Europass Curriculum Vitae - ici.ro · PDF fileDetectie si diagnoza (fault detection) in semnale si sisteme cu aplicatii in analiza semnalelor seismice, detectia schimbarilor in structuri

Europass

Curriculum Vitae

Informatii personale

Nume / Prenume Popescu Theodor Dan Adresa Soc. Colentina, Nr. 55, Bucuresti 021163, Romania

Telefon +40-21-316-07-36

Fax +40-21-316-10-30

E-mail [email protected]

Nationalitate Romana

Data nasterii 4 Iulie, 1949

Sex M

Locul de munca vizat/Domeniul ocupational

Institutul National de Cercetare Dezvoltare in Informatica Cercetator stiintific principal gradul I

Experienta profesionala

Perioada iulie 1990 - prezent

Functia sau postul ocupat Cercetator stiintific principal gradul I

Activitati si responsabilitati principale Director/responsabil proiecte privind: modelarea sistemelor, identificarea si estimareaparametrilor sistemelor, analiza si predictia seriilor de timp, prelucrarea numerica asemnalelor, detectia si diagnoza in semnale si sisteme, analiza componentelorindependente, analiza timp-frecventa; loctiitor sef departmente.

Numele si adresa angajatorului Institutul de Cercetari īn Informatica (ICI) 1990-1996 Bd. Averescu, nr. 8-10, Bucuresti 011455, Romania

Institutul National de Cercetare-Dezvoltare in Informatica 1996 - prezentBd. Averescu, nr. 8-10, Bucuresti 011455, Romania

Tipul activitatii sau sectorul deactivitate

Cercetare-Dezvoltare

Perioada noiembrie 1983- iunie 1989

Functia sau postul ocupat Cercetator stiintific principal gradul III

Activitati si responsabilitati principale Cercetare-dezvoltare-inovare privind: modelarea sistemelor, identificarea si estimareaparametrilor sistemelor, analiza si predictia seriilor de timp, prelucrarea numerica asemnalelor, detectie si diagnoza in semnale si sisteme; responsabil teme/proiectecercetare.

Numele si adresa angajatorului Institutul Central pentru Conducere si Informatica (ICCI) 1983-1985Bd. Miciurin (in prezent Bd. Averescu), nr. 8-10, Bucuresti 011455, Romania.

Institutul de Cercetare Stiintifica si Inginerie Tehnologica pentru Tehnica de Calcul si Informatica, Directia Informatica 1985-1989

Bd. Miciurin (in prezent Bd. Averescu), nr. 8-10, Bucuresti 011455, Romania.



Perioada iulie 1977- octombrie 1983

Functia sau postul ocupat Cercetator stiintific

Activitati si responsabilitati principale Cercetare-dezvoltare privind: analiza si proiectarea sistemelor informatice,modelareaidentificarea si estimarea parametrilor sistemelor, proiectarea asistata de calculator asistemelor de conducere automata, sisteme adaptive, conducerea cu calculator aproceselor si instalatiilor tehnologice.

Numele si adresa angajatorului Institutul Central pentru Conducere si Informatica (ICCI) Bd. Miciurin (in prezent Bd. Averescu), nr. 8-10, Bucuresti 011455, Romania.



Perioada septembrie 1972- iunie 1976

Functia sau postul ocupat Inginer

Activitati si responsabilitati principale Cercetare-dezvoltare privind: analiza si proiectarea sistemelor informatice,modelarea,identificarea si estimarea parametrilor sistemelor, proiectarea asistata de calculator asistemelor de conducere automata, sisteme adaptive, conducerea cu calculator aproceselor si instalatiilor tehnologice.

Numele si adresa angajatorului Institutul Central pentru Sisteme de Conducere cu Mijloace de Automatizare (ICSCMA) Bd. Miciurin (in prezent Bd. Averescu), nr. 8-10, Bucuresti 011455, Romania. 1972-1973

Institutul Central pentru Conducere si Informatica (ICCI) Bd. Miciurin (in prezent Bd. Averescu), nr. 8-10, Bucuresti 011455, Romania. 1973-1976



Perioada 1975-1983, 1991-1992, 1995-1998

Functia sau postul ocupat Cadru didactic asociat : asistent, sef lucrari, conferentiar

Activitati si responsabilitati principale Cursuri, seminarii, conducere proiecte de diploma

Numele si adresa angajatorului Universitatea “Politehnica” Bucuresti, Facutatea de Automatica si Calculatoare


Activitate educationala in domeniile programarii calculatoarelor, identificarii sistemelor

Perioada 1992-1995

Functia sau postul ocupat Cadru didactic asociat : conferentiar

Activitati si responsabilitati principale Cursuri, seminarii, conducere proiecte de diploma

Numele si adresa angajatorului Universitatea AISTEDA Bucuresti


Activitate educationala in domeniul analizei datelor experimentale si prelucrarii semnalelor

Perioada 1989

Functia sau postul ocupat Cadru didactic asociat

Activitati si responsabilitati principale Cursuri, seminarii

Numele si adresa angajatorului Academia Militara, Bucuresti


Activitate educationala in domeniul identificarii semnalelor, proiectarii asistate de calcularora sistemelor de conducere, sisteme adaptive (autoacordabile) cursanti straini.

Perioada 1977-1989

Functia sau postul ocupat Cadru didactic asociat

Activitati si responsabilitati principale Cursuri, seminarii, lucrari de laborator

Numele si adresa angajatorului Centrul de Informatica Industriala, Institutul Central de Informatica, Bucuresti


Activitate educationala in domeniul identificarii semnalelor, proiectarii asistate decalcularor a sistemelor de conducere, conducerea cu calculator a proceselor siinstalatiilor industriale.

Educatie si formare

Perioada 5-31 mai 2002

Calificarea/diploma obtinuta Honorary Visitor

Disciplinele principale studiate/competente profesionale obtinute

Detectia si diagnoza schimbarilor in semnale si sisteme

Numele si tipul institutiei deinvatamant/ furnizorului de formare

Department of Electrical Engineering, Melbourne University, Australia

Nivelul in clasificarea nationala sauinternationala

Honorary Visitor

Perioada 1-30 septembrie 1999

Calificarea/diploma obtinuta DAAD Fellowship




Safety Control Engineering Department, Wuppertal University, Germany


Studii post-doctorale

Perioada 1-30 iunie 1999

Calificarea/diploma obtinuta JSPS Fellowship




Department of Information and Knowledge Engineering, Tottori University, Japan



Perioada 1 martie -30 aprilie 1996

Calificarea/diploma obtinuta JSPS Fellowship


Detectie si diagnoza in modelele dinamice


Department of Information and Knowledge Engineering, Tottori University, JapanDepartment of Control Engineering and Science, Kyushu Institute of Technology, Japan



Perioada 1 septembrie -31 octobrie 1996





Safety Control Engineering Department, Wuppertal University, Germany



Perioada 1 -30 noiembrie 1992

Calificarea/diploma obtinuta The Royal Society Fellowship


Modelarea si predictia seriilor de timp in sistemele de mediu


CRES Department, University of Lancaster, Great Britain



Perioada 1 iulie -30 septembrie 1992



Modelarea si identificarea sistemelor. Instrumente software


Ruhr University, Bochum, Germany



Perioada aprilie 1978 – iunie 1983

Calificarea/diploma obtinuta Diploma de doctor-inginer


Sisteme adaptive si autoacordabile (conducator stiintific Prof. dr. ing. Sergiu Calin)


Universitatea “Politehnica” Bucuresti, Facultatea de Automatica si Calculatoare


Studii doctorale

Perioada septembrie 1967 - iunie 1972

Calificarea/diploma obtinuta Diploma de inginer automatist (media absolvire 9.29, nota examen de diploma 10)


Automatica, Calculatoare


Universitatea “Politehnica” Bucuresti, Facultatea de Automatica si Calculatoare


Studii universitare

Perioada septembrie 1963 – iunie 1967

Calificarea/diploma obtinuta Bacalaureat


Matematica, Fizica


Liceul Nr. 2, Rosiori de Vede, Teleorman


Studii liceale

Aptitudini si competentepersonale

Limba materna Romana

Limbi straine cunoscute

Autoevaluare Intelegere Vorbire Scriere

Nivel european (*) Ascultare Citire Participare laconversatie

Discurs oral Exprimare scrisa

Limba C1 Franceza C1 Franceza C1 Franceza C1 Franceza C1 Franceza

Limba C1 Engleza C1 Engleza C1 Engleza C1 Engleza C1 Engleza

(*) Common European Framework of Reference for Languages

Competente si abilitati sociale 1. Spirit de echipa, rezultat in urma lucrului in echipa de peste 45 de ani. 2. Capacitate de adaptare la medii multiculturale, obtinuta ca urmare a lucrului in echipa instrainatate. 3. Capacitate de comunicare, ca urmare a relatiilor de colaborare, schimb de informatii siexperienta cu diferite colective din tara si strainatate.

