Upload
duongdien
View
214
Download
0
Embed Size (px)
Citation preview
jzdr Département fédéral de l'économie, de la formation et de la recherche DEFR
Secrétariat d'Etat à l'économie SECO Service d'accréditation suisse SAS
Registre STS Numéro d’accréditation : STS 0090
10.06.2015 / S qua/aeh 0090stsvz franz 1/4
1) Portée de l’accréditation de type A (fixe) 2) Portée de l’accréditation de type B (flexible) 3) Portée de l’accréditation de type C (flexible)
Pour la définition de la flexibilité voir document SAS 741
Norme internationale : ISO/CEI 17025:2005
Norme suisse : SN EN ISO/CEI 17025:2005
INFRALAB SA Ch. de Praz-Roussy 3 1032 Romanel-sur-Lausanne
Responsable : Jean-Louis Cuénoud
Responsable SM : Robert Braber
Téléphone : +41 21 732 13 37
E-Mail : mailto:[email protected]
Internet : http://www.infralab.ch
Première accréditation : 25.10.1994
Accréditation actuelle : 14.02.2015 au 13.02.2020
Registre voir : www.sas.admin.ch (Organismes accrédités)
Portée de l’accréditation dès 10.06.2015
Laboratoire d’essai pour l'analyse des sols, graves, granulats, liants et enrobés bitumineux, bétons, essais in situ et auscultation des chaussées et autres surfaces de circulation
Produits, matériaux, domaine Principe de mesure 2)
(caractéristiques, étendue de mesure, genres d’essais)
Méthodes d’essais, remarques (normes nationales et internationales, méthodes internes)
Béton (durci) Confection et conservation des éprouvettes pour essais de résis-tance
SN EN 12390-2 resp. SIA 262.252
Résistance à la compression des éprouvettes
SN EN 12390-3 resp. SIA 262.253
Détermination de la masse volu-mique du béton durci
SN EN 12390-7 resp. SIA 262.257
Béton et mortier frais Echantillonnage de béton frais SN EN 12350-1 resp. SIA 262.231
Essai d'affaissement SN EN 12350-2 resp. SIA 262.232
Détermination de l'indice de ser-rage
SN EN 12350-4 resp. SIA 262.234
jzdr Département fédéral de l'économie, de la formation et de la recherche DEFR
Secrétariat d'Etat à l'économie SECO Service d'accréditation suisse SAS
Registre STS Numéro d’accréditation : STS 0090
10.06.2015 / S qua/aeh 0090stsvz franz 2/4
1) Portée de l’accréditation de type A (fixe) 2) Portée de l’accréditation de type B (flexible) 3) Portée de l’accréditation de type C (flexible)
Pour la définition de la flexibilité voir document SAS 741
Produits, matériaux, domaine Principe de mesure 2)
(caractéristiques, étendue de mesure, genres d’essais)
Méthodes d’essais, remarques (normes nationales et internationales, méthodes internes)
Béton et mortier frais Essai d'étalement à la table à chocs
SN EN 12350-5 resp. SIA 262.235
Détermination de la masse volu-mique
SN EN 12350-6 resp. SIA 262.236
Détermination de la teneur en air - Méthode de la compressibilité
SN EN 12350-7 resp. SIA 262.237
Granulats (-minéraux), sables, graviers, gravillons, pierres con-cassées, graves, filler, matériaux non traités, etc.
