Upload
others
View
5
Download
1
Embed Size (px)
Citation preview
Technical DataTechnology & Principle Automated continuous flow analyzer micro or
macroflowOperations Multichannel in parallel, up to 12 channels
simultaneouslySampler RA104 or RA200
Dimensions/ Weight & Power 60x45x40 cm (LxWxH); 15 Kg; 12/24 V DC power supply included
Operations Random Access type ρ φ ζNumber of positions 104 or 200
Multiprobe operations Yes up to 4 probesAutodilution module Yes, optional
Analytical moduleDimensions & weight 60x22x46 (LxWxH), 15Kg
Power 12 & 24 VDC, power supply included as standardOperations Fully PC controlled, local control by integrated colour
touch screenEach analytical module includes:Peristaltic pump n. 1 high precision peristaltic pump PC controlled,
long pump tube lifePump tubes positions 12
Multispeed Yes, 2 speeds, Fast for start/stop & reagentchangeover, Standard for analysis
Digital ColorimeterWavelenght range 340-1100nm
Light source LED emitters coupled with specific interferential filterFlow cell - standard 15 or 50mm, ID 1.0mm
Flow cell - special design (options) Guided Wave Flow Cell path length on demand Fluorimetric flow cell
Colorimeter adjust, baseline and gain Fully controlled by PCDebbubbling Hydraulic or electronic
Matrix correction Yes, optionalLinearity & OD resolution Standard: 1x10-4 , max linearity: 3.5 AU ;
Extended: 2.5x10-7 , max linearity: 6.0AU, 24 bitA/D converter (optional)
Heating baths
Heating or distillation bath n. 2 heating baths, fully PC controlledUV digestor
Coils & Lamps Quartz coil, high energy UV lamp for TN, TP anddedicated lamp for TCn
Wash Reagent valvesNumber of valves & control Max n. 6 Wash/Reagent valves, fully PC controlled
Software
3 level password: operator, supervisor, managerUp to 12 channel
Up to 9 standards for each channelsCalibration curve stored for each run
Real time peaks and resultsOn Line Quality control (up to 5 levels)
Work list, peaks and results stored with each runAuto wake up & Auto shutdown included as standardExternal & alternative detectors (Flame, Fuorimeter)
Subject to change without noticeSYSTEA SpA
Administration and Production: Via Paduni, 2/A - 03012 ANAGNI (FR)Tel. (+39) 0775.776058 - Fax 0775.772204
e mail: [email protected] Web site: http://www.systea.it
Document ID: FlowSys_07_E.doc
FLOWSYS III
CONTINUOUS FLOW ANALYZERFOR AUTOMATED CHEMISTRIES
SYSLYZER 3000 - CFA softwareSyslyzer 3000 software has been developed onCFA users suggestions, collected through manyyears of application engineers activities.Systea in house software departmentprogrammed a 32 bit software for MS WindowsXP /7/8.
EASY TO USEAll the functions and symbols are familiar to allthe laboratory operators.Set up a run is easy and quick: all work listsprepared for run can be changed at any time.Stored methods settings can define up to 9standards and up to 5 controls. Calibration canbe linear, polynomial, etc.. Corrections can beselected to re-calculate results compensatingbaseline or gain drift.
QUICK START WORK LIST URGENT SAMPLES
Start a run is simple andfriendly the operator canuse a master work list andsimply insert the samplesto be analyzed. Afterstarting analysis, the flowchart displays thecolorimeter graphic andthe calibration function ifalready processed.
A complete work list includingsample ID can be generatedeasily. In the worklist theoperator defines the order of thebatch to be analysed. Standardworklists can be stored and usedrepeatedly when needed.
Urgent samples can be addedduring a run. Just click on AddSamples and digit the number ofsamples to add. Results,identified as QC areautomatically stored in QC files,to be available as controls chart.
MAIN FEATURES•3 level password: operator, supervisor,manager•Up to 12 channel•Up to 9 standards for each channels•Automatic calibration•Calibration curve stored for each channel for
each run•Reanalyze function for calibration, and/orsamples• Real time peaks and results •On Line Quality control (5 levels) and QC chart•Peaks and results stored for each run•Autowake up and autoshutdown
FLOWSYS IIICONTINUOUS FLOW ANALYZER
FLOWSYS III is a microflow/macroflowautomated CFA analyzer for water, soil, plantsextracts and other industrial samples.More than 800 applications are available onvarious matrix.