Competente si aptitudiniorganizatorice

A.In Romania

1. Director si responsabil proiecte din Planul de Stat si Departamental, granturi interne siinternationale (33 proiecte interne, 2 proiecte internationale), Principal Investigator la peste120 proiecte si contracte. 2. Director monitorizare al Programului National de Cercetare-Dezvoltare INFOSOC(Information Society) (2001-2004).3. Membru al Comisiei de Evaluare a Programului National de Cercetare-DezvoltareINFOSOC (Information Society) (2001-2004).4. Membru al Comisiei de Stiinta si Tehnologia Informatiei a Academiei Romane pentruacordarea GAR (1995, 1996, 1997, 1998, 1999, 2000, 2003, 2005, 2007).5. Membru al Comisiei de Stiinta si Tehnologia Informatiei si a Comisiei de Stiinte Tehnice aANSTI pentru acordarea de granturi (1999, 2000).6. Membru al Comisiei de Evaluare 7.3 “Automatica, Calculatoare” a ProgramuluiRELANSIN, AMCSIT – Politehnica (1999, 2000, 2002, 2004).7. Expert evaluator PNII, CEEX, CNCSIS 8. Expert evaluator al Australian Research Council (ARC) ( 2004-prezent) 9. Expert evaluator proiecte din Fonduri structurale din cadrul Axei prioritare III –Tehnologia Informatiei Si Comunicatiilor (TIC) pentru sectoarele privat si public, ProgramulOperational Sectorial Cresterea Competitivitatii Economice (POS CCE) (2009-prezent). 10. Participare la elaborarea de Planuri strategice in domeniul TIC pentru perioada 2009-2011 (10 domenii). 11. Responsabilitati: Adjunct sef Laborator :”Calculatoare de Proces” (1990-1999), SefGrup “Sisteme Inteligente si Prelucrarea Semnalelor” (2000-2002), Adjunct sefDepartament “ Sisteme si Aplicatii in e-Mediu, e-Energie, e-Transport, e-Guvernare” (2009-2012). 12. Membru al Consiliului Stiintific al ICI (1995-2016) si presedinte (2005-2009)13. Membru al Consilului de Administratie al ICI (2005-2009)14. Membru al Colegiului Consultativ pentru Cercetare, Dezvoltare si Inovare al ANCS(2006-2011).15. Presedinte al Comisiei de Subventionare a Literaturii Tehnico-Stiintifice a ColegiuluiConsultativ pentru Cercetare, Dezvoltare si Inovare al ANCS (2006-2011).16. Membru al Sectiunii Control Systems Society, Sectia Romana IEEE din 2001.17. Membru fondator al Societarii Romane a Fostilor Bursieri DAAD (SOFDAAD), 1993. 18. Membru fondator al Societarii Romane a Fostilor Bursieri JSPS, 2011.19. Membru al unor comisii de acordare a titlului de doctor-inginer la Universitatea“Politehnica” Bucuresti, Universitatea “Dunarea de Jos” Galati, Universitatea “GheorgheAsachi” Iasi.

B. In strainatate

1. Granturi: SINICA Academy , PR China (1988, 1997), KU Leuven Belgium (2000),SOROS Foundation (1994, 1997), DAAD (1992, 1995,1999), The Royal Society (1992),JSPS (1996, 1999), DAAD Alumni Program - Equipment Grant (2001), CERGE – EIFoundation (2001), Australian Research Council (2002), Spatial Co Kuwait (2009), GrantConferinta ICONIP’2012, Doha, Qatar (2012). 2. Senior member al IEEE (din 2002). 3. Membru al IEEE Control System Society (din 1998). 4. Membru al IEEE Signal Processing Society (din 2002). 5. Membru al IFAC Technical Committee SAFEPROCESS (Fault Detection, Supervisionand Safety of Technical Processes) (1996-1999).6. Membru al IEEE Process Control Committee (1999-2002).7. Membru al WSEAS Automatic Control Technical Committee (2003). 8. Membru al KES Journal Board of Reviewers, at International Journal on KnowledgeBased Intelligent Engineering Systems, IOS Press , Netherlands, ISSN: 1327-2314. 9. Membru al Control Engineering Practice journal book reviewers, Pergamon Press.10. Membru al College of Experts, The Australian Research Council (ARC) (2004).

11. Membru al Editorial Board al Journal of Vibration Analysis, Measurement, and Control, Columbia International Publishing, ISSN: 2162-9846 (din 2010). 12. Membru al Editorial Board al Recent Patents on Signal Processing , Bentham Science Publishers Ltd., ISSN 2210-6863 (din 2011).

http://www.benthamscience.com/open/rptsp/index.htm

http://uscip.org/JournalsDetail.aspx?journalID=45

13. Membru al Editorial Board al International Journal of Engineering and Technology (IJET), ISSN: 1793-8236 (din 2016).14. Membru al Editorial Board al revistei Studies in Informatics and Control, Informatics and Control Publications, ISSN: 1220-1766 (din 1995)

Competente si aptitudini tehnice 1. Metode, tehnici si module program asociate pentru identificarea si proiectarea asistatade calculator a sistemelor automate. 2. Metode, tehnici si module program asociate pentru controlul adaptiv al sistemelor (self-tuning control). 3. Dezvoltarea si implementarea de algoritmi pentru modelarea si predictia seriilor de timpcu aplicatii in analiza semnalelor biomedicale (EEG), analiza semnalelor acustice si devibratie, inclusiv seismice, modelarea sistemelor ecologice si hidrologice. 4. Detectie si diagnoza (fault detection) in semnale si sisteme cu aplicatii in analizasemnalelor seismice, detectia schimbarilor in structuri supuse unor incarcari extreme,monitorizarea proceselor industriale si a instalatiilor industriale. 5. Analiza Componentelor Independente si Separarea “Oarba” a surselor cu aplicatii inanaliza semnalelor biomedicale (EEG, MEG), supravegherea si monitorizarea barajelor siconstructiilor hidrotehnice, monitorizarea proceselor si a instalatiilor industriale, analizavibratiilor induse de trafic, in vederea monitorizarii structurilor. 6. Programare in Fortran si Matlab, dezvoltarea de biblioteci si pachete de programe:SIPAC (pachet de programe interactiv pentru identificarea si proiectarea asistata decalculator a sistemelor automate), IDENT (bibliteca de programe pentru identificarea siestimarea parametrilor sistemelor), STATIST, SIMPACK (pachete de program interactivepentru statistica si respectiv simularea sistemelor), TIMES, TIMESS (biblioteci de programepentru modelarea si predictia seriilor de timp), TS-System (pachet de programe interactivpentru modelarea si predictia seriilor de timp utilizand metodologia Box-Jenkins), IDPACK(pachet de programe interactiv pentru identificarea si estimarea parametrilor sistemelor),CHANGE (pachet de programe interactiv pentru detectia schimbarilor), precum si modulesoftware in Matlab pentru Analiza Componentelor Independente si Analiza Timp-Frecventa.

Competente si aptitudini deutilizare a calculatorului

Limbaje de programare : BASIC, CSMP, FORTRAN, MATLAB

Sisteme de operare: MS-DOS, Windows NT, Windows 2000, Windows XP, Windows 7

Altele: Microsoft Office Professional 2007, LaTeX, MikTeX, WinEdt

Competente si aptitudini artistice Desen, Design, Literatura

Alte competente,aptitudini,activitati

Conducere Sectiuni tehnice : “Application of Computer Control in Science”, la 2ndIFAC/IFIP Symposium on Software for Computer Control SOCOCO'79, Prague, CzechRepublic, June 1979, “Model Based Diagnosis”, la IFAC Symposium on Fault Detection,Supervision and Safety for Technological Processes, SAFEPROCESS'94, Espoo, Finland,June 1994, “Applications I” la 4th IFAC Conference on System Structure and Control(SSC'97), Bucharest, Romania, October 23-25, 1997, “Neuro-Fuzzy Techniques andApplications” al 2nd International Symposium on Intelligent Automation and Control(ISIAC'98), World Automation Congress (WAC'98), Anchorage, Alaska, USA, May 9-14,1998, “Signal Processing Systems”, la 7nd International Multiconference on CircuitsSystems, Communications and Computers (CSCC'2003), Corfu Island,Greece, July 7-10,2003, Sesiune speciala organizata de Industrial Information Technology Committee la IEEEInternational Symposium on Industrial Electronics ISIE'06 ETS-Downtown Montreal,Quebec, Canada, 9-13 July 2006, „Identification and Estimation III”, la the 6-th IEEEInternational Conference on Control and Automation (IEEE ICCA'07), May 30-June 1, 2007,Guangzhou, China, “Speech and Image Processing Systems; Analysis and Segmentation”la 11-th WSEAS International Conference on Systems, July 23-25, 2007, Agios Nikolaos,Crete Island, Greece, “Modelling of Control Systems” la 14-th IEEE MediterraneanElectrotechnical Conference MELECON'2008, Ajaccio, France, May 5-7, 2008, “AdvancedMathematical Models II”, la Mathematical Models for Engineering Science(MMES'10),International conference of the Institute for Environment, Engineering, Economics andApplied Mathematics (IEEEAM), Puerto De La Cruz, Tenerife, Spain, November 30-December 2, 2010, „Applied Mathematics in Engineering Sciences” , The 5th InternationalConference on Applied and Computational Mathematics (ICACM'16), Playa de Palma,Mallorca, Spain, August 19-21,2016.