Détermination de la résistance des granulats à la fragmentation
SN EN 1097-2 resp. SN 670 903-2
Détermination de la teneur en eau de granulats par séchage en étuve ventilée
SN EN 1097-5 resp. SN 670 903-5
Détermination de la masse volu-mique réelle et du coefficient d'ab-sorption d'eau de granulats
SN EN 1097-6 resp. SN 670 903-6
Méthodes d'échantillonnage de granulats
SN EN 932-1 resp. SN 670 901-1
Détermination de la granularité de granulats. Analyse granulomé-trique par tamisage
SN EN 933-1 resp. SN 670 902-1
Détermination du pourcentage de surfaces cassées dans les gravil-lons
SN EN 933-5 resp. SN 670 902-5
Détermination du coefficient d'écoulement de granulats
SN EN 933-6 resp. SN 670 902-6
Sols, tout-venant Détermination des limites de con-sistance (limites de liquidité et de plasticité au rouleau de sols, mé-thode à 3 points)
SN 670 345
Méthode d'essai de détermination en laboratoire de la masse volu-mique de référence et de la teneur en eau (Mélanges traités et mé-langes non traités aux liants hy-drauliques) - compactage proctor
SN EN 13286-2 resp. SN 670 330-2
Sols, sous-sol et roches: essais in situ
Essai de plaque EV et ME (sols) SN 670 317
jzdr Département fédéral de l'économie, de la formation et de la recherche DEFR
Secrétariat d'Etat à l'économie SECO Service d'accréditation suisse SAS
Registre STS Numéro d’accréditation : STS 0090
10.06.2015 / S qua/aeh 0090stsvz franz 3/4
1) Portée de l’accréditation de type A (fixe) 2) Portée de l’accréditation de type B (flexible) 3) Portée de l’accréditation de type C (flexible)
Pour la définition de la flexibilité voir document SAS 741
Produits, matériaux, domaine Principe de mesure 2)
(caractéristiques, étendue de mesure, genres d’essais)
Méthodes d’essais, remarques (normes nationales et internationales, méthodes internes)
Liants bitumineux Détermination de l'indice de péné-tration selon la norme: Spécifica-tions des bitumes routiers
SN EN 12591 resp. SN 670 202-NA
Récupération des bitumes: évapo-rateur rotatif
SN EN 12697-3 resp. SN 670 403-NA
Détermination de la pénétrabilité à l’aiguille
SN EN 1426 resp. SN 670 511
Détermination du point de ramol-lissement Méthode Bille et Anneau
SN EN 1427 resp. SN 670 512
Echantillonnage des liants bitumi-neux
SN EN 58 resp. SN 670 501
Enrobés bitumineux Détermination de la teneur en liants selon Rouen
Méthode LPC "projet de mode opératoire - Rouen", procédure modifiée
Détermination de la liaison entre les couches (selon Leutner)
SN 670 461
Détermination de la teneur en liant soluble d'enrobés
SN EN 12697-1 resp. SN 670 401
Détermination de la granulométrie d'enrobés à chaud
SN EN 12697-2 resp. SN 670 402
Détermination de la résistance à la traction indirecte des éprouvettes bitumineuses
SN EN 12697-23 resp. SN 670 423
Prélèvements d’échantillons de mélanges bitumineux
SN EN 12697-27 resp. SN 670 427
Confection d'éprouvettes par com-pacteur à impact
SN EN 12697-30 resp. SN 670 430
Essai Marshall SN EN 12697-34 resp. SN 670 434
Détermination de la masse volu-mique réelle (MVR) des matériaux bitumineux (mélange hydrocar-boné à chaud)
SN EN 12697-5 resp. SN 670 405
