donaldson visokotlačni filteri

8/13/2019 donaldson visokotlani filteri

1/86Hydraulic Filtration 1

High Pressure Filters

www.buydonaldson.com

High Pressure Filters

High pressure filters are

positioned between pumps

and critical components

such as cylinders, motors

and valves. They help protect

these critical components

from catastrophic failure.

Donaldson heavy-duty high

pressure filters are rated

for working pressures up to

6500 psi (44818 kPa). Various

porting sizes and types,

including manifold style, are

available for a wide range

of applications.

Section Index

Max Operating Pressure < 6500 psi (450 bar)

Models arranged from low to maximum flow rates

In-line Cartridge Filters

W331 .......................................................128

HPK02......................................................132

W341 .......................................................138

W440 .......................................................142

FPK02 ......................................................146

W613 .......................................................152

W322 .......................................................156

W350 .......................................................160

HPK03......................................................164

W610 .......................................................170

FPK04 ...................................................... 174

HPK04......................................................180

W621 .......................................................188

W451 .......................................................193

W620 .......................................................197

WS620 .................................................... 202

HPK05..................................................... 207


2/86128 Hydraulic Filtration www.buydonaldson.com

W331Max Flow: 6 gpm (23 lpm)

W331 In-Line Cartridge Filters

Working Pressures to: 3000 psi21,000 kPa210 bar

Rated Static Burst to: 7500 psi51,700 kPa517 bar

Fatigue Pressure Rating: 1500 psi10,000 kPa100 bar

Flow Range to: 6 gpm23 lpm

The W331 in line filter assembly offers all aluminum construction with a positive sealing poppet type bypass for

reliability and zero leakage. Donaldson DT high-performance 4-layer media is offered in five different media grades.

The differential pressure indicator line is designed to work with the wide assortment of bypass valves. Thermal

lockout and surge control are two key features incorporated in many of the differential pressure indicators.

Aluminum head and housing

Compact design for use with servo or proportional valve

Positive sealing poppet for zero leakage

Beta Rating Performance to 5(c)=1000

Porting Size Options SAE-8 O-ring

Assembly Weight 4.25 lbs / 1.9 kg

Replacement Filter Lengths 3.44" / 87.3mm

Standard Bypass Ratings 50 psi / 345 kPa / 3.5 bar No Bypass

Operating Temperatures -45 to 250F (-43 to 121C)

Filter Collapse Ratings 150 psi / 1034 kPa / 10.3 bar (standard) 3000 psi / 20,700 kPa / 206.8 bar (high collapse)

Features


3/86Hydraulic Filtration 1www.buydonaldson.com


Differential Indicators: Indicators are designed to actuate at approximately 80% of bypass valve cracking pressure. It is recommendedthat an indicator with a bypass setting of 100 psid is used with a non-bypass housing.

Surge Control: This optional feature is used to dampen pressure surges or spikes to avoid premature actuation of the indicator. Surgecontrol delays the indicator response.

Thermal Lockout: The Thermal Lockout prevents premature signaling of a bypass condition created by viscous fluid during cold start-ups.Normal indicator actuation capability is resumed once the operating temperature of the fluid reaches approximately 80F / 27C.

Note: The female plug (connector) is to

be furnished by customer.

I

92.08

(3.63)

76.20

(3.00)

38.10

(1.50)

IN OUT

P Indicator

Access Plug for Bypass Valve

(SAE-6 Socket Plug)

175.51

(6.91)Max

124.71

(4.91)

Max

19.05

(.75)

Inlet Port

6.75 (17/64) Thru.

2 Plcs.

56.64

(2.23)

76.20

(3.00)

19.05

(.75)

Square

69.85 (2.75) Require

for Element & Bowl

Removal

Torque Bowl to

20 N.M. (15 lbs-ft) Max.

Outlet Port

4.06

(.16)

Indicator

38.10 (1.50) Max. Visual

49.53 (1.95) Max Electrical

Head - Top View

Assembly - Side View

W331 Specification Illustrations

Plastic Electrical Housings

Aluminum Electrical Housings

Note: The female plug (connector) is tobe furnished by customer.

Indicator Switch

Schematic Wiring Diagram

All dimensions are shown in millimeters [inches]. Applications

High Pressure Circuits In-Plant Systems




High-Performance DT Filter Choices

W331 Components

Performance DataW331 Housing Only

W331 Filter Only W331 High Collapse Filter Only

Flow Rate (gpm)

PressureD

rop

(psid)

PressureD

rop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

W331 Bypass Valve

0 2 4 640

45

50

55

60

50 PSID cracking

0

10

20

30

40

50

60

0 5 10 15 20

0

2

4

6

8

10

0 1 2 3 4 5 6

5m

8m

12m

0

10

20

30

40

50

60

0 5 10 15 20

0

2

4

6

8

10

0 1 2 3 4 5 6

P

ressureD

rop

(kPa)

Flow Rate (lpm)

Pre

ssureD

rop

(psid)

Flow Rate (gpm)

0

10

20

30

40

50

60

0 5 10 15 20

0

2

4

6

8

10

0 1 2 3 4 5 6

PressureDrop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m

14m

Media x(c) = 1000 Length Donaldson Comments

Type Rating based on ISO 16889 in mm Part No.

DT Synteq Synthetic 5 m 3.44 87.3 P572298 AN6235-3A

8 m 3.44 87.3 P572299 AN6235-3A

12 m 3.44 87.3 P572300 AN6235-3A

5 m 3.44 87.3 P572301 AN6235-3A, High collapse

12 m 3.44 87.3 P572302 AN6235-3A, High collapse

Filter Notes All Donaldson W331 filters utilize glass fiber media with an epoxy-based resin system for the ultimate in chemical compatibility.

All Donaldson W331 filters are potted with epoxy-based adhesives.

Standard collapse W331 designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity.

High collapse designs are double wire-backed using stainless steel mesh.

High collapse designs are also potted into machined aluminum endcaps for greater filter integrity in critical applications.

Vitonseals are standard on all Donaldson W331 filters. Vitonis a registered trademark of E. I. DuPont de Nemours and Company.




