Upload
prashant-mara
View
302
Download
20
Embed Size (px)
DESCRIPTION
ZTE LTE endoeb hardware sturcture
Citation preview
秘密▲
ZXSDR B8200 System Architecture
CL 产品支持部
秘密▲
Course Objects
After the course,you will : Know ZXSDR B8200’s Highlights Master Technical Specification Understand Physical Hardware Master Networking and Configuration Know the Maintenance Method
秘密▲
Contents
eNodeB Overview eNodeB Technical Specifications ZXSDR B8200 L200 Hardware Structure ZXSDR B8200 L200 Maintenance
秘密▲
Location in Network
秘密▲
Location in Network
秘密▲
ZTE Unified Radio Sub-System Platform
GSM/EDGE UMTS/HSPA TD-SCDMATD-SCDMA CDMA2000 WiMAX
ZTE Universal SDR Platform
LTEGSM/EDGEGSM/EDGE
UMTS/HSPAUMTS/HSPA
LTELTE
MicroTCA architecture Multi-Standard support Baseband sharing and software configurable RRU sharing and
software configurable
Features
Future-Proof Platform with Smooth Evolution Support
OneNetwork Target
Universal RRU
Distributed Integrated
BBU
RRURSU
BBU
秘密▲
LTE Product Portfolio
HSPA
ZTE SDR PRODUCTS ADAPT TO TECHNOLOGY DIVERSITIES
HSPA+ LTE
Multi-mode BBU Outdoor B8201
Multi-mode RRU R8880/R8882
Multi-mode eNB Outdoor BS8900
Multi-mode eNB Indoor BS8800
Femto eNB BS8210
Multi-mode BBU Indoor B8200
Soft Defined Radio2xMCPA, MIMO
2x40Watts TOC power, 35% power efficiency for LTE
All IP transmission, provides IP over E1/STM-1 interface
Unified O&M for simultaneous running RATs
TCO reduction comparing with traditional solution
INTEGRATED
BBU+RRU
秘密▲
LTE Base Station Family
Macro Indoor Base Station BS8800
Macro Outdoor Base Station BS8900
Indoor BBU B8200
Outdoor BBU B8201
RRU R8880/R8882
Pico BS8200Femto BS8210
秘密▲
SDR Benefits
秘密▲
ZXSDR B8200 Introduction
秘密▲
ZXSDR B8200 Highlights
秘密▲
ZXSDR B8200 Functionality
秘密▲
Contents
eNodeB Overview eNodeB Technical Specifications ZXSDR B8200 L200 Hardware Structure ZXSDR B8200 L200 Maintenance
秘密▲
Appearance
Color: Dark Blue Dimension: 88.4x482.6x197 mm (HxWxD) The weight of B8200 is less than 7.5Kg
秘密▲
Technical Specifications : Capacity
Configuration
BPL Qty.
LTE eNedeB Capacity
Number of User (RRC_CONNECTED)
Typical 1 BPL 3cell in 20MHz BW DL/UL: 200/75Mbps
1200
High performance
3 BPLs
6cell in 20MHz BWDL/UL: 600/225Mbps
3600
秘密▲
Technical Specifications : Interface
Item Interface Connector Type
BPL 3x2.5Gbps (MIMO 2*2)or 3x5.0Gbps (MIMO 4*4)
SFP (LC)
CC
3xGE/FE 2 RJ45 for Electrical and one SFP (LC) for optical
1xEXT RS 485 can be used to connect with other external receiver
1xGPS SMA
SA 8xE1/T1 DB44 (Optional)
FS 6x2.5Gbps (MIMO 2*2) SFP(LC)
秘密▲
Technical Specifications : Reliability
Item Value MTBF ≥233000 hours
MTTR 0.5 hours
Availability index ≥99.999785%
Down duration ≤1.128 min/year
秘密▲
Contents
eNodeB Overview eNodeB Technical Specifications ZXSDR B8200 L200 Hardware Structure ZXSDR B8200 L200 Maintenance
秘密▲
Hardware Structure
B8200
Radio UnitSA
CC
BPL
FS RRU
E1/T1/J1
GE
Clock
Data
Control Signaling
CPRI
Antenna
秘密▲
ZXSDR B8200 Hardware Structure
PM
SA CC
FS BPLSlot 14& 15
Slot 13
Slot 3 or 4
Slot 1 & 2
Slot 5 to 8FAMSlot 16
Slot Module Description1 to 2 CC Control & Clock module, O&M interface, 2 x GE/FE
3 or 4 FS Fabric Switch board, IQ data switch
5 to 8 BPL or Other BP Baseband Processing for LTE, or other BB boards in case of multi-mode
13 SA Site Alarm module, O&M processing, IP over 8 x E1/T1 interfaces
14 to 15 PM Power Module, dual backup, -48VDC
16 FAM Fan Module
秘密▲
CC : Control and Clock Board
秘密▲
CC : Control and Clock Module Interface :
Interface Description
ETH0 Ethernet interface for S1/X2, GE/FE compatible, electrical
ETH1 Ethernet interface for cascading, debugging or local maintenance,
GE/FE compatible, electrical
TX/RX S1/X2, GE/FE compatible, optical
(Eth0 and RX/TX are alternative at the same time)
EXT External communication port, connected to external receiver
Mainly 485, PP1S+/2M+ interfaces
REF External connection GPS antenna, SMA(F) interface
秘密▲
