Upload
selvithimmarajangmailcom
View
284
Download
0
Embed Size (px)
Citation preview
8/13/2019 Loesungen Schiffbau En
1/71
Solutions for ship construction
8/13/2019 Loesungen Schiffbau En
2/71
Quality meets flexibility
and experience. OBO solutions for
ship construction
Think connected
OBO stands for networked thinking- all over the world our systems pro-
vide a reliable backbone for building
and system technology for indus-
try, commerce and infrastructure
systems.
There are branches of industry, in which the safety of the manufactured goods
is paramount. These surely include ship construction. On the high seas, each
component used must function perfectly and reliably even if there is an
emergency. OBO has the right systems for the special requirements of
electrical systems on ships.
2
8/13/2019 Loesungen Schiffbau En
3/71
Comprehensive solutions from the
bow to the stern, from the keel to
the deck.
They are almost never seen, but
provide a good safe feeling on the
high seas: OBO ship systems
create passive safety,
function reliably if there is a fault,
ensure a reliable power supply and
error-free data transmission and
fulfi l all the requirements of
modern fi re protection.
Our selection for your project:
This solutions catalogue contains a
selection of our products for ship
construction. You can fi nd over
30,000 additional products for all
areas of electrical installations in our
seven main catalogues or on the
Internet.
Mounting systems
Cable tray systems
Cable ladder systems
Connection, fastening and
cable routing systems
Lightning and surge protection
Directories
Contents
8/13/2019 Loesungen Schiffbau En
4/714
Specific requirements, specific solutions
With regard to ship construction,
experience has shown us that each
project is individual and will have
its own requirements for technical
equipment.
The OBO consultants and devel-
opers know exactly what is required
and include important require-
ments into the product design from
the very start.
A perfectly equipped testing centre
is ready for this, in which not only
our standard products are tested,
but also project-specifi c special
solutions as well.
8/13/2019 Loesungen Schiffbau En
5/71
Our motto: Always do it better
We want to be the best. Therefore,
we always take a critical look at our
services and products without
any compromises.
5
We like short routes in any phase
of a project. This is why, at OBO,
everything comes from one source.
This ranges from personal on-site
consultancy, through planning and
highly modern, fl exible production,
right up to quality assurance and
logistics. With comprehensive in-
house storage capacities and an
extremely high availability at specialist
wholesalers, OBO products are
always available quickly and anywhere
in the world. And OBO Customer
Services is available to offer help
and advice for special requirements.
8/13/2019 Loesungen Schiffbau En
6/71
Cable tray systems and mesh cable tray systems
OBO cable trays for ship construc-
tion are perforated according to
marine standards, ensuring safe
cable routing in any mounting situ-
ation. Special surfaces ensure per-
fect corrosion protection, even when
used outdoors or in aggressive
atmospheres.
6
8/13/2019 Loesungen Schiffbau En
7/717
8/13/2019 Loesungen Schiffbau En
8/71
Cable ladder systems
OBO cable ladders with rung spac-
ings of 250 and 300 mm and the
fastening materials designed for the
purpose allow perfect solutions for
any task. Here, too, special surfaces
provide increased resistance.
8
8/13/2019 Loesungen Schiffbau En
9/719
8/13/2019 Loesungen Schiffbau En
10/71
10 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
8/13/2019 Loesungen Schiffbau En
11/71
11OBOLSB
g
g
_
(
p
_
)
Mountin
gsystems
Angle profile
12
Construction and suspension profile
12
Welding angle
12
Fastening screws
13
Mounting systems
8/13/2019 Loesungen Schiffbau En
12/71
12 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Mountin
gsystems
Angle profile
ST Steel FT Hot-dip galvanised /m
Angle profile with double perforation row to create suspension and support constructions.
WESP 50 40 FT
Type
mm
Length
3000
7105 67 3
Item No.
246.340
kg/100 m
Weight
1
m
Pack.
ST Steel SG Pre-treated for welding /m
Angle profile with double perforation row to create suspension and support constructions.
WESP 50 40 SG
Type
mm
Length
3000
7105 67 5
Item No.
239.340
kg/100 m
Weight
1
m
Pack.
Construction and suspension profile
ST Steel FT Hot-dip galvanised /m
The rail profile is available in unpainted steel and in stainless steel on request.
Perforated rail profile of ship ladder, SL 42, for creation of suspension and support structures.
SLH 42 FT
Type
mm
Length
2000
Version
Perforated
7103 61 1
Item No.
51.500
kg/100 m
Weight
1
m
Pack.
ST Steel FT Hot-dip galvanised /m
The rail profile is available in unpainted steel and in stainless steel on request.
Perforated side rail of ship cable ladder, SL 62, for creation of suspension and support structur-
es.
SLH 62 FT
Type
mm
Length
3000
Version
Perforated
7103 64 3
Item No.
136.000
kg/100 m
Weight
1
m
Pack.
ST Steel FT Hot-dip galvanised /m
Flat iron profile with double, side-offset slot row to create suspended and support constructions.
FESP 40 5 FT
Type
mm
Length
3000
7104 35 6
Item No.
0.000
kg/100 m
Weight
1
m
Pack.
ST Steel SG Pre-treated for welding /m
Flat iron profile with double, side-offset slot row to create suspended and support constructions.
FESP 40 5 SG
Type
mm
Length
3000
7104 35 8
Item No.
0.000
kg/100 m
Weight
1
m
Pack.
Welding angle
ST Steel
FT Hot-dip galvanised /pc.
Connection bracket formounting ship's cable ladders andmarine tracks, for welding to steel
constructions in ship construction.
ASW FT
Type
mm
Dimen-sion
25 x 50
6015 35 0
Item No.
5.700
kg/100 pcs.
Weight
10
pcs
Pack.
ST Steel Bright /pc.
Connection bracket formounting ship's cable ladders andmarine tracks, for welding to steel
constructions in ship construction.
ASW BK
Type
mm
Dimen-sion
25 x 50
6015 35 2
Item No.
5.300
kg/100 pcs.
Weight
10
pcs
Pack.
Mounting systems
8/13/2019 Loesungen Schiffbau En
13/71
13OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Mountin
gsystems
Truss-head bolt
ST Steel F Hot-dip galvanised /100 pc.
Truss-head bolt with square neck including nut-and-washer assembly.
FRSB 6X12 F
Type
Grade
5.6
mm
Dimen-sion
M6 x 12
mm
Dimen-sion L
12
mm
Dimen-sion d
6
mm
Dimen-sion D
13.5
6406 12 2
Item No.
0.990
kg/100 pcs.
Weight
100
pcs
Pack.
FRSB 6X15 F 5.6 M6 x 15 15 6 13.5 6406 15 70.800100
FRSB 6X20 F 5.6 M6 x 20 20 6 13.5 6406 20 31.000100
ST Steel F Hot-dip galvanised /100 pc.
The truss-head bolt can be used in combination with hot-dip and double-dipgalvanised articles.
Truss-head bolt with square neck. With washer and hexagonal nut.
FRS 8X20 F
Type
Grade
5.6
mm
Dimen-sion
M8 x 20
mm
Dimen-sion L
20
mm
Dimen-sion d
8
mm
Dimen-sion D
20
6406 97 1
Item No.
2.100
kg/100 pcs.
Weight
50
pcs
Pack.
FRS 8X25 F 8.8 M8 x 25 25 8 20 6406 99 82.30050
FRS 8X35 F 5.6 M8 x 35 35 8 20 6407 04 82.70050
FRS 10X30 F 8.8 M10 x 30 30 10 24 6407 57 94.40050
Truss-head bolt
V2A Stainless steel, 1.4301 V4A Stainless steel 1.4401 /100 pc.
Truss-head bolt with square neck including washer and hexagonal nut.
FRSB 6X12 VA4301
Type
mm
Dimen-sion
M6 x 12
mm
Dimen-sion L
12
mm
Dimen-sion d
6
mm
Dimen-sion D
13.5
6406 52 1
Item No.
0.760
kg/100 pcs.
Weight
100
pcs
Pack.
FRSB 6X16 VA4301 M6 x 16 15 6 13.5 6406 55 60.900100
FRSB 6X20 VA4301 M6 x 20 20 6 13.5 6406 60 21.000100
FRS 8X20 VA4301 M8 x 20 20 8 20 6406 80 72.10050
FRS 10X30 VA4301 M10 x 30 30 10 24 6406 72 64.50050
FRSB 6X12 VA4401
M6 x 12
12
6
16
6406 14 2
0.796
100
FRSB 6X16 VA4401 M6 x 16 16 6 16 6406 19 30.800100
FRS 6X20 VA4401 M6 x 20 20 6 16 6406 61 01.000100
FRS 10X20 VA4401 M10 x 20 20 10 24 6406 87 04.00050
Truss-head bolt, with combination nut
V2A Stainless steel, 1.4301 /100 pc.
Truss-head bolt with square neck including nut-and-washer assembly.
FRSB 6X12 VA4301
Type
Grade
1.4301
mm
Dimen-sion
M6 x 12
mm
Dimen-sion L
12
mm
Dimen-sion d
6
mm
Dimen-sion D
16
6406 13 8
Item No.
0.830
kg/100 pcs.
Weight
100
pcs
Pack.
FRSB 6X16 VA4301 1.4301 M6 x 16 16 6 16 6406 18 90.800100
V4A Stainless steel 1.4401 /100 pc.
Truss-head bolt with square neck including combination nut.
FRSB 6X12 VA4401
Type
mm
Dimen-sion
M6 x 12
mm
Dimen-sion L
12
mm
Dimen-sion d
6
mm
Dimen-sion D
16
6406 14 2
Item No.
0.796
kg/100 pcs.
Weight
100
pcs
Pack.
