Drawing Submission Consulatnts 15.06.2014

DRAWING SUBMISSIONREQUIREMENTS

FOR CONSULTANTS

العالم رؤيتنا: دول أفضل إحدى المتحدة العربية اإلمارات دولة لتصبح بفعالية نعمل أنوسالمة أمنا

CIVIL DEFENCE APPROVAL THROUGH DM’S BPCS SYSTEM

E-ENGINEERING DRAWING SUBMISSIONS NOT COMPLYING TO FOLLOWING REQUIREMENTS SHALL BE

REJECTED FROM SYSTEMIN EFFECT

FROM 16TH FEBRUARY 2014



THIS RULE WILL APPLY TO

EXISTING/CURRENT SUBMISSIONS

NEW SUBMISSIONS

MODIFICATION SUBMISSIONS


All files shall be in DWF Format for submissions through DM

All files shall be in PDF Format for direct submissions to DCD

1. TYPE OF FILES

TECOM JLT SILICON OASIS JAFZA


2. NUMBER OF FILES

The submission shall have only 5 attached files for the following 5 categories

a. Architecture_Life Safety (With TITLE page)

b. Fire Alarm_Emergency Lighting_Voice evacuation

c. Fire Fighting

d. Smoke Control

e. LPG System, if any.

DO NOT submit the following details/Files/attachments

×Structural details

×Drainage details

×Electrical details

×Flooring layouts

×Ceiling layouts

×Lighting

×Telecommunication details

×Plumbing


2. NAME OF FILES

NAME THE 5 PDF (Direct DCD Submission) FILES AS FOLLOWS, For example

98765XARCHITECTURE_CORNERSHOP

98765XFAXEMXVOICE_CORNERSHOP

98765XFIREFIGHTING_CORNERSHOP

98765XSMOKECONTROL_CORNERSHOP

98765XLPGSYSTEM_CORNERSHOP

Where 98765 is last five digits of your APPLICATION NUMBER

FA is FIRE ALARM

EM is EMERGENCY LIGHTING CORNERSHOP is your COMPANY NAME


2. NAME OF FILES

NAME THE 5 DWF (Through DM Submission) FILES AS FOLLOWS, For example

123-456XARCHITECTURE_CORNERSHOP

123-456XFAXEMXVOICE_CORNERSHOP

123-456XFIREFIGHTING_CORNERSHOP

123-456XSMOKECONTROL_CORNERSHOP

123-456XLPGSYSTEM_CORNERSHOP

Where 123-456 is PARCEL NUMBER

FA is FIRE ALARM

EM is EMERGENCY LIGHTING CORNERSHOP is your COMPANY NAME


2. NAME OF FILES

DO NOT name your files in any other manner

×Pdf.

×Untitled.

×16feb2014

×Fire.

×Binder.

×Civildefence

×Approval

×CORNERSHOP.

×Residential

×Fr


3. SIZE OF FILES

Each attached file can be maximum of 50 Mb

98765XARCHITECTURE_CORNERSHOP_part1 98765XARCHITECTURE_CORNERSHOP_part2 98765XARCHITECTURE_CORNERSHOP_part3

Total accumulated size of attached files can be maximum of 200 Mb If single file size exceeds 50 Mb, split your file into part 1, 2, 3, etc and

name them, for example, Architecture file as

5 PDF (Direct DCD Submission) FILE sizes shall be as follows.

5 DWF (DM Submission) FILE sizes shall be as per DM requirements.


3. SIZE OF FILES

DO NOT unnecessarily send number of smaller and incorrect files.

