Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Kontroller,
der sikre et behageligt indeklima samt energibesparelser
Produal-controllerne anvendes i vid udstrækning i forskellige kommercielle og offentlige anlæg og giver mulighed for at få en optimal styring af rumklimaet. Ved at sikre en alsidig og præcis registrering, der kan reguleres efter behov, får hotelgæster, kontorpersonale, publikum eller patienter det bedst mulige indeklima. Controllerne har tre justerbare driftsindstillinger (dag, nat og sparefunktion) og sparer også på energiforbruget uden at gå på kompromis med komforten ved indeklima. I moderne, intelligent byggeri skal der kun anvendes opvarmning, køling, behagelig ventilation og fan coils, når der er behov for det. Dette sikrer omkostningseffektivitet og minimerer den globale miljøpåvirkning.
Vi arbejder sammen med dig om at designe gennemprøvede rumløsninger til projekter og leverer fremragende serviceydelser ved hjælp af vores omfattende udvalg af rumcontrollere, der er lette at installere. Det giver mulighed for intelligent styring både nu og i fremtiden.
Transmittere med
styringsudgang
Controlleretil skjult
montering
Rumenheder
Rum controllere
Universalcontrollere
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
Højteknologiske controllere
til alle typer anvendelser inden for bygningsautomatik
Vores ekspertise viser sig i form af et stort udbud af multifunktionelle og driftssikre controllere, der kan bruges til varme/køleflader, radiator, fan coils, VAV mv. Vores produkt kan bruges til at styre et enkelt rum eller en zone, kan integreres med intelligente systemer til bygningsautomatik og har fuld interoperabilitet med den overordnede bygningsstyring, og det gælder både anvendelser i stor og lille skala. Vores udvalg og design appellerer til et budget af enhver størrelse.
1. Controllere til skjult montering og rumenheder• Controllere til montering ved nedsænket loft
eller anden skjult montering• Færre kabler gennem vægge• Forskellige rumenheder til forskellige behov• Mulighed for flere rumenheder
2. Rum controllere• Alle forbindelser i samme enhed• Der er et stort udvalg af
rumcontroller som dække de fleste behov i rum/zoner
• Der er mange følertyper og betjeningsmuligheder, dette giver et utal af funktioner
3. Universal controllere• Controllere til mange forskellige
anvendelsesområder• Styring af opvarmning, ventilation, tryk,
luftfugtighed eller andet• Fås med forskellige funktioner til forskellige
anvendelser4. Transmittere med indbygget regulering
• PI regulator til styring af en udgang, samt aktive transmitter udgang
• Styring af spjæld, køleaktuator direkte fra transmitteren• Tilføjelsesmuligheder, der giver flere funktioner
2.
3.
4.
1.
Controllere til skjult montering og rumenheder
Den avancerede C2xx-produktserie af controllere er beregnet til at gøre det nemt at udfører installationer over nedsænket loft, fan coil-enheder eller anden skjult montering og giver derudover større fleksibilitet. Al kabelføring sker til controlleren, og muligheden for flere funktioner betyder, at en rumcontroller kan bruges til forskellige ting. Derudover kan alle styringsparametrene konfigureres, og det gør, at C2xx-serien nemt kan tilpasses i forhold til fremtidige behov.
Vores udvalg af rumenheder giver mulighed for brugervenlige anvendelsesmuligheder i høj klasse eller blot enkle, men stilfulde løsninger. Ved at kombinere forskellige sensorer i ét kabinet er der ikke behov for separate sensorer i rummet. Enhederne har en brugervenlig grænseflade med indstillingsmuligheder, der kan vælges, afhængigt af rummets krav. Dette gør systemet fleksibelt og
1
Anvendelse på hotelværelser med fan coil og kaskadestyret gulvvarmeC230 styrer en 3-trins fan coil-enhed med opvarmning, køling og en spjældaktuator til sekventiel ventilation/køling. Det opvarmede gulv styres med en 0...10 V aktuator med laveste og højeste grænser, der afhænger af værelsets samlede varmebehov. Nøglekortskontakten skifter controllerens driftstilstand mellem natindstilling (til energibesparelse) og dagsindstilling (komfort).