Organizator si Chaiman Sesiuni Invitate: “CACSD for Fault Detection – Applications” laIEEE Symposium on Computer-Aided Control System Design (CACSD'96), Dearborn,Michigan, SUA, September 15-17, 1996, “System Change Detection, Robustness andIsolation” la 2nd International Symposium on Intelligent Automation and Control(ISIAC'98), World Automation Congress (WAC'98), Anchorage, Alaska, USA, May 9-14,1998.

Organizator Sesiuni Invitate: “Fault Detection and Diagnosis” la IEEE Symposium onComputer-Aided Control System Design (CACSD'99), Cohala Coast, Hawaii, SUA, August22-27, 1999, “Fault Detection and Isolation in Dynamical Systems – Applications” la IEEEInternational Conference on Control Applications (CCA'99), Cohala Coast, Hawaii, SUA,August 22-27, 1999, “Estimation and Fault Detection” la 3rd International Symposium onIntelligent Automation and Control (ISIAC'2000), World Automation Congress (WAC'2000),Maui, Hawaii, SUA, June 11-16, 2000, “Engineering Techniques and Development ofIntelligent Systems”, la Knowledge-Based Intelligent Information & Engineering SystemsConference (KES'2004), Wellington, New Zealand, September, 20-24, 2004.

Membru al mai multor International Program Committees la mai multe simpozioane,conferinte si congrese international organizate de IEEE, IFAC, etc.

Editor Asociat la The IEEE International Conference on Control Applications (CCA' 06),4-6 October, 2006, Munich si The 2-nd IEEE International Conference on Control andFault- Tolerant Systems (SysTol13) , 9-11 October, 2013, Nisa, France,

Recenzent articole reviste ISI: IEEE Transactions on Signal Processing , ISSN 1053-587X , IEEE Transactions on Systems, Man, and Cybernetics – Part C, ISSN: 1094-6977, IEEE Signal Processing Letters, ISSN : 1070-9908, Flow Measurement andInstrumentation Journal, ISSN: 0955-5986, Elsevier, International Journal on KnowledgeBased Intelligent Engineering Systems , IOS Press, Netherland, ISSN: 1327-2314,Mechanical Systems and Signal Processing, ISSN: 0888-3270, Elsevier, Digital SignalProcessing, ISSN: 1051-2004, Elsevier, Neural Computing and Applications, ISSN: 0941-0643, Springer, Control Engineering Practice , ISSN: 0967-0661, Elsevier.

Permis de conducere Categoria B

Informatii suplimentare Conferinte si seminarii la Central Institute of Cybernetics and Information Processes,Berlin, Germany (1986), Institute of Systems Science and Institute of Technology, Beijing,PR China (1988), Center Studies for Environmental Systems, Lancaster University, GreatBritain (1992), Safety Control Engineering Department, Wuppertal University, Germany(1995), Department of Electrical and Electronic Engineering, Faculty of Engineering, OitaUniversity, Japan, Kyushu Institute of Technology (seminar organizat de Japan Society ofInstrument and Control Engineers -SICE), Japan, Department of Electrical Engineering,Saga University, Japan (1996), Department of Information and Knowledge Engineering,Tottori University, Japan, Department of Mechanical and System Engineering, KyotoInstitute of Technology, Japan (1999), CERGE –EI, Prague, Czech Republic (2002), SpatialCo. Kuwait (2009), in calitate de invitat.

Premiul "Tudor Tanasescu" al Academiei Romane 1995 pentru lucrari in domeniul“Detectiei si diagnozei schimbarilor in semnale si sisteme”

Premiul Asociatiei Generale a Inginerilor din Romania in 2000, Sectia “TehnologiaInformatiei” pentru lucrarea “Serii de Timp. Aplicatii in Analiza Sistemelor”, Editura Tehnica,Bucuresti, 2000, 567 pp.

Premiul pentru cea mai buna lucrare prezentata la “The 4-th ICSC InternationalConference on Soft Computing and Intelligent Systems for Industry”, in 28.06.2001,University of Paisley, Scotland, UK.

Australian Research Council (ARC) citat ca "expert of international standing" , 2003.

Referinte:

Prof. K. H. Fasol, Automatic Control Department, Bochum University , Germany

Prof. P. Muller, Safety Control Engineering Department,, Wuppertal University ,Germany

Prof. K. Kumamaru, Kyushu Institute of Technology, Japan

Prof. K. Uosaki, Department of Information and Physical Sciences, Osaka University,Osaka, Japan

Prof. Akira Ohsumi, Department of Mechanical and System Engineering, Kyoto Institute ofTechnology, Japan

Prof. I. Mareels, Department of Electrical Engineering, Melbourne University, Australia

Data: 9 iunie, 2017 Dr. Theodor Dan Popescu

Anexa 1

Lista selectiva de publicatii

Theodor D. PopescuInstitutul National de Cercetare-Dezvoltare in Informatica Bd. Alexandru Averescu, Nr. 8-10, 011455 Bucuresti, Romania Tel: +40-21-316 07 36 Fax: +40-21-316 10 30Email: [email protected], [email protected]://www.ici.ro/ici/homepage/thpopescu.htm https://scholar.google.com/citations?user=CG0trtsAAAAJ&hl=enhttps://www.researchgate.net/profile/Popescu_Theodorhttp://www.researcherid.com/rid/A-6191-2010

Brevete

A. Sotir, Th. D. Popescu, Th. Balan, C. Bota, T. Mosoiu , D. Scheianu, Brevet No. 111510/09/30/1996, Tehnicide analiza a comportarii microcalculatoarelor la actiunea perturbatiilor electromagnetice puternice ,Ministerul Apararii Nationale, 1996.

Carti

1. M. Tertisco, P. Stoica, Th. D. Popescu, Modelarea si Predictia Seriilor de Timp, Editura Academiei,Bucuresti, 1985, 298 pag.

2. M. Tertisco, P. Stoica, Th. D. Popescu, Identificarea Asistata de Calculator a Sistemelor, EdituraTehnica, Bucuresti, 1987, 388 pag.

3. S. Calin, Th. D. Popescu, V. Sima, B. Jora, Conducerea Adaptiva si Flexibila a ProceselorIndustriale, Editura Tehnica, 1988, 628 pag.

4. Th. D. Popescu, S. Demetriu, Practica Modelarii si Predictiei Seriilor de Timp, Editura Tehnica,Bucuresti, 1991, 388 pag.

5. Th. D. Popescu, Serii de Timp. Aplicatii in Analiza Sistemelor, Editura Tehnica, Bucuresti, 2000, 567pag.

Capitole de Carte

Th. D. Popescu, Independent Component Analysis with Application to Dams Displacements Monitoring, inVoicu, M. (Ed.), Advances in Automatic Control, pp. 271-282, 204, Kluwer Academic Publishers, ISBN: 1-4020-7607-X.

Articole publicate in reviste ISI

1. Th. Popescu, S. Demetriu, Analysis and Simulation of Strong Earthquake Ground Motions UsingARMA Models, Automatica IFAC , Vol. 17, No. 4, pp. 721-737, 1990, ISSN: 0005-1098 (impact factor =3.635), WOS:A1990DU65100006, Q1.