Housing Ordering Guide

Table 5 (Primary)

Indicator Style and Setting

CODE DP INDICATOR STYLE & SETTING

D Electrical/visual 35 psid

E Electrical/visual 100 psid

G Electrical/visual 35 psid w/TL

J P indicator plug

L Visual indicator 35 psid M Visual indicator 35 psid

w/ TL and surge

N Electrical/visual 35 psid

w/12" 3 wire flying lead

O Visual indicator 100 psid

P Visual indicator 100 psid

w/ TL and surge

R Electrical switch 35 psid

S Electrical/visual 100 psid


T Electrical switch 100 psid

W Electrical/visual 100 psid

w/TL

Y Electrical/visual 35 psid

w/TL and surge

Z Electrical/visual 100 psid

w/TL and surge

TL (thermal lockout)

Table 1

Filter Assembly

CODE DESCRIPTION

W331 Assembly

Table 2

Filter Collapse Options

CODE DESCRIPTION

1 150 psid for housing

w/bypass valve

4 3000 psi for housing

w/o bypass valve

Table 3

Port Size Options

CODE PORT SIZE

O SAE-8 O-ring

Table 4

Bypass Setting Options

CODE BYPASS SETTING

1 Non-bypass

4 50 psid

Note: Use option 1 code only with3000 psid collapse filter.

W331 1 O 4 L N B

TABLE 1 TABLE 2 TABLE 3 TABLE 4 TABLE 5 TABLE 6

Metric Porting Available

Change W331 to G331

Porting code O becomes 1/2"ISO 228 BSPP

Table 5 (Secondary)

Receptacle Options

CODE ELECTRICAL STYLE

B Brad Harrison(5-pin)

H Hirschmann(4-pin)

N None, for visual DPindicator

Table 6

Seal Options

CODE MATERIAL

B Buna-N

V Viton

Filter

Assembly

Service

FilterFilters ordered separately. See previous page for filter options.

LEAD TIME NOTE:

This product is configured with the specifications andfeatures of your choice. Please contact your Donaldsonsales representative for lead time details.

Media Ratings

Western Filter elements have been replaced by

Donaldson DT high-performance cartridges.

WESTERN DONALDSONMEDIA CODE DT MEDIA

03 5m DT Synteq Synthetic



For a complete filter interchange, visit

crossreference.donaldson.com.

METRIC PORTING AVAILABLE

Brad Harrison is a registered trademark of Woodhead Industries, Inc.

Hirschmann is a registered trademark of Richa rd Hirschmann of America Inc.

Buna-Nand Vitonare registered trademarks of E. I. DuPont de Nemours an



Working Pressures to: 2000 psi13,790 kPa

137.9 bar

Rated Static Burst to: 4500 psi 31,030 kPa 310.3 bar

Flow Range to: 20 gpm 75 lpm

HPK02 In-Line Cartridge Filters

Beta Rating Performance to



Head - Top ViewAssembly - Side View

HPK02Max Flow: 20 gpm (75 lpm)

HPK02 Specification Illustrations

All dimensions are shown in inches [millimeters].

HPK02with Visual Service Indicator

HPK02with AC/DC Electrical Service Indicator

Applications


Meets HF2 Specification

Mobile Equipment Power Steering Circuits

Servo Valve Circuits



HPK02 Components



Filter Notes All Donaldson DT filters utilize glass fiber media with an epoxy-based resin system for the ultimate in chemical compatibility.

All Donaldson DT filters are potted with epoxy-based adhesives.

Standard collapse DT designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirtcapacity. High collapse designs are double wire-backed using stainless steel mesh.


Vitonseals are standard on all Donaldson DT filters. Vitonis a registered trademark of E. I. DuPont de Nemours and Company.

Standard Filter Choices

Filter Notes* Utilizes DT Synteq synthetic media Refer to the table in the Technical Reference Guide for fluid compatibility with our filter media.

If filtering petroleum-based oil, filters with seals made of Buna-Nare appropriate for most applications.

If filtering diester, phosphate ester fluids, water glycol, water/oil emulsions, or HWCF over 150F/83C,use filters with seals made of fluorocarbon, such as Viton.

Donaldson "high collapse" filters, with their steel end caps and wire-backed media, are rated towithstand up to 3000 psi/ 20,700 kPa before collapsing.

The fluorocarbon seal/high collapse filters also use epoxy potting and media seam seals for addedchemical compatibility.

Some part numbers are offered with the same beta ratings to maintain customer ordering patterns.

VitonandBuna-Nregistered trademarks of E. I. DuPont de Nemours and Company.

Media x(c) = 1000 Length Donaldson CommentsType Rating based on ISO 16889 in mm Part No.

Synteq Synthetic 5 m 4.37 111 P167180* Fluorocarbon Seal, High Collapse

5 m 8.12 203 P167182* Fluorocarbon Seal, High Collapse

7 m 4.37 111 P169429 Buna-NSeal

7 m 4.37 111 P165041 Buna-N Seal

7 m 8.12 203 P167838 Buna-N Seal

7 m 8.12 203 P165043 Buna-N Seal

9 m 4.37 111 P165006 Buna-N Seal

9 m 8.12 203 P165015 Buna-N Seal

12 m 4.37 111 P167181* Fluorocarbon Seal, High Collapse12 m 8.12 203 P167183* Fluorocarbon Seal, High Collapse

23 m 4.37 111 P165136 Buna-N Seal

23 m 8.12 203 P165138 Buna-N Seal



DT Synteq Synthetic



Housing Choices

Length Part No.

short P167443

long P167452

Port Size Bypass Rating Indicators1 Part No.

Head Choices

SAE-12 O-Ring 50 psi/3.5 bar Visual indicator, left side P167728

SAE-12 O-Ring No bypass Visual indicator, left side P167730

Notes on Indicators1

Donaldson uses the inlet port as the reference point. "Left side," for instance, means that the indicator mounts on theside of the filter head that is on your left when you face the inlet port.

Replacement Indicator Only

Indicator Choices

Part No. Description

P567458Visual/Electrical indicator with thermal lockoutand surge, 35 psid/2.4 bar

P567459

Visual/Electrical indicator, with thermal lockout

and surge 70 psid/4.8 bar

P567456Pop-Up Visual Indicator, with thermal lockoutand surge 35 psid/2.4 bar


P569636 Pop-Up Visual Indicator, 35 psid/2.4 bar


P569638 Visual/Electrical Indicator, 35 psid/2.4 bar


P164315 Visual Indicator, bar style, 35 psid/2.4 bar


P166134 Blanking plate


Indicator Mounting Block


P573495 Mounting Block Assembly

Part No.

Use withBypass ValvePressure of: Description

P569634 50 psi / 3.5 bar

35 psi/2.4 bar indicator kitHirschmann receptacle115 VAC/28 VDC, 2 amps

P569635 90 psi / 6.2 bar


P567986 50 psi / 3.5 bar

35 psi/2.4 bar indicator kit withthermal lockout and surge control,Hirschmann receptacle, 115 VAC/28VDC, 2 amps, 4 pin DIN 43650

P567987 90 psi / 6.2 bar


Part No.