Kontakt din sælger hos Produal vedrørende andre anvendelsesmuligheder
Eksempler på anvendelsesmuligheder :
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
1
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
4
4
3
2
Anvendelse til mødelokale med fan coilC230 styrer en 3-trins fan coil-enhed med køling og en VAV spjæld til ventilation, hvis CO2-værdien er for høje, eller hvis der er behov for køling. Opvarmning styres med radiatorer. PIR føleren har en aktivudgang, der skifter controllerens driftstilstand mellem natindstilling (til energibesparelse) og dagsindstilling (komfort).
Anvendelse til mødelokale med køleflade og radiatorer C221 styrer fladen med køling og en VAV spjæld til ventilation, hvis CO2-værdierne er for høje, eller hvis der er behov for køling. Opvarmning styres med radiatorer. PIR-tilstedeværelsessensoren skifter controllerens driftstilstand mellem natindstilling (til energibesparelse) og dagsindstilling (komfort).
Anvendelse på hotelværelser med fan coil og kaskadestyret gulvvarmeC222 med RL203 styrer en 3-trins fan coil-enhed med opvarm-ning, køling og en spjældaktuator til sekventiel ventilation/køling. Det opvarmede gulv styres med en 0...10 V aktuator med laveste og højeste grænser, der afhænger af værelsets samlede varmebehov. Nøglekortskontakten skifter controllerens driftstil-stand mellem natindstilling (til energibesparelse) og dagsindstil-ling (komfort).
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
3
2
Kontakt din sælger hos Produal vedrørende andre anvendelsesmuligheder
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
2
C2xx-produktserien er beregnet til skjult montering. C221 kan udvides til spjæld med til/fra-funktion i 3 trin og C222 til 3-trins fan coils med RL203-relæenhed. C230 har indbyggede relæer til spjæld med til/fra-funktion i 3 trin eller 3-trins fan coil-enheder. Controllerne er forsynet med 2 x 0...10 VDC udgange, 2 x 24 VAC udgange eller 230 VAC (C230) udgange og 3 x 0...10 VDC/NTC10/kontakt/resistive indgange. C230 har en ekstra indgang udelukkende til registrering af tilstedeværelse eller en nøglekortskontakt. I/O-funktionerne kan tilpasses til forskellige funktioner. Controlleren har indbygget, galvaniseret isoleret RS-485-kanal til kommunikation via Modbus og kan forbindes til alle BMS systemer, der understøtter Modbus RTU. C221 og C222 leveres med 24 VAC og C230 med 230 VAC. Basismodellerne kan suppleres med rumenheder til en komplet rumløsning.
C221-01 1155050 -controller
C222-01 1155060 -controller med relæstyringsport
C230 1155110 -controller til rumtemperatur (230 V)
ROU-S 1150380 -rumbetjeningsenhed (overflademontering)
ROU-F 1150390 -rumbetjeningsenhed (indbygget montering)
ROU-PIR-opt 1150381 PIR-sensor (ekstraudstyr), til tilstedeværelsesregistrering
ROU-S-CO2-opt 1150382 CO2-sensor (ekstraudstyr), gælder kun ROU-S
ROU-RH-opt 1150383 -ekstraudstyr til luftfugtighed
Rumenhed med berøringsfølsom skærm og modbus. Skal bruges sammen med C2xx-serien eller kun som en modbus-slave. ROU har en innovativ og nem brugergrænseflade, og visse symboler kan holdes skjult for brugeren. Den automatiske pauseskærm sparer på strømmen. Tilføjelsesmoduler fås som ekstraudstyr, der giver flere funktionsmuligheder.
E121-01 1155080 -rumenhed (sætpunktspotentiometer og -timer)
E122-01 1155081 -rumenhed (sætpunktspotentiometer + kontakt til styring af ventilatorhastighed)
E123-01 1155082 -rumenhed (sætpunktspotentiometer + -timer)
En enkel rumenhed med en ekstra knap til tvungen udgang eller midlertidig dagstidstimer (1-5 t).
E201-01 1155090 -rumenhed med display
En enkel rumenhed med et display og 2-knaps funktion til justering af sætpunkt. Låget skjuler funktionsknapperne, så du ikke ved et uheld kommer til at trykke på indstillingsknapperne. I E201 er der adgang til indstillings- menuerne til konfiguration eller parameterændringer.
