Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
To Train and Educate Today for the Needs of Tomorrow
TRAI
NING
CO
URSE
S
MITUTOYO VIETNAM CO., LTD.
TRAINING INSTITUTE
Course Type Duration Trainee
Proper usage of Small Tool Instruments / Hướng dẫn sử dụng và bảo quản các thiết bị đo cầm tay
• Check points for Small Tool Instruments before use, during use and after use Các tiêu chí cần kiểm tra các dụng cụ đo cầm tay trước khi sử dụng, trong quá trình sử dụng
và sau khi sử dụng
1 Day 1 to 10
Standard Training Contents (*)
1. Structure and parts of the machine 1. Cấu trúc và các bộ phận của máy
2. Basic operation and maintenance 2. Vận hành và bảo dưỡng cơ bản
3. Software interfaces and measuring tools 3. Giao diện phần mềm và công cụ đo
4. Setting up measuring instruments (needles, lens and etc...) 4. Tháo lắp dụng cụ đo (kim, lens etc…)
5. Customize measuring conditions 5. Thiết đặt điều kiện đo
6. Creating Part Program 6. Tạo chương trình đo
7. Get measurement data 7. Lấy dữ liệu đo
8. Calibrating Measuring Instruments (**) 8. Hiệu chuẩn dụng cụ đo (**)
9. Practicing 9. Thực hành
10. Reviewing 10. Đánh giá
Metrology Tools and Metrology Training CourseCác khóa đào tạo về dụng cụ đo và máy đo.
Advanced training for using metrology tools and metrology machines.Đào tạo về việc sử dụng các công cụ đo và máy đo lường
Why do you need training? / Tại sao chúng ta cần đào tạo?
Training on the use of detailed tools and metrologyĐào tạo về việc sử dụng các công cụ và đo lường chi tiết
1/ New product model / Sản phẩm mới
2/ Job rotation work for staff / Nhân viên luân chuyển công tác
3/ Advanced measuring drawing / Đọc hiểu bản vẽ đo lường
4/ Improve skills and knowledge / Nâng cao kỹ năng
(*) Each machine training contents may be diferent compared to the standard contents(*) Nội dung đào tạo của từng máy có thể thay đổi so với nội dung tiêu chuẩn
(**) Section 8 only available for machines with calibration kit(**) Mục số 8 chỉ dành cho các máy có kèm dụng cụ hiệu chuẩn
Training courses with certificates of completion
Visit our Mitutoyo website now for the latest training schedule of all software and metrology courses
Course Type Duration Trainee
MCOSMOS-1 (GEOPAK) 4 Days 1 to 5
MCOSMOS-2 (GEOPAK, CAT1000P, CAT1000S) 6 Days 1 to 5
MCOSMOS-3 (GEOPAK, CAT1000P, CAT1000S, SCANPAK) 7 Days 1 to 5
CAT1000P only 1 Day 1 to 5
CAT1000S only 1 Day 1 to 5
SCANPAK only 1 Day 1 to 5
CMM Product Software Training Course
Vision Product Software Training Course
Course Type Duration Trainee
QVPAK 2 Days 1 to 5
QSPAK 2 Days 1 to 5
Course Type Duration Trainee
QM DATA 200 1 Day 1 to 5
QSPAK 2 Days 1 to 5
Course Type Duration Trainee
ROUNDPAK 2 Days 1 to 5
FORMTRACEPAK • SURFTEST (SV)• FORMTRACER (SV-C)• FORMTRACE EXTREME (CS)• CONTRACER (CV)
2 Days3 Days 3 Days2 Days
1 to 5
Form Product Software Training Course
Optical Product Software Training Course
Coordinate Measuring Machines
Sensor Systems
Vision Measuring Systems
Test Equipmentand Seismometers
Form Measurement
Digital Scale and DRO Systems
Optical Measuring
Small Tool Instrumentsand Data Management
We offer various metrology training courses, ranging from the Fundamentals of Precision Measurement to Co-ordinate Measuring Machine software. The courses are led by our industrial experienced, highly skilled trainers. Course contents are based on years of experience in offering solutions, advice and educational support to the industries in Dimensional Metrology Field.
Each training course is designed to equip trainees with theoretical knowledge, as well as extensive practical 'hands on' experience gained from our latest and comprehensive range of Mitutoyo equipment.
If you have any special requirements, just let us know, and we will customize a course to suit your needs. Special arrangements can be made for the training to be held in your own premises.
All trainees who successfully complete the course, will each receive a certificate that reflects the high standard of achievement obtained.
Hanoi OfficeMr. Cong Assistant ManagerTel: 0931705752E-mail: [email protected]
Ms.Thao Trainer EngineerTel: 0931705967Email: [email protected]
Ho Chi Minh City BranchMr. Duy Assisstant ManagerTel: 0931705985E-mail: [email protected]
Mitutoyo Vietnam Co., Ltd.1st & 2nd Floor, MHDI Building, No. 60 Hoang Quoc Viet Road, Nghia Do Ward, Cau Giay District, Hanoi, VietnamTel: (84) 24-3768 8963Fax: (84) 24-3768 8960E-mail: [email protected]
Ho Chi Minh City Branch123 Dien Bien Phu Street, Ward 15, Binh Thanh District, Ho Chi Minh City, VietnamTel: (84) 28-3840 3489Fax: (84) 28-3840 3498E-mail: [email protected]
www.mitutoyo.com.vnVietnam
Contact our Trainer for more details:
Follow us on social mediaMitutoyo Asia Pacific