Lg 29fs2alx-Zg Chassis Cw62a

Embed Size (px)

Citation preview

  • COLOR TVSERVICE MANUAL

    CAUTIONBEFORE SERVICING THE CHASSIS,READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

    CHASSIS : CW62A

    MODEL: 29FS2AL/ALXMODEL: 29FS2AL/ALX-ZG

    website:http://biz.LGservice.come-mail:http://www.LGEservice.com/techsup.html

  • - 2 -

    CONTENTS

    Contents...................................................................................................................2

    Safety Precautions..............................................................................................3

    Control Descriptions..........................................................................................4

    Specifications........................................................................................................7

    Adjustment Instructions .................................................................................8

    Trouble Shooting ................................................................................................14

    Printed circuit board.........................................................................................18

    Block Diagram .....................................................................................................20

    Exploded View....................................................................................................22

    Exploded View Parts List .............................................................................23

    Replacement Parts List .................................................................................24

    SVC. Sheet..................................................................................................................

  • - 3 -

    SAFETY PRECAUTIONS

    Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by inthe Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual toprevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

    General Guidance

    An isolation Transformer should always be used duringthe servicing of a receiver whose chassis is not isolated fromthe AC power line. Use a transformer of adequate power ratingas this protects the technician from accidents resulting inpersonal injury from electrical shocks.

    It will also protect the receiver and it's components from beingdamaged by accidental shorts of the circuitry that may beinadvertently introduced during the service operation.

    If any fuse (or Fusible Resistor) in this TV receiver is blown,replace it with the specified.

    When replacing a high wattage resistor (Oxide Metal FilmResistor, over 1W), keep the resistor 10mm away from PCB.

    Keep wires away from high voltage or high temperature parts.

    Due to high vacuum and large surface area of picture tube,extreme care should be used in handling the Picture Tube.Do not lift the Picture tube by it's Neck.

    X-RAY Radiation

    Warning:

    To determine the presence of high voltage, use an accuratehigh impedance HV meter.

    Adjust brightness, color, contrast controls to minimum. Measure the high voltage. The meter reading should indicate 23.5 1.5KV: 14-19 inch, 26 1.5KV: 19-21 inch,29.0 1.5KV: 25-29 inch, 30.0 1.5KV: 32 inchIf the meter indication is out of tolerance, immediate serviceand correction is required to prevent the possibility ofpremature component failure.

    Before returning the receiver to the customer,

    always perform an AC leakage current check on the exposedmetallic parts of the cabinet, such as antennas, terminals, etc.,to be sure the set is safe to operate without damage ofelectrical shock.

    Leakage Current Cold Check(Antenna Cold Check)With the instrument AC plug removed from AC source,connect an electrical jumper across the two AC plug prongs.Place the AC switch in the on position, connect one lead ofohm-meter to the AC plug prongs tied together and touch otherohm-meter lead in turn to each exposed metallic parts such asantenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, themeasured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis thereading must be infinite.An other abnormality exists that must be corrected before thereceiver is returned to the customer.

    Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet.Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitorbetween a known good earth ground (Water Pipe, Conduit, etc.)and the exposed metallic parts.Measure the AC voltage across the resistor using ACvoltmeter with 1000 ohms/volt or more sensitivity.Reverse plug the AC cord into the AC outlet and repeat ACvoltage measurements for each exposed metallic part. Anyvoltage measured must not exceed 0.75 volt RMS which iscorresponds to 0.5mA.In case any measurement is out of the limits specified, there ispossibility of shock hazard and the set must be checked andrepaired before it is returned to the customer.

    Leakage Current Hot Check circuit

    The source of X-RAY RADIATION in this TV receiver is theHigh Voltage Section and the Picture Tube.For continued X-RAY RADIATION protection, thereplacement tube must be the same type tube as specified inthe Replacement Parts List.

    1.5 Kohm/10W

    To Instrumentsexposed METALLIC PARTS

    Good Earth Groundsuch as WATER PIPE,CONDUIT etc.

    AC Volt-meter

    IMPORTANT SAFETY NOTICE

    0.15uF

  • - 4 -

    DESCRIPTION OF CONTROLS

    All the functions can be controlled with the remote control handset.Some functions can also be adjusted with the buttons on the frontpanel of the set.

    Remote control handsetBefore you use the remote control handset, please install the bat-teries. See the next page.

    1. POWERswitches the set on from standby or off to standby.

    2. NUMBER BUTTONSswitches the set on from standby or directly select a number.

    3. MENUselects a menu.

    4. DD / EE (Programme Up/Down)selects a programme or a menu item.switches the set on from standby.scans programmes automatically.FF / GG (Volume Up/Down)adjusts the volume.adjusts menu settings.OKaccepts your selection or displays the current mode.

    5. TELETEXT BUTTONS (option)These buttons are used for teletext.For further details, see the Teletext section.

    6. SLEEPsets the sleep timer.

    7. PIP BUTTONS (option)PIPswitches the sub picture on or off.PR +/-selects a programme for the sub picture.SWAPalternates between main and sub picture.INPUTselects the input mode for the sub picture.SIZEadjusts the sub picture size.STILLfreezes motion of the sub picture.POSITIONrelocates the sub picture in clockwise direction.9/4 PIPswitches on or off the 9 or 4 sub pictures.

    (With TELETEXT / PIP)

    POWER MUTE

    1 2 3

    4 5 6

    7 8 9

    MENU TV/AV0

    PR

    PR

    OK VOLVOL

    TV

    SWAP INPUT

    PR+PR-

    TEXT/MIX/

    SIZE/PIP 9/4PIP i

    XM POSITION/ STILL/

    REVEAL/ ?

    SLEEPMODE/

    EYE/

    TIME/

    FAVOURITE I/II/

    1

    2

    3

    4

    6

    5

    13

    7

    89

    10

    11

    12

    14

    PR

    TEXT/MIX/

    SIZE/ INDEX/ i

    XM UPDATE/ HOLD/

    REVEAL/ ?

    SLEEPMODE/

    TIME/

    FAVOURITE EYE/

    I/II/

    Q.VIEW LIST

    (With TELETEXT / Without PIP)

    5

  • - 5 -

    8. FAVOURITEselects a favorite programme.

    9. EYE/*

    (option)switches the eye function on or off.

    10. MUTE switches the sound on or off.

    11. TV/AVselects TV or AV mode.switches the set on from standby.exits the Teletext mode

    12. I/II/*selects the language during dual language broadcast.

    selects the sound output (option).13. Q.VIEW (or YELLOW)

    returns to the previously viewed programme.

    14. LIST (or BLUE)displays the programme table.

    *: No function

    COLOURED BUTTONS : These buttons are used for teletext (onlyTELETEXT models) or programme edit.

    (Without TELETEXT / PIP)

    PR

    PR

    OK VOLVOL

    SWAP INPUT

    PR+PR-

    SLEEP

    FAVOURITE

    POSITION 9/4PIP

    STILL

    PIP

    SIZE

    EYE/ I/II/

    (With PIP / Without TELETEXT)

    POWER MUTE

    1 2 3

    4 5 6

    7 8 9

    MENU TV/AV0

    PR

    PR

    OK VOLVOL

    SLEEP

    FAVOURITE

    EYE/ I/II/

    Q.VIEW LIST

    1

    2

    3

    4

    13

    69

    8

    10

    11

    12

    14

    7

  • - 6 -

    1. MAIN POWER (ON/OFF)switches the set on or off.

    2. POWER/STANDBY INDICATORilluminates brightly when the set is in standbymode.dims when the set is switched on.

    3. MENUselects a menu.

    4. OKaccepts your selection or displays the currentmode.FF / GG (Volume Down/Up)adjusts the volume.adjusts menu settings.DD / EE (Programme Up/Down)selects a programme or a menu item.switches the set on from standby.

    5. REMOTE CONTROL SENSORNote : Only use the supplied remote controlhandset. (When you use others, theyll be notable to function.)

    6. AUDIO/VIDEO IN SOCKETS (AV IN3)Connect the audio/video out sockets ofexternal equipment to these sockets.

    7. EYE (option)adjusts picture according to the surroundingconditions.

    Front panel

    Side panel

    VIDEO

    L/M

    ONO

    RAUDIO

    AV IN3

    6ON/OFFON/OFF

    1

    2 75

    3

    4

  • - 7 -

    SPECIFICATIONSNote : Specification and others are subject to change without notice for improvement.

    V ScopeThis specification can be applied to all the television related toCW62A Chassis.

    V Test and Inspection Method1) performance : Follow the Standard of LG TV test2) Standards of Etc. requirement

    - Safety: IEC60065- EMC: EN55020,EN55013

    V Test Condition1) Temperature : 20 5C(CST : 40 5C)2) Relative Humidity : 65 10%3) Power voltage : AC110-240V~, 50/60Hz4) Follow each drawing or spec for spec and performance of

    parts,based upon P/N of B.O.M5) Warm up TV set for more than 20min. before the

    measurement.

    No

    1

    2

    3

    4

    5

    6

    7

    8

    Item

    Receiving System

    Available Channel

    Input Voltage

    Market

    Screen Size

    Tuning System

    Operating Environment

    Storage Environment

    Remark

    EU/ Non EU

    OPTION

    Non EU/ EU

    NTSC-M

    Non EU

    EU

    200 PR(W/O TXT)

    Specification

    PAL,SECAM BG

    PAL/SECAM DK

    PAL-I/I

    NTSC M

    NTSC 4.43(AV)SECAM-L/L

    NTSC M/ PAL M/N

    VHF : E2 ~ E12

    UHF : E21 ~ E69

    CATV : S1 ~ S20

    HYPER : S21 ~ S41

    VHF : 02 ~ 13

    UHF : 14 ~ 69

    CATV : 02 ~ 13

    AC 110-240V, 50/60Hz

    AC 230V, 50/60Hz

    EU,CIS, China, Asia, Africa

    Flat 29

    FVS 100Program

    1) Temp : 0 ~ 45 deg2) Humidity : below 85%1) Temp : -20 ~ 60 deg2) Humidity : below 85%

    V General Specification

  • 1. Application ObjectThese instructions are applied to all of the color TV, CW62A.