E202-01 1155091 -rumenhed med display og styring af ventilatorhastighed
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
Rumcontrollere
Rumcontrollere i HLS- og R-serien er fleksible og har al intelligens og alle tilslutninger i samme enhed. Disse modeller fås både til avancerede styringsbehov, hvor der er flere funktionsmuligheder, og til enklere behov, der også er billigere. Afhængigt af rumkravene kan controllerne tilpasses eller justeres, så de passer til de fleste styringsbehov, og de dækker både busprodukter og analoge produkter. Alle styringsparametrene kan konfigureres, og det gør det meget nemt at tilpasse enhederne til dine fremtidige behov.
Rumanvendelse med fan coil, radiatorer, køleflade og CO2 -sensorHLS 44 styrer en fan coil-enhed med opvarmning, køling og en spjældaktuator til ventilation/køling efter hinanden. En spjældaktua-tor åbner for ventilation, hvis CO2-værdierne er for høj, eller hvis der er behov for køling. Nøglekortskontakten skifter controllerens driftstilstand mellem natindstilling (til energibesparelse) og dagsindstilling (komfort).
Anvendelse til mødelokale med køleflade og radiatorer HLS 44-CO2 styrer fladen med køling og en VAV spjæld til ventilation, hvis CO2-værdien er for høj, eller hvis der er behov for køling. Opvarm-ning styres med radiatorer. PIR-tilstedeværelsessensoren skifter controllerens driftstilstand mellem natindstilling (til energibesparelse) og dagsindstilling (komfort).
6
5
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
Eksempler på anvendelsesmuligheder :
5
6
Kontakt din sælger hos Produal vedrørende andre anvendelsesmuligheder
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
HLS 44 1150250 -controller til rumtemperatur
En avanceret, multifunktionel controller specielt designet til individuel rumtemperatur og zonekontrol. Controlleren understøtter 0...10 V-styrede aktuatorer, ventilatorhastighed og termiske aktuatorer samt VAV spjæld med 0...10V indgang. Controlleren har indbygget, galvaniseret isoleret RS-485-kanal til kommunikation via Modbus og kan forbindes til alle BMS systemer, der understøtter Modbus RTU.
Der er også mulighed for flere HLS 44-variationer som f.eks. HLS 44-CO2 med en indbygget CO2-sensor, HLS 44-EC med indstillelig spænding for styringsudgang til ventilatorhastighed, HLS 44-V til fan coil VAV og lysstyring, HLS 44-3P til 3-punkts aktuatorstyring, HLS 44-6W til 6-vejs ventilstyring, HLS 44-BAC med BACnet-kommunikation og HLS 45 til både 2-rørs fan coil units og anvendelsesmuligheder til gulvvarme og -køling.
Derudover er der også mulighed for en enkel 1-trins controller, HLS 16, 2-trins controller, HLS 21, og 2- eller 3-trins controller, HLS 33.
RS102-01 1155030 -rumcontroller
En alsidig controller, der er specielt designet til individuel rumtemperatur og VAV. En ekstra knap til at gennemtvinge en udgang i 2 timer kan være nyttig i mødelokaler osv. Controlleren understøtter 0...10 V styrerede aktuatorer, termiske aktuatorer og 0...10 V styrede spjæld.
R402 1155120 -rumcontroller
En alsidig rumtemperaturcontroller til individuel rumtemperatur og VAV-styresystemer. Controlleren understøtter 0...10 V-styrede aktuatorer og termiske aktuatorer samt 0...10 V-styrede spjæld. Controlleren kan for-bindes til ethvert system, der understøtter Modbus RTU-protokollen, ved at bruge RS-485-forbindelsen. Bussen er galvanisk isoleret fra controlle-rens anden elektronik.
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
Universalcontrollere
PDS- og HS-universalcontrollere har mange anvendelsesmuligheder. Parametrene kan tilpasses til forskellige typer styring af opvarmning, ventilation, tryk og fugtighed eller andre anvendelsesmuligheder. Universalcontrollerne fås med forskellige funktioner afhængigt af anvendelsen.
Styring af ventilation med HS 2.2HS 2.2 styrer spjældaktuatoren for at bevare et konstant lufttryk.
Styring af opvarmning med radiatorer, temperatursensor til udendørs brug, sensor til opvarmning af vand og sensor til rumtemperaturPDS 2-H styrer temperaturen på det indgående vand i radiatoren afhængigt af sætpunktet, udendørstemperaturen ogindendørstemperaturen. Styringen af aktuatoren sker med en justerbar styringskurve, der giver optimal ydeevne.
