Upload
daniel-mora-balta
View
215
Download
0
Embed Size (px)
Citation preview
8/11/2019 j Pulse Gateway 4.1R0 Qsg
1/2
Junos Pulse Gateway MAG2600 Quick Start
530-036743 Rev 01
Use the instructions in this quick start to help you connect the Junos Pulse Gateway
MAG2600 to your network.
MAG2600 Front Panel
MAG2600 Back Panel
Connecting and Configuring the MAG2600
Perform the following tasks to connect and set up the MAG2600. To determine the status
of the device, observe the LEDs on the front panel.
Task 1: Connect the Power Cable to the MAG2600
To connect the MAG2600 to the power supply:
1. Plug the DC connector end of the power cable into the power connector located onthe side of the MAG2600.
2. To secure the power cable, slide it through the cable retention clip.
3. Plug the AC adapter end of the power cable into an AC power outlet.
CAUTION:We recommend using a surge protector for the power connection.
Note the following indicators on the front panel:
POWER LEDs: Solid green when device is receiving power.
ACTIVITY LED: Blinks yellow when hard drive is being accessed.
ALARM LED: Solid red when a major hardware problem has occurred. Blinks redwhen the fan has stopped.
IMPORTANT:Allow the MAG2600 3-5 minutes to boot up after you power it on.
Task 2: Connect the Management Device
The MAG2600 has the following port assignments:
Connect the management device to the MAG2600:
Connect an Ethernet cable with RJ-45 connectors from Port 0 (internal port) on theMAG2600 to a Gigabit switch port set to auto-negotiation.
Connect an RS-232 serial cable to the port labeled CONSOLE on the MAG2600.This cable connects to the serial port on the management device.
If you are using Enterprise Guest Access, connect Port 1(external port) to the guest
network. For information about Enterprise Guest Access for the MAG2600, see the UAC
Guest Access License Guide.
Callout Description
1 Console port2 Ethernet ports 0 & 1
3 USB port
4 LEDs (POWER, ACTIVITY, ALARM)
5 Power button
Callout Description
1 Power supply retention clip
g039100
1 2
3
4 5
1
Port Number Description
0 Internal
1 External
8/11/2019 j Pulse Gateway 4.1R0 Qsg
2/2