Upload
vankhuong
View
217
Download
1
Embed Size (px)
Citation preview
PRO/II 9.3.3/9.4/10.0
●Expected releases
Release Date
PRO/II 9.4 October 2015
PRO/II 9.3.3 October 2015 (defect fixes only)
PRO/II 9.4.1 Spring 2016 (defect fixes only)
PRO/II 10.0 Summer 2016
PRO/II 9.4 Features
●Ease of use˃ New Ribbon
˃ Tools accessible without mouse (ergonomic requirements)
˃ Unit operation Tooltips
˃ Toggle property list
˃ Property list selection for tooltip and display
˃ AutoSave
●Calculations˃ Double precision GUI
˃ Tighten default tolerances
˃ Migration flexibility
˃ Standard volumetric flow consistency
˃ Partial Import of UOM
●Component data˃ ChemApp (Thermochemistry third party program – Metals, mining)
˃ Solid Fuel Characterization (Ultimate/Proximate analysis)
˃ DIPPR 2015
˃ Update OLI engine to latest version
˃ OLI DBS File containerization
˃ Component Properties in one dialog box
●CAPE OPEN˃ Cape Open Component Properties
˃ Cape- Open Edit property package
PRO/II 9.4 Features
PRO/II 9.4 Features
●Unit operations˃ Rigorous HX - Support Phase Fraction Spec
˃ Entrainment specification additional basis (Mass & Volume)
˃ Allow thermal condition of bubble point or dew point for reference streams
˃ Gibbs Reactor - Support Approach temperature for Individual reactions
˃ Stop a column in the middle of the run
●UAS˃ UAS parameters accessible for controllers, MVC, case study.
˃ Provide Unit operation table for UAS
˃ Additional variables in UAS
˃ Data entry in UAS improved with Combo box capabilities
˃ Improve GUI for UAUOP
PRO/II 9.4 Features
●Reporting˃ Simulation comparison tool
˃ Water Free composition report
˃ Automated report of critical properties on heat exchanger automated heat curves
˃ Mass balance in Message Window and Tools/Spreadsheet
˃ Line size
˃ Vessel size
Ribbon User Interface
●PRO/II 9.4. has a more Microsoft Office look
●Express tab has tools used in 75%+ of simulation work
● It auto resizes
Keyboard Shortcuts
● In addition to the new ribbon bar, use keyboard shortcuts to access functions
●Press Alt, then the letter of the tab you want to go (even if you are there)
●Press the letter of the command you want to invoke
Double Precision/Display Precision
●Up to 14 significant digits are stored with the option to change
Global Tolerances
● In version 9.4 global default tolerances have been tightened, user has option to revert to older looser tolerances or to set his own defaults.
●Choose Global Tolerances…
from the Simulation Defaults
dropdown
Global Tolerances when Migrating Files
●You have the option to select simulation tolerances when migrating old files to 9.4
Select Default UOM During Installation
●During installation, V9.4 provides the option to set the default units of measurement for PRO/II
Version Migration
●When migrating files, extra precision may change inputs that were once rounded
●Use Schema migration to keep data from previous version database
– Input values may slightly differ but all significant digits are preserved
●Use Keyword migration to recalculate the database with input values
– May truncate significant digits entered by user
– Also cleans database from potential memory issues
– It is important to update the estimates before migrating
Metric Standard English Standard
●Changing from one to another can yield molar differences
●Note: New precision for standard
pressure and gauge pressure
Standard Volumetric Flow
Tooltips for Streams and Unit ops
●Equivalent/consistent behavior than previous tooltips for streams
●Be aware that not all the properties are calculated by default
Toggle Property List
●Previously existing for Streams, it now works for Unit operations too
●Not aesthetic but functional
Units of Measurement (UOM)
●V9.4 allows you to import units of measurement when importing components and thermodynamic data from an external flowsheet or input file
AutoSave Improvement
SAVING TOO OFTEN MAY
CAUSE SLOW PERIODS OF
TIMES WHILE SAVING!
●AutoSave allows you to recover simulations from a crash (similar to Excel & Word)
●Former issue: If you have a corrupted file and it is autosaved, it crashes.
When you try to reopen the corrupted saved file, it crashes again.
●Solution: Multiple layers of file saving; user selectable saving directory
●PRO/II 9.4 provides solid fuel characterization through the Ultimate Analysis option on the Tools menu
●Fuel Properties
●Ultimate Analysis
●Proximate Analysis
●Fuel Type– Coal – Biomass– Municipal Solid
Waste– Estimate from
Proximate Analysis Report
– User Input
Solid Fuel Characterization
Note: You should use a conversion reactor to
convert all coal to gas and then use a Gibbs
Reactor to account for incomplete oxidation
and formation of NOx byproducts
Additional Solid Fuel Tool Features
●Solid Fuel Tool creates names for components and reactions
●You can add multiple coal components; just give different names
Component Properties
●Component Properties in one dialog box instead of five
●All fixed component properties in one scrollable dialog box makes it easier to copy/paste to/from Excel
Reference Stream Thermal Conditions> New thermal conditions of bubble point or dew point for
reference streams
Heat Exchanger Liquid Fraction Spec
●The Rigorous heat exchanger provides two new specifications for Liquid Fraction on the Tube and Shell outlets
Flash Drum Entrainment
●In addition to the options available in v9.3 (mole fraction, mole percent, rate), PRO/II 9.4 provides these options:
●Weight fraction
●Weight percent
●Actual volume fraction
●Actual volume percent
●Actual volume