BPL : Baseband Processing for LTE
Interface Description
TX0 RX0 to TX2 RX2
3 pairs of 2.5Gbps (MIMO 2*2)/5.0Gbps (MIMO 4*4) CPRI optical interfaces, connected to RRU
秘密▲
FS : Fabric Switch Board
Interface Name Description
TX0 RX0 to TX5 RX5 6 pairs of 2.5Gbps (MIMO 2*2) CPRI optical interface, connected to RRU
秘密▲
SA : Site Alarm Module
Interface Description
8 RS485/232 Interface , that is ,
6+2 dry-contact interface(six
channel input and two-channel
bidirection)
秘密▲
PM : Power Module
Interface Description
MON Debugging interface, RS232 interface
-48V/-48VRTN -48V input
秘密▲
FM : Fan Module
Function : Fan speed auto-adjustment
according to the equipment
working temperature
Monitor, control and report of fan
state
秘密▲
Signalling Communication
BPL CC RRU
GE Fiber
秘密▲
Media Communication
CC-1 FSBPL
BPL
BPL
RRU
RRU
RRU
GE sRIO Fiber
秘密▲
Typical Configuration
SDR B8200 L200 can be typically configured with 1 BPL boards With typical configuration, B8200 can achieve:
3 x 20MHz cells supported Throughput: 200Mbps DL + 75Mbps UL (2x2 MIMO). Number of user (RRC_CONNECTED): 1200
Item Configuration Description
BPL 1 Baseband Processing for LTE
CC 1 Control and Clock board. In case only 1 CC is installed, CC can't support 1+1 redundancy
PM 1 Power Module
FA 1 Fan module
SA 1 Site Alarm board
秘密▲
Higher Performance configuration B8200 can support high performance LTE network with more BPL
boards. With higher performance configuration, B8200 can achieve:
6x20MHz cells in MIMO 2*2 or 3 x20MHz cells in MIMO 4*4 6 cells in MIMO 2*2: 3BPL boards, 600Mbps DL / 225Mbps UL 3 cells in MIMO 4*4: 3BPL boards, 600Mbps DL / 300Mbps UL
Number of user(RRC_CONNECTED): 3600
Item Configuration Description
FS 1 Fabric Switch board. It is needed if supporting BB pooling
BPL 3 Baseband Processing for LTE
CC 2 Support 1+1 redundancy
PM 2 Power Module, with 1+1 redundancy
FA 1 Fan module
SA 1 Site Alarm board
秘密▲
Networking
秘密▲
Contents
eNodeB Overview eNodeB Technical Specifications ZXSDR B8200 L200 Hardware Structure ZXSDR B8200 L200 Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
Operation And Maintenance
秘密▲
ZXSDR R8880 Device Principle
ZTE University
秘密▲
Course Objectives
After the course, you will : Be Familiar with LTE Networking Architecture Master System Architecture Know ZXSDR R8880’s Highlights Master Technical Specification Know the Maintenance Method
秘密▲
Contents
LTE Networking Architecture System Architecture System Highlights Technical Specifications Operation and Maintenance
秘密▲
Location in Network
MME / SGW MME / SGW
eNode B –Distributed SDR
eNode B –Distributed SDR
eNode B -Integrated SDR
E-UTRAN
EPC
S1
X2 X2
EPS
秘密▲
Networking
秘密▲
Contents
LTE Networking Architecture
System Architecture System Highlights Technical Specifications Operation and Maintenance
秘密▲
Physical Structure
Mechanical Dimension : 470 mm x 340 mm x 130 mm (H x W x D) Volume: 20.7 L Weight: 19.5 Kg Color: silver gray
秘密▲
External Interface
3 4 5 7 86
1
2
No Label Interface Interface type / connector
1 ANT2 Interface to transmit / receive RF signal
50 Ohm D-7/16 Connector
2 ANT1 Interface to transmit / receive RF signal
50 Ohm D-7/16 Connector
3 AISG/MON AISG device interface/485 Serial/4 dry contacts
Type D 25-cores socket
4 LMT Operation and Maintenance Interface/FE
8-cores socket (IEC 60130-9-ED)
5 CPI1 BBU and RRU Interfaces SFP (LC)
6 CPI2 BBU and RRU Interfaces SFP (LC)
7 RTE1/2 RF Testing Interface SMA
8 PWR Power interface
DC interface:Connector
XCG18T4K1P1-01+XC18FJJP1-10.5
Section area of cable is 1.5 mm2
秘密▲
Indicators StatusName Meaning Working mode Color
CPI2 Optical link indication A: Normal ON: optic fiber connection is normalB: Off: optic fiber is disconnected C: 5Hz flashing: this link is clock reference source,
and the phase-lock loop is in quick pull-in state.D: 0.25Hz flashing: this link is clock reference source,
and the phase-lock loop is in tracking state.
