Upload
justin-allen
View
212
Download
0
Embed Size (px)
Citation preview
e
WHAT ARE THE BENEFITS OF INSTALLING A GREEN ROOF?
ENVIRONMENT
Heat and surface temperature reduction
Air quality improvement
ECONOMICALLY
Reduction in energy usage results in cost savings
THE SOCIETY
Increase in civic participation
AESTHETICS
Beautification of the environment
Singapore Sustainable Development Blueprint
targets to add 50 ha. of skyrise greenery by 2030.
… pilot incentive scheme…to green up rooftops…
www.nparks.gov.sg/skyrisegreenery
Green Roof System
e
STRUCTURAL DRAWING(Modular System)
The Pioneer in Sustainable & Ultra-low Maintenance Systems
GREEN ROOF SYSTEM
1
2
3
PLANTING MEDIA – Hi-Green Lite Composite
GREEN ROOF SYSTEM
* Note: In organic-mix systems, organic matter breaks down and contaminates the water. When there is poor drainage and the roots are submerged in the contaminated water for long, root rot occurs. Thus, plant sustainability becomes greatly reduced.
VS
In organic and soil-less
COMPARISON BETWEEN IN ORGANIC SOIL–LESS SUBSTRATE AND ORGANIC SOIL
Organic soil
-Absorb more water -Absorb less water
-Allow roots to breathe -Will solidified
-Will not contaminate water -Will grow bacteria
Material: High density polypropylene resin with anti-UV additive
Dimensions (mm): 500(L) X 500(W) X 130(H)
Unit weight (kg): Approx. 1.7
Water retention capacity: 8.5 L/ tray; 34 L/ m2
Saturated weight (kg): Approx. 30
Colour: Green
PLANTING TRAY - HI-GREEN Planter R Specifications
GREEN ROOF SYSTEM
GREEN ROOF SYSTEM
INSTALLATION METHOD
1. Put geotextile
2. Spread Hi-Green Lite Composite (planting media) evenly
3. Plant shrubs
Planter trays are secured by the “Interlocking groove device”
ITE College West
Three Months Pre-growing Period At Prince’s Nursery
PAST JOB REFERENCES
Vertical Wall System Panel System
e
VERTICAL WALL SYSTEM
CHARACTERISTICS
Dimension
480(L) x 450(W) x 110(D) mm
Easy installation
Stainless steel
Stable
Easy Installation
Easy Replacement with Modular System
Lush and Natural
450
450
366346
110
Front Elevation Of Hi-Green Vertical Wall System
VERTICAL WALL SYSTEM
1000 1000
470 470 470 470430 430 430430
Isometric View Of Hi-Green Vertical Wall System
VERTICAL WALL SYSTEM
120 20
METHODOLGY
VERTICAL WALL SYSTEM
1. Fabricating the panel and wire mesh*
2. Laying the black netting and geotextile fabric
3. Filling the panel with Hi-Green Lite Composite
4. Covering with geotextile fabric
5. Sealing the panel with cable-tie
6. Finished panels
METHODOLGY
VERTICAL WALL SYSTEM
8. Planting into the panel9. Panels for watering and
stabilization in nursery
10. Panels placed in racks to be transported to site
11. Panels to be installed onto steel frames
7. Cutting the panel for planting
12. Finished Product
Planting Tray – Hi-Green Planter system
Material: High density polypropylene resin with anti-UV additive
Dimension (mm): 500 (L) x 115 (W) x 170 (H)Unit weight (kg): Approx. 0.7No. of cells: 2 x 10Water storage capacity: Approx. 2.3 litres per unitSaturated weight: 6 – 8 kg per unitColour: Green
HI-GREEN ECO SYSTEM
HI-GREEN ECO SYSTEM
1) Fabricate a wire mesh structure 2) Fabricate a fibre glass tank3) Pre-grow the selected plants from 3 months4) Hook every planter boxes onto the wire mesh
structure5) Fill up the fibre glass tank with Hi-Green Lite
Composite6) Run irrigation pipe to every planter boxes7) Fill up water on the fibre glass tank
For enquiries please contact:Office: +65 6763 7000Web: www.princelandscape.com Email: [email protected] Terance Seah: +65 9380 7966Kilon Koh: +65 9796 8265
e
Visit us @ www.princelandscape.com
Thank You
e
Q & A
e