FRSB 6X16 VA4401 M6 x 16 16 6 16 6406 19 30.800100
Hexagonal bolt
ST Steel F Hot-dip galvanised /100 pc.
Hexagonal bolt for universal fixing of structure components.
SKS 6X12 F
Type
mm
Dimen-sion
M6 x 10
mm
Dimen-sion L
12
mm
Dimen-sion d
6
mm
SW
10
3156 49 4
Item No.
0.810
kg/100 pcs.
Weight
100
pcs
Pack.
SKS 6X20 F M6 x 20 20 6 10 3156 51 60.900100
SKS 6X30 F M6 x 30 30 6 10 3156 52 41.100100
SKS 8X16 F M8 x 16 16 8 13 3158 62 41.19050
SKS 8X20 F M8 x 20 20 8 13 3158 63 21.27050
Hook screw
V4A Stainless steel, 1.4571 /100 pc.
Hook screw for fastening cable tracks on the bracket.
HS M6 45 VA4571
Type
1154 97 0
Item No.
0.970
kg/100 pcs.
Weight
1
pcs
Pack.
Mounting systems
8/13/2019 Loesungen Schiffbau En
14/71
14 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Mountin
gsystems
Hook screw
V4A Stainless steel, 1.4571 /pc.
Hook screw for fastening cable tracks on the bracket.
HS M8 60 VA4571
Type
Thread
M8
1154 97 5
Item No.
2.330
kg/100 pcs.
Weight
1
pcs
Pack.
Mounting systems
8/13/2019 Loesungen Schiffbau En
15/71
12
LSBLsung
skatalog
Schiffsbau_International/en
/07/04/2010
(LLEx
port_01016)
15OBOLSB
8/13/2019 Loesungen Schiffbau En
16/71
16 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
8/13/2019 Loesungen Schiffbau En
17/71
17OBOLSB
g
g
_
(
p
_
)
Cabletraysystems
Cable tray systems Cable tray, marine standard 18Screw connector 19
Bend 90 19
Cable tray MKS 20Straight connector 20
Cable tray SKS 20Straight and angle connector 21
Cable tray systems
8/13/2019 Loesungen Schiffbau En
18/71
18 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Cabletraysystems
Cable tray, marine standard
ST Steel FS Strip-galvanised /m
The cable track ismanufactured according to the VG standard 88900. The side rail of the cable
track is unperforated.
Perforatedmetal cable tray according tomarine standard. Cable tray with 7 x 20mm base per-
foration for cable ventilation and simplifiedmounting.
MKR 15 050 FS
Type
mm
Width
50
mm
Length
3000
mm
Platethickness
1
6045 95 2
Item No.
49.000
kg/100 m
Weight
MKR 15 075 FS 75 3000 1 6045 96 064.000
MKR 15 100 FS 100 3000 1 6045 97 976.000
MKR 15 150 FS 150 3000 1 6045 99 5104.000
MKR 15 200 FS200
3000
1 6046 00 2131.000
MKR 15 300 FS 300 3000 1.5 6046 02 9275.000
Cable tray, marine standard
ST Steel FT Hot-dip galvanised /m
The cable track ismanufactured according to the VG standard 88900. The side rail of the cable
track is unperforated.
Perforatedmetal cable tray according tomarine standard. Cable tray with 7 x 20mm base per-
foration for cable ventilation and simplifiedmounting.
MKR 15 050 FT
Type
mm
Width
50
mm
Length
2000
mm
Platethickness
1.25
6045 05 7
Item No.
65.500
kg/100 m
Weight
MKR 15 075 FT 75 2000 1.25 6045 07 384.700
MKR 15 100 FT 100 2000 1.25 6045 10 3104.000
MKR 15 125 FT125
2000
1.25 6045 13 8125.500
MKR 15 150 FT 150 2000 1.5 6045 15 4162.500
MKR 15 200 FT 200 2000 1.5 6045 20 0205.500
MKR 15 250 FT 250 2000 1.5 6045 25 1253.000
MKR 15 300 FT 300 2000 1.5 6045 30 8292.700
Cable tray, marine standard
Al Aluminium /m
The cable track ismanufactured according to the VG standard 88900. The side rail of the cable
track is unperforated.
Perforatedmetal cable tray according tomarine standard. Cable tray with 7 x 20mm base per-
foration for cable ventilation and simplifiedmounting.
MKR 15 050 ALU
Type
mm
Width
50
mm
Length
2000
mm
Platethickness
1.25
6045 70 7
Item No.
25.500
kg/100 m
Weight
MKR 15 075 ALU 75 2000 1.25 6045 71 533.000
MKR 15 100 ALU 100 2000 1.25 6045 72 339.500
MKR 15 150 ALU 150 2000 1.5 6045 75 870.500
MKR 15 200 ALU 200 2000 1.5 6045 76 689.500
MKR 15 250 ALU 250 2000 1.5 6045 77 4108.000
Cable tray, marine standard
V2A Stainless steel, 1.4301 Bright /m
The cable track ismanufactured according to the VG standard 88900. The side rail of the cable
track is unperforated.
Perforatedmetal cable tray according tomarine standard. Cable tray with 7 x 20mm base per-
foration for cable ventilation and simplifiedmounting.
MKR 15 050VA4301
Type
mm
Width
50
mm
Platethickness
1.25
mm
Length
3000
6045 83 0
Item No.
61.300
kg/100 m
Weight
MKR 15 075VA4301 75 1.25 3000 6045 83 280.000
MKR 15 100VA4301 100 1.25 3000 6045 83 495.000
MKR 15 125VA4301 125 1.25 3000 6045 83 6113.800
MKR 15 150VA4301 150 1.5 3000 6045 83 8156.000
MKR 15 200VA4301 200 1.5 3000 6045 84 0196.500
MKR 15 250VA4301 250 1.5 3000 6045 84 2237.000
MKR 15 300VA4301 300 1.5 3000 6045 84 4275.000
Cable tray systems
8/13/2019 Loesungen Schiffbau En
19/71
19OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Cabletraysystems
Cable tray, marine standard
V4A Stainless steel, 1.4571 Bright /m
The cable track ismanufactured according to the VG standard 88900. The side rail of the cable
track is unperforated.
Perforatedmetal cable tray according tomarine standard. Cable tray with 7 x 20mm base per-
foration for cable ventilation and simplifiedmounting.
MKR 15 050VA4571
Type
mm
Width
50
mm
Platethickness
1.25
mm
Length
3000
6045 85 0
Item No.
61.300
kg/100 m
Weight
MKR 15 075VA4571 75 1.25 3000 6045 85 280.000
MKR 15 100VA4571 100 1.25 3000 6045 85 495.000
MKR 15 125VA4571 125 1.25 3000 6045 85 6113.800
MKR 15 150VA4571150
1.5
3000 6045 85 8156.000
MKR 15 200VA4571 200 1.5 3000 6045 86 0196.500
MKR 15 250VA4571 250 1.5 3000 6045 86 2237.000
MKR 15 300VA4571 300 1.5 3000 6045 86 4275.000
Bend 90
ST Steel FS Strip-galvanised /pc.
90bend, horizontal, for all ship construction cable tray types according to the marine standard
of 15mm side height.
RB 90 75 050 FS
Type
mm
Width
51
7061 14 6
Item No.
14.600
kg/100 pcs.
Weight
1
pcs
Pack.
RB 90 75 075 FS
76 7061 05 021.3001 RB 90 75 100 FS 101 7061 24 428.4001
RB 90 75 125 FS 126 7061 25 256.5001
RB 90 75 150 FS 151 7061 36 073.3001
RB 90 75 200 FS 201 7061 44 9102.4001
RB 90 75 250 FS 252 7061 54 6163.8001
RB 90 75 300 FS 302 7061 64 3206.0001
ST Steel FT Hot-dip galvanised /pc.
90bend, horizontal, for ship construction cable trays according to the marine standard of
15mm side height.
RB 90 75 050 FT
Type
mm
Width
51
7061 14 5
Item No.
16.000
kg/100 pcs.
Weight
1
pcs
Pack.
RB 90 75 075 FT 76 7061 04 823.3001
RB 90 75 100 FT 101 7061 24 231.1001
RB 90 75 200 FT 201 7061 44 7110.6001
RB 90 75 250 FT252 7061 54 4176.9001
RB 90 75 300 FT 302 7061 64 1222.5001
Screw connector
ST Steel FS Strip-galvanised /pc.
SV MKR FS
Type
mm
Dimen-sion
16 x 29 x 60
6066 24 2
Item No.
4.900
kg/100 pcs.
Weight
1
pcs
Pack.
ST Steel FT Hot-dip galvanised /pc.
Straight connector for straight connection of cable trays, according to the marine standard, and
fittings with a side height of 15mm.
SV MKR FT
Type
mm
Dimen-
sion
16 x 29 x 60
6066 24 0
Item No.
5.000
kg/100 pcs.
Weight
50
pcs
Pack.
Cable tray systems
8/13/2019 Loesungen Schiffbau En
20/71
20 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Cabletraysystems
Cable tray MKS
ST Steel FS Strip-galvanised /m
MKS 60 = Medium-duty cable tray system with a side height of 60mm. FS version includes RV
60 straight connector set.
MKS 605 FS
Type
mm
Width
50
mm
Platethickness
1
mm
Length
3000
cm
Usefulcross-
section
28
6055 05 2
Item No.
143.200
kg/100 m
Weight
MKS 610 FS 100 1 3000 58 6055 10 9173.000
MKS 615 FS 150 1 3000 88 6055 14 1227.600
MKS 620 FS 200 1 3000 118 6055 20 6238.600
MKS 630 FS300
13000
178 6055 30 3304.600
MKS 640 FS 400 1 3000 238 6055 40 0368.000
MKS 650 FS 500 1 3000 298 6055 50 8433.500
MKS 660 FS 600 1 3000 358 6055 52 4498.000
Cable tray MKS
ST Steel FT Hot-dip galvanised /m
MKS 60 = Medium-duty cable tray system in 60mm Side height. FS version includes RV 60
straight connector set.