×Title page. 2Mb

×Ground floor. 2Mb

×First Floor. 3 Mb

×Second to roof. 6Mb

×Do not send files with error

×Do not put security restriction on your file

×Do not attach zip files


4. CONTENT OF FILES

Combined Architecture file shall have the pages / details as follows

4.1. ARCHITECTURE_LIFE SAFETY

Cover Page for stamping (1 Page) Setting out plan (1 Page) Fire access/ Road (1 Page) Floor plans (1 Page for each floor) Sections (2 Pages) Stair details (1 Page) Curtainwall /Cladding/ Roofing (1 Page) Door schedule (1 Page)

COMBINED TOGETHER IN ONE “ARCHITECTURE” FILE


4. CONTENT OF FILES

“ARCHITECTURE” FILE shall be color coded, on all floor plans as shown


FIRE ACCESS ROAD SHALL BE IN LIGHT

GREY COLOR

STAIR SHALL BE IN GREEN COLOR AND NUMBERED (Stair 1, Stair

2 etc)

EXIT CORRIDORS/ EXIT ACCESS CORRIDORS SHALL BE IN

LIGHT GREEN COLOR

2 HOUR FIRE RATED WALLS SHALL BE

SHOWN. AND SHOWN IN RED COLOR

1 HOUR FIRE RATED WALLS SHALL BE

SHOWN. AND SHOWN IN BLUE COLOR

GRID LINES SHALL BE SHOWN AND SCALE

SHOULD BE MENTIONED


4. CONTENT OF FILES

“ARCHITECTURE” FLOOR PLANS shall show travel distances, diagonal distances, dead-ends as shown


TRAVEL DISTANCE

DIAGONAL DISTANCE

ROOM USAGEAND AREA


4. CONTENT OF FILES

“ARCHITECTURE” FILE shall have EXIT SIGNS and legend on all floor plans as shown


SHOW EXIT SIGNAGE ONLY FOR EXITS, NOT

EACH DOOR

LEGEND SHOULD BE ON EACH FLOOR

PLAN


4. CONTENT OF FILES

“ARCHITECTURE” FILE shall show OCCUPANT LOAD Table


SHOW OCCUPANT LOADS/ FACTORS


4. CONTENT OF FILES

Combined ONE FILE for Fire Alarm, Emergency Lighting and Voice evacuation (FA_EM_VOICE) file shall have the pages / details as follows

4.2. FIRE ALARM, EMERGENCY LIGHTING AND VOICE EVACUATION

Floor plans showing Detectors, Emergency Lights and voice speakers (All in 1 Page for each floor) Typical Device Installation Details (1 Page) Riser Diagram for Fire Alarm System (1 Page) Riser Diagram for Emergency Light System (1 Page) Riser Diagram for Voice System (1 Page)

COMBINED TOGETHER IN ONE “FA_EM_VOICE” FILE


4. CONTENT OF FILES

Combined (FA_EM_VOICE) file shall be color coded as follows


SHOW DETECTORS, CALL

POINTS, SOUNDERS IN RED

COLOR

SHOW FIRE ALARM WIRING IN RED

COLOR AND VOICE SYSTEM WIRING IN CRIMSON COLOR

SHOW VOICE SPEAKERS IN

CRIMSON COLOR

SHOW ABOVE FALSE CEILING DETECTORS

WITH REMOTE RESPONSE INDICATORS

SHOW FIRE ALARM CONTROL PANEL (FACP) AND REPEATER PANEL

(FARP) LOCATION CLEARLY

SHOW EMERGENCY LIGHTS AND EXIT LIGHTS IN GREEN

COLOR


4. CONTENT OF FILES

Also Refer to LEGEND 10.2. Chapeter 19, UAE Fire and Life Safety Code

Color coded LEGEND Shall be mentioned on each page.

FIRE ALARM SYSTEM WIRING

VOICE EVACUATION SYSTEM WIRING

MS

EMERGENCY LIGHTING SYSTEM WIRING

E EMERGENCY LIGHT

DIRECTIONAL EMERGENCY SIGN

EMERGENCY EXIT SIGN



4. CONTENT OF FILES

Typical Device/Equipment Installation Shall be provided on one page



4. CONTENT OF FILES

Combined ONE FILE for Sprinkler System, Wet Riser, Pump System, Water Tank, Clean Agent, Foam System, Preaction System file shall have the pages / details as follows

