Embed Size (px)
Citation preview
Langakslet gyllepumpe
Landia gyllepumpe type TPG for traktor og type MPG for eldrift med 4“, 5“ eller 6“ pumperør og energimotorer fra 5,5 – 30,0 kW. En driftssikker, robust pumpe med høj kapacitet til pumpning af gylle og andre vanskeligt pumpbare medier.
• Støbt pumpehus og pumpehjul med maksimal virkningsgrad
• Varmforzinkede rør og beslag • Meget servicevenlig konstruktion • Leveres til for- og lagertanke indtil 6 m tankdybde • Traktordrift med vinkelgear.
Kan leveres med justerbar Knivsystem i hærdet Traktordrift med vinkelgear. bundblander. stål til findeling af Optimal ydelse: Ekstraudstyr kan leveres for halmen og snegl for 540 rpm. ved 4”/5” pumper montering i lagertank. ensartet fødning af og 1000 rpm. ved 6” pumper. pumpe sikrer tilstop- ningsfri pumpning.
Engineered to last
Slurry Pump MPTK for dry installation Versatile dry installed slurry pump with motors ranging from 0.55 – 30 kW. The MPTK pump is for in-line installation outdoor or in a dry pit. As an example of application is “Straight Flush Systems”. The MPTK Slurry Pump can handle slurry with a high concentration of solids and the unique pump design further improves the capability of pumping slurry containing straw. Abrasive liquids, such as slurry with sand, has led to the development of optional pump components in hardened cast iron which significantly increases the life time. We offer individual pump solutions with a choice of different flanges and connections for steel as well as PVC pipes.
• 14 motor sizes from 0.55 – 30 kW • 50, 65, 80, 105 or 150 mm pump discharge • Capacity up to approximately 475 m³/hour
Special features:
• Chopping knives available as an option • Available with hardened pump components – for abrasive slurry • Close coupled, compact design
Engineered to last
Slurry Pump MPTK for dry installation Versatile dry installed slurry pump with motors ranging from 0.55 – 30 kW. The MPTK pump is for in-line installation outdoor or in a dry pit. As an example of application is “Straight Flush Systems”. The MPTK Slurry Pump can handle slurry with a high concentration of solids and the unique pump design further improves the capability of pumping slurry containing straw. Abrasive liquids, such as slurry with sand, has led to the development of optional pump components in hardened cast iron which significantly increases the life time. We offer individual pump solutions with a choice of different flanges and connections for steel as well as PVC pipes.
• 14 motor sizes from 0.55 – 30 kW • 50, 65, 80, 105 or 150 mm pump discharge • Capacity up to approximately 475 m³/hour
Special features:
• Chopping knives available as an option • Available with hardened pump components – for abrasive slurry • Close coupled, compact design
Engineered to last
MPTK medium pressure
Performance and specifications: (valid in water)
Article Motor Consumption at Weight no. Type size 3x400V Dimensions kg (400V) kW amp (mm) H x W x L
Motor: 3-phased AC motor, 50 Hz, voltage: 400V, 1500 rpm. Different motors specifications available.