    2. Notes(1) Because this is not a hot chassis, it is not necessary to use

    an isolation transformer. However, the use of isolationtransformer will help protect test instrument.

    (2) Adjustment must be done in the correct order.But theadjustment can be changed by consideration of massproduction.

    (3) The adjustment must be performed in the circumstance of255C of temperature and 6510% of relative humidity ifthere is no specific designation.

    (4) The input AC voltage of the receiver must keep ratingvoltage in adjusting.

    (5) The receiver must be operated for about 15 minutes priorto the adjustment.

    (6) Signal: Received, the standard color signal.(65dB1dB uV)LG standard signal means the digital pattern(PAL_EU 05CH).

    3. Focus adjustment(1) Receive the Cross-Hatch Pattern(Fig 1).(2) Set the picture condition on DYNAMIC(CLEAR) mode.(3) Adjust the Focus volume of FBT for the best focus of (A) &

    (B).

    4. Purity & Convergence adjustmentAdjustment should be operated when using the CPT(withoutITC from CPT manufacturing place)This adjustment must be done in the order of the followingflowchart.

    4.1. Color purity adjustment(1) It makes CPT or CABINET enough to demagnetization. (2) Receive the signal of red raster.(3) Loosen fixed screw of DY and closely to CPT funnel part.(4) Check the center of screen that PURITY MAGNET of CPT

    by crossing adjustment. At this time, 4 & 6 pole magnet islocated to magnet of nothing.

    (5) Move the DY to make equal red on whole screen and itdoes not to make the DY by fixed screw after check asimple color of Red/Green/Blue and white raster whether ornot it is a pollution of color.(At this time, take care raster of screen and DY must fixingin the condition which maintains a horizontality.)

    (6) Check the TV set by move direction.

    4.2. Convergence adjustmentThese adjustments can the best condition of focus afterfinished purity adjustment.

    (1) Receive the signal of cross hatch that BACK RASTER isblack.

    (2) Adjust brightness and luminosity till dot appear 9 ~12.(3) Open angle of the two tab of 4 pole MAGNET by isogonic

    angle and accord with vertical line of red and blue color inthe middle of screen.

    (4) Maintain as angle of (3) and rotate the tab to accord withvertical line of Red and Blue color in the middle of screen.

    - 8 -

    ADJUSTMENT INSTRUCTIONS

    A B

    Assembling DY toCPT

    CPT Assembling As preparatory operations beforeassembling CPT, wind cotton Tape forprotecting to CPT NECK and DY, CPTconnection parts. At this moment, endof tape should be over-lapped andwound in direct route to the NECK.

    Let the screen Standard condition.Operate Heat-Run at least 15minutes.

    Torque is to be 9-11 kg f.cm whenfixing DY.

    Fix the Magnet to the position asshown picture below. Be careful not tomake CPT neck shadow whileadjusting DY.HEAT RUN

    Degaussing

    STC Pre-Adjustment

    PURITY Adjustment

    DY Fixing

    SCREEN Voltage adj.

    W/B Fixing

    FOCUS not yet ADJ.

    STC not yet ADJ.

    DYC not yet ADJ.

    Convergence Magnet

    15 ~ 20mm

    6Pole 4 2

  • (5) Open angle of the two tab of 6 pole magnet by isogonicangle and accord with vertical line of Red/Blue and Green.

    (6) Maintain as angle of (5) and rotate the tab to accord withhorizontal line. In case of twisted horizontal line,repeatadjustment of (3) ~ (5) remembering the movement ofRed/Green/Blue color.

    (7) Move the DY to best condition of convergence and attachthe CPT to a rubber-chock for fixing DY.

    5. Screen voltage adjustment(1) Receive the PAL or SECAM(NTSC) signal into RF mode

    (regardless of channel).(2) If you press the ADJbutton in LINE SVC mode(IN-START

    button),the LINE SVC mode changes to screen adjustmentmode.

    (3) Turn the Screen Volume of FBT to change luminance ofWhite signal center as shown below.

    (4) Press the ADJ button to exit SVC mode.

    6. White balance adjustmentNOTE : When adjusting white balance automatically,connect the

    adjustment JIG in SVC mode.(When pressing IN-START,MUTE button on remote control for adjustmentorderly,it is changed to CPU OFF mode and screen isdisplayed to CPU OFF.)

    (1) Receive 100% white pattern.(2) Adjust LOW Light status(4.5FL) of CR(R CUT), CB(B CUT)

    at CG(G CUT:75) : 60.(3) Adjust HIGH Light status(35FL) of WR(R DRIVE), WB(B

    DRIVE) at WG(G DRIVE:380) : 450.(4) Repeat above step (2) and (3) for the best condition each

    status of High Light and Low Light.

    7. Deflection setting Data Adjustment7.1 Adjustment preparation

    (1) Tune the TV set to receive an Digital pattern(EU05CH).(2) Deflection setting data adjustment is operate by SVCcommunicator.

    (3) Enter the deflection mode by selection SERVICE2 key onSERVICE MENU after enter the adjustment mode bypressing LINE SVC MODE(IN-START KEY).

    (4) Use the CH D ,E key to select adjustment item.(5) Use the VOL F ,G key to increase/decrease data.

    7.2 Adjustment

    - When adjusting a deflection,adjust N50Hz of PAL signal first andadjust a deflection data at N60Hz(NTSC), Z60Hz, N50Hz,W50Hz, Z50Hz.

    - After finishing deflection adjustment, press the ENTERbutton to enter or exit SVC mode.

    (1) H SHIFTAdjust so that the geometric horizontal center line is inaccord with horizontal center line of CPT.

    (2) H PARALLELAdjust vertical inclination of screen.

    (3) H BOWAfter finishing Cushion adjustment, adjust curved rate oftop & bottom corner to be equal.

    (4) V LINEARAdjust the top & bottom size of inner circle to be equal.

    (5) V SCROLLAdjust so that the geometric vertical center line is in accordwith vertical center line of CPT.

    2. White balance IIC Parameter(Address)

    Program

    Sub Add

    Start Bit

    Stop Bit

    Offset

    Polarity

    EP_Rom_S

    B(R)_AmpWin31_wb TWB

    20

    5

    0

    0

    1

    36

    B(R)_CutWin31_wb TWB

    17

    5

    0

    0

    1

    33

    G_Amp

    Win31_wb TWB

    21

    5

    0

    2

    0

    37

    - 9 -

    MenuXY

    Color Temperature

    288295

    9000oK

    268273

    13000oK

    EU N-EU White Balance Color analyzer

    Menu

    BLO-R(R CUT)BLO-G(G CUT)BLO-B(B CUT)RG(R DRIVE)GG(G DRIVE)BG (B DRIVE)

    LOW LIGHT

    HIGH LIGHT

    0 ~ 630 ~ 630 ~ 630 ~ 630 ~ 630 ~ 63

    3232FIX323232

    Range DATA White Balance Initial Data

    White Balance Initial Data1. IC

    VCD ICEP_ROM 0 0 0 0

    Name Maker Algorithm

    Program

    Vcd Slave

    Win31_wb TWB

    8A Eeprom_Slave

    Win31_wb TWB

    A0

    Speed

    1

    Delay

    30

    G_Cut

    Win31_wb TWB

    18

    5

    0

    2

    0

    34

    Speed/ Plus 2 2 2 2

  • (6) EW WIDTHAdjust until the outmost left and right lattice of receivedpattern is accord with 25% of other lattice width.

    (7) EW PARABOLAAdjust so that middle portion of the outermost left and rightvertical line look like parallel with vertical lines of the CPT.

    (8) EW UPCORNER & (9) EW LOCORNERAfter finished cushion adjustment, adjust vertical line of left-top, right-top, left-bottom, right-bottom of screen to the beststraight line.

    (10) EW TRAPEZOIDAdjust to make the length of top horizontal line same with itof the bottom horizontal line.

    (11) V SLOPE(12) V AMPLITITUE

    Adjust so that the circle of a digital circle pattern should belocated interval of 6~7mm from the effective screen of theCPT.

    (13) S CORRECTIONAdjust so that all distance between each lattice width oftop/center/bottom are to be the same.

    (14) V SHIFTAdjust so that the geometric vertical center line is in accordwith vertical center line of CPT.

    (15) V ZOOM (VERTICAL ZOOM)(16) PIP_H(PIP H Position) adjustment - option

    Adjust the H-Position by using VOL +/- key until PIP pictureis in contact with main picture.

    8. Deflection setting initial data Deflection setting initial data (SERVICE 2)* Fix : Dont change data

    - After finishing deflection adjustment at PAL 50Hz, NTSC 60Hzis applied deflection compensation value. But recheck conditionof adjustment at NTSC system and adjust deflection data ifnecessary.

    - Adjust PIP Position adjustment at only PAL 50Hz.

