MANUAL DE INSTRUCCIONES LICUADORA (1.5L)

ED-5053GL

ESTIMADO CLIENTE Con el fin de que obtenga el mayor desempeño de su producto, por favor lea este manual de instrucciones cuidadosamente antes de comenzar a utilizarlo, y guárdelo para su futura referencia. Si necesita soporte adicional, no dude en escribir a: info@premiermundo.com

P-1

ÍNDICE INSTRUCCIONES DE SEGURIDAD ......................................................................................................... 2  RECOMENDACIONES .............................................................................................................................. 2  DESCRIPCIÓN .......................................................................................................................................... 2  ENSAMBLAJE ........................................................................................................................................... 3  LIMPIEZA Y MANTENIMIENTO ................................................................................................................ 3  DIAGRAMA DE CIRCUITOS ..................................................................................................................... 3  

PRECAUCIÓN

RIESGO DE CHOQUE

ELÉCTRICO , NO ABRA

Precaución: Para reducir el riesgo de choque eléctrico, no retire la cubierta, no hay partes manipulables por el usuario al interior de la unidad. Refiera todo mantenimiento o intervención técnica a personal técnico calificado.

Este símbolo indica la existencia de voltaje peligroso al interior de esta unidad, que constituye un riesgo de choque eléctrico.

Este símbolo indica que hay importantes instrucciones de operación y mantenimiento en la literatura que acompaña a esta unidad.

LÍNEAS DE SERVICIO AL CLIENTE PREMIER Venezuela: 0800 – ELECTRIC (353-2874) Panamá: 300-5185 Sitio Web: www.premiermundo.com E-mail: servicioalcliente@premiermundo.com NOTA Nos reservamos el derecho de modificar las especificaciones, características y/u operación de este producto sin previo aviso, con el fin de continuar las mejoras y desarrollo del mismo.

P-2

INSTRUCCIONES DE SEGURIDAD • Este producto está diseñado para procesar alimentos para consumo humano. No lo utilice para

otros propósitos. • No deje la licuadora desatendida mientras la esté utilizando. Desconecte siempre el cable de poder

de la toma eléctrica cuando no la esté utilizando. • Mantenga el cable de poder y la licuadora lejos de superficies calientes. • No sumerja la base de la licuadora en agua u otros líquidos. • No utilice accesorios que no sean los recomendados por el fabricante. • Maneje las cuchillas con precaución ya que están muy afiladas. • No toque las partes móviles cuando esté utilizando la licuadora. Mantenga las manos y utensilios

lejos de las cuchillas en movimiento. • Antes de desarmar la licuadora, desconecte el cable de poder y asegúrese de que las cuchillas se

han detenido por completo. • No manipule el cable de poder con las manos mojadas. • Desconecte el cable de poder del enchufe y no del cable. • No utilice la licuadora si el cable de poder presenta alguna falla o la unidad misma. • No intente reparar la unidad usted mismo. Remita toda revisión, mantenimiento y reparación a

personal de servicio técnico calificado. RECOMENDACIONES • Se requiere estricta supervisión si se encuentra en niños cerca de la licuadora. • Para prevenir cortaduras, coloque siempre las cuchillas junto con la jarra. • Utilice siempre la licuadora con la tapa puesta. • Si está licuando líquidos calientes, retire la tapa pequeña en el centro de la tapa. • Recuerde que la licuadora está diseñada para uso en el hogar y no para uso industrial. • Para evitar una sobrecarga eléctrica, no utilice la licuadora junto con otro equipo de alto voltaje en el

mismo tomacorriente. • Evite utilizar extensiones eléctricas ya que pueden calentarse e incendiarse. DESCRIPCIÓN 1. Tapa pequeña 2. Tapa 3. Jarra 4. Empaque 5. Cuchillas 6. Base de las cuchillas 7. Carcasa del motor 8. Cable de poder

