3
Page 1 of 3 J AY J ANI Mobile: +919428008767 Email: [email protected] Workover Co-ordinator & Safety Officer: Dedicated and sincere engineer with an experience of over 4 years in O & G production engineering. Graduated in petroleum engineering. Worked on both onshore and offshore processing platforms. Co-ordinating workover jobs. Enthusiastically holding the responsibility of safety officer at a workover rig. Professional Experience: ONGC Ltd. (June, 2013 – Present): Assistant Executive Engineer (Production) Co-ordinator & Safety Officer – Workover Rig (July, 2015 – Present): Co-ordinate with rig crew for carrying out all kinds of workover operations in Mehsana Asset according to well plan. Devised rig specific casing rope slip, cut and lubrication policy. As a result, achieved longest life in the history of the workover rig, reducing annual casing rope cost by 50%. Inventory management and planning. Inter-location movement (ILM) planning. Through systematic planning of rig transportation reduced avg. ILM hours by 20 hours/well, thereby increasing workover index. Achieved highest workover index ever for the stated workover rig. Continuously initiate and induct new measures/technology to improve operational efficiency and safety. Reduce time loss, optimise material consumption and achieve better cost efficiency. Achieved 500 days of accident-free operations. Carried out maximum safety drills amongst all workover & drilling rigs in Mehsana asset in the year 2015-16. Inducted BOP & accumulator blind ports, reducing hydraulic oil consumption by 20%. Fabricated hopper for better pill preparation and reduced chemical exposure to rig crew. Complete compliance to all statutory norms, record safety observations, carry out analysis of various incidents and discuss with the crew to maintain utmost safety standards. Achieved 100% compliance to DGMS and all other external audit observations. By preparing a protective box for storing BOP control unit hydraulic lines, increased life of lines by 30%.

Jay Jani_CV - ONGC

Embed Size (px)

Citation preview

Page 1: Jay Jani_CV - ONGC

Page 1 of 3

JAY JANI Mobile: +919428008767

Email: [email protected]

Workover Co-ordinator & Safety Officer:

Dedicated and sincere engineer with an experience of over 4 years in O & G production engineering. Graduated in petroleum engineering. Worked on both onshore and offshore processing platforms. Co-ordinating workover jobs. Enthusiastically holding the responsibility of safety officer at a workover rig.

Professional Experience:

ONGC Ltd. (June, 2013 – Present): Assistant Executive Engineer (Production)

Co-ordinator & Safety Officer – Workover Rig (July, 2015 – Present):

Co-ordinate with rig crew for carrying out all kinds of workover operations in Mehsana Asset according to well plan.

Devised rig specific casing rope slip, cut and lubrication policy. As a result, achieved longest life in the history of the workover rig, reducing annual casing rope cost by 50%.

Inventory management and planning. Inter-location movement (ILM) planning. Through systematic planning of rig

transportation reduced avg. ILM hours by 20 hours/well, thereby increasing workover index. Achieved highest workover index ever for the stated workover rig.

Continuously initiate and induct new measures/technology to improve operational efficiency and safety. Reduce time loss, optimise material consumption and achieve better cost efficiency. Achieved 500 days of accident-free operations. Carried out maximum safety drills amongst all workover & drilling rigs in Mehsana asset in the year 2015-16.

Inducted BOP & accumulator blind ports, reducing hydraulic oil consumption by 20%. Fabricated hopper for better pill preparation and reduced chemical exposure to rig crew.

Complete compliance to all statutory norms, record safety observations, carry out analysis of various incidents and discuss with the crew to maintain utmost safety standards. Achieved 100% compliance to DGMS and all other external audit observations.

By preparing a protective box for storing BOP control unit hydraulic lines, increased life of lines by 30%.

Page 2: Jay Jani_CV - ONGC

Page 2 of 3

Technical Cell Officer (July, 2015):

Compilation of field Daily Production Reports (DPRs), analysis and monitoring of DPRs, monthly reports & MIS. Uploading of DPRs into SAP system.

Preparation of time loss, non-productive loss, time balance statements, rig scheduling & rig movement plans.

Preparation and compilation of well completion reports & well cost planning. Ensure compliance to all audit observations. Co-ordinating with Chief Well Services.

Asst. Shift Incharge & Safety Officer - Workover Rig (June, 2013 – July, 2015):

Carrying out workover operations such as installation & repairing of artificial lift, packer setting, well activation, zone transfer, sand control, water control, well stimulation, water injection, well control and managing workover rig operations such as rig building, rig transportation, maintenance, etc.

Held the responsibility of Rig Safety Officer. Achieved accident free operations during complete tenure.

Preparing DPR, Well Completion Report, QHSE documents, etc. Worked on Russian & Romanian rig.

Cairn India Ltd. (June, 2012 – June, 2013): Graduate Trainee in Production Operations

Held the responsibility of an Area Engineer in a processing plant. Implemented e-Permit to Work (e-PTW) system for the 1st time at the plant. Drafted

e-PTW procedures. Day to day monitoring of Oil & Gas gathering station, separators, heat exchangers,

gas compression unit, dehydration unit, dew point control, effluent treatment and other surface operations.

Monitoring of unmanned offshore platform operations and carrying out wellhead operations at the offshore platform.

Preparation of QHSE documents. Maintaining thorough compliance to all safety standards by continuous observations, incident reporting, efficient maintenance, etc.

Academic Qualifications:

Qualification Month & Year of Passing

School/College Board/University Percentage/ CPI

B.Tech in Petroleum

Engineering May, 2012

School of Petroleum

Technology

Pandit Deendayal Petroleum University

(PDPU) 7.76

Page 3: Jay Jani_CV - ONGC

Page 3 of 3

Projects: Completed a project on “Sand Control” as a part of Specialized Training at ONGC’s

institute IOGPT, Panvel in March, 2014. Completed final year B.Tech project “Evaluation of Hydrocarbon potential of a

lease in Assam Arakan Basin using 3D seismic and well log data” under the guidance of Prof. Anirbid Sircar and Prof. G.P. Karmakar.

Completed a project on “Well Logging & Data Interpretation” at ONGC Mehsana under the mentorship of Dr. R.L. Singh, DGM (W) in May-June, 2011.

Computer Skills: Proficiency in Microsoft Office, C, C++, MATLAB, SAP, Kingdom Suite, SolidEdge

and SolidWorks.

Achievements:

Achieved highest workover index in the history of a workover rig. Also, completed ILM in shortest time for the financial year 2015-16.

Completed IWCF – WIP training with an average score of 91. Completed IADC Well Cap training with an average score of 97. Member of e-PTW testing committee in Cairn India. Implemented e-PTW procedure

as an ‘e-Permit Champion’ at Cairn’s Hazira site. Production Engineer on an offshore drilling rig for one week as a part of Cairn’s

production team. Extra-Curricular Activities:

Member of Society of Petroleum Engineers (SPE) and member of Society of Exploration Geophysicist (SEG). Member of AIESEC, a UN recognized youth organization.

Judged technical poster presentation at SPE event in 2015. Participated in climate leadership training program ‘Pranaya’ held by Indian Youth

Climate Network (IYCN) and Young Indians (YI) in 2009. Tritiya Sopan Pass Scout.

Personal Details:

Date of Birth 25.11.1990 Address 46, Pineapple Bunglows, Opp. McDonald’s, Nr. Tapovan Circle,

Chandkheda, Ahmedabad, 382424. Languages known English, Hindi and Gujarati.

Hobbies Reading novels, photography.

Alternate Email ID [email protected]