4.3. FIRE FIGHTING

Floor plans showing Sprinkler Heads, Piping and Fire Hose Cabinets (All in 1 Page for each floor) Pipe sizes shall be shown clearly next to piping Pump Room Location and Details (1 Page) Riser Diagram for Sprinkler and Fire Hose System with Sprinkler Design criteria (1 Page) Design criteria table for Clean Agent, Foam System, Pre-action System shall be shown. (1 Page) Attach pdf file of Sprinkler/Clean Agent Hydraulic Printouts Legend shall be shown on each page. Typical Device Installation Details, including Sprinkler Heads, Hose Cabinet, Piping and Extinguishers (1 Page)

COMBINED TOGETHER IN ONE “FIRE FIGHTING” FILE


4. CONTENT OF FILES

Fire Fighting drawings shall be color coded as follows

4.3. FIRE FIGHTING

SHOW PUMP ROOM, PUMP AND

TANK DETAILS

SHOW SPRINKLER HEADS IN RED

COLOR

SHOW PIPE SIZES THROUGHOUT

SHOW SPRINKLER PIPE IN GREEN

COLOR


4. CONTENT OF FILES

Fire Fighting drawings shall be color coded as follows

4.3. FIRE FIGHTING SHOW CLEAN AGENT, FOAM SYSTEMS WITH NOZZLES, PIPE

SIZES AND STORAGE OF

AGENT

SHOW WET RISER PIPING IN BLUE

COLOR

SHOW FIRE EXTINGUISHERS IN

RED COLOR

SHOW HOSE CABINETS IN RED

COLOR

SHOW VALVE ASSEMBLIES IN RED

COLOR


4. CONTENT OF FILES

Typical installation details shall be shown on one page

4.3. FIRE FIGHTING

SHOW BREECHING INLET LOCATION


4. CONTENT OF FILES

ONE PAGE RISER DIAGRAM has to be part of fire fighting drawing. Refer to Figures 9.1 to 9.7, UAE Fire Code

4.3. FIRE FIGHTING

SHOW WATER TANK QUANTITY &

DETAILS

SHOW BREECHING INLET

SHOW PUMP CAPACITY AND SPECIFICATION

SHOW SPRINKLER PIPING AND WET

RISER PIPING

SHOW PIPE SIZES

SHOW ZONE CONTROL VALVES

(ZCV)

SHOW ALARM CHECK VALVES

(ACV)


4. CONTENT OF FILES

LEGEND shall be mentioned on each page. Refer to Figure 10.6, Chapter 19, UAE Fire Code

4.3. FIRE FIGHTING


4. CONTENT OF FILES

Combined ONE FILE for Stair pressurization, Corridor Smoke control and basement smoke extraction shall have the pages / details as follows

4.4. SMOKE CONTROL SYSTEM

Floor plans showing Stair Pressurization Ducts, Basement extraction ducts, Corridor smoke control ducts, Fans, Diffusers, Dampers, Extraction points, Supply points (All in 1 Page for each floor) Duct sizes shall be shown clearly next to Ducts. Duct Fire rating shall be shown clearly. Riser Diagram showing Smoke control schematic (1 Page) Design criteria shall be shown on the riser diagram Legend shall be shown on each page. Typical Equipment/Device Installation Details, including Fans, Ducts, Fire stopping, Dampers etc (1 Page)

COMBINED TOGETHER IN ONE “SMOKE CONTROL” FILE


4. CONTENT OF FILES

SMOKE CONTROL DRAWING shall be color coded as follows


SHOW DUCT LAYOUT

SHOW DUCT DIMENSIONS AND

FIRE RATING

SHOW FAN DETAILS AND FIRE

RATING

SHOW DIFFUSERS AND AIR FLOW

ARROWS


4. CONTENT OF FILES

SMOKE CONTROL DRAWING shall be color coded as follows


SHOW SHAFTS

SHOW FAN LOCATION AND

FAN DETAILS

SHOW DUCTING ON EACH FLOOR


4. CONTENT OF FILES

SMOKE CONTROL RISER Diagram shall be provided


SHOW FAN DETAILS AND FIRE

RATING

SHOW BASEMENT EXTRACTION WITH

FAN DETAILS

SHOW FOR ALL FLOORS


4. CONTENT OF FILES

Show typical Duct, Fan, Damper Installation details (1 Page)



