Laminazione Sottile catalogue

The Company

The

Com

pany

Etablished in 1923, Laminazione Sottile is the parent

company of Laminazione Sottile Group, specialized

in the production of rolled aluminium products.

After several years spent manufacturing closures and

paste-tubes, our company began a process of verti-

cal integration, startig with the rolling of aluminium.

During the ‘sixties, the manufacture of finished

products came to a halt, and the entire production

process was geared to the rolling of aluminium.

Since then we have not ceased to invest in human

resources, machinery and technology in order to

improve our performance.

3

The Factory

The factory is situated

in the south of Italy and

consists of an area of

160,00 square metres, of

which 60,000 are covered.

The integrated production

process, the modern and

flexible plant, and more

than 75 years

of experience enable

Laminazione Sottile to

offer rolled aluminium for

a wide range of techno-

logical applications. Our

technical experts are

always available to put

their knowledge and skills

at clients’ disposal for any

project.

It is the aim of our Com-

pany to become a global

supplier of a large number

of industrial factories

using rolled aluminium

world-wide

World Wide RolledAluminium Supplier

The Market

The

Mar

ket

Thanks to years spent researching implementation

of the performance capacity of our products, service

and new applications, Laminazione Sottile products

are now widely known and utilised the world over.

The daily aim of all the staff here in our Company is

to satisfy the customer. We are today proud to sup-

ply the most important and demanding companies

in the field of rolled aluminium applications over five

continents among our customers.


5


Continuous research

into new technology and

products, never-ending

attempts to improve the

quality of existing pro-

ducts and flexibility with

regards to production all

enable our company to

produce rolled aluminium

for an extensive range of

applications.

The main applications are:

Rigid Packaging

Semirigid Packaging

Flexible Packaging

Heat Exchange

Cookware

General Engineering


The Production

The

Prod

uctio

n

1

2

Aluminium

Is the earth’s most

Abundant metal element,

and represent about

eighth per cent

of the crust.

Aluminium is:

Non-toxic

Non – Magnetic

Non-Permeable

Opaque

Sterilizable

Recyclable

Tasteless

Odourless

Lightweight

Resistant Barrier

Corrosion Resistant

Thermal Conductor

Electrical Conductor

Ductile and Malleable

7

Laminazione Sottile has

An Integrated

Production cycle,

starting from

the melting process

and ends at the finished

product having passed

through processes

of hot rolling,

heat treatment,

surface treatment,

slitting and cutting

Process

There are seven production

Sectors:

1 Foundry

2 Hot Rolling

3 Cold Rolling

4 Annealing

5 Surface Treatment

6 Slitting and Cutting

7 Quality assurance

4

5

6

7

3

Alloys

Allo

ys

1050 0.25 0.4 0.05 0.05 0.05 0.05 - 0.03 0.03 - 99.5 min.

1060 0.25 0.35 0.05 0.03 0.03 0.05 - 0.03 0.03 - 99.6 min.

1100 0.95Fe+Si - 0.05-0.20 0.05 - 0.1 - - 0.05 0.15 99.0 min.

1200 1.0 Fe+Si - 0.05 0.05 - 0.1 - 0.05 0.05 0.15 99.0 min.

1230 0.7 Fe+Si - 0.1 0.05 0.05 0.1 - 0.03 0.03 - 99.3 min.

3003 0.6 0.7 0.05-0.2 1.0-1.5 - 0.1 - - 0.05 0.15 Rest

3003Z* 0.6 0.7 0.05-0.2 1.0-1.5 - 1.0-2.0 - - 0.05 0.15 Rest

3003R** 0.2-0.4 0.7 0.05 1.0-1.6 0.05-0.20 0.3-0.6 0,05 0,05 0,05 0.15 Rest

3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 0.25 - - 0.05 0.15 Rest

3005 0.6 0.7 0.3 1.0-1.5 0.2-0.6 0.25 0.1 0.1 0.05 0.15 Rest

3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.4 0.2 0.1 0.05 0.15 Rest

4005* 0.7-1.0 0.2-0.35 0.05 0.03 0.03 0.05 0.2 0.03 0.05 0.15 Rest

4006 0.8-1.2 0.5-0.8 0.1 0.05 0.01 0.05 0.2 - 0.05 - Rest

5005 0.3 0.7 0.2 0.2 0.5-1.1 0.25 0.1 - 0.05 0.15 Rest

5006 0,4 0,8 0,1 0,40-0,80 0,8-1,3 0,25 0,1 0,10 0,05 0,15 Rest

5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 - 0.05 0.15 Rest

5754 0,4 0,4 0,1 0,5 2,6-3,6 0,2 0,3 0,15 0,05 0,15 Rest

6818*** 0.5-1.0 0.7 0.02-0.05 1.0-1.5 0.02-0.05 1.3-1.7 0.02 0.05 0.05 0.15 Rest

8009=8006 0.4 1.2-2.0 0.3 0.3-1.0 0.1 0.1 - - 0.05 0.15 Rest

8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 0.05 0.15 Rest

8079 0.05-0.3 0.7-1.3 0.05 - - 0.1 - - 0.05 0.15 Rest

Alloys Si Fe Cu Mn

COMPOSITION (%) ACCORDING TO AA

9

1050 0.25 0.4 0.05 0.05 0.05 0.05 - 0.03 0.03 - 99.5 min.

