ELECTRO-VOICE Dx46

je technicky rovnaký ako

Dynacord DSP600

Dx46

Dx46

2-in-6 FIR-Tune Sound System Processor

Čo je nové

• 6 Channels of 512-Tap FIR Filters

• Software IRIS-Net pre ovládanie viacerých procesorov aj spolu s ďaľšími zariadeniami

• Možnosť ovládania cez Ethernet a / alebo USB

• Zabudovaný Tone a Noise Generator

• Kompletná výbava

Dx46

2-in-6 FIR-Tune Sound System Processor

Key Features

• Analógové a digitálne vstupy

• Dual Core DSP

• 24 Bit AD/DA, 48 kHz double precision processing

• 512 taps FIR filters (factory presets)

• Dynamics > 116 dB / THD+N < 0,002%

• Ethernet network with Ethernet switch

• IRIS-Net GUI

• Compatible with RCM-26 speaker settings

• Wide Voltage Supply Range: 100 – 240V AC / 50 – 60 Hz

Dx46

2-in-6 FIR-Tune Sound System Processor

Signal Flow Diagram

Dx46

2-in-6 FIR-Tune Sound System Processor

Možnosť konfigurovať

• 2-way stereo + Fullrange

• 3-way stereo

• 4-way mono + Fullrange

• 5-way mono + Fullrange

• 3-way stereo with a mono sub + Fullrange

• 4-way stereo with mono sub and low frequency

• freely assignable 2 x 6 matrix router

Dx46

2-in-6 FIR-Tune Sound System ProcessorF.01U.126.852

Matrix Router / Mixer• Two inputs (stereo) Analogue A/B or AES/EBU• Summed A/B (mono) input• Six assignable outputs

Vstupy

• Pilot tone detection • Test Signal Generator• VU Metering of input signal• 10-band parametric equalizer• 31-band graphic equalizer• Delay

Dx46

2-in-6 FIR-Tune Sound System Processor

Výstupy (každý)

• Array control (5-band equalizer +delay)• Cross-over (hi-pass / low-pass filters), with selectable filter types• 6-band parametric equalizer• FIR filter with 512 Taps • Delay• Polarity

• Look-ahead Peak limiter with Peak RMS detection. Thermal limiter pre ochranu reproduktorov• Level & Mute• Pilot tone generator• VU Metering• Output assignment display LEDs; sub, low, mid & high• Mute tlačítka• Gain reduction meters

Dx46

2-in-6 FIR-Tune Sound System Processor

4 x Delay Setting

MASTER-DELAY:Pre nastavenie medzi

systémami(Hlavný systém / Delay systém)

ARRAY-DELAY:Pre nastavenie individuálnych

častí clustra alebo zostavy

X-OVER-DELAY: pre jednotlivé

drivery vnútri reprosústav

CHANNEL-DELAY: Pre nastaveniereprosústav

(tops and subs)

Dx46

2-in-6 FIR-Tune Sound System Processor

Additional features• Electronically balanced XLR inputs and outputs• XLR thru connectors (analog + AES/EBU)• -6 dB switchable input level pad• Test signal generator (Sine, pink noise, white noise)• Contact closure interface (Phoenix type) providing 5 control inputs• USB port (front) and RJ-45 Ethernet port with Ethernet switch (rear) for connection to PC with IRIS-Net software; preset editing and real time parameter control and monitoring.• Firmware updates via USB port or Ethernet port• FLASH memory for preset storage and firmware upgrades• 192 x 32 back-light graphic LCD display• LCD navigation / editing controls• DSP block direct access controls

Dx46

IRIS Net - Software pre ovládanie Dx46 a diaľkovo ovládaných zosilňovačov

Dx46