of the visual images of yarns, J.Textile Institute , vol 88(1), N4, 1997, p.400-414
II.12. Belov E., Lomov S.V. Experimental investigation into loop forming (loss of stability) by turning of
threads, Fibres & Textiles in Eastern Europe, vol.5, N2, 1997, p.23-26
II.13. Gusakov, A.V. and S.V. Lomov, Parametric studies of the internal structure of 3D woven fabrics. Fibres
& Textiles in Eastern Europe. 6(2) pp. 60-63, 1998
II.14. Lomov, S.V. and A.V. Gusakov, Mathematical modelling of 3D and conventional woven fabrics.
International Journal of Clothing Science & Technology. 10(6) pp. 90-91, 1998
II.15. Lomov S.V., Cassidy C. Anysotropy of fusible interlinings mechanical properties, Int.J.Clothing Sci &
Technology, vol.11, 1999, pp.40-45
II.16. Belov, E.B., Lomov S.V., Truevtzev N.N., Bradshaw M., Harwood R., On the problem of fancy yarn
formation. Fibres & Textiles in Eastern Europe. 7(2) pp. 32-34, 1999
II.17. Lomov, S.V. Gusakov, A.V. Huysmans, G. Prodromou, A. Verpoest, I. Textile geometry preprocessor for
meso-mechanical models of woven composites, Composites Science and Technology, vol. 60, 2000, pp.2083-
2095
II.18. Lomov, S.V., Verpoest, I. Compression of woven reinforcements: a mathematical model, J.of Reinforced
Plastics and Composites, vol.19, N 16, 2000, p. 1329-1350
II.19. Lomov, S.V., Truevtzev, A.V., Cassidy, C. A predictive model for the fabric-to-yarn bending stiffness
ratio of a plain-woven set fabric, Textile Research Journal, vol.70, N12, 2000, p.1088-1096
II.20. Lomov, S.V., Huysmans, G., Verpoest, I. Hierarchy of textile structures and architecture of fabric
geometric models. Textile Research Journal, vol.71, N6, p.534-543, 2001
II.21. S.V.Lomov, G.Huysmans, Y.Luo, R.S. Parnas, A.Prodromou, I.Verpoest, F.R. Phelan, Textile
composites: Modelling strategies, Composites A, vol. 32, N 10, 1379-1394, 2001
II.22. S.V.Lomov, E.B.Belov, T.Bischoff, S.B.Ghosh, T.Truong Chi, I.Verpoest, Carbon composites based on
multi-axial multi-ply stitched preforms. Part 1: Geometry of the preform, Composites A, vol 33, N9, 2002,
1171-1183
II.23. S.V.Lomov, A.Nakai, R.S.Parnas, S. Bandyopadhyay Ghosh, I.Verpoest, Experimental and theoretical
characterisation of the geometry of flat two- and three-axial braids, Textile Research Journal, vol 72, N1,
2002, 706-712
II.24. Belov, E.B., S.V. Lomov, N.N. Truevtsev, M.S. Bradshaw, R.J. Harwood. Study of yarn snarling. Part I:
Critical parameters of snarling, Journal of the Textile Institute, Part 1: Fibre Science and Textile Technology,
93, N4, 2002, 341-365
II.25. Belov, E.B., S.V. Lomov, N.N. Truevtsev, M.S. Bradshaw, R.J. Harwood. Study of yarn snarling. Part II:
Mathematical modelling, Journal of the Textile Institute Part 1: Fibre Science and Textile Technology, 93,
N4, 2002, 366-385
II.26. J.-F.Delerue, S.V.Lomov, R.S.Parnas, I.Verpoest, M.Wevers, Pore network modelling of permeability for
textile reinforcements, Polymer Composites, 24, N3, 2003, 344-357,
Curriculum Vitae and Bibliography S. V. Lomov 12
II.27. S.V.Lomov, I.Verpoest, M.Barburski, J.Laperre, Carbon composites based on multi-axial multi-ply
stitched preforms. Part 2: KES-F characterisation of the deformability of the preforms at low loads,
Composites A, vol 34, N4, 2003, 359-370
II.28. S.V. Lomov, T. Truong Chi, I. Verpoest, T. Peeters, D. Roose, Ph. Boisse, A. Gasser, Mathematical
modelling of internal geometry and deformability of woven preforms, International Journal of Forming
Processes, vol 6, N3-4, 2003, 413-442
II.29. Lomov, S.V., Verpoest, I., Peeters, T., Roose, D., Zako, M. Nesting in textile laminates: Geometrical
modelling of the laminate, Composites Science and Technilogy, vol 63, N7, 2003, 993-1007
II.30. E.B. Belov, S.V. Lomov, I.Verpoest, T.Peters, D.Roose, R.S.Parnas, K.Hoes, H.Sol, Modelling of
permeability of textile reinforcements: Lattice Boltzmann method, Composites Science and Technology, vol
64, 2004, 1069-1080
II.31. Summerscales, J., Russell, P.M., Lomov, S.V., Verpoest, I., Parnas, R. The fractal dimension of X-ray
tomographic sections of a woven composite, Advanced Composite Letters, Vol 13, N2, 2004, 115-123
II.32. Hoes Kris, Sol Hugo, Dinescu Daniela, Lomov Stepan, Parnas Richard “Study of nesting induced scatter
of permeability values in layered reinforcement fabrics”, Composites part A, 2004, Vol 35, N12 pp.1407-1418
II.33. Lomov, S.V., M. Barburski, Tz. Stoilova, I. Verpoest, R.Akkerman, R.Loendersloot, R.H.W.ten Thije,
Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and
compression tests of the performs, Composites part A, 2005, 36, 1188-1206
II.34. Truong Chi, T., Vettori, M., Lomov, S. V., Verpoest, I. "Carbon composites based on multiaxial multiply
stitched preforms. Part 4: Mechanical properties of composites and damage observation." Composites part A,
36, 1207-1221, 2005
II.35. Lomov, S. V., Bernal, E., Ivanov, D. S., Kondratiev, S. V., Verpoest, I. "Homogenisation of a sheared
unit cell of textile composites: FEA and approximate inclusion model." Revue Européenne de Mécanique
Numérique (former Revue européenne des éléments finis), 14, N6-7, 709-728, 2005
II.36. Gorbatikh, L., Lomov, S. V., Verpoest, I. "Contribution of a partially debonded circular inhomogeneity
into the material overall elastic compliance and related problems." International Journal of Fracture, 131,
2005, 211-229
II.37. F. Desplentere, S. V. Lomov, D. L. Woerdeman, I. Verpoest, M. Wevers, A. Bogdanovich, “Micro-CT
characterization of variability in 3D textile architecture”, Composites A, 2005, vol 65, pp. 1920-1930
II.38. Verpoest, I. and S.V. Lomov Virtual textile composites software Wisetex: integration with micro-
mechanical, permeability and structural analysis. Composites Science and Technology, 2005; 65(15-16):
2563-2574
II.39. Loendersloot, R., Lomov, S.V. Akkerman, R., Verpoest, I. "Carbon composites based on multiaxial
multiply stitched preforms. Part 5: Geometry of sheared biaxial fabrics" Composites part A, 37, 2006, 103-113
II.40. Lomov, S. V., Verpoest, I. "Model of shear of woven fabric and parametric description of shear
resistance of glass woven reinforcements." Composites Science and Technology,2006; 66: 919-933
II.41. Lomov, S. V., Willems, A., Verpoest, I., Zhu, Y., Barburski, M., Stoilova, T., "Picture frame tests of
woven fabrics with full-field strain registration." Textile Research Journal, 2006, 76(3), 243-252
II.42. Koissin, V., Ruopp, A., Lomov, S.V., Verpoest, I., Witzel, V., Drechsler, K. On-surface fiber-free zones
and irregularity of piercing pattern in structurally stitched NCF preforms, Advanced Composite Letters, 2006,
15(3), 87-94
II.43. Morren, G., Gu, J., Sol, H., Verleye, B., Lomov, S.V. Stereolithography specimen to calibrate
permeability measurements for RTM flow simulations, Advanced Composite Letters, 2006, 15 (4): 119-125
II.44. Lomov, S.V., T.Mikolanda, M.Kosek, I.Verpoest, “Model of internal geometry of textile composite
reinforcements: Data structure and virtual reality implementation”, Journal of the Textile Institute, 2007,
98(1), 1-13
II.45. Kurashiki, T., Nakai, H., Hirosawa, S., Imura, M., Zako, M., Lomov, S.V., Verpoest, I. Mechanical
behaviors for textile composites by FEM based on damage mechanics, Key Engineering Materials, vol 334-
335 (Advances in Composite Materials and Structures), 2007, 257-260
II.46. Wambua, P., Vangrimde, B., Lomov, S., Verpoest, I. The response of natural fibre composites to ballistic
impact by fragment simulating projectiles, Composite Structures, 77, 2007, 232-240
II.47. Lomov, S.V., D.S. Ivanov, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai and S. Hirosawa Meso-FE
modelling of textile composites: Road map, data flow and algorithms. Composites Science and Technology,
67, 2007, 1870-1891.
Curriculum Vitae and Bibliography S. V. Lomov 13
II.48. Gorbatikh, L., Lomov, S. V., Verpoest, I. " On stress intensity factors of multiple cracks at small
distances in 2D problems" International Journal of Fracture, 143, 2007, 377-384
II.49. Rawal, A., Lomov, S.V., Ngo, T., Verpoest, I., Vankerrebrouck, J. Mechanical characterization of
through-air bonded nonwoven structure, Textile Research Journal, 2007, 77(6): 417-431
II.50. Vallons, K., Zong, M. Lomov, S.V., Verpoest, I. Carbon composites based on multi-axial multi-ply
stitched preforms. Part 6. Fatigue behaviour at low loads: stiffness degradation and damage development,
Composites A, 2007, 38: 1633-1645
II.51. Gorbatikh, L., D. Ivanov, S.V. Lomov, and I. Verpoest On modelling of damage evolution in textile
composites on meso-level via property degradation approach. Composites Part A, 2007; 38: 2433-2442
II.52. Tolosana, N., V. Koissin, S.V. Lomov, J. Stuve, A. Miravete, and J. Gonzales, Measurements of yarn
paths in 3D braids. Advanced Composite Letters, 2007. 16(5): p. 161-165.
II.53. Rawal, A., S.V. Lomov, and I. Verpoest An environmental scanning electron microscope study of a
through-air bonded structure under tensile loading. Journal of the Textile Institute, 2008; 99.3: 235-241
II.54. Kerckhofs, G., J. Schrooten, T. Van Cleynenbreugel, S.V. Lomov, and M. Wevers Validation of x-ray
microfocus computed tomography as an imaging tool for porous structures. Review of Scientific Instruments,
2008; 79: 013711
II.55. Willems, A., S.V. Lomov, I. Verpoest, and D. Vandepitte Optical strain fields in shear and tensile testing
of textile reinforcements. Composites Science and Technology, 2008, 68: 807-819
II.56. Mikhaluk, D.S., T.C. Truong, A.I. Borovkov, S.V. Lomov, and I. Verpoest, Experimental observations
and finite element modelling of damage and fracture in carbon/epoxy non-crimp fabric composites.
Engineering Fracture Mechanics, 2008. 75(9): p. 2751-2766.
II.57. Lomov, S.V., D.S. Ivanov, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai, J. Molimard and A. Vautrin,
Full field strain measurements for validation of meso-FE analysis of textile composites. Composites part A,
2008. 39: p. 1218–1231.
II.58. Lomov, S.V., P. Boisse, E. Deluycker, F. Morestin, K. Vanclooster, D. Vandepitte, I. Verpoest and A.
Willems, Full field strain measurements in textile deformability studies. Composites part A, 2008. 39: p.
1232–1244.
II.59. Cao, J., R. Akkerman, P. Boisse, J. Chen, H.S. Cheng, E.F.d. Graaf, J.L. Gorczyca, P. Harrison, G. Hivet,
J. Launay, W. Lee, L. Liu, S.V. Lomov, A. Long, E.d. Luycker, F. Morestin, J. Padvoiskis, X.Q. Peng, J.
Sherwood, T. Stoilova, X.M. Tao, I. Verpoest, J. Wiggers, A. Willems, T.X. Yu and B. Zhu, Characterization
of mechanical behavior of woven fabrics: experimental methods and benchmark results. Composites Part A,
2008. 39: p. 1037–1053.
II.60. Truong Chi, T., D.S. Ivanov, D.V. Klimshin, S.V. Lomov, and I. Verpoest Carbon composites based on
multiaxial multiply stitched preforms. Part 7: Mechanical properties and damage observations in composite
with sheared reinforcement. Composites part A, 39, 1380-1393, 2008
II.61. Lomov, S.V., D.S. Ivanov, T. Truong Chi, I. Verpoest, F. Baudry, K. Vanden Bosche, and H. Xie
Experimental methodology of study of damage initiation and development in textile composites in uniaxial
tensile test. Composites Science and Technology, 68: 2340-2349, 2008
II.62. M. Moesen, S. Lomov, J. Schrooten, H. Van Oosterwyck, I. Verpoest, Bone scaffold design based on
optimization of local strain distributions, , Journal of Biomechanics, 41 (1), 451, 2008.
II.63. Verleye, B., R. Croce, M. Griebel, M. Klitz, S.V. Lomov, G. Morren, H. Sol, I. Verpoest, and D. Roose
Permeability of Textile Reinforcements: Simulation; Influence of Shear, Nesting and Boundary Conditions;
Validation. Composites Science and Technology, 2008, 68(13): 2804-2810
II.64. Morren, G., M. Bottiglieri, S. Bossuyt, H. Sol, D. Lecompte, B. Verleye, and S.V. Lomov A reference
specimen for permeability measurements of fibrous reinforcements for RTM. Composites Part A, 40: 244-
250, 2009; DOI: 10.1016/j.compositesa.2008.11.011
II.65. Vallons, K., S.V. Lomov, and I. Verpoest Fatigue and post-fatigue behaviour of carbon/epoxy non-crimp
fabric composites. Composites Part A, 40: 251-259, 2009
II.66. Willems, A., S.V. Lomov, I. Verpoest, and D. Vandepitte, Drape-ability characterization of textile
composite reinforcements using digital image correlation. Optics and Lasers in Engineering, 47: 343-351.
2009
II.67. Ivanov, D., S. Ivanov, F. Baudry, S.V. Lomov, K. Vandenbosche, and I. Verpoest, Strain mapping
analysis of various textile composites. Optics and Lasers in Engineering, 47: 360-370. 2009
II.68. Ivanov, D.S., S.V. Lomov, I. Verpoest, and M. Wevers, Identification of damage initiation and
development in textile composite materials using acoustic emission. Journal of the Acoustic Emission, 2009.
26: p. 240-246.
II.69. Koissin, V., J. Kustermans, S.V. Lomov, I. Verpoest, H. Nakai, T. Kurashiki, K. Hamada, Y. Momoji,
and M. Zako Structurally stitched woven preforms: Experimental characterisation, geometrical modelling and
FE analysis. Plastics, Rubber and Composites: Macromolecular Engineering, 2009; 38(2): 98-105
Curriculum Vitae and Bibliography S. V. Lomov 14
II.70. Verleye, B., G. Morren, S.V. Lomov, H. Sol, I. Verpoest, and D. Roose User friendly permeability
predicting software for technical textiles. Research Journal of Textile and Apparel, 2009; 13(2): 19-27
II.71. Lomov, S.V., A. Godara, and A. Warrier Compressibility of a nanotube "forest". Composites and
Nanostructures, 2009; 1(1): 59-64 (in Russian)
II.72. Lomov, S.V., A.E. Bogdanovich, D.S. Ivanov, D. Mungalov, M. Karahan, and I. Verpoest A comparative
study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites.
Part 1: Materials, methods and principal results. Composites Part A, 40, 1134-1143, 2009 ,
10.1016/j.compositesa.2009.03.012
II.73. Ivanov, D.S., S.V. Lomov, A.E. Bogdanovich, M. Karahan, and I. Verpoest A comparative study of
tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 2:
Comprehensive experimental results. Composites Part A, 40, 1144–1157, 2009,
doi:10.1016/j.compositesa.2009.04.032
II.74. Ivanov, D.S., S.V. Lomov, F. Baudry, H. Xie, B. Van Den Broucke, and I. Verpoest Failure analysis of
triaxial braided composite. Composites Science and Technology, 69, 1372-1380, 2009
II.75. Koissin, V., J. Kustermans, S.V. Lomov, I. Verpoest, B. Van Den Broucke, and V. Witzel, Structurally
stitched NCF preforms: quasi-static response. Composites Science and Technology, 69(15-16), 2701-2710,
2009 DOI 10.1016/j.compscitech.2009.08.015
II.76. Godara, A., L. Mezzo, F. Luizi, A. Warrier, S.V. Lomov, A. Van Vuure, L. Gorbatikh, P. Moldenaers,
and I. Verpoest Influence of carbon nanotube reinforcement on the mechanical behavior of carbon fiber/epoxy
composites. Carbon, 47(12) 2914-2923, 2009 (doi:10.1016/j.carbon.2009.06.039)
II.77. Gommer, F., K. Vanderbosch, S.V. Lomov, and I. Verpoest, Error assesment in permeability
measurement using radial flow method, Advanced Composites Letters, 2009, 18(4):121-123
II.78. Vanclooster, K., S. V. Lomov and I. Verpoest. "Experimental validation of forming simulations of fabric
reinforced polymers using an unsymmetrical mould configuration." Composites Part A, 40(4), 530-539, 2009
(doi:10.1016/j.compositesa.2009.02.005 )
II.79. Verleye, B., S.V. Lomov, A.C. Long, I. Verpoest, and D. Roose Permeability prediction for the meso-
macro coupling in the simulation of the impregnation stage of Resin Transfer Moulding. Composites Part A,
41, 29-35 2010, doi:10.1016/j.compositesa.2009.06.011
II.80. Ivanov, D. S., S. V. Lomov, S. G. Ivanov and I. Verpoest . "Stress distribution in outer and inner plies of
textile laminates and novel boundary conditions for unit cell analysis." Composites Part A 41(4): 571-580,
2010
II.81. Warrier, A., A. Godara, O. Rochez, L. Mezzo, F. Luizi, L. Gorbatikh, S. V. Lomov, A. Van Vuure and I.
Verpoest (2010). "The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or
the matrix." Composites Part A 41(4): 532–538.
II.82. Gorbatikh, L., S. V. Lomov and I. Verpoest (2010). "Relation between elastic properties and stress
intensity factors for composites with rigid-line reinforcements." International Journal of Fracture 161: 205-
212.