MKS 605 FT
Type
mm
Width
50
mm
Platethickness
1
mm
Length
3000
cm
Usefulcross-
section
28
6055 51 6
Item No.
133.000
kg/100 m
Weight
MKS 610 FT 100 1 3000 58 6055 53 2188.000
MKS 615 FT 150 1 3000 88 6055 55 9215.600
MKS 620 FT 200 1 3000 118 6055 57 5261.000
MKS 630 FT300
13000
178 6055 61 3331.000
MKS 640 FT 400 1 3000 238 6055 66 4402.000
MKS 650 FT 500 1 3000 298 6055 69 9510.000
MKS 660 FT 600 1 3000 358 6055 71 0527.600
7 x 18
56
100
7 x 18
56
100
Straight connector
ST Steel
FS Strip-galvanised FT Hot-dip galvanised /pc.
Including appropriate fasteningmaterial.
Straight connector for straight connection of cable trays, fittings and barrier strips with a side
height of 60mm.
RLVK 60 FS
Type
mm
Sideheight
60
6067 09 3
Item No.
9.200
kg/100 pcs.
Weight
10
pcs
Pack.
RLVK 60 FT
60
6067 60 3
10.700
10
Cable tray SKS
ST Steel FS Strip-galvanised /m
FS version includes connector, type RLVL 85.
SKS 85 = Heavy-duty cable tray system with 85mm side height.
SKS 810 FS
Type
mm
Width
100
mm
Platethickness
1.5
mm
Length
3000
cm
Usefulcross-
section
83
6058 10 8
Item No.
311.800
kg/100 m
Weight
SKS 820 FS 200 1.5 3000 186 6058 20 5410.000
SKS 830 FS 300 1.5 3000 253 6058 30 2508.100
SKS 840 FS 400 1.5 3000 338 6058 39 6605.300
SKS 850 FS 500 1.5 3000 423 6058 50 7704.700
SKS 860 FS 600 1.5 3000 508 6058 60 4802.700
Cable tray SKS
ST Steel FT Hot-dip galvanised /m
SKS 85 = Heavy-duty cable tray system with 85mm side height.
SKS 810 FT
Type
mm
Width
100
mm
Platethickness
1.5
mm
Length
3000
cm
Usefulcross-
section
83
6058 62 0
Item No.
330.500
kg/100 m
Weight
SKS 820 FT 200 1.5 3000 186 6058 64 7434.600
SKS 830 FT 300 1.5 3000 253 6058 66 3538.500
SKS 840 FT 400 1.5 3000 338 6058 69 8641.600
SKS 850 FT 500 1.5 3000 423 6058 72 8746.800
SKS 860 FT 600 1.5 3000 508 6058 74 4850.800
Cable tray systems
8/13/2019 Loesungen Schiffbau En
21/71
21OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Cabletraysystems
Straight and angle connector
ST Steel FS Strip-galvanised FT Hot-dip galvanised /pc.
Including appropriate fasteningmaterial.
Straight and angle connector for cable trays, fittings and barrier strips with a side height of85mm.
RLVL 85 FS
Type
mm
Sideheight
85
6067 12 3
Item No.
26.500
kg/100 pcs.
Weight
10
pcs
Pack.
RLVL 85 FT
85
6067 81 6
23.500
10
Cable tray systems
8/13/2019 Loesungen Schiffbau En
22/71
22 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
8/13/2019 Loesungen Schiffbau En
23/71
23OBOLSB
g
g
_
(
p
_
)
Cableladdersystems
Cable ladder systems Cable ladder, light duty 24
Cable ladder, standard 24
Cable ladder with Z rung, light duty 26
Cable ladder with Z rung, standard 27
Tightening strap 27
Spring chuck 28
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
24/71
24 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Cableladdersystems
Cable ladder, light duty
ST Steel FT Hot-dip galvanised /m
The shipping cable ladder is also available in aluminium and stainless steel on request. Bends
are also available on request.
Shipping cable ladder with perforated side rail of side height 25mm with welded, perforated
trapezoidal rungs which open in a downwards direction.
SL 42 075 FT
Type
mm
Width
75
mm
Length
2000
mm
Railthickness
3
7097 11 5
Item No.
114.000
kg/100 m
Weight
SL 42 100 FT 100 2000 3 7097 12 3118.000
SL 42 150 FT 150 2000 3 7097 13 1126.000
SL 42 200 FT 200 2000 3 7097 15 8135.000
SL 42 250 FT250
2000
3 7097 16 6138.000
SL 42 300 FT 300 2000 3 7097 17 4148.000
Cable ladder, light duty
ST Steel SG Pre-treated for welding /m
The shipping cable ladder is also available in aluminium and stainless steel on request. Bends
are also available on request.
Shipping cable ladder with perforated side rail of side height 25mm with welded, perforated
trapezoidal rungs which open in a downwards direction.
SL 42/075
Type
mm
Width
75
mm
Length
2000
mm
Railthickness
3
7097 02 6
Item No.
112.000
kg/100 m
Weight
SL 42/100 100 2000 3 7097 03 4115.000
SL 42/150 150 2000 3 7097 04 2125.000
SL 42/200200
2000
3 7097 05 0132.000
SL 42/250 250 2000 3 7097 06 9136.000
SL 42/300 300 2000 3 7097 07 7145.000
Cable ladder, standard
ST Steel FT Hot-dip galvanised /m
The shipping cable ladder is also available in aluminium and stainless steel on request. Bends
are also available on request.
Shipping cable ladder with perforated side rail of side height 40mm with welded, perforated
trapezoidal rungs which open in a downwards direction.
SL 62 110 FT
Type
mm
Width
110
mm
Length
3000
7097 40 9
Item No.
298.300
kg/100 m
Weight
SL 62 210 FT 210 3000 7097 42 5330.200
SL 62 310 FT
310
3000 7097 43 3361.800 SL 62 410 FT 410 3000 7097 44 1393.700
SL 62 510 FT 510 3000 7097 46 8425.600
SL 62 610 FT 610 3000 7097 47 6457.200
Cable ladder, standard
ST Steel SG Pre-treated for welding /m
The shipping cable ladder is also available in aluminium on request. Bends are also available on
request.
Shipping cable ladder with perforated side rail of side height 40mm with welded, perforated
trapezoidal rungs which open in a downwards direction.
SL 62/110
Type
mm
Width
110
mm
Length
3000
7097 21 2
Item No.
292.600
kg/100 m
Weight
SL 62/210 210 3000 7097 23 9323.900
SL 62/310310
3000 7097 24 7354.800
SL 62/410 410 3000 7097 25 5386.100
SL 62/510 510 3000 7097 26 3417.400
SL 62/610 610 3000 7097 27 1448.400
Rung, standard
ST Steel SG Pre-treated for welding FT Hot-dip galvanised /m
Light-duty rung with 7 x 32mm perforation. For welding in cable ladders, type SL 62, and for
static constructions.
SLSP 62 300 FT
Type
mm
Length
3000
7102 77 1
Item No.
104.800
kg/100 m
Weight
1
m
Pack.
SLSP 62 300 SG
3000
7102 67 4
98.900
1
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
25/71
25OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Cableladdersystems
Rung, standard
V2A Stainless steel, 1.4301 Bright /m
Light-duty rung with 7 x 32mm perforation. For welding in cable ladders, type SL 62, and for
static constructions.
SLSP 62 300 V2A
Type
mm
Length
3000
7102 56 2
Item No.
98.900
kg/100 m
Weight
1
m
Pack.
V4A Stainless steel, 1.4571 Bright /m
Light-duty rung with 7 x 32mm perforation. For welding in cable ladders, type SL 62, and for
static constructions.
SLSP 62 300 V4A
Type
mm
Length
3000
7102 58 2
Item No.
98.900
kg/100 m
Weight
1
m
Pack.
Cable ladder clamp
ST Steel
FT Hot-dip galvanised /pc.
Cable ladder bracket to fasten the cable ladder SL 42.
KL 42 FT
Type
mm
Width
25
7103 36 0
Item No.
3.100
kg/100 pcs.
Weight
50
pcs
Pack.
Cable ladder clamp
V4A Stainless steel, 1.4571 Bright /pc.
Cable ladder bracket to fasten the cable ladder SL 42.
KL 42 VA 4571
Type
mm
Width
25
7103 36 8
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
Cable ladder clamp
ST Steel FT Hot-dip galvanised /pc.
Cable ladder bracket to fasten the cable ladder SL 62.
KL 62 FT
Type
mm
Width
40
7103 38 7
Item No.
14.800
kg/100 pcs.
Weight
50
pcs
Pack.
Cable ladder clamp
V4A Stainless steel, 1.4571 Bright /pc.
Cable ladder bracket to fasten the cable ladder SL 62.
KL 62 VA 4571
Type
mm
Width
40
7103 39 3
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
Connector
ST Steel FT Hot-dip galvanised /pc.
The screw fastening ensures the continuity of the equipotential bonding.
Straight connector as external connector to connect cable ladders of type SL 42 and fittings with
a side height of 25mm.
SLV 42 FT
Type
mm
Width
31
7103 48 4
Item No.
10.000
kg/100 pcs.
Weight
10
pcs
Pack.
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
26/71
26 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Cableladdersystems
Connector
V4A Stainless steel, 1.4571 Bright /pc.
The screw fastening ensures the continuity of the equipotential bonding.
Straight connector as external connector to connect cable ladders and fittings with a side height
of 25mm.
SLV 42 VA 4571
Type
mm
Width
31
7103 49 2
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
Connector
ST Steel FT Hot-dip galvanised /pc.