1060 0.25 0.35 0.05 0.03 0.03 0.05 - 0.03 0.03 - 99.6 min.

1100 0.95Fe+Si - 0.05-0.20 0.05 - 0.1 - - 0.05 0.15 99.0 min.

1200 1.0 Fe+Si - 0.05 0.05 - 0.1 - 0.05 0.05 0.15 99.0 min.

1230 0.7 Fe+Si - 0.1 0.05 0.05 0.1 - 0.03 0.03 - 99.3 min.

3003 0.6 0.7 0.05-0.2 1.0-1.5 - 0.1 - - 0.05 0.15 Rest

3003Z* 0.6 0.7 0.05-0.2 1.0-1.5 - 1.0-2.0 - - 0.05 0.15 Rest

3003R** 0.2-0.4 0.7 0.05 1.0-1.6 0.05-0.20 0.3-0.6 0,05 0,05 0,05 0.15 Rest

3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 0.25 - - 0.05 0.15 Rest

3005 0.6 0.7 0.3 1.0-1.5 0.2-0.6 0.25 0.1 0.1 0.05 0.15 Rest

3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.4 0.2 0.1 0.05 0.15 Rest

4005* 0.7-1.0 0.2-0.35 0.05 0.03 0.03 0.05 0.2 0.03 0.05 0.15 Rest

4006 0.8-1.2 0.5-0.8 0.1 0.05 0.01 0.05 0.2 - 0.05 - Rest

5005 0.3 0.7 0.2 0.2 0.5-1.1 0.25 0.1 - 0.05 0.15 Rest

5006 0,4 0,8 0,1 0,40-0,80 0,8-1,3 0,25 0,1 0,10 0,05 0,15 Rest

5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 - 0.05 0.15 Rest

5754 0,4 0,4 0,1 0,5 2,6-3,6 0,2 0,3 0,15 0,05 0,15 Rest

6818*** 0.5-1.0 0.7 0.02-0.05 1.0-1.5 0.02-0.05 1.3-1.7 0.02 0.05 0.05 0.15 Rest

8009=8006 0.4 1.2-2.0 0.3 0.3-1.0 0.1 0.1 - - 0.05 0.15 Rest

8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 0.05 0.15 Rest

8079 0.05-0.3 0.7-1.3 0.05 - - 0.1 - - 0.05 0.15 Rest

Mg Zn Cr Ti OthersEach

OthersTotal Al

(*) Not standard alloys(**) Not standard alloys – Plus: Sn = 0,03-0,07 Zr = 0,10-0,20(***) Not standard alloys – Plus: Zr = 0,05-0,20Composition in % max unless shown as range or min

AlloysNotes:

COMPOSITION (%) ACCORDING TO AA

Rigid Packaging

Rigi

d Pa

ckag

ing

11

Extra Deep CapsOmnia CapsPharma CapsPP Caps for Carbonate Drink

Main Alloys

Thicknesses

Surface finishing

Surface treatment

Thickness Tolerance

Strip Width range

Inside Diameter

Outside Diameter

Sheet Lenght range

Widht range

3003 3004 3005 3105 5052 5006 5754 8011

from 0,15 to a 0,50 mm

Mill finish on request bright roughness Ra<0,10 microns

Chemical degreasing and/or conversion treatment. Lacquered

on request

According to EN standard or better

from 20 to 1250 mm

70/75/150/200/300/400/500 mm

from 590 to 1180 mm

from 400 to 1900 mm

from 400 to 1250

Rigid Packaging Applications

Ring Pull CapsStandard PP CapsTear Off CapsCans and Easy-Open Lids

Semirigid Packaging

Sem

irigi

d Pa

ckag

ing

13

Semirigid Packaging ApplicationsAir-line food containersAshtraysCandle lightDose containersFolded Food Containers

Lids for containersPluri compartment containersStandard containersStiff containersTrays

Main Alloys

Thicknesses

Surface finishing

Surface Treatment

Thicknesses Tolerance

Strip Width range

Inside Diameter

Outside Diameter

1200 3003 3004 3005 3105 5052

8006/8009 8011 8079

from 0,030 to 0,40 mm

Mill finish on request bright roughness Ra <0,10 microns

Chemical degreasing / Cleaning (grade “A”) / no smell. Laquered on

request

According to AFCO or better

from 35 to 1250 mm

70/75/150/200/300 mm

from 590 to 1075 mm

Flexible Packaging

Flex

ible

Pac

kagi

ng

15

Flexible Packaging ApplicationsCaps for bottleConverter foilHousehold foilBlister

