Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Öksüt Geology Map and Drillhole LocationsÖksüt Project – Q3 2014
OksutOperational License
Boundary
Keltepe
Güneytepe
Yelibelentepe
Büyüktepe
Keltepe NW
Boztepe
Oksut Project
1
Keltepe NWZone
KeltepeZone
GüneytepeZone
YelibelentepeZone
BüyüktepeZone
BoztepeZone
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
22
Öksüt Project – Q3 2014
Keltepe Prospect Drill Hole Locations and Geology
ODD225
ODD219
ODD215
ODD214
ODD213ODD217
ODD222
ODD209ODD207
ODD206ODD239
ODD211
ODD208
ODD238
ODD205
ODD237
ODD230
ODD236
ODD243
ODD242
ODD204
ODD202
ODD201ODD199
ODD189ODD196
ODD191ODD197
ODD195
ODD192ODD188
ODD194
ODD198
ODD223
ODD220 ODD235
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
3
Öksüt Project – Q3 2014
Keltepe - Section 50_KT
ODD225
ODD219
ODD215
SW NE
refe
renc
e lin
e
ODD236
ODD2360.23 / 12.0m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
4
Öksüt Project – Q3 2014
Keltepe - Section 100_KT
ODD236ODD236
0.67 / 28.4m
ODD2360.50 / 5.0m
ODD2360.23 / 12.0m
SW NEre
fere
nce
line
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
5
Öksüt Project – Q3 2014
Keltepe - Section 150_KT
ODD214ODD217
SW NE
ODD2171.16 / 21.1m
Incl. 1.83 / 7.9m
refe
renc
e lin
e
ODD2360.67 / 28.4m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
6
Öksüt Project – Q3 2014
Keltepe - Section 200_KT
refe
renc
e lin
e
SW NE
ODD222
ODD209ODD207ODD206
ODD054
ODD2051.75 / 26.0m
Incl. 3.95 / 8.8m
ODD2070.58 / 5.7m
ODD2220.31 / 6.1m
ODD2040.47 / 21.4m
ODD2040.24 / 16.5m
ODD204
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
ODD205
7
Öksüt Project – Q3 2014
Keltepe - Section 250_KT
ODD092
ODD064ODD101
ODD054
ODD047
SW NE
ODD239
reference line
ODD2390.26 / 8.2m
ODD202
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
88
Öksüt Project – Q3 2014
Keltepe - Section 300_KT
ODD2020.23 / 7.6m
ODD125
ODD054
refe
renc
e lin
e
SW NE
ODD047
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
9
Öksüt Project – Q3 2014
Keltepe - Section 350_KT
ODD194
ODD181ODD159
ODD199
ODD047
refe
renc
e lin
e
SW NE
ODD243
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
10
Öksüt Project – Q3 2014
Keltepe - Section 400_KT
SW NE
refe
renc
e lin
e
ODD194
ODD138A
ODD211 ODD047
ODD045
ODD2110.33 / 44.0m
ODD1990.95 / 10.4m
ODD1990.72 / 85.2m
Incl. 2.40 / 13.4m
ODD1990.46 / 7.7m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
1111
Öksüt Project – Q3 2014
Keltepe - Section 450_KT
ODD28AODD196
ODD047
ODD045
ODD1962.15 / 22.1m
Incl. 4.65 / 8.8mre
fere
nce
line
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
12
Öksüt Project – Q3 2014
Keltepe - Section 500_KT
ODD045
ODD100
ODD028AODD028
ODD023
refe
renc
e lin
e
SW NE
ODD208
ODD2080.28 / 18.8m
ODD1960.23 / 18.1m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
Öksüt Project – Q3 2014
Keltepe - Section 550_KT
ODD059
ODD143ODD169
refe
renc
e lin
e
SW NE
ODD045
ODD075
ODD1950.42 / 6.9m
ODD1951.81 / 8.1m
Incl. 2.42 / 5.7m
ODD1952.58 / 9.4m
Incl. 2.86/ 8.2mODD238
