55
MX SOUND Setup Guide | 设置指南 | 設定指南 | 설치 가이드

MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

MX SOUNDSetup Guide | 设置指南 | 設定指南 | 설치 가이드

Page 2: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

2

English 3

简体中文 16

繁體中文 29

한국어 42

Page 3: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 3

WHAT’S IN THE BOX

1. Two MX Sound speakers2. Power cable3. One 3 5mm cable

Page 4: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

4 English

12

CONTROLS

Touch controls with LED1. Bluetooth® (white LED)2. Volume (white LED)

Page 5: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 5

1 2 3 4 5

PC

CONNECTORS

1. Audio output: 3 5mm headphone jack

2. Power3. Link to left speaker: RCA4. Audio input: 3 5mm jack5. Audio input: 3 5mm jack

Page 6: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

6 English

PC

AUX

PC

CONNECTIVITY

Page 7: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 7

RPC

POWER

MX Sound does not have a power button It is powered on when it is plugged into a power source After 20 minutes with no audio playing, speakers enter a standby mode to save power

Page 8: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

8 English

STANDBY

If no movement is detected in front of touch controls for 5 seconds, LED lights enter standby mode

Page 9: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 9

3 inches

WAKE UP - LED CONTROLS

1. When LED lights are not lit up they are in standby mode

2. To wake up or activate lights, wave your hand in front of the right speaker up to 3 inches/70mm away

3. Bluetooth® pairing button and volume control LEDs will appear

Page 10: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

10 English

BLUETOOTH® PAIRING

1. Lightly press the LED Bluetooth® icon to put MX Sound into pairing mode

2. Bluetooth icon will blink fast for approximately 3 minutes while searching for your Bluetooth device

3. Select Logi MX Sound as the Bluetooth device 4. An audio cue will confirm that pairing

was successful

Page 11: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 11

1 2 1 2 1 21 2

1 2 3 4

Bluetooth Bluetooth

LogitechMX Sound

Connected

LogitechMX Sound

Connected

SWITCHING BETWEEN BLUETOOTH®DEVICES

1. Make sure that your two devices are connected to Logi MX Sound following step 1 to 4 of the Bluetooth pairing on previous page In case you were disconnected, please check your Bluetooth device list, select Logi MX Sound and reconnect

2. Play audio on device 1 3. Pause audio on device 1 4. Play audio on device 2, the audio will switch automatically and will stream

from device 2 It may take a few seconds to switch between devices

Page 12: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

12 English

BLUETOOTH® RECONNECT

1. Double click the Bluetooth icon 2. An audio cue will confirm that MX Sound

is in reconnect mode 3. MX sound will reconnect with last connected

device

Page 13: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 13

1 2 1 2 1 21 2

1 2 3 4

Bluetooth

LogitechMX Sound

Connected

ConnectedLogitechMX Sound

SWITCHING BETWEEN MULTIPLE DEVICES

1. Make sure that your devices are connected to Logi MX Sound either via Bluetooth® or the 3 5mm input

2. Play audio on device 1 3. Pause audio on device 1 4. Play audio on device 2, the audio will switch automatically and will stream

from device 2 It may take a few seconds to switch between devices

Page 14: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

14 English

VOLUME TONE

1. When pressing the volume button up or down you will hear a sound notification

2. When holding the volume button up or down you will not hear a sound notification

3. When MX Sound reaches maximum or minimum volume you will hear a sound notification

Page 15: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

English 15

PC

HEADPHONE VOLUME

The volume of the headphones can be adjusted through the volume up/down buttons on the front of the speaker without affecting the speaker volume

Page 16: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

16 简体中文

包装内容

1. 两个 MX Sound 音箱

2. 电源线

3. 一条 3 5 毫米线缆

Page 17: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 17

12

控制键

LED 触控键1. 蓝牙™(白色 LED)

2. 音量(白色 LED)