Materials:
Motor casing, pump casing and impeller: Cast iron AISI A48-40B Knife system: Hardened steel
The following information should be given with each inquiry:
• purpose of application • type of liquid • length of pipe • total head
• pressure/performance required • dry matter content • diameter of pipe
The text and the technical data given must not be reproduced partly or completely without permission from Landia A/S. We reserve the right to make technical alterations. 2203GB-01-07-13
Head office: UK-Branch: Landia A/S Landia (UK) Ltd. Industrivej 2 Waymills Industrial Estate DK-6940 Lem St. Whitchurch, Shropshire SY13 1TT Tel. +45 97 34 12 44 Tel.: 01948 661 200 Fax. +45 97 34 16 98 Fax: 01948 661 201 e-mail: [email protected] Email: [email protected] www.LandiaWorld.com www.landia.co.uk
25 04 19 6 M PT K 50 0 ,5 5 1 ,6 24 8x2 94 x3 60 2 525 04 19 7 M PT K 50 0 ,7 5 2 ,1 24 8x2 94 x3 60 2 525 04 79 8 M PT K 65 1,1 2 ,6 37 1x3 20 x4 65 4 525 04 70 1 M PT K 65 1,5 3 ,4 37 1x3 20 x4 90 5 025 04 70 2 M PT K 65 2,2 5 ,0 37 1x3 20 x4 95 5 525 04 80 3 M PT K 80 3,0 6 ,7 43 2x3 69 x5 75 8 025 04 80 4 M PT K 80 4,0 8 ,8 43 2x3 69 x6 10 8 525 04 80 5 M PT K 80 5,5 1 1,0 43 2x3 69 x6 35 1 0025 04 90 7 M PTK 10 5 7,5 1 5,0 53 4x4 57 x6 70 1 4025 04 91 1 M PTK 10 5 1 1, 0 2 1,5 53 4x4 57 x7 20 1 6025 04 91 5 M PTK 10 5 1 5, 0 2 9,0 53 4x4 57 x7 30 2 0025 04 91 8 M PTK 10 5 1 8, 5 3 5,0 53 4x4 57 x7 30 2 1025 04 61 8 M PTK 15 0 1 8, 5 3 5,0 74 0x5 80 x7 75 2 7025 04 62 2 M PTK 15 0 2 2, 0 4 3,0 74 0x5 80 x8 70 3 3025 04 63 0 M PTK 15 0 3 0, 0 5 7,0 74 0x5 80 x8 70 3 60
Landia slurry pump type TPG and MPG
Pipe dimension: 4” (ø114), 5” (ø140) or 6” (ø168). Performance and specifications: (Valid in water) Rated Consumption at Weight Performance at 4 m head Article power 3x400 V approx. Pump Thin Medium Very thick Max no. kW amp kg type l/min. l/min. l/min. Head, m
*Power requirement for 4”/5” TPG-pumps at 540 rpm on the power take off. **Power requirement for 6” TPG-pumps at 1000 rpm on the power take off.
Pump diagrams:
The diagrams are applicable for water (0% dry matter content)
Standard slurry pumps are supplied with right angle gears or electric motors, as well as auger and knife system. Drainage pipe, bottom flushing equipment, two-way tap and PTO shaft are available as optional equipment. The text and the technical data given must not be reproduced partly or completely without permission from Landia A/S. We reserve the right to make technical alterations. 2102GB-01-07-13
Head office: UK-Branch: Landia A/S Landia (UK) Ltd. Industrivej 2 Waymills Industrial Estate DK-6940 Lem St. Whitchurch, Shropshire SY13 1TT Tel.: +45 97 34 12 44 Tel.: 01948 661 200 Fax: +45 97 34 16 98 Fax: 01948 661 201 e-mail: [email protected] Email: [email protected] www.LandiaWorld.com www.landia.co.uk