    - 10 -

    PAL Digital pattern (EU05CH)

    PIP H Position

    343232443057154550252529305425000

    50Hz 60Hz

    Cross-Hatch Pattern(E-7CH)

    CRNU

    CRNL

    CRNU6

    EP

    CRNL6

    Item

    H-SHIFTH PARALL

    H BOWV LINEARV SCROLLEW WIDTHEW PARABEW UPCOREW LOCOREW TRAPEV SLOPEV AMPLIT

    SCORRECTV SHIFTV ZOOM

    V SYNSLIOVRVOLINVGUARD

    Horizontal shiftHorizontal parallelogramBowVertical linearityVertical scrollEW widthParabola adjUpper corner adjLower corner adjTrapezoid adjVertical slopeVertical amplitudeS correctionVertical shiftVertical zoomVertical slicing levelOver voltage input modeVertical guard mode

    243232413057184953251734354625000

    AdjustRecommendRecommendRecommend

    AdjustAdjustAdjustAdjustAdjustAdjust

    RecommendRecommendRecommendRecommend

    FixFixFixFix

    Description 29 Adjust

  • 9. Service adjustment data table Picture setting service data1 (SERVICE 1)

    Picture setting service data2 (SERVICE 3)

    OPTION 1, 2, 3, 4

    - 11 -

    AGCRGGGBG

    BLO-RBLO-GCDL

    L-DLYPEAK

    SHOOT

    ITEM DESCRIPTIONACG take overRed GainGreen GainBlue GainBlack level offset RedBlack level offset GreenCathode Drive LevelLuminance delay timePeak white limitingPre overshoot ratio

    29 S-SLIM2532323232325

    1311

    AM DEM GFM DEM GADC LEVDEC LEV

    MONO LEVNICAMLEVAUX1 VOLAUX2 VOLAUX3 VOL

    FMWINDOWBOOSTVAL

    MAXVOLDCXO VAL

    ITEM DESCRIPTIONAM DEMODULATOR GAIN-AMLOWFM DEMODULATOR GAIN-AGNADC LEVEL(-16~5) - ADCLEVDEC LEVEL(-16~5) - DECLEVMONO LEVEL(-16~5) - MONOLEVNICAM LEVEL(-16~5) - NICLEVAUX1 VOL - AUX1VOLL(R)AUX2 VOL - AUX2VOLL(R)AUX3 VOL(SCART1 RF SOUND OUT)FM WINDOW FILTER (FMWS)BOOSTERMAX VOLUMEDCXO

    29 S-SLIM00000000000

    10063

    ITEM

    INCH

    SYSTEM

    200PR

    TOP

    ACMS

    CH-AU

    BOOSTER

    SOUND

    PIP

    VOL CURVE

    A2 STEREO

    I/II SAVE

    HIDEVIAT (High deviation)SCART

    DVD

    XWAVE

    EYE

    4KEY

    TILT

    DEGAUSS (Degaussing)OSD LANG

    TXT LANG

    REMOCON

    HOTEL

    TURBOSCH (Turbo search)TURBOP/S (picture/sound)DCXO/A (DCXO auto adjust)

    OPTION1

    OPTION2

    OPTION3

    OPTION4

    Description

    29 S-Slim/ 29 N-Flat

    BG/DK/I/M, BG/DK/I/L

    W/O TXT=>200PR, W/TXT=>100PR

    TOP=>Germany, Swiss, Austria, Italy

    Auto channel memory system

    China & Australia Frequency table

    RF stereo / AV stereo / Mono option

    PIP option

    High / Low volume curve

    Nicam check & FM stereo / Dual

    Dual sound setting save

    Sound high deviation

    SCART option

    DVD option

    FM TX option

    EYE option

    4 Key option

    TILT option

    Degaussing option

    Refer to the next page(table.8)Refer to the next page(table.8)

    HOTEL option

    Turbo search

    Turbo picture/ sound

    DCXO auto adjust

  • OSD & TEXT LANGUAGES

    - 12 -

    SOUTHEAST ASIA

    EAST EU CYRILLIC TEXT

    WEST EU GREEK TEXT

    01

    23456701

    2

    3456701

    2

    3

    4567

    01234

    0123456701

    01234560123456789

    101101

    ENGLISH

    RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDRESERVEDENGLISHEAST EU ALL

    ENGLISH RUSSIAN

    RESERVEDRESERVEDRESERVEDRESERVEDRESERVEDENGLISHEU 7EA

    WEST EU ALL

    ENGLISH GREEK

    RESERVEDRESERVEDRESERVEDRESERVED

    ENGLISHINDONESIANMALAYVIETNAMESETHAI

    ENGLISHGERMANRUMANIANPOLISHHUNGARIANCZECHRUSSIANBULGARIANENGLISHRUSSIAN

    ENGLISHGERMANFRENCHITALIANSPANISHDUTCHPORTUGUESEENGLISHGERMANFRENCHITALIANSPANISHDUTCHSWEDISHNORWEGIANDANISHFINNISHPORTUGUESEGREEKENGLISHGREEK

    0

    1

    3

  • - 13 -

    ARAB TEXT

    PARSI TEXTSOUTHEAST W/O TEXTWEST EU W/O TEXTEAST EU W/O TEXTARAB W/O TEXTCHINA, INDIA W/O TEXT

    01

    2

    3

    4567

    01

    2

    34567

    ENGLISHARABIC

    PARSI

    ARAB ALL

    RESERVEDRESERVEDRESERVEDRESERVEDThe same ARAB TEXTThe same SOUTHEAST ASIA TEXTThe same WEST EU GREEK TEXTThe same EAST EU CYRILLIC TEXTThe same ARAB TEXTENGLISHCHINA

    HINDI

    RESERVEDRESERVEDRESERVEDRESERVEDRESERVED

    ENGLISHFRENCHARABURDUENGLISHFRENCHARABPARSIENGLISHFRENCHARABURDUPARSI

    ENGLISHCHINESEENGLISHHINDI

    0123012301234

    0101

    3

    456789

    10. How to inspect condition of atransmission and reception in FMTRANSMISSION MODEL

    - FM TRANSMITTERs efficiency inspections is executed to afinished in a final inspection phase.- FM TRANSMITTER is a function which receives voice-signal by an exclusive remote control and Earphone, transmitsa FM through transmitter of inner part in MICOM BOARD toTV sound(MONITOR OUTPUT)

    1) Execute in channel generating voice-signal2) Select a transmitted frequency in MENU OSD.

    MENU => SOUND => TRANSMITTER => frequencyselection (87.7MHz)

    3) A received frequency in an exclusive remote control orreceived FM Radio is tuned by 87.7MHz(107.7MHz) whichis same as frequency in OSD.

    4) Check out whether a signal generating to MAIN SPEAKERgenerates in earphone or receiver or not.

    5) There is no alternation and setting of adjusted DATA in theprocess of inspecting FM TX.

    11.OPTION Adjustment 1) This option adjustment decides function in accordance with

    model. Press IN-START button at SVC mode, then adjustthe option at OPTION1,2,3,4,5 mode.

    2) Mark the option adjustment data like [112,68,164,32,8] inBOM.

    * Mark of BOM

    LEVEL PART NO. SPECIFICATION DESCRIPTION1. 3141VMN382A MAIN CHASSIS ASSY [112,68,164,32,8]

    In this model, the OPTION1 data is 112, OPTION2 data is 68, theOPTION3 data is 164,the OPTION 4 data is 32, OPTION 5 datais 8.

  • TROUBLE SHOOTING

    - 14 -

    1. RF-STEREO MODEL1) PICTURE OK / NO SOUND

    Check/ Replace TU101 or Input signalNO

    OK

    Selected correct system in menu

    Check the waveform IF 1 of TU101

    Check the voltage at pin 3, 9, 16, 43,86, 88, 90 of UOCIII

    NOCheck/ Replace IC501

    NO

    Check the voltage at pin 57, 58 ofUOCIII

    NO

    OK

    Check the waveform at pin 4, 5 of IC501

    OK

    Check the waveform at pin 4, 12 ofIC601

    Check/ Replace Q603NO

    OK

    Check the waveform at pin 6 of IC601

    Check/ Replace IC601NO

    OK

    Check the waveform at pin 1, 2, 14, 15of IC601

    Check/ Replace R823, D826

    Check the Heater voltage ofCPT(6~6.4 Vrms)

    Check R, G, B out of CPT board

    Check IC901,P402ACheck 197V line of CPT Board &if no problem check and Replace

    Check the Heater pulse of FBT T402

    Check RF901, P402,P402B, FR401

    Check FBT T402

    Check HV, Screen voltage of CPT

    Check FBT T402

    NO

    OK

    Check the waveform at pin 3, 13 ofIC601

    2) No Raster / Sound OK(1/2)

  • - 15 -

    3) No Raster (2/2)

    Check the in/out ofr egu la to r ( IC822 ,IC823, IC824)Check pin 73 ofIC501(H_Out)

    Check the voltage ofC832

    Check/ Replace Fuse

    Is the voltage eachpin voltage of IC501

    Check Fuse of AC line

    Check/ ReplaceIC501

    Check T401 & eachpin voltage

    Check Q401 collectwaveform

    Check & ReplaceT402

    Check the voltagepin4 of IC810

    Check/ ReplaceIC810, IC802, Q830

    Check Fuse and Diode of secondaryLoad of SMPS trans(T801)

    Check the B+ at D829cathode

    OPEN

    Check/ Replace DB801

    NO

    Check/ Replace Fuse and IC810

    NO

    OK

    NO

    Normal Abnormal

    Check/ ReplaceQ402

    Check/ ReplaceT401

    Check/ ReplaceQ401

    Check Q402collector waveform

    Check/ Replace IC501

    NO

    OK

  • - 16 -

    4) No Picture/ No Sound

    Is any OSD displayed?

