HSS9860 V900R008 HLR Subscriber Data in Huawei Standard Format

[]

HLR Subscriber Data in Huawei Standard Format INTERNAL

2014-12-11

Page 1, total 68 pages

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their

respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between

Huawei and the customer. All or part of the products, services and features described in this

document may not be within the purchase scope or the usage scope. Unless otherwise

specified in the contract, all statements, information, and recommendations in this document

are provided "AS IS" without warranties, guarantees or representations of any kind, either

express or implied.

The information in this document is subject to change without notice. Every effort has been

made in the preparation of this document to ensure accuracy of the contents, but all

statements, information, and recommendations in this document do not constitute a warranty

of any kind, express or implied.

[]


2014-12-11


HLR Subscriber Data in Huawei Standard

Format

1 Basic Subscription

1.1 HLR_INDEX

Format: HLR_INDEX=

Description: a string, with a single value. Value range: 0255.

1.2 IMSI

Format: IMSI=

Description: a string which contains 5 to 16 digits, in a format similar to

TBCD format.

1.3 MSISDN

Format: MSISDN=

Description: a string which contains up to 16 digits, in a format similar to

TBCD format.

1.4 SID

Format: SID=

Description: a string which contains 16 hexadecimal digits.

1.5 IMEISV (Dynamic)

Format: IMEISV=

Description: a string which contains up to 16 digits, in a format similar to

TBCD format.

1.6 CCNDC

Format: CCNDC=

Description: a string of 3 to 5 digits. If MSISDN contains the string, the

parameter can be omitted.

[]


2014-12-11


1.7 CURRENTNAM

Format: CURRENTNAM=

Description: Network access mode of the user, a string, with a single value. Value range:

BOTH /*both MSC and SGSN*/

NONGPRS /*only MSC*/

GPRS /*only SGSN*/

1.8 CAT

Format: CAT=

Description: a string, with a single value. Value range:

UNKNOWN /*unidentified type*/

FRENCH /*sort by user language*/

ENGLISH

GERMAN

RUSSIAN

SPANISH

SPECIAL1

SPECIAL2

SPECIAL3

RESERVE

COMMON /*common user*/

SUPERIOR /*super user*/

DATACALL /*data call*/

TESTCALL /*test call*/

SPARE

PAYPHONE

COIN;

1.9 LOCK

Format: LOCK=

Description: a string, with multiple values. Value range:

LOCKIN: Barring incoming calls of the user

LOCKOUT: Barring outgoing calls of the user

SABOUT: The user applies for barring outgoing calls actively

[]


2014-12-11


SABIN: The user applies for barring incoming calls actively

SGSNLOCK: User PS domain barring (restricting user PS domain roaming)

EPSLOCK: User EPS domain barring (restricting user EPS domain roaming)

NON3GPPLOCK: User Non-3GPP domain barring (restricting user Non-3GPP

domain roaming)

1.10 UPLCSLCK

Format: UPLCSLCK=

Description: a string, with a single value. Value:

YES: Deny location updates for CS domain

NO: Allow location updates for CS domain

1.11 UPLPSLCK

Format: UPLPSLCK=

Description: a string, with a single value. Value:

YES: Deny location updates for PS domain

NO: Allow location updates for PS domain

1.12 TBS

Format: TBS=

Description: Basic service (including telecom services and bearer services) string, with

multiple values. Value range:

/*telecom service*/

TS11: telephony

TS12: emergencyCalls

TS21: shortMessageMT_PP

TS22: shortMessageMO_PP

TS61: facsimileGroup3AndAlterSpeech

TS62: automaticFacsimileGroup3

TS63: facsimileGroup4

ALLPLMNTS: allPLMN_SpecificTS

PLMNTS1: plmn_specficTS_1




[]


2014-12-11







PLMNTSA: plmn_specficTS_A

PLMNTSB: plmn_specficTS_B

PLMNTSC: plmn_specficTS_C

PLMNTSD: plmn_specficTS_D

PLMNTSE: plmn_specficTS_E

PLMNTSF: plmn_specficTS_F

/*bearer service*/

BS21: dataCDA_300bps


BS23: dataCDA_1200_75bps




BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE

BS2G: general_dataCDA

BS31: dataCDS_1200bps




BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE

BS3G: general_dataCDS

BS40: allPadAccessCA_Services

BS41: padAccessCA_300bps


BS43: padAccessCA_1200_75bps


[]


2014-12-11




BS50: allDataPDS_Services

BS51: dataPDS_2400bps



BS61: allAlternateSpeech_DataCDA

BS62: allAlternateSpeech_DataCDS

BS81: allSpeechFollowedByDataCDA

BS82: allSpeechFollowedByDataCDS

1.13 ODBIC

Format: ODBIC=

Description: Incoming call barring decided by the operator, a string, with a single value.

Value range:

BAIC: barring of all incoming call

BICROAM: barring of incoming calls when roaming outside home PLMN country

NONE: (default) no barring

1.14 ODBOC

Format: ODBOC=

Description: Outgoing call barring decided by the operator, a string, with a single value.

Value range:

BAOC: barring of all outgoing calls

BOIC: barring of outgoing international calls

BOICEXHC: barring of outgoing international call s except those direct to the

home PLMN

BOCROAM: OdbOutgoingCallsWhenRoaming


1.15 ODBROAM

Format: ODBROAM=

Description: Roaming barring service decided by the operator, a string, with a single

value. Value range:

ODBOH: baring of roaming when the user roams outside the home PLMN

[]


2014-12-11


ODBOHC: barring of roaming when the user roams outside the home PLMN

country

BROHPLMNCGPRS: baring of GPRS when the user roams outside the home

PLMN country


1.16 ODBPRC

Format: ODBPRC=

Description: barring high-rate entertainment and information calls decided by the

operator, in a single column, with multiple values. Value range:

ENTER: barring of entertainment calls

INFO: barring of information calls


1.17 ODBPLMN

Format: ODBPLMN=

Description: a string, in a single column, with multiple values. Value range: PLMN1,

PLMN2, PLMN3, PLMN4, NONE (default).

1.18 ODBPOS

Format: ODBPOS=-

Description: a string, with a single value, multiple columns, with multiple values. Value

range:

Column 1: value range: NOBPOS, BAPOS, BHPLMNAPROAM,

BALLAPROAM;

Column 2: value range: BOTH, MS, NET

1.19 OBRF

Format: OBRF=


OBRFALL, OBRFIN, OBRFINEXH, OBRFZ, OBRFZEXH

1.20 ODBECT

Format: ODBECT=


ODBAECT: OdbAllECT

ODBCECT: OdbChargeableECT

ODBIECT: OdbInternationalECT

[]


2014-12-11


ODBZECT: OdbInterzonalECT

1.21 ODBDECT

Format: ODBDECT=

Description: a string, with a single value. Value: YES, NO

1.22 ODBMECT

Format: ODBMECT=

Description: a string, with a single value. Value: YES, NO

1.23 ODBPREMSMS

Format: ODBPREMSMS=

Description: whether to bar the PREMSMS, Value: YES, NO

1.24 ODBADULTSMS

Format: ODBADULTSMS=

Description: whether to bar the ADULSMS, Value: YES, NO

1.25 SUBRES

Format: SUBRES=

Description: Restriction type, a string, with a single value. Value range:

ALLPLMN: All_GSM_PLMNS

ONEAFPLMN: OneNationalAndAllForeign_GSM_PLMNS

HPLMN: RegionallyRestricted

RRTEMPLATE: Regional Roaming from RRTPL

Default value: ONEAFPLMN

1.26 VLRLIST

Format: VLRLIST=

Description: A numerical string, with a single value, representing VLR roaming

restriction template

1.27 SGSNLIST

Format: SGSNLIST=

Description: A numerical string, with a single value, representing SGSN roaming

restriction template

1.28 VLR (Dynamic)

Format: VLR=

[]


2014-12-11


Description: VLR number where the user is roaming, a numerical string consisting of

115 digits, with a single value

1.29 MSC (Dynamic)

Format: MSC=

Description: MSC number where the user is roaming, a numerical string consisting of


1.30 SGSN (Dynamic)

Format: SGSN=

Description: SGSN number where the user is roaming, a numerical string consisting of

115 digits, with a single value.

