2
Haas Door’s MISER-THERM commercial insulated sectional doors have the strength of steel construction — combined with the energy efficiency of a polyurethane core. M I S E R - T H E R M C o m m er cia l I ns ula te d S te el Do or s M od e l s C MT -610 , CM T-6 16, CM T-68 0, a nd CM T -69 0 1-3/8” Thick CFC-Free, Foam-Injected Polyurethane Core

Models CMT-610, CMT-616, CMT-680, and CMT-690stcroixgaragedoors.com/pdfs/hass_cmt_600.pdf · Haas Door’s MISER-THERM™ commercial insulated sectional doors have the strength of

  • Upload
    vuminh

  • View
    282

  • Download
    1

Embed Size (px)

Citation preview

Page 1: Models CMT-610, CMT-616, CMT-680, and CMT-690stcroixgaragedoors.com/pdfs/hass_cmt_600.pdf · Haas Door’s MISER-THERM™ commercial insulated sectional doors have the strength of

Haas Door’s MISER-THERM™ commercialinsulated sectional doors have the strength of steel construction — combined with theenergy efficiency of a polyurethane core.

MISER-THERMCommercial Insulated Steel DoorsModels CMT-610, CMT-616, CMT-680, and CMT-690

1-3/8” Thick CFC-Free,

Foam-InjectedPolyurethane

Core

20354.qxd:15068.qxd 9/7/07 11:57 AM Page 1

creo
Page 2: Models CMT-610, CMT-616, CMT-680, and CMT-690stcroixgaragedoors.com/pdfs/hass_cmt_600.pdf · Haas Door’s MISER-THERM™ commercial insulated sectional doors have the strength of

MISER-THERM™

Energy EfficiencyThese 1-3/8”-thick doors have a

calculated R-Value of 13.45. MISER-THERM™ doors use rigid vinyl extru-sions with positive thermal breaks toeliminate metal-to-metal contact, whichlimits temperature transfer. Tongue-and-groove construction and sectionjoint seals at meeting rails provide waterand wind resistance.

A full-length, one-piece vinyl astragalretainer and flexible vinyl U-shapedweatherstrip prevent infiltration of air,rain, snow, and debris. The seal fits toirregular or unlevel floors and reducesimpact shocks when the door is closedagainst concrete flooring.

Exceptional StrengthMISER-THERM™ doors are built

strong. High-density CFC-free polyure-thane foam expands and adheres to the interior and exterior steel panels to provide a rigid unitized structure.

C O M M E R C I A L I N S U L A T E D S T E E L D O O R S

Our doors are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meetwindload specifications and to complywith ANSI A216.1 and NAGDM 102-1988.

Unique Paint SystemOur three-tier, corrosion-resistant

protective paint system is designed toresist even the most hostile weather conditions. The protective layers foundon both the interior and exterior are:

1 Injected polyurethane foam

2 Steel3 Galvanizing4 Epoxy primer5 Polyester finish coat

Hard-Working HardwareThe track is 2 or 3” galvanized steel,

depending on door size, with bracketmount for wood jambs or continuousreverse mounting for steel jambs. For

angle-mount track, door widths are 2”wider than opening. Track rollers are 2or 3” case-hardened inner and outersteel races with 10-ball, prelubricatedbearings. Hinges, brackets, and rein-forced struts are hot-dipped galvanizedsteel, and fasteners are plated for maxi-mum corrosion resistance.

Counterbalancing springs are torsiontype, computer calibrated to matchdoor load. This provides a 10,000 cyclelife at the minimum; optional springwires can achieve 25,000, 50,000, and100,000 cycle requirements. Springs arewound from oil-tempered wire andmounted on a continuous cross headertube or solid shaft, as determined bytorque load.

You can contact Haas Door or one ofour professional dealers for informationon additional options, including exteri-or cylinder locks, chain hoist operation,safety bottom brackets, and special liftclearance tracks (high lift, vertical lift,low headroom, and those that followthe roof line).

MISER-THERM™

CMT-610MISER-THERM™

CMT-616MISER-THERM™

CMT-690MISER-THERM™

CMT-680

Window Options

Double-Wall 1/2” Tempered Glass

Your Professional Haas Door Dealer:

Quick Reference ChartExterior Interior Exterior Interior Calculated Steel

Model Design Design Thickness Gauge Gauge U-Value R-Value Prefinished End Stiles

CMT-610 Flush Grooved 1-3/8” 26 26 .074 13.45 White/Brown/ Optionalwood-grain wood-grain Almond/

texture texture Sandstone

CMT-616 Grooved Grooved 1-3/8” 26 26 .074 13.45 White/Brown/ Standard wood-grain wood-grain Almond/

texture texture Sandstone

Optional exterior designs of CMT-610 include CMT-680 with an embossed wood-grain texture and CMT-690 with a sculptured wood-grain texture

Strong, Efficient, and AttractiveWhen your major considerations include maximum energy efficiency, sound

transmission, and aesthetics, Haas Door’s MISER-THERM™ commercial insulatedsteel doors will far exceed your expectations. These CFC-free, polyurethane-foam-injected steel doors offer exceptional benefits for commercial applications.

U-Shaped Astragal

Tongue-and-Groove Construction

Thermal Break

Section Joint Seal

PolyurethaneInsulation

20-GaugeInterior Platefor HingeAttachment

1245 3

20354.qxd:15068.qxd 9/7/07 11:57 AM Page 2

320 SycamoreWauseon, OH 43567

www.haasdoor.com

creo