    OK

    NO

    NO

    OK

    OK

    NO NO

    OK

    OK

    NO

    OK

    OK

    OK

    P13A (R, G, B out ofIC501)

    P13A (R, G, B out ofIC501)

    Replace IC501

    Check pin8, 12 SCL,SDA

    Check IC12(EEPROM)& SCL, SDA, Line

    Check pin3 ResetVoltage

    Check IC501 pin 83,84, 85 (R, G, B out)

    Check SMPS TransSecondary Voltage

    Go to No sound/picture OK

    Check the waveformpin73(H-out)

    Check IC501 pin 83,84, 85 (R, G, B out)

    Check receiving system in MENU& execute Auto - Program

    Does the auto - Programoperate properly

    Store on manual -program MENU

  • - 17 -

    2. AV STEREO/ MONO MODEL

    Select correct system in menu

    OK

    OK

    OK OKNO

    NO

    Does the auto - Programoperate properly Check TU101 Tuner

    Check the voltage of pin3, 9,16, 43, 86,88,90 of IC501

    Check the waveform atpin57, 58 of IC501

    OK

    Check the signal line of SPK-N,PCheck the waveform atpin4, 12, of IC601

    NO

    NO

    OK

    Check pin5 (mute) of IC501Check the waveform atpin6 of IC601

    OK

    NO

    NO

    Check the connection of AVequipment

    AV

    OK

    OK

    Check the connection of sideor Front AV Board P201A

    Check the voltage atpin3, 13, of IC601

    Check/ ReplaceR823, D826

    Correct the Board

    Check the waveform atpin1, 2, 14, 15 of IC601

    Replace IC601

  • - 18 -

    PRINTED CIRCUIT BOARDMAIN

  • - 19 -

    LED + PRE-AMPDEFLECTION

    HARMONICS

    SIDE-A/V

    CONTROLPOWER

  • BLOCK DIAGRAM

    - 20 -

  • MEMO

    - 21 -

  • - 22 -

    EXPLODED VIEW

    112

    913

    170 150

    400943

    P1112

    503

    501

    520

    580

    120

    310530

    600

    540331

    330320

    300

    590

    550

  • - 23 -

    EXPLODED VIEW PARTS LIST

    LOCA. No. PART No. DESCRIPTIONS112 6335929005A CPT,ITC A68ERS870X 02 N(+0.40G) 0G LG-PHILIPS DISPLAYS 29INCH 1H SUPER SLIM

    6335929005L CPT,ITC A68ERS870X 02 L(+0.50G) 0G LG-PHILIPS DISPLAYS 29INCH 1H SUPER SLIM120 6400VA0025E Speaker,Fullrange C163A01K1451 FERRITE 15W 8OHM 86DB 110HZ 193X57X44.4mM LUG

    EAB3082850 Speaker,Fullrange C163A01K1451. ND 15W 8OHM 86DB 110HZ 193 X 57 X 44.4 LUG

    150 6140VC2007T Coil,Degaussing 23OHM AL 80T 0.65mM SQUARE 29INCH 3250mM WIRE=300mM

    170 170-844K Drawing,Assembly CPT EARTH UL1015 AWG22-TBC 0.12X4X16MM 29INCH ALL

    300 30919K0019B Cover Assembly, 29FS2 MA MC049D 29 29FS2 C/A ASSY LGEMA

    ACQ30285802 Cover Assembly, 29FS2 CW62A 29 LGESY 2-TONE W/O EYE SY-CIS #117A SKD

    310 5020900039B Button, CONTROL 29FS2 ABS, HF-380 6KEY LGESY LOCAL 117A

    5020900094A Button, MOLD ABS 380 CONTROL 29FS2 ABS, HF-380 6KEY LGEMA

    320 320-062E Spring, CUTTING STSC304 KNOB

    330 5020900038B Button, POWER 29FS2 ABS, HF-380 1KEY LGESY LOCAL 117A

    5020900093A Button, MOLD ABS 380 POWER 29FS2 ABS, HF-380 1KEY LGEMA

    331 4810900051B Bracket, 29FS2 MC036A ABS, HF-380 LGESY LOCAL 117A

    4810900099A Bracket, MOLD HIPS BOTTOM 29FS2 MC05HB HIPS 51SF LGEMA

    400 3809900145L Cover Assembly, 29FS2ALX CW62A 29 SY-CLS CW62A SKD #117

    3809900199D Cover Assembly, 29FS2 LGEMA CW62A 29 29FS2 B/C ASSY LGEMA

    501 4810900052D Bracket, MAIN 29FS2 MC049D HIPS 407AF LGESY LOCAL 50HZ CUT RIB

    4810900101A Bracket, MOLD HIPS 40AF MAIN 29FS2 MC05HB HIPS 405AF LGEMA

    503 4810900100D Bracket, MOLD HIPS REAR AV 2PHONE 29FS2 CW62A HIPS 51SF LGEMA LOCAL

    4810900104B Bracket, REAR AV 29FS2RLX-TG CW62A HIPS 51SF LGESY LOCAL

    520 EBR30755601 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX-ZG QDRLLBK SY TO KIEV

    EBR30770317 PCB Assembly, MAIN1 M.I CW62A 29FS2AL-ZG QDKLLBA SY TO LGEAK SKD 6871

    EBR30770318 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX-ZG QDLLLCP SY TO MA SKD 6871

    EBR30921805 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX SY-MA-ROMANIA SKD

    EBR30921806 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX SY-MA-POLAND SKD

    EBR30921807 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX SY-MA-HUNGARY SKD

    EBR30921808 PCB Assembly, MAIN1 M.I CW62A 29FS2ALX SY-MA-CZECH SKD

    530 EBR30756001 PCB Assembly, MAIN1 M.I CW62A 29FS2 SY TO CIS SUPER SLIM CONT BOARD

    EBR30924202 PCB Assembly, SUB M.I CW62A 29FS2 CONTROL SY-MA SKD

    540 EBR30756601 PCB Assembly, MAIN1 M.I CW62A 29FS2 SY TO CIS SUPER SLIM POWER BOARD

    EBR30924002 PCB Assembly, SUB M.I CW62A 29FS2 POWER SY-MA SKD

    550 68719SM219A PCB Assembly,Sub SUB M.I MC049D SY-MA HARMONICS CKD

    EBR30691901 PCB Assembly, MAIN1 M.I CW62A 29FB3 SY TO CIS SKD MODEL HANMONIC BOARD

    580 EBR30683001 PCB Assembly, MAIN1 M.I CW62A 29FS4 SY TO CIS SKD DEFLECTION BOARD

    EBR30923602 PCB Assembly, SUB M.I CW62A S/S DEFLECTION SY-MA-POLAND SKD

    590 EBR30758201 PCB Assembly, MAIN1 M.I CW62A SY TO CIS SUPER SLIM LED+PRE AMP BOARD

    EBR30924402 PCB Assembly, SUB M.I CW62A 29FS2 LED+P-AMP SY-MA SKD

    600 EBR30757201 PCB Assembly, MAIN1 M.I CW62A 29FS2 SY TO CIS SUPER SLIM SIDE AV

    EBR30923802 PCB Assembly, SUB M.I CW62A 29FS2 SIDE A/V SY-MA SKD

    913 FAB30021506 Screw Assembly, FAB30021506 TAPTITE P TYPE D7.0 L45.0 RUBBER(D20, T3.2)943 FAB30006309 Screw,Taptite 1SZZ9PB012A TH + P 4MM 16MM MSWR10 FZB

    P1112 174-009E Power Cord Assembly, M4206+YFH800-02+H03VVH2-F 2X0.75MM2 /2.4M/BLK M4206

    174-009P Power Cord Assembly, KKP-419CG/YH YFH-800-02/KLCE-2F

    The components identified by mark iscritical for safety.Replace only with part number specified.

  • - 24 -

    REPLACEMENT PARTS LIST

    LOCA. NO PART NO DESCRIPTION

    D406D407D414D444D606D815D818D820D823D826D828D829D845D846D847D901D902D903D904

    DB801ZD101ZD401ZD401ZD402ZD501ZD502ZD601ZD827ZD910ZD910ZD911ZD911ZD912ZD912

    C103C107C108C109C1103C1111C112C113C115

    C1201C1202C1409C1410

    0DRTW00164B0DD060009AC0DRTW00164B0DD060009AC0DD414809ED0DD414809ED0DD060009AC0DD060009AC0DRTW00141A0DRTW00141A0DD060009AC0DD410000AD0DZ150009AD0DD400509BB0DD060009AC0DD060009AC0DD060009AC0DD060009AC0DR140049AC0DRTW00131C0DZ330009DG0DZ510009BE0DZ510009BF0DZ120009AF0DZ510009DB0DZ820009AH0DZ820009AH0DZ750009AG0DZ510009BE0DZ510009BF0DZ510009BE0DZ510009BF0DZ510009BE0DZ510009BF

    0CE475DK6180CE227DD6180CE475DK6180CE226DK6180CE4763F618

    0CQZVBK002C0CN1030F6790CN1030F6790CN1040K9490CN4710K5190CN4710K5190CF4342U460

    181-013M

    RGP15J 600V 1.3V 5UA 50A 250NSEC DO15TVR06J 600V 1.4V 10UA 25A 300NSEC DO41RGP15J 600V 1.3V 5UA 50A 250NSEC DO15TVR06J 600V 1.4V 10UA 25A 300NSEC DO411N4148 1V 100V 150MA 500MA 4NSEC 500MW1N4148 1V 100V 150MA 500MA 4NSEC 500MWTVR06J 600V 1.4V 10UA 25A 300NSEC DO41TVR06J 600V 1.4V 10UA 25A 300NSEC DO41SFAF504G 200V 975MV 10UA 125A 35NSECSFAF504G 200V 975MV 10UA 125A 35NSECTVR06J 600V 1.4V 10UA 25A 300NSEC DO41RU4AM 600V 1.3V 10UA 70A 400NSEC R4MTZJ15B 15V 13.89TO14.62V 25OHM 500MWUF4005(52MM) 600V 1.7V 10UA 30A 75NSECTVR06J 600V 1.4V 10UA 25A 300NSEC DO41TVR06J 600V 1.4V 10UA 25A 300NSEC DO41TVR06J 600V 1.4V 10UA 25A 300NSEC DO41TVR06J 600V 1.4V 10UA 25A 300NSEC DO411N4004A 500V 1.1V 10UA 30A - DO41TS6P05G 600V 1V 5UA 150A TS6P ST 4P 4GDZJ33B 33V 30.32TO31.88V 65OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWMTZJ12B 12V 11.44TO12.03V 25OHM 500MWMTZJ5.1B 5.1V 4.94TO5.2V 70OHM 500MWMTZJ8.2B 8.2V 7.78TO8.19V 20OHM 500MWMTZJ8.2B 8.2V 7.78TO8.19V 20OHM 500MWMTZJ7.5B 7.5V 7.07TO7.45V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MWGDZ5.1B 5.1V 4.94TO5.2V 20OHM 500MW