1.31 MTRF (Dynamic)

Format: MTRF=

Description: whether to support the MTRF, Value: YES, NO

1.32 IMSSF_NUM (Dynamic)

Format: IMSSF_NUM=

Description: GT address of IMSSF, a numerical string consisting of 115 digits, with a single value

1.33 VOLTESTATE (Dynamic)

Format: VOLTESTATE=---

Description: with a single value, multiple columns

Column 1: MME capability, value:

1: Yes

0: No

Column 2: S4SGSN capability, value:

1: Yes

0: No

Column 3: RVCC capability, value:

1: Yes

0: No

Column 4: IMS registration, value:

1: Yes

0: No

[]


2014-12-11

Page 10, total 68

pages

1.34 IP_SM_GW_ADD (Dynamic)

Format: IP_SM_GW_ADD=

Description: IP-SM-GW address, a numerical string consisting of 115 digits, with a single value.

1.35 UNRI (Dynamic)

Format: UNRI=

Description: UE not reachable for IP. Value: YES, NO

1.36 UNRR (Dynamic)

Format: UNRR=

Description: Reason why UE is not reachable for IP. Value range: 112 and 100

0: no_paging_response_via_the_MSC

1: IMSI_detached

2: roaming_restriction

3: deregistered_in_the_HLR_for_non_GPRS

4: MS_purged_for_non_GPRS

5: no_paging_response_via_the_SGSN

6: GPRS_detached

7: deregistered_in_the_HLR_for_GPRS

8: MS_purged_for_GPRS

9: Unidentified_subscriber_via_the_MSC

10: Unidentified_subscriber_via_the_SGSN

11: deregistered_in_the_HSS_HLR_for_IMS

12: no_response_via_the_IP_SM_GW

100: invalid

1.37 URRP_MME (Dynamic)

Format: URRP_MME=

Description: Whether the UE is reachable for IP on the MME. Value range:

REACHABLE, NOT_REACHABLE

1.38 URRP_SGSN (Dynamic)

Format: URRP_SGSN=

[]


2014-12-11


Description: Whether the UE is reachable for IP on the SGSN. Value range:

REACHABLE, NOT_REACHABLE

1.39 ODBSS

Format: ODBSS=

Description: Barring of supplementary services decided by the operator, a string, with a

single value. Value:

YES: barring of the supplementary service of the user

NO: no barring

1.40 SMDP

Format: SMDP=

Description: short message deliver path, a string, with a single value. Value:

MSC: transfer short messages from the MSC preferentially

SGSN: transfer short messages from the SGSN preferentially

1.41 NAEA

Format: NAEA=

Description: access code of equal access, a string consisting of 4 hexadecimal digits,

with a single value

1.42 NLR

Format: NLR=

Description: number migration, with a single value. Value range:

GSM: The number is migrated only in the CS domain.

GPRS: The number is migrated only in the PS domain.

BOTH: The number is migrated in both domains.

1.43 VVDN

Format: VVDN=

Description: voice/video double number service, a string, with a single value. Value:

YES, NO

1.44 DEFCALL

Format: DEFCALL=

Description: default call (including telecom service and bearer service) string, with a

single value. Value range:

/*telecom service*/

[]


2014-12-11

Page 12, total 68

pages

TS11: telephony

TS12: emergencyCalls

TS21: shortMessageMT_PP

TS22: shortMessageMO_PP

TS61: facsimileGroup3AndAlterSpeech

TS62: automaticFacsimileGroup3

TS63: facsimileGroup4

TSD1: AUXILIARY TELEPHONY

/*bearer service*/



BS23: dataCDA_1200_75bps




BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE

BS2G: general_dataCDA





BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE

BS3G: general_dataCDS



BS43: padAccessCA_1200_75bps







[]


2014-12-11

Page 13, total 68

pages

BS61: allAlternateSpeech_DataCDA

BS62: allAlternateSpeech_DataCDS

BS81: allSpeechFollowedByDataCDA

BS82: allSpeechFollowedByDataCDS

1.45 RBTINDEX

Format: RBTINDEX=

Description: CRBT selection code, with a single value. Value range: 0254

1.46 IST_ALERT_TIMER

Format: IST_ALERT_TIMER=

Description: IST alert timer, with a single value. Value range: 0255

1.47 IST_ALERT_RESPONSE

Format: IST_ALERT_RESPONSE=

Description: IST alert response, with a single value. Value range: 04

1.48 UPL_TIME (Dynamic)

Format: UPL_TIME=

Description: update location time for CS domain, with a single value. Value range:

09999999999

1.49 PURGE_TIME_ATMSC (Dynamic)

Format: PURGE_TIME_ATMSC=

Description: purge time for CS domain, with a single value. Value range: 09999999999

1.50 GPRSUPL_TIME (Dynamic)

Format: GPRSUPL_TIME=

Description: update location time for PS domain, with a single value. Value range:

09999999999

1.51 PURGE_TIME_ATSGSN (Dynamic)

Format: PURGE_TIME_ATSGSN=

Description: purge time for PS domain, with a single value. Value range: 09999999999

1.52 SUB_AGE

Format: SUB_AGE=

Description: service age indicator, with a single value. Value range: 016777215

[]


2014-12-11

Page 14, total 68

pages

1.53 CATEGORYROUTE

Format: CATEGORYROUTE=

Description: route category, with a single value. Value range: 1255

1.54 ACR

Format: ACR=

Description: auto call redirect, with a single value. Value range: 0255

1.55 NRBT_INDEX

Format: NRBT_INDEX=

Description: NRBT index, with a single value. Value range: 165535

1.56 ACR_STATUS

Format: ACR_STATUS=

Description: ACR provision flag, with a single value. Value range: 02

1.57 STANDBY_IMSI

Format: STANDBY_IMSI=

Description: a string which contains 16 digits, in a format similar to TBCD.

1.58 EXPIRY_DATE

Format: EXPIRY_DATE=

Description: expiry Date, with a single value. Value range: 09999999999

1.59 MCSISTATE

Format: MCSISTATE=

Description: M_CSI state, a string, with a single value. Value: YES, NO

1.60 OCSISTATE

Format: OCSISTATE=

Description: O_CSI state, a string, with a single value. Value: YES, NO

1.61 TCSISTATE

Format: TCSISTATE=

Description: T_CSI state, a string, with a single value. Value: YES, NO

1.62 SMSROUTE(SMSROUTEdata template)

Format: SMSROUTE=

[]


2014-12-11

Page 15, total 68

pages

Description: a numerical string, with a single value. Value range: 065534, SMSROUTE data template for subscription

1.63 EXEXROUTECATEGORY

Format: EXEXROUTECATEGORY=

Description: extended enhanced category service template, with a single value. Value

range: 12147483647

1.64 PROFILE_ID

Format: PROFILE_ID=

Description: subscription identifier, with a single value, a string which contains 3

decimal digits. Default value: 1

1.65 EPS_PROFILE_ID

Format: EPS_PROFILE_ID=

Description: subscription identifier, with a single value, a string which contains 3

decimal digits. Default value: 1

1.66 STNSR

Format: STNSR=

Description: Session Transfer Number for SRVCC. Value range: 315 decimal digits, with a single value

1.67 APNOI

Format: APNOI=

Description: APN operator identifier, with a single value. Value range: a string which

contains 163 digits

Default value#

1.68 TGPPAMBRMAXUL

Format: TGPPAMBRMAXUL=

Description: a numerical string, with a single value. Value range: 14294967295, user's maximum uplink bandwidth

1.69 TGPPAMBRMAXDL

Format: TGPPAMBRMAXDL=

Description: a numerical string, with a single value. Value range: 14294967295, user's maximum downlink bandwidth

1.70 RATFREQSELPRI

Format: RATFREQSELPRI=

[]


2014-12-11

Page 16, total 68

pages

Description: a numerical string, with a single value. Value range: 1256, radio frequency selection priority

1.71 PLMNTPLID

Format: PLMNTPLID=

Description: PLMN roaming restriction template ID, with a single string. Value range:

065534

1.72 DIAMNODETPL_ID

Format: DIAMNODETPL_ID=

Description: 065534 Diameter roaming restriction template ID, with a single string. Value range: 065534

1.73 LTEAUTOPROV

Format: LTEAUTOPROV=

Description: Whether the HSS provides long term evolution (LTE) services

for a subscriber that has not been defined in the EPS.

Value:

TRUE: The HSS provides LTE services for a subscriber that has not been defined in the

EPS, and the HSS notifies the provisioning system of the LTE service provisioning.

FALSE: The HSS does not provide LTE services for a subscriber that has not been

defined in the EPS.

