
2/77


1References........................................................................................................ 4

2Revisions .......................................................................................................... 5

3Overview ........................................................................................................... 6

4eNodeB Overview ................................................................................................ 8

4.1BBU Chassis ................................................................................................... 84.2RRUs ............................................................................................................ 9

5Commissioning Preparation (Non-Maintenance Window)........................................... 11

5.1

Planning Data Preparation................................................................................. 11

5.1.1LTE Summary Data File............................................................................... 11

5.1.2How to get LTE Summary Data File ................................................................. 15.1.3Common Configuration Template ................................................................... 1

5.2Access the Huawei eNodeB EMS ........................................................................ 15.3Set Auto Acknowledge Rule ............................................................................... 15.4Prepare Commercial License ............................................................................. 185.5Prepare Commissioning Task ............................................................................. 19

6Commissioning Execution (Maintenance Window).................................................... 26

6.1Establish and Check OM Link ............................................................................. "6.2Change Initial Board Configuration ....................................................................... #16.3Start Commissioning task .................................................................................. #6.4Complete eNodeB Commissioning ....................................................................... #"

6.5Distribute LTE Commercial Licenses .................................................................... #86.6Bind WiMAX and LTE ...................................................................................... $16.7Set the eNodeB Status ..................................................................................... $$

7Acknowledge Alarm Manually.............................................................................. 47

8Activate Counters .............................................................................................. 52

9Additional Configuration ..................................................................................... 53

10Enable RF Transmission .................................................................................... 56

11Clear Alarms ................................................................................................... 58

12Enable Access Barring (If Required)..................................................................... 61

13Verifying Operational Status............................................................................... 62

14Backup eNodeB Configuration ............................................................................ 63

15Useful eNodeB MML Commands......................................................................... 65

16Cell Data Adjustment and Neighboring Configuration.............................................. 66


3/77


Appendix A Default Configuration Recovery...................................................... 74


4/77


1 References

%ua&ei ()#9** +TE ((U#9** Upgra,e -ui,e

%ua&ei ()#9** +TE +iite, AT/ -ui,e

%ua&ei ()#9** +TE 0ull AT/ -ui,e


5/77


2 Revisions

Date Revision Description Author

Aug 1**1

*.1 2nitial release. Huawei

Aug 11 *.1 2nternal revie& an,optiization 3lear&irerevie&.

Huawei

Aug 1# *. 4iscellaneous o,ificationsaccor,ing la5 equipentoperations

Huawei, Jeff r!

Aug 1$ *.# 0irst revie& ,raft for3lear&ire

Huawei, Jeff r!

Aug 1 *.$ %ua&ei e,its. Huawei

Aug 1 *. 3lear&ire e,its. Jeff r!

Aug 8 *." A,,e, +((/ 5efore startcoissioning

Huawei, Jeff r!

Aug 9 1.* 2nitial release. A,,e,optional Section 12 EnableAccess Barring.

Jeff r!

)ep 1" 1.*1 %ua&ei e,its an, up,atesaccor,ing to 06A ,eplo7ent.

Huawei, Jeff r!

)ep 19 1.* %ua&ei e,its an, up,atesaccor,ing to 06A ,eplo7ent

Huawei, Jeff r!

6ct 1 1.*# A,, proce,ure ho& to

anuall7 acno&le,ge alarsan, su5scri5e perforancecounters.

Huawei, Jeff r!

6ct 1 1.1 A,, a,,itional configurationfor 5asic trou5leshooting an,A+:ET alar clearance.

Huawei, Jeff r!


6/77


3 "verview

The purpose of the coissioning process is to a,, a ne& e;o,e(into the +TE net&or. The final outcoe of this process is ae;o,e( that is rea,7 for coercial service. This ,ocuent coversthe net&or coissioning proce,ures of the coissioningprocess. The fiel, operation proce,ures are covere, in the HuaweiDBS3900 LTE Operation Proceure !"e#erence 1$ %The copletecoissioning process involves the coor,ination of the fiel,operations tea that perfors the fiel, test an, the coissioningtea that perfors the net&or proce,ures.

;et&or coissioning is ,ivi,e, into 3oissioning /reparation an, 3oissioning phase.

3oissioning preparation loa,s each e;o,e( configuration onE4) an, create a coissioning prior to e;o,e( connectivit7.