The screw fastening ensures the continuity of the equipotential bonding.
Straight connector as external connector to connect cable ladders of type SL 62 and fittings with
a side height of 40mm.
SLV 62 FT
Type
mm
Width
52
7103 52 2
Item No.
27.200
kg/100 pcs.
Weight
30
pcs
Pack.
Connector
V4A Stainless steel, 1.4571 Bright /pc.
The screw fastening ensures the continuity of the equipotential bonding.
Straight connector as external connector to connect cable ladders and fittings with a side height
of 40mm.
SLV 62 VA 4571
Type
mm
Width
52
7103 52 9
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
Cable ladder with Z rung, light duty
ST Steel FT Hot-dip galvanised /m
The shipping cable ladder is also available in stainless steel on request. Bends are also availa-
ble on request.
Light duty shipping cable ladder with perforated side rail of side height 35 mm with welded, per-
forated Z rungs.
SLZ L 100 FT
Type
mm
Width
100
mm
Length
3000
7098 00 2
Item No.
0.000
kg/100 m
Weight
SLZ L 150 FT 150 3000 7098 00 40.000
SLZ L 200 FT200
3000 7098 00 60.000
SLZ L 300 FT 300 3000 7098 00 80.000
SLZ L 400 FT 400 3000 7098 01 00.000
SLZ L 500 FT 500 3000 7098 01 20.000
SLZ L 600 FT 600 3000 7098 01 40.000
ST Steel SG Pre-treated for welding /m
The shipping cable ladder is also available in stainless steel on request. Bends are also availa-
ble on request.
Light duty shipping cable ladder with perforated side rail of side height 35 mm with welded, per-
forated Z rungs.
SLZ L 100 SG
Type
mm
Width
100
mm
Length
3000
7098 03 2
Item No.
0.000
kg/100 m
Weight
SLZ L 150 SG 150 3000 7098 03 40.000
SLZ L 200 SG 200 3000 7098 03 60.000
SLZ L 300 SG300
3000 7098 03 80.000
SLZ L 400 SG 400 3000 7098 04 00.000
SLZ L 500 SG 500 3000 7098 04 20.000
SLZ L 600 SG 600 3000 7098 04 40.000
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
27/71
27OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Cableladdersystems
Cable ladder with Z rung, standard
ST Steel SG Pre-treated for welding /m
The shipping cable ladder is also available in stainless steel on request. Bends are also availa-
ble on request.
Shipping cable ladder with perforated side rail of side height 40mm with welded, perforated Z
rungs.
SLZ 100 SG
Type
mm
Width
100
mm
Length
3000
7098 16 2
Item No.
0.000
kg/100 m
Weight
SLZ 200 SG 200 3000 7098 16 40.000
SLZ 300 SG 300 3000 7098 16 60.000
SLZ 400 SG 400 3000 7098 16 80.000
SLZ 500 SG500
3000 7098 17 00.000
SLZ 600 SG 600 3000 7098 17 20.000
SLZ 700 SG 700 3000 7098 17 40.000
SLZ 800 SG 800 3000 7098 17 60.000
SLZ 900 SG 900 3000 7098 17 80.000
SLZ 1000 SG 1000 3000 7098 18 00.000
SLZ 1200 SG 1200 3000 7098 18 20.000
ST Steel FT Hot-dip galvanised /m
The shipping cable ladder is also available in stainless steel on request. Bends are also availa-ble on request.
Shipping cable ladder with perforated side rail of side height 40mm with welded, perforated Z
rungs.
SLZ 100 FT
Type
mm
Width
100
mm
Length
3000
7098 13 2
Item No.
0.000
kg/100 m
Weight
SLZ 200 FT
200
3000 7098 13 40.000SLZ 300 FT 300 3000 7098 13 60.000
SLZ 400 FT 400 3000 7098 13 80.000
SLZ 500 FT 500 3000 7098 14 00.000
SLZ 600 FT 600 3000 7098 14 20.000
SLZ 700 FT 700 3000 7098 14 40.000
SLZ 800 FT 800 3000 7098 14 60.000
SLZ 900 FT 900 3000 7098 14 80.000
SLZ 1000 FT 1000 3000 7098 15 00.000
SLZ 1200 FT 1200 3000 7098 15 20.000
B1
B
t1 t
B1
B
t1 t
Tightening strap
ST Steel G Electrogalvanised /100 m
Galvanised tightening strap and with plastic covering for fastening on cable trays and ladders.
574 G STGR
Type
mm
Dimen-sion
17 x 1.0
kN
Minimumbreakingload
1350
Colour
Stone grey
m
Boxqty.
250
6490 01 8
Item No.
5.880
kg/100 m
Weight
25
m
Pack.
B1
B
t1 t
B1
B
t1 t
V4A Stainless steel, 1.4571 V2A Stainless steel 1.4310 /100 m
Tightening strapmade of rustproof steel and with plastic covering for fastening on cable trays
and ladders.
574 03 SW
Type
mm
Dimen-sion
17 x 1.0
kN
Minimumbreakingload
2250
Colour
Black
m
Boxqty.
250
6490 02 6
Item No.
6.950
kg/100 m
Weight
25
m
Pack.
574 03 BA 17 x 1.0 2250 Blue anthracite 250 6490 03 46.95025
574 03 BR
17 x 1.0
2250
Chestnut brown
6490 02 8
0.000
1
LL
Tightening strap in fixed lengths
V2A Stainless steel 1.4310 /100 pc.
Tightening strap, 574/03/VA and 574/05/VA, completely preterminated with tightening strap
lock.
574 03 30 BA
Type
mm
Dimen-sion
17 x 1.0
mm
Length
300
Colour
Blue anthracite
pcs
Boxqty.
500
6490 10 7
Item No.
2.700
kg/100 pcs.
Weight
25
pcs
Pack.
574 03 45 BA 17 x 1.0 450 Blue anthracite 250 6490 12 33.60025
574 05 55 GNBG 16.5 x 1.2 550 Green-beige 250 6490 15 85.80025
574 05 65 GNBG 16.5 x 1.2 650 Green-beige 250 6490 17 46.60025
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
28/71
28 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Cableladdersystems
LL
Tightening strap in fixed lengths
ST Steel
G Electrogalvanised /100 pc.
Tightening strap, 574/03/, electrogalvanised, completely pre-terminated with tightening strap
lock.
574 03 30 STGR
Type
mm
Dimen-sion
17 x 1.0
mm
Length
300
Colour
Stone grey
pcs
Boxqty.
6490 10 9
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
574 03 45 STGR 17 x 1.0 450 Stone grey 6490 12 50.0001
574 03 55 STGR 17 x 1.0 550 Stone grey 6490 13 50.0001
574 03 65 STGR 17 x 1.0 650 Stone grey 6490 14 50.0001
LL
Tightening strap in fixed lengths
V2A Stainless steel, 1.4301 /100 pc.
Tightening strap, 574/03/VA and 574/05/VA, completely pre-terminated with tightening strap
lock.
574 03 30 SW
Type
mm
Dimen-sion
17 x 1.0
mm
Length
300
Colour
Black
pcs
Boxqty.
6490 11 1
Item No.
0.000
kg/100 pcs.
Weight
1
pcs
Pack.
574 03 45 SW 17 x 1.0 450 Black 6490 12 70.0001
574 03 55 SW 17 x 1.0 550 Black 6490 13 70.0001
574 03 65 SW 17 x 1.0 650 Black 6490 14 70.0001
1
4
2025
1
4
2025
Tightening strap lock
ST Steel DD Zinc-aluminium coated, double-dip /100 pc.
Tightening strap lock formounting under the ceiling.
192
Type
pcs
Boxqty.
1200
6490 90 5
Item No.
1.006
kg/100 pcs.
Weight
100
pcs
Pack.
18
1
18
4
18
1
18
4
V2A Stainless steel, 1.4301 /100 pc.
Tightening strap lock for single-sided locking of tightening strap in problematic areas.
197 VA4301
Type
pcs
Boxqty.
1800
6490 96 4
Item No.
0.560
kg/100 pcs.
Weight
100
pcs
Pack.
Spring chuck
ST Steel /pc.
For tightening strap 574/...
Mounting of the tightening strap:
1. Cut the strap to the right length, push it through the lock and turn it over.
2. Loop the strap around the cable, push the loose end through the lock.
3. Tighten the end of the strap with the pliers.
4. Turn the end of the taut strap with the pliers. Remove the pliers.
5. Complete turnover the turned end of the strap with the hammer,
secure the end of the strap by hitting the two standing lobes of the lock.
575
Type
6498 01 9
Item No.
29.700
kg/100 pcs.
Weight
1
pcs
Pack.
Spring chuck
ST Steel /pc.
For tightening strap 574/...
576
Type
6498 02 7
Item No.
132.000
kg/100 pcs.
Weight
1
pcs
Pack.
Cable ladder systems
8/13/2019 Loesungen Schiffbau En
29/71
12
LSBLsung
skatalog
Schiffsbau_International/en
/07/04/2010
(LLEx
port_01016)
29OBOLSB
8/13/2019 Loesungen Schiffbau En
30/71
30 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
8/13/2019 Loesungen Schiffbau En
31/71
8/13/2019 Loesungen Schiffbau En
32/71
32 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Junction box
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This plastic is soft, whichmeans that it ismalleable. This allows
installation of cables either directly through the 4 x M25 seals, or the seals can be cut with a
knife at the pre-marked points, in order to create an insertion opening for cables or pipes. In ad-
dition, cableglands can be inserted through the openings instead of the seals and locked with a
locknut from inside.
The cable junction boxes can be screwed onto an M6 thread or mounted onmounting plates in
the openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 63 x 45mm.
Cover with labelling panel.
T 25
Type
Version
Standard
Entries
4 x M25
Colour
Light grey
pcs
Boxqty.