II.83. Rawal, A., S. V. Lomov and I. Verpoest (2010). "Theory of fibre contacts and their applications to the
properties of non-woven structures." International Journal of Nonlinear Sciences and Numerical Simulation
11(1): 57-82.
II.84. Rawal, A., A. Priyadarshi, S.V. Lomov, and I. Verpoest, Tensile behaviour of thermal bonded nonwoven
structures: theoretical analysis, Journal of Materials Science, 45, 2274-2284, 2010
II.85. Gorbatikh, L., S.V. Lomov, and I. Verpoest, Original mechanism of failure initiation revealed through
modelling of naturally occurring microstructures, Journal of the Mechanics and Physics of Solids, 2010, 58:
735–750.
II.86. Godara, A., L. Gorbatikh, G. Kalinka, A. Warrier, O. Rochez, L. Mezzo, F. Luizi, A. Van Vuure, S.V.
Lomov, and I. Verpoest, Interfacial shear strength of a glass fibre/epoxy bonding in composites modified with
carbon nanotubes, Composites Science and Technology, 2010, 70, 1346–1352,
(DOI:10.1016/j.compscitech.2010.04.010)
II.87. Lomov, S.V., V. Koissin, M. Karahan, A. Godara, L. Gorbatikh, and I. Verpoest, Compressibility of
CNT-grafted fibrous reinforcements: A theory. International Journal of Material Forming, 2010. 3: p. 627–
630.
II.88. Karahan, M., S.V. Lomov, A.E. Bogdanovich, D. Mungalov, and I. Verpoest, Internal geometry
evaluation of non-crimp 3D orthogonal woven carbon fabric composite. Composites Part A, 2010. 41: p.
1301-1311.
II.89. Vallons, K., A. Behaeghe, S.V. Lomov, and I. Verpoest, Impact and post-impact properties of a carbon
fibre non-crimp fabric and a twill weave composite. Composites Part a-Applied Science and Manufacturing,
2010, 41(8): p. 1019-1026.
Curriculum Vitae and Bibliography S. V. Lomov 15
II.90. Carvelli, V., V.N. Tomaselli, S.V. Lomov, I. Verpoest, V. Witzel, and B. Van Den Broucke, Fatigue and
post-fatigue tensile behaviour of non-crimp stitched and unstitched carbon/epoxy composites, Composites
Science and Technology, 2010, 70, 2216-2224
II.91. Rawal, A., A. Priyadarshi, N. Kumar, S.V. Lomov, and I. Verpoest, Tensile behaviour of thermal bonded
nonwoven structures: comparison with experimental results. Journal of Materials Science, 2010. 45: p. 6643–
6652.
II.92. Lomov, S.V., D.S. Ivanov, K. Vallons, I. Verpoest, and T.C. Truong, Damage behaviour of NCF
carbon/epoxy laminates under tension. Research Journal of Textile and Apparel, 2010. 14(3): p. 47-54.
II.93. Van Den Broucke, B., N. Hamila, P. Middendorf, S.V. Lomov, P. Boisse, and I. Verpoest, Determination
of the mechanical properties of textile-reinforced composites taking into account textile forming parameters.
International Journal of Material Forming, 2010. 3(Suppl 2): p. S1351-S1361.
II.94. Valizade, M., S.V. Lomov, S.A.H. Ravandi, M. Salimi, and S.Z. Rad, Finite element simulation of yarn
pull-out test for plain woven fabrics. Textile Research Journal, 2010. 80(10): p. 892-903.
II.95. Daggumati, S., I. De Baere, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, and I. Verpoest, Local
damage in a 5-harness satin weave composite under static tension: Part I - Experimental analysis, Composites
Science and Technology, 2010, 70(13): 1926-1933.
II.96. Daggumati, S., W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, and I. Verpoest, Local damage in a 5-
harness satin weave composite under static tension: Part II - Meso-FE modelling, Composites Science and
Technology, 2010, 70(13): 1934-1941.
II.97. Carvelli, V., G. Gramellini, S. V. Lomov, A. E. Bogdanovich, D. Mungalov and I. Verpoest, "Fatigue
behaviour of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass reinforced composites."
Composites Science and Technology, 2010, 70(14): 2068-2076 (doi:10.1016/j.compscitech.2010.08.002)
II.98. Taketa, I., J. Ustarroz, L. Gorbatikh, S.V. Lomov, and I. Verpoest, Interply hybrid composites with
carbon fiber reinforced polypropylene and self-reinforced polypropylene, Composites Part A, 2010, 41:927-
932
II.99. Lomov, S. V., G. Perie, D. S. Ivanov, I. Verpoest and D. Marsal (2011). "Modelling 3D fabrics and 3D
reinforced composites: Challenges and solutions." Textile Research Journal, 81(1), p.26-41
II.100. Lomov, S.V., L. Gorbatikh, Z. Kotanjac, V. Koissin, M. Houlle, O. Rochez, M. Karahan, L. Mezzo, and
I. Verpoest, Compressibility of carbon woven fabric with carbon nanotubes grown on the fibres, Composites
Science and Technology, 2011, 71(3): 315–325 (doi:10.1016/j.compscitech.2010.11.024).
II.101. Lomov, S. V., M. Moesen, R. Stalmans, G. Trzcinski, J. Van Humbeeck and I. Verpoest (2011). "Finite
element modelling of SMA textiles: superelastic behaviour." Journal of the Textile Institute, 102(3): 232-247
(DOI: 10.1080/00405001003696464)
II.102. Lomov, S.V., L. Gorbatikh, and I. Verpoest, A model for the compression of a random assembly of
carbon nanotubes, Carbon, 49: 2079-2091, 2011 (doi: 10.1016/j.carbon.2011.01.043)
II.103. Prodromou, A., S. V. Lomov and I. Verpoest. "The method of cells and the mechanical properties of
textile composites." Composite Structures, 2011, 93: 1290-1299
II.104. Arbter, R., C. Binetruy, L. Bizet, J. Bréard, J.M. Beraud, S. Comas-Cardona, C. Demaria, A. Endruweit,
P. Ermanni, F. Gommer, S. Hasanovic, F. Klunker, S. Lavanchy, B. Laine, A. Long, S.V. Lomov, M. V., G.
Morren, P. Henrat, E. Ruiz, H. Sol, F. Trochu, B. Verleye, M. Wietgrefe, W. Wu, and G. Ziegmann,
Experimental determination of the permeability of textiles: A benchmark exercise. Composites Part A, 2011,
42(9): 1157-1168.
II.105. Lomov SV, Gorbatikh L, Verpoest I. Compression behaviour of a fibre bundle with grafted carbon
nanotubes. Carbon, 2011, 49: 4458-4465.
II.106. De Greef N, Gorbatikh L, Godara A, Mezzo L, Lomov SV, Verpoest I. The effect of carbon nanotubes on
the damage development in carbon fiber/epoxy composites. Carbon 2011, 49: 4650-4664
II.107. Daggumati, S., E. Voet, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, and I. Verpoest, Local strain
in a 5-harness satin weave composite under static tension: Part I - Experimental analysis. Composites
Science and Technology. 2011, 71(8): p. 1171-1179.
II.108. Daggumati, S., W. Van Paepegem, J. Degrieck, T. Praet, B. Verhegghe, J. Xu, S.V. Lomov, and I.
Verpoest, Local strain in a 5-harness satin weave composite under static tension: Part II - Meso-FE analysis.
Composites Science and Technology. 2011, 71(9): p. 1217-1224.
II.109. De Greef, N., L. Gorbatikh, S.V. Lomov, and I. Verpoest Damage development in woven carbon
fiber/epoxy composites modified with carbon nanotubes under tension in the bias direction. Composites Part
A, 2011, 42: 1835-1644
II.110. Lomov, S.V., L. Gorbatikh, M. Houlle, Z. Kotanjac, V. Koissin, K. Vallons, and I. Verpoest Compression
resistance and hysteresis of carbon fibre tows with grown carbon nanotubes/nanofibres. Composites Science
and Technology, 2011, 71: 1746-1753
Curriculum Vitae and Bibliography S. V. Lomov 16
II.111. Karahan, M., S.V. Lomov, A.E. Bogdanovich, and I. Verpoest Fatigue tensile behavior of carbon/epoxy
composite reinforced with non-crimp 3D orthogonal woven fabric. Composites Science and Technology,
2011, 71: 1961-1972
II.112. Ivanov, D.S., S.G. Ivanov, S.V. Lomov, and I. Verpoest, Unit cell modelling of textile laminates with
arbitrary inter-ply shifts. Composites Science and Technology, 2011, 72(1): 14-20
II.113. Vallons, K., I. Duque, S.V. Lomov, and I. Verpoest, Loading direction dependence of the tensile stiffness,
strength and fatigue life of biaxial carbon/epoxy NCF composites. Composites Part a-Applied Science and
Manufacturing, 2011. 42: p. 16-21.
II.114. Hanot, F., K. Vanclooster, and S.V. Lomov, Compression behaviuor of steel fibre knitted fabrics. Key
Engineering Materials, 2012. 504-506: p. 273-276.
II.115. Jain, A., I. Verpoest, M. Hack, S.V. Lomov, L. Adam, and W. Van Paepegem, Fatigue Life Simulation on
fiber reinforced composites –overview and methods of analysis for the automotive industry, in SAE Technical
paper 2012-01-0730. 2012. p. s.p.
II.116. Carvelli, V., J. Pazmino, S.V. Lomov, and I. Verpoest, Deformability of a non-crimp 3D orthogonal
weave E-glass composite reinforcement. Composites Science and Technology, 2012, 73: 9-18
http://dx.doi.org/10.1016/j.compscitech.2012.09.004
II.117. Olave, M., A. Vanaerschot, S.V. Lomov, and D. Vandepitte, Internal geometry variability of two woven
composites and related variability of the stiffness. Polymer Composites, 2012, 33: 1335-1350
II.118. Alam, K., G. Kerckhofs, A.V. Mitrofanov, S.V. Lomov, M. Wevers, and V. Silberschidt, On-line analysis
of cracking in cortical bone under wedge penetration. Proceedings of the Institution of Mechanical Engineers,
Part H, Journal of Engineering in Medicine, 2012, 226: 709-716
II.119. Vanaerschot, A., B.N. Cox, M. Blacklock, G. Kerckhofs, M. Wevers, S.V. Lomov, and D. Vandepitte,
Stochastic framework for quantifying the geometrical variability of laminated textile composites using micro-
computed tomography. Composites Part A, 2013, 44: 122-131
II.120. Swolfs, Y., L. Gorbatikh, V. Romanov, S. Orlova, S.V. Lomov, and I. Verpoest, Stress concentrations in
an impregnated fibre bundle with random fibre packing. Composites Science and Technology, 2013, 74: 113-
120 (http://dx.doi.org/10.1016/j.compscitech.2012.10.013)
II.121. Daggumati, S., I. De Baere, W. Van Paepegem, J. Degrieck, J. Xu, S.V. Lomov, and I. Verpoest, Fatigue
and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre reinforced composite.
Composites Science and Technology, 2013. 74: p. 20-27.
II.122. Barburski M, Lomov SV, Lanckmans F, De Ridder F, Verpoest I. Experimental study of steel and glass
knitted fabrics thickness under pre-strain and shear. Key Engineering Materials. 2013;554-557:385-90.
II.123. Bogdanovich AE, Karahan M, Lomov SV, Verpoest I. Quasi-static tensile behavior and progressive
damage in carbon/epoxy composite reinforced with 3D non-crimp orthogonal woven fabric. Mech Mater.
2013, 62: 14-31. http://dx.doi.org/10.1016/j.mechmat.2013.03.005
II.124. Vallons, K., G. Adolphs, M. Lucas, S.V. Lomov, and I. Verpoest, Quasi-ud glass fibre NCF composites
for wind energy applications: a review of requirements and existing fatigue data for blade materials.
Mechanics and Industry, 2013, 14: 175-185
II.125. Jain, A., S.V. Lomov, Y. Abdin, I. Verpoest, and W. Van Paepegem, Pseudo-grain discretization and full
Mori Tanaka formulation for random heterogeneous media: Predictive abilities for stresses in individual
inclusions and the matrix. Composites Science and Technology, 2013. 87: 86-93.
II.126. Romanov, V.S., S.V. Lomov, Y. Swolfs, S. Orlova, L. Gorbatikh, and I. Verpoest, Statistical analysis of
real and simulated fibre arrangements in unidirectional composites. Composites Science and Technology,
2013, 87: 126-134.
II.127. Vanaerschot, A., B. N. Cox, S. V. Lomov and D. Vandepitte, "Stochastic multi-scale modelling of textile
composites based on internal geometry variability." Computers and Structures, 2013, 55-64
II.128. Carvelli, V., J. Pazmino, S.V. Lomov, A.E. Bogdanovich, D. Mungalov, and I. Verpoest, Quasi-static
and fatigue tensile behavior of a 3d rotary braided carbon/epoxy composite. Journal of Composite Materials,
2013, 47, 3188-3202
II.129. Vallons, K., G. Adolphs, P. Lukas, S.V. Lomov, and I. Verpoest, The influence of the stitching pattern on
the internal geometry, quasi-static and fatigue mechanical properties of glass fibre non-crimp fabric
composites. Composites Part A, 2014. 56: p. 272-279.
II.130. Tabatabaei, S.A., S.V. Lomov, and I. Verpoest, Assessment of embedded element technique in meso-FE
modelling of fibre reinforced composites. Composite Structures, 2014. 107: p. 436-446.
II.131. Lomov, S.V., S. Wicks, L. Gorbatikh, I. Verpoest, and B.L. Wardle, Compressibility of nanofiber-grafted
alumina fabric and yarns: Aligned carbon nanotube forests. Composites Science and Technology, 2014, 90:
57-66
II.132. Siegfried, M., C. Tola, M. Claes, S.V. Lomov, I. Verpoest, and L. Gorbatikh, Impact and residual after
impact properties of carbon fiber/epoxy composites modified with carbon nanotubes. Composite Structures,
2014, 111: 488-469 (http://dx.doi.org/10.1016/j.compstruct.2014.01.035)
Curriculum Vitae and Bibliography S. V. Lomov 17
II.133. Lomov, S.V., I. Verpoest, J. Cichosz, C. Hahn, D.S. Ivanov, and B. Verleye, Meso-level textile
composites simulations: open data exchange and scripting. Journal of Composite Materials, 2014, 48: 621-
637 (DOI: 10.1177/0021998313476327).
II.134. Pazmino, J., V. Carvelli, and S.V. Lomov, Formability of a non-crimp 3D orthogonal weave E-glass
composite reinforcement. Composites Part A, 2014, 61: 76-83
(http://dx.doi.org/10.1016/j.compositesa.2014.02.004)
II.135. Harjkova, G., M. Barburski, S.V. Lomov, O. Kononova, and I. Verpoest, Weft knitted loop geometry
measured with X-ray micro-computer tomography. Textile Research Journal, 2014, 85: 500-512
(http://trj.sagepub.com/content/early/2013/12/06/0040517513503730 ).
II.136. Shishkina O, Lomov SV, Verpoest I, Gorbatikh L. Structure-property relations for balsa wood as a
function of density: modelling approach. Arch Appl Mech. 2014, 84:789-805 (doi: 10.1007/s00419-014-0833-
2)
II.137. Vanleeuw, B., V. Carvelli, S.V. Lomov, M. Barburski, and A.W. Van Vuure, Deformability of a flax
reinforcement for composite materials. Key Engineering Materials, 2014. 611-612: p. 257-264.
II.138. Verpoest, I., S. Lomov, Y. Swolfs, P. Jacquet, V. Michaud, J.A. Manson, J. Hobdell, P. Hine, P.
Marquette, H. Herten, and H. Vasiliadis, Advanced materials enabling high volume road transport applications
of lightweight structural composite parts. SAMPE Journal, 2014. 50(3): p. 30-37.
II.139. Aravand, M.A., S.V. Lomov, I. Verpoest, and L. Gorbatikh, Evolution of carbon nanotube dispersion in
preparation of epoxy-based composites: from a masterbatch to a nanocomposite. eXPRESS Polymer Letters,
2014, 8: 596-608 (DOI: 10.3144/expresspolymlett.2014.63)
II.140. Vernet, N., E. Ruiz, S. Advani, J. B. Alms, M. Aubert, M. Barburski, B. Barari, J. M. Beraud, D. C. Berg,
N. Correia, M. Danzi, T. Delavière, M. Dickert, C. Di Fratta, A. Endruweit, P. Ermanni, G. Francucci, J. A.
Garcia, A. George, C. Hahn, F. Klunker, S. V. Lomov, A. Long, B. Louis, J. Maldonado, R. Meier, V.
Michaud, H. Perrin, K. Pillai, E. Rodriguez, F. Trochu, S. Verheyden, M. Wietgrefe, W. Xiong, S. Zaremba
and G. Ziegmann Experimental determination of the permeability of engineering textiles: Benchmark II.
Composites Part A: Applied Science and Manufacturing 61: 172-184, 2014 (DOI:
10.1016/j.compositesa.2014.02.010)
II.141. Li, L., S.V. Lomov, X. Yan, and V. Carvelli, Cluster analysis of acoustic emission signals for 2D and 3D
woven glass/epoxy composites. Composite Structures, 2014, 116: 286-289 (DOI
10.1016/j.compstruct.2014.05.023)
II.142. Lomov, S.V., M. Karahan, A.E. Bogdanovich, and I. Verpoest, Monitoring of acoustic emission damage
during tensile loading of 3D woven carbon/epoxy composites. Textile Research Journal, 2014 84:1373-1384
(doi: 10.1177/0040517513519510)
II.143. Ivanov, D.S. and S.V. Lomov, Compaction behaviour of dense sheared woven preforms: experimental
observations and analytical prediction. Composites Part A, 64: 167-176, 2014
II.144. Romanov, V., S.V. Lomov, I. Verpoest, and L. Gorbatikh, Can carbon nanotubes grown on fibers
fundamentally change stress distribution in a composite? Composites Part A, 63: 32-34 2014 (DOI:
10.1016/j.compositesa.2014.03.021)
II.145. Vanaerschot, A., B.N. Cox, S.V. Lomov, and D. Vandepitte, Simulation of the cross-correlated positions
of in-plane tow centroids in textile composites based on experimental data. Composite Structures, 2014,
116:75-83 (DOI: 10.1016/j.compstruct.2014.05.017)
II.146. Pazmino, J., V. Carvelli, and S.V. Lomov, Micro-CT analysis of the internal deformed geometry of a
non-crimp 3D orthogonal weave e-glass composite reinforcement. Composites Part B, 2014, 65, 146-157
(http://dx.doi.org/10.1016/j.compositesb.2013.11.024). II.147. Abdin, Y., S.V. Lomov, A. Jain, H. Van Lenthe, and I. Verpoest, Geometrical characterization & micro-
structural modelling of short steel fiber composites. Composites Part A, 2014, 67, 171-180
II.148. Sachs, U., Akkerman, R., Fetfatsidis, K., Vidal-Salle, E., Schumacher, J., Ziegmann, G., Allaoui, S.,
Hivet, G., Maron, B., Vanclooster, K., and Lomov, S. V., 2014. Characterization of the dynamic friction of
woven fabrics: Experimental methods and benchmark results. Composites Part A, 67: 289-298
II.149. J. Pazmino, V. Carvelli, S. V. Lomov, B. Van Mieghem, and P. Lava, "3D digital image correlation
measurements during shaping of a non-crimp 3d orthogonal woven e-glass reinforcement," International
Journal of Materials Forming, vol. 7, pp. 439–446, 2014 (DOI 10.1007/s12289-013-1139-6).
