Upload
pr3m4n
View
8
Download
0
Embed Size (px)
DESCRIPTION
telecom
Citation preview
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
Huawei Confidential
Security Level:
英文标题 :40-47pt 副标题 :26-30pt字体颜色 : 反白内部使用字体 :
FrutigerNext LT Medium外部使用字体 : Arial
中文标题 :35-47pt字体 : 黑体
副标题 :24-28pt字体颜色 : 反白
字体 : 细黑体
23/4/26
Brick Yang (00126012)2009-05-05
DBS3900 Installation guide (PNG only)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 2
1.1. Site type and Installation Site type and Installation ScenarioScenario
2.2. Hardware instructionHardware instruction
3.3. Installation instructionInstallation instruction
4.4. ConclusionConclusion
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
Site type and Installation Site type and Installation ScenarioScenario 131 sites in total DBS3900 will be used for all of the sites S444 will be used for all of the sites The sites will be installed indoor or out door Indoor sites power supplied by PS48300 Outdoor sites power supplied by APM30 All RRU will be put on the tower
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
1.1. Site type and Installation Site type and Installation ScenarioScenario
2.2. Hardware instructionHardware instruction
3.3. Installation instructionInstallation instruction
4.4. ConclusionConclusion
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
BBU3900
There are three main function modules which relate to hardware installation in BBU front face:
UELP GTMU UPEU
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6
UELP—E1/T1 lighting protection unit
Dip switch
Setting of DIP Bit Description 1 2 3 4
SW1 OFF OFF OFF OFF 120Ω E1 (Used in this project)
ON OFF ON OFF 75Ω E1
Dip switch of UELP (Important)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7
GTMU--The GSM Transmission, Timing, and Management Unit
Dip switch of GTMU (Important)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8
UPEU--Universal Power and Environment Interface Unit
The UPEU performs the following functions: Converting -48 V DC to +12 V DC that is applicable to the boards Providing two RS485 signals and eight dry contact alarms Providing reverse connection protection for power cable connectors
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9
120 ohm E1 cable
E1 No. Label signal Color Pin
1
CHAN 0 TXT1
TT0 white 20
TR0 grey 19
CHAN 0 RXR1
RT0 white 2
RR0 blue 1
2
CHAN 1 TXT2
TT1 red 22
TR1 blue 21
CHAN 1 RXR2
RT1 white 4
RR1 orange 3
3
CHAN 2 TXT3
TT2 red 24
TR2 orange 23
CHAN 2 RXR3
RT2 white 6
RR2 green 5
4
CHAN 3 TXT4
TT3 red 26
TR3 green 25
CHAN 3 RXR4
RT3 white 8
RR3 brown 7
Pin assignment of the E1 cable
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10
RRU3004
RRU3004 BOX 2 RRU in the rackRRU module
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11
RRU special cablesRRU Interconnect jumper
Signal cable between the CPRI ports on cascaded RRUs
RRU power cable
CPRI optical cable
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 12
APM30--Advanced power module 30
Maximum DC power output: –48 V/90 A
Backup power for a short period: batteries of –48 V (24 Ah)
Space for user equipment: 7 U
APM30 with battery cabinet
APM30 inside appearance
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 13
power distribution unit in APM30
To RRU1(20A)
To RRU2(20A)
To RRU3(20A)
To DPD32(50A)
To EMUA(5A) To Tx IDU
(10A)
To BBU 3036(10A)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 14
PMU DIP Switch Default all OFF. Set it to—11000000(on--1;off--0)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 15
PS48300/1800-x6 Maximum DC power
output: –48 V/300 A
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 16
1.1. Site type and Installation Site type and Installation ScenarioScenario
2.2. Hardware instructionHardware instruction
3.3. Installation instructionInstallation instruction
4.4. ConclusionConclusion
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 17
Installation instructionInstallation instruction
• Outdoor ScenarioOutdoor Scenario
• Indoor ScenarioIndoor Scenario
• Swap ScenarioSwap Scenario
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 18
Outdoor Scenario
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 19
APM30 inside cables connection description
1. Will take on site photo in PNG2. Battery installation please refer to the related
document
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 20
RRU power cables and fibers will be fixed on the cable tray by cable fixing accessory
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 21
RRU Connection of S4 cell
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 22
Real connection example of S4 cell--bottom
Jumper cable need connect to ANT TR/RXA in the right side
PGND to grounding bar on the tower
RRU interconnect jumper
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 23
Real connection example of S4 cell--front
RRU inter connect jumper
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 24
Introduce sensor and alarm materialsAlarm cable—RJ45 Line cable:
Notes: Crossover line cable will be used at here. The pin assignment should be same with the upside showing. Alarm panel may use DDF box or something else in the same function.