2.70 / 7.4mIncl. 3.62 / 5.3m
ODD2384.73 / 21.8m
Incl. 5.60 / 17.8m
ODD2380.26 / 26.0m
ODD2380.21 / 22.0m
ODD2380.25 / 7.9m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101. 13
14
Öksüt Project – Q3 2014
Keltepe - Section 600_KT
ODD140ODD104ODD082 ODD136
ODD089ODD085
ODD079ODD129
refe
renc
e lin
e
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
15
Öksüt Project – Q3 2014
Keltepe - Section 650_KT
refe
renc
e lin
e
ODD163
ODD141ODD074
ODD132
ODD051
SW NE
ODD198
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
16
Öksüt Project – Q3 2014
Keltepe - Section 700_KT
SW NE
ODD198ODD197
ODD2300.70 / 117.7m
Incl. 1.43 / 5.0mand 1.31 / 5.0m
ODD2300.24 / 39.1m
ODD2300.23 / 21.0m
ODD2300.31 / 17.3m
ODD2300.22 / 9.0m
ODD2300.28 / 8.3m
ODD2300.27 / 9.2m
refe
renc
e lin
e
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
17
Öksüt Project – Q3 2014
Keltepe - Section 750_KT
ODD072
ODD065ODD062
ODD063
ODD051
SW NE
ODD184
ODD198
refe
renc
e lin
e
ODD237ODD069
ODD242
ODD2370.35 / 65.1m
ODD2370.20 / 6.0m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
18
Öksüt Project – Q3 2014
Keltepe - Section 800_KT
refe
renc
e lin
e
ODD155ODD151
ODD150
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
19
Öksüt Project – Q3 2014
Keltepe - Section 850_KT
ODD073
reference line
ODD067
ODD066
ODD200
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
20
Öksüt Project – Q3 2014
Güneytepe Prospect Drill Hole Locations and Geology
ODD226ODD221ODD224
ODD212
ODD241
ODD216ODD210
ODD187
ODD193
ODD190
ODD190A
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
21
Öksüt Project – Q3 2014
Güneytepe - Section 150_GT
ODD029
ODD210
ODD160
ODD020ODD014
ODD013
ODD2100.36 / 50.0m
ODD2100.48 / 24.0m
refe
renc
e lin
e
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
22
Öksüt Project – Q3 2014
Güneytepe - Section 180_GT
SW NE
ODD032
ODD216ODD034
ODD180ODD020
ODD010
ODD014re
fere
nce
line
ODD2161.52 / 28.5m
Incl. 3.27 / 11.8mODD216
0.30 / 15.2m
ODD2161.07 / 7.4m
Faul
t Zon
e
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
23
Öksüt Project – Q3 2014
Güneytepe - Section 210_GT
ODD226
ODD032
ODD164
ODD012
ODD096ODD020
ODD180
ODD116ODD114 ODD121
ODD014
refe
renc
e lin
e
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
24
Öksüt Project – Q3 2014
Güneytepe - Section 240_GT
ODD221 ODD224
SW NEODD005
ODD032
ODD037
ODD021
ODD014
ODD096ODD015
reference line
ODD2210.61 / 9.6m
ODD2240.22 / 12.8m
ODD1931.35 / 16.7m
Incl. 1.79 / 12.1m
ODD1930.60 / 11.2m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
25
Öksüt Project – Q3 2014
Güneytepe - Section 270_GT
refe
renc
e lin
e
ODD224
ODD011 ODD021
ODD099
ODD014ODD193
ODD108
ODD161
ODD031
ODD032
ODD044
SW NE
ODD241
ODD2410.21 / 38.0m
ODD2410.27 / 28.7m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
26
Öksüt Project – Q3 2014
Güneytepe - Section 300_GT
refe
renc
e lin
e
SW NE
ODD224 ODD031
ODD033ODD171
ODD006ODD168
ODD241
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
27
Öksüt Project – Q3 2014
Güneytepe - Section 330_GT
