FOCUS 4 2015 DK

Labortops 4/2015

Further details on page 19

Compact

Portable

Economical

LLG‐uniVACUUPUMP 1

Lab consumablesOccupational safetypH‐ and conductivity measurementAnalytical measurementHomogenisersMagnetic stirrers

Cell cultureMicrobiology ‐ FiltrationLLG Labware InstrumentsChromatographyPhotometer

Magnetic stirrers ‐ AccessoriesEvaporating rotatorsFreezers and ULT‐FreezersOpticsLife sciencePumps

2-34-56-7

89

10

2021222324

1112-1314-1516-17

1819

valid until 31st December 2015

Focus 4/2015

Lab consumables

For more articles see our Laboratory Catalogue from page 49, 180, 389, 1166 onwards

The 3D conductivity meter is battery driven to control the conductivity of pureand demineralized water. The scaled value can be controlled with three light-emitting diodes (LED) green, yellow and red.The limited values are available in two performances:<1, <20, >20µS/cm and <5, <20, >20µS/cm, and two applications: straight (illustration 1) and angular (illustration 2).The unit consists of a plastic housing with a R ¾” connection.

- profitabilty: battery-driven - longlasting duration- stand-alone: no electrical connection necessary- safety device: 3D conductivity meter - 3 light emitting diodes (LED)- connectors: R ¾” union nut- measuring range: 0,1 to 20µS/cm- overall dimensions (W x D x H): 55 x 40 x 110mm, straight

75 x 50 x 85 mm, angular

Type Measuringrangelimitvalue

PK Cat. No. Price Now

DKK DKKstraightstraightangularangular

<1/<20/>20<5/<20/>20<1/<20/>20<5/<20/>20

1111

9.700 8029.700 8039.700 8049.700 805

1.170,001.170,001.170,001.170,00

932,00932,00932,00932,00

Choice of vibration, sound and/or light alarms makes this timer perfect forhigh noise locations.- Switchable timing capacity: 19 hours: 59 minutes/99 minutes: 59 seconds- Timer accuracy: ±5 seconds/day- Count direction: up/down; displays elapsed time after countdown- Vibration, light and loud buzzer sound alarms can function at one time, or be

independently turned off- Key press confirmation feature gives an audible indication of data entry- Lay it flat on a bench, use the flip-open stand for a vertical view, carry it on

a lab coat with the convenient pocket clip, or use the magnetic back formetal surface attachment

- Requires two AAA batteries (included)- Individually tested, inspected, and calibrated using NIST- Includes Certificate of Calibration with unique report number, stated

corrections and standard used for the calibration, and multi-languageinstructions (English, French, German, Italian, Portuguese and Spanish)

- RoHS compliant

Dimensions (WxDxH): 45 x 75 x 20mm (without clip portion)

Type PK Cat. No. Price Now

DKK DKKLLG Timer with Triple Alarms, 1-channel 1 6.266 707 415,00 227,00

Fillingvolumeapprox

Thickness Dimensions(D x W)

Features PK Cat. No. Price Now

ml mm mm DKK DKK3060120530710272060120207124053071010602040

0,0570,0570,0570,0640,0760,1020,0570,0570,0760,0760,0640,0760,0760,076

65x12575x12575x185115x230150x230254x38075x12575x18595x180150x380115x230150x230125x380190x380

yesyesyesyesyesyesnononononononono

500500500500500250500500500500500500500500

7.080 2087.058 0057.077 2127.058 1206.242 0836.266 3046.091 0559.404 2347.981 3456.266 3029.404 2356.228 6399.404 2366.305 117

585,00585,00605,00855,00

1.120,001.670,00

555,00575,00695,00

1.495,00805,00

1.045,001.295,001.720,00

379,00379,00389,00547,00726,00

1.075,00358,00368,00452,00957,00516,00673,00820,00

1.095,00

7.080 208

A straightforward and tough folding mechanism that permits safe and easyhandling. The Active Lock is optimized in its function and allows a safe, easyand fast assembling and folding of the box.Dishwasher safe, food safe. Autoclavable at 120°C, enduring temperature stability from -40°C to 90°C.

Colour External dimensions(W x D x H)

Capacity Loadcapacity


mm l kg DKK DKKblackgreyblueblackgreyblueblackgreyblueTrolley, PP, blue

600 x 400 x 156600 x 400 x 156600 x 400 x 156600 x 400 x 180600 x 400 x 180600 x 400 x 180600 x 400 x 220600 x 400 x 220600 x 400 x 220607 x 407 x 170

313131363636444444

-

151515181818222222-

1111111111

9.301 4939.301 4949.301 4959.301 4969.301 4979.301 4989.301 4999.301 5009.301 5019.301 502

105,00105,00105,00105,00105,00105,00115,00115,00115,00315,00

70,5070,5070,5073,0073,0073,0079,0079,0079,00

231,00

LLG Timer with Triple Alarms, 1-channel

L A B W A R E

®

Whirl-Pak® Sample bags, PE, sterile

Whirl-Pak® bags are sterile polyethylenelaboratory sample bags used to transportsamples for biological testing and otherapplications.With or without write-on strip.Temperature range -210°C to +82°C

Conductivity monitoring, 3D

Folding Box maxi, PP, foldable andstackable, active lock

2

Fast and Easy

Measuring cylinders, DURAN®, tall form,class A, blue graduationsIN (TD) calibrated. With spout and hexagonalglass base. Main point ring graduation. With dated batch identification. Conformitycertified. Graduation in durable blue enamel,acc.to DIN EN ISO 4788.Batch calibration reports, which are free of charge,can be generated and printed onwww.hirschmannlab.com. Additional singlecalibration reports or DAkkS certificates (former DKD calibration reports) are available.

Capacity Grad. Tolerance Height PK Cat. No. Price Now

ml ml ± ml mm DKK DKK1025501002505001000

0.20.5112510

0.10.250.50.51.02.55.0

140170200260335390470

1111111

9.274 1819.274 1829.274 1839.274 1849.274 1859.274 1869.274 187

77,0077,0079,5081,50

135,00205,00355,00

40,0040,0041,0043,5074,00

111,00187,00

Also available with dated batch identfication acc. to USP (US Pharmacopeia).

Lab consumables

For more articles see our Laboratory Catalogue from page 15, 163, 830 onwards

According to ISO 7056.Printed blue graduations.

Capacity Grad. Diam. Height PK Cat. No. Price Now

ml ml mm mm DKK DKK255010025050010002000

51010255050100

3239506788

109133

47607093

119147184

2222221

9.013 6709.013 6719.013 6729.013 6739.013 6749.013 6759.013 676

13,0014,0016,0025,5039,0065,5050,50

8,038,81

10,5016,5025,0041,5027,50

Stackable. Highly transparent.With easily readable, printed black scale on both sides and stable handle. The volume is easy to read for either hand.To preserve markings, do not clean at temperatures exceeding 60ºC. For autoclaving we recommend the design with raised graduations (cat. nos. 7.008 967 and 7.008 978).Food-safe (suitable for contact with foodstuff in accordance with Regulation EC No. 10/2011).

Capacity Grad. Diam. Height PK Cat. No. Price Now

ml ml mm mm DKK DKK250500100020003000

510102050

75100125148170

115140167212242

11111

9.275 7389.275 7409.275 7429.275 7449.275 746

19,5021,5030,0061,5083,00

12,5014,0019,5039,5053,50

Molecular model system Molymod®

The Molymod® system is an original, unique system of high quality molecularmodels.The set consists of a variety of atom parts and links designed to make a largenumber of possible structures relevant to a specific chemistry subject or use,e.g. Biochemistry, Organic or Inorganic. All sets are fully compatible.Atom parts are made of solid clouded plastic spheres. They are available withholes from 1 to 6 in the usual angular orientations.

Type Description PK Cat. No. Price Now

DKK DKKIntroductory SetOrganic Set, largeBiochemistry Set, largeOrganic Set, smallInorganic/Organic Set, smallInorganic/Organic Set, largeMolecular Orbital Organic

Molecular self-assembly kitInorganicMolecular self-assembly kitInorganicMolecular self-assembly kitInorganicMolecular self-assembly kitInorganic

48 atom parts, 62 links111 atom parts, 140 links257 atom parts, 160 links50 atom parts, 64 links51 atom parts, 38 links106 atom parts, 86 linksCarbon 12/18 hydrogen bonds 9/18diamond 30 atoms

graphite 45 atoms

sodium chloride, 27 atoms

water 26 units

1111111

1

1

1

1

9.883 1019.883 1039.883 1079.883 1089.883 1099.883 1049.883 111

9.883 112

9.883 113

9.883 114

9.883 115

215,00445,00835,00225,00225,00445,00405,00

155,00

205,00

215,00

235,00

173,00349,00658,00174,00175,00347,00326,00

123,00

169,00

170,00

185,00

The advanced miniDNA® system comprises colour-coded, abstract-shapedparts designed to represent the nitrogenous bases, pentagonal sugar andpyramidal phosphate components needed to make a double-helix model ofDNA. The three hydrogen bonds that connect Cytosine to Guanine and the twothat connect Thymine to Adenine are represented by the appropriate numberof pegs.Two DNA kits are available to make either a 12-layer (1 turn) or 22-layer (2 turns) DNA model. A similar approach can be taken with the two RNA kits tomodel the process of Protein Synthesis known as Transcription.


