Embed Size (px)
DESCRIPTION
https://www.uponor.dk/~/media/countryspecific/denmark-infra/download-centre/godkendelser/insta-cert-4019-tryk-og-profuse_vand_fristad_se.pdf?version=5
Citation preview
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4019-23
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
PE tryckrör för att leda vatten och avloppsvatten enligt Bilaga 1. Godkända råmaterial enligt Bilaga 2 (konfidentiell). Besiktning av tillverkningstället: SP F319916
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Fristad, Sverige
SBC 12201
EN 12201-1
2004-11-29
Annex 1 Page 1 (1) Licence of certification No. 4019-23 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
PE-tryckrör för att leda vatten och avloppsvatten
RÖR: Produkt namn Färg PE beteckning Standard dimension Dimensioner, mm - storleksgrupper 1 - 3 Standard dimension Dimensioner, mm - storleksgrupper 1 - 4 PE beteckning Standard dimension Dimensioner, mm - storleksgrupper 1 - 3 Standard dimension Dimensioner, mm - storleksgrupper 1 - 3 Produkt namn Färg Fog PE beteckning Standard dimension Dimensioner, mm - Storleksgrupper 1 - 3 Standard dimension Dimensioner, mm - storleksgrupper 1 - 3 Standard dimension Dimensioner, mm - storleksgrupper 1 - 3 Tillverkarens beteckning på produkter
Uponor tryckrörssystem PE PE 80 svart med blåa eller bruna sträckor SDR 11 16 - 630 SDR 17 16 - 710 PE 100 svart med blåa eller bruna sträckor SDR 11 16 - 630 SDR 17 16 - 630 PROFUSE PE 100 blå-svart eller rödbrun-svart stumfog och elsvetningsfog PE 100 SDR 11 16 - 630 SDR 17 16 - 630 SDR 26 16 - 630 5
Test rapporter och andra referensdokument: SP P003425 DnV 153.326.1-02C SP F600868, SP F612207, SP F623411 SP F901611 VTT-S-00653-11 SP/KP60 -typgodkännelse (15.8.2005) SP F626693, SP 97H23702 VTT-S-10871-07 SP/KP60 -typgodkännelse (12.11.1997), SP F721639 SP F901613, SP F901612 SP F300838 SP F311847 SP F303325 SP F319916 VTT/RTE551/02 SWP F308475C SP P008448A SP FX004278C
