DITEKs D200 industrial surge protectors are designed to provide protection to AC power systems in the most demanding environments. The D200 incorporates individually fused components for maximum performance and protection. Available in a wide range of voltage configurations, the D200 is an excellent choice for electrical panel protection.

200kA/, 100kA/Mode Surge Protective DeviceGeneral Product Specifications

D200 Series

D200

One DITEK Center1720 Starkey RoadLargo, FL 33771

Product Features

Suitable for use on branch panels and small disconnects

Compact size enables close mounting to the protected panel to minimize wire length andmaximize performance

200,000 Amp peak surge current capacity ensures long service life

Available in 8 voltage configurations Diagnostic LEDs indicates system power, SPD function, alarm and ground status

Dry Contacts Audible Alarm- With test and disable features. Complies with ANSI/IEEE C62.41 and C62.45 Category B and C3 standards

Ten year limited warranty

Specifications

Agency Approvals: UL 1449, 3rd Edition, cULIEEE Location Category: Category B and C3Protector Type: SPD Type 1 (US), Type 2 (Canada)Peak Surge Current: 200kA/Phase, 100kA/ModeShort Circuit Current Rating: 100,000AProtection Modes: See ChartTemperature Range: -40 140F (-40 60C)Maximum Humidity: 95% non-condensingOperating Frequency: 40Hz 400HzHousing: NEMA 4XDimensions: 6.3H x 6.3W x 2.4D

(160mm x 160mm x 61mm)Connection: NPT conduit, watertight fittingsWeight: 2.9lb. (1.3kg)Options: Flush Mount Kit, D200-FMKDimensions: 9.0 x 9.0 Plate (227mm x 227mm)

Document: SPS-100074-001 Rev 3 11-112011 DITEK Corp.

Specification Subject to Change

1-800-753-2345 Direct 1-727-812-5000Technical Support: 1-888-472-6100

www.ditekcorp.com

Industrial Surge Protection

200kA/, 100kA/Mode Surge Protective DeviceGeneral Product Specifications

D200 Series

D200 Surge Protection

One DITEK Center1720 Starkey RoadLargo, FL 33771

1-800-753-2345 Direct 1-727-812-5000Technical Support: 1-888-472-6100

www.ditekcorp.com

Technical Specifications

3000VN/A1800VN/A20kA550V480VAC Three DeltaD200-4803D

2500V2500V1500V1500V20kA 420/840V347/600VAC Three Wye

D200-347/6003Y

840V

320V

320V/640V

150V/320V

150V/300V

150V/300V

MCOV

1800VN/A1200VN/A20kA240VAC Three DeltaD200-2403D

3000V

1200V

600VHL-G 1200V

600V

600V

L-G

N/A

1800V

900V

900V

900V

N-G

6000V

1800V

1000VHL-L 1500V

1000V

1000V

L-LL-N

N/A

1000V

600V/HL 1000V

600V

600V

UL 1449, 3rd Edition Voltage Protection Rating (VPR)

20kA

20kA

20kA

20kA

20kA

UL 3rdEd. In

Rating

600VAC Three DeltaD200-6003D

277/480VAC Three Wye

D200-277/4803YD200-220/3803YD200-230/4003YD200-240/4153Y

120/240VAC Three High Leg Delta

D200-120/240HL

120/208VAC Three Wye

D200-120/2083YD200-127/2203Y

120/240VACSplit

D200-120/2401

ServiceWiring

D200 Series

Industrial Surge Protection

Document: SPS-100074-001 Rev 3 11-112011 DITEK Corp.

Specification Subject to Change

Dimensions: Option Codes: Ordering Example: 6.3H x 6.3W x 2.4D Flush Mount Kit: D200-120/2083Y: D200 for 200kA, (160mm x 160mm x 61mm) D200-FMK 3 Wye for 4W+G, 120/208V system

Conduit fitting: 3/4 threaded NPT

Outdoor Rated Conduit and Nipple

Flush Mount Plate Option