    EGR475M050T1G1C11G 4.7uF 20% 50V 50MAEGR227M010T1G1E11G 220uF 20% 10V 255MAEGR475M050T1G1C11G 4.7uF 20% 50V 50MASMS5.0TP50VB22M 22uF 20% 50V 108MAESF476M016T1A5E05G 47uF 20% 16V 60MAPCX2 335 91592 0.22uF 10% 275V MPPRH EP050 Y103M-B-B 10nF 20% 16V X5RRH EP050 Y103M-B-B 10nF 20% 16V X5RCH UP050 F104Z-B-B Z 100nF -20TO+80%RH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PPCMP 389 52434 0.43UF 5% 400V MPPMPP224J2GD 220nF 5% 400V MPP

    LOCA. NO PART NO DESCRIPTION

    IC12IC301IC302IC601IC802IC810IC823IC824IC826IC901Q602Q830

    Q105Q1106Q201Q204Q301Q302Q303Q401Q402Q502Q503Q504Q505Q506Q603Q803Q804Q805Q806Q809Q810Q811Q840

    D101D102D11

    D301D302D401D403D405

    0IAL241610B0IPMGPH002A0IKE455800E0ILNR00189A0ILI817000G

    0IPMG78443A0IMCRAU004A0IMCRKE020A0IMCRKE018A0IPRP00747A0IFA754207A

    0IMCRFA007A

    0TR102009AB0TR733009AA0TR198009BA0TR198009BA0TR198009BA0TRKE10013A0TR127409AB0TRSA10005A0TR437000BA0TR198009BA0TR319809AA0TR319809AA0TR127009AA0TR127009AA0TR534309AA0TR102009AB0TR534309AA0TR102009AB0TR127409AB0TR319809AA0TR319809AA0TR534309AA0TR421009CA

    0DD414809ED0DSVH00019A0DD414809ED0DD400509AA0DD414809ED0DRSA00211A0DD414809ED0DRTW00164B

    AT24C16A-10PI-2.7 16KBIT 2KX8BIT 2.7VTO5.5VTDA4863A 9.0VTO30.0V - 3.2W - DBS ST 7PKIA4558 36V_+-18V 6mV - - 500MW 30uV/VTDA7297SA 6TO18V 0 0.10% 15W 30W 56DBLTV-817M-VB 6V 35V 35V 50MA 100NASTR-X6556 16.2TO19.4V - - ZIP ST 7PS1117-33PIC 4.8TO12V 3.3V 2W TO220 ST 3PKIA78S06P 8.1TO21V 6V 600MW TO92 ST 3PKIA78R05API 6TO12V 5V 1.5W TO220IS ST 4PTDA6107AJF 180TO210V 6mA - SIP ST 9PKA75420ZTA(KA7542ZTA) 0.3TO15V 4.2VKA431AZ 2.47TO2.52V 36V 770MW TO92 TP

    KRC102M(KRC1202) NPN 30V - 50V 100MAKSA733C-Y PNP -5V -60V -50V -0.15A2SA1980Y PNP -5V -50V -50V -0.15A2SA1980Y PNP -5V -50V -50V -0.15A2SA1980Y PNP -5V -50V -50V -0.15AKTD1047 NPN 6V 160V 140V 12A 100UAKTA1274-Y PNP -5V -80V -80V -0.4A2SC6090LS NPN 5V 1.5KV 700V 10A 10UAKTC4370A-Y NPN 5V 180V 180V 1.5A 1UA2SA1980Y PNP -5V -50V -50V -0.15AKTC3198(KTC1815) NPN 5V 60V 50V 150MAKTC3198(KTC1815) NPN 5V 60V 50V 150MAKTA1270-Y(KTA562TM) PNP -5V -35V -30VKTA1270-Y(KTA562TM) PNP -5V -35V -30V2SC5343Y NPN 5V 60V 50V 150MA 100NAKRC102M(KRC1202) NPN 30V - 50V 100MA2SC5343Y NPN 5V 60V 50V 150MA 100NAKRC102M(KRC1202) NPN 30V - 50V 100MAKTA1274-Y PNP -5V -80V -80V -0.4AKTC3198(KTC1815) NPN 5V 60V 50V 150MAKTC3198(KTC1815) NPN 5V 60V 50V 150MA2SC5343Y NPN 5V 60V 50V 150MA 100NABF421 PNP -5V -0.3KV -0.3KV -0.05A

    1N4148 1V 100V 150MA 500MA 4NSEC 500MWBA282 1V 35V 100MA1N4148 1V 100V 150MA 500MA 4NSEC 500MW1N4005 600V 1.1V 5UA 30A - DO411N4148 1V 100V 150MA 500MA 4NSEC 500MWFMV-205GUR 1.7KV 1.7V 50UA 50A 600NSEC1N4148 1V 100V 150MA 500MA 4NSEC 500MWRGP15J 600V 1.3V 5UA 50A 250NSEC DO15

    IC

    TRANSISTOR

    CAPACITOR

    DIODE

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

  • - 25 -

    LOCA. NO PART NO DESCRIPTION

    C1421C1479C1490C17

    C201C202C203C204C205C206C207C208C209C210C210C212C213C214C215C217C219C224C225C270C271C301C302C303C304C306C307C308C309C310C402C403C404C405C408C411C413C414C415C416C417C419C420C421C422C423C461C463

    181-010H0CF4342U4600CF7041R4600CN1030F6790CE226DF6180CN4710K5190CN1010K5190CN4710K5190CN1010K5190CN1010K5190CN4710K5190CE226DF6180CN4710K5190CN1010K5190CN4710K5190CN1010K5190CN4710K5190CN1010K5190CN4710K5190CN4710K5190CN4710K5190CE226DF6180CE226DF6180CE227DD6180CE227DD6180CQ3931N5090CQ3931N509

    181-091D0CE107DK6180CF1541L4380CN1030F6790CE476DK6180CN4710K5190CQ1031N5090CE475DK6180CK1520W5150CE106DF618

    181-091Y0CE685BK6520CE105BR6180CK2220W5150CK2710W5150CE108DH618

    181-009R0CK2710W5150CE108DH618

    181-009W0CK2710W5150CE475DR6180CE107DJ6180CF4732Y4600CF15312460

    PPN393K2GH 39nF 10% 400V PPPCMP 389 52434 0.43UF 5% 400V MPPPCMP389 42704 0.7uF 5% 250V MPPRH EP050 Y103M-B-B 10nF 20% 16V X5REGR226M016T1G1C11G 22uF 20% 16V 75MARH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PEGR226M016T1G1C11G 22uF 20% 16V 75MARH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050 B471K-B-B 470pF 10% 50V Y5PEGR226M016T1G1C11G 22uF 20% 16V 75MAEGR226M016T1G1C11G 22uF 20% 16V 75MAEGR227M010T1G1E11G 220uF 20% 10V 255MAEGR227M010T1G1E11G 220uF 20% 10V 255MAPEI393K2AT 39nF 10% 100V PE -40TO+85CPEI393K2AT 39nF 10% 100V PE -40TO+85CDEHR33A102KN2A 1nF 10% 1000V Y5REGR107M050T6G1G11G 100uF 20% 50V 270MAPCMT 365 76154 150nF 5% 63V MPERH EP050 Y103M-B-B 10nF 20% 16V X5RSMS5.0TP50VB47M 47uF 20% 50V 181MARH UP050 B471K-B-B 470pF 10% 50V Y5PPEI103K2AT 10nF 10% 100V PE -40TO+85CEGR475M050T1G1C11G 4.7uF 20% 50V 50MADCM152K30Y5PL6FJ5A 1.5nF 10% 500V Y5PSMS5. 0TP16VB10M 10uF 20% 16V 72MALRYM28681KXA 680pF 10% 2000V Y5RKM5.0MC50VBBP-S6.8M 6.8uF 20% 50V 44MAESM105M250T1G5E11G 1uF 20% 250V 15MADCM222K34Y5PL6FJ5A 2.2nF 10% 500V Y5PDCM271K20Y5PL6FJ5A 270pF 10% 500V Y5PSMS5.0TP25VB1000M 1000uF 20% 25V 1.34APPN223K2DH 22nF 10% 200V PPDCM271K20Y5PL6FJ5A 270pF 10% 500V Y5PSMS5.0TP25VB1000M 1000uF 20% 25V 1.34APPN563K2DH 56nF 10% 200V PP -40TO+85CDCM271K20Y5PL6FJ5A 270pF 10% 500V Y5PEGR475M250T1G1G11G 4.7uF 20% 250V 70MASMS5.0TP35VB100M 100uF 20% 35V 291MAPCMP 389 62473 0.047UF 5% 630V MPPPCMP384 92153 0.015uF 5% 2000V MPP