Pin assignment of EXT_ALM port
RJ45 pin RJ45 Pin/ Color BBU Recommend pin assignment
1 1 Orange/White SW-IN1+2 2 Orange SW-IN1-( GND)3 3 Green/white SW-IN2+4 4 Blue SW-IN3-( GND)5 5 Blue/White SW-IN3+6 6 Green SW-IN2-( GND)7 7 Brown/White SW-IN4+8 8 Brown SW-IN4-( GND)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 25
Alarm Function of UPEU
RJ45 Line cables
Interface Line Cables Color Alarm name Alarm plan
EXT-ALM0
Orange/orange white boolean 9 Extend alarmExtend alarmGreen/Green white boolean 10 Extend alarmExtend alarmBlue/Blue white boolean 11 Extend alarmExtend alarmBrown/Brown white boolean 12 Extend alarmExtend alarm
EXT-ALM1
Orange/orange white boolean 13 Extend alarmExtend alarmGreen/Green white boolean 14 Extend alarmExtend alarmBlue/Blue white boolean 15 Extend alarmExtend alarmBrown/Brown white boolean 16 Extend alarmExtend alarm
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 26
Realize Extend alarm by UPEU
Physics connection
RJ45 line cable
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 27
Installation instructionInstallation instruction
• Outdoor ScenarioOutdoor Scenario
• Indoor ScenarioIndoor Scenario
• Swap ScenarioSwap Scenario
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 28 V1.2
Indoor Scenario
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 29
Indoor Scenario description
The differences between indoor and outdoor BTS are: 1. The equipments which under the tower are installed in the BTS
room2. RRU power Cables and fibers will go through switch room window
to RRU and antenna3. Overhead cabling will be used4. Rectifier is PS48300. BBU and RRU will power supplied by PS483005. BBU and DDF box will be installed in one separate 19” rack6. Battery will be install in special battery rack and connect to
PS48300
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 30
Indoor Scenario description
The similarities between indoor and outdoor BTS are:
1. All of the installation on the tower is same2. The alarm plan is same Dip switch for BBU and UELP is same requirement
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 31
Detail cable connection description in the room Will on site take photo to describe
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 32
Installation instructionInstallation instruction
• Outdoor ScenarioOutdoor Scenario
• Indoor ScenarioIndoor Scenario
• Swap ScenarioSwap Scenario
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 33
Swap ScenarioSwap Scenario
Swap scenario is basic same with installation new site:
1. Fellow layout, install all of the under tower equipments whatever indoor or outdoor
2. Install RRU, RRU power cables and fibers3. Install new antenna system4. If the plan is use current site’s old antenna Open the connectors between antennas and ½” jumper cables. Use new ½” jumper cables connect the RRU to antenna
The detail plan will be made with customer on site
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 34
Key point for Swap ScenarioKey point for Swap Scenario
1. Need pay more attention to the alive network. Do not shut down, power off any running equipment without customer’s permission.
2. Need confirm whether the old antenna will be used after swap
3. Need confirm how about the old feed cables and antenna after swap
4. Need confirm the swap time schedule
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 35
1.1. Site type and Installation Site type and Installation ScenarioScenario
2.2. Hardware instructionHardware instruction
3.3. Installation instructionInstallation instruction
4.4. ConclusionConclusion
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 36
ConclusionConclusion
Good quality and customer’s satisfaction is built by us. Please double confirm the fellows items before leave the site:
1. Check the site with hardware quality installation standard
2. GTMU, UELP, PMU dip switch 3. APM30 inside cable connection4. Alarm cables connection5. Antenna azimuth, down tilt angle
Thank youwww.huawei.com