2. Th. D. Popescu, Experiences with a Computer Aided Procedure for Time Series Analysis andForecasting Using Box-Jenkins Philosophy, Annual Review in Automatic Programming (continua caAnnual Reviews in Control), Vol. 12, Part 1, 1995, pp. 361-364, ISSN: 1367-5788 (impact factor =2.042). Q2

3. Th. Popescu, Change Detection in Systems. Time and Frequency Approaches, Neural NetworkWorld, 2000, Vol. 10, Nr. 1-2, 81 - 88, ISSN 121-0552, Institute of Computer Science, Academy ofSciences of the Czech Republic ((impact factor = 0.562). Q4

http://www.researcherid.com/rid/A-6191-2010

https://www.researchgate.net/profile/Popescu_Theodor

https://scholar.google.com/citations?user=CG0trtsAAAAJ&hl=en

http://www.ici.ro/ici/homepage/thpopescu.htm

mailto:[email protected]

mailto:[email protected]

4. Th. Popescu, Change Detection in Nonstationary Time Series in Linear Regression Framework,Neural Network World, 2003, Vol. 13, Nr. 2, 133 - 150, ISSN 1210-0552, Institute of Computer Science,Academy of Sciences of the Czech Republic (impact factor =0.562). Q4

5. Th. D. Popescu, New Change Detection Procedure with Application in Structures MonitoringSubject to Seismic Motions , International Journal of Innovative Computing, Information and Control,Vol. 5, No. 5, 2009, pp. 1285-1294, ISSN 1349-4198 (impact factor =1.667). Q1

6. Th. D. Popescu, Machine Vibration Monitoring by Blind Source Separation and Change Detection,Neural Network World , Vol. 19, No. 3, 2009, pp. 263-277, ISSN 1210-0552 (impact factor =0.62),WOS:000267731300002, (impact factor =0.562). Q4.

7. Th. D. Popescu, Blind Separation of Vibration Signals and Source Change Detection - Applicationto Machine Monitoring , Applied Mathematical Modelling , Elsevier, Vol. 34, No. 11, 2010, pp. 3408-3421, ISSN 0307-904X (impact factor=1.430), WOS:000278842000019. Q1

8. Th. D. Popescu, Analysis of Traffic-Induced Vibrations by Blind Source Separation WithApplication in Building Monitoring, Mathematics and Computers in Simulation , North-Holland, Vol.80, 2010, No. 12, pp. 2392-2403, ISSN 0378-4754 (impact factor = 0.930), WOS:000281497400011,Q2.

9. Th. D. Popescu, A New Approach for Dam Monitoring and Surveillance Using Blind SourceSeparation , International Journal of Innovative Computing, Information and Control , Vol. 7, No. 7,2011, pp. 3811-3824, ISSN 1349-4198 (impact factor =1.667), WOS:000292626800018, Q1.

10. Th. D. Popescu, Detection and Diagnosis of Model Parameter and Noise Variance Changes withApplication in Seismic Signal Processing , Mechanical Systems and Signal Processing , Elsevier,Vol. 25, No. 5, 2011, pp. 1598-1616, ISSN 0888-3270, (impact factor =2.771), WOS:000290550700011,Q1.

11. Th. D. Popescu, Signal Segmentation Using Changing Regression Models with Application inSeismic Engineering, Digital Signal Processing, Elsevier, Vol. 24, No. 1, 2014, pp. 14-26, ISSN: 1051-2004, (impact factor =1.444), WOS:000328595600002, Q2.

12. Th.D. Popescu, New Procedure for Change Detection Operating on Renyi Entropy withApplication in Seismic Signals Processing, Circuits, Systems, and Signal Processing , Springer,ISSN: 0278-081X, , doi:10.1007/s00034-017-0492-y (impact factor=1.178), urmeaza a fi inclusa intr-unnumar la revistei din 2017, Q3.

Recenzii publicate in reviste ISI

1. Th. D. Popescu, Modeling of Dynamic Systems, by L. Ljung, T. Glad, Prentice Hall Information andSystem Sciences Series, PTR Prentice Hall, Englewood Cliffs, New Jersey, Control EngineeringPractice, Pergamon Press, Vol. 3, No. 6, 1995, pp. 897-898, ISSN 0967-0661 (impact factor = 1.83), Q2.

2. Th. D. Popescu, Recenzie comparative a urmatoarelor carti: Solving Control Engineering Problemswith MATLAB , by Katsuhiko Ogata, Edition No: 1, MATLAB Curriculum Series, Prentice Hall Inc.,Englewood Cliffs, New Jersey, 1994, Designing Linear Control Systems with MATLAB by KatsuhikoOgata, Edition No: 1, MATLAB Curriculum Series, Prentice Hall Inc., New Jersey, 1994, MATLAB Toolsfor Control System Analysis and Design by Duane C. Hanselman, Benjamin C. Kuo, Edition No: 2,MATLAB Curriculum Series, Prentice Hall Inc., Englewood Cliffs, New Jersey, 1995, Using MATLAB toAnalyze and Design Control Systems, by Naomi Enrich Leonard, William S. Levine, Edition No: 2,Electrical/Computer Engineering /Control Systems Series, The Benjamin/Cummings PublishingCompany Inc., Redwood City, California, 1995, MATLAB Toolboxes and Applications for Control, byA.J. Chipperfield, P.J. Fleming (Eds.), Edition No: 1, IEE Control Engineering Series 48, PeterPeregrinus Ltd. on behalf of The Institution of Electrical Engineers, Exeter, 1993, Control EngineeringPractice, Pergamon Press, Vol. 4, No. 2, 1996, pp. 279-282, ISSN 0967-0661 (impact factor = 1.83), Q2.

3. Th. D. Popescu, Digital Processing of Random Signals. Theory and Methods, by B. Porat, PrenticeHall Information and System Sciences Series, P.T.R. Prentice Hall, Englewood Cliffs, New Jersey, 1994,

http://www.ici.ro/ici/homepage/YMSSP2728.pdf

http://www.ici.ro/ici/homepage/YMSSP2728.pdf

http://www.ici.ro/ici/homepage/IJICIC-10-02033.pdf


http://www.ici.ro/ici/homepage/MATCOM_3444.pdf

http://www.ici.ro/ici/homepage/MATCOM_3444.pdf

http://www.ici.ro/ici/homepage/AMM_7705.pdf

http://www.ici.ro/ici/homepage/AMM_7705.pdf



Control Engineering Practice, Pergamon Press, Vol. 4, No. 6, 1996, pp. 890-892, ISSN 0967-0661(impact factor = 1.83), Q2..

4. Th. D. Popescu, Introduction to Statistical Signal Processing with Applications, by M.D. Srinath,P.K. Rajasekaran, R. Viswanathan, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1996, ControlEngineering Practice , Pergamon Press, Vol. 4, No. 10, 1996, pp. 1482-1484, ISSN 0967-0661 (impactfactor = 1.83), Q2.

5. Th. D. Popescu, Introduction to Signal Processing, by S.J. Orfanidis, Prentice Hall Signal ProcessingSeries, Prentice Hall, Upper Saddle River, New Jersey, 1996, Control Engineering Practice, PergamonPress, Vol. 4, No. 12, 1996, pp. 1771-1772, ISSN 0967-0661 (impact factor = 1.83), Q2.

6. Th. D. Popescu, Time-Frequency Analysis, by L. Cohen, Prentice Hall Signal Processing Series,Prentice Hall, Englewood Cliffs, New Jersey, 1995, Control Engineering Practice, Pergamon Press, Vol.5, No. 2, 1997, pp. 292-294, ISSN 0967-0661 (impact factor = 1.83), Q2.

7. Th. D. Popescu, Random Signal Processing, by Dwight F. Mix, Prentice Hall; Englewood Cliffs, NJ,USA; 1995, Control Engineering Practice, Pergamon Press, Vol. 5, No. 5, 1997, pp. 734-736, ISSN0967-0661 (impact factor = 1.83), Q2.

Articole publicate in reviste referite in BDI

1. Th. D. Popescu, On the Computation of Direct Spectral Estimates Using Fast Fourier Transform ,Bulletin of Galati University, Electronics, Automation, Informatics Series , Fascicle III, Year IV, 1981, pp.17-26.

2. Th. D. Popescu, Identification of ARMA Parameters of Time Series by Cannonical CorrelationAnalysis, Rev. Roum. Sci. Techn. Electrotech. et Energ ., Vol.27, Editura Academiei, Bucuresti, 1982,pp. 153-161.

3. Th. D. Popescu, Experiments with a Software Package for Time Series Analysis andForecasting, Advances in Modelling & Simulation, AMSE Press, Vol. 3, No. 2, 1985, pp. 1-14.