II.150. Xu, J., S. V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, J. Degriek and M. Olave (2014). A
progressive damage model of textile composites on meso-scale using finite element method: Static damage
analysis. Journal of Composite Materials 48: 3091-3109. (DOI: 10.1177/0021998313507008).
II.151. Kersani, M., S. V. Lomov, A. W. Van Vuure, A. Bouabdallah and I. Verpoest (2015). Damage in
flax/epoxy quasi unidirectional woven laminates under quasi-static tension. Journal of Composite Materials
49: 403-413. DOI: 10.1177/0021998313519282)
Curriculum Vitae and Bibliography S. V. Lomov 18
II.152. Romanov, V., S. V. Lomov, I. Verpoest and L. Gorbatikh (2015). Carbon nanotubes to mitigate stress
concentrations at micro-scale: modelling investigation for composites. Carbon 82: 184-194.
(DOI: 10.1016/j.carbon.2014.10.061)
II.153. Straumit, I., S. V. Lomov and M. Wevers. Quantification of the internal structure and automatic
generation of voxel models of textile composites from X-ray computed tomography data. Composites Part A
69: 150-158, 2015 (DOI doi:10.1016/j.compositesa.2014.11.016)
II.154. Li, L., S.V. Lomov, and X. Yan, Correlation of acoustic emission with optically observed damage in a
glass/epoxy woven laminate under tensile loading. Composite Structures, 2015, 123, 45-53 (DOI
10.1016/j.compstruct.2014.12.029).
II.155. Aravand, M.A., S.V. Lomov, and L. Gorbatikh, Morphology and fracture behavior of POM modified
epoxy matrices and their carbon fiber composites. Composites Science and Technology, 2015, 110, 8-16 (doi:
10.1016/j.compscitech.2015.01.017)
II.156. Vanleeuw, B., V. Carvelli, M. Barburski, S.V. Lomov, and A. Van Vuure, Quasi-unidirectional flax
composite reinforcement: deformability and complex shape forming. Composites Science and Technology,
2015, 110, 76-86 (DOI: 10.1016/j.compscitech.2015.01.024)
II.157. Xu, J., S.V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, and J. Degriek, A progressive fatigue
damage model of textile composites on meso-scale using finite element method. Computers & Structures,
2015, 152: 96-112 (DOI: 10.1016/j.compstruc.2015.02.005)
II.158. Pazmino, J., S. Mathieu, V. Carvelli, P. Boisse, and S.V. Lomov, Numerical modelling of forming of a
non-crimp 3d orthogonal weave e-glass composite reinforcement. Composites Part A, 2015, 72: 207-218
(DOI: /10.1016/j.compositesa.2015.02.013)
II.159. Tabatabaei, S.A. and S.V. Lomov, Eliminating the volume redundancy of embedded elements and yarn
interpenetrations in meso- finite element modelling of textile composites. Computers & Structures, 2015, 152:
142-154 (DOI 10.1016/j.compstruc.2015.02.014)
II.160. Vanclooster, K., M. Barburski, S.V. Lomov, I. Verpoest, F. Deridder, and F. Lanckmans, Experimental
characterisation of steel fibre knitted fabrics deformability. Experimental Techniques, 2015, 39: 16-22
(doi:10.1111/ext.12009)
II.161. Barburski, M., I. Straumit, X. Zhang, M. Wevers, and S.V. Lomov, Micro-CT analysis of internal
structure of sheared textile composite reinforcement. Composites Part A, 2015, 73: 45-54 (doi:
10.1016/j.compositesa.2015.03.008)
II.162. Barburski, M., I. Straumit, and S.V. Lomov, Internal structure of the sheared textile composite
reinforcement: analysis using X-ray tomography. Key Engineering Materials, 2015. 651-653: 325-330.
II.163. Olave, M., I. Vara, H. Husabiaga, L. Aretxabaleta, S.V. Lomov, and D. Vandepitte, Nesting effect on the
mode I fracture toughness of woven laminates. Composites Part A, 2015, 74: 166-173
(doi:10.1016/j.compositesa.2015.03.017)
II.164. Olave, M., I. Vara, H. Husabiaga, L. Aretxabaleta, S.V. Lomov, and D. Vandepitte, Nesting effect on the
mode II fracture toughness of woven laminates. Composites Part A, 2015, 74: 174-181
(doi:10.1016/j.compositesa.2015.03.020)
II.165. Jain, A., Y. Abdin, W. Van Paepegem, I. Verpoest, and S.V. Lomov, Effective anisotropic stiffness of
inclusions with debonded interface for Eshelby-based models. Composite Structures, 2015, 131: 692-706 (doi
10.1016/j.compstruct.2015.06.007)
II.166. Romanov, V., S.V. Lomov, I. Verpoest, and L. Gorbatikh, Inter-fiber stresses in composites with carbon
nanotube grafted and coated fibers. Composites Science and Technology, 2015, 114: 79-86 (DOI:
10.1016/j.compscitech.2015.04.013)
II.167. Sabuncuoglu, B., S. Orlova, L. Gorbatikh, S.V. Lomov, and I. Verpoest, Micro-scale finite element
analysis of stress concentrations in steel fiber composites under transverse loading. Journal of Composite
Materials, 2014 in print, doi: 10.1177/0021998314528826.
II.168. Barburski, M., S.V. Lomov, F. Lanckmans, and F. de Ridder, Steel fibre knitted fabric for automotive
glass forming: variations of the fabric thickness on the mould and glass optical quality. Journal of Industrial
Textiles, 2014 in print, DOI: 10.1177/1528083714538685
II.169. Wittevrongel, L., Lava, P., Lomov, S. V., and Debruyne, D., 2015 in print. A self adaptive global digital
image correlation algorithm. Experimental mechanics, DOI 10.1007/s11340-014-9946-3
II.170. Fedulov, B.N., F.K. Antonov, A.A. Safonov, A.E. Ushakov, and S.V. Lomov, Influence of fibre
misalignment and voids on composite laminate strength. Journal of Composite Materials, 2014 in print (DOI:
10.1177/0021998314557533)
II.171. M. Barburski and S. V. Lomov, "Influence of oxidation on steel fibre yarn and knitted fabric properties,"
Journal of Industrial Textiles, 2015 in print (DOI: 10.1177/1528083714564634)
II.172. Shishkina, O., S. V. Lomov, et al. (2015 in print). "Modeling of elastic properties of cell-wall material in
nanoclayreinforced foams." Journal of Cellular Plastics (DOI: 10.1177/0021955X14568654)
Curriculum Vitae and Bibliography S. V. Lomov 19
II.173. Swery, E.E., R. Meier, S.V. Lomov, and P. Kelly, Predicting Permeability Based on Flow Simulations
and Textile Modelling Techniques; Comparison with Experimental Values and Verification of flowtex Solver
using Ansys CFX. Journal of Composite Materials, 2015 in print (DOI: 10.1177/0021998315579927)
II.174. Samal, S., P.T. Nhan, I. Petrikova, B. Marvalova, K. Vallons, and S.V. Lomov, Correlation of
microstructure and mechanical properties of various fabric reinforced geo-polymer composites after exposure
to elevated temperature. Ceramics International, 2015 in print.
II.175. Li, L., Y. Swolfs, I. Straumit, X. Yan, and S.V. Lomov, Cluster analysis of acoustic emission signals for
2D and 3D woven carbon fiber/epoxy composites. Journal of Composite Materials, 2015 in print.
II.176. Tabatabaei, S.A., Y. Swolfs, H. Wu, and S.V. Lomov, Full-field strain measurements and meso-FE
modelling of hybrid carbon/self-reinforced polypropylene. Composite Structures, 2015 in print.
II.177. Romanov, V.S., S.V. Lomov, I. Verpoest, and L. Gorbatikh, Stress magnification due to carbon nanotube
agglomeration in composites. Composite Structures, 2015 in print.
II.178. Wittevrongel, L., P. Lava, S.V. Lomov, and D. Debruyne, Cn continuity in Digital Image Correlation:
Implementation and validation of C-1, C0 and C1 algorithms. Strain, 2015 in print.
II.179. Vallons, K., R. Drozdzak, M. Charret, S.V. Lomov, and I. Verpoest, Assessment of the mechanical
behaviour of glass fibre composites with a tough polydicyclopentadiene (PDCPD) matrix. Composites Part A,
2015 in print.
II.180. Lomov, S.V. and K. Molnár, Compressibility of carbon fabrics with needleless electrospun PAN
nanofibrous interleaves. eXPRESS Polymer Letters, 2015 in print.
II.181. Jain, A., Y. Abdin, W. Van Paepegem, I. Verpoest, and S.V. Lomov, Non-symmetric stiffness tensor
prediction by the Mori-Tanaka scheme - Comments on the article "Effective anisotropic stiffness of inclusions
with debonded interface for Eshelby-based models, Comp. Structures 131 (2015) 692-706". Composite
Structures, 2015 in print.
II.182. Xu, J., S.V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, and J. Degrieck, A comparative study
of twill weave reinforced composites under tension-tension fatigue loading: Experiments and meso-modelling.
Composite Structures, 2015 in print.
II.183.
III. Other scientific articles
III.1. Lomov, S.V., Kobzar, A.S., Kubelskyi, V.R., Experimantal investigation of the resistance to the impact
of fabrics made with high-modulus fibres, Dynamical strength and crack resistance of constructional
materials, Kiev, 1988, 123-129 (in Russian)
III.2. Lomov, S.V. Changing of the type of deformation of a titanium alloy when the woven reinforcement is
present, Dynamical strength and crack resistance of constructional materials, Kiev, 1988, 130-133 (in Russian)
III.3. Lomov S.V. Modelling of a yarn shape in a woven fabric with splines, Izvestia Vuzov. Technologia
Textilnoy Promishlennosty, 1990, N6, p.49-52 (in Russian)
III.4. Lomov S.V., Mokeev M.N. Computing the strength of a woven bent tube under internal pressure,
Technologia Textilnoy Promishlennosty, 1991, N4, p.45-50 (in Russian)
III.5. Lomov S.V., Primachenko B.M. Mathematical modelling of two-layered woven fabric under tension,
Technologia Textilnoy Promishlennosty, 1992, N1, p.49-53 (in Russian)
III.6. Primachenko B.M., Lomov S.V. et al. Design of dryer nets, Textilnaya Promishlennost, 1992, N6, p.38-
41 (in Russian)
III.7. Lomov S.V., Rozkov N.N., Shtut I.I et al. Automated information system for spinning-weaving factory
laboratory, Textilnaya Promishlennost, 1992, N7, p.14-15 (in Russian)
III.8. Lomov S.V. Automatized computation of woven structures, Technologia Textilnoy Promishlennosty,
1993 part I: N1, p.40-45, (in Russian)
III.9. Lomov S.V. Automatized computation of woven structures, Technologia Textilnoy Promishlennosty,
1993 part II: N2, p.47-50, (in Russian)
III.10. Lomov S.V. Automatized computation of woven structures, Technologia Textilnoy Promishlennosty,
1993 part III: N3, pp. 42-45 (in Russian)
III.11. Lomov S.V., Gusakov A.V. Coding of layered-carcassed woven structures, Technologia Textilnoy
Promishlennosty, 1993, N4, p.36-38 (in Russian)
III.12. Lomov S.V., Truevtzev A.V. Computing an evaluation of bending rigidity ratio of a woven fabric and a
yarn, Technologia Textilnoy Promishlennosty, 1994, N3, p.9-11 (in Russian)
III.13. Lomov S.V. Mathematical modelling of high-velocity impact on woven pile, Technologia Textilnoy
Promishlennosty, 1994, N4, p.9-11 (in Russian)
Curriculum Vitae and Bibliography S. V. Lomov 20
III.14. Primachenko, B.M., Lomov, S.V., Juraev, A.G. Development and investigation of new multi-layered
woven fabrics with the high density, Development and investigation of new multi-layered woven fabrics with
the high density, St.Petersburg State University of Technology and Design, 1994, p. 145-152
III.15. Lomov S.V. Resistance of woven fabrics to local deformation: computational prediction, Vlakna a Textil,
vol.2, N2, 1995, p.49-54
III.16. Lomov S.V. Mathematical modelling of protective properties of woven pile, Technizne Wyroby
Wlokiennicze, vol.3, N4, 1995, p.114-117 (in Polish)
III.17. Lomov S.V. Resistance of woven targets to a high-velocity impact, Chimicheskie Volokna, 1995, N3,
p.34-36 (in Russian; the journal is translated into English in USA: Fibre Chemistry)
III.18. Shtut I.I., Bezin P.B., Lomov S.V. Optimizing the fibrous content and properties of blended SVM-cotton
yarns, Chimicheskie Volokna, 1995, N4, p.31-33 (in Russian; the journal is translated into English: Fibre
Chemistry)
III.19. Lomow S.W. Mathematical modelling of an oblique ballistic impact, Technizne Wyroby Wlokiennicze,
vol.5, N4, 1997, p.105-114, (in Polish and in English)
III.20. Lomow S.W., Dymovsky, A.S. Modelowanie wzajennego oddzialywania przedmiotu udarzajaego z duza
predkoscia i przegrody metalowej, Technizne Wyroby Wlokiennicze, vol.5, N3, 1997, p.82, (in Polish)
III.21. Lomov S.V. Soldier equipment "with a human face", Zaschita i bezopasnost, 1997, N3, p.16-17 (in
Russian)
III.22. Lomov S.V. Invisible fighter, Zaschita i bezopasnost, 1997, N3, p.22-23 (in Russian)
III.23. Kovaleva N.A., Arhalova V.V. Lomov S.V. et al. Research of the structure and mechanical properties of
bi-component reinforced spun yarn, Technologia Textilnoy Promishlennosty, 1997, N6 (in Russian)
III.24. Lomov S.V., Truevtzev, N.N. Bachelor curicculum "Textile Technology" in SPbSUTD, TEMPUS NT-
JEP-102326. Materials of the 1st project year, St.-Petersburg State University of Technology and Design,
1997, p. 23-31
III.25. Lomov S.V., Gusakov A.V. Mathematical prediction of porosity of 3D woven fabrics, Chimicheskie
Volokna, 1999, N1 (in Russian; the journal is translated into English: Fibre Chemistry)
III.26. Belov, E.B., S.V. Lomov, N.N. Truevtzev, M. Bradshaw, and R.J. Harwood, Measurement of the thread
resistance to twisting and the critical snarl formation parameters. Chimicheskie Volokna (Fibre Chemistry, vol
31, N5 380-386), 1999(3): p. 37-41.
III.27. Belov, E.B., Lomov S.V., Truevtzev N.N., Harwood R. Mathematical modelling of the process of looped
yarn forming, Technologia Textilnoy Promishlennosty, 2000, N2, p30-33 (in Russian)
III.28. Lomov, S.V., Gusakov A.V. Mathematical modelling of the structure of 3D woven fabrics, Technologia
Textilnoy Promishlennosty, 1999, N1, p.50-53, N3, p.47-49, N4, p.47-49 (in Russian)
III.29. Legezina, G.I., Lomov, S.V., Truevtzev, N.N. Mechanical properties of linen yarns and fabrics,
Technologia Textilnoy Promishlennosty, 1999, N5. p.13-16 (in Russian)
III.30. S.V.Lomov, I.Verpoest. WiseTex – Virtual Textile software, Vlakna a Textil, 2001, N2, p.135-140
III.31. Lomov, S.V., Verpoest, I., WiseTex-Virtual textile software, Unitex, No. 5, 2001, pp. 45-47
III.32. N.G. Koltysheva, S.V. Lomov, N.N. Truevtzev, Abrasion resistance of cotton/flax fabrics: 3d computer
simulations of fabric wear geometry, AUTEX Research Journal, Vol. 4, No4, 2004, 182-186
III.33. Paul Wambua, Marc Pirlot, Stepan Lomov and Ignaas Verpoest, Protection against secondary
fragmentation from AP mines based on natural fibre composites, Journal of Mine Action, vol 9-1, 2005, 95-98
III.34. S.V.Lomov, I.Verpoest, WiseTex: Virtual reality and real-world prediction of structure and properties of
textile polymer composites, Tehnicheskiy Tekstil, N6, 2006, 37-41 (in Russian)
III.35. Lomov, S. V. and N. N. Truevtsev (2007). "Finite element modelling of textile and textile composites -
The review of 22nd BEM-FEM International conference in St-Petersburg." Vestnik SPbGUTD(14): 57-62 (in
Russian)
III.36. Gries, T. and S.V. Lomov, Exploiting the potential of textile reinforced composites, JEC Composites
Magazine, 2010(58): 20.
IV. International proceedings, fully published
IV.1. Lomov S.V. Deformation of a woven panel under a high-velocity impact, New textile technologes
(PROGRESS-90), Ivanovo, 1990, p.151 (in Russian)
IV.2. Lomov, S.V. Automative computation of woven structures, Theory and practice of a non-shuttle weaving,
Moscow State Textile Academy, 1992, p. 22 (in Russian)
Curriculum Vitae and Bibliography S. V. Lomov 21
IV.3. Lomov, S.V. Automative computation of woven structures, Modern tendencies in textile technology,
Ivanovo Textile Academy, 1993, 69-70 (in Russian)
IV.4. Lomov, S.V., Rozkov, N.N, Shtut, I.I. Information system for the spinning-weaving mill laboratore,
Modern tendencies in textile technology, Ivanovo Textile Academy, 1993, 44-45 (in Russian)
IV.5. Lomov S.V., Gusakov A.V., Cassidy C. 3D fabrics: technology, structure properties and mathematical
simulation, EUROMECH-334, Textile Composites and Textile Structures, Lyon, 1995, p.187-200
IV.6. Lomov S.V. Mathematical simulation of the high-velocity impact on woven targets, EUROMECH-334,
Textile Composites and Textile Structures, Lyon, 1995, p.282-294
IV.7. Lomov S.V. Modelling of the high-velocity impact on textile woven targets, Clothing and Personal
Equipment for the Combat Soldier 2000, Colchester: Defence Clothing and Textile Agency, 1995, [s.p.]