SW NE
ODD022
ODD031
ODD167ODD174
ODD009ODD112
ODD117
ODD212
ODD224re
fere
nce
line
ODD2120.26 / 5.0m
ODD2120.24 / 8.0m
ODD2120.48 / 6.4m
ODD2120.53 / 56.5m
ODD2121.11 / 20.3m
Incl. 1.40 / 13.0m
ODD2121.38 / 51.2m
Incl. 2.66 / 23.1m
ODD2120.71 / 9.1m
ODD2120.37 / 45.9m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
28
Öksüt Project – Q3 2014
Keltepe NW Prospect Drill Hole Locations and Geology
ODD220
ODD223
ODD235
ODD229
ODD231
ODD240
ODD203
ODD227
ODD228
ODD218
ODD234
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
29
Öksüt Project – Q3 2014
Keltepe NW - Section -100_KTNW
ODD220 ODD223
ODD235
refe
renc
e lin
e
SW NE
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
30
Öksüt Project – Q3 2014
Keltepe NW - Section 0_KTNW
ODD218
ODD231
ODD229
ODD240
SW NE
ODD2310.34 / 16.0m
ODD2310.32 / 18.6m
refe
renc
e lin
e
ODD2400.24 / 21.0m
ODD2400.46 / 17.0m
ODD2400.33 / 5.0m
ODD2400.47 / 36.5m
ODD2400.23 / 9.5m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
31
Öksüt Project – Q3 2014
Keltepe NW - Section 100_KTNW
ODD227
ODD203
ODD071ODD043
refe
renc
e lin
e
SW NE
ODD2030.35 / 10.9m
ODD2030.23 / 10.4m
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
32
Öksüt Project – Q3 2014
Keltepe NW - Section 200_KTNW
SW NE
ODD228
ODD178ODD178AODD234
refe
renc
e lin
e
This information should be read together with our news release of October 29, 2014. Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101.
Page 1 of 3
Drill Hole Section Line To (m) Core Length (m) Au (g/t) Oxidation
ODD187 Guneytepe Metallurgical 180_GT
ODD188 Keltepe Metallurgical 600_KT
ODD189 Keltepe Metallurgical 450_KT
ODD190 Guneytepe Metallurgical 210_GT
ODD190A Guneytepe Metallurgical 210_GT
ODD191 Keltepe Metallurgical 750_KT
ODD192 Keltepe Metallurgical 550_KT
0.0 16.7 16.7 1.35 oxide
includes 2.0 14.1 12.1 1.79 oxide
95.2 106.4 11.2 0.60 oxide/partially oxidized
ODD194 Buyuktepe Exploration 400_KT
32.6 41.0 8.1 1.81 oxide
includes 32.6 38.6 5.7 2.42 oxide
59.4 68.8 9.4 2.58 oxide
includes 59.4 67.6 8.2 2.86 oxide
186.6 193.5 6.9 0.42 oxide
21.1 39.5 18.1 0.23 oxide
141.0 164.4 22.1 2.15 oxide
includes 145.8 155.0 8.8 4.65 oxide
ODD197 Keltepe Geotechnical 650_KT
ODD198 Buyuktepe Exploration 750_KT
66.0 76.7 10.4 0.95 oxide
84.7 174.1 85.2 0.72 oxide
includes 84.7 99.3 13.4 2.40 oxide
205.0 213.0 7.7 0.46 oxide
ODD200 Keltepe Geotechnical 800_KT
ODD201 Keltepe Geotechnical 350_KT
ODD202 Keltepe Geotechnical 300_KT 41.7 49.3 7.6 0.23 oxide
328.4 339.3 10.9 0.35 oxide
345.3 355.7 10.4 0.23 oxide
114.6 136.0 21.4 0.47 oxide
141.1 157.6 16.5 0.24 oxide
86.0 112.0 26.0 1.75 oxide
includes 93.2 102.0 8.8 3.95 oxide
ODD206 Keltepe Exploration 200_KT
ODD207 Keltepe Exploration 200_KT 54.8 60.5 5.7 0.58 oxide
ODD208 Keltepe Infill 500_KT 7.5 26.3 18.8 0.28 oxide
ODD209 Keltepe Exploration 200_KT
114.0 164.0 50.0 0.36 oxide
164.0 188.0 24.0 0.48 sulphide
ODD211 Keltepe Infill 400_KT 108.0 152.0 44.0 0.33 oxide
Notes: Mineralized intervals are greater than 0.20 g/t Au.
