Upload
hatuyen
View
231
Download
2
Embed Size (px)
Citation preview
201 Northfield Road | Northfield Illinois, 60093, U.S.A. | Tel: 773.478.3515 | Fax: 773.478.3232 | www.bodine-electric.com | [email protected] 07481046.D 1
ISO9001:2008ISO
CER
TIF
IED
QUALITY MANAGEM
ENT S
YS
TEM
CER
TIF
IED
QUALITY MANAGEM
ENT S
YS
TEM
1. NOTE: N-models require minimum order quantities and lead-time.
e-TORQ™: Brushless DC Low Profile Motors
Continuous Rating Peak Ratings Motor ConstantsSpeed(rpm)
Torque(lb-in.)
Current (Amps)
Power Output (Watts)
Speed(rpm)
Torque(lb-in.)
Current(A-rms)
Ke (V/krpm)
Kt (lb-in./Amp)
Resistance(Ohms)
Inductance(mH)
ModelNumber.1
7 in. e-TORQ Motor, Flange Mount (130/260 VDC)2500/5000 20/19 5.5/5.3 590/1230 6000 200 45 42.50 3.88 2.16 1.5 N9411
7 in. e-TORQ Motor, Face Mount (130/260 VDC)2500/5000 20/16 5.5/4.6 590/1040 6000 200 45 42.50 3.88 2.16 1.5 N9410
14 in. e-TORQ Motor, Face Mount (130/260 VDC)1150 200 21 2700 2000 2000 200 96.1 8.22 0.119 0.090 N9430
Ideal for applications where lubricant leaks, gear noise or wear, and commutator wear are not acceptable. The e-TORQ motor delivers high torque and smooth low speed performance for applications such as semiconductor manufacturing, medical devices, automated assembly equipment and web printing.
Typical Applications
High Torque for Applications with Limited SpaceBodine e-TORQ motors are built for applications where space is at a premium. The low profile e-TORQ motors are available in axial lengths of less than four inches, with diameters ranging from 7 to 14 inches. The 7-inch diameter motor provides up to 20 lb-in. continuous torque. The standard 14-inch motor delivers more than 200 lb-in. at speeds of up to 1,200 rpm.
No Gearbox Requirede-TORQ’s high continuous and peak torque capability can allow, in certain applications, the elimination of costly gearboxes and reduce the risk of lubricant leaks.
• 7 and 14 inch diameter models available• No lubricants to leak• Zero maintenance• High accuracy, torque and reliability• Wide variety of feedback options• Long life, quiet operation
201 Northfield Road | Northfield Illinois, 60093, U.S.A. | Tel: 773.478.3515 | Fax: 773.478.3232 | www.bodine-electric.com | [email protected] 07481046.D 2
7-inch Flange Mount Dimensions 7-inch Face Mount Dimensions
XXX
72 +2/-1
74.5 +2/-1
.11
2.85 MAX.3.87 MAX.
AMP#748333-4 CONTACTSAMP#748364-1 HOUSING
2.75/3.25
.47/.53 TYP.
1.50 ±.03
[4] TAP 1/4-20, UNC-2B X .31 DEEP MIN. 90° APART
ON A ø2.755/2.745 B.C. ø2.000/1.997
.1875/.1855SQ. KEY
3.80/4.40
.502
.517
.588/.598FLAT
ø 7.125/7.135
ø3.51/3.49
1.00REF.
ø.6245.6240
72 REF.
90.0°
XXX1.50
ø.6245.6240
±.03
7.4 SQ. MAX.
.1875/.1855 SQx 1.12 KEY
.50 THICK FLANGE
.125
2.78 MAX
3.82 MAX.
.588/.598FLAT
90.0° APART ON 5.870/5.880 B.C.
[4] 3/8-16 UNC-2B X .50 DP. MIN
[4] THRU HOLES, .53/.54 DIA,90.0° APART ON 8.460/8.470 B.C.
ø4.500/4.497
45.0°
PILOT
R.50 REF.
74.5 +2/-1AMP#748333-4 CONTACTSAMP#748364-1 HOUSING
2.75/3.25
.47/.53 TYP.72 +2/-172 REF.
1.00
REF.
Improve efficiency, minimize size, and maximize torque with a custom e-TORQ built to precisely match your specifications. Ideal for OEM’s where high torque, very compact design, enclosed construction, and economy are required.
Options• Custom 7”, 9” and 14” diameter• Torque: up to 20 lb-in. for 7” diameter, up to 40 lb-in. for 9” diameter,
and up to 200 lb-in. for 14” diameter motor• Multiple windings at any voltages between 24–300 Volts
Custom 9-inch e-TORQ Motor
Visit www.bodine-electric.com/etorq to download up to date CAD drawings and 3-D models
e-TORQ™ Direct Drive Brushless DC Motors
Custom Solutions for Challenging Applications
© Copyright 2015. All rights reserved.