P569632 50 psi / 3.5 bar35 psi/2.4 bar indicator kitauto reset pop-out button


P567988 50 psi / 3.5 bar

35 psi/2.4 bar indicator kitauto reset pop-out button withthermal lockout and surge control

P567989 90 psi / 6.2 bar

70 psi/4.8 bar indicator kit*auto reset pop-out button withthermal lockout and surge control

AC/DC Visual/Electrical Service Indicators

All kits include indicator with mounting block

Visual Service Indicators

Service Indicator Kits



Performance Data


HPK02 Housing Only

0

3

6

9

12

15

0 5 10 15 20 250

20

40

60

80

100

0 20 40 60 80

SAE-12

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

HPK02 Standard 8" Filter Only

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

HPK02 Standard 4" Filter Only

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80



HPK02 Service Parts

Optional MountingBlock Assembly

P573495(Optional Position)

Replacement FilterSee Filter Choice Tables

HousingSee Housing AssemblyChoice Table

Pop Up VisualIndicator

See Option Table(Includes Indicator

O-Ring P161315Fluorocarbon,

Mounting Block& Hardware)

Electrical /Visual Indicator




Blanking Plate P166134Includes O-Ring P161315

Fluorocarbon & Hardware)

SealP167268 Fluorocarbon

Visual Service Indicator

(Includes O-ring P161315Fluorocarbon & Hardware)Max Temp 180F (82C) / 345 kPaP164315 Normal Flow Model

O-Ring(Size 006)P161315 Fluorocarbon

O-Ring(Size 006)

P161315 Fluorocarbon

O-Ring(Size 006)

P161315 Fluorocarbon

Head AssembliesSee Head AssemblyOptions Table

Optional MountingBlock Assembly

P573495(Primary Position)

Pop Up VisualIndicator




Electrical /Visual Indicator










Rated Static Burst to: 7,500 psi51,700 kPa517 bar



Beta Rating Performance to 5(c)=1000

Porting Size Options SAE-12 O-ring

Assembly Weight 7.28": 5.3 lbs / 2.4 kg 10.03": 5.7 lbs / 2.6 kg

Replacement Filter Lengths 5.27" / 133.8mm 8.00" / 203.2mm

Standard Bypass Ratings 50 psi / 345 kPa / 3.5 bar No Bypass

Operating Temperatures -45 to 250F (-43 to 121C)

Filter Collapse Ratings 150 psi / 1034 kPa / 10.3 bar (standard) 3000 psi / 20,700 kPa / 206.8 bar (high collapse)

The W341 in line filter assembly offers all aluminum construction with a positive sealing poppet type bypass for

reliability and zero leakage. Donaldson DT high-performance 4-layer media is offered in four different media grades.

The differential pressure indicator line is designed to work with the wide assortment of bypass valves. Thermal

lockout and surge control are two key features incorporated in many of the differential pressure indicators.

Aluminum head and housing

Compact design for use with servo or proportional valve

Positive sealing poppet for zero leakage

Features










Head - Top View


Inlet Port

54.9(2.16)

Outlet Port

63.5 (2.50) Min. RequiredFor Bowl and Element

Removal

Refer to Model Code(Assembly Length)

63.5(2.50)

IN OUT

V isual- 38.1 Max. (1.50)Electrical- 49.53 Max. (1.95)

P Indicator

.250-20UNC-2B ThdX 12.7 (.50) Min. Thd Depth2 Plcs

101.6(4.00)

19.1(.75)

76.2(3.00)

30.2(1.19)

24.4(.96)




Indicator Switch


All dimensions are shown in millimeters [inches].

Refer to Filter Choices(Assembly Length)

Applications





High-Performance DT Filter ChoicesW341 Components

Filter Notes

All Donaldson DT filters utilize glass fiber mediawith an epoxy-based resin system for theultimate in chemical compatibility.


Standard collapse DT designs are double wire-backed using epoxy-coated steel mesh formaximum pleat support and dirt capacity.

High collapse designs are double wire-backedusing stainless steel mesh.

High collapse designs are also potted intomachined aluminum endcaps for greater filter

integrity in critical applications. Vitonseals are standard on all Donaldson DT

filters. Vitonis a registered trademark of E. I.DuPont de Nemours and Company.

Performance Data

W341 Housing Only

Flow Rate (gpm)

Pressure

Drop(psid)

W341 Bypass Valve

0 4 8 12 16 20

40

45

50

55

60

W341 8" Filter OnlyDT-N, 7.81"/198.3mm

W341 5" High Collapse Filter OnlyDT-N-HC, 5.06"/128.6mm

W341 8" High Collapse Filter OnlyDT-N-HC, 7.81"/198.3mm

0

10

20

30

40

50

60

0 20 40 60

0

2

4

6

8

10

0 5 10 15 20

PressureD

rop(kPa)

Flow Rate (lpm)

PressureD

rop(psid)

Flow Rate (gpm)

W341 5" Filter OnlyDT-N, 5.06"/128.6mm

0

10

20

30

40

50

60

0 10 20 30

2

4

6

8

10

00

2 4 6 8 10

PressureD

rop(k

Pa)

Flow Rate (lpm)

PressureD

rop

(p

sid)

Flow Rate (gpm)

5m

8m

14m

25m

0

10

20

30

40

50

60

0 20 40 60

0

2

4

6

8

10

0 5 10 15 20

PressureD

rop

(kP

a)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m8m

14m

25m

0

10

20

30

40

50

60

0 10

20 30

0

2

4

6

8

10

0 2 4

6 8 10

PressureD

rop

(kP

a)

Flow Rate (lpm)

PressureD

ro

p

(psid)

Flow Rate (gpm)

5m

14m

0

10

20

30

40

50

60

0 20 40 60

0

2

4

6

8

10

0 5 10 15 20

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m14m



DT Synteq Synthetic 5 m 5.27 133.8 P567065 DT-N-1-5UM

8 m 5.27 133.8 P567066 DT-N-1-8UM

12 m 5.27 133.8 P567067 DT-N-1-14UM

23 m 5.27 133.8 P567068 DT-N-1-25UM

5 m 8.00 203.2 P567069 DT-N-2-5UM

8 m 8.00 203.2 P567070 DT-N-2-8UM

12 m 8.00 203.2 P567071 DT-N-2-14UM

23 m 8.00 203.2 P567072 DT-N-2-25UM

5 m 5.27 133.8 P572303 DT-N-HC-1-5UM, High collapse








Table 5 (Primary)