Higher grade sub-intervals are greater than 1.00 g/t Au.
Minimum 5m width and maximum of 5m internal dilution.
True widths for mineralized zones are about 60% to 90% of stated down hole interval.
Oxidation assignment is a visual discrimination from core logging.
This information should be read together with our news release of October 29th, 2014.
Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101. Tables are current as of September 30, 2014.
Drill Results
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
Metallurgical Drill Hole - No Assaying
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
200_KTODD204 Keltepe Exploration
ODD199 Keltepe Geotechnical
Centerra Gold Inc. - Oksut Gold Project
Period May 1st, 2014 to September 30th, 2014
ODD203
From (m)
Keltepe NW Exploration 100_KTNW
ODD193 Guneytepe Geotechnical 240_GT
550_KT
500_KT
400_KT
ODD195 Keltepe Geotechnical
ODD196 Keltepe Geotechnical
ODD205 Keltepe Exploration 200_KT
150_GTGüneytepe InfillODD210
No Signficant Intercepts
No Signficant Intercepts
Page 2 of 3
Drill Hole Section Line To (m) Core Length (m) Au (g/t) Oxidation
16.4 21.4 5.0 0.26 oxide
29.4 37.4 8.0 0.24 oxide
46.6 53.0 6.4 0.48 partially oxidized
53.0 109.5 56.5 0.53 sulphide
109.5 129.8 20.3 1.11 oxide
includes 115.9 128.9 13.0 1.40 oxide
129.8 181.0 51.2 1.38 sulphide
includes 153.9 177.0 23.1 2.66 sulphide
181.0 190.1 9.1 0.71 oxide/partially oxidized
190.1 236.0 45.9 0.37 sulphide
ODD213 Keltepe Exploration 150_KT
ODD214 Keltepe Exploration 150_KT
ODD215 Keltepe Exploration 50_KT
0.0 28.5 28.5 1.52 oxide/partially oxidized
includes 13.2 25.0 11.8 3.27 oxide
66.8 82.0 15.2 0.30 oxide
127.5 134.9 7.4 1.07 sulphide
85.7 106.8 21.1 1.16 oxide
includes 85.7 93.6 7.9 1.83 oxide
ODD218 Keltepe NW Exploration 0_KTNW
ODD219 Keltepe Exploration 50_KT
ODD220 Keltepe NW Exploration -100_KTNW
ODD221 Güneytepe Exploration 240_GT 4.0 13.6 9.6 0.61 oxide
ODD222 Keltepe Exploration 200_KT 196.2 202.3 6.1 0.31 oxide
ODD223 Keltepe NW Exploration -100_KTNW
ODD224 Güneytepe Exploration 240_GT 0.0 12.8 12.8 0.22 oxide
ODD225 Keltepe Exploration 50_KT
ODD226 Güneytepe Exploration 210_GT
ODD227 Keltepe NW Exploration 100_KTNW
ODD228 Keltepe NW Exploration 200_KTNW
ODD229 Keltepe NW Exploration 0_KTNW
36.4 154.1 117.7 0.70 oxide
includes 93.6 98.6 5.0 1.43 oxide
and 129.1 134.1 5.0 1.31 oxide
160.9 200.0 39.1 0.24 oxide
217.3 238.3 21.0 0.23 oxide
254.0 271.3 17.3 0.31 oxide
300.0 309.0 9.0 0.22 oxide
335.0 343.3 8.3 0.28 oxide
349.8 359.0 9.2 0.27 oxide
212.0 228.0 16.0 0.34 oxide
237.0 255.6 18.6 0.32 oxide
ODD232 Kozluca -
ODD233 Keltepe E Exploration -
Notes: Mineralized intervals are greater than 0.20 g/t Au.