125
2007 02 9
Item No.
4.190
kg/100 pcs.
Weight
5
pcs
Pack.
T 25 RW 4 x M25 Pure white 125 2007 50 94.1905
T 25 F 960 C flame-resistant 4 x M25 Light grey 125 2007 31 24.1905
T 25 RO-LGR With red lid 4 x M25 Red grey 125 2007 62 24.1905
T 25 UV RWUV-resistant
4 x M25
Pure white
125 2007 40 84.1905
T 25 KL With terminal strip 4 x M25 Light grey 125 2007 43 06.4005
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 7 xM25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an
insertion opening for cables or pipes. Alternatively, cableglands can be pushed through the
openings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 77 x 77 x 46mm
Cover with labelling panel and lead-sealed.
T 40
Type
Version
Standard
Entries
7 x M25
Colour
Light grey
pcs
Boxqty.
80
2007 04 5
Item No.
6.700
kg/100 pcs.
Weight
5
pcs
Pack.
T 40 RW 7 x M25 Pure white 80 2007 51 76.7005
T 40 F 960 C flame-resistant 7 x M25 Light grey 80 2007 32 06.7005
T 40 RO-LGR With red lid 7 x M25 Red grey 80 2007 63 06.7005
T 40 UV RW UV-resistant 7 x M25 Pure white 80 2007 41 06.7005
T 40 KL With terminal strip 7 x M25 Light grey 80 2007 43 28.9005
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 7 x
M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an
insertion opening for cables or pipes. Alternatively, cableglands can be pushed through theopenings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 100 x 100 x 48 mm
Cover with labelling panel and lead-sealed.
T 60
Type
Version
Standard
Entries
7 x M25
Colour
Light grey
pcs
Boxqty.
60
2007 06 1
Item No.
12.300
kg/100 pcs.
Weight
5
pcs
Pack.
T 60 RW 7 x M25 Pure white 60 2007 52 512.3005
T 60 F 960 C flame-resistant 7 x M25 Light grey 60 2007 33 912.3005
T 60 RO-LGR With red cover 7 x M25 Red grey 60 2007 63 812.3005
T 60 UV RW UV-resistant 7 x M25 Pure white 60 2007 41 212.3005
T 60 KL With terminal strip 7 x M25 Light grey 60 2007 43 416.7005
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
33/71
33OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Connection,
fasteningan
dcableroutingsystems
Junction box
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 10 x
M25 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an
insertion opening for cables or pipes. Alternatively, cableglands can be pushed through the
openings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 136 x 102 x 57 mm
Cover with labelling panel and lead-sealed.
T 100
Type
Version
Standard
Entries
10 x M25
Colour
Light grey
pcs
Boxqty.
40
2007 07 7
Item No.
16.270
kg/100 pcs.
Weight
1
pcs
Pack.
T 100 M25-M32 Large entry8 x M252 x M32
Light grey
40 2007 08 116.3001
T 100 RW 10 x M25 Pure white 40 2007 53 316.2701
T 100 F 960 C flame-resistant 10 x M25 Light grey 402007 34 7
16.2701
T 100 RO-LGR With red lid 10 x M25 Red grey 40 2007 64 416.2701
T 100 UV RW UV-resistant 10 x M25 Pure white 40 2007 41 416.5001
T 100 KL With terminal strip 10 x M25 Light grey 40 2007 43 640.0001
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 7x
M25 +5x M32 seals, or the seals can be cut with a knife at the pre-marked points, in order to
create an insertion opening for cables or pipes. Alternatively, cableglands can be pushedthrough the openings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 176 x 135 x 67 mm
Cover with labelling panel and lead-sealed.
T 160
Type
Version
Standard
Entries
7 x M255 x M32
Colour
Light grey
pcs
Boxqty.
20
2007 09 3
Item No.
30.000
kg/100 pcs.
Weight
1
pcs
Pack.
T 160 M32 Large entry 10 x M32 Light grey 20 2007 09 730.0001
T 160 RW
7 x M255 x M32
Pure white
20 2007 54 130.0001
T 160 F 960 C flame-resistant7 x M255 x M32
Light grey
20 2007 35 530.0001
T 160 RO-LGR With red lid7 x M255 x M32
Red grey
20 2007 64 930.0001
T 160 UV RW UV-resistant7 x M255 x M32
Pure white
20 2007 41 629.5001
T 160 KL With terminal strip7 x M255 x M32
Light grey
20 2007 44 064.2001
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 9x
M25 +7x M32 seals, or the seals can be cut with a knife at the pre-marked points, in order to
create an insertion opening for cables or pipes. Alternatively, cableglands can be pushed
through the openings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 225 x 173 x 86 mm
Cover with labelling panel and lead-sealed.
T 250
Type
Version
Standard
Entries
9 x M257 x M32
Colour
Light grey
pcs
Boxqty.
8
2007 10 9
Item No.
50.000
kg/100 pcs.
Weight
1
pcs
Pack.
T 250 RW
9 x M257 x M32
Pure white
8 2007 55 450.0001
T 250 F 960 C flame-resistant9 x M257 x M32
Light grey
8 2007 36 350.0001
T 250 RO-LGR With red lid9 x M25
7 x M32
Red grey
8 2007 65 750.0001
T 250 UV RW UV-resistant 9 x M257 x M32
Pure white
8 2007 41 844.8001
T 250 KL With terminal strip9 x M257 x M32
Light grey
8 2007 44 479.5001
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
34/71
34 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Junction box
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
F version: highly flame-resistant, testing temperature 960 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with plug-in sealsmade
of ethylene vinyl acetate (EVA). This allows installation of cables either directly through the 16x
M32 +8x M40 seals, or the seals can be cut with a knife at the pre-marked points, in order to
create an insertion opening for cables or pipes. Alternatively, cableglands can be pushed
through the openings instead of the seals and locked with a locknut from the inside.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 267 x 182 x 110mm
Cover with labelling panel and lead-sealed.
T 350
Type
Version
Standard
Entries
16 x M328 x M40
Colour
Light grey
pcs
Boxqty.
5
2007 12 5
Item No.
63.000
kg/100 pcs.
Weight
1
pcs
Pack.
T 350 RW
16 x M328 x M40
Pure white
5 2007 56 863.0001
T 350 F 960 C flame-resistant16 x M32
8 x M40
Light grey
5 2007 37 163.0001
T 350 RO-LGR With red lid16 x M328 x M40
Red grey
5 2007 66 563.0001
T 350 UV RW UV-resistant16 x M328 x M40
Pure white
5 2007 42 063.0001
T 350 KL With terminal strip16 x M328 x M40
Light grey
5 2007 44 8120.0001
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The cable junction boxes aremade of a thermoplastic polypropylene polymer with closed side
walls. Thismeans that openings can bemade wherever they are required. These openings can
be closed off with EDK plug-in seals to allow cable installation through the seal. In addition, ca-
bleglands can be inserted through the openings instead of the seals and locked with a locknut
from inside.
The cable junction boxes can be screwed onto an M6 thread or mounted onmounting plates in
the openings on the floor using steel bolts 3.5 x 9.5.
Clear internal dimensions: 77 x 77 x 46mm.
Cover with labelling panel.
T 40 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
80
2007 22 3
Item No.
6.300
kg/100 pcs.
Weight
5
pcs
Pack.
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with closed side walls.
Thismeans that the required openings can bemade wherever they are required. EDK plug-in
seals or cableglands with locknuts can be inserted in these openings, to allow cable insertion.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 100 x 100 x 46 mm
Cover with labelling panel and lead-sealed.
T 60 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
60
2007 23 9
Item No.
12.000
kg/100 pcs.
Weight
5
pcs
Pack.
PP Polypropylene /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with closed side walls.
Thismeans that the required openings can bemade wherever they are required. EDK plug-in
seals or cableglands with locknuts can be inserted in these openings, to allow cable insertion.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 136 x 102 x 57 mm
Cover with labelling panel and lead-sealed.
T 100 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
40
2007 25 5
Item No.
16.200
kg/100 pcs.
Weight
1
pcs
Pack.
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
35/71
35OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Connection,
fasteningan
dcableroutingsystems
Junction box
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with closed side walls.
Thismeans that the required openings can bemade wherever they are required. EDK plug-inseals or cableglands with locknuts can be inserted in these openings, to allow cable insertion.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.Clear internal dimensions: 176 x 135 x 67 mm
Cover with labelling panel and lead-sealed.
T 160 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
20
2007 27 1
Item No.
30.000
kg/100 pcs.
Weight
1
pcs
Pack.
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with closed side walls.
Thismeans that the required openings can bemade wherever they are required. EDK plug-in
seals or cableglands with locknuts can be inserted in these openings, to allow cable insertion.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.Clear internal dimensions: 225 x 173 x 86 mm
Cover with labelling panel and lead-sealed.
T 250 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
8
2007 28 7
Item No.
48.300
kg/100 pcs.
Weight
1
pcs
Pack.
PP/GF Polypropylene, Glass-fibre reinforced /100 pc.
Standard version: flame-resistant, testing temperature 650 C.
The junction boxes aremade of a thermoplastic polypropylene polymer with closed side walls.
Thismeans that the required openings can bemade wherever they are required. EDK plug-in
seals or cableglands with locknuts can be inserted in these openings, to allow cable insertion.
The junction boxes can bemounted onmounting plates in the openings on the floor using steel
screws 3.5 x 9.5.
Clear internal dimensions: 267 x 182 x 110mm
Cover with labelling panel and lead-sealed.
T 350 OE
Type
Version
Closed
Entries
None
Colour
Light grey
pcs
Boxqty.
5
2007 30 3
Item No.
58.800
kg/100 pcs.
Weight
1
pcs
Pack.
Mounting plates
ST Steel FS Strip-galvanised /pc.