4. Th. D. Popescu, TIMSPACK - Software Package for Time Series Analysis , Advances in Modelling& Analysis, AMSE Press, Vol. 15, No. 4, 1993, pp. 1-10.

5. Th.D. Popescu, S. Demetriu, Change Detection in Modal Characteristics of Structural Systems,Journal of Mathematical Modelling and Simulation in System Analysis, Vol. 14, 1994, pp. 25-38.

6. Th.D. Popescu, S. Demetriu, Dynamic Characteristics Identification of a Structural System fromEarthquake Records, Journal of Mathematical Modelling and Simulation in System Analysis , Vol. 23,1996, pp. 223-236.

7. Th. Popescu, Detection of Abrupt Changes in Dynamical Systems, Romanian Journal of InformationScience and Technology, Publishing House of the Romanian Academy, 1999, Vol. 2, pp. 273-288, ISSN:1453-8245.

8. D. Ispas, C. Scumpu, D. Hulea & Th. D. Popescu, Dams and Their Foundations Monitoring byStatistical Methods, Hidrotehnica, Special Issue edited by The Romanian Committee on Large Dams,2000, Vol. 45, pp. 37-44, Paper presented to 20th International Congress on Large Dams, September 19-22, 2000, Beijing, PR China.

9. Th. D. Popescu, New Method for Time Series Forecasting, WSEAS Transactions on Circuits andSystems, Special Issue: Optimization, Simulation, Modeling and Control in Systems Science Vol. 2, No. 3,2003, pp. 582-587, ISSN 1109-2734.

10. Th. D. Popescu, Time-frequency Analysis with Application in Earthquake Engineering, ICIC ExpressLetters, An International Journal of Research and Surveys , Vol. 4, No. 1, 2010, pp. 37-44, ISSN 1881-803X.

11. Th. D. Popescu, Detection and Diagnosis of Model Parameter and Variance Changes Using SlidingWindows Approach, Recent Patents on Signal Processing , Bentham Science Publishers Ltd, Vol. 1,No. 1, 2011, pp. 80-87, ISSN 2210-6863.

12. Th. D. Popescu, & M. Manolescu, Blind Separation of Vibration Components in Machine Monitoring,Int. J. Vehicle Noise and Vibration , Inderscience Publishers, Vol. 8, No. 1, 2012, pp. 14-26, ISSN 1479-1471.

13. Th. D. Popescu, D. D. Cioboata, Performance Evaluation of Some Change Detection and DataSegmentation Algorithms, International Journal of Mathematical and Computational Methods, IARASPublications, Vol. 1, No. 1, 2016, pp. 236-241, ISSN 2367-895X.

Lucrari publicate in Proceedings-uri ale unor conferinte internationale

1. A. Davidoviciu, Th. D. Popescu, V. Sima, A. Varga, C. Vasiliu, SIPAC - A Suite of ComputerPrograms for Process Identification and Control System Design, Preprints of IFAC Workshop onComputer Application in Discrete Manufacturing, Prague, September 19-23, l977, pp. 1-14.

2. P. Stoica, Th. D. Popescu, A. Stoica, A Computer Program Package for System Identification,Preprints MECO'78, Measurement and Contro, Athens, June, l978.

3. Th. D. Popescu, Estimation of Autoregressive Moving Average Parameters of Time Series withApplication to EEG Analysis, Proc. of International Symp. on Control Systems and ComputerScience, Bucharest, June 14-16, 1979, pp. 508-515.

4. Th. D. Popescu, D. Pestroiu, P. Stoica, Some Programs for the Processing of EEG Data on aSmall General Purpose Digital Computer, Proc. of the 2nd IFAC/IFIP Symp. on Software forComputer Control, SOCOCO'79, Prague, June, l979, Pergamon Press, S-VIII-1 - S-VIII-4.

5. A. Varga, V. Sima, Th. D. Popescu, C. Vasiliu, Process Control Algorithms for Microprocessors,Proc. of the 2nd IFAC/IFIP Symp. on Software for Computer Control, SOCOCO'79 , Prague, June, l979,Pergamon Press.

6. Th. D. Popescu, V. Sima, A. Varga, C. Vasiliu, Program Package for Process Identification andControl System Design, Proc. of IFAC Symp. on Computer Aided Design of Control Systems ,Zurich, August, l979, M. A. Cuenod (Ed.), Pergamon Press, Oxford, pp. 611-618.

7. Th. D. Popescu, Experiments with a Self-Tuning Controller, Proc. of 4th International Conferenceon Control Systems and Computer Science, Bucharest, June, 1981.

8. Th. D. Popescu, C. Vasiliu, A Time Series Analysis and Process Identification Program Package ,Preprints of AMSE'8l Conference , Lyon, September, l98l, pp. 250-254.

9. Th. D. Popescu, Some Consideration on the Implementation of Self-Tuning Predictors, Preprintsof IASTED Davos International Symposia Modelling, Identification and Control. Robotics , Davos,March, l982.

10. Th. D. Popescu, Self-Tuning Regulators. Comparative Study and Implementation Aspects,Preprints, Measurement and Control, MECO'82, Tunis, September, 1982, 46-1 - 46-6.

11. V. Sima, Th. D. Popescu, ADCON - Adaptive Control Package, Preprints of 3rd IFAC/IFIP Symp.on Software for Computer Control SOCOCO'82, Madrid, October, l982.

12. Th. D. Popescu, On the Application of the Self-Tuning Control Laws, Proc. of 27th Intern. Wiss.Koll. , TH Ilmenau, October, l982, pp. 139-142.

13. Th. D. Popescu, On the Simulation of Self-Tuning Control Laws, Preprints of Simulation'83 Symp. ,Prague, June, 1983.

14. Th. D. Popescu, V. Sima, Experiments with an Adaptive Control Package, Preprints of ACI'83Symp. Applied Control and Identification, Copenhagen, June 28-July 1, 1983.

15. Th. D. Popescu, Experiences with Time Series Modelling and Forecasting for an EnvironmentalSystem, Preprints of Symp. Energy and Environmental Systems, EES'83, August 29-September 2,Athens, 1983.

16. N. Manolescu, T. Ionescu, Th. D. Popescu, Evaluation of Bo-Bo Electric Locomotive DynamicsUsing Time Series Analysis, Proc. Of 4th IFToMM International Symp. on Linkages and ComputerAided Design Methods (Theory and Practice of Mechanisms), Bucharest, July 4-9, 1985.

17. Th. D. Popescu, AUTOB&J - A Computer Aided Procedure for Time Series Analysis andForecasting, Proc. of the 3rd IFAC/IFIP Symp. on Computer Aided Design in Control andEngineering Systems, July 31-2 August, Lyngby, 1985.

18. Th. D. Popescu, Experiences with a Computer Aided Procedure for Time Series Analysis andForecasting Using Box-Jenkins Philosophy, Proc. of the 2nd IMACS/IFAC/WGMA Symp. onSystem Analysis and Simulation, Berlin, August 26-31, 1985, Mathematical Research Series, Band 27,Academie Verlag, Berlin, pp. 361-364.

19. D. Donciulescu, F. Filip, M. Guran, Th. D. Popescu, Decision Support Systems in Water ResourcesDispatching, Proc. of IFAC/IFORS Conference on Control Science and Technology for Development,CSTD'85, Beijing, August 20-22, Academia Sinica Press.

20. Th. D. Popescu, T. Ionescu, Quantative Evaluation of Railway Vehicle Behaviour Using TimeSeries Analysis Techniques, Proc. of the 7th IFAC/IFORS Symp. on Identification and SystemParameter Estimation, July 3-7 1985, York, Pergamon Press, pp. 1067-1072.

21. N. Manolescu, T. Ionescu, Th. D. Popescu , Insight into the Functional Dynamics of 4-AxleElectric Locomotive, Proc. of Conference on Mechanisms and Machinery, September 17-18,Cranfield, England, l985.

22. D. Donciulescu, F. Filip, Th. D. Popescu, Computer Aided Decision Making in Water Retentionand Allocation, Proc. of 4th IFAC Symp. on Large Scale Systems . Theory and Applications, Zurich,August 26-29, l985, Pergamon Press, pp. 861-866.

23. Th. D. Popescu, S. Demetriu, Evolutionary Spectra of Seismograms by Parametric Modelling, Proc. of19th JAACE Symp. on Stochastic System Theory and Its Applications, October 1987, KyushuUniversity, Hakozaki, Fukuoka.

24. Th. D. Popescu, IDPACK - Interactive Software for Identification and System ParameterEstimation, Preprints of 4th IFAC Symp. On Computer Aided Design in Control Systems, Beijing,August 23-25, l988, Academia Sinica Press.