Higher grade sub-intervals are greater than 1.00 g/t Au.
Minimum 5m width and maximum of 5m internal dilution.
True widths for mineralized zones are about 60% to 90% of stated down hole interval.
Oxidation assignment is a visual discrimination from core logging.
This information should be read together with our news release of October 29th, 2014.
Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101. Tables are current as of September 30, 2014.
Drill Results
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
Period May 1st, 2014 to September 30th, 2014
From (m)
ODD230 Keltepe Infill
ODD231 Keltepe NW Exploration
150_KT
700_KT
ODD217
330_GT
180_GT
ODD212 Guneytepe Infill
ODD216 Güneytepe Infill
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
Not Sampled
Not Sampled
0_KTNW
No Signficant Intercepts
No Signficant Intercepts
No Signficant Intercepts
Centerra Gold Inc. - Oksut Project
Keltepe Exploration
Page 3 of 3
Drill Hole Section Line To (m) Core Length (m) Au (g/t) Oxidation
ODD234 Keltepe NW Exploration 200_KTNW
ODD235 Keltepe NW Exploration -100_KTNW
70.0 98.4 28.4 0.67 oxide
218.0 223.0 5.0 0.50 oxide
235.0 247.0 12.0 0.23 oxide
135.2 200.3 65.1 0.35 oxide
327.2 333.2 6.0 0.20 oxide/sulphide
35.2 42.6 7.4 2.70 oxide
includes 35.2 40.5 5.3 3.62 oxide
65.8 87.6 21.8 4.73 oxide
includes 68.8 86.6 17.8 5.60 oxide
170.0 196.0 26.0 0.26 oxide
208.0 230.0 22.0 0.21 oxide
307.3 315.2 7.9 0.25 sulphide
ODD239 Keltepe Infill 250_KT 295.8 304.0 8.2 0.27 sulphide
114.0 135.0 21.0 0.24 oxide
154.0 171.0 17.0 0.46 oxide
187.5 192.5 5.0 0.33 oxide
201.5 238.0 36.5 0.47 oxide
281.0 290.5 9.5 0.23 oxide/sulphide
22.1 60.1 38.0 0.21 oxide/partially oxidised
87.5 116.2 28.7 0.27 sulphide
ODD242 Keltepe Infill 800_KT
109.0 116.0 7.0 0.29 oxide
160.0 165.0 5.0 0.25 oxide
Notes: Mineralized intervals are greater than 0.20 g/t Au.
Higher grade sub-intervals are greater than 1.00 g/t Au.
Minimum 5m width and maximum of 5m internal dilution.
True widths for mineralized zones are about 60% to 90% of stated down hole interval.
Oxidation assignment is a visual discrimination from core logging.
This information should be read together with our news release of October 29th, 2014.
Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101. Tables are current as of September 30, 2014.