D Electrical/visual 35 + 5 psid

E Electrical/visual 100 + 12 psid

G Electrical/visual 35 + 5 psid

w/TL

J No indicator L Visual indicator 35 + 5 psid

M Visual indicator 35 + 5 psid

w/ TL and surge

N Electrical/visual 35 + 5 psid


O Visual indicator 100 + 12 psid

P Visual indicator 100 + 12 psid

w/ TL and surge

R Electrical switch 35 + 5 psid

S Electrical/visual 100 + 12 psid


T Electrical switch 100 + 12 psid

W Electrical/visual 100 + 12 psid

w/TL

Y Electrical/visual 35 + 5 psid

w/TL and surge

Z Electrical/visual 100 + 12 psid


Table 1

Filter Assembly

CODE DESCRIPTION

W341 Assembly

Table 2


CODE DESCRIPTION


w/bypass valve


without bypass valve

Table 3

Port Size Options

CODE PORT SIZE

A SAE-12 O-ring

Table 4


CODE BYPASS SETTING

1 Non-bypass

4 50 psid

Table 7

Assembly & Filter Length

CODE (LGTH) FILTER LENGTH

1 (7.28") 5.3"2 (10.03") 8.0"

W341 1 A 1 M N B 1

TABLE 1 TABLE 2 TABLE 3 TABLE 4 TABLE 5 TABLE 6 TABLE 7


Change W341 to G341

Porting code A becomes G-3/4"

ISO 228 BSPP

Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Table 6

Seal Options

CODE MATERIAL

B Buna-N

V Viton

Filter

Assembly

Service


LEAD TIME NOTE:



Hirschmann is a registered trademark of Richa rd Hirschmann of America Inc.

Buna-Nand Vitonare registered trademarks of E. I. DuPont de Nemours an

Media Ratings








For a complete filter interchange, visit

crossreference.donaldson.com.

METRIC PORTING AVAILABLE








The W440 filter assembly can be manifold mounted to the hydraulic system. The size and material configuration

are well-suited for todays demanding proportional and servo valve applications. Our standard housing drain plug

helps relieve system pressure during filter change-outs. DT 4-layer media is offered in a variety of designs. Five

different media grades are offered. Donaldson filters core collapse options range from 150 to 3,000 psi. The

differential pressure indicator line is designed to work with a wide assortment of bypass valves. Thermal lockout

and surge control are two key features incorporated in many of the differential pressure indicators.




Manifold Mounting

Bypass Valve

(Subplate Only)

Inlet and Outlet PortO-rings (-117) supplied

101.60

(4.00)

50.80(2.00)

81.28

(3.20)

46.23

(1.82)

17.02

(.67)

31.75

(1.25)

Drill 8.89 (.350) Hole Thru

25.40 (1.00) C'Bore

17.53 (.69) Hole

4 Plcs.

110.74

(4.36)

44.45

(1.75)

31.75

(1.25)

88.90

(3.50)

104.65

(4.12)

52.32

(2.06)

15.75

(.62)

Visual-86.61 Max.(3.41)

Elec.-98.04 Max.

(3.86)

P Indicator

2 Plcs

INLET

OUTLET






Dimensions: millimeters/(inches)



Head - Top View


6.73 (.265) Drill Hole Thru.

Mounting Holes, 2 Plcs.

Required ForElement and

63.50(2.50) Min.

Drain Plug

9/16-18UNF

Thread

SAE-6 Straight

69.34 (2.73)

Inlet Port

79.37

(3.125)

P Indicator

25.40

(1.00)

Visual-92.71 Max.

(3.65)

Electrical-104.14 Max.

(4.10)

Refer To

Model Code

(Assembly Length)

Torque Bowl To

20 N.M(15 Lbs-Ft)Max

O utlet

Port

Bowl Removal.

IN

OUT




Indicator Switch






Performance Data





Standard collapse DT designs are double wire-backed using epoxy-coated steel mesh for maximum pleat support and dirt capacity.



Vitonseals are standard on all Donaldson DT filters. Vitonis a registered trademarks of E. I. DuPont de Nemours and Company.

W440 Components

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

W440 4" DT Filter OnlyDT-9020-4, 4.41"/111.9mm







Table 5 (Primary)



A Visual indicator 70 psid w/TL & surge

B Electrical/visual 70 psid

w/TL and surge

D Electrical/visual 35 psid

E Electrical/visual 100 psid G Electrical/visual 35 psid w/TL

I Visual indicator 70 psid

J DP indicator plug

L Visual indicator 35 psid

M Visual indicator 35 psid

w/ TL and surge


w/12" 3-wire flying lead



w/TL and surge





U Electrical switch 70 psid

W Electrical/visual 100 psid w/TL


w/TL and surge


w/TL and surge


Table 1

Filter Assembly

CODE DESCRIPTION

W440 Assembly

Table 2


CODE DESCRIPTION


w/bypass valve


w/o bypass valve

Table 3

Port Size Options

CODE PORT SIZE

A SAE-12 O-ring

S Manifold mounting

Table 4


CODE BYPASS SETTING

1 Non-bypass

4 50 psid

6 90 psid


Table 7


CODE (LGTH) FILTER LENGTH 1 (7.18") 4.4"

2 (10.8") 8.2"*

*HF2

W440 1 S 1 J N B 1



Change W440 to G440

Porting code A becomes G-3/4"ISO 228 BSPP

Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Filter

Assembly

Service

Filter


Filters ordered separately. See previous page for filter options.

LEAD TIME NOTE:



Hirschmann is a registered trademark of Richard Hirschmann of America Inc.

Buna-Nand Vitonare registered trademarks of E. I. DuPont de Nemours and Company.

Media Ratings

Western Filter elements have been replaced byDonaldson DT high-performance cartridges.


01



FPK02 In-Line Cartridge Filters

Standard Bypass Ratings 87 psi/ 600 kPa / 6 bar 87 psiBypass with reverse-flow

check valve No Bypass

Operating Temperatures -20F to 250F / -29C to 120C

Filter Collapse Ratings 290 psi/ 2000 kPa / 20 bar (standard) 3000 psi/ 20,700 kPa / 207 bar

(high collapse)




Indicator PlugRemove plug to

install visual or

electrical indicator.