DKK DKKminiDNA®

miniDNA®

12-layer Kit22-layer Kit

11

6.261 3706.261 344

255,00455,00

206,00360,00

Molecular model system miniDNA®

Extendend Range of Products Available

LLG-Griffin beakers, PP

Graduated jugs, PP, black graduations

3

L A B W A R E

®

Occupational safety

For more articles see our Laboratory Catalogue from page 194 onwards

Respirators play an important part in keeping you and your workers protectedin your workplace- Single loop strap for easy adjustment- Dust mask headband does not contain natural rubber latex material to

decrease the risk of allergic reaction- Comes with a metal-detectable adjustable nose clip for easy checking if

respirator mask is worn properly- Coloured noseclip allows for easy identification of Respirator Masks: yellow

for FFP1, blue for FFP2, and red for FFP3- Valved Respirator Masks allows longer continuous use, effective removal of

heat and moisture buildup and reduced misting when used with eyewear

Description Protection-level

Colour coding


DKK DKKFolding maskFolding mask, with valveFolding maskFolding mask, with valveFolding mask, with valve

FFP1FFP1

FFP2FFP2

FFP3

yellowyellow

blueblue

red

2010

2010

5

6.269 5836.269 581

6.269 5806.269 579

6.269 582

92,5070,00

122,0082,00

85,00

69,0053,00

91,0062,00

63,00

6.269 580

6.269 579

The convex cup-shape design, along with twin strap design, nose foam andnose clip ensure comfortable wear over a range of face sizes. The collapseresistant shell offers durable, comfortable protection particularly in hot andhumid conditions.- Traditional convex shape, with nose clip and twin strap design.- Durable, collapse resistant inner shell.- Reliable, effective protection against fine particles.- 3M™ Advanced Electret Filter Material gives effective filtration with low

breathing resistance for consistent high quality performance.- Coloured headbands for easy identification: yellow for FFP1 and blue for FFP2.

- Very good compatibility with panoramic eyeshield 3M™

Type Description Protection-level


DKK DKK8710881088128822

without valvewithout valvewith Cool-Flow valvewith Cool-Flow valve

FFP1 NR DFFP2 NR DFFP1 NR DFFP2 NR D

20201010

6.050 6406.078 9426.202 0806.052 910

165,00315,00155,00225,00

136,00258,00128,00185,00

6.050 640 6.078 942 6.202 080 6.052 910


DKK DKK6501QL6502QL6503QL

Half Mask, size SHalf Mask, size MHalf Mask, size L

111

6.266 9876.266 9886.266 989

205,00205,00205,00

178,00178,00178,00

Type Protection-level

Description PK Cat. No. Price Now

DKK DKK

6051605460556057

6059

6075

6096

5911

5925

5935

501

A1K1A2ABE1

ABEK1

A1+Formaldehyd

A1HgP3NR

P1R

P2R

P3R

against organic vapoursagainst ammoniaagainst organic vapoursagainst organic, inorganic and acid vapoursagainst organic, inorganic and acidvapours, ammonia and particlesagainst organic vapours andformaldehydeagainst mercury vapours and particles

for use in combination with Gas andVapour Cartridgesfor use in combination with Gas andVapour Cartridgesfor use in combination with Gas andVapour Cartridges

for combination of Gas and VapourCartridge with Particulate Filters

2222

8

2

2

2

2

2

2

6.269 590 6.269 584 6.269 588 6.269 589

7.620 305

6.269 586

6.269 585

6.267 784

6.267 785

6.267 786

6.269 587

87,00105,00103,0099,00

435,00

100,00

350,00

21,50

53,00

65,50

31,00

68,0083,0081,0078,00

342,00

78,00

278,00

17,00

41,50

51,50

25,00

6.269 589

6.269 588

6.267 786

6.269 587

7.620 305

All filters fit via bayonet-click connection to the mask series 6000, 6500, 6500 QL, 7500 and 7000. The right filter for every application - No matterwhich working area, using 3M™ Respirators, the comprehensive 3M™ Filterprogram, gives optimum safety and provides versatile application possibilities.The compatible 3M™ range of filters includes combinable changeable filtersagainst gases, vapors and/or particles and also combination filters.

Respirators 8000 series, Moulded Masks

Respirators Series K100 Economy, Folding Masks

Half Mask Series 6500QL

The 3M™ Rugged Comfort Half Facepiece Reusable Respirator is designed withharsh and dirty worksites in mind. Stay productive and protected - the 6500QLSeries delivers comfort, durability and stability with a firm, lightly texturedsilicone faceseal and strong body construction.- Bayonet Connection, Compatible with all bayonet style 3M™ cartridges and

filters- Overmoulded/Low-Profile Design- Cool Flow™ Valve- Directs exhaled breath and moisture downward- Easy positive pressure seal check- Provides comfort and stability with a soft but firm faceseal

Please order matching filters separately (please see below).

4

Gas and Vapour Cartridge

Particulate Filters

Filter Retainer

Compatible Filter System for 3M Half andFull Masks

Occupational safety


Safety Eyeshields SecureFit™ 200

- 3M Pressure Diffusion Technology allows temples to naturally adjust toindividual head sizes.

- Self-adjusting feature eliminates need to stock multiple frame sizes atworksites.

- Secure, snug fit keeps eyewear in place without slippage even when theperson is in motion.

- Anti-fog coating helps keep lenses free of moisture in hot and humidconditions.

- Polycarbonate lenses absorb 99.9% UVA and UVB

Colour Lens PK Cat. No. Price Now

DKK DKKclearcleargreyamber

2C-1.2, UV, anti-scratch, anti-fog2C-1.2, UV, anti-fog2C-1.2, UV, anti-scratch, anti-fog2C-1.2, UV, anti-scratch, anti-fog

1111

9.006 1279.006 1289.006 1299.006 130

48,5041,0048,5048,50

36,5031,0036,5036,50

Disposable Gloves KIMTECHSCIENCE*GREEN NITRILE*, Nitrile,Powder-Free

KIMTECH SCIENCE*GREEN NITRILE gloves offer the fit and feel of latex withthe protection of a Category III PPE glove.

- Reduces waste and disposal costs by at least 60%- Reduced storage - 150% more gloves in the same sized box as conventional

latex gloves- Contains no natural rubber latex- Textured fingertip, enhances wet and dry grip- Powder-free- Beaded cuff, for added strength and ease in donning- Unique green colour provides quick visual differentiation- Ambidextrous- Virus Protection

Quality Standards- Meets AQL 0.65, G1 Inspection for water tightness- This is a PPE Category III product classified by EC Council Directive

89/686/EEC. It is tested in accordance with the EN Norms EN 420:2003. Cat. III Low Chemical resistant.

- Manufactured in accordance with Quality System ISO 9001- Virus protection according to ISO 16604 procedure B:2004- Dexterity Classification (EN 420:2003) = 5

EN 374 EN 374 EN 420

Size Length PK Cat. No. Price Now

cm DKK DKKS (6-7)M (7-8)L (8-9)

242425

250250250

7.970 2247.970 2257.970 226

225,00225,00225,00

119,00119,00119,00

Particle-tight, and to a limited extent, spray-tightchemical protective clothing.

The coverall made of 3-layer SMS material(spunbond-meltblown-spunbond) is robust andbreathable. A meltblown filter membrane isembedded between two durable outer layers.Comfortable to wear, this coverall is a pleasant,protective companion in many work areas. Specialfeatures are the hood, the zipper cover strip, the backrubber element, and the arm and leg rubberelements.

Cat. III/CE0321/Type 5/6

Coverall individually packed!

Size PK Cat. No. Price Now

DKK DKKMLXLXXLXXXL

55555

6.266 6406.266 6416.266 6426.266 6436.266 644

245,00245,00245,00245,00245,00

136,00136,00136,00136,00136,00

LLG-Overall tritex® pro White, Type 5/6

L A B W A R E

®

9.006 127 9.006 128

9.006 129 9.006 130

5

pack of 250 gloves

pH- and conductivity measurement


SpecificationsMeasuring range: 0 to 14pHAccuracy: ±0.03pHResolution: ±0.01pHOperating temperature: 0 to +50°CStorage temperature: -25 to +60°CBattery: Lithium 3V/1AhBattery lifetime: approx.. 5 yearsDimensions (W x L x H): 54 x 110 x 22mmWeight: approx. 200g


DKK DKKST 1000 pH meter set 1 6.266 915 2.920,00 2.425,00

SpecificationspHMeasuring range: -2 to 20 pHResolution: 0.01/0.1Accuracy: ±0.01mVMeasuring range: -1999 ... +1999mVResolution: 1Accuracy: ±1Relative mV-measurement: yesTemperatureMeasuring range: -5.0 ... 105.0°CResolution: 0.1°CAccuracy: ±0.5°CDimensions (WxDxH): 222 x 70 x 35mm


DKK DKKS2-MeterS2-Standard kitS2-Field kitS2-Food kitS2-Light kit

11111

6.265 4146.265 4156.265 4166.265 4176.265 418

3.445,004.270,004.595,006.420,003.770,00

2.830,003.560,003.825,004.115,003.150,00

6.265 415

pH-value

Capacity Colour PK Cat. No. Price Now

at 25 °C ml DKK DKK4.007.0010.00

250250250

redyellowblue

111

9.040 8689.040 8699.040 871

70,0070,0070,00

37,0037,0037,00

LLG-Electrolyte solutions, KCLPotassium chloride electrolyte for pH electrodes - to fill the referenceelectrolyte or as a storage solution for electrodes.


DKK DKK3mol/l, 1000ml3mol/l, 250ml3mol/l, (AgCl saturated.), 250ml

111

9.041 3709.041 3719.041 372

215,0087,50

125,00

124,0051,0070,50

Portable pH meter with external electrode.- BNC connection- With automatic pH calibration- Handy and robust- Current value memory- Simple calibration with keypad- Electrodes for different applications- Min/Max- and hold function

Penetration electrode AT 206 for measurements in semi-solid food stuffand other materials. Housing material: Glass, Diameter shaft/electrode:25mm/5mm, Length shaft/electrode: 65mm/12mm, with 1m cable and BNC plug

pH meter set contains: pH meter PHT 810, penetration electrode AT 206,punching pin, buffer solutions pH 4 and pH 7, KCI solution, carrying case, 2-point calibration certificate

6

L A B W A R E

®

LLG-pH-Buffer solutions with colour codingin twin-neck dispensing bottlesThe ready-to-use buffer solutions offer excellentquality, precision and advantages in use. The calibration vessel, integrated into the twin-neck dispensing bottles, allows the particularlyeconomical dispensing of the solution andprevents contamination.