3oissioning execution occurs after har,&are installation an,5achaul connectivit7. Ethernet port connectivit7 triggers %3/an, the coissioning auto ,eplo7ent tas. A health checreport is provi,e, &hen the auto ,eplo7ent tas is finishe,.

This ,ocuent explains the net&or coissioning process an,

the follo&ing sections shoul, 5e follo&e, in the or,er the7 appear.


7/77


i#ure 1$ %etwor& Architecture


8/77


4 e%o'e( "verview

4.1 (() *hassis

The section ,escri5es the har,&are coponents of the ((Uchassis. ?e &ill overla7 ne& +TE coponents on the sae ?i4A@((U chassis. )tan,ar, coissioning involves a single ((U chassis connecte, to # ::Us .

i#ure 2$ (() with 3 RR)s

The ((U chassis has the follo&ing car,s installe,

3ar, +ocation escription

+4/T )lot " The +4/T is the ain processing an, transission 5oar, for+TE

(4/T )lot B The (4/T is the ain processing an, transission 5oar, for?i4A@.

+((/c )lot * The +((/c is the 5ase5an, processing an, ra,io interfaceunit for +TE.

(((2 )lot =# The (((2 is the 5ase5an, processing an, ra,io interface unitfor ?i4A@.

U/EU U/EU*=1 The U/EU is the chassis po&er suppl7 unit.0A; 0an )lot The fan unit for the chassis.()(3 (acplane The ()(3 is the 5acplane of the chassis an, provi,es po&er

suppl7 an, service channels for each 5oar,.


9/77


i#ure 3$ (() *hassis +ot -ocations

The t7pical ne& e;o,e( &ill have one +4/T one +((/c an, U/EU. The 0A; an, ()(3 o,ules are stan,ar, coponents.

4.2 RR)s

The reote ra,io unit receives :0 signals an, thentransits the processe, signals to the ((U or the antenna s7ste.The ::U are connecte, to the +((/ car, via fi5er an, to theantenna via coaxial Cupers. The %ua&ei ::U#B* is a 4246 $transit an, $ receive s7ste that can support ultiplecarriers &hich &as originall7 ,esigne, for ?i4A@. )ince overla7+TE on the existing ::U ?i4A@ &ill use T: ports of

::U. +TE &ill use T: ports of ::U.

)ince the ::Us are external to the chassis the7 are configure, as::U chain. efault is * 1 . Each ::U chain &ill 5in, +((/ an,::U 3/:2 port. The ::U an, cell relate, configuration &ill 5e 5uil,on this chain. ::U &ill 5e configure, as "* "1 an, " 57 ,efault0igure $ sho&s the ::U locations as ,epicte, in E4).


10/77


i#ure 4$ RR) -ocations


11/77


5 *oissionin# /reparation 0%onaintenancein'ow

3onfiguration ,ata inclu,es gol,en paraeters :0 an, 2/ ,esign,ata fro 3learvision har,&are ,esign ,ata fro )A/ .

Use the auto ,eplo7ent function in 4*** to prepare thesoft&are coissioning tas col, patch hot patch configuration,ata %3/ inforation an, e;o,e( icon in the topolog7 vie&.

:ET an, Environent alars are configure, on the ?i4A@.

5.1 /annin# Data /reparation

2n preparation for +TE e;o,e( coissioning a +TE suar7 ,atafile an, a coon configuration teplate are use, to generatee;o,e( configuration ,ata. The +TE suar7 ,ata file thatcontains har,&are net&or an, :0 configuration ust 5e create,for each e;o,e(. This is the responsi5ilit7 of the coissiontea. ata for these files coe fro the aret 2/ planning listan, 3learvision. These files are use, to configure the e;o,e( froE4). The coon configuration teplate contains ,efault

paraeters an, is preloa,e, in the E4).

ae 1 $ e%o'e( *onfi#uration epates

ie%ae

Description

+TE)uar7ata 0ile

)pecif7 each e;o,e( configuration

3oon

3onfigurationTeplate

)pecifies ,efault coon

configuration for each e;o,e(

;ote 2f the sae paraeters are ,efine, in 5oth the suar7,ata file an, the teplate the value in the suar7 ,ata file&ill over&rite the ,ata in the teplate.