IV.8. Lomov S.V. Oblique high-velocity impact on a textile woven target: mathematical simulation, Personal
Armour Systems Symposium (PASS-96), Colchester: Defence Clothing and Textile Agency, 1996, p.154-175
IV.9. Mogilny A.N., Gusakov A.V., Lomov S.V. et al. Multi-layered woven fabrics: design and structures or
technical applications, ArchTech'97 - Textiles - Designing and Care, Lodz, 1997, p.204-215
IV.10. Belov E.B., Lomov S.V., Truevtzev N.N. Study of loop and snarl formation during yarn twisting, Theory
and Practice of Technological Process Developing in Textiles ("PROGRESS-97"), Ivanovo, 1997, [s.p.] (in
Russian)
IV.11. Belov E.B., Lomov S.V., Truevtzev N.N. Study of Snarling in Technological processes of yarn
production and handling, Proceedings of International Conference "FLAX-98", Kostroma, 1998, [s.p.] (in
Russian)
IV.12. Lomov S.V., Moshkov G.V. Modelling a “Californian Ice Pick Test”: first step towards model of stab
resistance, Personal Armour Systems Symposium (PASS-98), Colchester: Defence Clothing and Textile
Agency, 1998
IV.13. Fyodorov V.V., Dulnev A.I., Agafonov N.A., Lomov S.V. A model of ceramic fracture under high-
velocity impactm, Personal Armour Systems Symposium (PASS-98), Colchester: Defence Clothing and
Textile Agency, 1998
IV.14. Lomov S.V. Computational aspects of modelling of ballistic impact on woven structures, Computer
Methods in Composite Materials VI, ed. de Wilde, W.P. Blain, W.R. Brebbia, C.A. Southhampton – Boston:
Computational Mechanics Publications, 1998, p. 265-274
IV.15. Gusakov, A.V., Lomov, S.V., Mogilny, A.N. Mathematical modelling of porosity of plane and 3D woven
structures, Computer Methods in Composite Materials VI, ed. de Wilde, W.P. Blain, W.R. Brebbia, C.A.,
Southhampton – Boston: Computational Mechanics Publications, 1998, p. 331-340
IV.16. Gusakov, A.V., Lomov, S.V., Mathematical modelling of internal structure of 3D woven fabrics, 10th
International Conference on Mechanics of Composite Materials, Riga 1998, p. 200
IV.17. Prodromou A.G., Ivens, J., Huysmans, G., Lomov, S. and Verpoest, I. Stiffness and failure modelling of
textile composites, ICCM-12 Conference, Paris, June 1999 (CD edition)
IV.18. Verpoest, I. Lomov, S.V. Huysmans, G. Ivens, J. Modelling the processing and properties of textile
composites: an integrated approach, 9th European Conference on Composite Materials Brighton, 2000 (CD
edition)
IV.19. Lomov, S.V. G.Huysmans, Luo, Y., Prodromou, A.Verpoest, I.,Gusakov, A.V. Textile Geometry
Preprocessor for meso-mechanical and permeability modelling of textile composites, 9th European
Conference on Composite Materials Brighton, 2000 (CD edition)
IV.20. Lomov, S.V. G.Huysmans, Luo, Y., Prodromou, A.Verpoest, I. Textile composites: modelling strategies,
The 5th
International Conference on Textile Composites (TexComp-5), Leuven, 2000 (s.p.)
IV.21. G.Huysmans, Savci, S., Luo, Y., Lomov, S.V..Verpoest, I. Topology of weft knitted fabrics: a coding and
visualisation algorithm, The 5th
International Conference on Textile Composites (TexComp-5), Leuven, 2000
(s.p.)
IV.22. Prodromou A.G., Huysmans, G., Lomov, S., Ivens, J.,Verpoest, I. A novel textile composites design and
analysis tool, Advances in Composites Materials and Structures VII, ed. de Wilde, W.P. Blain, W.R. Brebbia,
C.A. Southampton, Boston: WIT press, 2000, p. 197-206
IV.23. Lomov, S.V.,Verpoest, I. Integrated model of textile composite reinforcements, Advances in Composites
Materials and Structures VII, ed. de Wilde, W.P. Blain, W.R. Brebbia, C.A. Southampton, Boston: WIT press,
2000, p. 367-376
IV.24. Lomov, S.V. Predictive models of a woven target protective ability, Proceedings of Personal Armour
Systems Symposium (PASS-2000) Colchester: DCTA, 2000, p. 131-141
Curriculum Vitae and Bibliography S. V. Lomov 22
IV.25. Lomov, S.V., Verpoest, I., Kondratiev, S.V. and Borovkov, A.I. An integrated model strategy for
processing and properties of textile composites: New results. Proceedings of the 22nd
International SAMPE
Europe Conference, ed.Griffith, G.R. and McCarthy, R.F.J. Paris, France, March 27th
-29th
, 2001, p.379-389
IV.26. Lomov, S.V., Verpoest, I. WiseTex – a "virtual textile" software. Proceedings of 11th
International
TechTextil Symposium, Frankfurt-am-Main, 2001 (CD edition)
IV.27. Lomov, S.V., Belov, E.B. Verpoest, I. Integrated models for property prediction and processing
optimisation of textile-based composite, The Structural Integrity of Composite materials & Structures, 20-25th
May 2001, Capri, Italy (CD edition)
IV.28. S.V.Lomov, E.Belov, R.Parnas, A.Prodromou and I.Verpoest, Textile Composites Models: Integrating
Strategies, ICCM-13, Beijing, 2001 (CD edition)
IV.29. S.V.Lomov, I.Verpoest. WiseTex – Virtual Textile software, Proceedings of the 2nd Central European
Conference on Fibre-Grade Polymers, Chemical Fibres and Special Textiles, Bratislava, 2001. p.174-184
IV.30. Verpoest, I., Huysmans, G., Luo, Y., Parnas, R.S., Prodromou, A., Lomov, S.V., An integrated
modelling strategy for processing and properties of textile composites, Proceedings of 46th International
SAMPE symposium and exhibition, Long Beach, California, USA, May 6th – 10th, 2001, pp. 2472-2483
IV.31. S.V.Lomov, I.Verpoest. WiseTex – Virtual Textile software, Proceedings of the ICMAC - International
Conference for Manufacturing of Advanced Composites, Belfast, 2001. p. 36-43
IV.32. Carvelli V., Lomov S., Poggi C., Prodromou A., Verpoest I. Analytical and finite element models for the
prediction of the mechanical properties of textile composites, Proceeding of the 15th AIMETA Congress of
Theoretical and Applied Mechanics, 26-29 September 2001, Taormina (Italy), CD-ROM
IV.33. Verpoest, I., Lomov, S., Belov, E., Parnas, R., Prodromou, A. Textile composites models: integration
strategies, Proceedings of the 7th
Japan International SAMPE Symposium, Tokyo, 13-16 November 2001,
p.689-692
IV.34. Lomov, S.V., Belov, E.B., Verpoest, I. Integrated models of textile composites, High Performance
Structures and Composites, ed. C.A.Brebbia and W.P.de Wilde, WIT Press, Southampton, Boston, 2002,
p.481-490
IV.35. J. Summerscales, P.M. Russell, S. Lomov, I. Verpoest and R. S Parnas, The fractal dimensions of
tomographic sections of a woven composite, Sixth International Conference on Microscopy of Composite
Materials, Oxford, 25-26 March 2002.
IV.36. Lomov, S.V., Belov, E.B., Verpoest, I. From "virtual textiles" to "virtual composites": Integrated
simulation and design computer tools, Proceedings of 9th
International Conference on Fibre Reinforcement
Composites, ed. Gibson, A.G. Newcastle, 2002, p.129-136\
IV.37. Lomov, S.V., Belov, E.B., Bischoff, T.,Verpoest, I. Internal structure of multi-axial multi-ply stitched
carbon reinfrcements: experimental investigation and WiseTex modelling, Proceedings of 23rd
International
SAMPE Europe Conference, ed. Barnes, F.J., McCarthy, R.J., Paris, 2002, 553-564
IV.38. Lomov, S.V., Belov, E.B., Verpoest, I. Behaviour of textile reinforcement in composite processing:
Mathematical modelling of deformability, internal geometry and permeability of the preform, Proceedings of
the 5th
International ESAFORM Conference on Material Forming, ed. Pietrzyk, M., Mitura, Z., Kaczmar, J.
Krakow, 2002, 271-274
IV.39. Hoes, K., Dinesku, D., Vanhuele, M., Sol, H., Parnas, R., Belov, E.B., Lomov, S.V. Statistical
distribution of permeability values of different porous materials, Proceedings of the 10th
European Conference
on Composite Materials (ECCM-10), ed. Sol, H., Degriek, J., Brugge, 2002, CD edition
IV.40. Prodromou, A., Lomov, S.V., Verpoest, I. A novel textile composites analysis tool, Proceedings of the
10th
European Conference on Composite Materials (ECCM-10), ed. Sol, H., Degriek, J., Brugge, 2002, CD
edition
IV.41. Belov, E.B., Lomov, S.V., Verpoest, I. , Parnas, R., Hoes, K., Sol, H., Modelling of permeability of
textile reinforcements: Lattice Boltzmann method, Proceedings of the 10th
European Conference on Composite
Materials (ECCM-10), ed. Sol, H., Degriek, J., Brugge, 2002, CD edition
IV.42. Truong Chi, T., Lomov, S.V., Verpoest, I. The mechanical properties of multiaxial multiply carbon
fabric reinforced Epoxy composites, Proceedings of the 10th
European Conference on Composite Materials
(ECCM-10), ed. Sol, H., Degriek, J., Brugge, 2002, CD edition
IV.43. Lomov, S.V., Verpoest, I. Modelling of the internal structure and permeability of textile reinforcements:
WiseTex software, Proceedings of the 10th
European Conference on Composite Materials (ECCM-10), ed. Sol,
H., Degriek, J., Brugge, 2002, CD edition
Curriculum Vitae and Bibliography S. V. Lomov 23
IV.44. Lomov, S.V., Verpoest, I., Modelling of internal structure, deformability and permeability of textile
reinforcements, Proceedings of the 6th
International Symposium in Textile Composites (TEXCOMP 6),
Philadelphia, USA, September 11-13, 2002 (CD edition).
IV.45. Delerue J.-F., S.V. Lomov, R. Parnas, I. Verpoest, M. Wevers, Pore Network Modelling of Permeability
of Textile, Proceedings of the 6th
International Symposium in Textile Composites (TEXCOMP 6), Philadelphia,
USA, September 11-13, 2002 (CD edition).
IV.46. Wambua, P., Vangrimde, B., Lomov, S. V., Verpoest, I., Mechanical behaviour and ballistic impact
response of hemp and flax fabric polypropylene composites, Proceedings of the 23rd
Risø International
Symposium on Materials Science, Roskilde, Denmark, 2nd
-5th
September 2002, pp. 357-365.
IV.47. Wambua, P., Vangrimde, B., Lomov, S. V., Verpoest, I., An anti-personnel mine protection based on
natural fibres, Proc. 4th
International Congress on Materials Made from Renewable Sources, Erfurt, 10-11
September 2003, CD edition
IV.48. Lomov, S.V. Verpoest, I. Modelling the deformability of woven and braided fabrics: Compression, bi-
axial tension, shear and deformed internal geometry. CompTest-2003, Chalons-en-Champagne, 28-30 January
2003, CD edition
IV.49. R. Loendersloot, R. ten Thije, S. Lomov, R. Akkerman, I. Verpoest, Geometry, compressibility and
porosity of sheared non-crimp fabrics, in: Proceedings of SiComp Conference, Pitea, 2003, CD-edition.
IV.50. Lomov, S.V., Peeters, T., Roose, D., Verpoest, I. Nesting in textile laminates: Geometrical modelling of
the laminate. Proceedings of the 24th
International SAMPE Europe Conference, Paris, April 1-3, 2003, 123-
130
IV.51. Loendersloot, R., Lomov, S.V.,Akkerman, R., Verpoest, I. Architecture and permeability of sheared
carbon fibre non-crimp fabrics. Proceedings of the 24th
International SAMPE Europe Conference, Paris, April
1-3, 2003, 141-148
IV.52. Truong Chi, T., Lomov, S.V., Verpoest, I. The mechanical properties of non-crimp carbon fabric
composites. Proceedings of the 24th
International SAMPE Europe Conference, Paris, April 1-3, 2003, 545-552
IV.53. Moesen, M, Lomov, S.V., Verpoest, I. Modelling of the geometry of weft-knit fabrics, TechTextil
Symposium, Frankfurt 7-10 April, 2003, CD edition
IV.54. Koltysheva, N.G., Lomov, S.V. Truevtzev, N.N. Abrasion resistance of cotton/flax fabrics: 3D Computer
simulations of the fabric wear geometry, VII international conference ArchTex, Lodz, 2003 pp.145-148
IV.55. Ivanov, D.S., Lomov, S.V., Verpoest, I., Tashkinov, A.A. Local elastic properties of a shaped textile
composite: Homogenisation algorithm, Proceedings of the 6th ESAFORM Conference on Material Forming,
Salerno, April 28-30, 2003, 839-842
IV.56. Lomov, S.V., Barburski, M., Verpoest, I., Masajtis, J., Laperre, J. Deformability of multiaxial textile
reinforcements: KES-F testing, Proceedings of the 6th
ESAFORM Conference on Material Forming, Salerno,
April 28-30, 2003, 843-846
IV.57. Koltysheva, N.G., Lomov, S.V., Mariev, V.A. Computer design of weaves with predetermined
parameters and 3D simulation of the woven structures. Perspectives in computer technologies in textile and
light industry, Proceedings of the 1st International Conference, Ivanovo, 2003, 19-20.
IV.58. Lomov, S.V., Barburski, M., Verpoest, I., Masajtis, J., Laperre, J. Deformability of multiaxial textile
reinforcements: KES-F testing, 3rd
AUTEX Conference, Gdansk, 25-27 June, 2003, CD edition
IV.59. Truong Chi, T., Vettori, M., Lomov, S.V., Verpoest, I. Multi-axial multi-ply carbon fabric reinforced
epoxy composites: mechanical poperties and investigation of initial damage, Proceedings ICCM-14, San
Diego, California, July 14-18, 2003, CD edition
IV.60. Lomov, S.V., Barburski, M., Truong Chi, T., Verpoest, I. Deformability and internal geometry of textile
reinforcements and laminates, Proceedings ICCM-14, San Diego, California, July 14-18, 2003, CD edition
(SME Paper TP03PUB362)
IV.61. Rudov-Clark, S. , Lomov, S.V. , Bannister, M.K. , Mouritz, A.P. , Verpoest, I. Geometric and mechanical
modelling of 3d woven composites, Proceedings ICCM-14, San Diego, California, July 14-18, 2003, CD
edition
IV.62. Desplentere, F. Lomov, S.V. Woerdeman, D. Verpoest, I. Wevers, M. Szucs, P., Bogdanovich, A.
Geometrical characterisation of 3D warp-interlaced fabrics, Proceedings 48th SAMPE-USA Symposium, Long
Beach, 1335-1347, 2003
IV.63. Lomov, S.V. Verpoest, I. WiseTex - virtual textile reinforcement software, Proceedings 48th SAMPE-
USA Symposium, Long Beach, 2003, 1320-1334
Curriculum Vitae and Bibliography S. V. Lomov 24
IV.64. Mikolanda, T., Lomov, S.V., Kosek, M., Verpoest, I. Simple use of virtual reality for effective
visualization of textile material structures, CODATA Prague Workshop Information Visualization,
Presentation, and Design, 29-31 March 2004, CD edition
IV.65. Lomov, S.V., Stoilova, Tz., Verpoest, I. Shear of woven fabrics: Theoretical model, numerical
experiments and full field strain measurements, Proceedings of the 7th Esaform Conference on Material
Forming, Trondheim, Norway, 2004, 345-348
IV.66. Cao, J., H.S. Cheng, T.X. Yu, B. Zhu, X.M. Tao, S.V. Lomov, T. Stoilova, I. Verpoest, P. Boisse, J.
Launay, et al., A cooperative benchmark effort on testing of woven composites, in Proceedings of the 7th
Esaform Conference on Material Forming. 2004: Trondheim, Norway. 305-308
IV.67. Van den Broucke, B., Tumer, F., Lomov, S.V., Verpoest, I., De Luka, P., Dufort, L. Micro-macro
structural analysis of textile composite parts: Case study, Proceedings of the 25th
International SAMPE Europe
Conference, Paris, March 30th
– April 1st, 2004, 194-199
IV.68. Desplentere, F., Lomov, S.V., Verpoest, I., Influence of the scatter of perform permeability on the mould
filling: Numerical simulations Proceedings of the 25th
International SAMPE Europe Conference, Paris, March
30th
– April 1st, 2004, 331-336
IV.69. Lomov, S.V., Peeter, T., Roose, D., Verpoest, I. Modelling of permeability of textile reinforcements:
Lattice Boltzmann method, Proceedings of the 25th
International SAMPE Europe Conference, Paris, March
30th
– April 1st, 2004, 367-392
IV.70. Desplentere, F., Lomov, S.V., Verpoest, I. Mold filling simulations for RTM: Influence of the scatter of
perform permeability, The 7th
International Conference on Flow Processes in Composite Materials, Newark,
Delaware, USA, 7-9 July 2004, s.p.
IV.71. Jao Jules, E., Lomov, S. V., and Verpoest, I., “Characterization of random long fiber composites and
prediction of the local stiffness properties“, Proceedings of the International Conference on Flow Processes in
Composite Materials (FPCM 7), Newark, Delaware, USA, July 7-9, 2004, pp. 497-502.
IV.72. Carvelli, V., Truong Chi, T., Larosa, M., Lomov, S. V., Poggi, C., Ranz Angulo, D., Verpoest, I.
"Experimental and numerical determination of the mechanical properties of multi-axial multi-ply composites",
Proceedings ECCM-11. Rodos, 2004, p.CD edition.
IV.73. Kurashiki, T., Zako, M., Hirosawa , S., Lomov, S. V., Verpoest, I. "Estimation of a mechanical
characterization for woven fabric composites by fem based on damage mechanics", Proceedings ECCM-11.
Rodos, 2004, p.CD edition.
IV.74. Loendersloot, R., ten Thije, R. H. W., Akkerman, R., Lomov, S. V. "Permeability prediction of non-
crimp fabrics based on a geometric model", Proceedings ECCM-11. Rodos, 2004, p.CD Edition.