Features- Accuracy ±0.01 pH, tested and certified

at 25°C- Temperature dependence data table printed

on the label- Traceable to NIST- Shelf-life: 24 months (pH 7 and 10) or 36 months (pH 4) from date of production

- Colour-coded

pH meter PHT 810 pH-meter Seven2Go™ S2

Portable routine model for pH measurement- New, intuitive menu structure with fast and easy T-Pad navigation in 12 languages

- Robust design with IP67 protection for use in harsh and demanding environments

- Intelligent Sensor Management (ISM®) functionality reduces the risk of errors

- Up to 5 point calibration with automatic bufferrecognition and temperature compensation

- 4 predefined buffer groups and 1 user defined buffer group

- Automatic, manual and time dependant endpoint recording

- Data memory storage for 200 data points- Power requirements: 4 x 1.5V AA or1.3V NiMH accumulators

Items supplied:S2-Meter: Instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity and batteries.S2-Standard kit: As S2-Meter, but also with InLab Expert Pro-ISM-IP67, buffer sachets for pH 4.01, 7.00, 9.21 and 10.00.S2-Field kit: As S2-Standard kit, but also with bottles for calibration and uGo™ carrying case.S2-Food kit: As S2-Field kit, but with InLab Solids Pro-IP67 instead of InLab Expert Pro-ISM-IP67.S2-Light kit: As S2-Standard kit, but with InLab Versatile Pro instead of InLab Expert Pro-ISM-IP67.

pH- and conductivity measurement


Type Capacity PK Cat. No. Price Now

ml DKK DKK84 µS/cm147 µS/cm1.413 µS/cm12.880 µS/cm

500500500500

1111

9.040 8619.040 8629.040 8639.040 864

135,00135,00135,00135,00

70,0070,0070,0070,00

Portable routine model for conductivity measurement

- New, intuitive menu structure with fast and easy T-Pad navigation- Robust design with IP67 protection for use in harsh and demanding

environments- Intelligent Sensor Management (ISM®) functionality reduces the risk of

errors- Easy 1 point calibration with option of manual cell constant entry- 3 predefined standards and 1 user defined standard- Automatic, manual and time dependant endpoint recording- Data memory storage for 200 data points- Power requirements: 4 x 1.5V AA or 1.3V NiMH accumulators

Supplied with:S3-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity and batteries.S3-Standard kit: As S3-Meter, but also with InLab 738-ISM and sachets ofconductivity standards 1413 µS/cm and 12.88 mS/cm.S3-Field kit: As S3-Standard kit, but also with bottles for calibration anduGo™ carrying case.S3-Bioethanol kit: As S3-Field kit, but also with InLab 725 instead of InLab 738-ISM.

SpecificationsConductivityMeasuring range: 0.010μS/cm … 500mS/cmResolution: 0.001 ... 1 (auto-range)Accuracy: ±0.5%TemperatureMeasuring range: -5.0 ... +105.0°CResolution: 0.1°CAccuracy: ±0.2°CTDS (Total Dissolved Solids)Measuring range: 0.01mg/l ... 300g/lResolution: 0.01 ... 1 (auto-range)Accuracy: ±0.5%Specific resistanceMeasuring range: 0.01 ... 100.0MΩcmSalinityMeasuring range: 0.01 ... 42psuConductivity AshMeasuring range: 0.01 ... 2022%Dimensions (WxDxH): 222 x 70 x 35mmType PK Cat. No. Price Now

DKK DKKS3-MeterS3-Standard kitS3-Field kitS3-Bioethanol kit

1111

6.265 2476.265 2486.265 2496.265 250

3.670,005.445,005.745,005.795,00

3.015,004.510,004.780,004.825,00

6.265 248

SpecificationsTemperature range: -5 to 100°CpH range: 0 to 14pHZero point: pH=7.0 ±0.3Length/diam.: 120/12mmBlueline 13 pH: 170/12mmElectrolyte: Liquid, KCl 3mol/lDiaphragm: PlatinumBlueline 13 pH: Ground jointMembrane shape: ConicalBlueline 13 pH: CylindricalMembrane resistance at 25°C: 250MΩBlueline 13 pH: 300MΩRefill hole cover: Slide

Type Temperaturesensor

Connector PK Cat. No. Price Now

DKK DKKBlueLine 11 pHBlueLine 12 pHBlueLine 13 pHBlueLine 14 pHBlueLine 14 pH ID

BlueLine 14 pH IDSBlueLine 15 pHBlueLine 15 pH ID

BlueLine 15 pH CinchBlueLine 17 pHBlueLine 18 pHBlueLine 19 pH

---NTC 30 kΩNTC 30 kΩ

NTC 30 kΩNTC 30 kΩNTC 30 kΩ

NTC 30 kΩ-Pt 1000Pt 1000

Plug headDINPlug headDIN + BananaDIN + 4-mm-banana,ID functionDigital plugBNC + BananaBNC + 4-mm-banana,ID functionBNC + CinchBNCDIN + BananaBNC + Banana

11111

111

1111

6.269 3226.269 3236.269 3246.269 3256.269 326

6.269 3276.269 3286.269 329

6.269 3306.269 3316.269 3326.269 333

885,00995,00

1.520,001.545,001.770,00

1.770,001.545,001.770,00

1.745,00975,00

1.545,001.545,00

772,00877,00

1.315,001.345,001.540,00

1.540,001.345,001.540,00

1.525,00851,00

1.345,001.345,00

Package:

7

Conductivity meter Seven2Go™ S3 pH electrodes BlueLine, refillable

LLG-Conductivity Solutions- Directly traceable to NIST- ISO17025 Certificate including actual value,

expiration date and uncertaintyof measurement

- Actual expiry and temperature dependencedata on label

- All standards are aqueous based and non-hazardous

- Supplied in unbreakable PE-HD bottle- Values stated at 25°C: Accuracy ±1%

L A B W A R E

®

+

pH combination electrode with glass body, Ag/AgCl reference system. Withfixed cable, 1m length (BlueLine 14 pH IDS 1.5m). BlueLine 11 pH andBlueLine13 pH with screw head (LB 1A or LB 1BNC cable combination pleaseorder separately).For each electrode, you receive an electrode vessel for free (Cat. No .: 7.624 578)

Analytical measurement

For more articles see our Laboratory Catalogue from page 354, 407 onwards

LLG-Melting point apparatus

Ideal for determination of the melting point of powders and substances that donot have a clear transparent melting point.Both models have the following properties:- Digital temperature control- Sample can be monitored through a magnifying glass with integrated light- For capillaries with 1.4mm outer diameter- Automatic fan cooling that activates to cool off the device after completion ofthe measurement

- Text display of error messages- Keyboard covered with foil for easy cleaning- With operating instructions in German and English; brief instructions right onthe device

- With integrated printer for saving space (only HV2)

MPH-H2 for visual, semi-automatic measurement with magnifying glass,without printer:In this model, the melting point is determined visually and then saved bypushing the "Save" key.

MPH-HV2 for visual measurement with magnifying glass or automaticmeasurement, with printer:For either fully automatic or visual measurements, 1 sample each.With this version, you can specify whether you want to observe the meltingprocess through the magnifying glass or have the melting point determinedautomatically after the pre-set starting temperature is reached (indicated bysound signal).The scope of delivery contains 100 melting point determination capillaries anda device protection hood. For refill pack melting point tubes for LLG-Meltingpoint apparatus, please order Cat. No. 9.208 131.

SpecificationsMeasuring range: 25.0°C to 360.0°CResolution: 0.1°CAccuracy: ±0.5°C (+25°C to +200°C)

±0.5% of measured value °C (rem.measuring range)

Heating rate at fast heating: to 200°C, approx. 4 minto 350°C, approx. 8 min

Heating rate when measuring: 1°C/minMagnifying glass: 10xLighting: 2 x LEDDimensions (WxDxH): 230mm x 220mm x 315mmDimensions capillaries: 1.4mm x 80mmWeight: 4.5kgPower supply: 115-230V, 50HzType Description PK Cat. No. Price Now

DKK DKKMPM-H2MPM-HV2

Visual measuring / magnifierVisual or automaticalmeasuring with printer

11

9.208 1209.208 121

10.295,0015.395,00

7.635,0011.480,00

Analytical balance Entris®

The new Entris ® was specially designed for effective and reliable every dayweighing. The simple and clearly structured user surface, with its logical keyassignment and very good readability, is ideal for safe working.

- Easy-to-use: Excellent readability by the backlit and high-contrast display,navigation with the function keys and the easy-to-read water level on thefront allows for easy and fast operation.

- Basic applications: Entris® supports you in your daily weighing withintegrated basic applications like animal weighing, density determination,counting, percent weighing or convert.

- Easy cleaning: the windshield, the side windows, the sliding cover and allstainless steel parts are easily removable for easy cleaning.

- High accuracy: The monolithic weighing system guarantees a permanentlyhigh measurement accuracy and represents the reliability and quality of aSartorius balance.

- i-Type balances have internal calibration, balances without i in Typedesignation have external calibration

- Dimensions (WxDxH): 230 x 303 x 330mm), Height weighing space:240mm, Plate diam.: 90 mm

- Readability/Reproducibility: 0.1mg, Linearity: ±0.2mg

Supplied with: Universal power adapter, installations and operation manual,windshield as indicated

Type Weighingrange

Calibration PK Cat. No. Price Now

g DKK DKKENTRIS64i-1SENTRIS64-1SENTRIS124i-1SENTRIS124-1SENTRIS224i-1SENTRIS224-1S

6060120120220220

internalexternalinternalexternalinternalexternal

111111

6.262 5746.262 5756.262 3276.262 5736.262 4686.262 572

11.495,009.995,00

12.295,0010.795,0013.095,0011.695,00

9.950,008.655,00

10.680,009.375,00

11.400,0010.100,00

8

L A B W A R E

®

Homogenisers


The PT2500 E is the ideal solution for cost-consciouslaboratories. It is able to perform a lot of applications.

- Application volume 0.05 to 2500ml- Soft start prevents splashing of homogenate from

sample vessel- Tip speed up to 32m/s- Speed remains constant even when viscosity changes- Various models of dispersing aggregates in Easy-to-Clean design

Applications:- General homogenisation applications (dispersion and

emulsification)- Formulation of lotions, creams and food- Production of oil-water emulsions

Please order tools separately.