AUTOTPLUSER: The convergent HSS uses a template to provide LTE services for a

subscriber that has not been defined in the EPS.

AUTOUSER_NN: The HSS provides LTE services for a subscriber that has not been

defined in the EPS, but the HSS does not notify the provisioning system of the LTE

service provisioning.

AUTOTPLUSER_NN: The convergent HSS uses a template to provide LTE services for a

subscriber that has not been defined in the EPS, but the HSS does not notify the

provisioning system of the LTE service provisioning.

Default value: FALSE

1.74 MPS

Format: MPS=

Description: Specifies whether the HSS provides the Multimedia Priority Service (MPS)

for a subscriber.

Value:

[]


2014-12-11

Page 17, total 68

pages

TRUE: The HSS provides the MPS for a subscriber.

FALSE: The HSS does not provide the MPS for a subscriber.

Default value: FALSE

1.75 TAUTIMER

Format: TAUTIMER=

Description: Specifies whether the HSS updates the routing areas or tracking areas for

subscribers. Value range: 043200.

The default value 0 indicates that the HSS does not update the routing areas and tracking

areas for subscribers. When the parameter value is changed from a non-zero value to 0, the

HSS sends a DSR message to the MME or S4SGSN.

143200 (in minutes): It indicates the interval at which the HSS updates the routing areas or tracking areas for subscribers.

1.76 SUB_DYN_EPS_ID (Dynamic)

Format: SUB_DYN_EPS_ID=

Description: EPS dynamic subscription identifier, with a single value, which consists of

3 digits.

1.77 MMEHOST (Dynamic)

Format: MMEHOST=

Description: MME host address, a string consisting of 1127 digits, with a single value.

1.78 MMEREALM (Dynamic)

Format: MMEREALM=

Description: MME real domain, a string consisting of 1127 digits, with a single value.

1.79 SGSNHOST (Dynamic)

Format: SGSNHOST=

Description: SGSN host name, a string consisting of 1127 digits, with a single value.

1.80 SGSNREALM (Dynamic)

Format: SGSNREALM=

Description: SGSN real domain, a string consisting of 1127 digits, with a single value.

1.81 S4SGSNNUM (Dynamic)

Format: S4SGSNNUM=

Description: S4SGSN number, a string consisting of 115 digits, with a single value.

[]


2014-12-11

Page 18, total 68

pages

1.82 EPS_IMEI (Dynamic)

Format: EPS_IMEI=

Description: international mobile equipment identifier, a string consisting of 15digits.

1.83 EPS_IMEISV (Dynamic)

Format: EPS_IMEISV=

Description: a string consisting of 12 digits, in a format similar to TBCD.

1.84 MMEFEATURELIST (Dynamic)

Description: multiple columns Value range:

Format: MMEFEATURELIST=---

-----------

----

---

-----

For details about the enumerated values, see Feature-List AVP in section 7.3.10 of TS

29272.

[]


2014-12-11

Page 19, total 68

pages

No. Feature M/

O

Description

0 ODB-all-APN O Operator Determined Barring of all Packet Oriented

Services

1 ODB-HPLMN-APN O Operator Determined Barring of Packet Oriented

Services from access points that are within the HPLMN whilst the subscriber is roaming in a VPLMN

2 ODB-VPLMN-APN O Operator Determined Barring of Packet Oriented

Services from access points that are within the roamed to VPLMN

3 ODB-all-OG Operator Determined Barring of all outgoing calls

4 ODB-all-InternationalOG O Operator Determined Barring of all outgoing

international calls

5 ODB-all-InternationalOGNotToHP

LMN-Country

O Operator Determined Barring of all outgoing

international calls except those directed to the home PLMN country

6 ODB-all-InterzonalOG O Operator Determined Barring of all outgoing inter-zonal

calls

7 ODB-all-InterzonalOGNotToHPL

MN-Country

O Operator Determined Barring of all outgoing inter-zonal

calls except those directed to the home PLMN country

8 ODB-all-InterzonalOGAndInternati

onalOGNotToHPLMN-Country

O Operator Determined Barring of all outgoing

international calls except those directed to the home

PLMN country and Barring of all outgoing inter-zonal calls

9 RegSub O Regional Subscription.

10 Trace O Trace Function

11 LCS-all-PrivExcep O All LCS Privacy Exception Classes

12 LCS-Universal O Allow location by any LCS client

13 LCS-CallSessionRelated O Allow location by any value added LCS client to which a call/session is established from the target UE

14 LCS-CallSessionUnrelated O Allow location by designated external value added LCS

clients

15 LCS-PLMNOperator O Allow location by designated PLMN operator LCS

clients

[]


2014-12-11

Page 20, total 68

pages

16 LCS-ServiceType O Allow location by LCS clients of a designated LCS

service type

17 LCS-all-MOLR-SS O All Mobile Originating Location Request Classes

18 LCS-BasicSelfLocation O Allow an MS to request its own location

19 LCS-AutonomousSelfLocation O Allow an MS to perform self location without

interaction with the PLMN

20 LCS-TransferToThirdParty O Allow an MS to request transfer of its location to

another LCS client

21 SM-MO-PP O Short Message MO-PP

22 Barring-OutgoingCalls O Barring of Outgoing Calls

23 BAOC O Barring of all outgoing calls

24 BOIC O Barring of outgoing international calls

25 BOICExHC O Barring of outgoing international calls except those

directed to the home PLMN Country

26 T-ADS Data Retrieval O Terminating Access Domain Selection Data Retrieval

Feature bit: The order number of the bit within the Supported-Features AVP, for example "1".

Feature: A short name that can be used to refer to the bit and to the feature, for example. "ODB-HPLMN-APN".

M/O: Defines if the implementation of the feature is mandatory ("M") or optional ("O").

Description: A clear textual description of the feature.

1.85 SGSNFEATURELIST (Dynamic)


Format: SGSNFEATURELIST=---

-----------

----

[]


2014-12-11

Page 21, total 68

pages

---

-----

See the following table for description NO.0-NO.26 and all description in 7.3.10

Feature-List AVP in section 1.68 TS 29272.

1.86 MMEULRFLAG (Dynamic)


Format: MMEULRFLAG=--

---

-

Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND

Column 2: S6a or S6d identifier, value: S6AORS6D_IND

Column 3: subscriber data identifier, value: SKIP_SUBDATA

Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND

Column 5: node type identifier, value: NODE_TYPE_IND

Column 6: initial attachment identifier, value: INIT_ATTATCH_IND

Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP

For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.

1.87 SGSNULRFLAG (Dynamic)


Format:

SGSNULRFLAG=------

Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND

Column 2: S6a or S6d identifier, value: S6AORS6D_IND

Column 3: subscriber data identifier, value: SKIP_SUBDATA

Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND

Column 5: node type identifier, value: NODE_TYPE_IND

Column 6: initial attachment identifier, value: INIT_ATTATCH_IND

Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP

For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.

1.88 MMETIMESTAMP (Dynamic)

[]


2014-12-11

Page 22, total 68

pages

Format: MMETIMESTAMP=

Description: MME registration and purge time, with a single value. Value range:

09999999999

1.89 S4SGSNTIMESTAMP (Dynamic)

Format: S4SGSNTIMESTAMP=

Description: S4SGSN registration and purge time, with a single value. Value range:

09999999999

1.90 FWDSUP

Format: FWDSUP=

Description: forwarding suppression. Value: YES, NO

1.91 ZCLOCK

Format: ZCLOCK=

Description: Zone cell lock. Value: YES, NO

1.92 MBRCTRL

Format: MBRCTRL=&

Description:

Column 1: DenyDirectCall: Whether the HSS/HLR restricts the direct calls placed to a

GROUPSIM member. Value:

1: Deny: cannot receive calls

0: Allow: can receive calls

Default value: 0

Column 2: DenySMS: Whether the HSS/HLR restricts the short messages sent to a

GROUPSIM member. Value:

1: Deny: cannot receive short messages

0: Allow: can receive shot massages

Default value: 0

1.93 PNP

Format: PNP=-

Description: PNP provision, multiple columns

Column 1: Whether to provide the PNP service, value: YES,

NO

, PNP provision identifier, value: YES, NO

[]


2014-12-11

Page 23, total 68

pages

Column 2: PNP index, PNP provision identifier, value: 099999

2 Supplementary Services

2.1 CB

Format: CB=--

Description: multiple columns

Column 1: code of supplementary services of the barring types, a string,

with a single value. Value range: BAOC, BOIC, BOICEXHC, BAIC, BICROAM,

BOCROAM

Column 2: basic service (group), a string, with a single value. Value

range:

/*telecom service*/

TS10: allSpeechTransmissionServices, TS11

TS20: allShortMessageServices, TS21, TS22

TS60: allFacsimileTransmissionServices, TS61, TS62, TS63

TS70: allDataTeleservices

TS80: allTeleservices_ExceptSMS

TSD0: allPLMN_SpecificTS, TSD1-TSDF

/*bearer service*/

BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,

BS2F

BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G

BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,

BS4G

BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G

BS60: allAsynchronousServices

BS68: allSynchronousServices

BSD0-BSDF

The value is (default) ALL only in the PROVIDE status: The parameter means

valid services subscribed by all subscribers.