Please order the truss-head bolt, type FRSB 6 x 12, separately.
Mounting plate, for fastening on the side rail of cable support systems.
MP UNI FS
Type
mm
Height
115
mm
Width
170
7084 77 3
Item No.
13.300
kg/100 pcs.
Weight
40
pcs
Pack.
ST Steel
FS Strip-galvanised /pc.
Please order the truss-head bolt, type FRS B6 x 12, separately.
Flatmounting plate, for fixing on the side rail of the cable tray.
MP FL FS
Type
mm
Height
235
mm
Width
120
7084 75 7
Item No.
19.200
kg/100 pcs.
Weight
40
pcs
Pack.
ST Steel FS Strip-galvanised /pc.
Please order the truss-head bolt, type FRS B6 x 12, separately.
Curvedmounting plate, for fastening on the side rail of the cable tray.
MP WI KL. FS
Type
mm
Height
210
mm
Width
120
7084 76 5
Item No.
20.200
kg/100 pcs.
Weight
20
pcs
Pack.
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
36/71
36 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Screwless terminal
PA Polyamide /100 pc.
Screwless terminal to connect single-strand cables.
Nominal cross-section:3 x 0.5mmto 2.5mmsingle-wire cable.
3 x 1.5mmto 2.5mmrigid,multi-wire cable.
Rated voltage 450 VRated current 24 A
Stripping length: 89mm
Inspection opening: Phase tester and testing pin (max. 2mm)
61 325 LGR
Type
Colour
Light grey
pcs
Boxqty.
2000
2054 48 5
Item No.
0.135
kg/100 pcs.
Weight
100
pcs
Pack.
PA Polyamide /100 pc.
Screwless terminal to connect single-strand cables.
Nominal cross-section:
5 x 0.5mmto 2.5mmsingle-wire cable
5 x 1.5mmto 2.5mmrigid,multi-wire cable
Rated voltage 450 V
Rated current 24 A
Stripping length: 89mm
Inspection opening: phase tester and testing pin (max. 2mm)
61 525 LGR
Type
Colour
Light grey
pcs
Boxqty.
2000
2054 50 7
Item No.
0.300
kg/100 pcs.
Weight
100
pcs
Pack.
PA Polyamide /100 pc.
Screwless terminal to connect single-strand cables.
Nominal cross-section:
8 x 0.5mmto 2.5mmsingle-wire cable.
8 x 1.5mmto 2.5mmrigid,multi-wire cable.
Rated voltage 450 V
Rated current 24 A
Stripping length: 89mm
Inspection opening: phase tester and testing pin (max. 2mm)
61 825 LGR
Type
Colour
Light grey
pcs
Boxqty.
1000
2054 52 3
Item No.
0.490
kg/100 pcs.
Weight
50
pcs
Pack.
Terminal strip
PP Polypropylene /100 pc.
Tested to EN 60998.
Brass terminals, steel screws, electrogalvanised, 12-pole, individual terminals detachable from
strips.
Captive upwards screw.
Max. approved ambient temperature to EN 60998: 5 to +80 C.
Nominal cross-section 35mm.
Nominal voltage 1000 V.
Nominal current 125A.
Max. attachment each side: 35mm multi-wire or 25mmfine-wire without wire end sleeve.
80 CE SW
Type
Colour
Black
pcs
Boxqty.
50
2056 59 3
Item No.
17.400
kg/100 pcs.
Weight
10
pcs
Pack.
PA Polyamide /100 pc.
Brass terminals, steel screws,galvanised and blue passivated, 12-pole, individual terminals de-
tachable.
Captive upwards screw.
Nominal cross-section 4mm.
Nominal voltage 450 V.
Nominal current 32A.
Max. attachment each side: 4mmsingle wire or 2.5mmfine wire with wire end sleeve
Maximum approved ambient temperature to EN 60998: 5 to +85 C.
72 VDE
Type
Colour
Transparent
pcs
Boxqty.
500
2055 92 9
Item No.
2.000
kg/100 pcs.
Weight
10
pcs
Pack.
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
37/71
37OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Connection,
fasteningan
dcableroutingsystems
Terminal strip
PA Polyamide /100 pc.
With wire protection clamp.
Tested to EN 60998.Brass terminals, steel screws,galvanised and blue passivated, 12-pole, individual terminals de-
tachable.
Captive upwards screw.Nominal cross-section 4mm.
Nominal voltage 450 V.
Nominal current 32A.
Max. attachment each side: 4mmsingle-wire or 4mmfine-wire without wire end sleeve.
Maximum approved ambient temperature to EN 60998: 5 to +85 C.
74 D
Type
Colour
Transparent
pcs
Boxqty.
200
2056 17 8
Item No.
3.680
kg/100 pcs.
Weight
10
pcs
Pack.
E
L
L2
SW
L1
G
D
E
L
L2
SW
L1
G
D Cable gland, plastic
PA Polyamide /100 pc.
Withmetric connecting thread to IEC 423 robust cap-nut cablegland with large sealing area.
Strain relief, wringing protection and tightness over the whole clamping area. Sealing ring of
chloroprene/nitrile rubber. Moulded sealing on the intermediate support, so no connection
thread sealing ringneeded, tested to VDE DIN EN 50262, protection rating IP 68 at 5 bar/1 hr.
Max. permitted ambient temperature 20 C to +65 C.
V-TEC VM12 LGR
Type
Thread
M12 x 1,5
Colour
Light grey
pcs
Boxqty.
500
2022 86 2
Item No.
0.318
kg/100 pcs.
Weight
50
pcs
Pack.
V-TEC VM16 LGR M16 x 1,5 Light grey 500 2022 86 40.63850
V-TEC VM20 LGR M20 x 1,5 Light grey 600 2022 86 60.86150
V-TEC VM25 LGRM25 x 1,5
Light grey
300 2022 86 81.34425
V-TEC VM32 LGR M32 x 1,5 Light grey 240 2022 87 02.23020
V-TEC VM40 LGR M40 x 1,5 Light grey 120 2022 87 23.46710
V-TEC VM50 LGR M50 x 1,5 Light grey 60 2022 87 45.4665
V-TEC VM63 LGR M63 x 1,5 Light grey 60 2022 87 68.3065
Locknut, plastic
PA Polyamide /100 pc.
Locknut DIN 46319, withmetric thread IEC 423.
116 M12 LGR PA
Type
Thread
M12x1,5
Colour
Light grey
pcs
Boxqty.
2000
2048 90 6
Item No.
0.100
kg/100 pcs.
Weight
100
pcs
Pack.
116 M16 LGR PA M16x1,5 Light grey 1000 2048 91 40.160100
116 M20 LGR PA M20x1,5 Light grey 1200 2048 92 20.250100
116 M25 LGR PA M25x1,5 Light grey 1000 2048 93 00.350100
116 M32 LGR PA M32x1,5 Light grey 500 2048 94 90.61050
116 M40 LGR PA M40x1,5 Light grey 250 2048 95 71.68325
116 M50 LGR PA M50x1,5 Light grey 250 2048 96 50.89025
116 M63 LGR PA M63x1,5 Light grey 200 2048 97 31.83025
L
D
G
L
D
G
Screw plug, plastic
PS Polystyrene /100 pc.
Screw plug in accordance with DIN 46320, withmetric thread to IEC 423.
108 M12 PS
Type
Thread
M12 x 1,5
mm
Dimen-sion D
15
mm
Dimen-sion L
6
Colour
Light grey
pcs
Boxqty.
3000
2033 00 3
Item No.
0.146
kg/100 pcs.
Weight
100
pcs
Pack.
108 M16 PS M16 x 1,5 20 6 Light grey 1800 2033 00 70.161100
108 M20 PS M20 x 1,5 24 6 Light grey 1200 2033 01 10.209100
108 M25 PS M25 x 1,5 30 8 Light grey 1000 2033 01 60.355100
108 M32 PS M32 x 1,5 37 8 Light grey 500 2033 02 10.35250
108 M40 PS M40 x 1,5 46 8 Light grey 300 2033 02 61.28025
108 M50 PS M50 x 1,5 56 10 Light grey 300 2033 03 21.40025
108 M63 PS M63 x 1,5 70 12 Light grey 300 2033 03 81.85025
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
38/71
38 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Screw-in nipple, plastic
PE Polyethylene /100 pc.
With perforationmembranes, the opening D is pre-marked, but closed.
Grip seal to screw intometric thread to IEC 423.
With self-sealing cone at the end of the thread, therefore no connection thread sealing ring re-
quired.
Protection rating achievable with carefulmounting: IP54.
90 M12 GE
Type
Thread
M12 x 1,5
Colour
Light grey
pcs
Boxqty.
3000
2032 37 8
Item No.
0.170
kg/100 pcs.
Weight
100
pcs
Pack.
90 M16 GE M16 x 1,5 Light grey 2600 2032 38 00.192100
90 M20 GE M20 x 1,5 Light grey 1600 2032 38 20.268100
90 M25 GE M25 x 1,5 Light grey 500 2032 38 40.51350
90 M32 GEM32 x 1,5
Light grey
250 2032 38 60.69425
90 M40 GE M40 x 1,5 Light grey 120 2032 38 80.87510
Cable gland, brass
CuZn Brass N Nickel-plated /100 pc.
Withmetric connecting thread to IEC 423 robust cap-nut cablegland with large sealing area.
Strain relief, wringing protection and tightness over the whole clamping area. Neoprene sealing
ring. Polyamide terminal insert. With pre-mounted sealing ring on connection thread, VDE-tested
to DIN EN 50262, protection rating IP 68 at 5 bar for 1 hr.
* Prices according to DEL notation.
V-TEC VM12 MS
Type
Thread
M12 x 1,5
Surface finish
Nickel-plated
pcs
Boxqty.