46.0

94

3.7

42

83.4

M8 X 17 2X

.91

3.28

23.0

1.81

1.7

OUTLETINLET

4.47

113.5

Head - Top View

Head - Side View

M8 x1.25

x .55 Full THD

[14} 2-PLCS

All dimensions above are shown in inches [millimeters]

FPK02Max Flow: 25 gpm (95 lpm)


90.0

332.5

13.09

HOUSING

HOUSING

231.5

9.11

1.61

41.0

3.54

Short Housing

Long Housing

FPK02 Specification Illustrations

All dimensions are shown in inches [millimeters]. Applications


Meets HF2 Specification Mobile Equipment Power Steering Circuits Servo Valve Circuits



FPK02 Components

NOTE:Indicator port is machined and plugged. Replace plug with indicatorof choice: P171945 (visual) or P761056 (electrical).

SAE-12 O-Ring 87 psi / 6 bar P762766

SAE-12 O-Ring 87 psi / 6 bar P762767

with reverse-flow

check valveSAE-12 O-Ring No Bypass P762768

Head ChoicesHead ChoicesPort Size Bypass Rating Part No.

Housing ChoicesLength Part(in.) No.

4.4" filter P762769

8.2" filter P762770

RFC

Reverse FlowCheck Schematic








Vitonseals are standard on all Donaldson DT filters. Vitonis aregistered trademark of E. I. DuPont de Nemours and Company.



DT Synteq Synthetic




Filter Notes* Utilizes DT Synteq synthetic media Refer to the table in the Technical Reference Guide for fluid compatibility with our filter media.

If youre filtering petroleum-based oil, filters with seals made of Buna-N are appropriate for most applications.

If youre filtering diester, phosphate ester fluids, water glycol, water/oil emulsions, and HWCF over 150F/83C, usefilters with seals made of fluorocarbon, such as Vitonfrom DuPont Dow Elastomers, or Fluorelfrom 3M Company.

Donaldson "high collapse" filters, with their steel end caps and wire-backed media, are rated to withstand up to 3000psi/ 20,700 kPa before collapsing.

The fluorocarbon seal/high collapse filters also use epoxy potting and media seam seals for added chemicalcompatibility.






Synteq Synthetic 5 m 4.37 111 P167180* Fluorocarbon Seal, High Collapse


7 m 4.37 111 P169429 Buna-NSeal

7 m 4.37 111 P165041 Buna-N Seal

7 m 8.12 203 P167838 Buna-N Seal

7 m 8.12 203 P165043 Buna-N Seal

9 m 4.37 111 P165006 Buna-N Seal

9 m 8.12 203 P165015 Buna-N Seal



23 m 4.37 111 P165136 Buna-N Seal

23 m 8.12 203 P165138 Buna-N Seal



Performance Data


FPK02 Standard 8" Filter Only8.12"/203mm

FPK02 Housing Only

FPK02 Standard 4" Filter Only4.37"/111mm

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

0

3

6

9

12

15

0 5 10 15 20 25

0

20

40

60

80

100

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

SAE-12

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80

0

5

10

15

20

25

0 5 10 15 20 250

30

60

90

120

150

0 20 40 60 80



When installing the FPK02 housing onto an installed head, torque it to 15 ft-lbs./2.1 kg-m.

FPK02 Service Parts


- oil before assembling

Filter

Housing

Head

Plugremove only wheninstalling indicator.

AC/DC ElectricalIndicatorP761056

5 bar, 72.5 psid

Visual IndicatorP1719455 bar, 72.5 psid

O-Ring 2-140P173382Non-stock item

G 1/2"threads

SERVICE PARTS NOTE:Some service parts may not be stocked. Please contact yourDonaldson sales representative for lead time details.

Back-up RingP173380Non-stock item










Head - Top View


Outlet Port

33.27 Hex

(1.31)

Drain Plug9/16-18 UNF

SAE 6 Straight Thread

Refer to

Model Code

(Assembly Length)

Vi sual- 38.1 (1.50) Max.

Electrical- 49.53 (1.95) Max.

63.5 Min.

(2.50)Required For Bowl

and Element Removal

50.8

(2.00)

69.3

(2.73)

Inlet Port

P Indicator

l

i l . . .

l i l . . .

..

.

.

.

.

.

.

.

.

.

.

. i .

i l

l

l l

i

l

.

.

i l

i

l

l

i l . . .

l i l . . .

. i .

.

i l

l l

.

.

.

.

l

i

l

i l . . .

l i l . . .

57.2

(2.25)

28.4

(1.12)

94.5

(3.72)

47.2

(1.86)

139.7

(5.50)

97.0

(3.82)

7/16-14 UNC-2B Thd

.70 Min. Thd Depth

Mounting Hole

4 Plcs

Bleed Plug

7/16-20UNF

SAE-4 Straight Thread




Indicator Switch




Applications






Performance Data







W613 4" DT Filter OnlyDT-9800-4, 4"/102mm



W613 Housing Only

Flow Rate (gpm)

Pressure

Drop

(psid)

0

0

4

8

12

16

20

2010 30 40

SAE-12

SAE-16

1" Flg. Mt.

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

0

20

40

40 50 60

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

Flow Rate (gpm)

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m





Table 1

Filter Assembly

CODE DESCRIPTION

W613 Assembly

Table 2


CODE DESCRIPTION 1 150 psid for housing

w/bypass valve



Table 3

Port Size Options

CODE PORT SIZE

A SAE-12 O-ring

B SAE-16 O-ring

F 1" SAE 4-Bolt FlangeCode 61

M 1" SAE 4-Bolt Flange

Code 62

Table 4


CODE BYPASS SETTING

1 Non-bypass

4 50 psid

6 90 psid

Table 7



1 (8.10") 4.4"

2 (11.75") 8.2"

W613 1 B 4 M N B 2



Change W613 to G613

Porting code A becomes 3/4"ISO 228 BSPP

Porting code B becomes 1"ISO 228 BSPP

Porting code F becomes 1" SAE 4 boltflange with M10 mounting threads

Porting code M becomes 1" SAE 4 boltflange with M12 mounting threads

Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Table 6Seal Options

CODE MATERIAL

B Buna-N

V Viton

Table 5 (Primary)



A Visual indicator 70 + 10 psid

w/TL and surge

B Electrical/visual 70 + 10 psid

w/TL and surge

D Electrical/visual 35 + 5 psid

E Electrical/visual 100 + 12 psid

G Electrical/visual 35 + 5 psid w/TL

I Visual indicator 70 + 10 psid

J No indicator

L Visual indicator 35 + 5 psid

M Visual indicator 35 + 5 psid

w/ TL and surge

N Electrical/visual 35 + 5 psid


O Visual indicator 100 + 12 psid

P Visual indicator 100 + 12 psid

w/TL and surge

R Electrical switch 35 + 5 psid

S Electrical/visual 100 + 12 psid


T Electrical switch 100 + 12 psid

U Electrical switch 70 + 10 psid

V Electrical/visual 70 + 10 psid w/TL

W Electrical/visual 100 + 12 psid

w/TL

Y Electrical/visual 35 + 5 psid

w/TL and surge

Z Electrical/visual 100 + 12 psid

w/TL and surge


Filter

Assembly

Service


LEAD TIME NOTE:


Media Ratings




01










Head - Top View

Assembly - Side Views

73.15

(2.88)

SAE-12 Plug

SAE-24 Access Plug

(Ball Valve)

Outlet Check Valve

Typ 2 Plcs

69.85 Min.

(2.75)

Clearance to

Remove Element

and Bowl

97.54

(3.84)

164.34

(6.47)

Max

Torque Bowl to Head

20 N.M(15 Lbs-Ft)Max

Drain Plug

9/16-18UNF

(SAE-6 Plug)

152.40

(6.00)

P Indicator

292.61

(11.52)

Bleed Plug

7/16-20UNF

(SAE-4 Plug)

Inlet Port

(Outlet Port at

Opposite Side.)

Refer To

Model Code

(Assembly Length)

.

.

.

.

.

i l l

.

.

.

.

..

..

.

.

l l

l

.

.

i i i i

: l i i

.

.

l

l

ll l

l l

l

. i .

.

l

l

l

.

.

.

.

l

.

i l

l

.

.

i

.

.

l l

l

l

l

i i .

l

l

243.84

(9.60)

152.40

(6.00)

7/16-14UNC-2B Thd.

Mounting Holes, 4 Plcs

50.80

(2.00)

12.70

(.50)

218.40

(8.60)

12.70

(.50)

254.76

(10.03)

Alternate Outlet Port

(Plugged)

105.40

(4.15)

indicates flow direction

Note: Handle position




Indicator Switch




Applications











Vitonseals are standard on all Donaldson DT filters. Vitonis a registered trademark of E. I. DuPont de Nemours and Company.

Performance DataW322 4" DT Filter Only

DT-9800-4, 4"/102mm



Flow Rate (gpm)

Pressure

Drop

(psid)

W322 Housing Only

0

0

10

20

30

40

2010 30 40 50 0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m





Table 5 (Primary)



A Visual indicator 70 psid

w/TL and surge


w/TL and surge

D Electrical/visual 35 psid E Electrical/visual 100 psid



J P indicator plug



w/TL and surge





w/TL and surge






V Electrical/visual 70 psid w/TL

W Electrical/visual 100 psid w/TL


w/TL and surge


w/TL and surge


Table 1

Filter Assembly

CODE DESCRIPTION

W322 Assembly

Table 2


CODE DESCRIPTION


w/bypass valve



Table 3

Port Size Options

CODE PORT SIZE

B SAE-16 O-ring

Table 4


CODE BYPASS SETTING

1 Non-bypass

4 50 psid

6 90 psid

Table 7



1 (6.88") 4.4"

2 (9.86") 8.2"

W322 1 B 4 D N B

TABLE 1 TABLE 2 TABLE 3 TABLE 4 TABLE 5 TABLE 6


Change W322 to G322

Porting code B becomes 1"

ISO 228 BSPP

Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Table 6

Seal Options

CODE MATERIAL

B Buna-N

V Viton

*Note: Use option 1 code only with

3000 psid collapse filter.

2

TABLE 7

Filter

Assembly

Service


LEAD TIME NOTE:


Media Ratings




01




Features





The W350 T-type ported series offers flows up to 50 gpm (190 lpm) with 3 bypass options and conforms to

the HF3 automotive standard. Our standard housing drain plug helps relieve system pressure during filter

changeouts. DT 4-layer media is offered in a variety of designs. Five different media grades are offered.

Donaldson filters core collapse options range from 150 to 3,000 psi (10 to 210 bar). The differential pressure

indicator line is designed to work with the wide assortment of bypass valves. Thermal lockout and surge

control are two key features incorporated in many of the differential pressure indicators.




Differential Indicators:Indicators are designed to actuate at approximately 80% of bypass valve cracking pressure.

It is recommended that an indicator with a bypass setting of 100 psid is used with a non-

bypass housing.

Surge Control:This optional feature is used to dampen pressure surges or spikes to avoid premature

actuation of the indicator. Surge control delays the indicator response.

Thermal Lockout:The Thermal Lockout prevents premature signaling of a bypass condition created by viscous

fluid during cold start-ups. Normal indicator actuation capability is resumed once the

operating temperature of the fluid reaches approximately 80F / 27C.





Head - Top View


123.19

4.85

26.92

1.06

130.30

5.13

HEX32.67

1.29

MAX.

34.80

1.37

VISUAL 54.10(2.3)MAX.

ELECT. 65.53(2.58)MAX.

P INDICATOR

BLEED PLUG

7/16-20UNFSAE-4 STRAIGHT THD

INLET PORT

TORQUE BOWL TO20 N.M. (15 LBS-FT) MAX

DRAIN PLUG9/16-18UNF

SAE 6 STRAIGHT THD

OUTLET PORT

REFER TOMODEL CODE

(ASSEMBLY LENGTH)

MIN

REQ'D FOR ELEMENTAND BOWL REMOVAL

50.80 2.00

5/16-18UNC-3B THD.

2X MOUNTING HOLES

57.15

2.25

28.58

1.12

63.50

2.50

31.89

1.26

33.53

1.32

34.92

1.38




Indicator Switch







Filter Notes All Donaldson DT and DX2 filters utilize glass

fiber media with an epoxy-based resin systemfor the ultimate in chemical compatibility.

All Donaldson DT and DX2 filters are potted withepoxy-based adhesives.

Standard collapse DT designs are double wire-backed using epoxy-coated steel mesh formaximum pleat support and dirt capacity.


High collapse designs are also potted intomachined aluminum endcaps for greater filterintegrity in critical applications.

Vitonseals are standard on all Donaldson DTand DX2 filters. Vitonis a registered trademarkof E. I. DuPont de Nemours and Company.

DX2 filters utilize nylon mesh for pleat support.