5.1.1 - +uar! Data ie

The +TE suar7 ,ata file is a 4icrosoft Excel file that isiporte, into the 3onfiguration 4anageent Express


12/77


coponent of the E4) as part coissioning preparation. Thesuar7 ,ata file ,efines &hich paraeters nee, to provi,e,./araeter values for ultiple e;o,e( can 5e fille, out in onesuar7 ,ata file to facilitate 5ul coissioning. Dello&5acgroun, coluns nee, to a,Cust accor,ing to eacharetcore4***. (lue 5acgroun, coluns nee, to a,Custaccor,ing to each e;o,e( ,esign ,ata.

5.1.2 How to #et - +uar! Data ie

/lease contact &ith eff 0r7 or ;icole to get the +TE )uar7 ata 0ile.

5.1.3 *oon *onfi#uration epate

/araeters such as ,evice paraeters ra,io paraeters an,algorith paraeters that are coon for e;o,e(s are ,efine, inthe coon configuration teplate. This teplate is preloa,e, inthe E4) an, is reference, 57 the +TE )uar7 ata 0ile.

5.2 Access the Huawei e%o'e( +

This section ,escri5es installation of the %ua&ei E4) client an, generalclient access. 2nstallation of the client can 5e perfore, via the %ua&ei

E4) &e5 interface. /lease follo& the next steps to install the E4) client.

1. 3hec &ith 7our a,inistrator to setup 7our E4) login cre,entials.

. -o to httpG%ua&ei E4) %ostnae or 2/Hcau.


13/77


i#ure 5$ Huawei + nstaation /a#e

#. 2f ava is not alrea,7 installe, on 7our /3 clic on the Downloa &"Elin an, follo& the &izar, steps to install ava.

$. To install the client clic the Setup5utton. A ava ?e5 )tart&in,o& sho& launch sho&ing progress of the installation ,o&nloa,.0ollo& the installation instructions to install the client.


14/77


i#ure 6$ Huawei + *ient nstaation

. 6nce the installation is coplete launch the client fro 7our?in,o&s start enu Start=HProgra's=Hi(anager(2000 )lient=H(2000 )lient.

". The first tie 7ou access the client 7ou ust a,, the E4) server.3lic on the I*J 5utton to a,, the E4) server.

i#ure 7$ A'' + +erver

B. /rovi,e 7our login cre,entials to access the E4).


15/77


5.3 +et Auto Ac&nowe'#e Rue

1. +ogin into E4).

. 3hoose 4onitor=HAlar )etting=H6ptions.

i#ure 8 Depo!ent o'e enu

#. 3lic Auto Acno&le,ge an, clic A,,.

i#ure 9 A'' % to Depo!ent o'e

$. 3lic


16/77


i#ure 1: A'' Rue

. 3lic Alar )ource Ta5. 3hec 3usto. 3lic A,, an, choose ;ET7pe.

i#ure 11 A'' %

". 3lic ()#9**+TE an, then clic 6K.


17/77


B. 3lic 6K

8. 3hoose Tie, in Acno&le,geent 4o,e an, clic 6K.


18/77


9. )et Execution tie as 1#* an, clic 6K.

5.4 /repare *oercia -icense

1*.+ogin into E4).

11.2n ?i4A@ coan, &in,o& input )/E+A(E+ELTD/EM)U(:A3K3;M*):;M*N to get (ar3o,e.


19/77


The output shoul, 5e as follo&ing

1./rovi,e this inforation to the assigne, %ua&ei engineer to o5tain

the e;o,e( coercial license.

5.5 /repare *oissionin# as&

1. 3reate a planne, area.

3hoose 4***=H34 Express=H /lanne, Area=H3reate /lanne,Area. Enter the /lanne, Area ;ae an, clic O+.


20/77


. 2port +TE suar7 ,ata file.

),oose )( E-press./LTE Application./'port Data./ 'porteoeB Su''ar Data.

3lic select require, +TE suar7 ,ata file an, clic Open.

3lic e-t the 34E &ill process the e;o,e( configuration ,atafro the +TE suar7 ,ata file an, coon configurationteplate. After coplete chec e;o,e( an, clic e-t.


21/77


34E iports e;o,e( configuration ,ata.

