Dosya Sunum Katalogurdtrengservices.com/owner/slider/201908095335Aug.pdfİZMİR / TURKEY, given service in the factory with the current 1500 m2 closed area with the local and international

cesimakMAKİNE İMALAT SAN. TİC. LTD. ŞTİ.

Cesimak machinery manuf.co.ltd.

QUOTATION FOR 9 STAND 3 GROUPROLLING MILL EQUIPMENT

CAPACITY : 15 TON / DAILYSIZE : Ø12-Ø32 mm. BILLET :130x130 MM.

1



ABOUT CESİMAK A.Ş.

CESİMAK A.Ş., is manufacturing industrial Rolling machines and equipments which the needs of the states and the World. At the year 1990 by mechanical engineer HADİ DENLİ, it was established in İZMİR / TURKEY, given service in the factory with the current 1500 m2 closed area with the local and international market experience has useful and succesful in the iron and steel industry. The Project for the iron and steel industry, engineering, cansulting, all kinds of Rolling machine and equipment manufacturing, turnkey machine installation, machine meticulously executed Project phases by our engineers, the worlwide control of our expert staff is made with the assurance to CESİMAK in

appropriate circumstances.

Our company is ISO 9001:2008 Quality Management System is implemented and is based on customer satisfaction. We have produced machines according to the machine Safets Directive 98/37 EEC ( CE

Certificate) has passed all test and inspections.Increase productivity with convenient layout and equipment with advancing technology and offering more lucrative opportunities, producing practical solution to help reduce production cost, the need for less labor than with more enabling automation and process controls, the best quality and work standarts in all areas of production practices aimed, acceptance can be useful and commercial offers solutions.

CESİMAK, is aims to be the best in the Rolling mill industry in the region, using the latest technology at manufacturing and installation.

2



HEATING FURNACE

60.000 t/year (2,5 x 17m all propelled diesel- fueled oil, recuperator, charge, discharge equipments)

• Furnace steel construction materials• Furnace refractory materials• Furnace chimney channel• All chimney and equipment manufacturing• All recuperator and equipment manufacturing• Burning furnace air pipe and equipment manufacturing• Burning furnace air pipe isolation• Burning furnace air fan and motor• Fueloil equipment and supplies• Furnace automation and equipments• Billet pusher hydraulic power unit• Billet pusher piston• Billet pusher frame• Billet loading table• Billet loading table hydraulic power unit• Billet loading table hydraulic piston• Bilet remover boom• Oven out pinch roll manufacturing• Furnace supplies materials • Furnace electrical materials• Engineering – cast of project

3



TRIO ROUGHING WORKBENCH

4

ENGINE 1250 KW-AC ENGINE 1 PCS

FLY WHEEL 3,5 TON 1 PCS

GEAR BOX 1/9 REDUCTION DOUBLE STAGE 1 PCS

TRIO TYPE E=450mm 1 PCS

COUPLINGS 3 SET

SHAFTS 3 PCS

PREPARING TRIO TYPE E=450(BEDS FELTS AND 1 PCSWORKBENCH BEARINGS INCLUDED)