IV.75. Lomov, S. V., Van den Broucke, B., Tumer, F., Verpoest, I., De Luka, P., Dufort, L. "Micro-macro
structural analysis of textile composite parts", Proceedings ECCM-11. Rodos, 2004, p.CD Edition.
IV.76. Vettori, M., Truong Chi, T., Lomov, S. V., Verpoest, I. "Progressive damage characterization of stitched,
biaxial, multi-ply carbon fabrics composites", Proceedings ECCM-11. Rodos, 2004, p.CD edition.
IV.77. Desplentere, F., S.V. Lomov, and I. Verpoest, Influence of the scatter of preform permeability on the
mould filling: Numerical simulations, in Proceedings of the 7th International Conference on Textile
Composites (TexComp-7). 2004: Yonezawa. (Textile 9)1-4
IV.78. Kurashiki, T., S. Hirosawa , M. Zako, S.V. Lomov, and I. Verpoest, On a numerical simulation of the
mechanical behaviour for laminated woven fabric composites under tensile loading, in Proceedings of the 7th
International Conference on Textile Composites (TexComp-7). 2004: Yonezawa. (Textile 13)1-4
IV.79. Ivanov, D.S., S.V. Lomov, and I. Verpoest, Zero and first order homogenisation schemes: Comparison
with a full FE model, in Proceedings of the 7th International Conference on Textile Composites (TexComp-7).
2004: Yonezawa. (Textile 15)1-4
IV.80. Lomov, S.V., I. Verpoest, and T. Stoilova, Shear of woven fabrics: theoretical model and parametric
study, in Proceedings of the 7th International Conference on Textile Composites (TexComp-7). 2004:
Yonezawa. (Textile 16)1-4
IV.81. Truong Chi, T., S.V. Lomov, I. Verpoest, M. Vettori, and D. Ranz Angulo, Mechanical properties and
initial damage in carbon non-crimp fabric reinforced epoxy composites, in Proceedings of the 7th International
Conference on Textile Composites (TexComp-7). 2004: Yonezawa. (Textile 18)1-4
IV.82. Lomov, S.V., T. Stoilova, and I. Verpoest, Strain fields in the picture frame test, in Proceedings of the
Composite Testing and Identification Conference (CompTest-2). 2004: Bristol. CD edition
Curriculum Vitae and Bibliography S. V. Lomov 25
IV.83. Vettori, M., T. Truong Chi, S.V. Lomov, and I. Verpoest, Progressive damage characterisation of stitched
bi-axial multi-ply carbon fabric composites, in Proceedings of the Composite Testing and Identification
Conference (CompTest-2). 2004: Bristol. CD edition
IV.84. Kyosev,Y., Lomov,S., Stoilova, Tz. (2004) Investigation over the Thickness of Glass/Polypropylene
Woven Fabrics for Composites: Compression Test, 31. Aachener Textiltagung / 31st Aachen Textile
Conference, November 24-25, poster, CD-ROM edition, in DWI Reports 2004/128, editor: Brigitte Kueppers,
ISSN 0942-301X, DWI-Aachen, Germany
IV.85. S.V.Lomov, X. Ding, S.Hirosawa, S.V.Kondratiev, J.Molimard, H.Nakai, A.Vautrin, I.Verpoest, M.Zako,
FE simulations of textile composites on unit cell level: validation with full-field strain measurements,
Proceedings 26th
SAMPE-Europe Conference, Paris, 5th
-7th
April 2005, 28-33
IV.86. Thanh Truong Chi, Ho Chiew Jie, Stepan V. Lomov, Ignaas Verpoest, Sheared biaxial multi-ply carbon
fabrics reinforced epoxy composites: the mechanical properties and damage initiation, Proceedings 26th
SAMPE-Europe Conference, Paris, 5th
-7th
April 2005, 252-257
IV.87. Laine, B., Hivet, G., Boisse, P., Boust, F., Lomov, S.V. Permeability of the woven fabrics: A parametric
study, Procedings of the 8th
ESAFORM Conference on Material Forming, Cluj-Napoca, 27th
-29th
April 2005,
995-998
IV.88. Willems, A., Vanderpitte, D., Lomov, S.V., Verpoest, I. Biaxial tensile tests on a woven glass/PP fabric
under optical strain measurement, Procedings of the 8th
ESAFORM Conference on Material Forming, Cluj-
Napoca, 27th -29
th April 2005, 1007-1010
IV.89. Lomov, S.V., Willems, A., Barburski, M., Stoilova, Tz., Verpoest, I. Strain field in the picture frame test:
Large and small scale optical measurements, Procedings of the 8th
ESAFORM Conference on Material
Forming, Cluj-Napoca, 27th
-29th
April 2005, 935-938
IV.90. Lomov, S.V., Verpoest, I., Bernal, E., Boust, F., Carvelli, V., Delerue, J.-F., De Luca, P., Dufort, L.,
Hirosawa, S., Huysmans, G., Kondratiev, S., Laine, B., Mikolanda, T., Nakai, H., Poggi, C., Roose, D., Tumer,
F., van den Broucke, B., Verleye, B., Zako, M. Virtual textile composites software WiseTex: integration with
micro-mechanical, permeability and structural analysis, Proceedings of the 15th
International Conference on
Composite Materials, Durban 27th
June – 1st July 2005, CD edition
IV.91. Kurashiki, T., Zako, M., Hirosawa, S., Imura, M., Lomov, S.V., Verpoest, I. A numerical simulation of
woven fabric composites by fem based on damage mechanics, Proceedings of the 15th
International
Conference on Composite Materials, Durban 27th
June – 1st July 2005, CD edition
IV.92. Jao Jules, E., Lomov, S. V., Verpoest, I., Naughton, P., Beekman A.W., Van Daele R. Prediction of non-
linear behaviour of discontinuous long glass fibres polypropylene composites, Proceedings of the 15th
International Conference on Composite Materials, Durban 27th
June – 1st July 2005, CD edition
IV.93. Verleye, B., Klitz, M., Croce, R., Roose, D., Lomov, S.V., Verpoest, I., Computation of permeability of
textile reinforcements, 17th
IMACS World Congress, Paris, 2005, CD Edition
IV.94. T. Van Cleynenbreugel, J. Schrooten, G. Furtos, S.V. Lomov, J. Vander Sloten. Validation of µCT
scanning as a tool for the structural characterization of bone scaffolds. 19th
European Conference on
Biomaterials, September 11-15, 2005, Sorrento (Italy), CD Edition
IV.95. S.V. Lomov, F. Baudry, D.S. Ivanov, T.C. Truong, I. Verpoest, M.Vettory, H. Xie, Experimental
methodology of study of damage initiation and development in textile composites, 27th
International SAMPE-
Europe Conference, Paris, 27-29 March 2006, 21-26
IV.96. Verleye, B., D. Roose, S.V. Lomov, I. Verpoest, G. Morren, and H. Sol, Computation of permeability of
textile reinforcements, in The 9th International Conference on Material Forming ESAFORM, April 26-28,
2006, N. Juster and A. Rosochowski, Editors. 2006: Glasgow. 735-738
IV.97. Willems, A., S.V. Lomov, D. Vandepitte, and I. Verpoest, Double dome forming simulations of woven
textile composites, in The 9th International Conference on Material Forming ESAFORM, April 26-28, 2006,
N. Juster and A. Rosochowski, Editors. 2006: Glasgow. 747-750
IV.98. Lomov, S.V., A. Willems, D. Vandepitte, and I. Verpoest, Simulations of shear and tension of glass/PP
woven fabrics, in The 9th International Conference on Material Forming ESAFORM, April 26-28, 2006, N.
Juster and A. Rosochowski, Editors. 2006: Glasgow. 783-786
IV.99. D.S.Ivanov, S.V.Lomov, I.Verpoest, A.Zisman, Noise reduction of strain mapping data and identification
of damage initiation of carbon-epoxy triaxial braided composite, Composites Testing and Model Identification
(CompTest-2006), Porto, 2006, CD Edition
IV.100. Gerd Morren, Jun Gu, Hugo Sol, Bart Verleye, Stepan Lomov, Full-field measurements for permeability
identification by inverse methods, SEM Annual Conference & Exposition on Experimental and Applied
Mechanics, St. Louis, Missouri, USA, June 2006, CD edition
Curriculum Vitae and Bibliography S. V. Lomov 26
IV.101. B. Van Den Broucke, Ch. Eisenhauer, P. Middendorf, S.V. Lomov, I. Verpoest, Modelling of damage in
textile reinforced composites: micro-meso approach, Proceedings CDCM06, Stuttgart, 18-19 September 2006.
IV.102. Laine, B., Hivet, G., Boisse, Ph., Boust, F., Lomov, S.V., Badel, P. Permeability of the woven fabrics,
The 8th International Conference on Flow Processes in Composite Materials (FPCM8), Douai, FRANCE - 11
– 13 July 2006, CD edition
IV.103. Lomov, S.V., Verpoest, I., Verleye, B., Laine, B., Boust, F., WiseTex-based models of permeability of
textiles, The 8th International Conference on Flow Processes in Composite Materials (FPCM8), Douai,
FRANCE - 11 – 13 July 2006, CD edition
IV.104. Verleye, B., Klitz, K., Croce, R., Griebel, M., Lomov, S.V., Roose, D., Verpoest, I., Predicting the
permeability of textile reinforcements via a hybrid Navier-Stokes/Brinkman solver, The 8th International
Conference on Flow Processes in Composite Materials (FPCM8), Douai, FRANCE - 11 – 13 July 2006, CD
edition
IV.105. Desplentere, F., Lomov, S.V., Verpoest, I., Correlated permeability distribution: mould filling simulations
versus experimental results, The 8th International Conference on Flow Processes in Composite Materials
(FPCM8), Douai, FRANCE - 11 – 13 July 2006, CD edition
IV.106. Ivanov, D., Lomov, S.V., Verpoest, I., Baudry, F., Xie, H. Damage initiation and development in triaxial
braid and fine structure of damage, Proceedings of the European Conference on Composite Materials (ECCM-
12), Biarritz, 29th
August – 1st September 2006, CD Edition
IV.107. Lomov, S.V., Prodromou, A. Verpoest, I., Verleye, B., Roose, D., Peeters, T., Laine, B. Voxel
representation of the unit cell of textile reinforcement: Mechanical properties and permeability, Proceedings of
the European Conference on Composite Materials (ECCM-12), Biarritz, 29th
August – 1st September 2006, CD
Edition
IV.108. Koissin, V., Ruopp, A., Lomov, S.V., Verpoest, I., Witzel, V., Drechsler, K. Internal structure of
structurally stitched preform, Proceedings of the European Conference on Composite Materials (ECCM-12),
Biarritz, 29th
August – 1st September 2006, CD Edition
IV.109. Kurashiki, T., Zako, M., Nakai, H., Hirosawa, S., Imura, M., Lomov, S.V., Verpoest, I. A practical
numerical simulation system of mechanical behaviour of composites, Proceedings of the European Conference
on Composite Materials (ECCM-12), Biarritz, 29th
August – 1st September 2006, CD Edition
IV.110. Willems, A., Lomov, S.V., Yingbo, Z., Verpoest, I., Vandepitte, D. Deformability characterisation of
fabrics using large and small scale full field optical strain measurements, Proceedings of the European
Conference on Composite Materials (ECCM-12), Biarritz, 29th
August – 1st September 2006, CD Edition
IV.111. Vallons, K., Zong, M., Lomov, S.V., Verpoest, I. Carbon composites based on multi-axial multi-ply
stitched preforms: Stiffness degradation and tensile strength evolution during fatigue, Proceedings of the
European Conference on Composite Materials (ECCM-12), Biarritz, 29th
August – 1st September 2006, CD
Edition
IV.112. Zisman, A.A., Ivanov, D.S., Lomov, S.V., Verpoest, I. Processing discrete data by gradient matrix:
Application to strain-mapping of textile composites, Proceedings of the European Conference on Composite
Materials (ECCM-12), Biarritz, 29th
August – 1st September 2006, CD Edition
IV.113. Koissin, V., Ivanov, D.S., Lomov, S.V., Verpoest, I., Fibre distribution inside yarns of textile composite:
geometrical and FE modelling, Proceedings of the 8th International Conference on Textile Composites
(TexComp-8), Nottingham, 2006, CD edition
IV.114. Klimshin, D.V. Shanina, A.S. Borovkov, A.I. Lomov, S.V. Verpoest, I. Macro-criterion and multi-level
analysis of damage in fibre reinforced composites under complex 3D loading conditions, Proceedings of the
8th International Conference on Textile Composites (TexComp-8), Nottingham, 2006, CD edition
IV.115. Ivanov, D.S., Lomov, S.V., Verpoest, I., Error of classical homogenisation for the problem with high
macro strain gradients, Proceedings of the 8th International Conference on Textile Composites (TexComp-8),
Nottingham, 2006, CD edition
IV.116. Desplentere, F., Lomov, S.V., Verpoest, I., Validation of stochastic mould filling simulations with
correlated permeability fields, Proceedings of the 8th International Conference on Textile Composites
(TexComp-8), Nottingham, 2006, CD edition
IV.117. Ivanov, D.S., Lomov, S.V., Verpoest, I., Zako, M., Nakai, Kurashiki, T., Hirosawa, S, Meso-FE
modelling of 3-axial braided composites, Proceedings of the 8th International Conference on Textile
Composites (TexComp-8), Nottingham, 2006, CD edition
IV.118. Morren Gerd, Gu, Jun, Sol Hugo, Verleyen Bart, Lomov Stepan “Permeability identification of textile
structures by inverse methods”, , Proceedings of the 7th
congres on theoretical and applied mechanics, Mons,
Belgium, May 2006
Curriculum Vitae and Bibliography S. V. Lomov 27
IV.119. Tolosana, N., S.V. Lomov, J. Stuve, and A. Miravete, Development of a simulation tool for 3D braiding
architectures, in Proceedings of the 10th ESAFORM Conference. 2007, American Institute of Physics:
Zaragoza, 1005-1010 http://proceedings.aip.org/proceedings/
IV.120. Vanclooster, K., S.V. Lomov, A. Willems, and I. Verpoest, Measurement of local deformations on
thermoformed composite parts under different process conditions, in Proceedings of the 10th ESAFORM
Conference. 2007, American Institute of Physics: Zaragoza, 1058-1063 http://proceedings.aip.org/proceedings/
IV.121. Verleye, B., R. Croce, M. Griebel, M. Klitz, S.V. Lomov, I. Verpoest, and D. Roose, Finite difference
computation of the permeability of textile reinforcements with a fast Stokes solver and new validation
examples, in Proceedings of the 10th ESAFORM Conference. 2007, American Institute of Physics: Zaragoza,
945-950 http://proceedings.aip.org/proceedings/
IV.122. Willems, A., S.V. Lomov, I. Verpoest, and D. Vandepitte, Picture frame shear tests on woven textile
composite reinforcements with controlled pretension, in Proceedings of the 10th ESAFORM Conference.
2007, American Institute of Physics: Zaragoza, 999-1004 http://proceedings.aip.org/proceedings/
IV.123. Van Den Broucke, B., K. Drechsler, V. Hanisch, D. Hartung, D.S. Ivanov, V.E. Koissin, S.V. Lomov, P.
Middendorf, A. Miravete, M. Schouten, et al., Multilevel modelling of mechanical properties of textile
composites: ITOOL project, in Proceedings of the 28th International Conference of SAMPE Europe. 2007:
Paris. 175-180
IV.124. Lomov, S.V., L. Dufort, P. De Luca, and I. Verpoest, Meso-macro integration of modelling of stiffness of
textile composites, in Proceedings of the 28th International Conference of SAMPE Europe. 2007: Paris. 403-
408
IV.125. Vallons, K., S.V. Lomov, and I. Verpoest, Mechanical properties and damage evolution during static and
fatigue loading of carbon-epoxy NCF composites, in Proceedings of the 28th International Conference of
SAMPE Europe. 2007: Paris. 670-675
IV.126. Verleye, B., G. Morren, S.V. Lomov, H. Sol, and D. Roose, Userfriendly permeability predicting
software for technical textiles, in Industrial Simulation Conference 2007, J. Ottjes and H. Veeke, Editors. 2007:
Delft. 455-458
IV.127. M. Moesen, S.V. Lomov, I. Verpoest 'The condualistic approach for modelling the geometry of
heterogeneous materials' Proceedings of the Conference on Modelling of Heterogeneous
Materials(MHM2007), Prague, Czech Republic, 25-27 June 2007, pp. 224-225
IV.128. Verleye, B., S.V. Lomov, A. Long, D. Roose, and C.C. Wong, Permeability of textile reinforcements:
efficient prediction and validation, in 16th International Conference On Composite Materials (ICCM-16).
2007: Kyoto. CD edition
IV.129. Koissin, V., S.V. Lomov, and I. Verpoest, Internal geometry of structurally stitched NCF preforms, in
16th International Conference On Composite Materials (ICCM-16). 2007: Kyoto. CD edition
IV.130. Vallons, K., S.V. Lomov, and I. Verpoest, Fatigue and post-fatigue behaviour of carbon/epoxy non-crimp
fabric composites, in 16th International Conference On Composite Materials (ICCM-16). 2007: Kyoto. CD
edition
IV.131. Lomov, S.V., D.S. Ivanov, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai, and T. Kurashiki, Meso-FE
modelling of textile composites: road map, data flow and algorithms, in 16th International Conference On
Composite Materials (ICCM-16). 2007: Kyoto. CD edition
IV.132. Lomov, S.V., D.S. Ivanov, K. Vallons, I. Verpoest, D.V. Klimshin, and T. Truong Chi, Peculiarities of
damage behaviour of ncf carbon/epoxy laminates under tension, in 16th International Conference On
Composite Materials (ICCM-16). 2007: Kyoto. CD edition
IV.133. Moesen, M., S.V. Lomov, and I. Verpoest, Parametric modelling and finite element mesh generation for
porous bone scaffolds, in Proceedings of the 2007 Summer Workshop of the European Society of
Biomechanics (ESB2007). 2007: Dublin. 96-97
IV.134. Lomov, S.V., D.S. Ivanov, B. Van Den Broucke, I. Verpoest, M. Zako, T. Kurashiki, H. Nakai, and S.
Hirosawa, Meso-FE modelling of textile composites: road map, data flow and algorithms, in Proceedings of
symposium "Finite element modelling of textiles and textile composites". 2007: St.-Petersburg. CD edition
IV.135. Lomov, S.V., S. Ivanov, D.S. Ivanov, and I. Verpoest, Modelling of mechanical behaviour of textile
glass-polypropylene composite, in Proceedings of symposium "Finite element modelling of textiles and textile
composites". 2007: St.-Petersburg. CD edition
IV.136. Prodromou, A., S.V. Lomov, and I. Verpoest, Mechanical properties of textile composites: analytical vs.
numerical models, in Proceedings of symposium "Finite element modelling of textiles and textile composites".