150_KT
750_KT
550_KT
0_KTNWODD240 Keltepe NW Exploration
ODD237 Keltepe Exploration
ODD236 Keltepe Exploration
ODD238 Keltepe Infill
ODD243 Keltepe Infill
No Significant Intercepts
270_GT
350_KT
ODD241 Guneytepe Infill
Not Sampled
No Signficant Intercepts
Centerra Gold Inc. - Oksut Project Drill Results
Period May 1st, 2014 to September 30th, 2014
From (m)
Page 1 of 1
Drill Hole Target Section Line Location Easting * Location Northing * Elevation (m) Length (m) Collar Azimuth ** Collar Dip
ODD0187 Guneytepe Metallurgical 180_GT 719,548 4,239,740 1,762.00 80.0 240° -75°
ODD0188 Keltepe Metallurgical 600_KT 719,405 4,240,577 1,808.00 230.0 257° -60°
ODD0189 Keltepe Metallurgical 450_KT 719,506 4,240,463 1,844.00 270.0 257° -50°
ODD0190 Guneytepe Metallurgical 210_GT 719,391 4,239,671 1,684.00 50.6 60° -45°
ODD0190A Guneytepe Metallurgical 210_GT 719,394 4,239,673 1,687.00 130.0 60° -45°
ODD0191 Keltepe Metallurgical 750_KT 719,264 4,240,683 1,807.00 140.0 77° -60°
ODD0192 Keltepe Metallurgical 550_KT 719,570 4,240,576 1,829.00 310.0 257° -50°
ODD0193 Guneytepe Geotechnical 240_GT 719,509 4,239,784 1,760.00 173.0 50° -60°
ODD0194 Buyuktepe Exploration 400_KT 718,951 4,240,287 1,820.00 312.2 240° -45°
ODD0195 Keltepe Geotechnical 550_KT 719,507 4,240,544 1,821.00 225.0 45° -75°
ODD0196 Keltepe Geotechnical 500_KT 719,268 4,240,423 1,777.00 200.0 240° -75°
ODD0197 Keltepe Geotechnical 650_KT 719,602 4,240,662 1,854.00 175.0 45° -60°
ODD0198 Buyuktepe Exploration 750_KT 718,771 4,240,574 1,805.00 388.2 240° -45°
ODD0199 Keltepe Geotechnical 400_KT 719,499 4,240,411 1,847.89 260.0 125° -75°
ODD0200 Keltepe Geotechnical 800_KT 719,341 4,240,749 1,825.00 200.0 0° -65°
ODD0201 Keltepe Geotechnical 350_KT 719,726 4,240,405 1,872.00 175.0 90° -75°
ODD0202 Keltepe Geotechnical 300_KT 719,502 4,240,297 1,832.00 200.0 160° -75°
ODD0203 Keltepe NW Exploration 100_KTNW 719,168 4,241,067 1,816.54 404.0 257° -60°
ODD0204 Keltepe Exploration 200_KT 719,759 4,240,262 1,860.80 252.2 257° -60°
ODD0205 Keltepe Exploration 200_KT 719,710 4,240,240 1,854.77 177.7 257° -60°
ODD0206 Keltepe Exploration 200_KT 719,649 4,240,229 1,837.64 230.9 257° -60°
ODD0207 Keltepe Exploration 200_KT 719,582 4,240,219 1,835.00 221.0 257° -60°
ODD0208 Keltepe Infill 450_KT 719,225 4,240,421 1,779.69 198.4 257° -60°
ODD0209 Keltepe Exploration 200_KT 719,477 4,240,191 1,812.88 253.2 257° -60°
ODD0210 Guneytepe Infill 150_GT 719,427 4,239,622 1,685.00 200.0 240° -65°
ODD0211 Keltepe Infill 400_KT 719,284 4,240,364 1,780.00 227.0 257° -60°
ODD0212 Guneytepe Infill 330_GT 719,260 4,239,745 1,652.00 238.0 60° -45°
ODD0213 Keltepe Exploration 150_KT 719,707 4,240,187 1,831.00 192.0 257° -60°
ODD0214 Keltepe Exploration 150_KT 719,656 4,240,184 1,825.00 197.2 257° -60°