After iporting finishes clic inis,.


22/77


e;o,e( iport &ill appear in the navigation tree .

#. 3hec the e;o,e( configuration ,ata.

3lic select e;o,e( an, clic O+%

The progress 5ar is ,ispla7e,. 2f the ,ata vali,ation ,oes notsuccee, change the configuration ,ata as propte, until thevali,ation succee,s.


23/77


$. Export the configuration ,ata an, create the coissioning tas.

3lic )elect Brea4 on ailurefor Progressing (oe. )electe;o,e( an, clic O+. The progress 5ar is ,ispla7e,

3lic 5es&hen it propts Io 7ou &ant to go to the e;o,e( Autoeplo7entJ.


24/77


:ecor, the .csv file nae for future use an, clic O+.

The coissioning tas %3/ inforation an, e;o,e( icon in thetopolog7 are create,.

The e;o,e( icon appears in the su5net in Topolog7.

The status of coissioning tas is 6aiting #or Start.


25/77


. 3oissioning inclu,e, several su5=tass. )elect a coissioningtas right clic an, choose Tas )etting. )etting steps as follo&ing.

". 3lic 6K.


26/77


6 *oissionin# ;ecution 0aintenancein'ow

6.1 staish an' *hec& " -in&

0ollo&ing operation &ill esta5lish an, chec the 64 lin 5et&eenthe 4*** an, the e;o,e(.

1. +ogin into E4).

. 3hec ((U E); if 0iel, Tech can get ((U E); fro site.

2n ?i4A@ coan, Lie& input )/E+A(E+ELTD/EM)U(:A3K3;M*):;M*N to get ((U E);.



27/77


#. 3hec ((U E); if 0iel, Tech cannot get ((U E); frosite.

2f fiel, tech canOt get ((U E); fro site as for (4/T E);. Use )/ E+A(E+ELTD/EM(6A:3;M*):;M*);MBNget (ar3o,e of (4/T. 2f (4/T E); atche, &ith (ar3o,e incoan, result use )/E+A(E+ELTD/EM)U(:A3K3;M*):;M*N to get ((U E); as step.


)/ E+A(E+ELTD/EM(6A:3;M*):;M*);MBN

?A=:T(***#P1P%UAP1

QQQ %UA?E2 *1=*8=8 ##1$

6R4 S89

$B98)/E+A(E+ELTD/EM(6A:3;M*):;M*);MBN

:ET36E M * 6peration succee,e,.


28/77


(oar, electronic la5el

======================

3a5inet ;o. M *

)u5rac ;o. M *

)lot ;o. M B

Electronic +a5el M VWArchives2nfo LersionX

VArchives2nfoLersionM#.*

W(oar, /ropertiesX

(oar,T7peM?11(4/T

(ar3o,eM**K;T1*9#***#

2teM*#**K;T

escriptionMT:A; ?11(4/T ?24A@ 4ain /rocessing RTransission Unit 3 = &ith :T -/)car,

4anufacture,M**9=*#=$

Len,or;aeM%ua&ei

2ssue;u5erM

3+E23o,eM

(64M

(oar, electronic la5el


29/77


======================

3a5inet ;o. M *

)u5rac ;o. M *

)lot ;o. M B

/ort ;o. M *

Electronic +a5el M W/ortP*X

VWArchives2nfo LersionX

VArchives2nfoLersionM#.*

$. )elect the coissioning tas fro the coissioning tas list

an, ,ou5le=cliceoeB EScell. 3lic in the E); value cell.The Bin ES,ialog 5ox is ,ispla7e,.

. )elect the E); an, clic O+to return to the coissioning taslist. The tas status &ill 5e 6aiting #or Start.


30/77


31/77


B. 3lic 6K.

8. The )tatue &ill change to 6aiting #or (anual Operation.

6.2 *han#e nitia (oar'*onfi#uration

3hec an, change configuration in slot * to slot ". After thisoperation slot * is configure, &ith +((/ an, slot " is configure,&ith +4/T. ;o atter slot B is initiall7 configure, or not no nee, tochange it.

1. 2f +4/T is not configure, in slot " fro factor7 execute follo&ing44+ coan, to e;o,e( in 44+ coan, vie& to a,, +4/T.