ROLLER 3 PCS

BEARINGS URB 24140 6 PCS

FIXED TABLE 12 MT 1 PCS

MOVABLE TABLE 7 MT 1 PCS



ROLLING MILL FLYWHEEL

5

WEIGHT :3500 KG

DIAMETER :Ø1800 mm

THICKNESS :240 MM

FLYWHEEL SHAFTS :SAE 4140

BEARING BEDS :GS 52 STEEL CASTING

BEARINGS :24040 - URB



ROUGHING GEARBOX

6

GEARBOX TYPE :1/9 DOUBLE STAGE

GEAR TYPE :DOUBLE HELICAL

BODY PLATE THICKNESS :30 MM

BEARING BED THICKNESS :90 MM

GEAR SHAFTS :SAE 4140

BEARINGS :24036 – 24040 - 24044



ROUGHING THREE- HIGH GEARBOX

SHAFTS

7

TYPE :E=450 mm

WORKING CENTER :400 mm

BODY PLATE THICKNESS :30 mm

BEARING CHOCK THICKNESS :90 mm

LENGHT OF GEAR :500 mm


BEARINGS :24040 URB

SHAFTS TYPE : BROAD AXE SHAFT

TYPE OF SHAFT TRANSFER : INVALUTE GEAR

SHAFTS MATERIALS : STEEL CASTING



ROUGHING STAND

STAND TYPE : TRİO E=450mm

BODY OF STAND : St 42 / 240X220 BLUM

LOWER BEARING MOVEMENT : KINEAR SYSTEM

UPPER BEARING MOVEMENT : SPRING PRESSURE SYSTEM

IRON BALKONY MATERIALS : St 37 / 40 mm

BEARING BED : GS 52 STEEK CASTING / ONE PIECE

BEARINGS : 24040 - URB

9

COUPLINGS

ENGINE-FLYWHEEL-GEAR BOX-TRIO BOX JOINT COUPLINGS PIECE : 3 SET



MOVING TABLE AND FIXED TABLE

LENGTH OF MOVING TABLE :7000 MMWIDTH :1000 MMMOVING TABLE DRIVE SHAFTS :PNEUMATIC CYLINDER(Ø320X370)MATERIALS :300 / NPI STEEL CONSTRUCTIONROLE DIAMETER :Ø300 MMROLE LENGTH :1000 MMDRIVE TYPE :MOTOR, GEARBOX AND BELT CONVEYORMOTOR :5,5 KW 1400 d/minGEARBOX :1/15-93 d/min

LENGTH OD FIXED TABLE :12000 MMWIDTH :1000 MMMATERIALS :300 / NPI STEEL CONSTRUCTIONROLE DIAMETER : Ø300 MMROLE LENGTH :1000 MMDRIVE TYPE :MOTOR,GEARBOX AND BELT CONVEYORMOTOR :5,5 KW 1400 d/minGEARBOX :1/15-93 d/min

10



GROUP ROUGHING MILL SYSTEM

11

MOTOR 1000 KW AC MOTOR 1 PCS

GEARBOX 1/7 BOND, DOUBLE STAGE 1 PCS TRIO BOX E=380 CENTER 1 PCS COUPLINGS MOTOR, FLYWHEEL, GEARBOX, TRIOBOX 3 SET

FINISH STAND E=380mm DUO TYPE (BEDS FELT ANDBEARING INCLUDE) 7 PCS

ROLLER 6 PCS

BEARINGS 24040 - URB 12 PCS SHAFTS AXE SHAFTS 6 PCS

CURVE 4 PCS



ROLLING MILL FLYWHEEL

WEIGHT :3500 KG

DIAMETER :Ø1700 mm

THICKNESS :230 MM

FLYWHEEL SHAFTS :SAE 4140

BEARING BEDS :GS 52 STEEL CASTING

BEARINGS :24040 - URB

12



GROUP GEAR BOX

GEARBOX TYPE :1/5 SINGLE STAGE


BODY PLATE THICKNESS :30 MM

BEARING CHOCK THICKNESS :90 MM

GEAR SHAFTS :SAE 4140

BEARINGS :24036 – 24040

13



GROUP GEAR BOX

SHAFTS

TYPE :E=380 mmWORKING CENTER :380 mmBODY PLATE THICKNESS :30 mmBEARING CHOCK THICKNESS :90 mmGEAR LENGTH :450 mmGEAR TYPE :DOUBLE HELIXBEARINGS :24036 URB

SHAFTS TYPE : BROAD AXE SHAFTSTYPE OF SHAFT TRANSFER : INVALUTE GEAR HANGERSHAFTS MATERIALS : STEEL CASTING

14



COUPLINGS

ENGINE-FLYWHEEL-GEAR BOX-TRIO BOX JOINT COUPLINGS PIECE : 3 SET

STAND TYPE :E=380mm

BODY OF STAND :St 37/ 180x180 BLUM

IRON BALCONY MATERIALS :St 37 /30 mm STEEL PLATE

RUNNER FIXING LUGS :GS 52 STEEL CASTING

CONNECTION BOLTS AND STUDS :SAE 1050

TOP ROLLER LIFTING :2/ PCS – SPRING SYSTEM

STAND BED :GS 52 STEEL CASTING / ONE PIECE

15



DUO ROLLING STAND

CONTINUE GROUP MACHINES

ENGINE :DC 630 KW COMBINED GEARBOX :E= 33,0 MM.