SpecificationsApplication volume: 0.05 to 2500mlMotor input power: 500WAggregates: diam. 3, 5, 7 and 12mm and diam. 20mm

and 25mmSpeed range: Stepless 500 to 30.000min-1

Max. viscosity: 6000mPasDrive Dimensions (L x W x H): 157 x 76 x 236mmTested to: IEC/EN61326-1/IEC/EN 61000-6-2/EN

61000-6-4 IEC/EN 61010-2-51


DKK DKKPOLYTRON® PT 2500 E with EU plug, set with stand and bracketPOLYTRON® PT 2500 E with EU plugPOLYTRON® PT 2500 E with CH plug

1

11

4.013 108

7.981 1856.263 341

15.195,00

11.295,0011.295,00

13.140,00

9.810,009.810,00

Dispersing aggregates for HomogeniserPOLYTRON® 2500 E

Type Length Diam. Workingvolume


mm mm ml DKK DKKPT-DA 03/2 EC-E050PT-DA 05/2 EC-E085PT-DA 07/2 EC-E107PT-DA 07/2SYN-E082PT-DA 12/2 EC-E157PT-DA 20/2 EC-E192PT-DA 20/2X EC-E116PT-DA 25/2 EC-E192

5085

10782

157192116192

3577

122

2025

0.05 - 20.1 - 50.3 - 100.3 - 102- 250100 - 250010 - 250100 - 2500

111

251111

6.258 2699.570 2236.258 2716.258 2739.570 2256.258 2349.570 2269.570 227

8.745,009.245,009.745,004.795,00

11.695,0010.795,0012.695,0013.195,00

7.435,007.875,008.265,004.090,009.625,008.855,00

10.480,0010.880,00

Ultrasonic homogeniser, SONOPULS HD 4050

Ready-to-operate basic equipment for volumes from 0.5 ml to 100 mlconsisting of:- HF generator GM 4100- ultrasonic converter UW 50- titanium probe TS 102, dia. 2 mm

Set included: generator GM 4100, ultrasonic converter UW 50, titanium probe TS102 and with the choice of an additional probe(TS102, TS103, TS104 or TS106)

Note: The homogeniser can be used with the stand HD4050 also as adesktop unit. Cat. No.: 9.650 273

HF generator GM 4100Dimensions: 150 × 220 × 335mmConverter UW 50Dimensions:HF power:

45 diameter x 175mmmax. 50Weff


DKK DKKplus additional sonotrode TS102plus additional sonotrode TS103plus additional sonotrode TS104plus additional sonotrode TS106stand for HD4050

11111

9.650 1479.650 1489.650 1499.650 1509.650 273

21.095,0021.095,0021.095,0021.095,004.645,00

18.120,0018.120,0018.120,0018.120,00

3.310,00

9

Homogeniser, POLYTRON® PT 2500 E

Choice of package with

additional probe

Support not included.

Magnetic stirrers


SpecificationsStirring quantity (H2O): 3lSpeed range: 100 to 1500rpmSetting accuracy: ±10rpmMagnetic bar: max. 50mmDisplay: LEDHeating plate: 135mm diam./Stainless steelPermissible ambient temperature: 5 to 40°CTemperature range: RT to 280°CSetting accuracy: ±1°CControl accuracy: ±2°CHeat output: 500WSafety temperature: 320°CDimensions (WxDxH): 155 x 215 x 100mmWeight: 1.5kgPower supply: 200 - 240V, 50/60HzProtection class: IP 42Warranty: 3 years


DKK DKKuniSTIRRER 3 with EU-pluguniSTIRRER 3 with UK-plug

11

6.263 4106.263 411

2.495,002.445,00

1.580,001.580,00

SpecificationsStirring quantity (H2O):Motor rating input/output: 16/9WSpeed display: digitalSpeed range: 50 to 1500rpmMax. magnetic bar (L x dia.): 80 x 10mmHeating functionTemperature display:Heat output: 600WHeating rate (1 litre H2O in H 15): 6.5K/minTemperature range: RT to 310°CSetting accuracy: ±1KTemp. variation without temp. sensor: ±2KAdjustable safety circuit: 50 to 360°CControl accuracy with sensor: PT 1000/±1K

ETS-D5/±0.5K

Material:Dimensions: 135mm diam.General dataDimensions (WxDxH):Weight: 2.5kgOperating temperature range: 5 to 40°COperating humidity range: 80% R.H.Protection class acc. to DIN EN 60529: IP42

20 litres

digital

Heating platealuminium alloy

160 x 270 x 85mm


DKK DKKRCT standard safety control package incl. ETS-D5and stand accessories

1 9.720 258 6.445,00 5.135,00

10

LLG magnetic stirrer with heating

L A B W A R E

®

Cost effective magnetic stirrer with all essential functions and equipmentfeatures. A LED display to control all parameters, an integrated temperaturecontrol as well as an enclosed design (IP42) are integrated features. Theincluded PT-1000 sensor ensures an exact temperature control. A stand rodwith a sensor holder is supplied with this instrument. The integrated HOT-signwarns the user of a hot plate even if the device is switched off. 3 yearswarranty.

- LED display to set the exact rotation speed and the temperature- Digital controlled rotation speed and temperature- 'HOT' warning sign, even if the device is switched off- Sensor PT-1000 is included- Integrated temperature control- Stand rod and sensor holder is supplied

Delivery includes: magnetic stirrer with PT-1000, stand rod and fixingmaterial

uniSTIRRER 3, complete set

L A B W A R E

®

RCT standard safety control package incl.ETS-D5 and stand accessories

- integrated temperature control- incl. PT 1000 temperature sensor (PT 1000.60) + ETS-D5- exact temperature and speed setting via digital display, even when switched off

- digital display of set safety temperature limit- hot top indicator, hot surface warning to prevent burns- digital error code display- with adjustable safety circuit of heating plate temperature (+50 to +360°C)

- safety magnetic stirrer with heating, suitable for unsupervised operation

- DIN 12878 connector for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control directly in the heated medium

- enhanced safety due to improved heat control technology- enclosed assembly (IP42) guarantees long service life- highly polished, aluminium hotplate for optimal heat transfer

- improved magnetic coupling- supplied with housing protection cover H 98

Pack Deal

Made in Germany

Magnetic stirrers - Accessories


LLG-Magnetic stirring bars, cylindrical,PTFE, eco pack

Circular, smooth and PTFE-coated. Packaging size: 10 pieces

Length Diam. PK Cat. No. Price Now

mm mm DKK DKK1012152025253035404550607080

63666866888999

1010101010101010101010101010

9.198 9109.198 7669.198 9199.198 9209.198 9259.198 7679.198 9309.198 9359.198 9409.198 9459.198 9509.198 9609.198 9709.198 980

74,00145,0087,50

105,00125,00195,00155,00175,00265,00315,00355,00435,00595,00705,00

42,5078,0050,0057,5074,50

106,0088,50

112,00152,00180,00202,00248,00341,00401,00

Set 1 in a transparent box with hinged lid

Consisting of: 2x 20 x 6 mm, 2x 25 x 6mm, 2x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

Set 2 in a transparent box with hinged lid including magnetic stirring barretriever, length 245 mm

Consisting of: 1x 15 x 6 mm, 2x 20 x 6 mm, 2x 25 x 6mm, 1x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm


DKK DKKSet 1Set 2

11

6.267 3176.267 318

275,00415,00

242,00357,00

6.267 318

Heated magnetic stirrer hotMIX 1 withinternal control

Cost-effective magnetic stirrer, 100% maintenance-free and wear-free byinductive 2mag magnetic drive concept for mixing of solutions, speed rangefrom 100rpm up to 1600rpm, jerk-free stirring even at low speeds. SoftStartfor reliable catching/centering and safe accelerating of the stirring bar,resistant stainless steel housing for fast and easy cleaning, spill-overprotection and extremely robust construction. Hot plate made from resistantaluminium alloy, max. heating temperature +200°C, socket for contactthermometer (accessory), warning-LED in case of hot plate, 3 integrated overtemperature protection loops against overheating.

SpecificationsOperating conditions: -10°C to +40°C at 80% R.H. max.Housing: Stainless steelHotplate: AluminiumSpeed range: 100 to 1600rpmCapacity: 1 to 2000mlDimensions (W x D x H): 120 x 140 x 80mm Power: 10WWeight: 2kgProtection category: IP 20


DKK DKKhotMIX 1 1 6.238 077 4.620,00 4.010,00

PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars fromaggressive liquids, prevents loss of stirring bars. Lower end diameter 10mm.

Length Diam. PK Cat. No. Price Now

mm mm DKK DKK150 8 1 9.197 717 84,50 64,00

11

L A B W A R E

®

LLG-Magnetic Stirring Bar Retrievers, PTFE

Magnetic stirring bar behrotest, set 1 + 2

L A B W A R E

®


Type Lift Capacitor Coating PK Cat. No. Price Now

DKK DKKR-300R-300R-300

manuallyelectricelectric

verticalverticalcold trap

noyesyes

111

6.267 8876.267 8886.267 889

34.795,0038.795,0041.295,00

31.220,0034.850,0037.100,00

Type Lift Capacitor Coating Heatingbath


DKK DKKR-300SR-300SR-300S


verticalverticalvertical

yesyesyes

B-301B-301B-305

111

6.267 8936.267 8946.267 895

71.795,0074.595,0076.295,00

64.470,0066.940,0068.490,00

Rotary Evaporator Rotavapor® R-300 withvacuum pump and interfaceEvery Rotary Evaporator Rotavapor® R-300 will be delivered with atransparent PLASTIC+GLAS (P+G) safety coating, a vertical glassassembly (V), NS29/32, and a vacuum pump V-300.Interface and heating bath could be chosen from the options below.

InterfaceI-300 with VacuBox, Woulff bottle. Operation by navigation knob and functionkeys. Compatible with BUCHI Rotavapor App for mobile push notifications andremote monitoring.I-300 Pro with VacuBox, Woulff bottle. Operation by touch screen ornavigation knob. Charting and recording possibilities (on SD card). Compatiblewith BUCHI Rotavapor App for mobile push notifications and remotemonitoring (including charting).

Heating BathHeating bath B-301: Temperature range of 20°C to 95°C for evaporating flasksup to 1 liter.Heating bath B-305: Temperature range of 20°C to 220°C for evaporatingflasks up to 5 Liter.

Vacuum pumpV-300 (1.8m3/h, 5mbar) is a chemically resistant PTFE diaphragm vacuumpump with transparent front panel to observe the membrane for highestdistillation efficiency. Final vacuum: 5 mbar (±2 mbar). Suction capacity: 1.8 m³/h. Speed-controlled operation.