    LOCA. NO PART NO DESCRIPTION

    C501C502C503C504C505C506C509C510C512C513C516C519C520C530C531C532C533C535C536C538C540C542C544C546C547C548C551C553C554C556C557C558C559C561C562C563C564C569C570C571C572C573C574C575C576C577C578C579C580C581C584C585

    0CF2241L4380CE225DK6180CQ6821N5090CE107DD6180CN1040K9490CQ1031N5090CE106DF6180CN1040K9490CN1040K9490CE337DD6180CE226DD618

    181-007F0CN1040K9490CN2220F5690CN2230H9490CF4741L4380CN1040K9490CF4741L4380CN1040K9490CF4741L4380CF4741L4380CN1040K9490CF4741L4380CN1040K9490CF4741L4380CN2220F5690CE226DD6180CN1040K9490CE107DD6180CN1040K9490CN1040K9490CN1040K9490CN1040K9490CQ3931N5090CQ3931N5090CN1010K5190CE106DK6180CN1040K9490CE107DF6180CE336DD6180CN4710K5190CX1000K4090CX1000K4090CX1000K4090CN1040K9490CE106DF6180CN1040K9490CE106DF6180CN1040K9490CE107DD6180CN1040K9490CE225DK618

    PCMT 365 76224 220nF 5% 63V MPEEGR225M050T1G1C11G 2.2uF 20% 50V 20MAPEI682K2AT 6.8nF 10% 100V PE -40TO+85CSMS5.0TP10VB100M 100uF 20% 10V 157MACH UP050 F104Z-B-B Z 100nF -20TO+80%PEI103K2AT 10nF 10% 100V PE -40TO+85CSMS5. 0TP16VB10M 10uF 20% 16V 72MACH UP050 F104Z-B-B Z 100nF -20TO+80%CH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5.0TP10VB330M 330uF 20% 10V 386MAEGR226M010T1G1C11G 22uF 20% 10V 75MAECQ-V1H224JL3(TR) 220nF 5% 50V MPECH UP050 F104Z-B-B Z 100nF -20TO+80%RH EP050 X222K-B-B 2.2nF 10% 16V X7RRH TP050 F223Z-B-B 22nF -20TO+80% 25VPCMT 365 76474 470nF 5% 63V MPECH UP050 F104Z-B-B Z 100nF -20TO+80%PCMT 365 76474 470nF 5% 63V MPECH UP050 F104Z-B-B Z 100nF -20TO+80%PCMT 365 76474 470nF 5% 63V MPEPCMT 365 76474 470nF 5% 63V MPECH UP050 F104Z-B-B Z 100nF -20TO+80%PCMT 365 76474 470nF 5% 63V MPECH UP050 F104Z-B-B Z 100nF -20TO+80%PCMT 365 76474 470nF 5% 63V MPERH EP050 X222K-B-B 2.2nF 10% 16V X7REGR226M010T1G1C11G 22uF 20% 10V 75MACH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5.0TP10VB100M 100uF 20% 10V 157MACH UP050 F104Z-B-B Z 100nF -20TO+80%CH UP050 F104Z-B-B Z 100nF -20TO+80%CH UP050 F104Z-B-B Z 100nF -20TO+80%CH UP050 F104Z-B-B Z 100nF -20TO+80%PEI393K2AT 39nF 10% 100V PE -40TO+85CPEI393K2AT 39nF 10% 100V PE -40TO+85CRH UP050 B101K-B-B 100pF 10% 50V Y5PSMS5.0TP50VB10M 10uF 20% 50V 72MACH UP050 F104Z-B-B Z 100nF -20TO+80%EGR107M016T1G1C11G 100uF 20% 16V 160MAEGR336M010T1G1C11G 33uF 20% 10V 85MARH UP050 B471K-B-B 470pF 10% 50V Y5PRH UP050SL100J-B-B 10pF 5% 50V S2LRH UP050SL100J-B-B 10pF 5% 50V S2LRH UP050SL100J-B-B 10pF 5% 50V S2LCH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5. 0TP16VB10M 10uF 20% 16V 72MACH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5. 0TP16VB10M 10uF 20% 16V 72MACH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5.0TP10VB100M 100uF 20% 10V 157MACH UP050 F104Z-B-B Z 100nF -20TO+80%EGR225M050T1G1C11G 2.2uF 20% 50V 20MA

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

  • - 26 -

    LOCA. NO PART NO DESCRIPTION

    C586C587C590C591C592C594C595C596C597C599C602C603C604C605C607C609C611C807C808C809C811C812C813C814C816C818C820C821C822C823C826C829C830C833C834C835C836C837C838C839C840C841C842C843C844C846C848C849C851C858C861C901

    0CE225DK6180CN1030F6790CE225DK6180CN1040K9490CE107DD6180CQ1031N509

    181-301C0CN1040K9490CE106DF6180CN2230H9490CE477DJ6180CF2241L4380CN6810K5190CN1030F6790CE476DH6180CN6810K5190CF2241L438

    181-091Q0CE477BH6180CE228BF6180CE335CK6360CK471015150CE476DD618

    181-091W0CE227DP61A0CQ2231N509

    181-120N181-091Q

    0CE108DD618181-120N

    0CE108DD6180CE476DD6180CE3386H6100CK102015150CK10201515

    0CQZVBK002A0CK4710W515

    181-001Y0CE227BK6180CE106DH6180CE226DK618

    181-011B0CQ3321N509

    181-007C0CQ1031N5090CE107DD6180CE107CQ6500CE477DD6180CN1020K519

    181-091X181-120N

    0CE475DR618

    EGR225M050T1G1C11G 2.2uF 20% 50V 20MARH EP050 Y103M-B-B 10nF 20% 16V X5REGR225M050T1G1C11G 2.2uF 20% 50V 20MACH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5.0TP10VB100M 100uF 20% 10V 157MAPEI103K2AT 10nF 10% 100V PE -40TO+85CNPP100V154J10F 150nF 5% 100V PPCH UP050 F104Z-B-B Z 100nF -20TO+80%SMS5. 0TP16VB10M 10uF 20% 16V 72MARH TP050 F223Z-B-B 22nF -20TO+80% 25VEGR477M035T1G1H20G 470uF 20% 35V 760MAPCMT 365 76224 220nF 5% 63V MPERH UP050 B681K-B-B 680pF 10% 50V Y5PRH EP050 Y103M-B-B 10nF 20% 16V X5RSMS5.0TP25VB47M 47uF 20% 25V 131MARH UP050 B681K-B-B 680pF 10% 50V Y5PPCMT 365 76224 220nF 5% 63V MPELRYM5471KHA 470pF 10% 1000V Y5RESM477M025T1G5H15G 470uF 20% 25V 510MAESM228M016T1G5K25G 2200uF 20% 16V 970MAERN335M050T1G5C11G 3.3uF 20% 50V 30MADCH471K26Y5PN6FJ5A 470pF 10% 1000V Y5PEGR476M010T1G1C11G 47uF 20% 10V 105MALRYM27471KX1A 470pF 10% 2000V Y5REGR227M160T1G1M32G 220uF 20% 160V 810MAPEI223K2AT 22nF 10% 100V PE -40TO+85CSDE102M09FS1 1nF 20% 4000V Y5ULRYM5471KHA 470pF 10% 1000V Y5RSMS5.0TP10VB1000M 1000uF 20% 10V 854MASDE102M09FS1 1nF 20% 4000V Y5USMS5.0TP10VB1000M 1000uF 20% 10V 854MAEGR476M010T1G1C11G 47uF 20% 10V 105MAEGR338M025K6G1M26G 3300uF 20% 25V 1.85ADCH102K34Y5PN6FJ5A 1nF 10% 1000V Y5PDCH102K34Y5PN6FJ5A 1nF 10% 1000V Y5PPCX2 335 M9729 0.1uF 20% 275V MPPDCM471K20Y5PL6FJ5A 470pF 10% 500V Y5PSMH450VN330M 330uF 20% 450V 1.55AESM227M050T1G5H17G 220uF 20% 50V 400MASMS5.0TP25VB10M 10uF 20% 25V 72MASMS5.0TP50VB22M 22uF 20% 50V 108MAMPPS102J3VD 1nF 5% 1.6KV MPP -40TO+85CPEI332KA2T 3.3nF 10% 100V PE -40TO+85CECQV1H104JZ3 100nF 5% 50V MPEPEI103K2AT 10nF 10% 100V PE -40TO+85CSMS5.0TP10VB100M 100uF 20% 10V 157MASHL5.0MC200VB100M 100uF 20% 200V 601MAEGR477M010T6G1G11G 470uF 20% 10V 425MARH UP050 B102K-B-B 1nF 10% 50V Y5PLRYM27561KXA 560pF 10% 2000V Y5RSDE102M09FS1 1nF 20% 4000V Y5UEGR475M250T1G1G11G 4.7uF 20% 250V 70MA

    LOCA. NO PART NO DESCRIPTION

    C903C904C906C910

    R1201R1202

    J549L102L1102L1407L1408L204L206L207L401L501L503L504L505L506L507L509L511L514L548L801L801T401T402T801T801

    C1C2C3C4C5C6

    JW401JW8AJW8BP101P101P1113P12AP12BP13A

    P1407AP201A

    181-033S0CE475DR6180CN1030F6790CN5610K5190CN1010K5190CN1010K519

    0LA0121K1190LA0102K1390LA0102K1196140VB0034E61409B0003C0LA0102K1190LA0102K1190LA0102K119

    150-717K0LA0121K1190LA0121K1190LA0121K1190LA0121K1190LA0121K1190LA0121K1190LA0102K1190LA0121K1190LA0121K1190LA0121K119

    150-C02E6140VY0024F

    151-C02M6174V-5003W61709MC003B6170VZ0007A

    366-036A366-036B387-916M

    6631V25014D6631V25034E6631V39015B

    387-907B387-907C387-907C366-932B366-932C387-552S366-932B387-A03H366-921G

    6602V39001B366-932E

    DCH122K39Y5PP7VK7A 1.2nF 10% 2000VEGR475M250T1G1G11G 4.7uF 20% 250V 70MARH EP050 Y103M-B-B 10nF 20% 16V X5RRH UP050 B561K-B-B 560pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5PRH UP050 B101K-B-B 100pF 10% 50V Y5P

    Inductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL04TB100K 10UHInductor,Wire Wound,Axial LAL02TB100K 10UHCoil,Choke JS-D018 400uH 19X34MMCoil,Choke JS-D019 130uH 23X38MMInductor,Wire Wound,Axial LAL02TB100K 10UHInductor,Wire Wound,Axial LAL02TB100K 10UHInductor,Wire Wound,Axial LAL02TB100K 10UHCoil,Choke RN-29FA11 1.1uH 50VInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB100K 10UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHInductor,Wire Wound,Axial LAL02TB1R2K 1.2UHCoil,Choke 50uH 50V 0A 12X17MMCoil,Linearity JS-E021 20uH 19X41MMTransformer,Linear EI19 10V 100V 200MH 1ATransformer,FBT BSC29-N2464 125V 29KVTransformer,Switching EER5345 350uH 100uHTransformer,Switching 6170VZ0007A TS4134

    STAPLE STAPLE STAPLE STAPLESWMGS-2 1P NON 1R STRAIGHT DIP TP387-916M BH10009 BH10009 800mMGIL-G-03 35097-9702_35098-9702 900mMTJC25-4Y 35097-9702_35098-9702 500mMGP390-04S-CS 1-1123722-04 150mM 3.96MMMXH8610 BH10009 150mM 1.00MM 1P387-907C MXH8610 BH10009 200mM 3.00MM 1P387-907C MXH8610 BH10009 200mM 3.00MM 1PGIL-G-03P-S3T2-E 3P 2.50MM 1R STRAIGHT DIPGIL-G-04P-S3T2-E 4P 2.50MM 1R STRAIGHT DIPYFH800-02 YFH800-02 400mM 8.00MM 2P UL1617GIL-G-03P-S3T2-E 3P 2.50MM 1R STRAIGHT DIPGIL-G GIL-J 450mM 2.50MM 3 UL1007 AWG26 N 3PGIL-G-08P-S3T2-E 8P 2.50MM 1R STRAIGHT DIPGP390-04P-TS 4P 3.96MM 1R STRAIGHT DIP STGIL-G-06P-S3T2-E 6P 2.50MM 1R STRAIGHT DIP

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

    CONNECTOR

    COIL & INDUCTOR

  • - 27 -

    LOCA. NO PART NO DESCRIPTION

    P201BP22BP401

    P403AP407P601P602

    P902B

    FR403FR404FR405FR901J230J231J574

    L1201L1202L203L208L214L215L216L217L510R101R103R110R1101R111R1110R1111R112R1136R1143R1146R1147R1148R1149R1150R117R119R120R121R15

    R201R202R203R204R205R206

    387-A06J387-A04K366-043K

    6631V25A16G6602V39002B

    366-932B366-932C387-B08G

    0RP0050H7090RP0050H7090RP0050H7090RF0301K6070RD1001F6090RD1001F6090RD1002F6090RD1001F6090RD1001F6090RD1001F6090RD1001F6090RD1001F6090RD1001F6090RD1001F6090RD1001F6090RD0222A6090RD3902F6090RD2202F6090RD1000F6090RD1301F6090RD1000F6090RD1000F6090RKZVTA001K0RD6802F6090RD4701F6090RD6200F6090RD3601F6090RD1501F6090RD1801F6090RD2401F6090RD5601F6090RD1002F6090RD3301F6090RD4701F6090RD2201F6090RD1002F6090RD1000F6090RD0752F6090RD0682F6090RD0752F6090RD0752F6090RD0752F609

    GIL-G-06 GIL-J-06 500mM 2.50MM 6P UL1007GIL-G GIL-J GIL-G GIL-J 600MM 2.50MM 4P35929-0410 4P 10.00MM 1R STRAIGHT DIP BKGIL-J-04 GIL-J-04 400mM 2.50MM 4P UL1007YW396-04V 4P 3.96MM 1R STRAIGHT DIP STGIL-G-03P-S3T2-E 3P 2.50MM 1R STRAIGHT DIPGIL-G-04P-S3T2-E 4P 2.50MM 1R STRAIGHT DIPGIL-G GIL-J 400mM 2.50MM 8P UL1185

    SPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMSPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMSPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMFNS02T3J3R00 3OHM 5% 2W 12.0X4.0MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRDM92T1J22R0 22OHM 5% 1/2W 6.5X2.3MMRD-96T1J39K0 39KOHM 5% 1/6W 3.2X1.8MMRD-96T1J22K0 22KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J1K30 1.3KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRN-92T1J470K 470KOHM 5% 1/2W 9.0X3.0MMRD-96T1J68K0 68KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J620R 620OHM 5% 1/6W 3.2X1.8MMRD-96T1J3K60 3.6KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K50 1.5KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K80 1.8KOHM 5% 1/6W 3.2X1.8MMRD-96T1J2K40 2.4KOHM 5% 1/6W 3.2X1.8MMRD-96T1J5K60 5.6KOHM 5% 1/6W 3.2X1.8MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMRD-96T1J68R0 68OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MM

    LOCA. NO PART NO DESCRIPTION

    R207R209R212R214R215R216R217R220R221R223R225R226R227R228R229R23

    R252R253R301R303R304R306R307R308R309R310R311R314R315R316R317R318R319R319R320R321R322R323R324R324R325R325R326R328R340R341R403R404R407R408R409R410

    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

    RD-96T1J56K0 56KOHM 5% 1/6W 3.2X1.8MMRD-96T1J68R0 68OHM 5% 1/6W 3.2X1.8MMRDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.3MMRD-96T1J56K0 56KOHM 5% 1/6W 3.2X1.8MMRD-96T1J24K0 24KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J1K20 1.2KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J24K0 24KOHM 5% 1/6W 3.2X1.8MMRDM92T1J1R50 1.5OHM 5% 1/2W 6.5X2.3MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J2K70 2.7KOHM 5% 1/6W 3.2X1.8MMRDM92T1J240R 240OHM 5% 1/2W 6.5X2.3MMRDM92T1J5R60 5.6OHM 5% 1/2W 6.5X2.3MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J3K60 3.6KOHM 5% 1/6W 3.2X1.8MMRN-96T1F47K0 47KOHM 1% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRN-01T3J3R00 3OHM 5% 1W 12.0X4.0MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRN-01T3J3R00 3OHM 5% 1W 12.0X4.0MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J24K0 24KOHM 5% 1/6W 3.2X1.8MMRN-96T1F2K00 2KOHM 1% 1/6W 3.2X1.8MMRN-96T1F30K0 30KOHM 1% 1/6W 3.2X1.8MMRN-96T1F39K0 39KOHM 1% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRDM92T1J5R60 5.6OHM 5% 1/2W 6.5X2.3MMRD-96T1J1K50 1.5KOHM 5% 1/6W 3.2X1.8MMRD-96T1J27K0 27KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J470R 470OHM 5% 1/6W 3.2X1.8MMRDM92T1J2K70 2.7KOHM 5% 1/2W 6.5X2.3MMRS-92T1J2K70 2.7KOHM 5% 1/2W 9.0X3.0MMRDM92T1J1K50 1.5KOHM 5% 1/2W 6.5X2.3MMRN-96T1F47K0 47KOHM 1% 1/6W 3.2X1.8MMRD-96T1J300R 300OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRDM92T1J560R 560OHM 5% 1/2W 6.5X2.3MMSPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMRDM92T1J33R0 33OHM 5% 1/2W 6.5X2.3MMRD-96T1J6K80 6.8KOHM 5% 1/6W 3.2X1.8MMRS-92T1J20K0 20KOHM 5% 1/2W 9.0X3.0MMRS-92T1J56K0 56KOHM 5% 1/2W 9.0X3.0MM

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

    RESISTOR

  • - 28 -

    LOCA. NO PART NO DESCRIPTION

    R411R412R415R417R433R435R438R440R448R506R507R509R510R511R512R513R514R515R518R519R521R525R534R535R536R537R538R539R540R543R545R547R548R549R550R551R552R553R554R555R556R557R562R563R566R567R569R572R580R581R582R583

    0RS1001H6090RD7501A6090RD1002F6090RD5103F6090RS1801K6190RS2700K6070RS0221K619

    0RMZVBK002D0RS0221K6190RD1000F6090RD1000F6090RD1000F6090RD1000F6090RD3301F6090RD3301F6090RD1000F6090RD1000F6090RD1000F6090RD1000F6090RD1000F6090RD1000F6090RD0752F6090RD1504F6090RD2402F6090RD1801F6090RD1001F6090RD1803F6090RD1003F6090RD1000F6090RD1000F6090RD0752F6090RD1203F6090RD2200F6090RD2201F6090RD1000F6090RD1000F6090RD1000F6090RD1000F6090RD3900F6090RD6800F6090RN3902F4090RD1202F6090RD1000F6090RD1501A6090RN4701F4090RN4701F4090RD1000F6090RD1000F6090RD4701F6090RD4701F6090RD4702F6090RD4702F609