Green
CPI1 Optical link indication A: Normal ON: optic fiber connection is normalB: Off: optic fiber is disconnected C: 5Hz flashing: this link is clock reference source,
and the phase-lock loop is in quick pull-in state.D: 0.25Hz flashing: this link is clock reference source,
and the phase-lock loop is in tracking state.
Green
RUN Indicate Running A: Normal ON: R8880 is in reset and start stateB: 1Hz flashing: normal R8880 stateC: 5Hz flashing: version download processD: Off: indicates self-test failed
Green
VSWR2 RF working state indicator
A: Off: no alarmB: On: alarm
Green
VSWR1 RF working state indicator
A: Off: no alarmB: On: alarm
Green
ALM Alarm Indication A: Off: indicates no failure during running, or resetting/starting or downloading version
B: 5Hz flashing: major or urgent alarmC: 1Hz flashing: normal or minor alarm
Green
秘密▲
Hardware Structure
DFL (Duplex Filters LNA)
2xPA40 (Power Amplifier)
RPDC (RRU Power for DC)
DTR board (Dual-channel Transceiver)
PIB (Protect Interface Board)
PIB
DTR
RPDC DFL
Baseband-RF
PWR ALM
DC IN ANT1 ANT2
2
x PA40
PA Out
GND
LMT
AISG/MON
R8880
Baseband-RF
秘密▲
Software Structure
Hardware
BSP
OSS
VxWorks
OAM RFS
Hardware System
OS,Driver &Support
Application
秘密▲
Contents
LTE Networking Architecture System Architecture
System Highlights Technical Specifications Operation and Maintenance
秘密▲
Highlights
Zero Footprint, Easy Deployment Higher Efficiency, Lower TCO MIMO Supported, Better Performance Green Power
秘密▲
Functionality
Support the configuration of 5MHz/10MHz/15MHz/20MHz bandwidth
Multi-band support: 700MHz/900MHz/AWS/1800MHz/2100MHz/2600MHz
Supports 2*2 MIMO in one box which can optimize spectrum efficiency greatly compared to SISO
Support transmit power report function for every carrier Support overload protection function for power amplifier Support transmit channel switching on/off function
秘密▲
Contents
LTE Networking Architecture System Architecture System Highlights
Technical Specifications Operation and Maintenance
秘密▲
Technical Specifications: Performance
Item ValueOperation Frequency Band 700 MHz /900 MHz /AWS/1800 MHz /2100 MHz
/2600 MHz/DD
Output Power PA: 2 x 48 W
TOC : 2 x 40 W
Receiver Sensitivity •Channel bandwidth ( MHz ) : 1.4 •Reference sensitivity power level ( dBm ): -108.8•Channel bandwidth ( MHz ) : 3 •Reference sensitivity power level ( dBm ): -105.0 •Channel bandwidth ( MHz ) : 5/10/15/20 •Reference sensitivity power level ( dBm ): -103.5
秘密▲
Technical Specifications: Power
Item Value
Power Requirements Power supply : -48V DC (-37~-60V DC) grounding resistance : ≤ 5Ω
Power Consumption Typical power consumption: 200 W Maximum power consumption: 335 W
秘密▲
Technical Specifications: Working EnvironmentItem Indices
Temperature Long-term: -40 ~ +55 °C
Short-term: -45 ~ +65 °C
Relative Humidity Long-term: 5% ~ 100% ;Short-term: 5% ~ 100%
Waterproof/Dustproof IP65
Ground≤5 Ω; earth resistance can be less than 10 Ω in
thunder-less area where thunderstorm days is less than 20.
Storage
Indoor pack deposited
Temperature: -40 °C ~ 70 °C
Relative Humidity: 5% ~ 98%
秘密▲Technical Specifications: Electromagnetic Compatibility
Item Indices
Static Discharge Immunity Contact Discharge: ±6000 VAir Discharge: ±8000 V
Surge Impact Immunity DC Power port Line(Ground): ±2000 V
秘密▲
Technical Specifications: Reliability
Item IndicesMTBF ≥354000 hours
MTTR 0.5 hour
Availability index ≥99.999859%
Down duration ≤0.741 min/year
秘密▲
Contents
LTE Networking Architecture System Architecture System Highlights Technical Specifications
Operation and Maintenance
秘密▲
Operation And Maintenance
The operation and management of R8880 is performed by NetNumenTM M31 through BBU connected with it
The functions include performance management, fault management, configuration Management, testing &diagnosing, etc