For more specifications please see our main catalogue at page 616.

Evaporating rotators

12

The rotary evaporator R-300 meets the highest needs in convenience,productivity and versatility. The rotation speed, heating temperature and liftposition is shown digitally on the heating bath.The following options are available:Manual or electronically liftTransparent PLASTIC+GLAS (P+G) safety coating.Heating bath B-301: Temperature range of 20°C to 95°C for evaporating flasksup to 1 liter.Heating bath B-305: Temperature range of 20°C to 220°C for evaporatingflasks up to 5 Liter.Vertical condenser used along with a recirculating chiller or tab water.Cold trap used for low boiling solvents along with e.g. dry ice for cooling.Other glass assembly configuration on request

For more specifications please see our main catalogue at page 615.

Rotary Evaporator Rotavapor® R-300 Rotavapor® R-300 with heating bath B-301

Rotavapor® R-300 System with Interface I-300

Type Lift Capacitor Coating PK Cat. No. Price Now

DKK DKKR-300R-300R-300


verticalverticalcold trap

noyesyes

111

6.267 8906.267 8916.267 892

36.595,0040.695,0043.195,00

32.870,0036.490,0038.740,00

Type Lift Capacitor Coating Heating bath


DKK DKKR-300PR-300P

electricelectric

verticalvertical

yesyes

B-301B-305

11

6.267 8966.267 897

83.695,0085.495,00

75.140,0076.690,00


Sleek design, small footprintSilent for a pleasant working environmentVersatile use, simple operation

Features- Chilled condenser is easy to detach by turning the tension nut. The chilled

condenser is also extremely easy to clean.- Relevant parameters for distillation and for the heating bath are easily set by

touching and turning.- Cordless heating bath with drain for safe bleeding and emptying without

spillages.- Hose guide inside the tower - tidy and safe, hoses are no longer an

obstruction.- Easy flask exchange - glass flask simply locks into place - and can be done

with one hand.- Convenient, fully adjustable flask angle set via a control knob.

SpecificationsHeating bath: heating bath temperature 20 - 180°CCoolant supply (chilled condenser)Permissible pressure: 3barPermissible temperature: 15°C bis +20°CCooled surface area: 1230cm²Parameters of evaporation flaskSize of evaporation flask: 50 - 3000mlRotational speed: 25 - 250 min-1

Length of stroke: 150mmLifting speed: approx 38mm/sDimensions (L x H x W)Without glassware: 447 x 464 x 431mmWith glassware: 447 x 823 x 487mmWeight: 9.1kg


DKK DKKRotary evaporator RC 900Protective cover for heating bath

11

7.660 0527.660 053

31.495,003.095,00

28.310,002.690,00

Evaporating rotators

13

Rotary evaporator RC 900Rotavapor® R-300 with heating bath B-305

Rotavapor® R-300 System with Interface I-300 Pro

Freezers and ULT-Freezers


Ultra low temperature freezer, ULUF series up to -90°C

Reliable and powerful upright freezer with extra storage capacity and a user friendly controller. Models withvolumes from 7 litres up to 826 litres are available. Features as non-manipulative data logger and USBreadout are just some of the features that come as standard in the ULUF series.

Features on ULUF series- Low energy consumption- Low noise level, low heat dissipation- Insulated inner doors- Castors- Lock on door- Ergonomic loading- Heated door frame, heated vacuum valve- 100% HCFC/CFC free- Porthole for external temperature probes- Single-compressor (ULUF 15, 65, 125, 450, 550, 750, 850) or two compressor systems as security in case

of failure of a compressor.Upon failure of a compressor, the temperature is maintained at -86°C by the second compressor at ULUF 490and 890, for ULUF 750 at -70°C.

Accessories (optional)- All freezers are available with stainless steel housing (on request)- CO2 back up- GSM alarm module- Racks and boxes- Temperature chart recorder- Drawer systems

Type Capacity Internal dimensions(W x D x H)

External dimensions(W x D x H)

Weight Temp.range


Litres mm mm kg max. °C DKK DKKULUF 15ULUF 65ULUF 125ULUF 450ULUF 550ULUF 750ULUF 850ULUF 490*ULUF 890*

755

115413585680826393786

150 x 143 x 310360 x 468 x 320360 x 493 x 530480 x 608 x 1415680 x 608 x 1415790 x 608 x 14152 deparments, 480 x 608 x 1415 each480 x 608 x 14152 deparments, 480 x 608 x 1415 each

400 x 630 x 665600 x 700 x 810950 x 725 x 810720 x 885 x 2089920 x 885 x 20891030 x 885 x 20891492 x 885 x 2089720 x 885 x 20891492 x 885 x 2089

5580

100183215354376208426

-40...-90-40...-86-40...-86-40...-86-40...-86-40...-86-40...-86-40...-90-40...-90

111111111

6.264 0669.699 3109.699 3119.699 3126.263 9209.699 3149.699 3159.699 3189.699 319

30.695,0037.095,0042.295,0054.295,0068.195,0085.595,0092.295,0069.795,00

125.995,00

27.090,0032.500,0037.420,0048.020,0059.870,0071.760,0081.670,0061.770,00

111.495,00

*Dual Cooling System: Increased safety due to 2 separate cooling systems.

9.699 310 9.699 311

9.699 312

9.699 314

9.699 315

14

Freezers and ULT-Freezers


The DP-80 ensures direct access to your samples at your desk. Transport yourprobes at -80°C e.g. with a car.- Portable Freezer up to -80°C- Stirling technology, no compressor, no refrigerant- Temp. stability ±0.2°C- Power connection 12V or 230V- Max volume one aluminium block (please order separately)- Can only be used with aluminium block (6.265 273, 6.265 274, 6.265 275,

6.265 276)

Temperature range: 0°C to -80°CDimensions exterior (WxDxH ) 230 x 262 x 390mmPower supply: 12/100 - 240 V 50/60 HzWeight: 10 kg


DKK DKKDP-80 Cryo Porter 1 6.262 040 32.395,00 28.610,00

Type Capacity External dimensions(W x D x H)

Internal dimensions(W x D x H)

Energy consumption

Temp.range


l mm mm kWh (24h) max. °C DKK DKKLKexv 3910LKUexv 1610LGex 3410LGUex 1500LCexv 4010 fridgefreezer

360141310139

254/107

600 x 615 x 1840600 x 615 x 820600 x 615 x 1840600 x 615 x 820600 x 615 x 2000

440 x 435 x 1635440 x 435 x 670420 x 400 x 1587454 x 450 x 663440 x 435 x 1105431 x 435 x 597

0,8650,8631,3090,9261,8

+3 ... +16+3 ... + 16-9 ... -30-9 ... -16+3 ... +16-9 ... -30

11111

9.698 6859.698 6829.698 6919.698 6909.698 677

13.695,009.995,00

13.895,0010.395,0017.295,00

11.510,008.435,00

12.020,008.755,00

14.580,00

9.698 685

9.698 682

15

Spark-free laboratory refrigerators and freezers LKexv/LKUexv/LGex/LGUex/LCexv with Comfort electronic controller

The range of laboratory appliances with Comfort electronic controllerscomprises two refrigerators, two freezers and one frigde-freezer combinationwith spark-free interior, especially for storing explosive and highly flammablesubstances - for instance in the chemical industry or in special laboratories. Theinteriors of the appliances are in compliance with the safety requirements of theEU Directive 94/9/EC (ATEX 95) and have been tested by electro-suisse SEV,the ATEX conformity evaluation organisation.

- Dynamic cooling system (refrigerators), static cooling system (freezers)- Precision electronic controller with digital temperature display- Flexible, height-adjustable glass shelves- Convenient, clear view drawers (freezers)- Self-closing door with integrated lock

- Visual and audible temperature and door alarm- Visual power failure alarm when main power returns- Integrated data memory with min/max temperatures- Volt-free contact for alarm forwarding to an external remote warning system- RS 485 interface enabling external documentation- Access port for an external temperature sensor- Maximum temperature stability and consistency according to IEC 60068-3

Portable freezer DP-80 CRYO PORTER, up to -80°C

Optics


- Hand held magnifier with magnification of3X and 5X (depending of the viewlocation)

- Ergonomic handle design- Aspherical lens provides spherical

aberration and distortion free images withedge-to-edge sharpness.

- LED bulb with on/off control.- Adjustable angle of illumination.


DKK DKK3X / 5X magnification 1 6.267 407 225,00 123,00

- Observation Tube Binocular 45° -/Phototube 30°, 360° rotating

- Wide field eyepieces WF10X/20mm- Quadruple revolving nosepiece- Achromatic Super Contrast objectives ASC

4X, 10X, 40X S, 100X S-Oil- Coaxial coarse and fine focusing system

with tension adjustment- Built in lowposition coaxial mechanical stage- Focusable 1.25 N.A. Abbe condenser with

iris diaphragm and filter holder- Halogen illumination 12V/20W with intensity

control- Power supply 100V-240V (CE)- Blue, yellow and green filters, dust cover

and immersion oil


DKK DKKB1-220ASC 1 9.727 002 4.395,00 3.895,00

Hand tally counter


DKK DKKHand tally counter 1 6.237 971 125,00 63,50

Length Form PK Cat. No. Price Now

mm DKK DKK115130145115130145

CurvedCurvedCurvedStraightStraightStraight

111111

9.160 3869.160 3879.160 3889.160 3919.160 3929.160 393

41,5044,5046,0040,5043,5044,50

24,0025,5026,5023,0025,0025,50

For measurement of various high concentration samples such as jam,marmalade, jelly, honey, concentrated juice or acidity and salinity. IngressProtection class IP 65 means that they can be cleaned under running water.Easily calibrated since "zero-setting" (calibration) is achieved using water.Temperature measurement with Automatic Temperature Compensation.