W350 Components

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

W350 Housing Only

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

0

5

10

15

20

25

0 10 20 30 40 50 600

20

40

60

80

100

120

140

160

0 50 100 150 200

0

5

10

15

20

25

0 10 20 30 40 50 600

20

40

60

80

100

120

140

160

0 50 100 150 200

0

5

10

15

20

25

0 20 40 60 80 1000

20

40

60

80

100

120

140

160

0 50 100 150 200 250 300 350

0

5

10

15

20

25

0 20 40 60 80 1000

20

40

60

80

100

120

140

160

0 50 100 150 200 250 300 350

0

5

10

15

20

25

0 10 20 30 40 500

20

40

60

80

100

120

140

160

0 50 100 150

5m



Table 1

Filter Assembly

CODE DESCRIPTION

W350 Assembly

Table 2


CODE DESCRIPTION


w/bypass valve


w/o bypass valve

Table 4


CODE BYPASS SETTING

1 Non-bypass

3 25 psid

4 50 psid

6 90 psid


Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Table 7


CODE (LENGTH) FILTER LENGTH

1 (8.5") 4.0"

2 (12.0") 8.0"

Filter

Assembly

Service

Filter

W350 1 B 1 J N B 1


Table 5 (Primary)



A Visual indicator 70 psid

w/TL & surge


w/TL and surge

C Electrical/visual 15 psid D Electrical/visual 35 psid

E Electrical/visual 100 psid

F Electrical/visual 15 psid w/TL


H Electrical/visual 15 psidw/12" 3-wire flying lead


J P indicator plug K Visual indicator 15 psid



w/ TL and surge N Electrical/visual 35 psid



P Visual indicator 100 psidw/TL and surge

Q Electrical switch 15 psid


S Electrical/visual 100 psidw/12" 3-wire flying lead



W Electrical/visual 100 psid w/TL X Electrical/visual 15 psid

w/TL and surge

Y Electrical/visual 35 psidw/TL and surge

Z Electrical/visual 100 psidw/TL and surge



Change W350 to G350

Porting code B becomes G-1"ISO 228 BSPP

Table 3

Port Size Options

CODE PORT SIZE

A SAE-12 O-ring

B SAE-16 O-ring



Filters ordered separately. See previous page for filter options.

LEAD TIME NOTE:


Media Ratings




01



Standard Bypass Ratings 50 psi/ 345 kPa / 3.5 bar No Bypass

Operating Temperatures -20F to 250F / -29C to 121C

Filter Collapse Ratings 200 psi/ 1380 kPa / 13.8 bar (standard) 3000 psi/ 20,700 kPa / 206.9 bar

(high collapse)




Head - Top View



HPK03 Specification Illustrations

All dimensions are shown in inches [millimeters].

HPK03with Visual Service Indicator

HPK03with AC/DC Electrical Service Indicator

Applications


Meets HF3 Specification Mobile Equipment Servo Valve Circuits



HPK03 Components

Filter Notes All Donaldson DT and DX2 filters utilize glass fiber media with an epoxy-based resin system for the ultimate in chemical compatibility.

All Donaldson DT and DX2 filters are potted with epoxy-based adhesives. DX2 filters utilize nylon mesh for pleat support.




Vitonseals are standard on all Donaldson DT and DX2 filters. Vitonis a registered trademark of E. I. DuPont de Nemours and Company.


Filter Notes* Utilizes DT Synteq synthetic media

SEALS: Filters with seals made of Buna-Nare appropriate for most applications involvingpetroleum oil. Filters with seals made of Viton(a fluoroelastomer) are required when usingdiester, phosphate ester fluids, water glycol, water/oil emulsions, and HWCF (high water contentfluids) over 150F/83C.

Refer to table in the Technical Reference Guide for fluid compatibility with our filter media.

Donaldson high collapse filters are physically designed to withstand up to 3000 psi / 20,700 kPabefore collapsing.

The Vitonhigh collapse filter versions also use epoxy potting and media seam seals for addedchemical compatibility.





Media x(c) = 2 x(c) = 1000 Length Donaldson CommentsType Rating based on ISO 16889 in mm Part No.

Synteq Synthetic 5 m 8.22 208.8 P167185* Viton, High collapse for no bypass applications

7 m 8.22 208.8 P167842 Buna-N

7 m 8.22 208.8 P164594 Buna-N

9 m 8.22 208.8 P164166 Buna-N

12 m 8.22 208.8 P167186* Viton, High collapse for no bypass applications

23 m 8.22 208.8 P164174 Buna-N

50 m 8.22 208.8 P165319 Buna-N

Water

Absorbing 10 m 8.22 208.8 P569528

Wire Mesh 75 m 8.22 208.8 P162233



DT Synteq Synthetic



The P179579housing is 10.73 inches (273mm) long and accepts the filterthat is 8.22 inches (208.8mm) long. It includes a head-to-housing seal.

Port Size Bypass Rating Indicators1 Part No.

SAE-16 O-Ring 50 psi / 3.5 bar Visual indicator, left side P166353

SAE-12 O-Ring 50 psi / 3.5 bar Visual indicator, left side P170489

SAE-12 O-Ring No bypass Visual indicator, left side P170491

Head Choices

Notes1Donaldson uses the inlet port as the reference point. "Left side," for instance, means that the indicator

mounts on the side of the filter head that is on your left when you face the inlet port.

Housing ChoicesLength Part(in.) No.

8.22" filter P179579


Replacement Indicator Only

Part No.


P569634 50 psi / 3.5 bar


P569635 90 psi / 6.2 bar


P567986 50 psi / 3.5 bar


P567987 90 psi / 6.2 bar


Part No.




P567988 50 psi / 3.5 bar

35 psi/2.4 bar indicator kitauto reset pop-out button withthermal lockout and surge control

P567989 90 psi / 6.2 bar

70 psi/4.8 bar indicator kit*auto reset pop-out button withthermal lockout and surge control

AC/DC Visual/Electrical Service Indicators

All kits include indicator with mounting block

Visual Service Indicators

Service Indicator Kits Indicator Choices


P567458Visual/Electrical indicator with thermal lockoutand surge, 35 psid/2.4 bar

P567459

Visual/Electrical indicator, with thermal lockout

and surge 70 psid/4.8 bar









P166134 Blanking plate

Indicator Mounting Block


P573495 Mounting Block Assembly



Performance Data


HPK03 8" Standard Filter OnlyHPK03 Housing Only

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

0

3

6

9

12

15

0 12 24 36 48 600

20

40

60

80

100

0 50 100 150 200

SAE-12

SAE-16

0

4

8

12

16

20

0 12 24 36 48 600

30

60

90

120

0 50 100 150 200

0

5

10

15

20

25

0 20 40 60 80 1000

20

40

60

80

100

120

140

160

0 50 100 150 200 250 300 350

0

5

10

15

20

25

0 20 40 60 80 1000

20

40

60

80

100

120

140

160

0 50 100 150 200 250 300 350

0

5

10

15

20

25

0 10 20 30 40 500

20

40

60

80

100

120

140

160

0 50 100 150

WireMesh

5m8m

12m

23m


43/86





Working Pressures to: 6,000 psi41,368 kPa414 bar


Fatigue Pressure Rating: 3,500 psi24,131 kPa241 bar












Head - Top View





Indicator Switch



Manifold Mounting

Inlet and Outlet PortO-rings (-120) supplied

69.34

(2.73)