Column 3: supplementary service status, a string, with a single

value. Value range:

PROV: Provide

ACT: ACTIVE_OPERATIVE, activate

QUC: ACTIVE_QUIESCENT, sleep

[]


2014-12-11

Page 24, total 68

pages

Note: PROV is the default value.

2.2 CW

Format: CW=--


Column 1: code of supplementary services of the waiting types, a string,

with a single value. Value: CW

Column 2: basic service (group), a string, with a single value. Value

range:

/*telecom service*/







/*bearer service*/


BS2F



BS4G




BSD0-BSDF

The value is (default) ALL only in the PROVIDE status: The parameter means

valid services subscribed by all subscribers.

Column: supplementary service, a string, with a single value. Value:

PROV: Provide

ACT: ACTIVE_OPERATIVE, activate

Note: PROV is the default value.

2.3 PW

Format: PW=

[]


2014-12-11

Page 25, total 68

pages

Description: a numerical string, consisting of 8digits, with a single value

2.4 CONTROL

Format: CONTROL=

Description: a string, with multiple values. Value range:

OPER: operator

SUB: subscriber

2.5 CONTROLREASON

Format: CONTROLREASON=


OPER: operator

SUB: subscriber

2.6 WPA

Format: WPA=

Description: a numerical string, with a single value.

2.7 CF

Format:

CF=-------------------


Column 1: code of supplementary services of the forwarding type, a

string, with a single value. Value range:

CFU: call forwarding unconditional

CFB: call forwarding on busy

CFNRY: call forwarding on no reply

CFNRC: call forwarding on no reachable

CFD: default forwarding

CFBFTN: CFD replaces CFB forwarded-to number

CFNRYFTN: CFD replaces CFNRy forwarded-to number

CFNRCFTN: CFD replaces CFNRc forwarded-to number

Column 2: basic service code, a string, with a single value. Value

range:

/*telecom service*/

[]


2014-12-11

Page 26, total 68

pages







/*bearer service*/


BS2F



BS4G




BSD0-BSDF

The value is (default) ALL only in the PROVIDE status.

Column 3: supplementary service status, a string, with a single value. Value range:

PROV, REG, ACT, QUC

Note: default value: PROV

Column 4: forwarding number, a numerical string, consisting of 18 digits,

with a single value. The first two digits indicate the number attribute, where 0x81

means an unknown number and 0x91 means an international number.

Column 5: NOTIFICATION TO CALLING SUB a string, with a single

value. Value: YES, (default) NONE.

Column 6: NOTIFICATION TO FORWARDING SUB, a string, with a

single value. Value: YES, NO, (default) NONE.

Column 7: , a numerical string, consisting of 12 digits, with a single value, (default) NONE.

Column 8: , control of user, a string, with a single value. Value: YES, NO

Column 9: , ofa id, a numerical string, with a single value. Value range:

065534

Column 10: , with a single value, and indicating whether the

forwarding number is in the country where the HPLMN is located. Value: YES, NO

Column 11: , with a single value, and indicating whether the

forwarding number is in the country where the VPLMN is located. Value: YES, NO

[]


2014-12-11

Page 27, total 68

pages

Column 12: with a single value, and indicating whether the forwarding

number is an entertainment number. Value: YES, NO

Column 13: with a single value, and indicating whether the forwarding

number is an information station number. Value: YES, NO

Column 14: with a single value, and indicating whether the

forwarding number subscribes to the numbers after TIFCSI. Value: YES, NO

Column 15: with a single value, and indicating whether the CFD replaces

the CFB service. Value: YES, NO

Column 16: with a single value, and indicating whether the CFD

replaces the CFNRY service. Value: YES, NO


replaces the CFNRC service. Value: YES, NO

When values of column 15, column 16 and column 17 are all NO, the CFD can

replace any CCF.


service is delivered when the user roams internationally. Value: YES, NO

Column 19: with a single value, and indicating whether the Ftn

Number is a short Ftn Number. Value: YES, NO

Column 20: with a single value, and indicating whether the Ftn

Number is a voice mail service number.

2.8 DEFOFAID

Format: DEFOFAID=

Description: a numerical string, with a single value, default OFA ID. Value range:

065534

2.9 GS (Other Supplementary services)

Format: GS=


CLIP, CLIR, COLP, COLR, MCI, CNAP, ECT, MAH, HOLD, CCBS_A, CCBS_B,

AOCC, AOCI, MPTY, HOTBILL, CAPL, PLMNSS1, PLMNSS2, PLMNSS3,

PLMNSS4, PLMNSS5, PLMNSS6, PLMNSS7, PLMNSS8, PLMNSS9,

PLMNSSA, PLMNSSB, PLMNSSC, PLMNSSD, PLMNSSE, PLMNSSF,

ALLPLMNSS, CD, ELCS, CPP, ICSIND, ANCHOR.

2.10 CLIRES

Format: CLIRES=

Description: CliRestrictionOption, a string, with a single value. Value range: PERM,

TEMPRES, TEMPALLOW

2.11 CLIPOC

[]


2014-12-11

Page 28, total 68

pages

Format: CLIPOC=

Description: ClipOverrideCategory, a string, with a single value. Value: YES, NO

2.12 COLPOC

Format: COLPOC=

Description: ColpOverrideCategory, a string, with a single value. Value: YES, NO

2.13 CNAPOC

Format: CNAPOC=

Description: CNAPOverrideCategory, a string, with a single value. Value: YES, NO

2.14 LCS

Format: LCS=

Description: LCS template number, a string, with a single value. Value range: 065534

2.15 UUS

Format: UUS=

Description: UUS signaling point value, a sting, with multiple values. Value range:

UUS1: send and receive UUI messages between call origination and call

termination

UUS2: send UUI messages when hearing the ring tone of the opposite party

UUS3: send and receive UUI messages after establishment of communication

2.16 CFSMS

Format:

CFSMS=-------


Column 1: supplementary service status, a string, with a single value. Value range:

PROV, REG, ACT, QUC

Column 2: OFAID with a single value. Value range: 065534

Column 3: forwarding number, consisting of 328 digits, with a single value. The first two digits indicate the number attribute, where 0x81 means an unknown number and

0x91 means an international number.

Column 4: with a single value, and indicating whether the forwarding number is in the

country where the HPLMN is located. Value: YES, NO

Column 5: with a single value, and indicating whether the forwarding number is in the

country where the VPLMN is located. Value: YES, NO

[]


2014-12-11

Page 29, total 68

pages

Column 6: with a single value, and indicating whether the forwarding number is an

entertainment number. Value: YES, NO

Column 7: with a single value, and indicating whether the forwarding number is an

information station number. Value: YES, NO

Column 8: with a single value, and indicating whether the forwarding number is a

mailbox number. Value: YES, NO

2.17 ACC_LENGTH

Format: ACC_LENGTH=

Description: with a single value, ACC length. Value range:

DICR_0: acc length is 0

















DICV: acc length is 127

2.18 CLRBSG

Format: CLRBSG=-----


Column 1: service code. Value range:

CLIP: calling line identification presentation

[]


2014-12-11

Page 30, total 68

pages

CLIR: calling line identification restriction

COLP: connected line identification presentation

COLR: connected line identification restriction

Column 2: TS1X, value: YES, NO



Column 5: BS2X, value: YES, NO

Column 6: BS3X, value: YES, NO

2.19 MC

Format: MC=-


Column 1: Specifying the maximum number of MC (Multi Call) attempts that the HLR

allows, ranging from 2 to 7.

Column 2: Specifying the maximum number of MC attempts that the user determines,

ranging from 1 to 7.