P-3

ENSAMBLAJE 1. Antes de utilizar la licuadora por primera vez, lave todas las partes a excepción de la carcasa del

motor con agua tibia y jabonosa. Enjuague y seque por completo. 2. Coloque la carcasa del motor sobre una superficie plana y estable. Luego coloque la base de las

cuchillas, junto con la jarra, y gire para ajustar. 3. Coloque la tapa sobre la jarra. 4. Después de colocar los ingredientes en la jarra, coloque la tapa. 5. Conecte el cable de poder. 6. Coloque el botón de la licuadora en la velocidad deseada (1 a 5), o en la posición "P", para función

de pulso. 7. Apague la licuadora colocando el botón en la posición 0, y desconecte el cable de poder. 8. Cuando las cuchillas se hayan detenido por completo, puede retirar la jarra del motor. PRECAUCIÓN • No utilice la licuadora si no está debidamente ensamblada. • Asegúrese de que el cable de poder está desconectado antes de agregar el líquido. • Lave todos los ingredientes sólidos y córtelos en pedazos pequeños. • Recuerde que la jarra tiene capacidad para 6 copas (48 onzas / 1.5 litros). No la tiene demasiado. • No utilice la licuadora para moler otros alimentos pesados. • No utilice la licuadora estando vacía. • No opere el motor por más de 3 minutos seguidos. • Permita que el motor se enfríe al menos 60 segundos antes de utilizarlo de nuevo. LIMPIEZA Y MANTENIMIENTO • Desconecte la licuadora antes de limpiarla. • Lave la licuadora inmediatamente después de cada uso. Lave todas las partes a excepción de la

carcasa del motor con agua jabonosa, luego enjuague y seque completamente. • Utilice un cepillo para limpiar las cuchillas y el empaque. • Guarde la licuadora en un lugar seco y limpio. DIAGRAMA DE CIRCUITOS Voltaje AC 220V/50Hz Potencia 500 Watts

P-4

• Las personas y/o Marcas registradas en este manual de instrucciones no están afiliadas a Premier Electric Japan Corp. y aparecen en

este Manual con propósitos ilustrativos únicamente.

Interruptor de interbloqueo

Interruptor giratorio

Protector del motor

INSTRUCTION MANUAL

BLENDER (1.5L) ED-5053GL

DEAR CUSTOMER In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference. If you need extra support, please write to info@premiermundo.com

P-1

CAUTION

RISK OF ELECTRIC SHOCK, DO NOT

OPEN

Caution: To reduce the risk of electric shock do not open this device, there are not serviceable parts for customers. Please refer any maintenance or repair to qualified personnel.

This sign means the existence of dangerous voltage at the inside of the unit, which states a risk of electric shock.

This sign means that there are important instructions of operation and handling in the manual that comes with this device.

PREMIER CUSTOMER SERVICE Venezuela: 0800 – ELECTRIC (353-2874) Panama: 300-5185 Website www.premiermundo.com E-mail: servicioalcliente@premiermundo.com NOTE This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

P-2

FOR HOUSEHOLD USE ONLY IMPORTANT

SAFEGUARDS

Signal Word Definitions DANGER – Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Usage of this signal word is limited to the most extreme situations. WARNING – Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION – Indicates a potentially hazardous situation, which, if not avoided, may result in minor/moderate injury or product/property damage. It also alerts against unsafe practices.

Always follow basic safety precautions when using electrical products, especially when children are present. WARNING: To avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before assembling, disassembling, relocating, servicing, or cleaning.

READ ALL INSTRUCTIONS BEFORE USE.

WARNING-- To reduce the risk of fire, electrical shock, or serious personal injury: 1. This product is intended for use in processing foods for human consumption. Do not use the product

for any other purpose. 2. Do not leave the product unattended while in use. Always unplug the product from the electrical

outlet when it is not in use. 3. Keep the Power Cord and product away from heated surfaces. 4. Do not place product base into water or other liquids. 5. Do not use attachments which are not recommended or sold by the product manufacturer. 6. Handle the Blades with care as they are extremely sharp. Use caution when attaching or detaching

the Blades. 7. Do not touch moving parts (e.g., the Blades) while the product is in use. Keep hands and utensils

away from the moving blades while operating the product. 8. Before disassembling the product, unplug it from the electrical outlet and ensure the Metal Shaft and

Blades have completely stopped. 9. Do not plug or unplug the product into/from the electrical outlet with a wet hand. 10. To disconnect from an electrical outlet, pull directly on the plug; do not pull on the Power Cord.

!!