Détermination de la masse volu-mique apparente des éprouvettes bitumineuses
SN EN 12697-6 resp. SN 670 406
Détermination des pourcentages de vides caractéristiques des éprouvettes bitumineuses
SN EN 12697-8 resp. SN 670 408
jzdr Département fédéral de l'économie, de la formation et de la recherche DEFR
Secrétariat d'Etat à l'économie SECO Service d'accréditation suisse SAS
Registre STS Numéro d’accréditation : STS 0090
10.06.2015 / S qua/aeh 0090stsvz franz 4/4
1) Portée de l’accréditation de type A (fixe) 2) Portée de l’accréditation de type B (flexible) 3) Portée de l’accréditation de type C (flexible)
Pour la définition de la flexibilité voir document SAS 741
Produits, matériaux, domaine Principe de mesure 2)
(caractéristiques, étendue de mesure, genres d’essais)
Méthodes d’essais, remarques (normes nationales et internationales, méthodes internes)
Construction routière et étanchéi-tés: essais in situ
Mesure de profils transversaux et longitudinaux dans le domaine de longueurs d'onde correspondant à l'uni et à la mégatexture (ARAN - automatic road analyzer) - Carac-téristiques de surface des routes et aérodromes
EN 13036-6,
Détermination des indices d'uni transversal (ARAN - automatic road analyzer) - Caractéristiques de surface des routes et aéro-dromes
EN 13036-8,
Mesure de déflexion Falling Weight Deflectometer – Calibration Guide: protocol 3 + 10 CROW Report D11-07 - national information and technology plat-form for infrastructure, traffic, transport and public space, NL
Relevé d’état et appréciation en valeur d'indice (ARAN - automatic road analyzer) - Gestion de l’entre-tien des chaussées (GEC)
SN 640 925
Mesurage de la profondeur de ma-crotexture de la surface d'un revê-tement à l'aide d'une technique vo-lumétrique à la tache - Caractéristiques de surface de routes et aéroports
SN EN 13036-1 resp. SN 640 511-1
Détermination de la profondeur moyenne de la texture (ISO 13473-1:1997) (ARAN - automatic road analyzer) - Caractérisation de la texture d'un revêtement de chaussée à partir de relevés de profil
SN EN ISO 13473-1 :2004 resp. SN 640 511-11
Mesure de la planéité - Caractéris-tiques de surface des chaussées (ARAN – Automatic Road Analy-zer)
SNR 640 516
* / * / * / * / *
Eidgenössisches Departement für Wirtschaft, Bildung und Forschung WBF
Staatssekretariat für Wirtschaft SECO Schweizerische Akkreditierungsstelle SAS
STS-Verzeichnis Akkreditierungsnummer: STS 0090
10.06.2015 / S qua/aeh 0090stsvz deutsch 1/4
1) Geltungsbereich Typ A (fix) 2) Geltungsbereich Typ B (flexibel) 3) Geltungsbereich Typ C (flexibel)
Definition der Flexibilität siehe SAS-Dokument 741
Internationale Norm: ISO/IEC 17025:2005
Schweizer Norm: SN EN ISO/IEC 17025:2005
INFRALAB SA Ch de Praz-Roussy 3 1032 Romanel-sur-Lausanne
Leiter: Jean-Louis Cuénoud
MS-Verantwortlicher: Robert Braber
Telefon: +41 21 732 13 37
E-Mail: mailto:[email protected]
Internet: http://www.infralab.ch
Erstmals akkreditiert: 25.10.1994
Aktuelle Akkreditierung: 14.02.2015 bis 13.02.2020
Verzeichnis siehe: www.sas.admin.ch (Akkreditierte Stellen)
Geltungsbereich der Akkreditierung ab 10.06.2015