2.20 UEREACH

Format: UEREACH=-


Column 1: Registered with MME. Value:

0: Not registered

1: Registered

Column 2: Registered with SGSN. Value:

0: Not registered

1: Registered

3 Multi-MSISDN

3.1 MMSISDN

Format:

MMSISDN=-----------------------------


[]


2014-12-11

Page 31, total 68

pages

Column 1: secondary MSISDN number, a numerical string, consisting of


Column 2: basic service of bearer capability, a string, with a single value. Value

range: TS11, TS21, TS22, TS61, TS62, TS63, TSD1, BS21, BS22, BS23, BS24, BS25,

BS26, BS2G, BS2F, BS31, BS32, BS33, BS34, BS3G, BS3F, BS41, BS42, BS43, BS44,

BS45, BS46, BS51, BS52, BS53, BS61, BS62, BS81, BS82

Column 3: ITC: Information Transfer Capability, a numerical string, with a single

value. Value range:

1: UDI

2: AUDIO

3: FAX

5: RDI

7: ALTFAX

NONE (default value)

Column 4: RCR: RADIO CHANNEL REQUIREMENT: a numerical string, with a


0: half rate support only MS

1: full rate support only MS

2: dual rates support MS/half rate preferred

3: dual rates support MS/full rate preferred


Column 5: DC: Data compression: a numerical string, with a single value. Value

range:

0: Data compression not possible

1: Data compression possible


Column 6: S: Structure: a numerical string, with a single value. Value range:

0: Service Data Unit integrity

3: Unstructured


Column 7: RA: Rate Adaption: a numerical string, with a single value. Value range:

0: No Rate Adaption

1: V.110, I.460/X.30 Rate Adaption

2: ITU-T X.31 flag stuffing

3: V.120

[]


2014-12-11

Page 32, total 68

pages

4: H.223 and H.245

5: PIAFS


Column 8: SAP: Signaling Access Protocol: a numerical string, with a single value.

Value range:

1: I.440/450

2: X.21

3: X.28-dedicated PAD, individual NUI

4: X.28-dedicated PAD, universal NUI

5: X.28-non dedicated PAD

6: X.32


Column 9: SA: Synchronous/Asynchronous transfer: a numerical string, with a


0: Synchronous

1: Asynchronous


Column 10: NSB: Number of stop bits: a numerical string, with a single value.

Value range:

0: 1 bit

1: 2 bits


Column 11: NDB: Number of data bits: a numerical string, with a single value.

Value range:

0: 7 bits

1: 8 bits


Column 12: UR: User Rate: a numerical string, with a single value. Value range:

1: 300 bit/s

2: 1200 bit/s

3: 2400 bit/s

4: 4800 bit/s

5: 9600 bit/s

[]


2014-12-11

Page 33, total 68

pages

6: 12.0 kbit/s transparent (non compliance with X.1 and V.110)

7: 1.2 kbit/s/75 bit/s Recommendation V.23, (asymmetric) X.1 and V.110.


Column 13: IR: Intermediate Rate: a numerical string, with a single value. Value

range:

2: 8 kbit/s

3: 16 kbit/s


Column 14: NICT: NIC on TX: a numerical string, with a single value. Value

range:

0: does not require sending data with network independent click

1: requires sending data with network independent clock


Column 15: NICR: NIC on RX: a numerical string, with a single value. Value:

0: cannot accept data with network independent clock

1: can accept data with network independent clock


Column 16: NPB: Parity information: a numerical string, with a single value.

Value:

0: Odd

2: Even

3: None (case-sensitive)

4: Forced to 0

5: Forced to 1


Column 17: CE: Connection Element: a numerical string, with a single value.

Value:

0: Transparent

1: Non transparent

2: Both, transparent preferred

3: Both, non transparent preferred


Column 18: MT: Modem Type: a numerical string, with a single value. Value:

[]


2014-12-11

Page 34, total 68

pages

0: None

1: V.21

2: V.22

3: V.22 bis

4: V.23

5: V.26 ter

6: V.32

7: modem for undefined interface

8: Autobauding type 1


Column 19: OMT: Other Modem Type: a numerical string, with a single value.

Value:

0: No other Modem Type

2: V.34


Column 20: FNUR: Fixed network User Rate: a numerical string, with a single

value. Value:

0: Not applicable

1: 9600 bit/s

2: 14400 bit/s

3: 19200 bit/s

4: 28800 bit/s

5: 38400 bit/s

6: 48000 bit/s

7: 56000 bit/s

8: 64000 bit/s

9: 33600 bit/s

10:32000 bit/s

11:31200 bit/s


Column 21: LA2: a numerical string, with a single value. Value:

6: Recommendation X.25, link level

[]


2014-12-11

Page 35, total 68

pages

8: International Organization for Standardization (ISO) 6429, code set 0

(DC1/DC3)

10: videotex profile 1

12: COPNOFLCT (Character oriented protocol with not flow mechanism)

13: X.75 layer 2 modified (CAPI)


Column 22: TM: transfer mode

0: circuit mode

1: packet mode

Column 23: DMODE: duplex mode

0: half duplex

1: full duplex

Column 24: NIRR:

0: No meaning is associated with this value

1: Data up to and including 4.8kb/s, full rate, non-transparent, 6kb/s radio

interface rate is requested

Column 25: ACC: Acceptable channel coding

0: None

1: TCH/F 4.8 acceptable


3: TCH/F 4.8&9.6 acceptable




11: TCH/F 14.4&9.6&4.8 acceptable

Column 26: NOTC: Maximum number of traffic channels

0:1 TCH

1:2 TCH

2:3 TCH

3:4 TCH

4:5 TCH

5:6 TCH

6:7 TCH

[]


2014-12-11

Page 36, total 68

pages

7:8 TCH

Column 27: UIMI:

0: User initiated modification not allowed/required/applicable

1: User initiated modification up to 1 TCH/F allowed/may be requested





Column 28: WAIUR: Wanted air interface user rate

0: air interface user rate not applicable

1:9.6 kbit/s

2:14.4kbit/s

3:19.2kbit/s

5:28.8kbit/s

6:38.4kbit/s

7:43.2kbit/s

8:57.6kbit/s


Column 29: ACCEx: Acceptable channel coding extended

0: None







7: TCH/F 43.2&32.0&28.8 acceptable


Column 30: AI: Asymmetry Indication

0, 3: channel coding symmetry preferred

1: downlink biased channel coding asymmetry is preferred

2: uplink biased channel coding asymmetry is preferred

[]


2014-12-11

Page 37, total 68

pages


3.2 ALS

Format: ALS=

Description: a string consisting of 16 digits, in a format similar to TBCD format.

4 CUG Data 4.1 CUG_SUB

FormatCUG_SUB=---;

Description: CUG subscription data, with multiple columns. Value range

Column 1: InterLock: a numerical string consisting of eight digits, with a single

value. Value range: 0000000099999999

Column 2: cugIndex: a numerical string, with a single value. Value range: 032767

Column 3: IntraCUGOptions: a string, with a single value. Value range:

NOBAR: no CUG barring

ICBAR: barring of CUG incoming calls

OCBAR: barring of CUG outgoing calls

Default value: NOBAR

Column 4: BSGList: basic service group list, a string, with multiple values. Value

range:

ALL: all basic services

/*telecom service*/



/*bearer service*/


BS2F


4.2 CUG_FEA

Format: CUG_FEA=--;

Description: CUG feature data, with multiple columns. Value range:

Column 1: basic service group, with a single value. Value range:

ALL: all basic services

/*telecom service*/

[]


2014-12-11

Page 38, total 68

pages



/*bearer service*/


BS2F


Column 2: CUGIndex: a numerical string, with a single value. Value range:

032767

Column 3: InterCUGRestrictions, a string, with a single value. Value range:

CUG: Only CUG calls are allowed

OA: Inter-group calls are allowed

IA: Inter-group incoming calls are allowed

IOA: Inter-group outgoing calls are allowed

5 CAMEL Data

5.1 NTCSI

Format:

TCSI=-------

-------

Description: with a single value, multiple columns

Column 1: value. Value range:

COLLECTINFO: collect information, DP2 (OCSI)

ROUTESELFAIL: route selection fails, DP4 (OCSI)

TAA: Terminating_Attempt_Authorized, DP12. DP12 trigger list contains up

to 5 kinds of telecommunications computer service interface (TCSI) code.