ROLLING BENCH :E=330 MM. DUO SHAFT :SHAFT Ø 250 ROLLER :COUPLINGS

17



ENGINE :DC 630 KW COMBINED GEARBOX :E= 33,0 MM.

ROLLING BENCH :E=330 MM. DUO SHAFT :SHAFT Ø 250 ROLLER :COUPLINGS

CONTINUE GROUP STANDS

TYPE :DUO E=330mm

BODY :St 37 160x160 MM.

LOWER ROLL MOVEMENT :LIFTING JACK SYSTEM

UPPER ROLL MOVEMENT :PRESSURE BOLT SYSTEM

IRON BALCONY MATERIALS :St 37 /40 mm

RUNNER FIXING LUGS :GS 52 STEEL CASTING

CONNECTION BOLTS AND STUDS :Ç 1050 / CS53 DIN

TOP ROLLER LIFTING : 4/ PCS / SPRING SYSTEM

STAND BEDS :GS 52 STEEL CASTING / ONE PIECE

18



CONTINUE GROUP GEAR BOX

GEARBOZ TYPE :E=330 mm COMBINED PINION GEAR UNITS

GEAR TYPE : HELIX

GEAR MODULE :Mn 10

BEARINGS : URB

GEARBOX BODY :30 MM

19



CONTINUE GROUP SHAFTS

SHAFTS - 300

FLANGE DIAMETER A 250 mm

BORE AXIS B 220 mm

FATURA C 180 mm

TOP GEAR DIAMETER D 100 mm

GEAR WIDTH E 14 mm

FATURA BOYU F 4 mm

FLANGE THICKNESS G 32 mm

GEAR ROOT DIAMETER H 82 mm

BALL AND SOCKET JOINT AXIS K 150 mm

SHORT LENGTH OF SHAFTS Lz 1400 mm

BOLY HOLE DIAMETER I 23 mm

SPLITE WIDTH M 40 mm

SHAFT DIAMETER S 160 mm

20



ENGINE – TRANSMISSION JOINT COUPLINGS QUANTITY : 1 SET

COUPLINGS

CUTTING AND DOVETAIL SHEARS

21

AIR CLUTCH TYPE UM620 FLY SHEAR : 1PCS

AC 37.5 KW ENGINE : 1000d/min

MAX. SPEED : 4 m/sn

WORKING PRESSURE : 6 kg/cm²



FLY SHEAR

FINISH WAY

22

START STOP UM 720 FLY SHEAR : 1 PCS

DC 55 KW ENGINE : 1000 d/min

TOTAL LENGTH :20 MT

RELAY :20 PCS

RELAY DIAMETER :160 mm

RELAY ENGINE :20 PCS.1.1 KW



TYPE : SPLAY – CORNERS LOWERED TOTAL LENGTH :18 MT

TOTAL WIDTH :6 MT

SHEAR PISTON :1 PCS

SHEAR CUTTER LENGTH :300 mm

COOLING PLATFORM

HYDROLIC SHEAR

23

19



EQUIPMENT AND PROPERTIES

NO MATERIALS PROPERTIES AD. 1 FURNACE 2,5x17 MT FUEL OIL 1 2 BILLET CHARGE UNITS 100 TON CAPACITY CYLINDER 1

3 BILLET REMOVER BOOM

CHAIN MOVING STEEL CONSTRUCTION BOOM 1

4 FURNACE OUTPUT RELAY 6 PCS- 250 DIA RELAY GROUP 1

1.GROUP

5 ENGINE 1250 kW AC 1 6 FLY WHEEL 3,5 TON 1 7 GEAR BOX 1/9 RATIO DOUBLE STAGE 1 8 TRIO BOX 450 CENTER 1 9 COUPLINGS SET 3