ODD0215 Keltepe Exploration 50_KT 719,842 4,240,114 1,852.00 262.0 257° -60°
ODD0216 Guneytepe Infill 180_GT 719,341 4,239,605 1,655.00 223.0 60° -45°
ODD0217 Keltepe Exploration 150_KT 719,774 4,240,215 1,841.00 232.3 257° -60°
ODD0218 Keltepe NW Exploration 0_KTNW 718,790 4,240,885 1,682.00 119.5 257° -60°
ODD0219 Keltepe Exploration 50_KT 719,734 4,240,101 1,820.00 202.8 257° -60°
ODD0220 Keltepe NW Exploration -100_KTNW 718,921 4,240,817 1,714.00 140.7 77° -60°
ODD0221 Guneytepe Exploration 240_GT 718,955 4,239,450 1,605.00 160.0 240° -45°
ODD0222 Keltepe Exploration 200_KT 719,380 4,240,161 1,779.00 240.0 257° -60°
ODD0223 Keltepe NW Exploration -100_KTNW 718,934 4,240,806 1,714.00 64.5 257° -60°
ODD0224 Guneytepe Exploration 240_GT 718,952 4,239,452 1,605.00 143.3 0° -45°
ODD0225 Keltepe Exploration 50_KT 719,539 4,240,056 1,789.00 205.5 257° -60°
ODD0226 Guneytepe Exploration 210_GT 719,020 4,239,477 1,611.00 153.0 240° -45°
ODD0227 Keltepe NW Exploration 100_KTNW 718,879 4,241,009 1,710.00 279.6 77° -60°
ODD0228 Keltepe NW Exploration 200_KTNW 718,968 4,241,127 1,745.00 207.0 77° -60°
ODD0229 Keltepe NW Exploration 0_KTNW 719,193 4,240,977 1,815.00 280.7 257° -60°
ODD0230 Keltepe Infill 700_KT 719,286 4,240,640 1,805.00 460.6 0° -90°
ODD0231 Keltepe NW Exploration 0_KTNW 718,994 4,240,936 1,745.00 343.0 77° -60°
ODD0232 Kozluca Exploration - 718,600 4,243,400 1,615.00 333.9 200° -75°
ODD0233 Keltepe E Exploration - 720,881 4,239,981 1,910.00 304.0 110° -75°
ODD0234 Keltepe NW Exploration 200_KTNW 718,699 4,241,062 1,685.00 164.0 77° -75°
ODD0235 Keltepe NW Exploration -100_KTNW 719,121 4,240,858 1,779.00 304.4 77° -50°
ODD0236 Keltepe Exploration 150_KT 719,706 4,240,190 1,834.00 347.0 77° -50°
ODD0237 Keltepe Exploration 750_KT 719,064 4,240,656 1,747.44 410.0 0° -90°
ODD0238 Keltepe Infill 550_KT 719,513 4,240,545 1,821.00 437.4 0° -90°
ODD0239 Keltepe Infill 250_KT 719,543 4,240,250 1,838.00 370.4 0° -90°
ODD0240 Keltepe NW Exploration 0_KTNW 718,995 4,240,943 1,745.00 304.1 257° -45°
ODD0241 Guneytepe Infill 270_GT 719,203 4,239,655 1,645.00 196.5 60° -45°
ODD0242 Keltepe Infill 800_KT 719,344 4,240,751 1,825.00 164.0 180° -85°
ODD0243 Keltepe Infill 350_KT 719,459 4,240,335 1,835.00 220.5 257° -50°
Notes: Section line is location of the hole collar. * Datum is UTM ED50 Zone 36
** Azimuths are relative to gridThis information should be read together with our news release of October 29th, 2014.
Malcolm Stallman, a Member of the Australian Institute of Geoscientists (AIG), is Centerra’s qualified person for the purpose of National Instrument 43-101. Table is current as of September 30, 2014.
Centerra Gold Inc. - Oksut Gold Project, Turkey Diamond Drill Hole Locations
Period May 1st, 2014 to September 30th, 2014