SpecificationsResolution: Brix 0.1%Measurement accuracy: Brix ±0.2%Ambient operating temperature: 10 to 40°CIngress protection class: IP65

dust- and waterproofPower supply: 2 x AAA Batteries (incl.)Dimensions: 55 x 31 x 109mmWeight: 100g

Type Measuringrange

Temp.range


°C DKK DKKPAL-1PAL-RIPAL-BX/RI

0.0 - 53.0 Brix1.3306 - 1.5284nD0.0 - 93.0 Brix, 1.3306 - 1.5284nD

10 - 1005 - 45Brix: 10 - 100, nD: 5 - 45

111

9.801 3759.801 3836.231 591

2.295,003.520,006.845,00

1.705,002.625,005.105,00

9.801 375

16

Use for counting blood cells, bacterial colonies,drops of liquid or any repetitive event. Tallies upto 9999. Features a quick-reset knob, lenswindow for easy reading, and finger ring for asecure grip. Sturdy, chrome-finished, metalhousing.Dimensions: 46mm diameter x 41mm W.

Binocular Microscopes for Schools/Laboratories, B1-220ASC

Proven and reliable - Ideal for schools and laboratories

Handheld magnifier with illumination

Ergonomic handheldmagnifier with illumination

L A B W A R E

®

LLG-Cover glass forceps, type Kühne,stainless steel

Stainless steel 4301

Digital Hand-held Pocket RefractometerPAL series


DKK DKKuniSPEC 2, with EU-plug 1 6.263 610 18.595,00 13.240,00

Optics


Certified stabilized Sucrose (Brix) Standards.- Test results are ISO17025 accredited with an uncertainty of measurement of0.11% for all Brix values

- Nominal Refractive Index values are taken from the ICUMSA published tables- The Brix value of the standard is verified using a high performance

calibrated, temperature controlled refractometer- Can be used with any brand of Refractometer- Extended shelf life of 1 year- Convenient high quality dropper bottle

Brix Refractive Indexat 20 °C


% DKK DKK0510152030405060

1.3329861.3402641.3478241.3556791.3638421.3811491.3998601.4200871.441928

111111111

6.264 2126.265 8766.257 9236.263 2606.264 8896.258 3687.660 4086.258 3696.265 875

565,00565,00565,00575,00565,00575,00565,00575,00565,00

302,00302,00302,00302,00302,00302,00302,00302,00302,00

Certified standards with values expressed in Refractive Index (R.I) units nD.- Test results are ISO17025 accredited with an uncertainty of measurement upto ±0.00014 nD units for all Refractive Index values.

- Nominal Refractive Index values are taken from the ICUMSA publishedtables.

- Extended shelf life of 1 year.- Can be used with any brand of Refractometer.- Convenient high quality dropper bottle.

Refractive Indexat 20 °C


DKK DKK1.343251.347821.372331.381151.390321.409781.420091.44193

11111111

6.265 8777.658 8776.265 8786.258 3756.265 8796.265 1426.258 3766.265 880

565,00565,00565,00565,00565,00565,00565,00565,00

302,00302,00302,00302,00302,00302,00302,00302,00

uniSPEC 2 is an inexpensive, basic UV/VIS-spectrophotometer suitable forpharmaceutical, biochemical and clinical lab applications as well as routinemeasurements such as kinetics, wavelength scans, quantitative analysis,multi-wavelength and DNA/Protein analysis. It is possible to store and save200 calibration curves. Both lamps can be individually turned on/off to extendthe durability. A pre-adjusted lamp design allows a fast and easy lampreplacement. 3 years warranty.

Supplied with: Photometer, manual, 4 glass cells and 2 quartz cells.

17

Sucrose (Brix) Standards LLG Spectrophotometer uniSPEC 2

L A B W A R E

®

Refractive Index standards

SpecificationsOptical system: Single beam,

Grating 1200 lines/mm, Silicium photodiode detector

Wavelength range: 190 to 1100nmBandwidth: 2nmWavelength accuracy: ±0.5nmWavelength repeatability: 0.3nmWavelength setting: automaticPhotometric accuracy: ±0.5%TPhotometric repeatability: 0.3%TPhotometric range: -0.3-3A, 0-200%T, 0-9999CStability: ±0.002A/h at 500nmStray light: ≤0.1%TData output: USB portPrinter port parallel portDisplay: 128 x 64 Dots LCDStandard cell holder: 4-position 10 mm cell changerLamps: D2 lamp and W lampDimension (WxDxH): 460 x 360 x 225mmWeight: 18kgPower supply: 220V/50Hz or 110V/60HzWarranty: 3 years

Life science


Compact Incubator Heratherm™

The most compact unit of the Heratherm™ microbiological incubator family hasan 18L capacity, ideal for personalized workspace.- Minimal footprint for space restricted lab areas- Temperatures at or below ambient- High temperature accuracy- Internal light facilitates sample observartion

Temperature deviation at 37°C (over time):Footprint: 0.12m²Chamber volume: approx. 18lDimensions chamber (W x H x D): 180 x 310 x 290mmDimensions, external (W x H x D): 260 x 415 x 470mmNumber of shelves: 2 (incl. in delivery)/max. 3Max. shelf load: 2kgPower supply/max. current: 45W/0.45 - 0.85AWeight: 7.2kg


DKK DKKCompact Incubator Heratherm™Additonal shelf

11

4.009 1904.009 256

5.695,00275,00

4.510,00219,00

Serological pipettes from LLG are ideally suited for sterile serological and cellculture applications. Easy to read graduation scales, facilitate volumemeasurement and dosing. All LLG serological pipettes are plugged, sterile,non-pyrogenic and have an increased volume capacity through extragraduations.LLG Serological pipettes are available in 3 versions with different features.

Type 1:- Also available as short-pipettes (5 ml, 10 ml and 25 ml) or wide-mouth

pipette (10 ml)- 1 ml, 5 ml, 10 ml, 25 ml and 50 ml pipettes contain a bi-directional

secondary graduation scale for precise dosing- Colour coded ringmark for easy volume identification- Single packed in easy-to-open plastic/paper packaging

Type 2- Single-piece pipette-bodies (except 50 ml pipette)- 5 ml, 10 ml, 25 ml and 50 ml pipettes contain a bi-directional secondary

graduation scale for precise dosing- Colour coded plug for easy volume identification- Single packed in easy-to-open plastic/paper packaging

Type 3:- Especially suited for use in clean rooms- Colour coded for easy volume identification- Single packed in easy-to-open plastic/paper packaging

Type Volume Grad. Colour code Negativegraduations


ml ml up to DKK DKK11111

111

1

1

222222333333

1251010

25505

10

25

125102550125102550

1/1001/501/101/101/10

2/105/101/10

2/10

5/10

1/1001/501/101/102/105/100.010.010.10.10.20.5

yellowgreenblueorangeorange (wide mouth)redpurpleblue (short form)orange (short form)red (short form)yellowgreenblueorangeredpurpleclearclearblueorangeredpurple

0,30,6333

8103

10

9

0.30.433290.30.32.03.010.010.0

500500200200200

150100200

150

100

500500250200100100

10001000200500200200

9.380 4409.380 4417.930 4016.268 2409.380 442

7.930 4039.380 4436.265 881

6.265 882

6.265 883

6.266 9956.266 9966.266 9976.266 9986.266 9996.267 1006.268 0996.268 1006.268 1016.268 1026.268 1036.268 104

655,00805,00445,00385,00475,00

665,00835,00515,00

515,00

445,00

415,00425,00355,00305,00375,00

1.020,001.120,001.145,00

425,001.095,00

905,001.245,00

375,00463,00257,00250,00288,00

378,00478,00329,00

329,00

288,00

294,00301,00257,00219,00272,00716,00567,00581,00258,00695,00454,00892,00

type 1

type 2

typ 3

18

L A B W A R E

®

LLG-Serological pipettes, PS, sterile

SpecificationsTemperature range: 17 to 40°CConvection technology: Mechanical convectionTemperature deviation at 37°C (spatial): ±1.2°C

±0.2°C

The portable piston pump uniVACUUPUMP 1 has been developed for lowvacuum applications in the laboratory, in particular in the field of Life Science.Typical applications for this low-cost vacuum pump are the single funnelfiltration of aqueous and buffered solutions, SPE, as well as any applicationswhere no harmful gases are conveyed. The uniVACUUPUMP 1 operates oil-freeand can also be used as a compressor to a pressure up to 3.3 bar. This allowsyou, for example, pressure filtration, if vacuum filtration is not sufficient.Not recommended for pumping organic, acidic, or basic vapours.

Advantages- Dry-running technology for physical applications- Can be used as a vacuum pump and compressor- Cost-effective alternative for water pumps- Sound suppressor for quiet operation- Compact, lightweight and portable- 3 Years warranty.

Scope of delivery: Pump, incl. 2 hose clamps, EU + UK plug power cord.

SpecificationsPump speed 50/60 Hz at atmosphericpressure: 9.2 l/minFinal pressure: 292 mbarOverpressure, max.: 3.3 barSuction/pressure connection: hose nozzle DN 6 for hose inner

diameter 6 mmAmbient temperature: + 10 to + 40°CMax. Operating gas temperature: + 60°CNoise DIN EN ISO 2151: dB (A) ≤ 45Voltage/frequency: 230 V/50 HzMotor power: 25 WProtection DIN EN 60529: IP 20Weight: 2.0 kgDimensions (W/D/H): 194x114x191 mm


DKK DKKLLG-uniVACUUPUMP 1 1 6.263 580 1.995,00 1.730,00

Pumps


The Legato® series syringe pumps provide the smoothest, most accurate flowavailable. These innovative syringe pumps offer unparalleled ease of usethrough the high resolution touch screen user interface. The intuitive touchscreen enables the user to quickly create configurations and recall them forease of use.All of the pump operating parameters are presented to the user on an easy toview run screen. Single syringe, single remote syringe, dual syringe andmultirack configurations are available along with the infuse only orinfuse/withdraw/continuous operation (model dependent).- Single and dual syringe infuse, infuse withdraw & continuous models- Holds syringe sizes from 0.5ul to 140 ml (Model dependent)- High resolution, chemically resistant colour touch screen display- Flow rates down to the picoliter/min (Model dependent)- Built in syringe selection table- Programmable interface without the need for a PC (Model dependent)- USB/RS-232/TTL Interfaces for external control (RS232 available on Legato®

200 Series Only)- Rugged construction with cold rolled steel chassis- Integrated spill dam

Applications: Electrospinning, Flow Cytometry, Microfluidics, Mass Spec, Drug Discovery, Organic Synthesis, Nanofluidics, Stereotaxic Injections

Legato® 100 Single Syringe Infusion PumpAccommodates 1 syringe from 0.5ìl to 60ml. Entry level pump in the Legato®

series. This pump is ideal for applications where a single syringe is used. It allows a wide flow range from 1.26pl/min up to 88.28ml/min.