    RS-92T1J1K00 1KOHM 5% 1/2W 9.0X3.0MMRDM92T1J7K50 7.5KOHM 5% 1/2W 6.5X2.3MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J510K 510KOHM 5% 1/6W 3.2X1.8MMSMR02R1J1K8R 1.8KOHM 5% 2W 8.6X3.5MMRSD02T3J270R 270OHM 5% 2W 12.0X4.0MMSML02R0J2R20 2.2OHM 5% 2W 8.6X3.5MMRSR05V-J15K0 15KOHM 5% 5W 14X9.5X25.5MMSML02R0J2R20 2.2OHM 5% 2W 8.6X3.5MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.8MMRD-96T1J3K30 3.3KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMCR1/8TB1M5J 1.5MOHM 5% 1/8W 3.2X1.8MMRD-96T1J24K0 24KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K80 1.8KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J180K 180KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J75R0 75OHM 5% 1/6W 3.2X1.8MMRD-96T1J120K 120KOHM 5% 1/6W 3.2X1.8MMRD-96T1J220R 220OHM 5% 1/6W 3.2X1.8MMRD-96T1J2K20 2.2KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J390R 390OHM 5% 1/6W 3.2X1.8MMRD-96T1J680R 680OHM 5% 1/6W 3.2X1.8MMRN-96T1F39K0 39KOHM 1% 1/6W 3.2X1.8MMRD-96T1J12K0 12KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRDM92T1J1K50 1.5KOHM 5% 1/2W 6.5X2.3MMRN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.8MMRN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MM

    LOCA. NO PART NO DESCRIPTION

    R584R585R587R591R592R595R606R608R611R612R613R616R617R618R619R801R811R812R813R816R817R819R820R821R822R823R824R825R826R829R830R831R832R834R835R836R837R838R841R842R843R844R845R847R850R851R852R858R859R860R861R901

    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

    RD-96T1J1R00 1OHM 5% 1/6W 3.2X1.8MMRD-96T1J1R00 1OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J680R 680OHM 5% 1/6W 3.2X1.8MMRD-96T1J82K0 82KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J12K0 12KOHM 5% 1/6W 3.2X1.8MMRD-96T1J82K0 82KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J300K 300KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J47K0 47KOHM 5% 1/6W 3.2X1.8MMRD-96T1J300K 300KOHM 5% 1/6W 3.2X1.8MMRN-96T1F27K0 27KOHM 1% 1/6W 3.2X1.8MMRD-96T1J10K0 10KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMSPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMRD-96T1J100R 100OHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMSPF01T1MR020 0.02OHM 20% 1W 6.5X2.3MMSPF01T1MR020 0.02OHM 20% 1W 6.5X2.3MMRD-96T1J2K70 2.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J47R0 47OHM 5% 1/6W 3.2X1.8MMSPF92T1KR050 0.05OHM 10% 1/2W 3.2X2.0MMRN-96T1F180K 180KOHM 1% 1/6W 3.2X1.8MMRN-96T1F56K0 56KOHM 1% 1/6W 3.2X1.8MMRD-96T1J39K0 39KOHM 5% 1/6W 3.2X1.8MMRN-96T1F4K70 4.7KOHM 1% 1/6W 3.2X1.8MMRN-92T1J8M20 8.2MOHM 5% 1/2W 9.0X3.0MMRD-96T1J1K00 1KOHM 5% 1/6W 3.2X1.8MMRD-96T1J5K60 5.6KOHM 5% 1/6W 3.2X1.8MMRDM92T1J220R 220OHM 5% 1/2W 6.5X2.3MMFNS02T3J2R00 2OHM 5% 2W 12.0X4.0MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J220K 220KOHM 5% 1/6W 3.2X1.8MMRD-96T1J6K80 6.8KOHM 5% 1/6W 3.2X1.8MMRD-96T1J4R70 4.7OHM 5% 1/6W 3.2X1.8MMRD-96T1J390R 390OHM 5% 1/6W 3.2X1.8MMRD-96T1J4K70 4.7KOHM 5% 1/6W 3.2X1.8MMRD-96T1J82K0 82KOHM 5% 1/6W 3.2X1.8MMRD-96T1J100K 100KOHM 5% 1/6W 3.2X1.8MMRN-92T1J470K 470KOHM 5% 1/2W 9.0X3.0MMRDM92T1J10K0 10KOHM 5% 1/2W 6.5X2.3MMFNS02T3J2R00 2OHM 5% 2W 12.0X4.0MMRD-96T1J3K90 3.9KOHM 5% 1/6W 3.2X1.8MMRD-96T1J220R 220OHM 5% 1/6W 3.2X1.8MM

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

  • R902R903R906R907R908R909R910R911R912R920R925

    SW1101SW1102SW1103SW1104SW1105SW1106SW1111

    SG201SG901SG902SG903SG904SG911SG912SG913

    FB401FB802FB803FB833FB844FB845FB846T1111T803X01Z101Z102

    JK1203JK201JK202

    F1111

    LD1101PA1101R855

    SK901SW

    TH301TH801TU101VD1111

    A1A1A1A1A1A1A2

    - 29 -

    LOCA. NO PART NO DESCRIPTION

    0RD2200F6090RD2200F6090RD1201A6090RD1201A6090RD1201A6090RS2201H6090RS2201H6090RS2201H6090RD2204A6090RD4703A6090RD2200F609

    140-315A140-315A140-315A140-315A140-315A140-315A

    6600VM2002A

    6918VAX002E165-004A165-004A165-004A

    6918VAX002H6918VAX002E6918VAX002E6918VAX002E

    125-022K125-022K125-022K125-022K125-022K125-022K125-022K

    6200JB8012T150-F06T156-A01Z166-A01B

    6200QL3003G

    6613V00004Q6612M00005A6613V00025A

    0FS5001B51D

    RD-96T1J220R 220OHM 5% 1/6W 3.2X1.8MMRD-96T1J220R 220OHM 5% 1/6W 3.2X1.8MMRDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.3MMRDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.3MMRDM92T1J1K20 1.2KOHM 5% 1/2W 6.5X2.3MMRSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.3MMRSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.3MMRSD92T1J2K20 2.2KOHM 5% 1/2W 6.5X2.3MMRDM92T1J2M20 2.2MOHM 5% 1/2W 6.5X2.3MMRDM92T1J470K 470KOHM 5% 1/2W 6.5X2.3MMRD-96T1J220R 220OHM 5% 1/6W 3.2X1.8MM

    THVH472GBC 1C1P 12VDC 0.05A VERTICALTHVH472GBC 1C1P 12VDC 0.05A VERTICALTHVH472GBC 1C1P 12VDC 0.05A VERTICALTHVH472GBC 1C1P 12VDC 0.05A VERTICALTHVH472GBC 1C1P 12VDC 0.05A VERTICALTHVH472GBC 1C1P 12VDC 0.05A VERTICALSDKEA3012A AC 250VAC 8A 1PCS 2C1P

    WSP-351M AXIAL 350V 350V - 7.5MM TP152F-L3N/S-23 RADIAL 1.5KV 1.5KV - 5MM BK152F-L3N/S-23 RADIAL 1.5KV 1.5KV - 5MM BK152F-L3N/S-23 RADIAL 1.5KV 1.5KV - 5MM BKWSP-122N AXIAL 1.2KV 1.2KV - - TPWSP-351M AXIAL 350V 350V - 7.5MM TPWSP-351M AXIAL 350V 350V - 7.5MM TPWSP-351M AXIAL 350V 350V - 7.5MM TP

    125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP125-022K 20OHM 3.5X6MM AXIAL TP6200JB8012T 10MH 31X31X25MM SQE2828S150-F06T 20MH 38X26X43MM SQE3535HC-49/U 24.576MHZ 50PPM 24.576MHZ 50PPMK3953M 33.90MHZ 38.90MHZ 17X3.9X8.7MMK9650M(B39389-K9650-M100) 33.90_38.90MHZ

    PJ6054Q 14.0MM 3RX1C ANGLE TRUPJ-R1-027 21P 21P/1C 3.81MM ANGLEPSC002-01 24P SCART/RCA 14MM

    Fuse,Time Delay, 0218 005. GLASS 250V 5A

    LOCA. NO PART NO DESCRIPTION

    LED,DIP SA5711-B DL-1LO(S)Receiver Module, TSOP2438 4.5TO5.5V 1.5MAThermistor,NTC TP8D15LKBESMNR 8OHMSocket,CRT PCS030A 8P STRAIGHT 15.24MMS/W,Firmware 3.14 407CThermistor,NTC KC5B130L 300OHM 15% 2.671VThermistor,PTC J503P83D070M290X 14OHM 20%Tuner,Analog TAEA-G011D PAL-B/G+I+M+D/KVaristor, TVR14621 620V 10% 250pF 14MM

    Manual, HU/BU/EN 124U/V/W/X TX 051AManual, 124U/V/W/X TX 017BManual, RO 124U/V/W/X TXManual, CZ/SK 124U/V/W/X TXManual, BALTIC ES/LV/LT 124V-TXManual, USER UKR/BZ03 RU/EN 112 TXRemote Controller, W/O PIP W/ TXT

    For Capacitor & Resistors,the characters at 2nd and 3rddigit in the P/No. means asfollows;

    CC, CX, CK, CN : CeramicCQ : PolyesterCE : Electrolytic

    RD : Carbon FilmRS : Metal Oxide FilmRN : Metal FilmRF : Fusible

    0DD000000BA6712R1538GH6322TA080AB6620VBC003ASAA300422026322A90004A

    163-058D6700MF0018A

    164-003G

    38289U0479L38289U0479M38289U0479N38289U0479Q38289U0479V38289U0579L6710V00124V

    FILTER & CRYSTAL

    ACCESSORIES

    MISCELLANEOUS

    JACK

    SPARK GAP, AXIAL

    SWITCH

  • P/No : 38549D0024A2006.01.20

  • SVC. SHEET : 38549D0024A-S

  • Jun, 2006Printed in KoreaP/NO : MFL30504604

    #EV#