2007: St.-Petersburg. CD edition
Curriculum Vitae and Bibliography S. V. Lomov 28
IV.137. Koissin, V., S.V. Lomov, and I. Verpoest, Meso-scale modelling of structurally stitched preform, in
Proceedings of symposium "Finite element modelling of textiles and textile composites". 2007: St.-Petersburg.
CD edition
IV.138. Hanaki, S., S.V. Lomov, I. Verpoest, M. Zako, and T. Uchida, Estimation of fatigue life for textile
composites based on fatigue test for unidirectional materials, in Proceedings of symposium "Finite element
modelling of textiles and textile composites". 2007: St.-Petersburg. CD edition
IV.139. Van den Broucke, B., P. Middendorf, S.V. Lomov, and I. Verpoest, Modelling of damage in textile
reinforced composites: micro-meso approach, in Proceedings of symposium "Finite element modelling of
textiles and textile composites". 2007: St.-Petersburg. CD edition
IV.140. Ivanov, D.S., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Criterion of damage zone propagation in
damage mechanics of textile composites, in Proceedings of symposium "Finite element modelling of textiles
and textile composites". 2007: St.-Petersburg. CD edition
IV.141. Tolosana, N., S.V. Lomov, and A. Miravete, Development of a geometrical model for a 3D braiding unit
cell based on braiding machine emulation, in Proceedings of symposium "Finite element modelling of textiles
and textile composites". 2007: St.-Petersburg. CD edition
IV.142. Zako, M., Lomov, S.V., Verpoest I. FE and damage modelling of textile composites, in Proceedings of
symposium "Finite element modelling of textiles and textile composites". 2007: St.-Petersburg. CD edition
IV.143. Vallons, K., S.V. Lomov, and I. Verpoest, Damage evolution in static and fatigue tensile loading of
carbon/epoxy NCF composites, in ECCOMAS Thematic Conference on Mechanical Response of Composites,
P.P. Camanho, Editor. 2007: Porto. CD Edition
IV.144. Morren, G., Sol, H., Verleye, B., Lomov, S., Permeability Identification of a Reference Specimen Using
an Inverse Method, SEM Annual Conference & Exposition, Springfield, Massachusetts, USA, June 2007
IV.145. Godara, A., A. Warrier, L. Mezzo, S.V. Lomov, I. Verpoest, A. Van Vuure, and P. Moldenaers. Influence
of carbon nanotube reinforcement on the mechanical behavior of carbon fiber/epoxy composites. in SEICO 08
SAMPE Europe International Conference and Forum. 2008. Paris.
IV.146. Bogdanovich, A.E., D. Mungalov, S.V. Lomov, and I. Verpoest. A comparative study of mechanical
properties of 3D woven single-layer and 2D woven multi-layer E-glass composites. in SEICO 08 SAMPE
Europe International Conference and Forum. 2008. Paris.
IV.147. Willems, A., S.V. Lomov, I. Verpoest, D. Vandepitte, P. Harrison, and W.R. Yu. Forming simulation of a
thermoplastic commingled woven textile on a double dome. in 11th ESAFORM2008 conference on material
forming. 2008. Lyon.
IV.148. Vanclooster, K., S.V. Lomov, and I. Verpoest. Simulating and validating the draping of woven fiber
reinforced polymers. in 11th ESAFORM2008 conference on material forming. 2008. Lyon.
IV.149. Vanclooster, K., S.V. Lomov, and I. Verpoest. Investigation of interply shear in composite forming. in
11th ESAFORM2008 conference on material forming. 2008. Lyon.
IV.150. Lomov, S.V., D.S. Ivanov, G. Perie, and I. Verpoest. Modelling 3d fabrics and 3d-reinforced composites:
Challenges and solutions in 1ST WORLD CONFERENCE ON 3D FABRICS. 2008. Manchester.
IV.151. Boisse, P., J. Crookston, D.S. Ivanov, S.V. Lomov, A.C. Long, I. Verpoest, J. Whitcomb, and M. Zako.
Data bank for validation of finite element analysis of textiles and textile composites: a proposal. in 13th
European Conference on Composite Materials (ECCM-13). 2008. Stockholm.
IV.152. Lomov, S.V., D.S. Ivanov, I. Verpoest, A.E. Bogdanovich, D. Mungalov, M. Zako, T. Kurashiki, and H.
Nakai. Predictive analyses and experimental validations of effective elastic properties of 2D and 3D woven
composites. in 13th European Conference on Composite Materials (ECCM-13). 2008. Stockholm.
IV.153. Honda, S., M. Zako, T. Kurashiki, H. Nakai, S.V. Lomov, and I. Verpoest. A proposal of stress/strain
analytical procedure of textile composites with stitch by M3 method. in 13th European Conference on
Composite Materials (ECCM-13). 2008. Stockholm.
IV.154. Koissin, V., J. Kustermans, S.V. Lomov, I. Verpoest, H. Nakai, T. Kurashiki, K. Hamada, Y. Momoji,
and M. Zako. Structurally stitched preforms: experimental characterization, geometrical modelling, and FE
analysis. in 13th European Conference on Composite Materials (ECCM-13). 2008. Stockholm.
IV.155. Vanclooster, K., S.V. Lomov, and I. Verpoest. Simulating and validating the draping of woven fiber
reinforced polymer. in 13th European Conference on Composite Materials (ECCM-13). 2008. Stockholm.
IV.156. Vallons, K., A. Behaeghe, S.V. Lomov, and I. Verpoest. Impact and post-impact properties of carbon
fibre non-crimp fabric reinforced polymer. in 13th European Conference on Composite Materials (ECCM-13).
2008. Stockholm.
IV.157. Ivanov, D.S., S.V. Lomov, T.C. Truong, D. Klimshin, and I. Verpoest. Mesoscale analysis of damage and
stiffness degradation in non-crimp fabric composites. in 13th European Conference on Composite Materials
(ECCM-13). 2008. Stockholm
Curriculum Vitae and Bibliography S. V. Lomov 29
IV.158. Verleye, B., R. Croce, M. Griebel, M. Klitz, S.V. Lomov, G. Morren, H. Sol, I. Verpoest, and D. Roose.
Permeability of textile reinforcements: simulation; influence of shear, nesting and boundary conditions;
validation in The 9th International Conference on Flow Processes in Composite Materials (FPCM-9). 2008.
Montreal.
IV.159. Desplentere, F., I. Verpoest, and S.V. Lomov. Multiscale modelling of stochastic effects in mould filling
simulations for thermoplastic composites. in The 9th International Conference on Flow Processes in
Composite Materials (FPCM-9). 2008. Montreal.
IV.160. Ivanov, D. S., S. V. Lomov, I. Verpoest and M. Wevers (2008). Identification of damage initiation
and development in textile composite material using acoustic emission. Proceedings of 26th European
Conference on Acoustic Emission Testing, Krakow 106-111.
IV.161. Gorbatikh, L., D. S. Ivanov, S. V. Lomov and I. Verpoest (2008). The source of unrealistic
predictions of damage evolution in textile composites. 9th International Conference on Textile Composites
(TexComp-9), Newark, Delaware, USA, DEStech Publications 135-142.
IV.162. Lomov, S. V., D. S. Ivanov, V. Koissin, I. Verpoest, M. Zako, T. Kurashiki and H. Nakai (2008).
FEA of textiles and textile composites: A Gallery. 9th International Conference on Textile Composites
(TexComp-9), Newark, Delaware, USA, DEStech Publications 184-192.
IV.163. Nakanishi, Y., K. Matsumoto, M. Zako, T. Kurashiki, S. V. Lomov and I. Verpoest (2008). Material
damping simulation of textile composites by finite element analysis. 9th International Conference on Textile
Composites (TexComp-9), Newark, Delaware, USA, DEStech Publications 499-505.
IV.164. Kerckhofs, G., J. Schrooten, L. Elicegui, S. Van Bael, M. Moesen, S.V. Lomov, and M. Wevers,
Mechanical characterisation of porous structures by the combined use of micro-CT and in-situ loading, in
Proceedings of the Skyscan User Meeting 2008. Antwerp. p. CD edition.
IV.165. Kerckhofs, G., J. Schrooten, L. Elicegui, S. Van Bael, M. Moesen, S.V. Lomov, and M. Wevers,
Mechanical characterisation of porous structures by the combined use of micro-CT and in-situ loading in 17th
World Conference on Non-DEstructive Testing (WCNDT 2008). 2008: Shanghai. p. CD edition.
IV.166. Moesen, M., S.V. Lomov, J. Schrooten, H. Van Oosterlink, and I. Verpoest, Numerical optimisation of
bone scaffold geometry based on local strain distributions, in Proceedings of the 8th International Symposium
on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE-2008). 2008: Porto. p. CD
edition.
IV.167. Moesen, M., S.V. Lomov, J. Schrooten, H. Van Oosterlink, and I. Verpoest, Bone scaffold design based
on optimisation of local strain distributions, in Proceedings of the 16th Congress of the European Society of
Biomechanics (ESB 2008). 2008: Lucerne. p. CD edition.
IV.168. Lomov, S.V., D.S. Ivanov, V. Koissin, J. Kustermans, K. Vallons, J. Xu, I. Verpoest, V. Carvelli, V.N.
Tomaselli, B. Van Den Broucke, and V. Witzel. Damage initiation and development in textile composites: A
gallery. in SEICO 09 - SAMPE EUROPE 30th. International Jubilee Conference and Forum. 2009. Paris.
IV.169. Warrier, A., O. Rochez, A. Godara, L. Mezzo, F. Luizi, L. Gorbatikh, A. Van Vuure, S.V. Lomov, and I.
Verpoest. Surface modification of glass fibers with carbon nanotubes and their composites. in SEICO 09 -
SAMPE EUROPE 30th. International Jubilee Conference and Forum. 2009. Paris.
IV.170. Lomov, S.V., A.E. Bogdanovich, D.S. Ivanov, D. Mungalov, I. Verpoest, and M. Karahan. Damage
progression in 2D and non-crimp 3D woven composites. in Composites2009 - 2nd ECCOMAS Thematic
Conference on the Mechanical Response of Composites. 2009. London.
IV.171. Lomov, S.V., A.E. Bogdanovich, D.S. Ivanov, K. Hamada, T. Kurashiki, M. Zako, M. Karahan, and I.
Verpoest. Finite element modelling of progressive damage in non-crimp 3D orthogonal weave and plain weave
e-glass composites in 2nd World Conference on 3D Fabrics. 2009. Greenville, SC.
IV.172. Gorbatikh, L., S. Verheyden, S.V. Lomov, and I. Verpoest. Microstructure sensitive mechanisms of
failure initiation in hierarchical composites in Damage and Fracture in Composites (DFC-10). 2009. Sheffield.
IV.173. Lomov, S.V., L. Gorbatikh, D.S. Ivanov, and I. Verpoest. Stiffness degradation schemes in damage
modelling: pro and contra. in Damage and Fracture in Composites (DFC-10). 2009. Sheffield.
IV.174. Ivanov, D.S., T.C. Truong, S.V. Lomov, and I. Verpoest. Damage modelling of textile composites: the
least damaging entity. in Damage and Fracture in Composites (DFC-10). 2009. Sheffield.
IV.175. Moesen, M., G. Kerckhofs, S. Van Bael, S.V. Lomov, I. Verpoest, and J. Schrooten. Implicit surface-
based design of regular bone scaffolds. in ECCOMAS - International Conference on Tissue Engineering. 2009.
Leiria, Portugal
IV.176. Bogdanovich, A.E., D. Mungalov, S.V. Lomov, D.S. Ivanov, and I. Verpoest. A combined theoretical and
experimental study of progressive failure of non-crimp 3D orthogonal weave composite. in 17th International
Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
IV.177. Carvelli, V., G. Gramellini, S.V. Lomov, A.E. Bogdanovich, D. Mungalov, and I. Verpoest. Non-crimp
3D weave vs. laminated plane weave composites: tension-tension fatigue behaviour. in 17th International
Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
Curriculum Vitae and Bibliography S. V. Lomov 30
IV.178. Carvelli, V., V. Koissin, J. Kustermans, S.V. Lomov, V.N. Tomaselli, B. Van Den Broucke, I. Verpoest,
and V. Witzel. Progressive damage in stitched composites: Static tensile tests and tension-tension fatigue. in
17th International Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications
Ltd.
IV.179. Daggumati, S., I. De Baere, W. Van Paepegem, J. Degriek, J. Xu, S.V. Lomov, and I. Verpoest. Meso-
scale modelling in thermoplastic 5-harness satin weave composite. in 17th International Conference on
Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
IV.180. Gorbatikh, L., S.V. Lomov, and I. Verpoest. The role of material hierarchy in mechanisms of damage
initiation. in 17th International Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM
Communications Ltd.
IV.181. Ivanov, D.S., S.V. Lomov, K. Vallons, T.C. Truong, and I. Verpoest. Analysis of failure in textile
composites via meso-damage mechanics. in 17th International Conference on Composite Materials (ICCM-
17). 2009. Edinburgh: IOM Communications Ltd.
IV.182. Kurashiki, T., K. Hamada, S. Honda, M. Zako, S.V. Lomov, and I. Verpoest. Mechanical behaviors of
non-crimp fabric composites based on multi-scale analysis. in 17th International Conference on Composite
Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
IV.183. Ustarroz, J., I. Taketa, S.V. Lomov, and I. Verpoest. Carbon/PP composites and carbon/self-reinforced PP
composites. in 17th International Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM
Communications Ltd.
IV.184. Vallons, K., I. Duque, S.V. Lomov, and I. Verpoest. Fibre orientation effects on the tensile properties of
biaxial carbon/epoxy NCF composites. in 17th International Conference on Composite Materials (ICCM-17).
2009. Edinburgh: IOM Communications Ltd.
IV.185. Vanclooster, K., S.V. Lomov, and I. Verpoest. On the formability of multi-layered fabric composites. in
17th International Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications
Ltd.
IV.186. Whitcomb, J., S.V. Lomov, A.C. Long, J. Crookston, M. Zako, P. Boisse, B.C. Owens, D.S. Ivanov, and
I. Verpoest. Extension of the publication paradigm: the textile composites archive. in 17th International
Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
IV.187. Xu, J., S.V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, and J. Degriek. Meso-scale modeling
of static and fatigue damage in woven composite materials with finite element method. in 17th International
Conference on Composite Materials (ICCM-17). 2009. Edinburgh: IOM Communications Ltd.
IV.188. Perie, G., S.V. Lomov, I. Verpoest, and D. Marsal, Meso-scale modelling and homogenisation of
interlock reinforced composite, in 17th International Conference on Composite Materials (ICCM-17). 2009,
IOM Communications Ltd: Edinburgh. CD edition.
IV.189. Sargent, J., J. Chen, J. Sherwood, J. Cao, P. Boisse, A. Willems, K. Vanclooster, S.V. Lomov, M. Khan,
T. Mabrouki, K. Fetfatsidis, and D. Jauffres, Benchmark study of finite element models for simulating the
thermostamping of woven-reinforced composites, in Proceedings of the 13th ESAFORM Conference on
Material Forming. 2010, Springer: Brescia, CD edition.
IV.190. Vanclooster, K., S.V. Lomov, and I. Verpoest, Simulation of multi-layered composite forming, in
Proceedings of the 13th ESAFORM Conference on Material Forming. 2010, Springer: Brescia, CD edition.
IV.191. Lomov, S.V., V. Koissin, M. Karahan, A. Godara, L. Gorbatikh, and I. Verpoest, Compressibility of
CNT-grafted fibrous reinforcements: A theory, in Proceedings of the 13th ESAFORM Conference on Material
Forming. 2010, Springer: Brescia, CD edition.
IV.192. Lomov, S.V., M. Karahan, A. Godara, O. Rochez, L. Mezzo, F. Luizi, L. Gorbatikh, and I. Verpoest,
Compressibility of carbon woven fabric with carbon nanotubes grown on the fibres, in Proceedings of the
SAMPE-2010 Conference. 2010: Seattle, WA. p. CD edition.
IV.193. Gorbatikh, L., Y. Ding, N. De Greef, D.S. Ivanov, M. Karahan, A. Godara, L. Mezzo, S.V. Lomov, and I.
Verpoest, Effect of carbon nanotubes on the damage development in fiber-reinforced composites, in
Proceedings of the 14th European Conference on Composite Materials (ECCM-14). 2010: Budapest. p. CD
edition.
IV.194. Shishkina, O., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Two level microstructure-property relation for
balsa-like porous materials, in Proceedings of the 14th European Conference on Composite Materials
(ECCM-14). 2010: Budapest. p. CD edition.
IV.195. Carvelli, V., S.V. Lomov, A.E. Bogdanovich, M. Li, J. Pazmino, J. Xu, D.D. Mungalov, and I. Verpoest,
Static and fatigue tensile behaviour of 3D braided carbon/epoxy composite, in 14TH European Conference on
Composite Materials (ECCM-14). 2010: Budapest, Hungary. p. CD edition.
IV.196. Lomov, S.V., L. Gorbatikh, N. De Greef, M. Karahan, A. Godara, L. Mezzo, F. Luizi, and I. Verpoest,
Nano-engineered fibre reinforced composite: gain in properties and limitations of the manufacturing, in
Curriculum Vitae and Bibliography S. V. Lomov 31
Proceedings of the 14th European Conference on Composite Materials (ECCM-14). 2010: Budapest. p. CD
edition.
IV.197. Ivanov, D.S., S.V. Lomov, S.G. Ivanov, and I. Verpoest, Damage in textile laminates of various inter-ply
shift, in Proceedings of the 14th European Conference on Composite Materials (ECCM-14). 2010: Budapest.
p. CD edition.
IV.198. Voet, E., S. Daggumati, G. Luyckx, I. De Baere, W. Van Paepegem, and J. Degriek, Evaluation of local
strain distribution in a satin weave composite using fibre bragg gratings, in Proceedings of the 14th European
Conference on Composite Materials (ECCM-14). 2010: Budapest. p. CD edition.
IV.199. Takeda, N., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Hybrid effects on the interply composites
reinforced with carbon fibre and stretched polypropylene, in Proceedings of the 14th European Conference on
Composite Materials (ECCM-14). 2010: Budapest. p. CD edition.
IV.200. Laine, B., R. Arbter, C. Binetruy, L. Bizet, J. Bréard, J.M. Beraud, C. Demaria, A. Endruweit, P.