Legato® 101 Dual Syringe Nanoliter PumpAccommodates 2 syringes from 0.5ìl to 10ml. This infusion only pump is idealfor surface plasma resonance, organic synthesis and other applications wheredual syringes are required with small volumes under 10ml. The Minimum flowrate 1.26pl/min for a 0.5ìl syringe up to 25.99ml/min.

Description Dimensions(W x D x H)

Weight PK Cat. No. Price Now

mm kg DKK DKKLegato® 100Legato® 101

226 x 191 x 150226 x 191 x 150

2.72.7

11

6.267 7066.267 707

13.395,0015.795,00

9.415,0011.100,00

6.267 707

19

Syringe pumps Legato® LLG-uniVACUUPUMP 1

L A B W A R E

®


These cell culture flasks with treated surfaces for the cultivation of adherentcells are available with different growth areas from 12.5 to 182 cm². Available with vented or plug-seal caps made from polyethylene. Vented capscontain a 0.22 µm hydrophobic filter to allow gas exchange and minimize riskof cross-contamination. Plug Seal caps can be used in closed systems,providing a liquid and gas sheer seal, but by simply unscrewing the cap onequarter of a turn, this cap can also be used in an open system.

Features- Innovative angled neck design offers good pipette and cell scraper access- Upper triangular and wider base shape provides stability- Protruding ridge on the back side of the flask enables easy stacking- Special writing area near the neck- Engraved graduation on both flask sides- Sterilized by gamma irradiation- Non-pyrogenic

Material: Polystyrene

Culturesurface

Workingvolume

Cover type Neck thread PK Cat. No. Price Now

cm² ml mm DKK DKK12.512.525.025.075.075.0182.0182.0

202040407575

400400

standardventedstandardventedstandardventedstandardvented

4545454545454545

101010105555

6.267 1726.267 1736.267 1746.267 1756.267 1766.267 1776.267 1786.267 179

52,5063,5044,0054,0046,0053,5070,0078,00

30,5036,5031,5039,0036,5042,5060,5067,50

These standard surface treated cell culture plates for the cultivation ofadherent cells exhibit a reduced evaporation due to raised well rims anduniform rings on the lids.

Features- Available with 6-, 12-, 24-, 48- or 96-wells (lid included)- Flat well bottom- 96-well plate also available as round bottom plate (6.267 171)- Single position lid reduces the risks of cross-contaminations- Wells are labeled with alphanumeric code for easy identification- Sterilized by gamma irradiation- Non-pyrogenic

Material: Polystyreneno. ofwells

Culturesurface

Workingvolume


cm² ml DKK DKK61224489696

10.004.202.000.850.380.38

17.006.803.501.550.390.32

100100100100100100

6.267 1666.267 1676.267 1686.267 1696.267 1706.267 171

935,00975,00

1.020,00985,00835,00

1.095,00

697,00725,00725,00781,00697,00864,00

Cell strainers are especially suited for the generation of homogenous single cellsuspensions from tissue or primary cell lysates

- Available in 3 mesh sizes, 40 µm: 70 µm, and 100 µm- Colour coded mesh size- Designed to fit into 50 ml tubes- Individually packaged- Handle and mantle surface for improved aseptic handling- Nylon mesh- Non-pyrogenic

Mesh size

Colour code PK Cat. No. Price Now

µm DKK DKK4070100

bluewhiteyellow

505050

6.268 0936.268 0926.268 091

595,00595,00595,00

524,00524,00524,00

LLG-vacuum manifold, stainless steel

Multi-branch vacuum manifolds ideal for microbiological monitors andanalytical funnels. These space-saving 3- or 6-place manifolds have specificallybeen designed for operators working in laminar flow hoods. Each manifoldposition is equipped with a large and easy to operate 2-way valve. The tubingto the vacuum source can be connected to either side of the manifold. A unique system has been incorporated to ensure the stability of the manifoldon non-flat working areas. The stainless steel base can be autoclaved; valvesand adaptor tubing cannot be autoclaved.The system includes stainless steel manifold with valves and tubing adaptorfor microbiological monitors, analytical funnels and no. 8 stoppers.


DKK DKK3-place stainless steel manifold6-place stainless steel manifold

11

6.269 1186.269 119

8.195,0013.995,00

7.110,0012.100,00

6.269 118

Cell culture

20

Cell culture flasks, treated, PS, sterile

L A B W A R E

®

LLG-Cell strainers, Nylon, sterile

L A B W A R E

®

Cell Culture Plates, treated, PS, sterile

Capacity Diam. Poresize

ColourFilter / Grid


ml mm µm DKK DKK100100100100100100

474747474747

0.450.450.200.200.450.45

white / blackwhite / black*white / blackwhite / black*black / whiteblack / white*

505050505050

6.268 1766.268 1776.268 1786.268 1816.268 1796.268 180

805,001.170,00

805,001.170,00

805,001.170,00

702,001.030,00

702,001.030,00

702,001.030,00

*single packed

Microbiology - Filtration


Capacity Diam. Poresize

ColourFilter / Grid


ml mm µm DKK DKK100100100100100100100100

5656565647474747

0.450.450.800.200.450.450.450.80

white / blackblack / whiteblack / whitewhite / blackwhite / blackwhite / black*black / whiteblack / white

5050505050505050

6.268 1826.268 1836.268 1846.268 1856.268 1866.268 1876.268 1886.268 189

805,00805,00805,00805,00805,00

1.170,00805,00805,00

702,00702,00702,00702,00702,00

1.030,00702,00702,00

*single packed

LLG-Quantitative filter paper, circles

Slow, pore size 2 to 3µm.- for very fine precipitates and small particles- for soil analysis- for BaSO4 (hot precipitate), PbSO4, Cu2O, ZnS, NiS- ashless, equivalent blue tape

Diam. Filtrationtime


mm secs. DKK DKK7090110125150185

180180180180180180

100100100100100100

7.970 2719.045 8506.242 6709.045 8519.045 8526.242 669

59,0084,00

115,00145,00205,00285,00

34,0048,0067,5084,00

116,00164,00



mm secs. DKK DKK90110125150185200

202020202020

100100100100100100

7.970 0577.970 0007.970 0587.970 0017.970 0026.242 179

74,5095,00

125,00175,00245,00425,00

48,0067,5084,00

116,00164,00276,00



mm secs. DKK DKK557090110125150185240

5050505050505050

100100100100100100100100

6.256 4377.970 5717.970 0326.242 7487.970 0456.252 7656.242 7477.970 591

43,0052,0074,00

105,00125,00175,00255,00505,00

28,0034,0048,0067,5084,00

116,00164,00329,00

Fast, pore size 12 to 15µm.- for coarse, high volume precipitates- for determinations according to the German Standard Methods for the

examination of water, waste water and sludge.- for Fe(OH)2, Al(OH)3, NaSO4

- ashless, equivalent black tape



mm secs. DKK DKK7090110125150185

101010101010

100100100100100100

9.045 8409.045 8419.045 8429.045 8439.045 8449.045 845

59,0084,00

115,00145,00205,00285,00

34,0048,0067,5084,00

116,00164,00

21

LLG-Analytical funnels, sterile

LLG-Microbiological Monitors, sterile

Extendend Range of Products Available

L A B W A R E

®

Medium fast/fast, pore size 8 to 12µm.- for PbS, Ag2S, FeS, carbonates- ashless, equivalent white tape

Medium fast, pore size 5 to 8µm.- for NH4MgPO4, CaC2O4, BaSO4

- ashless, equivalent red tape

L A B W A R E

®

LLG-Microbiological Monitors and Analytical funnels provide a ready-to-usesolution for the filtration of liquid samples using a manifold. No need forflaming or sterilization, reduces the testing time up to 70%. These 100ml unitsare suited for monitoring contaminants in all types of samples, from rawmaterials to finished products.

In the case of Microbiological Monitors the nitrocellulose membrane is fixed tothe unit. The filtration unit easily converts to a Petri dish, which can be labeledand incubated for further analysis.When using analytical funnels the nitrocellulose membrane can be removedand transferred to a Petri dish for further analysis.

Adapter for use with a manifold is included.

LLG-Microbiological Monitors and Analytical Funnels

LLG Labware Instruments


SpecificationsMax. RCF:Max. speed:Max. load: 6 x 0.5/1.5/2ml or 2 x 8-tube PCR strips

(0.2ml)Dimensions (diam. x H): 140 x 120mmWeight: 0.7kgPower supply: 100 - 240V, 50/60Hz, 1AWarranty: 3 yearsDescription PK Cat. No. Price Now

DKK DKKuniCFUGE 2 with EU-pluguniCFUGE 2 with UK-plug

11

6.263 5106.263 511

1.195,001.195,00

895,00895,00

LLG centrifuge uniCFUGE 5 with timer anddigital display

Compact centrifuge with excellent price-performance ratio and a performanceof up to 15,595xg. Microprocessor controlled brushless motor for speeds up to15,000rpm. Operation possible in RPM or RCF mode. Short-spin mode withselectable RZB and RPM values. Fixed angle rotor with lid, made of aluminiumfor 12 x 1.5/2ml tubes with optimised aerodynamics which minimize heatgeneration and noise during use. Large LCD readout with intuitive and user-friendly interface. Integrated imbalance-detection with automatic shutdown.Wide suction feet provide a stable base. The centrifuge can be controlled viacomputer by using the included software that can store up to 99 user-definedprogrammes. Operational record output to Excel. 3 years warranty.