Prüfstelle für die Analyse von Böden, Gesteinskörnungen, bitumenhaltigen Bindemitteln und bituminösem Mischgut, Beton, in situ Prüfungen und Zustandserfassung von Strassen und anderen Verkehrsflächen
Produkte- oder Stoffgruppe, Tätigkeitsgebiet
Messprinzip 2)
(Merkmale, Messbereiche, Prüfungsarten)
Prüfverfahren, Bemerkungen (nationale, internationale Normen, eigene Verfahren)
(Fest-) Beton Herstellung und Lagerung von Probekörpern für Festigkeits-prüfungen
SN EN 12390-2 bzw. SIA 262.252
Druckfestigkeit von Probekör-pern
SN EN 12390-3 bzw. SIA 262.253
Bestimmung der Dichte von Festbeton
SN EN 12390-7 bzw. SIA 262.257
Frischbeton und Frischmörtel Probenahme von Frischbeton SN EN 12350-1 bzw. SIA 262.231
Bestimmung des Setzmasses SN EN 12350-2 bzw. SIA 262.232
Bestimmung des Ver-dichtungsmasses
SN EN 12350-4 bzw. SIA 262.234
Bestimmung des Ausbreit-masses
SN EN 12350-5 bzw. SIA 262.235
Eidgenössisches Departement für Wirtschaft, Bildung und Forschung WBF
Staatssekretariat für Wirtschaft SECO Schweizerische Akkreditierungsstelle SAS
STS-Verzeichnis Akkreditierungsnummer: STS 0090
10.06.2015 / S qua/aeh 0090stsvz deutsch 2/4
1) Geltungsbereich Typ A (fix) 2) Geltungsbereich Typ B (flexibel) 3) Geltungsbereich Typ C (flexibel)
Definition der Flexibilität siehe SAS-Dokument 741
Produkte- oder Stoffgruppe, Tätigkeitsgebiet
Messprinzip 2)
(Merkmale, Messbereiche, Prüfungsarten)
Prüfverfahren, Bemerkungen (nationale, internationale Normen, eigene Verfahren)
Frischbeton und Frischmörtel Bestimmung der Frischbeton-rohdichte
SN EN 12350-6 bzw. SIA 262.236
Bestimmung der Luftgehalte; Druckverfahren
SN EN 12350-7 bzw. SIA 262.237
Gesteinskörnungen, minerali-sche Baustoffe, Sand, Kies, Splitt, Schotter, Kiessand, Filler, ungebundene Gemische, usw.
Bestimmung des Widerstandes von Gesteinskörnungen gegen Zertrümmerung
SN EN 1097-2 bzw. SN 670 903-2
Bestimmung des Wassergehal-tes von Gesteinskörnungen durch Ofentrocknung
SN EN 1097-5 bzw. SN 670 903-5
Bestimmung der Rohdichte und der Wasseraufnahme von Ge-steinskörnungen
SN EN 1097-6 bzw. SN 670 903-6
Probenahmeverfahren von Gesteinskörnungen
SN EN 932-1 bzw. SN 670 901-1
Bestimmung der Korngrös-senverteilung von Gesteinskör-nungen; Siebverfahren
SN EN 933-1 bzw.
SN 670 902-1
Bestimmung des Anteils von gebrochenen Körnern in groben Gesteinskörnungen
SN EN 933-5 bzw. SN 670 902-5
Bestimmung der Fliesskoeffi-zienten von Gesteinskörnungen
SN EN 933-6 bzw. SN 670 902-6
Lockergestein, Böden, Wand-kies
Bestimmung der Konsistenz-grenzen (Fliess- und Ausroll-grenzen von Böden, 3-Punkt Methode)
SN 670 345
Laborprüfverfahren für die Trok-kendichte und den Wassergeh-alt (ungebundene und hydrau-lisch gebundene Gemische); Proctorversuch
SN EN 13286-2 bzw. SN 670 330-2
Böden, Untergrund und Fels: in situ Prüfungen
Plattendruckversuch EV und ME (Böden)
SN 670 317
Bitumenhaltige Bindemittel Bestimmung des Penetrati-onsindex gemäss Norm: Anfor-derungen an Strassenbaubitu-men
SN EN 12591 bzw. SN 670 202-NA
Rückgewinnung des Bindemit-tels: Rotationsverdampfer
SN EN 12697-3 bzw. SN 610 403-NA
Bestimmung der Nadelpenetra-tion