500
2086 01 8
Item No.
1.200
kg/100 pcs.
Weight
50
pcs
Pack.
V-TEC VM16 MS M16 x 1,5 Nickel-plated 600 2086 02 41.64050
V-TEC VM20 MS M20 x 1,5 Nickel-plated 250 2086 03 03.14025
V-TEC VM25 MSM25 x 1,5
Nickel-plated
300 2086 03 64.26025
V-TEC VM32 MS M32 x 1,5 Nickel-plated 160 2086 04 27.16020
V-TEC VM40 MS M40 x 1,5 Nickel-plated 60 2086 04 812.2405
V-TEC VM50 MS M50 x 1,5 Nickel-plated 45 2086 05 422.7005
V-TEC VM63 MS M63 x 1,5 Nickel-plated 40 2086 06 030.3005
SW
G
E
D1/D2
L2 L
L1
L3
SW
G
E
D1/D2
L2 L
L1
L3
CuZn Brass N Nickel-plated /100 pc.
Withmetric connecting thread to IEC 423 robust cap-nut cablegland with large sealing area.
Strain relief, wringing protection and tightness over the whole clamping area. For thicker housing
wall thicknesses in conjunction with locknuts. Neoprene sealing ring. Polyamide terminal insert.
With pre-mounted sealing ring on connection thread, VDE-tested to DIN EN 50262, protection
rating IP 68 at 5 bar for 1 hr.
With long connection thread.
* Prices according to DEL notation.
V-TEC VM LM12 MS
Type
Thread
M12 x 1,5
Surface finish
Nickel-plated
pcs
Boxqty.
500
2086 11 1
Item No.
1.300
kg/100 pcs.
Weight
50
pcs
Pack.
V-TEC VM LM16 MS M16 x 1,5 Nickel-plated 600 2086 11 71.94050
V-TEC VM LM20 MSM20 x 1,5
Nickel-plated
300 2086 12 33.36025
V-TEC VM LM25 MS M25 x 1,5 Nickel-plated 250 2086 12 94.80025
V-TEC VM LM32 MS M32 x 1,5 Nickel-plated 120 2086 13 57.84010
V-TEC VM LM40 MS M40 x 1,5 Nickel-plated 60 2086 14 113.4005
V-TEC VM LM50 MS M50 x 1,5 Nickel-plated 45 2086 14 724.0005
V-TEC VM LM63 MS M63 x 1,5 Nickel-plated 40 2086 15 332.1005
Locknut, brass
CuZn Brass N Nickel-plated /100 pc.
Locknuts DIN 46319 withmetric thread IEC 423.
* Price according to DEL notation.
169 MS M12
Type
Thread
M12 x 1,5
Surface finish
Nickel-plated
pcs
Boxqty.
2600
2091 60 7
Item No.
0.220
kg/100 pcs.
Weight
100
pcs
Pack.
169 MS M16 M16 x 1,5 Nickel-plated 4800 2091 61 50.310100
169 MS M20 M20 x 1,5 Nickel-plated 3200 2091 62 30.580100
169 MS M25 M25 x 1,5 Nickel-plated 1800 2091 63 10.880100
169 MS M32 M32 x 1,5 Nickel-plated 1200 2091 65 81.120100
169 MS M40 M40 x 1,5 Nickel-plated 600 2091 66 61.92050
169 MS M50 M50 x 1,5 Nickel-plated 500 2091 67 43.07050
169 MS M63 M63 x 1,5 Nickel-plated 250 2091 68 25.72025
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
39/71
39OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Connection,
fasteningan
dcableroutingsystems
G
D
L
G
D
L
Screw plug, brass
CuZn Brass N Nickel-plated /100 pc.
Screw plug in accordance with DIN 46320, withmetric thread to DIN EN 60423 or ISO 68.
* Prices according to DEL notation.
168 MS M12
Type
Thread
M12 x 1,5
mm
Dimen-sion D
16
mm
Dimen-sion L
5
Surface finish
Nickel-plated
pcs
Boxqty.
3000
2090 51 1
Item No.
0.390
kg/100 pcs.
Weight
100
pcs
Pack.
168 MS M16 M16 x 1,5 20 6 Nickel-plated 2000 2090 53 80.640100
168 MS M20 M20 x 1,5 22 6.5 Nickel-plated 1000 2090 54 60.930100
168 MS M25 M25 x 1,5 28 7 Nickel-plated 500 2090 55 41.85050
168 MS M32M32 x 1,5
35
8Nickel-plated
200 2090 56 22.81050
168 MS M40 M40 x 1,5 45 8 Nickel-plated 100 2090 57 05.29050
168 MS M50 M50 x 1,5 55 9 Nickel-plated 100 2090 58 96.31025
168 MS M63 M63 x 1,5 68 10 Nickel-plated 50 2090 59 712.57025
Plug-in seal
PVC Polyvinylchloride /100 pc.
Plug-in seals are used to run pipes tight to the junction box.
EDR 25 16-20 LGR
Type
Size
M25
mm
For
Colour
Light grey
pcs
Boxqty.
50
2011 50 6
Item No.
0.520
kg/100 pcs.
Weight
50
pcs
Pack.
EDR 25 20-25 LGR M25 Light grey 50 2011 51 40.68050
EDR 32 20-25 LGR M32 Light grey 50 2011 52 21.02050
EDR 32 25-32 LGR M32 Light grey 50 2011 53 01.17050
EDR 40 25-32 LGRM40
Light grey
25 2011 53 81.95025
EDR 40 32-40 LGR M40 Light grey 25 2011 54 62.20025
Aquasit casting compound
/pc.
Aquasit is a two-component casting compound in a cartridge for applications in areas with con-
tinuous and extremely high levels ofmoisture. It can also be used formechanical shock and vi-
brations.
The cartridge is suitable for use in standard cartridge pistols. The unopened aluminium packag-ing can be stored for up to a year at room temperature. After opening the cartridge, themateri-
almust be used within 24 hours.
Aquasit properties:
Protection rating: IP68 at 1.8 bar/1,000 h
Rated voltage: 400 V
Penetration resistance: >20 kv/mm to VDE 0291 Part 2Operating temperature: 40 to +90 C
Processing temperature: 0 to +40 C
Halogen-free, silicon-free, isocyanite-free
Environmentally friendly and without the need to be labelled
KVM
Type
l
Contents
0.25
2363 01 0
Item No.
42.000
kg/100 pcs.
Weight
1
pcs
Pack.
Mixer pipe
/VPE
10mixer pipes in the set.
Simple, automaticmixing of OBO AQUASIT when pressing out the compound from the car-
tridge.
KVM-M
Type
2363 01 5
Item No.
17.000
kg/100 PUs
Weight
1
PU
Pack.
Cartridge pistol
/pc.
High-quality 1-K cartridge for use with the AQUASIT cold casting compound. The cartridge pistol
can also be used with normal 300mm cartridges.
KVM-P
Type
2363 01 9
Item No.
100.000
kg/100 pcs.
Weight
2
pcs
Pack.
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
40/71
40 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Electrical insulating and sealing compound
/100 pc.
In rods.
Permanently elastic, fibre-free sealing kit on a polymer and amineral basis to fill cavities in in-stallations, e.g. cableglands or similar components, to prevent the entry of dirt and water,
Colour: Green-greyCharacteristics of the sealing kit:
Halogen-, acid- and silicone-free
Can also be processed at low temperatures
Permanent heat resistance to +80 C
Corrosion-resistant
Low water consumption
Good insulation properties
Puncture strength 16 kV/mm to VDE 0291 Part 2
Can be stored almost indefinitely
115 GR-GN
Type
Colour
Natural
pcs
Boxqty.
90
2340 03 8
Item No.
11.020
kg/100 pcs.
Weight
10
pcs
Pack.
Steel armouredpipes
ST Steel FT Hot-dip galvanised /100 m
Electrical installation pipe with threaded ends to EN 61386 (Code: 5557) formechanical protec-
tion of cables.
One connection sleeve is already screwed onto each pipe.
SM16 FT
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
3000
mm
Dimen-sion l
13
mm
Dimen-sion t
1.25
Coding
2047 33 6
Item No.
43.800
kg/100 m
Weight
51
m
Pack.
SM20 FT M20x1,5 3000 14 1.25 2047 33 957.80051
SM25 FT M25x1,5 3000 19 1.25 2047 34 273.20030
SM32 FT M32x1,5 3000 19 1.35 2047 34 5102.00021
SM40 FT M40x1,5 3000 19 1.35 2047 34 8128.70015
SM50 FT M50x1,5 3000 24 1.45 2047 35 1173.60015
SM63 FT M63x1,5 3000 27 1.85 2047 35 4264.3009
V2A Stainless steel, 1.4301 /100 m
Stainless steel electrical installation pipe with threaded ends to EN 61386 (Code: 5557) forme-
chanical protection of cables.
One connection sleeve is already screwed onto each pipe.
SM16 VA
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
3000
mm
Dimen-sion l
13
mm
Dimen-sion t
1.5
2047 65 7
Item No.
53.600
kg/100 m
Weight
51
m
Pack.
SM20 VA M20x1,5 3000 14 1.5 2047 65 868.40051
SM25 VA
M25x1,5
3000
19
1.5 2047 66 086.90030SM32 VA M32x1,5 3000 19 1.5 2047 66 1112.80021
SM40 VA M40x1,5 3000 19 1.5 2047 66 2142.40015
ST Steel
FT Hot-dip galvanised /100 m
Electrical installation pipe without threaded ends to EN 61386 (Code: 5557) formechanical pro-
tection of cables.
S16 FT
Type
mm
Dimen-sion D
16
mm
Dimen-sion L
3000
mm
Dimen-sion t
0.95
2047 30 6
Item No.
35.300
kg/100 m
Weight
51
m
Pack.