Ermanni, F. Gommer, S. Hasanovic, F. Klunker, S. Lavachy, A. Long, S.V. Lomov, V. Michaud, G. Morren,
P. Henrat, E. Ruiz, H. Sol, F. Trochu, B. Verleye, M. Wietgrefe, G. Ziegmann, A. Vautrin, W. Wu, and P.
Beauchene, Experimental determination of textile permeability: a benchmark exercise, in 10th International
Conference on Flow Processes in Composite Materials (FPCM-10). 2010: Ascona, Switzerland. p. CD edition.
IV.201. Lomov, S.V., L. Beyers, L. Gorbatikh, I. Verpoest, V. Koissin, Z. Kotanjac, and M. Karahan,
Permeability and compressibility of CNT-CNF grafted textile reinforcement, in 10th International Conference
on Flow Processes in Composite Materials (FPCM-10). 2010: Ascona, Switzerland. p. CD edition.
IV.202. Laine, B., B. Beauchêne, P. Boisse, G. Hivet, S.V. Lomov, M. Hirsekorn, and P. Badel, Permeability of
woven fabrics: analytical and numerical predictions, in 10th International Conference on Flow Processes in
Composite Materials (FPCM-10). 2010: Ascona, Switzerland. p. CD edition.
IV.203. Fabich, B., I. Taketa, L. Gorbatikh, S.V. Lomov, S. Janetzko, T. Gries, and I. Verpoest, Toughness
improvement in hybrid composites made of carbon fibre reinforced polypropylene and self-reinforced
polypropylene, in Proceedings of the 10th International Vonference on Textile Composites (TexComp-10), C.
Binetruy and F. Boussu, Editors. 2010. p. 3-11.
IV.204. Xu, J., S.V. Lomov, I. Verpoest, S. Daggumati, W. Van Paepegem, J. Degriek, and M. Olave, FE-
Modeling of Damage of Twill Carbon/Epoxy Composite on Meso-Scale, Materials Characterization and
Experimental Verification, in Proceedings of the 10th International Vonference on Textile Composites
(TexComp-10), C. Binetruy and F. Boussu, Editors. 2010. p. 44-52.
IV.205. Gorbatikh, L., N. De Greef, Y. Ding, D.S. Ivanov, A. Godara, L. Mezzo, S.V. Lomov, and I. Verpoest,
Effect of carbon nanotubes on damage initiation in carbon fiber/epoxy and glass fiber/epoxy composites in
Proceedings of the 10th International Vonference on Textile Composites (TexComp-10), C. Binetruy and F.
Boussu, Editors. 2010. p. 173-180.
IV.206. Koissin, V., Z. Kotanjac, S.V. Lomov, L. Gorbatikh, L. Warnet, and R. Akkerman, Deformability of a
textile reinforcement modified with nanofibres, in Proceedings of the 10th International Vonference on Textile
Composites (TexComp-10), C. Binetruy and F. Boussu, Editors. 2010. p. 181-186.
IV.207. Daggumati, S., E. Voet, W. Van Paepegem, J. Degriek, T. Praet, B. Verhegghe, J. Xu, S.V. Lomov, and I.
Verpoest, Influence of the internal yarn nesting (shifting) on the local structural response of a satin weave
composite - an experimental and numerical overview, in Proceedings of the 10th International Vonference on
Textile Composites (TexComp-10), C. Binetruy and F. Boussu, Editors. 2010. p. 238-247.
IV.208. Vanclooster, K., S.V. Lomov, and I. Verpoest, Inter-ply and tool-ply friction measurement of woven
reinforced thermoplastic composites at forming conditions, in Proceedings of the 10th International
Vonference on Textile Composites (TexComp-10), C. Binetruy and F. Boussu, Editors. 2010. p. 381-388.
IV.209. Lomov, S.V., V. Carvelli, and I. Verpoest, Correlations between damage initiation thresholds in textile
composites and fatigue life limits, in Proceedings of the 10th International Vonference on Textile Composites
(TexComp-10), C. Binetruy and F. Boussu, Editors. 2010. p. 475-481.
IV.210. Koissin, V., S.V. Lomov, and I. Verpoest, FE modelling of a structurally stitched multilayer composite,
in Proceedings of the 10th International Vonference on Textile Composites (TexComp-10), C. Binetruy and F.
Boussu, Editors. 2010. p. 498-504
IV.211. Lomov, S.V., A.E. Bogdanovich, M. Karahan, D. Mungalov, and I. Verpoest, Internal structure,
mechanical poperties and dmage bhaviour of non-crimp 3D orthogonal woven composites, in Proceedings of
the 3rdWorld Conference on 3D Fabrics and Their Applications, Wuhan, PR China 20-21 April 2011, X.
Chen, J. Hearle, and W. Xu, Editors. 2011, World Academic Union (World Academic Press): Liverpool.
IV.212. Lomov, S.V., A.E. Bogdanovich, N. Takeda, and J. Xu. Inherent carbon fibre stiffenning as seen in
textile reinforced composites. Proceedings of the 5th International Conference on Composites Testing and
Model Identification (CompTest - 5) 2011 [cited 02.06.2011]; Available from:
http://lmafsrv1.epfl.ch/CompTest2011/02-Tuesday/Session7/
Curriculum Vitae and Bibliography S. V. Lomov 32
IV.213. Ivanov, D.S., C. Vangestel, S.V. Lomov, and I. Verpoest, In-situ measurements of fabric thickness
evolution during draping and compressibility of sheared fabrics, in Proceedings of the ESAFORM-14
conference, Belfast. 2011, CD edition.
IV.214. Vanclooster, K., A. Eshghyar, and S.V. Lomov, Biaxial extension of knitted steel fibre fabrics, in
Proceedings of the ESAFORM-14 conference, Belfast. 2011. p. CD edition.
IV.215. Lomov, S.V., D.S. Ivanov, L. Gorbatikh, and I. Verpoest. Damage initiation and development in textile
composites: spanning nano – micro – meso – macro scales. in: Proceedings of UITAM Conference. 2011
[cited 02.06.2011]; Available from: http://www.reef.ufl.edu/iutam/..
IV.216. Ivanov, D.S., S.V. Lomov, and I. Verpoest, Finite element modelling of inter-ply delamination and intra-
yarn cracking in textile laminates, in Proceedings of 32nd SAMPE-Europe SEICO Conference, Paris. 2011. p.
CD edition.
IV.217. Lomov, S.V., L. Gorbatikh, and I. Verpoest, Compressibility of carbon woven fabric with CNT/CNF
grown on the fibres, in Proceedings of TechTextil Symposium, Frankfurt. 2011. CD edition
IV.218. Carvelli, V., J. Pazmino, S.V. Lomov, A.E. Bogdanovich, D. Mungalov, and I. Verpoest, Fatigue
behavior of a 3D braided carbon/epoxy composite, in Proceedings of 18th International Conference on
Composite Materials (ICCM-18). 2011: Jeju, Korea. CD edition
IV.219. Gorbatikh, L., T. Li, N. De Greef, S.V. Lomov, and I. Verpoest, Suppression of damage development in
carbon fiber/epoxy composites with carbon nanotubes, in Proceedings of 18th International Conference on
Composite Materials (ICCM-18). 2011: Jeju, Korea. CD edition
IV.220. Gorbatikh, L., S.V. Lomov, and I. Verpoest, Mechanics of intra-hierarchical interactions and its potential
in design of tough materials, in Proceedings of 18th International Conference on Composite Materials (ICCM-
18). 2011: Jeju, Korea. CD edition
IV.221. Lomov, S.V., A.E. Bogdanovich, M. Karahan, D. Mungalov, and I. Verpoest, Mechanical behaviour of
non-crimp 3D woven carbon/epoxy composite under in-plane tensile loading, in Proceedings of 18th
International Conference on Composite Materials (ICCM-18). 2011: Jeju, Korea. CD edition
IV.222. Shishkina, O., Y. Zhu, L. Gorbatikh, S.V. Lomov, and I. Verpoest, Applicability of an inclusion-based
homogenisation approach to modelling of balsa-like porous materials, in Proceedings of 18th International
Conference on Composite Materials (ICCM-18). 2011: Jeju, Korea. CD edition
IV.223. Lomov, S.V., L. Gorbatikh, I. Verpoest, and V. Carvelli, Damage initiation thresholds in textile
composites and fatigue life limits, in Proceedings of the 6th. Technical Conference of SAMPE Europe
(SETEC-11). 2011: Leiden. 59-66
IV.224. Gorbatikh, L., S.V. Lomov, and I. Verpoest, Surpression of damage development in carbon fibre/epoxy
composites with carbon nanotubes, in Proceedings of the 6th. Technical Conference of SAMPE Europe
(SETEC-11). 2011: Leiden. 481-488
IV.225. Pazmino, J., V. Carvelli, S.V. Lomov, A.E. Bogdanovich, D.D. Mungalov, and I. Verpoest, Mechanical
properties of a 3D braided carbon/epoxy composite, in Proceeding of the 20th AIMETA Congress of
Theoretical and Applied Mechanics. 2011: Bologna, CD edition
IV.226. De Greef, N., L. Gorbatikh, A. Godara, L. Mezzo, S.V. Lomov, and I. Verpoest, Delay of the damage
initiation and development in woven carbon/epoxy composite with nanotubes in the matrix, in Proceedings of
ECCOMAS: the 3rd Thematic Conference on Mechanical Response of Composites 2011: Hannover. p. CD
Edition
IV.227. Lomov, S.V., A.E. Bogdanovich, M. Karahan, D. Mungalov, and I. Verpoest, Internal structure,
mechanical poperties and dmage bhaviour of non-crimp 3D orthogonal woven composites, in Proceedings of
the 3rdWorld Conference on 3D Fabrics and Their Applications, Wuhan, PR China 20-21 April 2011, X.
Chen, J. Hearle, and W. Xu, Editors. 2011, World Academic Union (World Academic Press): Liverpool.
IV.228. Bedogni, E., D.S. Ivanov, S.V. Lomov, A. Pirondi, M. Vettori, and I. Verpoest, Creating finite element
model of 3D woven fabrics and composites: semi-authomated solution of interpenetration problem, in 15th
European Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic edition, s.p
IV.229. Kurashiki, T., N. Watanabe, M. Matsushima, M. Zako, S.V. Lomov, and I. Verpoest, Effects of stitching
parameters on damage development for non-crimp fabric composites under tensile loading, in 15th European
Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic edition, s.p.
IV.230. Vanaerschot, A., B.N. Cox, M. Blacklock, G. Kerckhofs, M. Wevers, S.V. Lomov, and D. Vandepitte,
Statistical description of the internal geometry of a polymer textile composite using micro-computed
tomography, in 15th European Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic
edition, s.p.
IV.231. Olave, M., L. Aretxabaleta, D. Vandepitte, and S.V. Lomov, Modeling of nesting effect on the
delaminated surface for woven structures, in 15th European Conference on Composite Materials (ECCM-15).
2012: Venice. p. electronic edition, s.p.
Curriculum Vitae and Bibliography S. V. Lomov 33
IV.232. Carvelli, V., J. Pazmino, S.V. Lomov, and I. Verpoest, A non-crimp 3d orthogonal weave e-glass
composite reinforcement: deformability properties, in 15th European Conference on Composite Materials
(ECCM-15). 2012: Venice. p. electronic edition, s.p.
IV.233. Ivanov, S.G., D.S. Ivanov, S.V. Lomov, I. Verpoest, F. Veyet, and F. Boussu, Meso-FE models of tight
3D woven structures, in 15th European Conference on Composite Materials (ECCM-15). 2012: Venice. p.
electronic edition, s.p.
IV.234. Ivanov, D.S., C. Van Gestel, S.V. Lomov, and I. Verpoest, Local compressibility of draped woven
fabrics, in 15th European Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic
edition, s.p.
IV.235. Aravand, M.A., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Evolution of carbon nano-tube dispersion in
preparation of a fiber reinforced epoxy-based composite: from a cnt masterbatch to a composite, in 15th
European Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic edition, s.p.
IV.236. Gorbatikh, L., A. Haesch, T. Clarkson, J. Ivens, S.V. Lomov, and I. Verpoest, On localization of carbon
nanotubes in woven glass fiber/epoxy composites and its effect on tensile properties, in 15th European
Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic edition, s.p.
IV.237. Lomov, S.V., L. Gorbatikh, and I. Verpoest, Compression behaviour of fibre bundles with grafted carbon
nanotubes, in 15th European Conference on Composite Materials (ECCM-15). 2012: Venice. p. electronic
edition, s.p.
IV.238. De Greef, J., Y. Shen, C. Hahn, S.V. Lomov, D. Roose, B. Verleye, and I. Verpoest, Efficient generation
of the voxel description of textile geometries for the computation of the permeability, in Flow Processes in
Composite Materials (FPCM-11), Proceedings, P.A. Kelly and S. Bickerton, Editors. 2012: Aukland. p. 60-67.
IV.239. Lomov, S.V., L. Gorbatikh, and I. Verpoest, Modeling compression of a random assembly of carbon
nanotubes, in 8th European Solid Mechanics Conference (ESMC-8), G.A. Holzapfel and R.W. Ogden, Editors.
2012: Graz. p. electronic edition.
IV.240. Pazmino, J., V. Carvelli, S.V. Lomov, and I. Verpoest, Shear behavior of a non-crimp 3D orthogonal
weave E-glass composite reinforcement, in 8th European Solid Mechanics Conference (ESMC-8), G.A.
Holzapfel and R.W. Ogden, Editors. 2012: Graz. p. electronic edition
IV.241. Lomov, S.V., Bedogni, E., Ivanov, D.S., Ivanov, S.G., Verpoest, I., 2012. Difficulties in meso-FE
analysis of 3D woven composites and possible solutions, 4th World Conference on 3D Fabrics and Their
Applications, Aachen, p. electronic edition.
IV.242. Pazmino, J., Carvelli, V., Lomov, S.V., Verpoest, I., 2012. Meso-scale analysis of the deformability of a
non-crimp 3D orthogonal weave E-glass composite reinforcement, 4th World Conference on 3D Fabrics and
Their Applications, Aachen, p. electronic edition.
IV.243. Lomov, S.V., Gorbatikh, L., Verpoest, I., 2012. Damage thresholds in tension of textile composites,
Proceedings of Durability of Composite Systems (Duracosys-2012), Brussels, p. electronic edition
IV.244. Barburski, M., S.V. Lomov, and I. Verpoest, Compression behaviour of glass fibre knitted and woven
fabrics, in International Glass Fiber Symposia 2012 2012: Aachen.
IV.245. Jain, A., M. Hack, I. Verpoest, S.V. Lomov, W. Van Paepegem, and I. Seyfarth, Fatigue evaluation of
composite materials - overview and industrial applications, in 39. Tagung AK Betriebsfestigkeit, Werkstoffe
und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit 2012, DVM: Paderborn. p. 339-354.
IV.246. Aravand, M.A., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Effect of carbon nano-tube agglomeration on
electrical conductivity of epoxy nano-composites, in 7th International Conference on NANOSTRUCTURED
POLYMERS AND NANOCOMPOSITES. 2012: Prague. p. s.p.
IV.247. Vanaerschot, A., B. N. Cox, S. V. Lomov and D. Vandepitte 2012. Mechanical property evaluation of
polymer textile composites by multi-scale modelling based on internal geometry variability. Proceedings of
International Conference on Noise and Vibration Engineering (ISMA2012-USD2012). Leuven, 5053-5064
IV.248. Vanaerschot, A., M. Olave, S. V. Lomov and D. Vandepitte 2012. A stochastic multi-scale framework for
textile composites to evaluate the stiffness tensor. Proceedings of the 14th AIAA Non-Deterministic
Approaches conference. Honolulu.
IV.249. Vanaerschot, A., B. N. Cox, S. V. Lomov and D. Vandepitte 2012. Stiffness evaluation of textile
composites by multi-scale modelling based on internal geometry variability. Abstract Book of 10th World
Congress on Computational Mechanics (WCCM-10). San Paulo.
IV.250. Abdin Y, Lomov SV, Jain A, van Lenthe H, Verpoest I. Geometrical characterization & micro-structural
modelling of short steel fiber reinforced composites. In: Thomsen OT, Sorensen BF, Berggreen C, eds. 6th
International Conference on Composites Testing and Model Identification (CompTest-6). Aalborg 2013:149-
50.
IV.251. Jain A, Lomov SV, Abdin Y, Verpoest I, Van Paepegem W. Pseudo-grain discretization and full mori
tanaka formulation for random heterogeneous media: predictive abilities for stresses in individual inclusions
and the matrix. In: Thomsen OT, Sorensen BF, Berggreen C, eds. 6th International Conference on Composites
Testing and Model Identification (CompTest-6). Aalborg 2013:175-6.
Curriculum Vitae and Bibliography S. V. Lomov 34
IV.252. Romanov VS, Gorbatikh L, Lomov SV, Verpoest I. Validation of simulated unidirectional composites
microstructure: statistical equivalence to real fibre arrangements. In: Thomsen OT, Sorensen BF, Berggreen C,
eds. 6th International Conference on Composites Testing and Model Identification (CompTest-6). Aalborg
2013:29-30.
IV.253. Tabatabaei SA, Lomov SV, Verpoest I. Embedded element method in meso-finite element modeling of
textile composites. In: Thomsen OT, Sorensen BF, Berggreen C, eds. 6th International Conference on
Composites Testing and Model Identification (CompTest-6). Aalborg 2013:25-6.
IV.254. Van Paepegem W, De Baere I, Daggumati S, Hochard C, Xu J, Lomov SV, et al. Stress-strain analysis of
a carbon pps during and after fatigue loading conditions. In: Thomsen OT, Sorensen BF, Berggreen C, eds. 6th
International Conference on Composites Testing and Model Identification (CompTest-6). Aalborg 2013:43-4.
IV.255. Carvelli V, Lomov SV, Pazmino J, Verpoest I. Deformability of 3D woven orthogonal non-crimp glass
reinforcements. Proceedings SAMPE-USA conference. Long Beach, CA 2013:s.p., electronic edition.
IV.256. Vanaerschot A, Vandepitte D, Lomov SV, Cox BN. Stiffness evaluation of polymer textile composites
subjected to internal geometry variability. Proceedings SAMPE-USA conference. Long Beach, CA 2013:s.p.,
electronic edition.
IV.257. Harjkova, G., M. Barburski, S.V. Lomov, O. Kononova, and I. Verpoest, Analysis of knitted fabric
geometrical parameters using x-ray microtomography. Proceedings of the 13th AUTEX Conference, Dresden,
2013: p. electronic edition, s.p.
IV.258. Harjkova, G., M. Barburski, S.V. Lomov, and O. Kononova, Micro-ct analysis of glass knitted fabric
structure. Proceedings of the conference "Engineering for rural development", Elgava, Latvia, 2013: p.
electronic edition, s.p.