SN EN 1426 bzw. SN 670 511
Eidgenössisches Departement für Wirtschaft, Bildung und Forschung WBF
Staatssekretariat für Wirtschaft SECO Schweizerische Akkreditierungsstelle SAS
STS-Verzeichnis Akkreditierungsnummer: STS 0090
10.06.2015 / S qua/aeh 0090stsvz deutsch 3/4
1) Geltungsbereich Typ A (fix) 2) Geltungsbereich Typ B (flexibel) 3) Geltungsbereich Typ C (flexibel)
Definition der Flexibilität siehe SAS-Dokument 741
Produkte- oder Stoffgruppe, Tätigkeitsgebiet
Messprinzip 2)
(Merkmale, Messbereiche, Prüfungsarten)
Prüfverfahren, Bemerkungen (nationale, internationale Normen, eigene Verfahren)
Bitumenhaltige Bindemittel Bestimmung des Erweichungs-punktes Ring und Kugel-Verfah-ren
SN EN 1427 bzw. SN 670 512
Probenahme bituminöser Bin-demittel
SN EN 58 bzw. SN 670 501
Bituminöses Mischgut Bestimmen des löslichen Binde-mittelanteils gemäss Rouen
Méthode LPC "projet de mode opératoire - Rouen", geändertes Verfahren
Bestimmung des Schichtenver-bunds (nach Leutner)
SN 670 461
Bestimmung des löslichen Bin-demittelgehaltes
SN EN 12697-1 bzw. SN 670 401
Bestimmung der Korngrös-senverteilung von Heissasphalt
SN EN 12697-2 bzw. SN 670 402
Bestimmung der indirekten Zug-festigkeit von Asphalt-Probekör-pern
SN EN 12697-23 bzw. SN 670 423
Probennahme von Heissasphalt SN EN 12697-27 bzw. SN 670 427
Probenvorbereitung, Marshall-Verdichtungsgerät
SN EN 12697-30 bzw. SN 670 430
Marshall Prüfung SN EN 12697-34 bzw. SN 670 434
Bestimmung der Rohdichte von Heissasphalt
SN EN 12697-5 bzw. SN 670 405
Bestimmung der Raumdichte von Asphalt-Probekörpern
SN EN 12697-6 bzw. SN 670 406
Bestimmung von volumetri-schen Charakteristiken von As-phalt-Probekörpern
SN EN 12697-8 bzw. SN 670 408
Strassenbau und Abdichtungen: in situ Prüfungen
Bestimmung der Quer- und Längsprofile in den Wellenlän-gen der Ebenheit und der Me-gatextur (ARAN - automatic road analyzer) - Oberflächenei-genschaften von Strassen und Flugplätzen
EN 13036-6
Bestimmung der Parameter zur Ermittlung der Breitenuneben-heit (ARAN - automatic road analyzer) - Oberflächeneigen-schaften von Strassen und Flugplätzen
EN 13036-8
Strassenbau und Abdichtungen: in situ Prüfungen
Deflektionsmessung Falling Weight Deflectometer – Calibration Guide, protocol 3 +
Eidgenössisches Departement für Wirtschaft, Bildung und Forschung WBF
Staatssekretariat für Wirtschaft SECO Schweizerische Akkreditierungsstelle SAS
STS-Verzeichnis Akkreditierungsnummer: STS 0090
10.06.2015 / S qua/aeh 0090stsvz deutsch 4/4
1) Geltungsbereich Typ A (fix) 2) Geltungsbereich Typ B (flexibel) 3) Geltungsbereich Typ C (flexibel)
Definition der Flexibilität siehe SAS-Dokument 741
Produkte- oder Stoffgruppe, Tätigkeitsgebiet
Messprinzip 2)
(Merkmale, Messbereiche, Prüfungsarten)
Prüfverfahren, Bemerkungen (nationale, internationale Normen, eigene Verfahren) 10 CROW Report D11-07 - na-tional information and technol-ogy platform for infrastructure, traffic, transport and public space, NL
Zustandserhebung und Index-bewertung (ARAN - automatic road analyzer) - Erhaltungsma-nagement der Fahrbahnen (EMF)
SN 640 925