10 TRIO ROUGHING STANDS 450 CENTER 240X220 TRIO 1

11 2-3 WORKBENCH 400 CENTER 200X200 2 12 ROUGHING SHAFTS 380 KARDAN SHAFTS 3

13 2-3 WORKBENCH KARDAN SHAFTS 350 KARDAN SHAFTS 4

14 ROUGHING ROLLER 1200 LENGTH-450 DIA- PEARLITIC 3

15 2-3 WORKBENCH ROLLER 800 LENGTH, 400 DIA 4

16 TABLE AND RELAY FIXED WAY 12 MT-10 MT-5 PCS- 7,5 KW ENGINE 1

17 CURVE 10 MM SHEET PLATE STEEL CONSTRUCTION 2

18 TABLE AND MOVABLE RELAY WAY 7 MT-10 MT 5 PCS- 7,5 KW ENGINE 1

2.GROUP 19 ENGINE 1000 kW AC 1 20 GEAR BOX 1/7 RATIO SINGLE STAGE 1 21 TRIO BOX 380 CENTER 1 22 SHAFTS 300 KARDAN 3 23 COUPLINGS SET 3 24 3-4-5 STAND DUO E=380 MM. 3 25 SHAFTS 300 KARDAN SHAFTS 4 26 ROLLER 700 LENGTH – 380 DIA 6

27 HYROLIC DOVETAIL SHEAR HYDROLIC CYCLINDERIC DOVETAIL SHEAR 1

28 CURVE 10MM SHEET PLATE STEEL CONSTRUCTION 2

25



CONTINUE 3. GROUP

29 TANDEM ENGINE 630 Kw DC 1

30 TANDEM COMBINED GEAR BOX E=340 MM. 1

31 TANDEM STAND DUO 340 MM CENTER 2 32 SHAFTS 250 KARDAN SHAFTS 4 33 CUUPLINGS SET 1 34 ROLLER 600 LENGTH 360 DIA 4 35 SHEAR UM620 DOVE TAIL SHEAR 1 36 COVER PATH 20 MM SHEEL PLATE STEEL CONSTRUCTION 1 37 FINISH ENGINE 630 Kw DC 1

38 FINISH COMBINED GEAR BOX E-320 MM 1

39 FINISH STAND DUO 320 MM CENTER 1 40 SHAFTS 250 KARDAN SHAFTS 2

41 ROLLER 600 LENGTH 340 DIA 2 42 COUPLINGS SET 1 43 LOOP SCAYNER 10MM SHEET PLATE STEEL CONSTRUCTION 1 44 PINCH ROLEY PYNEUMATIC PRESSURE ROLEY 1 45 FLY SHEAR UM 720 CLUTCH 1 46 ROLEY WAY AFTER FLY SHEAR 20 MT 1 47 COOLING PLATFORM 18MT SPLAY COOLING PLATFORM 1 48 CALIBRATION 12-32 MM CALIBER 1

49 CASE AND ROLLER GROUPS 12-32 MM CASE AND ROLLER GROUPS 1

50 ENGINEERING PROJECT AND GET THE WORK

PROJECTS DRAWING AND GET THE WORD DEPEND ON REQUIREMENT CAPACITY 1

51 ELECTRICAL PANELS AND AUTOMATION ELECTRIC PANELS AND ELECTRIC MOTORS 1

52 FRAME AND CONNECTORS LOWER FRAME AND ELECTRIC MOTORS 1

26



Center : 4. Sanayi Sitesi 129/7 Sokak No.9 Bornova / İZMİR / TURKEY • Tel :+90 232 375 56 51 Fax:+90 232 375 53 31

Fabric : Kemalpaşa Org. San. Bölg. Kemalpaşa Asfaltı 4. Çıkmaz No:3 Kemalpaşa / İZMİR / TURKEY • Tel:+90 232 877 02 72 Fax:+90 232 877 02 74

www.cesimak.com / [email protected]



Documents

Dosya Sunum Katalogurdtrengservices.com/owner/slider/201908095335Aug.pdfİZMİR / TURKEY, given service in the factory with the current 1500 m2 closed area with the local and international