Cerrar SIS
Pantalla anterior
Producto: NO SE HA ESCOGIDO NINGUN EQUIPO
Modelo: NO SE HA ESCOGIDO NINGUN EQUIPO
Configuracin: NO SE HA ESCOGIDO NINGUN EQUIPO
Localizacin y Solucin de Problemas D8T, D9T, D10T y D11T
Tractores de cadenas
Nmero de medio -RSNR8056-08 Fecha de publicacin -01/07/2011
Fecha de actualizacin -10/07/2012
i03138757
MID 082 - CID 0296 - FMI 12SMCS - 7610-038-DTN
Conditions Which Generate This Code:
Illustration 1 g01137597
Schematic of the Cat Data Link
This diagnostic code is recorded when the implement ECM does not
receive enough parameters from the power train ECM through the Cat
Data Link.
The Cat Data Link is an input and an output of all electronic
control modules. The data link is designed to carry communications
between all electronic control modules. The data link is not a
visible component. The data link consists of internal control
circuits and the connecting wire harness.
Pgina 1 de 2Bsqueda avanzada de texto completo - RENR8056 - D8T,
D9T, D10T y D11T Tractor...
18/09/2012https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
A possible cause of this diagnostic code is:
The power train ECM is operating intermittently.
System Response:
A level 2 warning is generated. The AUTO Blade Assist features
are disabled. ABA includes the following features: AUTO spread,
AUTO return and AUTO pitch.
Test Step 1. VERIFY THE SOFTWARE PART NUMBERS.
Verify whether the software part numbers for the power train ECM
and the implement ECM are correct.
A.
Expected Result:
Consult the Business Unit that is producing the product for the
correct configuration for the machine.
Results:
OK - All part numbers are correct. Stop.
NOT OK - The software part numbers are NOT correct.
Repair: Install the correct software. If any modules have been
replaced, ensure that the correct part number was used.
Stop.
Copyright 1993 - 2012 Caterpillar Inc.
Todos los derechos reservados.
Red privada para licenciados del SIS.
Tue Sep 18 12:15:34 EST 2012
Pgina 2 de 2Bsqueda avanzada de texto completo - RENR8056 - D8T,
D9T, D10T y D11T Tractor...
18/09/2012https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