FLOWSYS III is a unique CFA analyzercombining higher performances and lowrunning costs with a friendly user interface.The segmented technique offers all the variouspossibilities of flow-analysis, what basically is ahighly integrated, modular sample preparationand handling technique, with outstandingrepeatability.
The 3rd Generation CFA Analyzer
Features/Benefits
The CFA technique carries out all steps of theanalytical procedure in a reaction line of 1.0 or2.0 mm inner diameter. These flow-conditionsresults in several advantages, for analyticprocess, design and easy operation. Thereduction of flow-volume to 40% of theprevious second CFA generation reduces therequired dimensions for the pump. A highprecision, multichannel pump separately foreach determination provides maximumflexibility and easy maintenance.
The physical properties of flow line andsegmentation provides high effective,continuous mixing and faster kinetics reaction.FlowSys III provides easier and saferconditions for today's most interesting CFAapplications, using inline distillation (cyanide,phenolindex) or UV-digestion (total-P, total-N).
Colour touch-screen
Baseline and gain PC controlled
HB temperature PC controlled
Dual-speed pump PC controlled , for quickset-up or shut-down
PC controlled Wash/Reagents valves
Automatic colorimeter adjust on all filters
Random access Automatic Sampler, 104 or200 positions on single sampling probe,up to 4 probes operations option
Auto diluter option
Low reagent consumption & low cost forreagent disposal
Special pump design/new manifoldconnectors
Low maintenance cost
Easier and friendly approach, no problemsfrom bubble pattern, tubes connectionsetc.
Easy & Fast method changeover
Fast shutdown and Start up
Independent analytical module
Pump/s activated only for runningchannel/s
Pump tubes saving
IN LINE SAMPLE PRETREATMENTS
In line distillation forCyanides (total & free),Phenols, Volatile acidity
etc.
In line UV digestor forTotal Phosphorous, TotalNitrogen etc., dedicatedlamp for Total Cyanides
Dialyzers for high level orcoloured samples
FLOW-ONE is a standard FlowSys module thatthanks to the "FlowOne" option available inthe integrated software operates w/o PC. Theoperator is driven trough a simplified menu tothe calibration procedure and the sampleanalysis. Calibrations and results are storedinside the analyzer and can be retrieved troughUSB or Ethernet port as TXT file compatiblewith Excel. FLOW-ONE can be operated w/o sampler, theoperator is prompted for sample replacement orwith a sequential sampler that allow to run upto 30 samples.FLOW-ONE, allows to enter the number ofsample to be analyzed then starts & stops thesampler.
APPLICATIONS LISTSurface,ground, drinking, waste and seawaterALDEHYDES COD PERMANGANATE INDEXALKALINITY CYANIDE FREE & TOTAL PHENOLSALUMINIUM FLUORIDE PHOSPHATEAMMONIA HARDNESS SILICATECALCIUM IRON SULFATECHLORIDES MANGANESE SULFIDECHLORINE NITRATE+NITRITE TOTAL NITROGEN CHROMIUM 6+ NITRITE TOTAL PHOSPHOROUSWine/Beer/Etc. Soils, plants, feeds and fertilizersACETIC ACID AMMONIA TOTAL PHOSPHOROUS*ALFA AMMINIC NITROGEN CALCIUYM NOTEAMMONIA CHLORIDE
Applications list includes almost 800 methods this list shows only the most common methodsFor any method not included in the list please contact our application laboratory to check method availability.Methods list is under continuousdevelopment
BETA-GLUCAN MAGNESIUMANTHOCYANS (WINE) NITRATE+NITRITEANTHOCYANOGEN (BEER) NITRITEPROTEIN/TOTAL N PHOSPHATEREDUCING SUGARS POTASSIUM (FLAME)SO2 FREE SODIUM (FLAME)SO2 TOTAL SILICATESTOTAL POLYPHENOLS SULFATE
Require external sample
pre treatment
TOTAL NITROGEN (TKN)*
METHODS COMPLIANCE:Most of methods are EPA, SM, ISO,
APAT compliant
Flame option Colorimetric & Fluorimetricdetector
Allow to connect an external flame photometerto measure Sodium & potassium is soils. Flame photometers are available in twoversions:
Standard: single channel ready to measurepotassium, sodium or calcium.
Dual channel: to measure sodium & potassiumsimultaneously
Sherwood photometer mod 410
Fluorimetric methods can be used asalternative to the standard colorimetry thanksto the integrated high sensitivity fluorimeter .
Available applications are:
Ammonia, Phosphate, Nitrite & Nitrite +Nitrate in seawater as well as Beta Glucan inbeers.
FLOW-ONE - STAND ALONE ANALYTICAL MODULE