8
7
Modbus 0-10V Actuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500pressure transmitter
24V AC
Eksempler på anvendelsesmuligheder :
CO2-sensorTemperatursensorSætpunktsgrebPIR-sensor
HDH-PIR-PU-R
E122 Rumenhed
Modbus
230V AC
Aktuatorer 230V AC
Actuator 230V AC
FAN COIL
RADIATOR
Køling
Opvarmning
0-10V Actuator
Conference room application with fan coil:C230 controls a 3-speed fan coil unit with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor built-in the active transmitter changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Modbus
230V AC
Aktuatorer 230V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C230 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C230Controller
Nøglekortskontakt
C230Controller
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
CO2 sensorTemperatursensor
Modbus
24V AC
Actuator 24V AC
Actuator 24V AC
RADIATOR
Køling
Opvarmning
0-10V Aktuator
Conference room application with chilled beams and radiators:C221 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
C221Controller
Rumbetjeningsenhedd
Modbus
24V AC230V AC (fan coil)
Aktuatorer 24V AC
FAN COIL
Køling
Opvarmning
0-10V Aktuator
Hotel room application with fan coil and cascade controlled floor heating:C222 with RL203 controls a 3-speed fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. The heated floor is controlled with a 0-10V actuator within minimum and maximum limits depending of the total heating demand of the room. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Nøglekortskontakt
Sensor til gulvtemperatur
Opvarmning af gulv0-10V DC
Rumbetjeningsenhed
Modbus
24V AC
Modbus
24V AC
Aktuatorer 0-10V DC
0-10V DC EC-MOTOR FAN COIL
Køling
Opvarmning
0-10V Aktuator
Room application with fan coil, radiators, chilled beams and CO2 sensor:HLS 44 controls a fan coil unit with heating, cooling and a damper actuator for ventilation/cooling in sequence. A damper actuator opens for ventilation if the CO2 value are too high, or if there is a cooling demand.. The key card switch changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Heating control with radiators, outdoor temperature sensor, heating water sensor and room temperature sensor:PDS 2-H controls the incoming water temperature in the radiator depending on the set point, outdoor temperature and indoor temperature. The control of the actuator is made with an adjustable control curve for optimal performance.
Nøglekortskontakt
HDH CO2 sensor
PIR-sensor
Modbus
24V AC
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
Køling
Opvarmning
RADIATOR
0-10V Aktuator
Conference room application with chilled beams and radiators:HLS 44-CO2 controls chilled beams with cooling and a damper actuator for ventilation if the CO2 value are too high, or if there is a cooling demand. Heating is controlled with radiators. The PIR occupancy sensor changes the operation mode of the controller between night mode (for energy saving) and day mode (comfort).
Aktuator 24V AC
Aktuator 24V AC
RADIATOR
CHILLED BEAMKøling
Opvarmning
PIR-sensor
C221Controller
RL203Relæudvidelse
HLS 44-CO2Controller
TEHR PT 1000Rumtemperatur-
sensorPDS 2-H
TEU PT 1000Temperatursensor
til udendørs brug
TEAT PT 1000Vandtemperatur-
sensor ved opvarmning
Modbus 0-10V Aktuator
Ventilation control with HS 2.2:HS 2.2 controls the damper actuator to keep a constant air pressure.
PEL 2500Tryktransmitter
24V AC
7
8
Kontakt din sælger hos Produal vedrørende andre anvendelsesmuligheder
PDS 2 1150120 -controller
En temperaturcontroller til anvendelse til lufthåndteringsenhed, varmt vand i beboelser og opvarmning. Controlleren understøtter Pt1000-temperatursensorer. De termiske aktuatorer kan have enten 0...10V styring eller 3-punktsstyring. Idriftssættelser og indstillinger foretages ved at bruge indbygget display og knapper. Controlleren har en RS-485-forbindelse til Modbus RTU-kommunikation.
PDS 2.2 1150150 -universalcontroller
En universalcontroller, der kan bruges til styring af tryk, differentialtryk, luftfugtighed og temperatur. Indgang for PDS 2.2 gælder et 0...10 V signal. Aktuatorerne kan være 0...10 V-styrede 3-punkts- eller termiske aktuatorer. Idriftssættelser og indstillinger foretages ved at bruge indbygget display og knapper. Controlleren har en RS-485-forbindelse til Modbus RTU-kommunikation.