Messung der Makrotexturtiefe der Fahrbahnoberfläche mit Hilfe eines volumetrischen Ver-fahrens - Oberflächeneigen-schaften von Strassen und Flugplätzen
SN EN 13036-1 bzw. SN 640 511-1
Bestimmung der mittleren Pro-filtiefe (ISO 13473-1:1997) (ARAN - automatic road analy-zer) - Charakterisierung der Textur von Fahrbahnbelägen unter Verwendung von Oberflä-chenprofilen
SN EN ISO 13473-1 :2004 resp. SN 640 511-11
Eigenschaften der Fahrbahn-oberflächen (ARAN Automatic Road Analyzer) - Ebenheit
SNR 640 516
* / * / * / * / *
Federal Department of Economic Affairs, Education and Research EAER
State Secretariat for Economic Affairs SECO Swiss Accreditation Service SAS
STS Directory Accreditation number: STS 0090
10.06.2015 / S qua/aeh 0090stsvz engl 1/4
1) Scope of accreditation type A (fix) 2) Scope of accreditation type B (flexible) 3) Scope of accreditation type C (flexible)
Definition of flexibilty see SAS Document 741
International standard: ISO/IEC 17025:2005
Swiss standard: SN EN ISO/IEC 17025:2005
INFRALAB SA Ch. de Praz-Roussy 3 1032 Romanel-sur-Lausanne
Head: Jean-Louis Cuénoud
Responsible for MS: Robert Braber
Telephone: +41 21 732 13 37
E-Mail: mailto:[email protected]
Internet: http://www.infralab.ch
Initial accreditation: 25.10.1994
Current accreditation: 14.02.2015 to 13.02.2020
Scope of accreditation see:
www.sas.admin.ch (Accredited bodies)
Scope of accreditation as from 10.06.2015
Testing laboratory for soils, aggregates, bituminous binders and mixtures, concretes, in situ tests and survey of roads and other circulated area
Group of products or materials, field of activity
Principle of measurement 2) (characteristics, measuring ranges, type of test)
Test methods, remarks (national, international standards, in-house test methods)
(Hardened) concrete Making and curing specimens for strength tests
SN EN 12390-2 resp. SIA 262.252
Compressive Strength of test specimens
SN EN 12390-3 resp. SIA 262.253
Determination of Density of hardened concrete
SN EN 12390-7 resp. SIA 262.257
Fresh concrete and mortar Sampling fresh concrete SN EN 12350-1 resp. SIA 262.231
Slump test SN EN 12350-2 resp. SIA 262.232
Determination of degree of compactability
SN EN 12350-4 resp. SIA 262.234
Flow table test SN EN 12350-5 resp. SIA 262.235
Federal Department of Economic Affairs, Education and Research EAER
State Secretariat for Economic Affairs SECO Swiss Accreditation Service SAS
STS Directory Accreditation number: STS 0090
10.06.2015 / S qua/aeh 0090stsvz engl 2/4
1) Scope of accreditation type A (fix) 2) Scope of accreditation type B (flexible) 3) Scope of accreditation type C (flexible)
Definition of flexibilty see SAS Document 741
Group of products or materials, field of activity
Principle of measurement 2) (characteristics, measuring ranges, type of test)
Test methods, remarks (national, international standards, in-house test methods)
Fresh concrete and mortar Determination of Density SN EN 12350-6 resp. SIA 262.236
Determination of air content; Pressure methods
SN EN 12350-7 resp. SIA 262.237
(Mineral-) aggregates, sand, gravel, coarse aggregates, crushed stones, filler, unbound materials, etc.