32/77


After running this coan, +4/T 5oar, &ill tae a5out inutesto restart.

A (:3;M*):;M*);M"(TM+4/TN

. 2f there are +((/ 5oar, configure, in slot 1 slot slot# slot$ slot nee, reove the.

0or exaple there is +((/ in slot execute follo&ing 44+coan, quer7 correspon,ing ::U an, ::U3hain ;u5er thenreove ::U ::U3hain an, +((/.

+)T ::UN

+)T ::U3%A2;N

:4L ::U3;M*):;MW:esult fro +)T ::UX);M*N

:4L ::U3%A2;:3;MW::U 3hain ;o. for this slot fro +)T::U3%A2; :esultXN

:4L (:3;M*):;M*);MN

#. 2f +((/ 5oar, in slot * is not configure, execute follo&ing 44+coan, to e;o,e( in 44+ coan, vie&.

A (:3;M*):;M*);M*(TM+((/?4M:ATPTN

$. After a5out # inutes execute follo&ing coan, to quer7 thesoft&are loa,ing status. )/ )60T)TATU)N


33/77


The output shoul, 5e as follo&ing 2,le eans soft&are loa,ingfinishe, or no nee, to loa,ing.

)/ )60T)TATU)N

?A=:T(***#P1P%UAP1P+

QQQ %UA?E2 *1=*9=1 *9$**

6R4 S#*B

"1BB)/ )60T)TATU)N


:esult of ;E soft&are anageent status quer7

=============================================

)tatus T7pe ;ae /rogress

2,le ;U++ ;U++ ;U++

=== E;

. Execute follo&ing coan, to quer7 5oar,s status.

)/ (:N


34/77


The output shoul, 5e as follo&ing. 3onfir state of +((/ in slot *an, +4/T in slot " is ;oral.

)/ (:N

ispla7 (oar, 2nforation

=========================

3a5inet ;o. )u5rac ;o. )lot ;o. T7pe A,inistrativestate Availa5ilit7 )tatus )tan,57 )tatus 6perational)tate Alar )tatus

* * * +((/ Unloce, ;oral;U++ Ena5le, ;oral

* * ;U++ ;U++ Unconfigure,3ounication lost ;U++ isa5le, ;oral

* * # ;U++ ;U++ Unconfigure,3ounication lost ;U++ isa5le, ;oral

* * " +4/T ;U++ ;oralActive Ena5le, ;oral

* * B ;U++ ;U++ Unconfigure,3ounication lost ;U++ isa5le, ;oral

* * 1" 0A; ;U++ ;oral;U++ Ena5le, ;oral

* * 19 U/EU ;U++ ;oral;U++ Ena5le, ;oral


35/77


6.3 +tart *oissionin# tas&

1. 6n the Deplo'ent List ta5 page right=clic coissioning tasan, then choose (anual )on#ir'fro the shortcut enu.

. The 4*** starts coissioning an, the selecte, coissioningtass s&itch to the :unning status.

#. 3lic . the execution status ,escriptionstart tie an, en, tie &ill 5e ,ispla7e, on the right pane.


36/77


6.4 *opete e%o'e(*oissionin#

1. Execute follo&ing coan, to quer7 soft&are version.

)/ (:LE:N

The output shoul, 5e as follo&ing.

)/ (:LE:N

?A=:T(***#P1P%UAP1P+


37/77


QQQ %UA?E2 *1=*9=1" 188*

6R4 S$**B

$**B)/ (:LE:N


:esult of current 5oar, soft&are quer7

======================================

3a5inet ;o. )u5rac ;o. )lot ;o. T7pe )oft&are Lersion%ar,&are Lersion (oot:64 Lersion 6peration :esult

* * * +((/ L1**:**$3**)/3B* $B**$.*18.*1.**1 6peration succee,e,.

* * ;U++ ;U++ ;U++;U++ The 5oar, has not 5een configure,.

* * # ;U++ ;U++ ;U++;U++ The 5oar, has not 5een configure,.

* * " +4/T L1**:**$3**)/3B* $11"*$.*1.*1.** 6peration succee,e,.

* * B ;U++ ;U++ ;U++;U++ The 5oar, has not 5een configure,.

* * 1" 0A; 1*1 0A;.;U++ 6peration succee,e,.