SealsYogurt lidsAdhesive tapes

Main Alloys

Thicknesses

Surface finishing

Surface Treatment


Strip Width range

Inside Diameter

Outside Diameter

1050 1200 8009 8079

from 7 to 40 microns (double rolled)

under 25 microns one side matt one side bright / from 25 to 40

microns bright both sides

Thermal degreasing/chemical degreasing for thicknesses > 30 microns

According to AFCO or better

from 100 to 1250 mm

70/76/150 mm

from 450 to 800 mm

Heat Exchangers

Heat

Exc

hang

ers

17

Heat Exchangers ApplicationsFinstock for car radiatorsFinstock Draw-TypeFinstock Drawless TypeRefrigerator PanelsRotary Heat Exchangers

Plate Heat ExchangersBrazed FinsVacuum Brazed FinsInert Gas Brazed FinsFlexible Tubes

Main Alloys

Thicknesses

Surface finishing

Surface Treatment


Strip Width range

Inside Diameter

Outside Diameter

1050 1100 1200 3003 3003R 3003Z 6818 8006/8009

8011 8079

from 0,07 to 0,4 mm


Chemical degreasing and / or conversion treatment. Lacquered on

request


from 20 to 1250 mm

70/75/150/200/300 mm

from 590 to 1075 mm

Cook Ware

Cook

War

e

19

Cook Ware ApplicationsDeep Drawing TanksLids

Pans and cooking tools

Main Alloys

Thicknesses

Surface finishing


Strip Width range

Inside Diameter

Outside Diameter

Circles Diameters

1050 1230 3003 3004 3105 4006 5005

from 0,5 to 6,0 mm

Mill finish roughness Ra 0,20 – 0,40 microns


from 200 to 1250 mm

400/500/600 mm

from 940 to 1180 mm

100/110/120/128/130/133,5/135/140/147/150/155/158/160/175/

180/185/190/195/196,85/200/205/210/215/215,89/220/225/230/235/

240/245/247,65/250/255/260/265/270/275/280/285/290/295/298,4/

300/305/310/315/320/325/330335/340/345/350/355/360/365/

368,25/370/375/380/385/390/395/400/405/410/415/420/430/435/

440/445/450/455/465/469,88/470/475/480/485/490/495/500/505/

510/520/525/530/535/540/545/550/555/560/580/585/595/600/605/

610/620/625/630/635/645/650/660/670/680/685/690/700/710/

720/740

General Engineering

Gene

ral E

ngin

eerin

g

21

General Engineering ApplicationsAl-Pvc Tubes for water pipelineCondenser casesFilter GridHoneycomb panelsInsulation panelsLight BulbProfiles for double glazingRollbondRoller shutters-ceilings-panelsRoofing

Fins for spiral tubesSecurity Floating RoofRaised FloorRoof ridge stripSubstrate for el.circuit board drillingTransformer (strip with round-edge)Venetian BlindsElectric cables windingCladding on stellLight Parabolas

1050 1060 1200 1230 3003 3005 3004 3105 5005

5052 8009 8011 8079

from 0,03 to 5,0 mm


Chemical degreasing and / or conversion treatment.


from 20 to 1250 mm

70/75/150/200/300/500/600 mm

from 590 to 1180 mm

from 400 to 5000 mm

from 400 to 1250 mm

Main Alloys

Thicknesses

Surface finishing

Surface treatment

Thickness Tolerance

Strip Width range

Inside Diameter

Outside Diameter

Sheet Lenght range

Widht range

Quality & TechnologyOur company’s main aim is to satisfy the customer.

The latest equipment, experienced staff, flexibility and

Total Quality Management are the main features of

our development and success which have enabled our

company to become a globally-renowned manufactu-

rer of aluminium rolled products.

The ultimate success of this important project depends

on continuous delivery of the Quality Sistem which

affects all areas of the Company.

Our personnel undergo a full and continual program-

me of training in order to improve their professional

knowleledge and skills.

Qual

ity &

Tec

hnol

ogy

23

Our Quality and Environmental system for-

mally certified according to ISO 9001:2000,

and ISO 14001:2004.

Total Quality Management, based on the

philosophy of continuous improvement, have

been chosen as Company Policy.

The research and development programme,

which is being carried out together with

our Customers, supported by various University and Research Center

Professionals, have high expectations in the field of new materials,

processes, applications and environment protection.

The ability in getting steady increase in the range of products and ser-

vices by following, and even at times anticipating market trends, is one

of the chief factors behind our company’s successful story.

SS87 Km21,200 S.Marco Evangelista - 81020 Caserta - Italyph. +39 0823 222111fax +39 0823 451722www.laminazionesottile.com

Documents

Laminazione Sottile catalogue