TBUSY: DP13 (TCSI)

TNOANSWER: DP14 (TCSI)

Column 2: SCPaddress index, E.164 Format address

Column 3: service key, 02147483647

Column 4: default calls processing. Value range:

ContinueCall: continue the call

ReleaseCall: release the call

[]


2014-12-11

Page 39, total 68

pages

Column 5: CAMEL service processing capability. Value range:

PHASE 1, PHASE 2, PHASE 3, PHASE 4

Column 6: VLR_NOTSUPPHASE1: VLR/MSC does not support the CAMEL. Value

range:

0: Allow location updates and calling service

1: Allow location updates but bar all the calling service

2: Deny location updates

Column 7: VLR_SUPLPORNOTSUPPHASE2: VLR/MSC does not support CAMEL

PHASE2. Value range:

0: Use the earlier CAMEL version













Column 10: GMSC_NOTSUPPHASE1: GMSC does not support CAMEL PHASE2.

Value range:

0: Allow the called service

1: Deny all the called service

Column 11: GMSC_SUPLPORNOTSUPPHASE2: GMSC does not support CAMEL









[]


2014-12-11

Page 40, total 68

pages







Column 14: PSICONF: whether the CAMEL user provides subscriber information in

SRI flow. Value: YES, NO

Column 15: CSI application scope:

HPLMN: Return the T-CSI data when the subscriber roams to the HPLMN.

FPLMN: Return the T-CSI data when the subscriber roams outside the HPLMN.

INTERNATIONAL: Return the T-CSI data when the subscriber roams outside

the home country.

HPLMNC: Return the T-CSI data when the subscriber roams within the home

country.

ALL_PLMN: Return the T-CSI data when the subscriber roams to any network.

5.2 OCSI

Format: OCSI=

Description: a numerical string, with a single value. Value range: 099999, OCSI data template for subscription

5.3 TCSI

Format: TCSI=

Description: a numerical string, with a single value. Value range: 099999, TCSI data template for subscription

5.4 GPRSCSI

Format: GPRSCSI=

Description: gprscsi template number, a string, with a single value. Value range:

065534

5.5 SSCSI

Format: SSCSI=

Description: sscsi template number, a string, with a single value. Value range: 065534

5.6 VTCSI

[]


2014-12-11

Page 41, total 68

pages

Format: VTCSI=

Description: vtcsi template number, a string, with a single value. Value range: 065534

5.7 DCSI

Format: DCSI=

Description: dcsi template number, a string, with a single value. Value range: 065534

5.8 SMSCSI

Format: SMSCSI=

Description: smstcsi template number, a string, with a single value. Value range:

099999

5.9 MTSMSCSI

Format: MTSMSCSI=

Description: mtsmstcsi template number, a string, with a single value. Value range:

099999

5.10 UCSI

Format: UCSI=

Description: ucsi template number, a string, with a single value. Value range: 065534

5.11 MCSI

Format: MCSI=

Description: mcsi template number, a string, with a single value. Value range: 065534

5.12 TIFCSI

Format: TIFCSI=

Description: whether to subscribe to TIFCSI and with a single value. Value range:

YES/NO

5.13 LUCSI

Format: LUCSI=

Description: LU-CSI template number, a numerical string, with a single value. Value

range: 065534

5.14 IMCSI

Format: IMCSI=-


[]


2014-12-11

Page 42, total 68

pages

Column 1: o-IM-CSI template number, a numerical string, with a single value.

Value range: 065534;

Column 2: vt-IM-CSI template number, a numerical string, with a single value.

Value range: 065534;

Note: Only a single IMCSI data record exists.

5.15 SHORTNUM

Format: SHORTNUM=

Description: long numbers and short numbers template, a numerical string, with a single


5.16 SUBTPL_ID

Format: SUBTPL_ID=

Description: 065534 subscriber template ID, a numerical string, with a single value. Value range:

5.17 OPTGPRS_TPL_ID

Format: OPTGPRS_TPL_ID=

Description: OPTGPRS template ID, a numerical string, with a single value. Value

range: 065534

6 GPRS Data

6.1 PDPCID

Format: PDPCID=

Description: a numerical string, with a single value. Value range: 0254. The field is consistent with the hybrid subscription template number set by the current HLR. For a

subscriber, this field cannot appear concurrently with the PDPCONTEXT.

6.2 PDPCONTEXT

Format:

PDPCONTEXT=----

--------------

-------------

Description: multiple columns. For a subscriber, this field cannot appear concurrently

with PDPCID.

[]


2014-12-11

Page 43, total 68

pages

Column 1: PdpId, a numerical string, with a single value. Value range:

150. Mandatory parameter

Column 2: Organize, a string, with a single value. Value range:

240241. Mandatory parameter

240: ETSI address

241: ITEFaddress

Column 3: PDPaddress type, a numerical string, with a single

value, mandatory. Value range:

When the value of Organize is 240, the values 00, 01 and 02 represent the

following meanings:

00: dynamic x.121 address

01: ppp dynamic address

02: OSP IHOSS address

When the value of Organize is 241, the values 33 and 87 represent the

following meanings

33: dynamic IPV4 address


141: dynamic IPV4IPV6 address

Column 4: whether the address is a dynamic address, a numerical

string, with a single value, mandatory. Value range: 0, 1

0: static address

1: dynamic address

Column 5: Pdpaddress, a string, with a single value. Value range: a

string consisting of 32 digits, optional. Default value: NONE

Column 6: a parameter of the delay type, a numerical string

consisting of 1 digit, with a single value, optional. Value range: 04

0: default

1: Delay_Clas_1

2: Delay_Clas_2

3: Delay_Clas_3

4: Delay_Clas_4

Column 7: reliability parameter, a numerical string consisting of 1

digit, with a single value, optional. Value range: 05

0: default

1: Acknowledged GTP, LLC, and RLC Protected data

[]


2014-12-11

Page 44, total 68

pages

2: Unacknowledged GTP Acknowledged LLC and RLC, Protected data

3: Unacknowledged GTP and LLC Acknowledged RLC, Protected data

4: Unacknowledged GTP, LLC, and RLC, Protected data

5: Unacknowledged GTP, LLC, and RLC, Unprotected data

Column 8: peak throughput, a numerical string consisting of 1

digit, with a single value. Value range: 09

0: default

1: Up to 1000 octet/s









Column 9: average throughput, a numerical string consisting

of 12 digits, with a single value, optional. Value range: 031

0: default

1: 100 octet/s

2: 200 octet/s

3: 500 octet/s

4: 1000 octet/s

5: 2000 octet/s

6: 5000 octet/s

7: 10000 octet/s

8: 20000 octet/s

9: 50000 octet/s

10: 100000 octet/s

11: 200000 octet/s

12: 500000 octet/s

13: 1000000 octet/s

14: 2000000 octet/s

[]


2014-12-11

Page 45, total 68

pages

15: 5000000 octet/s

16: 10000000 octet/s

17: 20000000 octet/s

18: 50000000 octet/s

31: Best Effort

Column 10: precedence class, a numerical string consisting of

1 digit, with a single value, optional. Value range: 03

0: default

1: High Priority

2: Normal Priority

3: Low Priority

Column 11: accessibility to PLMN, a numerical string

consisting of 1 digit, optional. Value range: 01

0: only accessible APN of HPLMN

1: accessible to APN of VPLMN

Column 12: APN site, a string consisting of 63 digits, with a single value,

optional. Default value: NONE

Column 13: AR: AR priority: a numerical string, with a single value. Value range:

1: High Priority

2: Normal Priority

3: Low Priority

NONE

Default value: NONE

Column 14: TC: Traffic Class: a numerical string, with a single value. Value range

0: Reserved

1: Conversational class

2: Streaming class

3: Interactive class

4: Background class

NONE

Default value: NONE

Column 15: DO: Delivery order: a numerical string, with a single value. Value

range:

[]


2014-12-11

Page 46, total 68

pages

0: Reserved

1: With delivery order ('yes')

2: Without delivery order ('no')

NONE

Default value: NONE

Column 16: ErrSdu: Delivery of erroneous SDUs: a numerical string, with a single

value. Value range:

0: Reserved

1: No detect ('')

2: Erroneous SDUs are delivered ('yes')

3: Erroneous SDUs are not delivered ('no')

NONE

Default value: NONE

Column 17: MSS: Maximum SDU size: a numerical string, with a single value.