* * 19 U/EU ;U++ ;U++;U++ 6peration succee,e,.

* "* * 4::U 1.*9$.1*.*1B4::U.%?E2.5(#"1*** 1.**.1*.*1B 6peration succee,e,.

* "1 * 4::U 1.*9$.1*.*1B4::U.%?E2.5(#"1*** 1.**.1*.*1B 6peration succee,e,.

* " * 4::U 1.*9$.1*.*1B4::U.%?E2.5(#"1*** 1.**.1*.*1B 6peration succee,e,.


38/77


=== E;

. -o to 4***=H3onfiguration H Auto eplo7ent H e;o,e( Autoeplo7ent. :ight clic one coissioning tas &ith status?aiting for 3onfiration choose 3onfir 3opletion to copletee;o,e( coissioning.

6.5Distriute - *oercia-icenses

1. 3hoose (2000./License / E License (anage'ent / Stan.AloneLicense (anage'ent.


39/77


2. 3lose 0ilter.

3. )elect ;E +icense 4aintenance fro the navigation tree.

4. 3lic . 2n the ,ispla7e, )7nchronize ;E2nforation ,ialog 5ox select ;Es to 5e s7nchronize, an, clic

to accoplish ;E s7nchronization.

5. 3lic . 2n the ,ispla7e, Loa License ile,ialog 5ox loa, the license e7 files save, in 7our pc.


40/77


6. 3lic e-t.

7. 3lic Selectto choose ;E.


41/77


8. 3lic inis,.

6.6 (in' iA< an' -

1. 3hoose )on#iguration./(ulti.(oe Base Station (anage'ent./(ulti.(oe "elations,ip (anage'ent.

2. 3lic "elations,ip (anage'entta5 an, 3hoose Bin. The Bin ew(eoeB,ialog 5ox is ,ispla7e,. )elect ?i4A@ an, +TE e;o,e(an, clic 6K.


42/77


3. After 5in,ing is coplete it &ill sho& as follo&ing in "elations,ip(anage'ent.

4. 3lic ),ec4 )orrelationsta5 an, select ),ec4./B (BTS.


43/77


5. )elect 4(T) an, clic O+.

6. Statussho&s nor'al.


44/77


6.7 +et the e%o'e( +tatus

1. 3hoose (aintenance./(aintenance (oe.

2. 3lic select e;o,e( set E (oeas or'al choose nstant.3lic O+.


45/77


3. 3lic 5es.

4. 3lic )lose.

5. 3lic 7uer (oe&in,o& is ,ispla7e,. )elect the e;o,e(.3lic O+.


46/77


6. 3hec E (oein (aintenance (oesho&s O"(AL.


47/77


7 Ac&nowe'#e Aar anua!

0ollo& the next steps to acno&le,ge alar anuall7 if necessar7.

1. )elect (onitor./Browse Alar' List.

. 2n (asic )etting ta5le clic A,vance,.

#. 3lic )pecial )tatus then clic Lalues. 3lic Testing an, Use

select it. 3lic 6K.


48/77


$. 3lic 6K.


49/77


. 2n Alar )ource ta5le chec 3usto an, choose A,,=H;ET7pe.


50/77


". 3lic ()#9** +TE an, use to select it. 3lic 6K.

B. 3lic 6K in 0ilter.


51/77


8. 3hoose alars an, clic Acno&le,ge.


52/77


8 Activate *ounters

0ollo& the next steps to activate counters of all e;o,e(.

9. )elect Per#or'ance./(easure'ent (anage'ent.

1*.3lic 4easureent )ettings. 3hec 0unction )u5set. 3hoosefunction su5set of e;o,e( in left navigation tree. 3hoose alle;o,e(. 3lic "* inutes ta5le. :ight clic in counter ta5lean, choose )elect All. 3hec All in 65Cect. 3hec ;e& o5Cectauto easue. 3lic Appl7.


53/77


9 A''itiona *onfi#uration

0ollo& the next steps to perfor a,,itional configuration.

11.)elect (aintenance./((L )o''an.

1.2n the ;E tree select the e;o,e( to 5ring up the 44+coan, interface.

1#.Execute the follo&ing coan,s.

I)/ ET%/6:TJ for chec Ethernet port status an,negotiation result &ith s&itch port. This also coul, verif7fiel, tech install Ethernet ca5le to -E0E* or -E0E1.