25. Th. D. Popescu, S. Demetriu, Analysis and Simulation of Strong Earthquake Ground MotionsUsing Parametric Models, Preprints of 8th IFAC/IFORS Symp. on Identification and SystemParameter Estimation, Beijing, August 27-31 1988, Academia Sinica Press, pp. 1329-1334.

26. Th. D. Popescu, S. Demetriu, V. Marinescu, Modelling and Forecasting of River Flows UsingStochastic Models, Proc. of 3rd IMACS/IFAC/WGMA Symp. on System Analysis and Simulation,Berlin, August l988, Mathematical Research Series, Band 47, Academie Verlag, Berlin, pp. 65-68.

27. Th. D. Popescu, S. Demetriu, Detecting Changes in Statistical Models, Proc. of Latvian SignalProcessing International Conference, LSPIC - 90, Riga, April 24-26, l990.

28. Th. D. Popescu, S. Demetriu, Detecting Changes in Statistical Models with Application toSeismic Signal Processing, Preprints of 11th IFAC Congress , August 13-17, 1990, Tallinn, Vol. 3, pp.86-91.

29. Th. D. Popescu, S. Demetriu, Change Detection and Diagnosis with Application to StructuralSystems, Preprints of 9th IFAC/IFORS Symp. on Identification and System Parameter Estimation,July 8-12, 1991, Budapest.

30. Th. D. Popescu, IDPACK/PC - A User Oriented Computer Program Package for Identificationand System Parameter Estimation, Preprints of 9th IFAC/IFORS Symp. on Identification andSystem Parameter Estimation, July 8-12, 1991, Budapest.

31. Th. D. Popescu, Modelling of Stochastic Dynamic Systems Using TS-System Program Package ,Preprints of 5th IFAC/IMACS Symp. on Computer Aided Design in Control Systems, CADCS'91, July15-17, 1991, Swansea, Pergamon Press, pp. 289-294.

32. Th. D. Popescu, Change Detection in Dynamic Properties of Structural Systems Using ARModels, Proc. of 24th ISCIE Symp. on Stochastic System Theory and Its Applications, Kyoto,November, 1992.

33. Th. D. Popescu, Identification of a Vibrating Structure Subject to a Natural Excitation, Proc. ofSecond European Control Conference, ECC 93, June 28 - July 1, 1993, Groningen, Vol. 2, pp. 627-632.

34. Th. D. Popescu, Sequential Detection of Changes in Seismic Signals, Preprints of 25th ISCIESymp. on Stochastic System Theory and Its Applications, Osaka, November 10 - 12, 1993.

35. Th. D. Popescu, Fault Detection of Dynamical Systems with Nonstationary Inputs , Preprints ofIFAC Symposium on Fault Detection, Supervision and Safety for Technological ProcessesSAFEPROCESS 94, June 13-15, 1994, Espoo, Finland, Vol. 1, pp. 329-334.

36. Th. D. Popescu, Sequential Detection of Changes in Digital Signals with Application to SeismicSignal Processing, Preprints of IMACS International Symposium on Signal Processing, Roboticsand Neural Networks, in cooperation with IEEE/SMC Society, Lille, April 25-27, 1994.

37. Th. D. Popescu, S. Demetriu, Identification of a Multi-Story Structure from Earthquake Records,Preprints of IFAC 10th Symposium on System Identification, SYSID'94 , Eds. M. Blanke and T.Soderstrom, July, 1994, Copenhagen, Vol. 2, pp. 411-416.

38. Th. D. Popescu, S.Demetriu, Change Detection in Dynamic Characteristics of a Structural System,Proc. of American Control Conference, Baltimore, Maryland, June 29-July 1, 1994, Vol.1, pp. 937-941,WOS:A1994BB17U00200.

39. Th. D. Popescu, S. Demetriu, Dynamic Characteristics Identification of a Structural System fromEarthquake Records, Proc. of Asian Control Conference, ASCC, Tokyo, July 27-30, 1994.

40. Th. D. Popescu, Detection of Changes in Non-stationary Time Series with Application toSeismic Signal Processing, Preprints of International Workshop on Parallel Applications inStatistics and Economics "Non-linear Data Analysis", Trier-Mainz, Germany, August 29 - September2, 1995.

41. Th. D. Popescu, Detection of Changes in Modal Characteristics of a Vibrating Structure ,Proc. of 3rd European Control Conference, Rome, September 5-8, pp. 1131-1136, 1995.

42. Th. D. Popescu, Change Detection in Systems with Nonstationary Inputs, Proc. of ISIAC'96, FirstInternational Symposium on Intelligent Automation and Control, Second World Automation Congress,WAC'96, Montpellier, May 27-30, 1996.

43. Th. D. Popescu, Robust Detection of Changes with Application to Structural Systems, Proc. ofIEEE Symposium on Computer-Aided Control System Design (CACSD'96), Dearborn, Michigan,September 15-17, 1996, pp. 123-128, WOS:A1996BG49L00022.

44. Al. Manescu, N. Burcea, V. Marinescu, F. Ionescu, Th. D. Popescu, Linking on EnvironmentalDatabase with GIS and TS Models, Proc. of the 2nd International Conference on Hydroinformatics,Hydroinformatics'96, Zurich, Switzerland, September 9-13, 1996, Mueller (ed.), Balkema, Rotterdam,pp. 165-166.

45. Th. D. Popescu, Performance Evaluation of Some Methods for On-line Change Detection in DigitalSignals, Proc. of the 2nd World Congress on Intelligent Control and Intelligent Automation , Xian,Shaanxi, China, June 23-27, 1997, pp. 1965-1970.

46. Th. D. Popescu, Change Detection in Systems, Proc. of the 2nd Asian Control Conference, ASCC'97,Seoul, July 22-25, 1997, II-743 - II-746.

47. Th. D. Popescu, CHANGE-Software Support for Change Detection in Signals and Systems,Preprints of the 11th IFAC Symposium on System Identification, SYSID'97 , July 8-11, 1997, Kitakyushu,Fukuoka, Vol. 3, pp. 1619-1625.

48. Th. D. Popescu, Change Detection in Vibration Structures Subject to Transient Natural Excitation,Invited Paper, Proc. of IEEE International Conference on Control Applications, Sheraton Hartford Hotel,Hartford, Connecticut, USA, October 5-7, 1997, pp. 743-748, WOS:A1997BJ81D00137.

49. Th. D. Popescu, S. Demetriu, Robust Change Detection in Dynamic Systems with ModelUncertainties, Preprints of 4th IFAC Conference on System Structure and Control, SSC'97, 23-25October, Bucharest, 1997, pp. 290-295, WOS:000079976400040.

50. Th. D. Popescu, Detection of Abrupt Changes in Time Series, Proc. of the 6th InternationalWorkshop on Parallel Applications in Statistics and Economics, PASE'97, November 9-12, 1997,Marianske Lazne, Computers in Finance and Economics, Abstracts and Selected Papers, pp. 139-148.

51. Th. D. Popescu, Detection and Isolation of Abrupt Changes in a Vibration Monitoring Application,Proc. of 2nd International Symposium on Intelligent Automation and Control (ISIAC'98), WorldAutomation Congress (WAC'98), Anchorage, Alaska, May 9-14, 1998, ISIAC 077.1, CD-ROM TSI Press,Albuquerque, NM, USA.

52. Th. D. Popescu, Change Detection in Vibration Structures in the Presence of Large Variations inExcitations, Proc. of International Conference on Scientific Computing and Mathematical Modelling,IMACS'98, Alicante, Spain, June 25-27, 1998.

53. Th. D. Popescu, A Frequency Domain Approach for Change Detection in Structural Systems,Proc. of CONTROLO'98, 3rd Portuguese Conference on Automatic Control, Coimbra, Portugal,September 9-11, 1998, pp. 525-530.

54. Th. D. Popescu, Some Experiences with Detection of Abrupt Changes in Structural Systems,Preprints of International Conference on Systems, Signals, Control, Computers, SSCC'98 , Durban,South Africa, September 22-24, 1998, Vol. II, pp. 407-411.

55. Th. D. Popescu, Detection of Abrupt Changes in Modal Characteristics of a Vibrating Structure - ACase Study, Proc. of the 1999 IEEE International Conference on Control Applications, Kohala Coast-Island of Hawaii, Hawaii, USA, August 22-27, 1999, pp. 1442-1447.

56. Th. D. Popescu, Change Detection in Signals Using Linear Regression Models, Proc. of the 1999IEEE International Symposium on Computer Aided Control System Design, Kohala Coast- Island ofHawaii, Hawaii, USA, August 22-27, 1999, pp. 182-187.