Value range

0: Reserved

1150:101500 octets, using a granularity of 10 octets

151: 1502 octets

152: 1510 octets

153: 1520 octets

NONE

Default value: NONE

Column 18: MaxUp: Maximum bit rate for uplink: a numerical string, with a single


0: Reserved

163: n = rate

64127: n = (rate64)/8+64, (rate: 64568)

128254: n = (rate576)/64+128, (rate: 5768640)

NONE

Default value: NONE

Column 19: MaxDown: Maximum bit rate for downlink: a numerical string, with a

single value. Value range: 0254

0: Reserved

[]


2014-12-11

Page 47, total 68

pages

163: n = rate

64127: n = (rate64)/8+64, (rate: 64568)

128254: n = (rate576)/64+128, (rate: 5768640)

NONE

Default value: NONE

Column 20: RBER: Residual Bit Error Rate: a numerical string, with a single value.

Value range:

0: Reserved

1:5*10E2

2:1*10E2

3:5*10E3

4:4*10E3

5:1*10E3

6:1*10E4

7:1*10E5

8:1*10E6

9:6*10E8

NONE

Default value: NONE

Column 21: SduER: SDU error ratio: a numerical string, with a single value. Value

range:

0: Reserved

1: 1*10E2

2: 7*10E3

3: 1*10E3

4: 1*10E4

5: 1*10E5

6: 1*10E6

7: 1*10E1

NONE

Default value: NONE

Column 22: TD: Transfer delay: a numerical string, with a single value. Value

range:

[]


2014-12-11

Page 48, total 68

pages

0: Reserved

115:10ms150ms, in 10 ms increments



NONE

Default value: NONE

Column 23: TP: Traffic handling priority: a numerical string, with a single value.

Value range:

0: Reserved

1: Priority level 1

2: Priority level 2

3: Priority level 3

NONE

Default value: NONE

Column 24: GMaxUp: Guaranteed bit rate for uplink: a numerical string, with a

single value. Value range: 0254

0: Reserved

163: n = rate

64127: n = (rate64)/8+64, (rate: 64568)

128254: n = (rate576)/64+128, (rate: 5768640)

NONE

Default value: NONE

Column 25: GMaxDown: Guaranteed bit rate for downlink: a numerical string,

with a single value. Value range: 0254

0: Reserved

163: n=rate

64127: n = (rate64)/8+64, (rate: 64568)

128254: n = (rate576)/64+128, (rate: 5768640)

NONE

Default value: NONE

Column 26: : PDP context charging characteristics: a numerical string,

with a single value. Value range:

0: None charging characteristics

[]


2014-12-11

Page 49, total 68

pages

1: Hot billing

2: Flat rate

4: Prepaid service

8: Normal billing

3:3

5:5

6:6

7:7

9:9

...

253:253

254:254

NONE

Default value: NONE, indicating Normal billing

Column 27: : Maximum extended bit rate for downlink: a

numerical string, with a single value. Value range:

8700k16000k (with an interval of 100 kbit/s)

16M128M (with an interval of 1 Mbit/s)


NOExtend

Default value: NOExtend

Column 28: : Maximum extended guaranteed bit rate for

downlink: a numerical string, with a single value. Value range:




NOExtend


Column 29: : Maximum extended bit rate for uplink: a

numerical string, with a single value. Value range:




[]


2014-12-11

Page 50, total 68

pages

NOExtend


Column 30: : Maximum extended guaranteed bit rate for

uplink: a numerical string, with a single value. Value range:




NOExtend


Column 31: : PDP address of IPV4, a string, with a single value

and consisting of 8 digits. Value range: ["0000""FFFF"]

Column 32: : standard charging characteristics, characters, with

a single value, 4 hexadecimal digits. Value range: ["0000""FFFF"]

6.3 CHARGE_GLOBAL

Format: CHARGE_GLOBAL=


NONE: no charging feature

HOT: hot charging, realtime charging

FLAT: flat charging

PREPAID: prepaid

NORMAL: ordinary charging

3:3

5:5

6:6

7:7

9:9

...

151:151

152:152

153:153

...

253:253

254:254

[]


2014-12-11

Page 51, total 68

pages

6.4 STD_CHARGE_GLOBAL

Format: STD_CHARGE_GLOBAL=

Description: a string, with a single value, 4 hexadecimal digits. Value range:

["0000""FFFF"]

6.5 OPTGPRS

Format:

OPTGPRS=-------------


Column 1: context id. Value range: 150

Column 2: apntpl id. Value range: 065534

Column 3: qostpl id. Value range: 065534

Column 4: the part one of Address Type. Value: 240, 241

240: ETSI address

241: ITEF address

Column 5: the part two of Address Type. Value range: 33, 87, 0, 1, 2, 141

When the value of Organize is 240, the values 00, 01, and 02 represent the

following meanings:

00: dynamic x.121 address

01: ppp dynamic address

02: OSP IHOSS address

When the value of Organize is 241, the values 33, 87, and141 represent the

following meanings:



141: dynamic IPV4IPV6 address

3: dynamic IPV4_OR_IPV6 address

Column 6: PDP Address. Value: ip address or x.25 address format

Column 7: Whether to allow accessing the APN of the VPLMN. Value: 1, 0

Column 8: charging characteristics. Value range:

0: None charging characteristics

1: Hot billing

[]


2014-12-11

Page 52, total 68

pages

2: Flat rate

4: Prepaid service

8: Normal billing

3:3

5:5

6:6

7:7

9:9

253:253

254:254

Column 9: : PDP address of IPV4, a string, with a single

value, consisting of 8 characters

Column 10: EPS_QOStempalte number. Value range: 065534

Column 11: default APN. Value: YES, NO

0: YES

1: NO

Column 12: *APN. Value: YES, NO

0: YES

1: NO

Column 13: APN type, with a single value. Value range: PS_APN, EPS_APN,

BOTH:

PS_APN: 1

EPS_APN: 2

BOTH: 3

Column 14: standard charging characteristics, characters, with a single value,

4 hexadecimal digits. Value range: ["0000""FFFF"]

6.6 OPTGPRSTPLID

Format: OPTGPRSTPLID=

Description: a numerical string, with a single value. Value range: 065534

7 FM Data

[]


2014-12-11

Page 53, total 68

pages

7.1 FMSUBTYPE

Format: FMSUBTYPE=

Description: a string, with a single value. The parameter indicates the role of the user in

the FM service. Value range:

INITSUB: initial user

SUPVSUB: manager user

REMOTESUB: GSM virtual remote user

7.2 INITSUB

Format: INITSUB=

Description: initial subscriber, a string, with a single value. Value range: 01

7.3 SUPVSUB

Format: SUPVSUB=

Description: supervise subscriber, a string, with a single value. Value range: 01

7.4 FMSUBCOR

Format:

FMSUBCOR=---------

Description: FM subscriber corset, multiple columns. The parameter exists only if

FMSUBTYPE is INITSUB or SUPVSUB. Each column has the same range: 0254. Default value: 255.

7.5 AUTHREMOTE

Format: AUTHREMOTE=-

Description: FM authorized remote number, multiple columns. Value range:

Column 1: authorized remote number, a string with 15 digits, in a format similar to

TBCD format.

Column 2: authorized type, value range:

INITSUB: initiating subscriber

SUPVSUB: supervisor

7.6 REGREMOTE

Format: REGREMOTE=--------

[]


2014-12-11

Page 54, total 68

pages

Description: registered remote number information, multiple columns

Column 1: registered remote number, a string consisting of 16 digits, in a

format similar to TBCD format

Column 2: a string that describes the function of the remote number, with a

single value, optional, and consisting of 60 digits. Default value: NONE

Column 3: remote number type. Value:

DUMMYRM: dummy remote;

GSMRM: GSM remote

Column 4: function entity address, a numerical string consisting of 115 digits, with a single value

Column 5: Corset of the remote numbers. Value range: 1254. Default value: 255





8 EIN Data

8.1 EIN

Format: EIN=-Description: multiple columns

Column 1: service type. Value range:

EOCSI: EOCSI service

ETCSI: ETCSI service

BEOCSI: BEOCSI service

EOICK: EOICK service

Column 2: service key, a numerical string, with a single value. Value range:

0999

9 Multi-IMSI Data

9.1 MIMSI

Format:

MIMSI=-----

[]


2014-12-11

Page 55, total 68

pages

-

Description: Multi-IMSI data is exported by IMSI and each IMSI data occupies only

one line. Value range:

Column 1: IMSI number, with a numerical string consisting of 16 digits, in a

format similar to TBCD format

Column 2: user type. Value range:

MULTIIMSI: multi IMSI user

ORDERLYRING: OrderlyRing user

SIMULTANEOUSRING: SimultaneousRing user

ONELIVE: OneLive user

Column 3: subscription serial number. Value range: 19

Column 4: connection sequence number. Value range: 19

Column 5: IMSI used to receive short messages. Value range: 19

Column 6: IMSI used for the VOBB service. Value range: 09

Column 7: Index of the IMSI contained in the latest successful PSI response

9.2 VOICE

Format: VOICE=-


Column 1: voice mailbox number, a numerical string consisting of 115 digits

Column 2: voice mailbox index. Value range: 12 digits

10 LINKSIM Data

10.1 SIMSI

Format: SIMSI=

Description: a numerical string consisting of 16 digits, in a format similar to TBCD

format. Value: IMSI number of the bound user

11 OKSC Data

11.1 OKSC

Format: OKSC=

Description: a numerical string, with a single value. Value range: 0-65534, OKSC data

template for subscription.