54/77


I)/ )0/J &as use, for chec each e)0/ port status of+((/. Dou coul, fin, transission rate po&er ulti o,e or single o,e. This coul, 5e use, for 3/:2 lintrou5leshooting.

I)/ A:/J &as use, for chec each port next hopconfiguration. )&itch port a7 5e configure, &rong nexthop an, L+A;. This coul, help us to i,entif7 if %3/function ,oesnOt &or in the fiel,.


55/77


1$.2f a,,itional 44+ configuration is nee,e, it can also 5ea,,e,.


56/77


10 nae R ransission

uring the configuration an, soft&are upgra,e of the e;o,e( the:0 transission &as ,isa5le,. The sectors ust no& 5e ena5le, inor,er to perfor fiel, vali,ation. 0ollo& the follo&ing steps

1. )elect (aintenance./((L )o''an.

. 2n the ;E tree select the e;o,e( to 5ring up the 44+coan, interface.

#. Execute the coan, A3T 3E++ for each of the sectors an,carriers to ena5le :0. )ectors an, carriers are *=in,exe,.

$. 3hec the sector an, carrier status 57 executing )/ 3E++.This &ill list all the cells an, )ell nstance Stateshoul,appear as or'al.


57/77



58/77


11 *ear Aars

uring the coissioning process soe alars are generate, thatust 5e cleare, anuall7

1(inor " 8nit ALD Switc, )on#iguration (is'atc,

Execute I+)T :ETJ to chec if there is no :ET ,evice please use

coan, I46 :ET/6:TJ to s&itch off :ET port. This alar

&ill 5e cleare,.

2(inor " 8nit ALD )urrent Out o# "ange

The actual po&er coul, 5e #*A ho&ever the lo& threshol,

&as configure, as $* 57 ,efault. )o execute I46 :ET/6:TJ to

change threshol, the sae as ?i4A@ &ith stan,ar,

configuration. Dou nee, to select IU)E:P)E+0PE02;EJ. The

recoen,e, stan,ar, value are as 5ello& for ?i4A@ an, +TE

,ual o,e sites

ALDPwrSwitc,/1:ALDPwrSwitc,/

O;er)urrAl')lrT,res,l/180:O;er)urrAl')lrT,res,l/

O;er)urrAl'OccT,res,l/200:O;er)urrAl'OccT,res,l/


59/77


8ner)urrAl')lrT,res,l/15:8ner)urrAl')lrT,res,l/

8ner)urrAl'OccT,res,l/10:8ner)urrAl'OccT,res,l/

3(a


60/77


. 2n the ilter,ialog unchec )leareon the Base Settingta5.

#. 6n the Alar )ource ta5 select Ob


61/77


12 nae Access (arrin# 0f Re=uire'

uring the configuration an, soft&are upgra,e of the e;o,e( the:0 transission &as ,isa5le,. The sectors ust no& 5e ena5le, inor,er to perfor fiel, vali,ation. 0ollo& the follo&ing steps

. )elect (aintenance./((L )o''an.

". 2n the ;E tree select the e;o,e( to 5ring up the 44+coan, interface.

B. Execute the follo&ing coan, for each cell an, tracingarea

46 3E++6/ +63A+3E++2MGcell i,HT:A3K2;-A:EA2MGtracing area i,H3E++:E)E:LE06:6/M3E++P:E)E:LEP06:P6/N


62/77


13 >erif!in# "perationa +tatus

After the coissioning is coplete the e;o,e( status ust 5everifie, 5efore perforing ,rive tests. :efer to Huawei DBS3900LTE Li'ite ATP guie an Huawei DBS3900 LTE ull ATP guie%


63/77


14 (ac&up e%o'e( *onfi#uration

After har,&are an, :0 configuration is coplete follo&ing the nextsteps to 5acup the e;o,e( configuration.

1. )elect (aintenance./Bac4up (anage'ent./E Bac4up.

. )elect the e;o,e( for 5acup an, clic the Bac4up5utton.

#. 3onfir the 5acup execution.

$. )elect the e;o,e( ro& in the ;E 5acup list an, clic theDownloa To O() )lient5utton. This saves theconfiguration file to 7our local client.