57. Th. D. Popescu, Signal Segmentation Using Linear Regression Models, Proc. of 3rd InternationalSymposium on Intelligent Automation and Control (ISIAC'2000), World Automation Congress(WAC'2000), Maui, Hawaii, SUA, June 11-16, 2000, CD ROM TSI Press, Albuquerque, NM, USA.

58. Th. D. Popescu, Change Detection in Modal Characteristics of a Mechanical Structure, Proc. ofthe 3rd Asian Control Conference, Shanghai, PR China, July 4-7, 2000, pp. 2451-2456.

59. Th. D. Popescu, Change Detection in Signals Using Cepstral Distance, Proc. of 16th IMACS WorldCongress IMACS'2000 on Scientific Computation, Applied Mathematics and Simulation , Lausanne,Switzerland, August 21-25, 2000 CD ROM.

60. Th. D. Popescu, Performance Evaluation of Some Change Detection Methods by Monte-CarloSimulation, Book Abstract of The 4th International Conference on Monte Carlo and Quasi-Monte CarloMethods in Scientific Computing, Hong Kong, November 27 - December 1, 2000.

61. Th. D. Popescu, Change Detection with Application in Vibration Monitoring, Proc. of The 6thInternational Conference Control, Automation, Robotics and Vision, ICARCV'2000, Singapore, 5-8December, 2000, CD-ROM, WOS:000176705800012.

62. Th. D. Popescu, New Method for Change Detection in Systems Operating in NonstationaryEnvironment, Proc. of The Fourth ICSC International Conference on Soft Computing and IntelligentSystems for Industry , University of Paisley, Scotland, UK, 26-29 June, 2001, CD-ROM.

63. Th. D. Popescu, Blind Source Separation with Application to Dams Displacements Monitoring,Proc. of the 3rd International Symposium Engineering of Intelligent Systems , University of Malaga,Spain, 24-27 September, 2002.

64. Th. D. Popescu, Dams Displacements Monitoring Using Second Order Blind IdentificationAlgorithm, Proc. of IEEE International Symposium on Intelligent Control (ISIC) , pp. 345-349,Vancouver, British Columbia, Canada, 27-30 October, 2002, WOS:000179732300058.

65. Th. D. Popescu, Multivariate Time Series Forecasting Using Independent Component Analysis,Proc. of IEEE Conference on Emerging Technologies and Factory Automation (ETFA'2003) , Lisbon,Portugal, September 16-19, 2003, vol. 2, pp. 782-789, ISBN 0-7803-7937-3, IEEE Catalog Number03TH8696, WOS:000189414100117.

66. Th. D. Popescu, Robust Change Detection Method Using Akaike Information Criterion for SignalSegmentation, Soft Methodology and Random Information Systems , Series Advances in SoftComputing, Eds. Miguel Lopez-Diaz, Maria A. Gil, Prezemyslaw Grzegorzewski, Olgierd Hyrniewicz,Jonathan Lawry, Springer Verlag Berlin Heiderberg New York, ISBN 3-540-22264-2, pp. 749-756, 2004,WOS:000224212800093.

67. Th. D. Popescu, Some Experiences with Change Detection in Dynamical Systems , Knowledge-Based Intelligent Information and Engineering Systems: 8th International Conference, KES 2004 ,Wellington, New Zealand, September 20-25, 2004, Proceedings, Part I , Lecture Notes in ComputerScience, Eds: Mircea Gh. Negoita, Robert J. Howlett, Lakhmi, C. Jain, Springer-Verlag Heidelberg,ISBN: 3-540-23318-0, pp. 1220-1227, WOS:000224585300165.

68. Th. D. Popescu, Change Detection in Spectral Characteristics of Signals in a Linear RegressionFramework, Proc. of 3-rd International Conference on Advanced Computational Methods inEngineering, Acomen 2005 , Eds. E. Dick et al, Ghent, Belgium, 30 May - 2 June, 2005, CD-ROM.

69. Th. D. Popescu, Performance Evaluation of Some Change Detection and Data SegmentationMethods, Book of Abstracts, The 3-rd IASC World Conference on Computational Statistics & DataAnalysis , Limassol, Cyprus, 28-31 October, 2005.

70. Th. D. Popescu, A New Statistical Approach for Robust Change Detection in Dynamical Systems,Book of Abstracts, The 26-th Conference on Applied Statistics CASI 2006 , Killarney, Co. Kerry, Ireland,17-19 May 2006.

71. Th. D. Popescu, New Approach for Machine Vibration Analysis and Health Monitoring, Proc. IEEEInternational Symposium on Industrial Electronics ISIE'06 , ETS-Downtown Montreal, Quebec, Canada,9-13 July 2006, CD-ROM, WOS:000244382905060.

72. Th. D. Popescu & M. Manolescu, Blind Source Separation of Traffic-Induced Vibrations in BuildingMonitoring, Proc. of the 6-th IEEE International Conference on Control and Automation , May 30-June1, 2007, Guangzhou, China, CD-ROM, IEEE Catalog Number: 07EX1625C, ISBN: 1-424-0818-0,Library of Congress: 2006937560, pp. 2993-2998, WOS:000257195300070.

73. Th. D. Popescu, Time Frequency Analysis in Structures Monitoring Subject to Extreme DynamicLoads, Proc. of the 9-th WSEAS International Conference on Mathematical Methods andComputational Techniques in Electrical Engineering , October 13-15, 2007, Arcachon, France, Electricaland Computer Engineering Series, A Series of Reference Books and Textbooks, ISSN: 1790-5117,ISBN: 978-960-6766-08-4, ISI Books, WOS:000254019000011.

74. Th. D. Popescu, Robust Change Detection Procedure with Application in Structures Subject toExtreme Dynamic Loads, Proc. of the 14-th IEEE Mediterranean Electrotechnical ConferenceMELECON'2008 , May 5-7, 2008, Ajaccio, Franta, IEEE Catalog Number: CFP08MEL-CDR,ISBN: 978-1-4244-1633-2, Library of Congress: 2007906049, ISI Books, WOS:000261729400004.

75. Th. D. Popescu, Independent Component Analysis with Application to Behavior Surveillance ofLarge Dams, Proc. of the 12-th WSEAS International Conference on Systems , Heraklion, Creta,Grecia, 22-24 iulie 2008, ISBN: 978-960-6766-83-1, ISSN: 1790-2769, WOS:000260669900008.

76. Calarasu, I. Stoian, O. Dancea, M. Gordan & Th. D. Popescu, R. Campeanu, Integrated System,Decisional Support Based on Multisensorial Information Fusion for Behavior Surveillance andPrediction of Dams and Hydro-power Plants, Proc. of the IEEE International Conference onAutomation, Quality and Testing, Robotics (AQTR 2008) THETA , 16-th Edition, Cluj-Napoca, Romania,22-25 May 2008, IEEE Catalog Number: CFP08AQT-PRT, ISBN: 978-1-4244-2576-1,WOS:000259080200056.

77. Th. D. Popescu, Time Series Forecasting Using Independent Component Analysis, Proc. of theWorld Congress on Science, Engineering and Technology (WCSET 2009) , Dubai, United ArabEmirates, January 28-30, 2009, ISSN 2070-3740.

78. Th. D. Popescu, New Approach for Machine Vibration Analysis and Health Monitoring, Invitedpaper, Kuwait Maintenance Conference , organized by Spatial Co Kuwait, December 13-14, 2009.

79. Th. D. Popescu, Some Experiences with Detection and Diagnosis of Model Parameter andVariance Changes, Mathematical Models for Engineering Science(MMES'10), Proc. Internationalconference of the Institute for Environment, Engineering, Economics and Applied Mathematics(IEEEAM) , Puerto De La Cruz, Tenerife, Spain, November 30- December 2, 2010, Ed. V. Mladenov, K.Psarris, N. Mastorakis, A. Caballero, G. Vachtsevanos, pp. 63-67, ISBN: 978-960-474-252-3, ISSN:1792-6734.

80. Th. D. Popescu, New Approach in Machine Monitoring Using Blind Source Separation , Proc. ofInternational Conference on Computational Science and Its Applications (ICCSA 2011) , Santander,Spain, June 20-23, 2011, IEEE Computer Society's, Conference Publishing Services, Eds. AndresIglesias, Bernady O. Apduhan, Osvaldo Gervasi, David Taniar, Marina Gavrilova, pp. 211-214, ISBN:978-0-7695-4404-5.

