Upload
alemupa
View
119
Download
3
Embed Size (px)
Citation preview
qwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbn
Practica 9
TARJETA PRINCIPAL
08/04/2013
AleJANDRA MUÑOZ PALACIOS,AARON TALAVERA ARAIZA,ERNIE TERRAZAS NAVARRO.
Practica 9
Tarjeta principal
Objetivo:
El alumno podrá instalar una tarjeta principal de un equipo de computo.
Material:
Tarjeta principal.
Equipo:
-Gabinete
-tarjeta principal
Herramientas:
-Desrmador
Procedimiento:
1-desconecte el cable de electricidad.
2-retire la cubierta del CPU, quitando los tornillos que la sujetan.
3-ponga la tarjeta en el gabinete y apunte los orificios que coinciden con los de la tarjeta principal y ponga los sujetadores para atornillar la trarjeta.
4-coloque la tarjeta madre en su lugar y atornillarla.
5-colocar los cables de los indicadores del panel frontal, interruptor y del reset asi como del USB si es el caso.
6-coloque el procesador y su abanico.
7-coloque los modulos de memoria RAM.
8-coloque los cables IDE o ATA si es el caso y el floppy.
9-coloque los cables en la fuente de poder.
651-M V1.0 - ECS Elitegroup
DDR 333USB 2.06 Channel AudioColor Map10/100 Lan (Optional)ATA133PROCESSORS
Socket 478 for Intel Pentium 4 processorsFSB
533/400MHzCHIPSET
SiS® 650GX B0 & 962LMEMORY
2x184-pin DIMM sockets support two 2.5V DDR SDRAMs (DDR333/266)Maximum: 2GBEXPANSION SLOTS
1 AGP (4X)
2 PCI slots1 CNR slot
LAN
VIA® VT6103L 10/100 Mbps Faster Ethernet controller (optional)AUDIO
Audio: CMI9737A 6-Channel codec Compliant with AC97 2.2 specificationIDE
2 UltraDMA 133 / 100 / 66BACK PANEL I/O PORTS
1 x PS/2 keyboard1 x PS/2 mouse1 x Parallel Port1 x Serial Port4 x USB 2.0 Ports1 x RJ 45 Port1 x Audio I/O (Line-in, Line-out and Mic-in)1 x VGA PortINTERNAL I/O CONNECTORS & HEADER
20-pin ATX Power Supply connector4-pin ATX 12V Power Supply connectorDual PCI IDE interfaces, 4 IDE devices360K~2.88M Byte, 3 Mode FDDs or LS1201 x CD-in header, 1X USB card reader header1 x USB 2.0 header support additional 2 USB ports (USB3)HDD LED, ACPIMSG LED, Reset Switch, Power Switch headersCPU / Chassis FAN headersFront Panel MIC/Line-in out headerSYSTEM BIOS
Award 2Mb Flash EEPROMSupports Plug and Play 1.0A, APM 1.2, Muli Boot, DMIFull Support for ACPI revision 1.0 specification
microATX Form Factor, 244*220mm
Conclusion: Apredimos a armar una computadora nueva y
desmontar una vieja.