64/77



65/77


15 )sefu e%o'e( - *oan's

The follo&ing coan,s a7 5e useful for trou5leshooting.

3oan, escription

)/ 3/:2/6:T 3hecs the fi5er port.

)/ )?: :eports the s7ste L)?: fro the ::U.

)/ (:LE: ispla7s the 5oot:64 an, application soft&are for thein,ivi,ual 5oar,s. Also ,ispla7s the har,&are version.

+)T A+4A0 +ists the active alars .

+)T )60T?A:E +ist the ain soft&are pacage on the e;o,e(.

+)T ::U +ists the nu5er of ::U an, their su5rac assignents.

+)T (: +ists ((U chassis slot assignents.

EA 3E++

A3T 3E++

Use, to ena5le,isa5le transission of a sector orcarrier.

/2;- Use, to ping fro the e;o,e(.

U+K U): 2f the +4T user is loce, out ,ue to too an7 faile, loginattepts this coan, can 5e use, to unloc the user.


66/77


16 *e Data A'?ustent an' %ei#horin#*onfi#uration

2f neigh5oring ,ata is not rea,7 ,uring coissioning 7ou can a,,neigh5oring ,ata after coissioning. Dou can also use thisproce,ure to a,Cust cell ,ata if necessar7.

1. 3reate a planne, area.

3hoose 4***=H34 Express=H /lanne, Area=H3reate/lanne, Area.

0ill out /lanne, Area ;ae. 3lic e;o,e( an, clicto choose e;o,e( fro current area. 3lic 6K.

. 3hoose 34 Express=H+TE Application=HExport ata=HExport:a,io ;et&or /lanning ata.

3lic e;o,e( an, clic to choose e;o,e( froplanne, area. 3lic ;ext.


67/77


#. Keep ,efault setting as follo&ing an, clic ;ext.

$. 3hec 3ell EutranExternal3ell an, Eutran2ntra0req;3ell.3lic ;ext.


68/77


. 3lic to set 0ile /ath. 3lic ;ext.

". 3lic 0inish.


69/77


B. E,it file exporte,.

8. 3hoose 34 Express=H+TE Application=HExport ata=H2port :a,io ;et&or /lanning ata.

3lic A,, to select file e,ite,. 3lic ;ext.

9. 3hec ;E an, clic ;ext.


70/77


1*.After iporting ,ata is ,one clic 0inishe,.


71/77


11.3hec the e;o,e( configuration ,ata.

3lic select e;o,e( an, clic O+%The progress 5ar is ,ispla7e,. 2f the ,ata vali,ation ,oesnot succee, change the configuration ,ata as propte,until the vali,ation succee,s.

1.3lic to export increental scripts.


72/77


1#.3lic to export increental scripts.

1$.)et )cript Executor 6peration as follo&ing. 3lic 6K.

1./rogress 5ar sho&s in )cript Executor.


73/77



74/77


Appen'i; A Defaut *onfi#uration Recover!

2f the configuration of the e;o,e( 5ecoes corrupt 7ou canrecover the ,efault configuration in or,er to re=atteptcoissioning. The follo&ing steps &ill activate the ,efaultconfiguration reset the e;o,e( an, then start the %3/ process.

1. )elect (aintenance./((L )o''an.

. 2n the ;E tree select the e;o,e( to 5ring up the 44+coan, interface.

#. Execute the follo&ing coan, to activate the ,efaultconfiguration an, reset the e;o,e(.

A3T 30-02+E46M42;24U4P36;02-E0TM244E2ATE+DN


75/77


$. 3hoose 3onfiguration=HAuto eplo7ent=He;o,e( Autoeplo7ent.

. :ight clic coission tas in Deplo'ent List chooseDelete.

". 3lic 5es.

B. 3lic 5es.


76/77


8. 3lic Prepare ile=Data clic E )on#iguration Data.

)elect the ol, configuration file recor, an, clic Delete.

9. 3lic Prepare ile=Data clic Deplo'ent List.

)elect the ol, ,eplo7ent list an, clic Delete.

1*.3hoose Topolog./(ain Topolog%


77/77


11.elete e;o,e( in topolog7.

1.:e,o ".B /repare 3oissioning Tas an, B 3oissioning.

Documents

Huawei DBS3900 LTE Network