61.20(2.41)

Drain Plug9/16-18UNFSAE 6 Straight Thread

33.27(1.31)

Hex

Bleed Plug7/16-20UNFSAE 4 Straight Thread

P Indicator

13.97(.55)

28.58(1.12)

57.15(2.25)

61.21(2.41)

94.49(3.72) 47.24

(1.86)

7/16 -14UNC-2B Thd2 Plcs X 22.35(.88) Deep

52.32(2.06)

26.16(1.03)

38.10(1.50)

Outlet Port30.23 (1.19) C'Bore Dia

23.37 (.92) Flow Port Dia

7/16-14UNC-2B ThdThru 4 Plcs

77.72 Max(3.06)

Inlet Port

63.50 Min (2.50) Req'd For Element And Bowl Removal

Visual - 38.10 Max (1.50)Electrical - 49.53 Max (1.95

Refer ToModel Code

(Assembly Length)

Inlet Port

30.23 (1.19) C'Bore Dia21.34 (.84) Flow Port Dia

Torque Bowl to20 N.M (15 Lbs-Ft) Max

IN

65.02(2.56)

57.15(2.25)

28.45(1.12)

94.49(3.72)

47.24(1.86)

7/16-14UNC-2BThd Thru 4 Plcs

Outlet Port

88.39(3.48)






Performance Data










W610 Housing Only

Bypass Valve

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

0

20

40

40 50 60

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

Flow Rate (gpm)

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

0

20

40

60

80

100

120

140

160

0 40 80 120 160 200

0

5

10

15

20

25

0 10 20 30 40 50 60

PressureD

rop

(kPa)

Flow Rate (lpm)

PressureD

rop

(psid)

Flow Rate (gpm)

5m





Table 1

Filter Assembly

CODE DESCRIPTION

W610 Assembly

Table 2


CODE DESCRIPTION 1 150 psid for housing

w/bypass valve



Table 3

Port Size Options

CODE PORT SIZE

A SAE-12 O-ring

B SAE-16 O-ring

F 1" SAE 4-Bolt FlangeCode 61

M 1" SAE 4-Bolt Flange

Code 62

S Manifold Mounting

Table 4


CODE BYPASS SETTING

1 Non-bypass

4 50 psid

6 90 psid

Table 7



1 (6.75") 4.0"

2 (10.40") 8.0"

W610 1 A 4 J N B 1



Change W610 to G610

Porting code A becomes G3/4"ISO 228 BSPP

Porting code B becomes G1"ISO 228 BSPP

Porting code F becomes 1" SAE 4 boltflange with M10 mounting threads

Porting code M becomes 1" SAE 4 boltflange with M12 mounting threads

Table 5 (Secondary)

Receptacle Options



H Hirschmann(4-pin)


Table 6Seal Options

CODE MATERIAL

B Buna-N

V Viton

Filter

Assembly

Service


LEAD TIME NOTE:


Media Ratings




01



FPK04 In-Line Cartridge Filters

The FPK04 T-type ported series offers flows up to 100 gpm (379 lpm) with a bypass option and

conforms to the HF3 automotive standard.

Donaldson Synteqmedia is offered in a variety of designs. Upgraded Donaldson high-performance DT

filters are also offered for superior performance. The differential pressure indicator line is designed to work

with the wide assortment of bypass valve options.




Conforms to HF3 specifications

High collapse filters available for use

with non-bypass applicationsWide range of indicator options

Three housing length options for design flexibility

Buna-Nseals standard, Vitonavailable

Head material: cast ironHousing material: steel

DT Replacement Filter Lengths

4.56" / 116mm 4.59" / 116.7mm 8.19" / 208mm 8.22" / 208.8mm




13.60 [345.5]

9.94 [252.5]

5.59 [142.0]

5.59 [142.0]

5.59 [142.0]

18.37 [466.50]

Head - Top View



FPK04 Specification Illustrations

2.24 [57.0]

3.70 [94.0]

All dimensions are shown in inches [millimeters]. Applications


Meets HF3 Specification Mobile Equipment Servo Valve Circuits



Port Size Bypass Rating Indicators Part No.

SAE-20 87 psi / 6 bar plugged only P568720

SAE-20 No bypass plugged only P568721

Head Choices

NotesHousings include the head to housing seal.

Housing Choices Indicator ChoicesFilter Length Part (in.) No.

4.6" P568722

8.2" P568723

12.9" P568724

Set Point / Type Part No.39 psi/2.7 bar ele N.O. P165194

39 psi/2.7 bar ele N.C. P167455

FPK04 ComponentsHigh-Performance DT Filter Choices

Filter Notes

All Donaldson DT and DX2 filters utilize glass fibermedia with an epoxy-based resin system for theultimate in chemical compatibility.

All Donaldson DT and DX2 filters are potted with

epoxy-based adhesives. Standard collapse DT designs are double wire-

backed using epoxy-coated steel mesh formaximum pleat support and dirt capacity.


High collapse designs are also potted intomachined aluminum endcaps for greater filterintegrity in critical applications.

Vitonseals are standard on all Donaldson DTand DX2 filters. Vitonis a registered trademark ofE. I. DuPont de Nemours and Company.

DX2 filters utilize nylon mesh for pleat support.




DT Synteq Synthetic



Filter Element

Housing

Drain Plug

FPK04 Service Parts


Head

Indicator

PlugRemove only wheninstalling indicator


Media x(c) = 2 x(c) = 1000 Length Donaldson Comments


Synteq Synthetic



Performance Data


FPK04 4" Standard Filter Only4.62"/117.3mm

FPK04 Housing Only

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Flow Rate (lpm)

0

5

10

15

20

25

0 10 20 30 40 50 600

20

40

60

80

100

120

140

160

0 50 100 150 200

FPK04 8" Standard Filter Only8.20"/208.3mm

Flow Rate (gpm)

Pressure

Drop

(psid)

Pressure

Drop

(kPa)

Documents

donaldson visokotlačni filteri