Determination of resistance of aggregates to fragmentation
SN EN 1097-2 resp. SN 670 903-2
Determination of the water con-tent of aggregates by drying in a ventilated oven
SN EN 1097-5 resp. SN 670 903-5
Determination of particle den-sity and water absorption of ag-gregates
SN EN 1097-6 resp. SN 670 903-6
Methods for sampling aggre-gates
SN EN 932-1 resp. SN 670 901-1
Determination of particle size distribution of aggregates - Sieving Method
SN EN 933-1 resp. SN 670 902-1
Determination of percentage of crushed and broken surfaces in coarse aggregate particles
SN EN 933-5 resp. SN 670 902-5
Determination of flow coefficient of aggregates
SN EN 933-6 resp. SN 670 902-6
Soft rocks, soils, ground Determination of the con-sistency limits (liquid limit and plastic limit of soils, 3 point method)
SN 670 345
Test methods for the determina-tion of the laboratory reference density and water content (un-bound and hydraulically bound mixtures). Proctor compaction
SN EN 13286-2 resp. SN 670 330-2
Soils, underground and rocks: in situ tests
EV and ME-plate bearing test (soils)
SN 670 317
Bituminous binders Determination of the penetra-tion index PI according to norm: Specifications for paving grade bitumen
SN EN 12591 resp. SN 670 202-NA
Bitumen recovery: Rotary eva-porator
SN EN 12697-3 resp. SN 670 403-NA
Determination of needle pene-tration
SN EN 1426 resp. SN 670 511
Federal Department of Economic Affairs, Education and Research EAER
State Secretariat for Economic Affairs SECO Swiss Accreditation Service SAS
STS Directory Accreditation number: STS 0090
10.06.2015 / S qua/aeh 0090stsvz engl 3/4
1) Scope of accreditation type A (fix) 2) Scope of accreditation type B (flexible) 3) Scope of accreditation type C (flexible)
Definition of flexibilty see SAS Document 741
Group of products or materials, field of activity
Principle of measurement 2) (characteristics, measuring ranges, type of test)
Test methods, remarks (national, international standards, in-house test methods)
Bituminous binders Determination of softening point Ring and Ball method
SN EN 1427 resp. SN 670 512
Sampling bituminous binders SN EN 58 resp. SN 670 501
Bituminous mixtures Determination of the soluble binder part according to Rouen
Méthode LPC "projet de mode opératoire - Rouen", modified procedure
Determination of layers adhe-sion (Leutner)
SN 670 461
Soluble binder content determi-nation of mix asphalt
SN EN 12697-1 resp. SN 670 401
Determination of particle size distribution of hot mix asphalt
SN EN 12697-2 resp. SN 670 402
Determination of the indirect tensile strength of bituminous specimens
SN EN 12697-23 resp. SN 670 423
Sampling bituminous mixtures SN EN 12697-27 resp. SN 670 427
Specimen preparation by im-pact compactor
SN EN 12697-30 resp. SN 670 430
Marshall test SN EN 12697-34 resp. SN 670 434
Determination of the maximum density of hot mix asphalt
SN EN 12697-5 resp. SN 670 405
Determination of bulk density of bituminous specimens
SN EN 12697-6 resp. SN 670 406
Determination of void character-istics of bituminous specimens
SN EN 12697-8 resp. SN 670 408
Road construction and water-proofing: in situ tests
Measurement of transverse and longitudinal profiles in the even-ness and megatexture wave-length ranges (ARAN - auto-matic road analyzer) - Road and airfield surface characteris-tics
EN 13036-6
Determination of transverse un-evenness indices (ARAN - auto-matic road analyzer) - Road and airfield surface characteris-tics
EN 13036-8
Federal Department of Economic Affairs, Education and Research EAER
State Secretariat for Economic Affairs SECO Swiss Accreditation Service SAS
STS Directory Accreditation number: STS 0090
10.06.2015 / S qua/aeh 0090stsvz engl 4/4
1) Scope of accreditation type A (fix) 2) Scope of accreditation type B (flexible) 3) Scope of accreditation type C (flexible)
Definition of flexibilty see SAS Document 741
Group of products or materials, field of activity
Principle of measurement 2) (characteristics, measuring ranges, type of test)
Test methods, remarks (national, international standards, in-house test methods)
Road construction and water-proofing: in situ tests
Deflexion test Falling Weight Deflectometer – Calibration Guide, protocol 3 + 10 CROW Report D11-07 - na-tional information and technol-ogy platform for infrastructure, traffic, transport and public space, NL
Condition description and index evaluation (ARAN - automatic road analyzer) - Maintenance management of the roadways
SN 640 925
Measurement of pavement sur-face macrotexture depth using a volumetric patch technique - Road and airfield surface char-acteristics
SN EN 13036-1 resp. SN 640 511-1
Determination of Mean Profile Depth (ISO 13473-1:1997) (ARAN - automatic road ana-lyzer) - Characterization of pavement texture by use of sur-face profiles
SN EN ISO 13473-1 :2004 resp. SN 640 511-11
Measurment of the evenness - Pavement surface characteris-tics (ARAN - automatic road an-alyzer)
SNR 640 516
* / * / * / * / *