Embed Size (px)
Citation preview
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Mormont Mortise Knob by Knob, Lever by Lever Entry Sets
MormontPart# 3545
Inside Trim
8-15/16” 10-1/4”
2-1/2”2-1/2”
3-9/16”
4-7/16”
3-11/32”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
ArtemisPart# 3544
Artemis Mortise Knob by Knob, Lever by Lever Entry Sets
Inside Trim
8-15/16” 10-1/4”
2-1/2”2-1/2”
3-3/8”
4-1/2”
3-7/16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Harrison Mortise Knob by Knob, Lever by Lever Entry Sets
HarrisonPart# 3551
Inside Trim
10”
2-11/16”
10”
3-5/16”
4-7/16”
2-11/16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Charleston Mortise Knob by Knob, Lever by Lever Entry Sets
CharlestonPart# 3543
Inside Trim
3-7/16”
3-5/16”
4-3/16”
9-3/4”
2-13/16”2-13/16”
9-3/4”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Hamilton Mortise Knob by Knob, Lever by Lever Entry Sets
HamiltonPart# 3504
Inside Trim
3-7/16”
3-37/64”
3-29/32”
9-3/4”
2-13/16”2-13/16”
9-3/4”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Manhattan Mortise Knob by Knob, Lever by Lever Entry Sets
ManhattanPart# 3506
Inside Trim
3-11/32”
3-37/64”
4-11/64”
10” 10”
2-45/64”2-45/64”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Memphis Mortise Knob by Knob, Lever by Lever Entry Sets
MemphisPart# 3502
Inside Trim
3-11/32”
3-3/4”
4”
10” 10”
3”3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Oval Ribbon & Reed Mortise Knob by Knob, Lever by Lever Entry Sets
Oval Ribbon & ReedPart# 3542
Inside Trim
3-7/16”
3-15/16”
4-1/8”
10-19/64” 10-19/64”
3-19/64”3-19/64”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Valley Forge Mortise Knob by Knob, Lever by Lever Entry Sets
Valley ForgePart# 3541
Inside Trim
3-7/16” 11-1/4” 11-1/4”
3-1/2”
5-3/8”
2-13/16”2-13/16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Regency Mortise Knob by Knob, Lever by Lever Entry Sets
RegencyPart# 3507
Inside Trim
4-7/8”
5-1/16”
3-5/32” 12-3/16” 12-3/16”
3”3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate
Door Thickness Specifications
Outside Trim
Craftman Mortise Knob by Knob, Lever by Lever Entry Sets
CraftmanPart# 3508
Inside Trim
4-7/16”
4-9/16”
3-7/16”
11” 11”
3” 3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Hailey Mortise Knob by Knob, Lever by Lever Entry Sets
HaileyPart# 3534
Inside Trim
3-7/16”10”
2-13/16” 2-13/16”
3-7/16”
4-5/16”
10”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Cheyenne Mortise Knob by Knob, Lever by Lever Entry Sets
CheyennePart# 3521
Inside Trim
3-1/2”
3-5/8”
3-7/16”
9-1/2” 9-1/2”
2-13/16” 2-13/16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Rectangular Mortise Knob by Knob, Lever by Lever Entry Sets
RectangularPart# 3525
Inside Trim
3-7/16”
4-5/16”
3-7/16”
10” 10”
2-13/16” 2-13/16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Octagon Mortise Knob by Knob, Lever by Lever Entry Sets
OctagonPart# 3533
Inside Trim
3-7/8”
4-3/8”
3-7/16” 10-1/2” 10-1/2”
3” 3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Da Vinci Mortise Knob by Knob, Lever by Lever Entry Sets
Da VinciPart# 3531
Inside Trim
3-7/16”
4-7/16”
3-7/16”
10” 10”
3” 3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Art Nouveau Mortise Knob by Knob, Lever by Lever Entry Sets
Art NouveauPart# 3532
Inside Trim
3-5/8”
3-7/8”
3-7/16”
11” 11”
3” 3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Door Thickness Specifications
Standard Door Thickness:1 3⁄4” Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4” Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Strikeplate
Extended Door Thickness: 2 3/8”- 2 5/8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Strikeplate• 2 3⁄4” TD Requires 2” Threaded Cylinder
Outside Trim
Wrought Steel Mortise Knob by Knob, Lever by Lever Entry Sets
Wrought SteelPart# 3511
Inside Trim
3-5/8”
3-3/4”
9-5/8”9-5/8”
2-5/16”2-5/16”
3-7/16”