S20 FT 20 3000 0.95 2047 30 944.60051
S25 FT 25 3000 1.05 2047 31 262.00030
S32 FT 32 3000 1.15 2047 31 587.50021
S40 FT 40 3000 1.25 2047 31 8119.50015
S50 FT 50 3000 1.25 2047 32 1150.30015
S63 FT 63 3000 1.35 2047 32 4212.7009
V2A Stainless steel, 1.4301 /100 m
Stainless steel electrical installation pipe without threaded ends to EN 61386 (Code: 5557)
formechanical protection of cables.
S16 VA
Type
mm
Dimen-sion D
16
mm
Dimen-sion L
3000
mm
Dimen-sion t
1
2047 65 0
Item No.
37.000
kg/100 m
Weight
51
m
Pack.
S20 VA 20 3000 1 2047 65 146.90051
S25 VA 25 3000 1 2047 65 259.20030
S32 VA 32 3000 1.25 2047 65 394.80021
S40 VA 40 3000 1.25 2047 65 4119.50015
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
41/71
41OBOLSB
g
g
_
(
p
_
)
Always indicate the article number when ordering.
Connection,
fasteningan
dcableroutingsystems
Steel armouredpipes
ST Steel FT Hot-dip galvanised /100 pc.
Accessory part: 90bend for electrical installation pipes with threaded ends to EN 61386
(Code: 5557).
One connection sleeve is already screwed onto each pipe bend.
SBM16 FT
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
178
mm
Dimen-sion l
13
mm
Dimen-sion A
65
mm
Dimen-sion R
97
mm
Dimen-sion t
1.25
2047 50 1
Item No.
8.000
kg/100 pcs.
Weight
10
pcs
Pack.
SBM20 FT M20x1,5 183 14 53 110 1.25 2047 50 210.50025
SBM25 FT M25x1,5 207 17 59 123 1.25 2047 50 325.00025
SBM32 FT M32x1,5 245 19 69 144 1.35 2047 50 442.00025
SBM40 FTM40x1,5
288
19
83
165
1.35 2047 50 565.00010
SBM50 FT M50x1,5 346 24 106 190 1.45 2047 50 6122.0005
SBM63 FT M63x1,5 467 27 175 229 1.85 2047 50 7209.0005
V2A Stainless steel, 1.4301 /100 pc.
Accessory part: 90bend, stainless steel, for electrical installation pipes with threaded ends to
EN 61386 (Code: 5557).
One connection sleeve is already screwed onto each pipe bend.
SBM16 VA
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
178
mm
Dimen-sion l
13
mm
Dimen-sion A
65
mm
Dimen-sion R
97
mm
Dimen-sion t
1.5
2047 69 0
Item No.
8.000
kg/100 pcs.
Weight
10
pcs
Pack.
SBM20 VA M20x1,5 183 14 53 110 1.5 2047 69 210.50025
SBM25 VA M25x1,5 207 17 59 123 1.5 2047 69 325.00025
SBM32 VA M40x1,5 245 19 69 144 1.5 2047 69 442.00025
SBM40 VA M40x1,5 288 19 83 165 1.5 2047 69 565.00010
ST Steel FT Hot-dip galvanised /100 pc.
Accessory part: 90bend for electrical installation pipes without threaded ends to EN 61386
(Code: 5557).
SB16 FT
Type
mm
Dimen-sion D
16
mm
Dimen-sion L
178
mm
Dimen-sion A
65
mm
Dimen-sion R
97
mm
Dimen-sion t
0.95
2047 48 5
Item No.
7.000
kg/100 pcs.
Weight
10
pcs
Pack.
SB20 FT 20 183 53 110 0.95 2047 48 69.40025
SB25 FT 25 207 59 123 1.05 2047 48 724.50025
SB32 FT 32 245 69 144 1.15 2047 48 841.50025
SB40 FT 40 288 83 165 1.25 2047 48 964.50010
SB50 FT 50 346 106 190 1.45 2047 49 0121.5005
SB63 FT 63 467 175 229 1.35 2047 49 1208.0005
V2A Stainless steel, 1.4301 /100 pc.
Accessory part: 90bend, stainless steel, for electrical installation pipes without threaded ends
to EN 61386 (Code: 5557).
SB16 VA
Type
mm
Dimen-sion D
16
mm
Dimen-sion L
178
mm
Dimen-sion A
65
mm
Dimen-sion R
97
mm
Dimen-sion t
1.5
2047 68 2
Item No.
10.900
kg/100 pcs.
Weight
10
pcs
Pack.
SB20 VA 20 183 53 110 1.5 2047 68 313.80025
SB25 VA 25 207 59 123 1.5 2047 68 419.50025
SB32 VA 32 245 69 165 1.5 2047 68 537.00025
SB40 VA 40 288 83 165 1.5 2047 68 654.60010
ST Steel FT Hot-dip galvanised /100 pc.
Accessory part: Pipe connection sleeve with thread to EN 61386 (Code: 5557) to connect elec-
trical installation pipes and 90bends.
SVM16 FT
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
32
mm
Dimen-sion D
18.1
mm
Dimen-sion t
1.55
2047 47 0
Item No.
2.500
kg/100 pcs.
Weight
50
pcs
Pack.
SVM20 FT M20x1,5 34 22.1 1.55 2047 47 13.50050
SVM25 FTM25x1,5
40
27.1
1.55 2047 47 24.50050
SVM32 FT M32x1,5 44 34.1 1.55 2047 47 35.50025
SVM40 FT M40x1,5 50 43.3 2.25 2047 47 418.00025
SVM50 FT M50x1,5 54 53.6 2.5 2047 47 528.00010
SVM63 FT M63x1,5 65 66.6 2.5 2047 47 632.0005
V2A Stainless steel, 1.4301 /100 pc.
Accessory part: Stainless steel pipe connection sleeve with thread to EN 61386 (Code: 5557) to
connect electrical installation pipes and 90bends.
SVM16 VA
Type
Dimen-sion M
M16x1,5
mm
Dimen-sion L
32
mm
Dimen-sion D
18.1
mm
Dimen-sion t
1.5
2047 67 3
Item No.
2.000
kg/100 pcs.
Weight
50
pcs
Pack.
SVM20 VA M20x1,5 40 27.1 1.5 2047 67 42.60050
SVM25 VA M25x1,5 40 27.1 1.5 2047 67 63.80050
SVM32 VA M32x1,5 44 33.1 1.5 2047 67 75.30025
SVM40 VA M40x1,5 50 43.3 1.5 2047 67 87.70025
Connection, fastening and cable routing systems
8/13/2019 Loesungen Schiffbau En
42/71
42 OBO LSB
12
LSB
Lsungskatalog
Schiffsbau_
International/en
/07/04/2010
(LLExport_
01016)
Always indicate the article number when ordering.
Connection,fasteningan
dcableroutingsystems
Steel armouredpipes
ST Steel FT Hot-dip galvanised /100 pc.
Accessory part: Pipe connection sleeve without thread to EN 61386 (Code: 5557) to connect
electrical installation pipes and 90bends.
SV16 FT
Type
mm
Dimen-sion D
18.6
mm
Dimen-sion L
50
mm
Dimen-sion t
1.05
2047 45 5
Item No.
2.200
kg/100 pcs.
Weight
50
pcs
Pack.
SV20 FT 22.6 54 1.05 2047 45 63.00050
SV25 FT 28.3 64 1.25 2047 45 73.20050
SV32 FT 35 74 1.25 2047 45 84.80025
SV40 FT
44
951.25 2047 45 915.00025
SV50 FT 54 110 1.55 2047 46 025.00010
SV63 FT 67 116 1.55 2047 46 129.5005
V2A Stainless steel, 1.4301 /100 pc.
Accessory part: Stainless steel pipe connection sleeve without thread to EN 61386 (Code:
5557) to connect electrical installation pipes and 90bends.
SV16 VA
Type
mm
Dimen-sion D
18.6
mm
Dimen-sion L
50
mm
Dimen-sion t
1.05
2047 66 5
Item No.
2.100
kg/100 pcs.
Weight
50
pcs
Pack.
SV20 VA 22.6 54 1.05 2047 66 62.80050
SV25 VA 28.3 64 1.25 2047 66 85.30050
SV32 VA 35 74 1.25 2047 66 99.20025
SV40 VA 44 95 1.25 2047 67 012.20025
Steel armoured pipe bush, plastic
PE Polyethylene /100 pc.
Cable protection connector for attachment to electrical installation pipes to DIN EN 60423 or
IEC 423 and other pipes of the same external diameters.
129 M16 SW
Type
Size
M16
Colour
Black
pcs
Boxqty.
1000
2047 93 4
Item No.
0.235
kg/100 pcs.
Weight
100
pcs
Pack.
129 M20 SW M20 Black 1200 2047 94 20.326100
129 M25 SW M25 Black 600 2047 95 00.61450
129 M32 SW M32 Black 600 2047 96 91.07050
129 M40 SW M40 Black 50 2047 97 71.44450
129 M50 SW M50 Black 25 2047 98 52.17625
129 M64 SW M63 Black 25 2047 99 32.80825
Profile rail
ST Steel FT Hot-dip galvanised /100 pc.
Static values:
A = 1,01cm
ly = 0,4418cm
lz = 1,8384cm
Wy = 0,423cm
Wz = 1,0505cm
Profile rail, perforated, slot width 16.5mm.
2068 L 200 FT
Type
Version
Perforated
Inter-face
FT
mm
Dimensionb x h
35 x 18
mm
Materialthickness
1.5
mm
Length
200
1119 69 6
Item No.
17.800
kg/100 pcs.
Weight
25
pcs
Pack.
2068 L 300 FT Perforated FT 35 x 18 1.5 300 1119 69 326.70025
2068 L 400 FT Perforated FT 35 x