[]


2014-12-11

Page 56, total 68

pages

12 Nokia Private Service SMS INAP Subscription Data

12.1 NSMSIN (NSMSIN Data)

Format:

NSMSIN=------

Description: multiple columns, with a single value

Column 1: SCP address, which contains a string of 1 to 15 digits, in a format

similar to TBCD

Column 2: NSMSIN service key. Value range: 12147483647

Column 3: detecting point (MO), which specifies whether the IN service is

triggered when the SMS is originated. Value: YES, NO

Column 4: detecting point (MT), which specifies whether the IN service is

triggered when the SMS is terminated. Value: YES, NO

Column 5: detecting point (SR), which specifies whether the IN service is triggered

when the status report is delivered. Value: YES, NO

Column 6: TAMM, which specifies whether all short messages can be triggered.

Value: YES, NO

Column 7: STATUS, which specifies the status of the SMS INAP service. Value:

NOTPROV, PROV, ACT

13 COMISDN Service or Multi-SIM Service Subscription Data

Data of other vendors must be migrated by running the COMISDN command.

13.1 COMISDN (COMISDN Data)

Format: COMISDN=-

Description: COMISDN service group number, multiple columns, with a single value

Column 1: COMISDN, which contains a string of 1 to 15 digits, in a format similar

to TBCD

Column 2: OVERIDE, which specifies the COMISDN override enable. Value: YES,

NO

13.2 OWNISDN (OWNISDN Data)

Format: OWNISDN=--

Description: multiple columns, with multiple records

[]


2014-12-11

Page 57, total 68

pages

Column 1: auxiliary number, which contains a string of 1 to 15 digits, in a format

similar to TBCD

Column 2: Terminating Call Right (TCR) of GROUPSIM members, which specifies whether

the called subscriber is allowed to receive a call or short message. Value:

PCALL: 1 (default value), allowed to receive a call or short message

NCALL: 0, not allowed to receive a call or short message

Column 3: serial number of the auxiliary number, which is automatically generated to 19

The primary number is fixed to 1 and the default value is 255.

13.3 MSIM (Subscribing to Multi-SIM Service)

Format:

MSIM=----------

-

Description: multiple columns, with multiple records

Column 1: E multi-IMSI subscriber type. Value:

ACTBYUPL: considering the subscriber who performs the latest location

update as the activated subscriber

ACTBYUSSD: considering the subscriber who conducts a USSD operation

for activating itself as the activated subscriber

Sequential

Parallel

Parallel_preferred

MISDN: Multi-MSISDN

Column 2: MSISDN activation code, which contains a string of 1 to 15 digits, in a

format similar to TBCD

Column 3: no answer time for parallel alerting. Value range: 0255

Column 4: no answer time for sequential alerting. Value range: 0255

Column 5: user type. Value range: 0254

Column 6: tone type. Value: Basic_Tone, Intelligent_Tone

Column 7: call-forwarding suppression. Value: YES, NO

Column 8: sms activation MSISDN, which contains a string of 1 to 15 digits, in a


Column 9: voice activation MSISDN, which contains a string of 1 to 15 digits, in a


Column 10: whether to support synchronization. Value:

[]


2014-12-11

Page 58, total 68

pages

Allowed (1)

Denied (0): default value

Column 11: MMS activation MSISDN, which contains a string of 1 to 15 digits

13.4 LCS Activation MEMBERISDN, Which Contains a String of 1 to 15 Digits (MEMBERISDN Data)

Format: MEMBERISDN=-


Column 1: multi-SIM member MSISDN, which contain a string of 1 to 15 digits, in a


Column 2: member order. Value range: 08, 0 means not to activate the MSISDN of a member

Note: Multiple records are made.

13.5 GROUPISDN (GROUPISDN Service Status)

Format: GROUPISDN=--

Description: multiple columns, with a single value

Column 1: group MSISDN.

Column 2: whether to support synchronization. Value:

Denied (0): not support (default)

Allowed (1): support

Column 3: whether to deny the USSD operation. Value:

Denied (0): deny

Not_Denied (1): not deny

Not_Support (255): default

14 MSM Service Subscription Data

14.1 M2M

Format: M2M=

Description: whether to provide the service of reporting subscriber's status to the M2M

platform. Value: PROV, NOTPROV

14.2 USERCATEGORY

Format: USERCATEGORY=

Description: Specifies whether a subscriber is an M2M or normal subscriber. Value:

NORMAL, M2M

[]


2014-12-11

Page 59, total 68

pages

14.3 IMEIBIND

Format: IMEIBIND=-


Column 1: IMEIID, for internal use only, which is set to 1

Column 2: IMEI that has been bound with an IMSI, which contains a string of 1 to 14

digits, in a format similar to TBCD

Note: Multiple records are made.

15 EPS Service Subscription Data

15.1 EGR

Format: EGR=-


Column 1: whether to provide the EGR service, that is, whether HSS can interwork with

HLR. Value: YES, NO

Column 2: HLR serial number corresponding to the EGR service. Value range: 0255

Note: A single record is made.

15.2 NON3GPP

Format:

NON3GPP=-------


Column 1: whether to support the Non-3GPP attribute subscription. Value: YES,

NO

Column 2: restriction on Non-3GPP wireless access. Wireless Local Area Network

is not allowed. Value: YES, NO

Column 3: restriction on Non-3GPP wireless access. CDMA2000_1X access

network is not allowed. Value: YES, NO

Column 4: restriction on Non-3GPP wireless access. High-speed data packet is not

allowed. Value: YES, NO

Column 5: restriction on Non-3GPP wireless access. Super mobile broadband is not

allowed. Value: YES, NO

Column 6: restriction on Non-3GPP wireless access. Extended high-speed data

packet is not allowed. Value: YES, NO

Column 7: the capability of Non-3GPP Gate Way (GW) for supporting mobile IP.

Value:

[]


2014-12-11

Page 60, total 68

pages

MIP6_INTEGRATED (1): support Mobile IPv6 integrated scenario bootstrapping functionality

PMIP6_SUPPORTED (2): instruct the Non-3GPP GW to use PMIPV6

IP4_HOA_SUPPORTED (4): instruct the Non-3GPP GW to authorize the UE to use IPV4-HOA

ASSIGN_LOCAL_IP (8): instruct the Non-3GPP GW to assign local IP addresses to subscribers

MIP4_SUPPORTED (16): instruct the Non-3GPP GW to use MIPv4

GTPv2_SUPPORTED (32): instruct the Non-3GPP GW to use GTPv2

Column 8: the timeout period of the next Diameter message in Non-3GPP

access mode. The unit is second. Value range: 14294967295

Note: A single record is made.

16 PS_PDP Service Subscription Data

16.1 PSSER

Format:

PSSER=------

Description: in multiple lines and columns

Column 1: PROFILE_ID, a decimal number of 3 digits

Column 2: PDP context ID. Value range: 150

Column 3: PS APNQOS template ID. Value range: 065534

Column 4: HLR_INDEX, a single value. Value range: 0255

Column 5: PDP other address. Value range: a string of 0 to 39 digits

Column 6: PDP other address indicator. Value:

STATIC: static address

DYNAMIC: dynamic address

Column 7: PDP IPV4 address. Value range: a string of 0 to 39 digits

17 EPS_PDN Service Subscription Data

17.1 EPSSER

Format:

EPSSER=

[]


2014-12-11

Page 61, total 68

pages


Column 1: PROFILE_ID, a decimal number of 3 digits

Column 2: PDN context ID. Value range: 150

Column 3: EPS APNQOS template ID. Val

Documents

HSS9860 V900R008 HLR Subscriber Data in Huawei Standard Format