P-3

11. Unplug the product from the electrical outlet prior to putting on or removing parts. 12. Never operate this product if it has a damaged Power Cord or plug, is not working properly, has been

dropped or damaged, or if the Base has been exposed to water or other liquids. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform servicing. Take the product to an appliance repair shop of your choice for inspection and repair.

CAUTION-- To reduce the risk of personal injury or product damage: 13. When using electrical appliances, basic safety precautions should always be followed including the

following. 14. Close supervision is necessary when any appliance is used by or near children. 15. To reduce the risk of injury,never place cutterd-assenbly blades on base without jar properly

attached. 16. Always operate blender with cover in place. 17. The use of attachments,including canning jars,not recommended by the manufacturer may cause a

risk of injury to persons. 18. When blending hot liquids,remove center piece of two-piece cover. 19. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons

or damage to the blender(another trade name may be used). A scraper may be used but must be used only when the blender is not running(does not apply to an acceptable scraper integral with the appliance).

20. Blades are sharp.Handle carefully. 21. Any other servicing should be performed by anthorized service representative. 22. This appliance has a polarized plug(one blade is wider than the other).To reduce the risk of electric

shock,this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,reverse the plug.If it still does not fit,contact a qualified electrician.Do not modify the plug in any way.

23. This product is intended for indoor,non-commercial,non-industrial,household use only.Do not use outdoors.

SPECIAL INSTRUCTIONS: To avoid a circuit overload when using this product, do not operate high. Wattage product on the

same electrical circuit. Avoid the use of an extension cord because the extension cord may overheat increasing the risk of

fire.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE PARTS DIAGRAM: 1. Cap 2. Lid 3. Jar 4. Gasket 5. Blade Assembly 6. Blade Base 7. Motor Housing 8. Power cord NOTE: Parts 3-6 are initially assembled in the packaging.

!!

P-4

To Assemble 1. Before using the product for the first time, wash all the parts except the Motor Housing in warm,

soapy water and then rinse and dry thoroughly. 2. Place the Motor Housing on a flat, stable surface, and then place the assembled Pitcher in the top

of the Motor Housing and turn counterclockwise until it is firmly in place. 3. Place the Lid with Cap onto the Pitcher.

To Use CAUTION: Do not operate the product until it is properly assembled. 1. Ensure the product is unplugged from the electrical outlet. 2. Pour the product is unplugged from the electrical outlet. 3. Wash all solid ingredients and cut them into pieces small enough to fit into the Cap. CAUTION: The Pitcher has a six cup (48 oz /1.5 liter) capacity. Do not over-fill it. CAUTION: Do not use the product for mashing or grinding heavy foods (e.g. , dough). 4. After filling the Pitcher with ingredients, Place the Lid with Cap securely onto the Pitcher. 5. Plug the product into a standard 220 volt AC electrical outlet. 6. Turn the Dial to the desired speed (1-5) or hold the Dial in the “P” position for Pulse. CAUTION: Never operate the product empty. CAUTION: Never operate the product’s motor for more than three minutes at a time. Allow the motor to cool for 60 seconds after three minutes of operation. NOTE: If the Blades are not operating smoothly, stop the product and add some liquid, or reduce the

contents in the pitcher. 7. Turn off the product by turning the Dial to the "0" position and then unplug the product from the electrical outlet. WARNING: Always unplug the product when it is not in use or will be left unattended. 8.When the Blades have stopped, the Pitcher can be removed from the Motor Housing. Care and Maintenance WARNING: Always ensure the product is unplugged from the electrical. Out before relocating, assembling, disassembling, or cleaning it . CAUTION: Before disassembling the product for cleaning, ensure the Blades have completely stopped and use caution when attaching or detaching them, as they are extremely sharp. Always clean the product immediately after each use. Wash all parts except the Motor Housing in

warm. Soapy water and then rinse and dry thoroughly. Never immerse the Motor Housing in water or other liquids or use abrasive cleaners. Do not place any parts into a dishwasher or extremely hot water.

To disassemble the pitcher for cleaning, turn the Blade Base counterclockwise and remove it, the Blades, and Gasket from the pitcher. Use a small brush (not included) to remove particles of food lodged underneath the blades.

Store the product in a cool, dry place.

P-5

CIRCUIT DIAGRAM

Electrical Ratings: AC220V 50Hz 500Watts