81. Th. D. Popescu, Blind Source Separation in Machine Monitoring, Proc. of The 54th IEEEInternational Midwest Symposium on Circuits and Systems (MWSCAS 2011) , Yonsei University, Seoul,Republic of Korea, August 7-10, 2011, IEEE Catalog Number: CFP11MID-USD, ISBN: 978-1-61284-855-6, WOS:000296057200305.

82. Th. D. Popescu, Neural Network Learning for Blind Source Separation With Application in DamSafety Monitoring, Proc. of The 19-th International Conference on Neural Information Processing(ICONIP 2012), Doha, Qatar, November 12-15, 2012, Series Lecture Notes in Computer Science,LNCS 7666, Part IV, Subseries Theoretical Computer Science and General Issues, Springer BerlinHeiderberg, Huang, T.; Zeng, Z.; Li, C.; Leung, C.S.(Eds.), ISBN 978-3-642-34478-7, ISBN 0302-9743,pp. 1-8, 2012, WOS:000345091300001.

83. Th. D. Popescu, D. Aiordachioaie, Signal Segmentation in Time-Frequency Plane Using RenyiEntropy - Application in Seismic Signal Processing, Proc. of The 2-nd IEEE InternationalConference on Control and Fault-Tolerant Systems (SysTol13) , pp. 312-317, Nice, France, October 9-11, 2013, ISBN: 978-1-4799-2854-5, WOS:000331082600050.

84. Th. D. Popescu, Signal Segmentation using Maximum a Posteriori Probability Estimator, Proc. ofThe 7-th International Conference on Application of Information and Communication Technologies(AICT2013), Baku, Azerbaijan, October 23-25, 2013, WOS:000345830600011.

85. Th. D. Popescu, M. Andrei, Multiple Hypothesis Testing with Application in Vibrating SignalsAnalysis, Proc. of THe IEEE International Symposium on System Engineering (ISSE), pp. 71-76, Roma,Italy, September 24-26, 2015, WOS:000380559200012.

86. Th. D. Popescu, B. Dumitrascu, An Application of Renyi Entropy Segmentation in Fault Detectionof Rotating Machinery, Proc. of The 16th IEEE International Conference on Research and Education inMechatronics (REM2015), pp. 288-295, R. Biesenbach and A. Weinert (Eds), Bochum, Germany,November 18-20, 2015, WOS:000380586900045.

87. D. Aiordachioaie, Th. D. Popescu, VIBROMOD An experimental model for Change Detection andDiagnosis Problems, Proc. 17th IMEKO TC 10 Workshop on Technical Diagnostics "New Perspectivesin Measurements, Tools and Techniques for System’s Reliability, Maintainability and Safety, pp. 316-321,Milan, Italy, June 27-28, 2016.

88. Th. D. Popescu, D. Aiordachioaie, VIBROTOOL - Software Tool for Change Detection and Diagnosisin Vibration Signals, Proc. of 59th IEEE International Midwest Symposium on Circuits and Systems(MWSCAS 2016) , pp. 640-643, Abu Dhabi, United Arab Emirates, October 16-19, 2016.

89. B. Dumitrascu, D. Aiordachioaie, Th. D. Popescu, VIBROTOOL - A Matlab Toolbox for ChangeDetection and Diagnosis in Vibration Engineering, Proc. 13th IEEE International Conference onDevelopment and Application Systems (DAS), Suceava, May 19-21, 2016, WOS:000383222200002.

90. Th. D. Popescu, D. Aiordachioaie, Robust Change Detection in Signals Using EnergyConcentration and Regression Models, Proc. of The 13th IEEE International Conference on SignalProcessing (ICSP), pp. 1707-1712, Chengdu, China, November 6-10, 2016.

91. D. Aiordachioae, Th. D. Popescu , A Method to Detect and Filter the Cross Terms in the Wigner-Ville Distribution, The 13-th IEEE International Symposium on Signals, Circuits and Systems. ISSCS2017, Iasi, 13-14 July 13-14 , 2017.

92. Th. D. Popescu, M. Manolescu, Blind Source Separation - A Tool for Multivariate Time SeriesForecasting, The 9th IEEE International Conference on Modelling, Identification and Control (ICMIC2017), July 10-12, 2017, Kunming, China.

Anexa 2

Lista proiecte PNCDI conduse in calitate de coordonator sau responsabil partener ICI: 2000-2017

1. Cercetari privind elaborarea si promovarea de metode si tehnici pentru prelucrarea datelorfurnizate de retelele de senzori in vederea supravegherii si cresterii sigurantei in exploatare aconstructiilor hidrotehnice, Contract RELANSIN R1184/2001, ICI - AMCSIT, Coordonator ICIBucuresti, Parteneri: HIDROELECTRICA, Director proiect.

2. Diagnosticarea sigurantei in exploatare si a starii de degradare seismica pentru constructii civilesi constructii in transporturi, pe baza masuratorilor dinamice la scara naturala , ContractAMTRANS 1BO2-2/15.10.2001, .Coordonator INCERC Bucuresti, Parteneri: UTCB, ICI, INCERTRANS,Responsabil partener ICI.

3. Sistem de masurare si analiza a semnalelor de vibratie cu aplicatie in monitorizarea proceselor siinstalatiilor tehnologice (echipamente electromecanice), Contract RELANSIN 2056/1.10.2004,Coordonator ICI Bucuresti, Parteneri: SC SIMTEX SA, SC PROIECT LAVALD SRL, Director proiect.

4. Sistem de analiza complexa a dinamicii semnalelor EEG, bazata pe analiza componentelorindependente, cu efecte deosebite in cresterea calitatii actului medical, Contract RELANSIN2005/15.09.2004, Coordonator UPB - ACPC, Parteneri: ICI Bucuresti, Spitalul Universitar de UrgentaBucuresti, Responsabil partener ICI.

5. Sistem de analiza a impactului vibratiilor datorate traficului de metrou in raport cu alte surse dintrafic asupra sigurantei structurale a cladirilor adiacente si asupra confortului ocupantiloracestora, Contract AMTRANS 7B24-1, Coordonator: INCERC Bucuresti, Parteneri: ICI Bucuresti,Metroul SA,Responsabil partener ICI.

6. Sistem integrat, suport decizional bazat pe fuziunea informatiilor multisenzoriale pentrusupravegherea si predictia comportarii barajelor si amenajarilor hidrotehnice - FUZIBAR,Contract CEEX nr. 706, 2006, Coordonator: IPA SA, Parteneri: Universitatea Tehnica Cluj-Napoca, ICI,Universitatea "Transilvania" Brasov, Responsabil partener ICI.

7. Analiza avansata timp-frecventa a vibratiilor cu aplicatii in monitorizarea structurilor expuseactiunilor dinamice extreme (ELAN), Contract CEEX nr. 206, 2006, Coordonator ICI Bucuresti,Parteneri: UTCB, INCERC, Director proiect.

8. Analiza factorilor si a dinamicilor macroeconomice bazata pe cunoastere, utilizand tehnicieconometrice si de prelucrare a informatiei (ECOMA), Contract PN II nr. 92-082, 2008, Coordonator:ASE Bucuresti, Parteneri: ICI Bucuresti, INCSMPS, IPE, Responsabil partener ICI.

9. Sistem experimental pentru detectia si diagnoza schimbarilor in procese vibratorii folosindtehnici avansate de masurare si analiza bazate pe model – VIBROCHANGE, Contract PN-II-PT-PCCA-2014 Parteneriate C345/2014, Coordonator: Universitatea „Dunărea de Jos” Galati, Parteneri:ICI Bucuresti, Institutul Naţional de Cercetare-Dezvoltare pentru Mecatronică si Tehnica MăsurăriiBucuresti, S.C. Temnet Engineering S.R.L, Responsabil partener ICI.

10. Sistem mecatronic inovativ pentru controlul inelelor de rulmenti prelucrate pe masini CNC cafactor de optimizare a calitatii suprafetelor prelucrate – BeQuCon , Contract PN-II-PT-PCCA-2014Parteneriate, C347/2014, Coordonator: Institutul National de Cercetare Dezvoltare pentru Mecatronicasi Tehnica Măsurării, Parteneri: Universitatea Politehnica din București – Centrul de Cercetare -Dezvoltare pentru Mecatronică (UPB-CCDM), ICI București, SC COMIS SRL, Responsabil partener ICI.

mailto:1BO@-2/15.10.2001

Documents

Europass Curriculum Vitae - ici.ro · PDF fileDetectie si diagnoza (fault detection) in semnale si sisteme cu aplicatii in analiza semnalelor seismice, detectia schimbarilor in structuri