HS 2.2-M 1150290 -universalcontroller, rumhus
En universalcontroller til HVAC-anvendelser. Controlleren kan anvendes til styring af f.eks. tryk, differenstryk, temperatur eller belysningsniveau. Controlleren kan forbindes til ethvert system, der understøtter Modbus RTU-protokollen, ved at bruge RS-485-forbindelsen. Bussen er galvanisk isoleret fra controllerens anden elektronik.
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
Transmittere med styringsudgang
Produal-transmitterne kan også bruges som controllere med enkelt sekvens til opvarmning/køling og ventilation.
I tabellen herunder kan du se en liste over vores transmittere med styringsudgang og relaterede funktioner.
Få flere oplysninger ved at se afsnittet om transmittere online eller i vores produktkatalog.
Transmittere med regulator udgang
HD
H, H
DK
, H
DU
ILH
, IL
K
IML
KLH
KLK
LLK
, LU
K
PEL
1000
KPEL
, K
PEL
9K
TEAT
TEH
R
TEK
TEK
A
TEK
V
TEK
Y
TEN
A
TEP
TEPK
TEU
TEV
Reg
ulat
or
udga
ng 4...20 mA • • • • • • • • • • • • • •
0...10 V • • • • • • • • • • • • • • • • • • •
Funk
tion
Control ramper 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Control modes P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI
Køle rampe • • • • • • • • • • • • • • •Varme rampe • • • • • • • • • • • • • • • •
CO2 styring •VOC styring •Fugt styring • • • •Tryk styring • • •
Modbus • • • • • • • • • • • • • • •BACnet •
Controllerudgangene kan forsynes med relæer og forskellige signaltransformere eller signalopdelere. Vi har et bredt udvalg af systemkomponenter, der fuldender funktionaliteten.
For at sikre, at idriftsættelsen af controllerne er nem, har vi forskellige værktøjer, der giver adgang til controllerens indstillinger, så de kan konfigureres. H203 er et idriftsættelsesværktøj til C2xx-controllere. Tilslut idriftsættelsesværktøjet direkte til styringsenhed eller via en E12x-rumenhed. I H203 er der mulighed for adgang til indstillingsmenuerne til konfiguration eller parameterændringer. HLS 44-SER-idriftsættelses- værktøjer er tilgængelige for alle HLS-temperatur- controllerne. ML-SER-værktøjet er beregnet til nem idriftssættelse og konfiguration af Produal-transmittere.
For at sikre, at dine projekter har det rigtige styringssystem, tilbyder vi vores kunder tilpasningstjenester, hvor controllerne og transmitterne bliver forhåndskonfigureret, samt dokumentation og tekniske tegninger. Vi har også en rådgivningstjeneste, der kan hjælpe den planlægningsansvarlige med valg af produkter, funktionsprogrammer, tekster til funktionsbeskrivelser og CAD-filer.
Vores tjeneste omfatter rettidig levering, 5 års garanti og onlinetjenester.
Systemkomponenter
Værktøjer
Rådgivnings- og tilpasningstjenester
OPBY
G
D
ESIG
N
OPRETHOLDE
Kompetent lokal tjeneste, der
sikrer levering, skaber tillid og yder rådgivning
Global online-adgang
Livscyklus for bygningsautomatik
Online4You
for tilgængelighed
Kursustjeneste
for kompetence
Leveringstjeneste
for punktlighed
Anvendelsestjeneste
for tilpasning
Rådgivningstjeneste
for support
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
Produal office
Partner
5 årsgaranti
Pålidelig styring og måling til bygning
saut
omat
ik
DANMARK
KONTAKTOPLYSNINGER
Mere produktinformation:
FinlandKotka VantaaProdual Oy Teknobulevardi 3-5 AKeltakalliontie 18 01530 Vantaa48770 Kotka
tel. +358 10 219 9100 Jyväskyläfax. +358 5 230 9210 Ohjelmakaari [email protected] 40500 Jyväskyläwww.produal.com
SverigeProdual Sverige ABSolkraftsvägen 16 A13570 Stockholmtel. +46 8 555 985 [email protected]
FranceProdual S.A.S.16, rue Albert Einstein77420 Champs sur Marnetel. +33 1 71 40 50 [email protected]
PolenProdual Oy - sales officeFarbiarska Street 63 b02-862 Warsawtel. +48 536 036 [email protected]
Andre landeProdual Oy partnersalgtel. +358 10 219 [email protected]
Produal A/SGeneratorvej 8H2860 Soeborg
Tel. +45 70 26 03 [email protected]