2109 40 2 2 0* -- 3 00 TPG4 56 00 475 0 2 800 21 ,52004 42 2 5,5 11,0 3 00 M PG5,5/4 23 00 195 0 1 150 9,52004 42 3 7,5 15,0 3 00 M PG7,5/4 32 00 270 0 1 600 10 ,52004 42 4 11 ,0 21,5 3 00 MP G11/4 41 00 350 0 2 050 14 ,52004 42 5 15 ,0 29,0 3 00 MP G15/4 48 00 410 0 2 400 17 ,02004 43 0 18 ,5 35,0 3 00 M PG18 ,5/4 52 00 450 0 2 550 19 ,5
2109 50 2 2 6* -- 3 50 TPG5 58 50 525 0 3 500 21 ,52004 52 3 11 ,0 21,5 3 50 MP G11/5 42 00 375 0 2 500 14 ,52004 52 4 15 ,0 29,0 3 50 MP G15/5 48 50 435 0 2 900 17 ,02004 52 5 18 ,5 35,0 3 50 M PG18 ,5/5 55 00 495 0 3 300 19 ,52004 53 4 22 ,0 43,0 3 70 MP G22/5 57 00 510 0 3 400 20 ,5
2109 60 3 3 7** -- 4 00 TPG6 76 50 725 0 5 350 23 ,02004 62 1 15 ,0 29,0 4 00 MP G15/6 51 00 485 0 3 550 17 ,02004 62 3 18 ,5 35,0 4 00 M PG18 ,5/6 57 50 545 0 4 000 19 ,02004 62 4 22 ,0 43,0 4 00 MP G22/6 63 50 600 0 4 450 20 ,02004 62 5 30 ,0 57,0 4 00 MP G30/6 70 00 665 0 4 900 21 ,0
Landia slurry pump type TPG and MPG
Pipe dimension: 4” (ø114), 5” (ø140) or 6” (ø168). Performance and specifications: (Valid in water) Rated Consumption at Weight Performance at 4 m head Article power 3x400 V approx. Pump Thin Medium Very thick Max no. kW amp kg type l/min. l/min. l/min. Head, m
*Power requirement for 4”/5” TPG-pumps at 540 rpm on the power take off. **Power requirement for 6” TPG-pumps at 1000 rpm on the power take off.
Pump diagrams:
The diagrams are applicable for water (0% dry matter content)
Standard slurry pumps are supplied with right angle gears or electric motors, as well as auger and knife system. Drainage pipe, bottom flushing equipment, two-way tap and PTO shaft are available as optional equipment. The text and the technical data given must not be reproduced partly or completely without permission from Landia A/S. We reserve the right to make technical alterations. 2102GB-01-07-13
Head office: UK-Branch: Landia A/S Landia (UK) Ltd. Industrivej 2 Waymills Industrial Estate DK-6940 Lem St. Whitchurch, Shropshire SY13 1TT Tel.: +45 97 34 12 44 Tel.: 01948 661 200 Fax: +45 97 34 16 98 Fax: 01948 661 201 e-mail: [email protected] Email: [email protected] www.LandiaWorld.com www.landia.co.uk
2109 40 2 2 0* -- 3 00 TPG4 56 00 475 0 2 800 21 ,52004 42 2 5,5 11,0 3 00 M PG5,5/4 23 00 195 0 1 150 9,52004 42 3 7,5 15,0 3 00 M PG7,5/4 32 00 270 0 1 600 10 ,52004 42 4 11 ,0 21,5 3 00 MP G11/4 41 00 350 0 2 050 14 ,52004 42 5 15 ,0 29,0 3 00 MP G15/4 48 00 410 0 2 400 17 ,02004 43 0 18 ,5 35,0 3 00 M PG18 ,5/4 52 00 450 0 2 550 19 ,5
2109 50 2 2 6* -- 3 50 TPG5 58 50 525 0 3 500 21 ,52004 52 3 11 ,0 21,5 3 50 MP G11/5 42 00 375 0 2 500 14 ,52004 52 4 15 ,0 29,0 3 50 MP G15/5 48 50 435 0 2 900 17 ,02004 52 5 18 ,5 35,0 3 50 M PG18 ,5/5 55 00 495 0 3 300 19 ,52004 53 4 22 ,0 43,0 3 70 MP G22/5 57 00 510 0 3 400 20 ,5
2109 60 3 3 7** -- 4 00 TPG6 76 50 725 0 5 350 23 ,02004 62 1 15 ,0 29,0 4 00 MP G15/6 51 00 485 0 3 550 17 ,02004 62 3 18 ,5 35,0 4 00 M PG18 ,5/6 57 50 545 0 4 000 19 ,02004 62 4 22 ,0 43,0 4 00 MP G22/6 63 50 600 0 4 450 20 ,02004 62 5 30 ,0 57,0 4 00 MP G30/6 70 00 665 0 4 900 21 ,0