Item consists of:- Centrifuge with rotor (incl. lid) for 12 x 1.5/2ml tubes- Power supply with USB cable- 12 Adapters for 0.4/0.5ml tubes- 12 Adapters for 0.2ml tubes- Allen wrench with T handle- Software CD- User manual

Optional- Rotor (Cat. No. 6.263 535) for 16 x 0.2ml tubes or 2 x 8 PCR-stripes

SpecificationsMax. RCF: 15,595xgMax. speed: variable from 500 up to 15,000rpmAccuracy speed: ±100rpmMotor: brushless DC motorMax. load: 12x2ml PCR tubesDimensions (WxDxH): 262 x 230 x 131mmWeight: 4kgPower supply: 100 - 240V, 50/60HzWarranty: 3 years


DKK DKKuniCFUGE 5 with EU-pluguniCFUGE 5 with UK-plugRotor for 16 x 0,2ml tubes or 2 x 8 PCR-stripes

111

6.263 5306.263 5316.263 535

6.945,006.945,00

895,00

4.995,004.995,00

701,00

Great price on the 15,595 x g

The LLG-uniPLATESHAKER 1 has been designed for accommodating andmixing a single micro plate. Due to its small footprint it can be used in workingareas with limited space such as fume hoods and bio safety cabinets. It canalso be used inside a cold-room. 3-years warranty.

- Digital Display with Speed and Time settings- Variable speed from 300 to 1800rpm- Maintenance free brushless DC motor- Orbital Diameter of 2mm for thorough mixing- Timer setting from 1 to 99min and continuous mode- Universal fit, comes with interchangeable clamps for different micro plate

sizes- Comes with foam attachment for 20 x 1.5/2ml microtubes

SpecificationsType of movement: orbitalOrbital diameter: 2mmSpeed range: 300 to 1800rpmMotor: Brushless DC motorTimer: 1 to 99min, continuousPower consumption: 15 WPermissible ambient temperature: 4 to 40°CDimensions (WxDxH): 127 x 85 x 86mmWeight: 1.4kgPower supply: 100-230V, 50/60HzType PK Cat. No. Price Now

DKK DKKuniPLATESHAKER 1 with EU-pluguniPLATESHAKER 1 with UK-plug

11

6.263 4886.263 489

1.670,001.670,00

1.315,001.315,00

22

LLG mini centrifuge uniCFUGE 2 withuniversal rotor

LLG-Microtitre shaker uniPLATESHAKER 1

Space Saving

L A B W A R E

®

L A B W A R E

®

L A B W A R E

®

1200xg and 2000xg4000rpm and 6000rpm

A compact and cost-effective mini centrifuge witha universal rotor for 6x 1.5/2.0ml, 6x 0.5ml tubesor 2 times 8x 0.2ml PCR-stripes.Speed can be adjusted to 4000rpm or 6000rpm. Powerful motor for fast starting. Quick stop when the lid is opened. 3 years warranty.

Chromatography


Our KIMAX®-HQ NMR tubes are our highest quality NMR tubes and are 100%gauged for wall thickness, concentricity and camber specifications.- High-Quality NMR tubes- Attached polyethylene caps- Sandblasted marking spot- Manufactured from 33 expansion, low extractable borosilicate glass

conforming to USP Type I and ASTM E438, Type I, Class A requirements

External diameterat 3mm: 3.0124 (+0.00/-0.013) mmat 5mm: 4.97 (+0.00/-0.013) mmInner diameterat 3mm: 2.4003 (+0.013/+0.00) mmat 5mm: 4.20 (+0.013/+0.000) mm

Type Diam. Length PK Cat. No. Price Now

mm mm DKK DKK600-700 MHz600-700 MHz900 MHz900 MHz100 MHz300 MHz200 MHz400 MHz500 MHz500 MHz600-800 MHz600-800 MHzNMR Tube Rack

555533333333

178203178203178203178178178203178203

5555555555551

9.400 3179.400 3189.400 3199.400 3209.400 3219.400 3229.400 3239.400 3249.400 3259.400 3269.400 3279.400 3289.301 065

725,00795,00

1.345,001.495,00

465,00495,00495,00495,00555,00615,00645,00715,00685,00

581,00633,00

1.065,001.190,00

371,00399,00399,00399,00443,00490,00513,00570,00375,00

- Barrel: PP, Plunger: PP and Polyisoprene rubber- Luer tip- Smooth flow, tight, high transparency barrel- Latex-free, pyrogen-free, DEHP-free, non-toxic- Non-sterile, bulk packed in box of 500- Defined safety stop to avoid accidental pull-out of plunger

Capacity PK Cat. No. Price Now

ml DKK DKK251020

500500500500

6.267 2676.267 2686.267 2696.267 270

285,00315,00495,00725,00

136,00162,00235,00370,00

This is a rather hydrophilic membrane;it is recommended for filtration ofaqueous and organic/aqueous mediumpolar liquids.Excellent chemical compatibility withesters, bases and alcohols.

Filter diam. Poresize

Housing Type PK Cat. No. Price Now

mm µm DKK DKK13132525

0.200.450.200.45

PPPPPPPP

non sterilenon sterilenon sterilenon sterile

500500500500

9.055 5209.055 5229.055 5219.055 523

3.070,003.070,003.070,003.070,00

2.420,002.420,001.950,001.950,00

LLG Syringe Filter RC, Regenerated celluloseHydrophilic membrane features verylow absorption. It is recommended forfiltration of aqueous andorganic/aqueous liquids.For filtration of polar and medium polarliquids.




0.200.450.200.45

PPPPPPPP


500500500500

9.055 5309.055 5329.055 5319.055 533

3.920,003.920,004.145,004.145,00

3.090,003.090,002.955,002.955,00

LLG Syringe Filter PTFE,PolytetrafluorethyleneHydrophobic membrane. Ideal forfiltration of non-polar liquids andgases.It is very resistant to various solventsas well as acids and bases.




0.200.450.200.45

PPPPPPPP


500500500500

7.970 4027.970 3859.055 5356.255 331

2.770,002.770,002.770,002.770,00

2.535,002.535,002.150,002.150,00

23

NMR tubes, 3 and 5mm, borosilicate glass 3.3, KIMAX®-HQ LLG Syringe Filter NY, Nylon/Polyamide

L A B W A R E

®

L A B W A R E

®

L A B W A R E

®L A B W A R E

®

LLG-Disposable syringes, 3-parts, PP

Description Measuringrange


DKK DKKBASIC-KIT 3-in-1ALL-IN-KIT

View a full range of available test methods on www.primelab.org 11

6.268 0246.268 025

3.895,007.995,00

3.395,006.935,00

Over 100 Test Methods withjust 1 device!

Photometers PrimeLab 1.0

Made in Germany

The new PrimeLab 1.0 photometer is the first and only photometer using justone LED and one (JENCOLOR) sensor, simultaneously covering 400 wavelengthsin one go. The JENCOLOR sensor allows self-calibration of the unit in seconds.More than 100 test methods are available on the PrimeLab 1.0 to be individuallyselected when device is purchased. Even after purchase, not chosen parameterscan be activated afterwards by entering a code. Step-by-step guidance througheach test method in 4 different languages (7 languages when using the App) isdisplayed on the screen. User can choose to either use tablet, liquid or powderreagents.Wireless Bluetooth technology combined with powerful PC-software (PrimeLabDesktop Assistant) and App for Android, iOS and Windows with free Cloud-Service, make the PrimeLab a powerful tool for on-spot-testing (battery) andalso for each lab (DC-connected).Each measurement can be connected to an individual "account", identifying thewater source, to always keep track of test results. Users can create and exporttest reports per "account" via software and/or App, where it also can storeindividual water treatment chemicals to create dosage recommendations, basedon test results, account settings (such as water source volume) and individualwater treatment chemicals.Using the PrimeLab adapter for Turbidity (NTU), PTSA and Fluorescein, eventhose parameters can be tested by the PrimeLab whereas user normally needsto purchase a second device. Further info under www.primelab.org

PrimeLab 1.0 Multitest Photometer BASIC-KIT 3-in-1(Chlorine/pH/Chlorine dioxide):PrimeLab 1.0 Multitest Photometer in a black plastic case with foam insert.4 x 24mm/10ml Glass-vials, light shield, stirring rod, 10ml syringe, cleaningbrush, Bluetooth-USB-dongle for non-bluetooth PC, 4 x AAA-batteries, DC-adapter with international plugs, CD-ROM "PrimeLab Desktop Assistant", fullprinted manual.Pre-activated parameters:ID11 - Chlorine (free/combined/total) using DPD tabletsID16 - Chlorine dioxide using DPD tabletsID38 - pH using Phenol Red tabletsReagent tablets to do 50 tests of the above mentioned parameters

PrimeLab 1.0 Multitest Photometer ALL-IN-KIT (all current and futureparameters activated):PrimeLab 1.0 Multitest Photometer in a black plastic case with foam insert.4 x 24mm/10ml Glass-vials, light shield, stirring rod, 10ml syringe, cleaningbrush, filter-kit containg 20ml luer-lock-syringe, filter-adapter as well as 50 filterpapers each of GF/C and 0.45µ, 100ml dilution tube, Bluetooth-USB-dongle fornon-bluetooth PC, 4 x AAA-batteries, DC-adapter with international plugs, CD-ROM "PrimeLab Desktop Assistant", full printed manual,All available parameters are activated on the device. Parameters released in thefuture will be automatically added and activated while performing an updatethrough PC-software or App.

Accessories can be found in the main catalog on page 1128.

SpecificationsOptic: JENCOLOR Multispectral sensor, covering 380-780 nmPower: 4 x AAA batteries/5.0 V DC-adapter with international plugsSize: 180 x 90 x 60 mmWeight: 160gCommunication: Wireless via BluetoothConnection: Free PC software (windows) "PrimeLab Desktop Assistant" and

free Android/iOS/Windows AppTime/date: RTC (real time clock) with dateAuto-off: Set by user (0 - 99 min)Display: LCD (monochrome)Calibration: Auto-calibration function due to JENCOLOR sensorOne-Time-Zero: Intelligent OTZ, based on chosen methodMemory: On device: 20 accounts/100 test results.

Unlimited via software and AppLanguages: English, Spanish, French, German. Software/App: English,

Spanish, French, German, Italian, Russian, ChineseEnvironment: 30-90% RH (not condensating), ca. 5°C-45°CCertification: CE

All prices exclusive VAT or other local taxes. Prices valid until 31.12.2015. E & OE. Due to high demand temporary shortages can occur.

Buch & Holm A/S Tlf: +45 44 54 00 00Marielundvej 39 Fax: +45 44 92 31 00DK‐2730 Herlev Mail: b‐h@buch‐holm.dkDanmark Web: www.buch‐holm.dk

Documents

FOCUS 4 2015 DK