IV.259. Jain, A., et al., Micromechanics and fatigue life simulation of random fibre reinforced composites.
Proceedings of the NAFEMS Congress, 2013: p. electronic edition, s.p.
IV.260. Harjkova, G., M. Barburski, S.V. Lomov, O. Kononova, A. Krasnikovs, and I. Verpoest, Micro-CT usage
for knitted fabric structure recognition. Proceedings of the 1st International Conference on Tomography of
Materials and Structures (ICTMS-2013), Ghent, July 1-5, 2013: electronic edition, s.p.
IV.261. Aravand, M.A., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Phase separated epoxy/pom matrix for
carbon fibre reinforeced composites, in The 19th International Conference on Composite Materials (ICCM-
19), July 28 - August 2, Montreal. 2013. 710-715.
IV.262. Barburski, M., S.V. Lomov, K. Vanclooster, and I. Verpoest, Drapeability of glass and steel fibres knitted
fabrics, in The 19th International Conference on Composite Materials (ICCM-19), July 28 - August 2,
Montreal. 2013. 6837-6844.
IV.263. Li, X., M. Jones, S.R. Hallett, and M. Wisnom, Modelling the effect of Gaps and Overlaps in Automated
Fibre Placement (AFP) manufactured laminates, in The 19th International Conference on Composite
Materials (ICCM-19), July 28 - August 2, Montreal. 2013. 151-159.
IV.264. Lomov, S.V., I. Verpoest, J. Cichosz, C. Hahn, D.S. Ivanov, and B. Verleye, Open data formats and
scripting in integrated meso-level textile composite simulations, in The 19th International Conference on
Composite Materials (ICCM-19), July 28 - August 2, Montreal. 2013. 7262-7267.
IV.265. Pazmino, J., V. Carvelli, and S.V. Lomov, Shaping analysis of a non-crimp 3d orthogonal weave E-glass
composite reinforcement, in The 19th International Conference on Composite Materials (ICCM-19), July 28 -
August 2, Montreal. 2013. 7401-7407.
IV.266. Romanov, V., L. Gorbatikh, S.V. Lomov, and I. Verpoest, A novel approach to modelling of fiber
reinforced composites with carbon nanotubes, in The 19th International Conference on Composite Materials
(ICCM-19), July 28 - August 2, Montreal. 2013. 2865-2872.
IV.267. Shishkina, O., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Modeling of elastic properties of the cell wall
material in nanoclay-reinforced foams, in The 19th International Conference on Composite Materials (ICCM-
19), July 28 - August 2, Montreal. 2013. 3607-3615.
IV.268. Siegfried, M., C. Tola, M. Claes, S.V. Lomov, I. Verpoest, and L. Gorbatikh, Compression after impact
and fracture toughness of carbon fibre/epoxy composites modified with carbon nanotubes, in The 19th
International Conference on Composite Materials (ICCM-19), July 28 - August 2, Montreal. 2013. 929-936.
IV.269. Romanov, V., S.V. Lomov, L. Gorbatikh, and I. Verpoest, Modelling carbon nanotube agglomerates in
fiber reinforced composites, in Proceedings Composites Week @ Leuven. 2013: Leuven. electronic edition, s.p.
IV.270. Romanov, V., S.V. Lomov, L. Gorbatikh, and I. Verpoest, The effect of CNT growth on stress distribution
in unidirectional fiber composites, in Proceedings Composites Week @ Leuven. 2013: Leuven. electronic
edition, s.p.
IV.271. Shishkina, O., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Multi-level modeling of the elastic properties
of cellular nanocomposites, in Proceedings Composites Week @ Leuven. 2013: Leuven. electronic edition, s.p.
IV.272. Abdin, Y., S.V. Lomov, A. Jain, and I. Verpoest, A mean-field based approach for micro-mechanical
modelling of short wavy reinforced composites, in Proceedings of the 11th International Conference on Textile
Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
Curriculum Vitae and Bibliography S. V. Lomov 35
IV.273. Barburski, M., W. Crijns, S.V. Lomov, and I. Verpoest, Deformation analysis of knitted fabrics by using
digital image correlation, in Proceedings of the 11th International Conference on Textile Composites
(TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.274. Barburski, M., S.V. Lomov, and I. Verpoest, Complex deformation of knits, in Proceedings of the 11th
International Conference on Textile Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.275. Bogdanovich, A.E. and S.V. Lomov, Non-hookean behavior of carbon fiber textile composites, in
Proceedings of the 11th International Conference on Textile Composites (TexComp-11). 2013: Leuven.
electronic edition, s.p.
IV.276. Hahn, C., E. Winterstein, I. Straumit, S.V. Lomov, and R. Hinterhölzl, A simulation approach of
permeability determination, in Proceedings of the 11th International Conference on Textile Composites
(TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.277. Harjkova, G., M. Barburski, S.V. Lomov, I. Verpoest, and O. Kononova, Micro-CT based geometry
recognition of glass knitted fabric reinforced polymer laminates, in Proceedings of the 11th International
Conference on Textile Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.278. Ivanov, S.G., L. Gorbatikh, S.V. Lomov, and I. Verpoest, Textile composites in tension: in situ
observation of damage development, in Proceedings of the 11th International Conference on Textile
Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.279. Jain, A., S.V. Lomov, Y. Abdin, W. Van Paepegem, S. Straesser, and I. Verpoest, Model for partially
debonded inclusions in the framework of mean-field homogenization, in Proceedings of the 11th International
Conference on Textile Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.280. Lomov, S.V., Compressibility of fibrous and nano reinforcements: experimental observations and
modelling, in Proceedings of the 11th International Conference on Textile Composites (TexComp-11). 2013:
Leuven. electronic edition, s.p.
IV.281. Pazmino, J., V. Carvelli, and S.V. Lomov, Experimental forming of a non-crimp 3D orthogonal weave e-
glass composite reinforcement, in Proceedings of the 11th International Conference on Textile Composites
(TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.282. Sabuncuoglu, B., S. Orlova, L. Gorbatikh, S.V. Lomov, and I. Verpoest, Micro-mechanical analysis of
stresses in steel fibre reinforced composites, in Proceedings of the 11th International Conference on Textile
Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.283. Sacevičienė, V., M. Barburski, S.V. Lomov, and E. Strazdienė, Experimental technique for evaluation of
textile structural characteristics, in Proceedings of the 11th International Conference on Textile Composites
(TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.284. Straumit, I., S.V. Lomov, I. Verpoest, and M. Wevers, Determination of local fibers orientation in
composite material from micro-CT data, in Proceedings of the 11th International Conference on Textile
Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.285. Tabatabaei, S.A., S.V. Lomov, and I. Verpoest, Investigation of the contact algorithm as a solution for
interpenetration problem in meso-fem of textile composites, in Proceedings of the 11th International
Conference on Textile Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.286. Vallons, K., G. Adolphs, P. Lucas, S.V. Lomov, and I. Verpoest, The influence of fabric type on the
behaviour of glass-fibre NCF composites, in Proceedings of the 11th International Conference on Textile
Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.287. Vanaerschot, A., B.N. Cox, S.V. Lomov, and D. Vandepitte, Generation of stochastic macroscopic
structures using experimental data of random geometry, in Proceedings of the 11th International Conference
on Textile Composites (TexComp-11). 2013: Leuven. electronic edition, s.p.
IV.288. Vanaerschot A, Cox BN, Lomov SV, Vandepitte D. Stochastic characterisation of the in-plane tow
centroid in textile composites to quantify the multi-scale variation in geometry. Proceedings of the IUTAM
Symposium on Multiscale Modeling and Uncertainty Quantification of Materials and Structures Santorini
(Greece). 2014.
IV.289. Lomov, S.V., L. Gorbatikh, and I. Verpoest, Compressibility of random assemblies of carbon nanotubes.
Proceedings of COMPO-2014 Nanocomposites & Biocomposites, Rehovot, Israel, 2014: p. electronic edition.
IV.290. Ivanov, S.G., L. Gorbatikh, and S.V. Lomov, Compression after impact of textile composites
with thermoplastic matrices. Proceedings of the Mechanics of Composite Materials Conference, Riga, 2014.
IV.291. Lomov, S.V. and I. Verpoest, Chinese puzzles of textile composites properties. Proceedings of the 16th
European Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.292. Pazmino, J., S. Mathieu, V. Carvelli, P. Boisse, and S.V. Lomov, Hyperelastic model for forming
simulations of a noncrimp 3d orthogonal weave e-glass composite reinforcement. Proceedings of the 16th
European Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.293. Barburski, M., X. Zhang, I. Straumit, and S.V. Lomov, X-ray analysis of sheared textile composite
reinforcement. Proceedings of the 16th European Conference on Composite Materials (ECCM-16), Seville,
2014: electronic edition, s.p.
Curriculum Vitae and Bibliography S. V. Lomov 36
IV.294. Sabuncuoglu, B., L. Gorbatikh, and S.V. Lomov, The effect of nano-reinforced fiber/matrix interphase on
stresses in steel fiber composites. Proceedings of the 16th European Conference on Composite Materials
(ECCM-16), Seville, 2014: electronic edition, s.p.
IV.295. Kersani, M., S.V. Lomov, A. Van Vuure, A. Bouabdallah, and I. Verpoest, Damage analysis based on the
correlation between acoustic emission and E modulus degradation in flax/epoxy quasi unidirectional woven
laminates Proceedings of the 16th European Conference on Composite Materials (ECCM-16), Seville, 2014:
electronic edition, s.p.
IV.296. Jain, A., J.M. Veas, S.V. Lomov, Y. Abdin, S. Straesser, W. Van Paepegem, and I. Verpoest, Master SN
curve method for short fiber composites: theory and experimental validation. Proceedings of the 16th
European Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.297. Vanaerschot, A., B. Cox, S.V. Lomov, and D. Vandepitte, Stochastic multi-scale modelling of short- and
long-range effects in textile composites based on experimental data. Proceedings of the 16th European
Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.298. Swery, E.E., R. Meier, S.V. Lomov, C. Hahn, P. Kelly, and I. Straumit, Verification of FlowTex solver
using Ansys CFX - Examining the permeability prediction method on a range of textile architecture models.
Proceedings of the 16th European Conference on Composite Materials (ECCM-16), Seville, 2014: electronic
edition, s.p.
IV.299. Straumit, I., S.V. Lomov, F. Bensadoun, and M. Wevers, Automatic transformation of 3d micro-ct images
into finite element models with anisotropic local properties. Proceedings of the 16th European Conference on
Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.300. Romanov, V., S.V. Lomov, I. Verpoest, and L. Gorbatikh, Modelling carbon nanotube “bridges” in
unidirectional fiber composites and understanding their effect on micro-scale stress concentrations.
Proceedings of the 16th European Conference on Composite Materials (ECCM-16), Seville, 2014: electronic
edition, s.p.
IV.301. Tabatabaei, S.A., E. Bedogni, D.S. Ivanov, and S.V. Lomov, Meso-scale damage modelling of textile
composite using the embedded element technique and contact algorithm. Proceedings of the 16th European
Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.302. Ivanov, S.G., L. Gorbatikh, and S.V. Lomov, Interlaminar fracture behaviour of textile composites with
thermoplastic matrices. Proceedings of the 16th European Conference on Composite Materials (ECCM-16),
Seville, 2014: electronic edition, s.p.
IV.303. Abdin, Y., S.V. Lomov, A. Jain, and I. Verpoest, Micro-mechanical modelling and validation of
progressive elasto-plastic damage of short wavy steel fibre composites. Proceedings of the 16th European
Conference on Composite Materials (ECCM-16), Seville, 2014: electronic edition, s.p.
IV.304. Straumit, I., Lomov, S. V., and Wevers, M., 2014. Analysis and segmentation of a three-dimensional X-
ray computed tomography image of a textile composite. In: Zhang, Y. J., and Tavares, J. M. R. S., (Eds.),
Lecture Notes in Computer Science, Volume 8641 - Computational Modeling of Objects Presented in Images.
Fundamentals, Methods, and Applications 4th International Conference, CompIMAGE 2014. Springer
International Publishing, Pittsburg, pp. 133-142.
IV.305. Bensadoun, F., M. Barburski, I. Straumit, N.L.Q. Tran, C. Fuentes, J. Zenina, O. Shishkina, G. Pyka, I.
Verpoest, and A.W. Van Vuure, Challenges of X-Ray Tomography Technique on Natural Fibre-Based
Composites, in 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, Prague.
2014. electronic edition, s.p.
IV.306. Tabatabaei, S.A., Y. Swolfs, H. Wu, and S.V. Lomov, Multi-scale modelling of spatial variability in
textile composites: uncertainty quantification based on experimental data of internal geometry, in Proceedings
of the Texcomp-12 Conference. 2015: Raleigh, NC, USA, May 26-29. electronic edition s.p.
IV.307. Vanaerschot, A., B.N. Cox, S.V. Lomov, and D. Vandepitte, Multi-scale modelling of spatial variability
in textile composites: uncertainty quantification based on experimental data of internal geometry, in
Proceedings of the Texcomp-12 Conference. 2015: Raleigh, NC, USA, May 26-29. electronic edition s.p.
IV.308. Vallons, K., R. Drozdzak, M. Charret, and S.V. Lomov, Damage development in woven glass fibre
composites with tough thermoset matrix, in Proceedings of the Texcomp-12 Conference. 2015: Raleigh, NC,
USA, May 26-29. electronic edition s.p.
IV.309. Carvelli, V., J. Pazmino, S. Mathieu, P. Boisse, and S.V. Lomov, Experimental and numerical
investigation of a non-crimp 3D orthogonal weave E-glass composite reinforcement forming process, in
Proceedings of the Texcomp-12 Conference. 2015: Raleigh, NC, USA, May 26-29. electronic edition s.p.
IV.310. Straumit, I., B. Plank, C. Hahn, E. Winterstein, S.V. Lomov, and M. Wevers, Acoustic emission cluster
analysis for 3D orthogonal woven composites, in Proceedings of the Texcomp-12 Conference. 2015: Raleigh,
NC, USA, May 26-29. electronic edition s.p.
IV.311. Tabatabaei, S.A. and S.V. Lomov, Meso-FE modelling of 3D fabrics using embedded element method, in
Proceedings of the 6th World Conference on 3D Fabrics and their Applications. 2015: Raleigh, NC, USA,
May 26-28. electronic edition s.p.
Curriculum Vitae and Bibliography S. V. Lomov 37
IV.312. Li, L. and S.V. Lomov, Acoustic emission cluster analysis for 3D orthogonal woven composites, in
Proceedings of the 6th World Conference on 3D Fabrics and their Applications. 2015: Raleigh, NC, USA,
May 26-28. electronic edition s.p.
IV.313. Aravand, M.A., O. Shishkina, I. Straumit, A.H. Liotta, S.S. Wicks, B.L. Wardle, S.V. Lomov, and L.
Gorbatikh, Effect of “fuzzy” fiber morphology on the internal geometry of textile composites characterized by
micro-computed tomography, in 20th International Conference on Composite Materials (ICCM-20),
Copenhagen. 2015. electronic edition.
IV.314. Jain, A., Y. Abdin, S. Strasser, W. Van Paepegem, I. Verpoest, and S.V. Lomov, Master SN curve
approach- a hybrid multiscale approach to fatigue simulation of short fiber composites, in 20th International
Conference on Composite Materials (ICCM-20), Copenhagen. 2015. electronic edition.
IV.315. Lomov, S.V., Y. Abdin, and A. Jain, Mori-Tanaka methods for micromechanics of random fibre
composites, in 20th International Conference on Composite Materials (ICCM-20), Copenhagen. 2015.
electronic edition.
IV.316. Matveeva, A., V. Romanov, S.V. Lomov, and L. Gorbatikh, Application of the embedded element
technique to the modelling of nano-engineered fiber-reinforced composites, in 20th International Conference
on Composite Materials (ICCM-20), Copenhagen. 2015. electronic edition.
IV.317. Olave, M., I. Vara, H. Usabiaga, L. Aretxabaleta, S.V. Lomov, and D. Vandepitte, Does unit cell size play
a role? An overview of mechanical properties of woven laminates, in 20th International Conference on
Composite Materials (ICCM-20), Copenhagen. 2015. electronic edition.
IV.318. Romanov, V., S.V. Lomov, and L. Gorbatikh, Is it possible to eliminate micro-scale stress concentrations
in composites by nano engineering with CNTs?, in 20th International Conference on Composite Materials
(ICCM-20), Copenhagen. 2015. electronic edition.
IV.319. Straumit, I., F. Bensadoun, S.V. Lomov, and M. Wevers, Effective properties of unidirectional flax/epoxy
composites with twisted yarns, in 20th International Conference on Composite Materials (ICCM-20),
Copenhagen. 2015. electronic edition.
IV.320. Tabatabaei, S.A. and S.V. Lomov, Embedded element method in meso finite element modelling of textile
composites: “a gallery”, in 20th International Conference on Composite Materials (ICCM-20), Copenhagen.
2015. electronic edition.
IV.321. Vallons, K., R. Drozdzak, M. Charret, and S.V. Lomov, Exploratory study on the behaviour of
glass/PDCPD composites, in 20th International Conference on Composite Materials (ICCM-20), Copenhagen.
2015. electronic edition.
IV.322.
V. Own dissertations
V.1. Lomov S.V., Research into mathematical modelling and practical construction of ballistic and shock
protective structures, Candidate of Technical Science (corresponds to PhD), 1985
V.2. Lomov S.V., Mathematical Prediction of the Structure and Mechanical Properties of Woven Fabrics for
Technical Usage, Doctor of Technical Science (Doctor Habille, Doctor of State) in Textile Materials Science,
1995
VII. Patents and software
VI.1. Zamanov, M.B., Lomov, S.V., Svyatenko, M.V. Shtut, I.I. Gondola for an aerostat, Russia, 21.11.91, #
20266238
VI.2. Gusakov, A.V., Lomov, S.V. Software for automatic design of multilayered fabrics CETKA, Russia,
29.07.98, 980465
VI.3. Gusakov, A.V., Lomov, S.V., Mogilny A.N. Software for automatic design of multilayered fabrics
CETKA v 3.2, Russia, 05.03.98, 990118
VI.4. Venderevskaya, O.S., Lomov, S.V., Kalashnikova N.M., Truevtsev N.N. Database of folk fabrics, Russia,
01.03.2001, #20001620022 (claim 20001620013, 09.01.2001)
VI.5. Mezzo, L., A. Godara, O. Rochez, F. Luizi, A. Warrier, I. Verpoest, and S.V. Lomov, Method for the
preparation of a reinforced thermoset polymer composite, PCT/EP2009/059247. 2009
