2
LICENCE OF CERTIFICATION Date: No./Version: First version granted: Licensee’s name and address Marks covered by licence: Information regarding licensee/manufacturer Licensee’s technical officer Telephone Telefax Email Manufacturer Place of manufacture Product covered by the licence Type of product Standard/Other normative document Specific rules Specification of product The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA- CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products. The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable. MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director 2013-07-01 4032-03 Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Plaströrsystem - Plaströr för avlopp (låg och hög temperatur) inomhus - Rör och rördelar av PP enligt bilaga 1. Godkända råmaterial och tätningar enligt bilaga 2 (konfidentiell). Jaana Hallikas + 358 20 129 211 + 358 20 129 210 [email protected] Plastic pipes Kausala, Finland SBC 1451 EN 1451-1 2005-11-08

Insta cert 4032 afloeb bygninger pp 2008

Embed Size (px)

DESCRIPTION

https://www.uponor.dk/~/media/countryspecific/denmark-infra/download-centre/godkendelser/insta-cert-4032-afloeb-bygninger-pp-2008.pdf?version=3

Citation preview

Page 1: Insta cert 4032 afloeb bygninger pp 2008

LICENCE OF CERTIFICATION

Date: No./Version:

First version granted:

Licensee’s name and address Marks covered by licence:

Information regarding licensee/manufacturer

Licensee’s technical officer

Telephone

Telefax

Email

Manufacturer

Place of manufacture

Product covered by the licence

Type of product

Standard/Other normative document

Specific rules

Specification of product

The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.

The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transmittable.

MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director

2013-07-01 4032-03

Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

Plaströrsystem - Plaströr för avlopp (låg och hög temperatur) inomhus - Rör och rördelar av PP enligt bilaga 1. Godkända råmaterial och tätningar enligt bilaga 2 (konfidentiell).

Jaana Hallikas + 358 20 129 211 + 358 20 129 210

[email protected]

Plastic pipes

Kausala, Finland

SBC 1451

EN 1451-1

2005-11-08

Page 2: Insta cert 4032 afloeb bygninger pp 2008

Annex 1 Sivu 1 (1) Licence of certification No. 4032-03 Date 2013-07-01

Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

RÖR: Rörtyp Rörserie Användningsområde Dimensioner, mm - storleksgrupp 1 RÖRDELAR: Produktnamn Rördelsgrupp Rörserie Användningsområde Dimensioner, mm - storleksgrupp 2 Rördelsgrupp Rörserie Användningsområde Dimensioner, mm - storleksgrupp 2 Tillverkarens beteckning på produkter

muffrör, vit S16 B 32 – 50 UPONOR HTP Böjar S16 BD 75 – 160 Andra S16 BD 75 - 160 B1

TEST RAPPORTER OCH ANDRA REFERENSDOKUMENT: SP F813915C SP F813915A INSTA-CERT -licens 4010-01 VTT/RTE3275/05 VTT/RTE3022/05 VTT/RTE3360/05 VTT/RTE2738/03