4. CONTENT OF FILES

ONE FILE for LPG System shall have the pages / details as follows

4.5. LPG SYSTEM

Floor plans showing LPG pipe network, Control Valves, supply points, Gas detectors, Emergency switches, Control Panel, Filling Points (All in 1 Page for each floor) Location of LPG tanks with separation area clearly marked around the tanks. Pipe Type and sizes shall be shown clearly next to piping Shaft Fire rating shall be shown clearly. Riser Diagram showing schematic (1 Page) Legend shall be shown on each page. Typical Equipment/Device Installation Details, including LPG Tank , Piping through shafts, Fill Line Connection, detectors installation, containment arrangement, Control Panel installation etc with dimensions and sections. (1 Page)

COMBINED TOGETHER IN ONE “LPG SYSTEM” FILE


4. CONTENT OF FILES

ONE FILE for LPG System drawing shall be color coded as follows

4.5. LPG SYSTEM

SHOW SHAFTS2 HR SHAFT IN

RED COLOR

SHOW LPG PIPING AND FLOW ARROW IN

CRIMSON COLOR

SHOW LPG TANK IN CRIMSON COLOR WITH

CAPACITY

SHOW LPG PIPE SIZES

SHOW DISTANCE CLEARANCE


4. CONTENT OF FILES

ONE FILE for LPG System drawing shall be color coded as follows

4.5. LPG SYSTEM

SHOW LPG EMERGENCY SWITCHES, DETECTORS

SHOW KITCHEN LPG PIPING IN

CRIMSON COLOR

SHOW SHAFTS2 HR SHAFT IN

RED COLOR


4. CONTENT OF FILES

ONE PAGE for LPG System TYPICAL INSTALLATION details

4.5. LPG SYSTEM

SHOW FILLING POINT

SHOW TYPICAL INSTALLATION

DETAILS


4. CONTENT OF FILES

RISER SCHEMATIC should be provided.

4.5. LPG SYSTEM

SHOW TANK CAPACITY, PIPING

THROUGH SHAFTS, VALVES, GAUGES,

PRDPS WITH LEGEND.


COMMON AND BASIC REQUIREMENTS

a. All drawings should be to scale (1:100, 1:150)

b. Mention e-engineering application Number on the cover page.

PS-AAD-EEN-11-02-2014-98765

PROVIDE APPLICATION NUMBER ON COVER

PAGE

C. Provide Material/ Activity letter from owner for all warehouse, Industrial Projects.

LEAVE SPACE FOR ADDITIONAL COMMENTS


COMMON AND BASIC REQUIREMENTS

DO NOT submit drawings

×Without Scale (Check your soft copy for scale)

×Without check marking

×Without Reading checklist

×Without Cover page

×Without Application numbers

×Without reading e-Engineering user manual

×Without reading /understanding requirements of this presentation

×Without Material/ Activity Letter for Industrial/Storage projects

×Without Owner’s letter for electrical appliances usage if LPG is not required

×Without clearly mentioning and highlighting modified area and scope of work

×WITHOUT CHECKING YOUR SOFT COPY BEFORE UPLOADING

THANK YOU

Directorate of Civil DefenceUnited Arab Emirates TUNNEL FIRE SAFETY IN UAE


Hope you comply to these requirementsAnd help us to serve you better

And FASTER

Download UAE Fire and Life Safety Code of Practicehttp://www.dcd.gov.ae/download/preventionsafety/UAE_FIRE_AND_LIFE_SAFETY_CODE_OF_PRACTICE.pdf

Download e-engineering user manualhttp://www.dcd.gov.ae/download/E_ENGINEERING_HELP_MANUAL.pdf

http://www.dcd.gov.ae/download/preventionsafety/UAE_FIRE_AND_LIFE_SAFETY_CODE_OF_PRACTICE.pdf




http://www.dcd.gov.ae/download/E_ENGINEERING_HELP_MANUAL.pdf




Documents

Drawing Submission Consulatnts 15.06.2014