Page 18: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

18 简体中文

1 2 3 4 5

PC

连接器

1. 音频输出:3 5 毫米耳机插孔

2. 电源

3. 连接至左音箱:RCA4. 音频输入:3 5 毫米插孔

5. 音频输入:3 5 毫米插孔

Page 19: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 19

PC

AUX

PC

连接

Page 20: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

20 简体中文

RPC

电源

MX Sound 没有电源按钮。 将其插入电源,则自动开启。 为省电,无音频播放 20 分钟后,音箱进入待机模式。

Page 21: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 21

待机

若在触控键前未检测到移动,5 秒后 LED 灯将进入待机模式。

Page 22: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

22 简体中文

3 inches

唤醒 - LED 控制键

1. LED 未点亮时,则处于待机模式。

2. 若要唤醒或激活灯,请在右侧音箱前挥手,最大距离可达 3 英寸/70 毫米。

3. 将显示蓝牙™ 配对按钮与音量控制 LED

Page 23: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 23

蓝牙™ 配对

1. 轻按 LED 蓝牙™ 图标将 MX Sound 置于配对模式。

2. 搜索您的蓝牙设备时,蓝牙图标将快速闪烁约 3 秒。

3. 选择 Logi MX Sound 作为蓝牙设备。

4. 音频指示将确认配对成功。

Page 24: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

24 简体中文

1 2 1 2 1 21 2

1 2 3 4

Bluetooth Bluetooth

LogitechMX Sound

Connected

LogitechMX Sound

Connected

在蓝牙™设备间切换

1. 请按照上一页中蓝牙配对步骤 1 至 4 确保您的两台设备均已连接至 Logi MX Sound。 如果您断开连接,请检查您的蓝牙设备列表,选择 Logi MX Sound 并重新连接。

2. 在设备 1 上播放音频。

3. 在设备 1 上暂停音频。

4. 在设备 2 上播放音频,将自动切换音频,从设备 2 播放。 可能需要几秒在设备间切换。

Page 25: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 25

蓝牙™ 重新连接

1. 双击蓝牙图标。

2. 音频指示将确认 MX Sound 处于重新连接模式。

3. MX sound 将重新连接最后连接的设备。

Page 26: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

26 简体中文

1 2 1 2 1 21 2

1 2 3 4

Bluetooth

LogitechMX Sound

Connected

ConnectedLogitechMX Sound

在多个设备间切换

1. 请确保您的设备已通过蓝牙™ 或 3 5 毫米输入连接至 Logi MX Sound。

2. 在设备 1 上播放音频。

3. 在设备 1 上暂停音频。

4. 在设备 2 上播放音频,将自动切换音频,从设备 2 播放。 可能需要几秒在设备间切换。

Page 27: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

简体中文 27

音量调节

1. 当按下音量升高或降低按钮时,将听到声音提示。

2. 当按住音量升高或降低按钮时,将不会听到声音提示。 3. 当 MX Sound 达最大或最小音量时,将听到声音提示。

Page 28: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

28 简体中文

PC

耳机音量

可通过音箱前的音量升高/降低按钮调节耳机音量,且不会影响音箱音量。

Page 29: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 29

包裝內容

1. 兩個 MX Sound 音箱

2. 電源線

3. 一條 3 5 公釐連接線

Page 30: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

30 繁體中文

12

控制

透過 LED 指示燈的觸控方式1. 藍牙 (白色 LED 指示燈)2. 音量 (白色 LED 指示燈)

Page 31: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 31

1 2 3 4 5

PC

接頭

1. 音訊輸出:3 5 公釐耳機插孔

2. 電源

3. 連結到左音箱:RCA4. 音訊輸入:3 5 公釐插孔

5. 音訊輸入:3 5 公釐插孔

Page 32: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

32 繁體中文

PC

AUX

PC

連線

Page 33: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 33

RPC

電源

MX Sound 沒有電源按鈕。 在插入到電源時就會通電。 經過 20 分鐘沒有音訊播放後,音箱會進入待命模式以節省電力。

Page 34: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

34 繁體中文

待命

如果前方觸控裝置 5 秒鐘沒有偵測到任何動作,LED 指示燈會進入待命模式。

Page 35: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 35

3 inches

喚醒 - LED 控制

1. 在待命模式中,LED 指示燈不會亮起。

2. 若要喚醒或啟動指示燈,請在右音箱前方約 70 公釐/3 英吋的距離揮動您的手部。

3. 即會出現藍牙配對按鈕與音量控制 LED 指示燈。

Page 36: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

36 繁體中文

藍牙配對

1. 輕輕按一下 LED 藍牙圖示可讓 MX Sound 進入配對模式。

2. 在搜尋藍牙裝置期間,藍牙圖示會快速閃爍約 3 分鐘。

3. 選擇 Logi MX Sound 作為藍牙裝置。

4. 會發出音訊確認音確認配對成功完成。

Page 37: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 37

1 2 1 2 1 21 2

1 2 3 4

Bluetooth Bluetooth

LogitechMX Sound

Connected

LogitechMX Sound

Connected

切換藍牙裝置

1. 確認已遵循之前頁面的藍牙配對 1 到 4 步驟,將兩個裝置連線到 Logi MX Sound。 如果您已中斷連線,請查看您的藍牙裝置清單,選擇 Logi MX Sound 並重新連線。

2. 播放裝置 1 的音訊。

3. 暫停裝置 1 的音訊。

4. 播放裝置 2 的音訊,即會自動切換並串流播放裝置 2 的音訊。 在裝置間切換可能需花幾秒鐘時間。

Page 38: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

38 繁體中文

藍藍重新連線

1. 按兩下藍牙圖示。

2. 會發出音訊確認音確認 MX Sound 進入重新連線模式。

3. MX Sound 會重新連線到上次連線的裝置。

Page 39: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 39

1 2 1 2 1 21 2

1 2 3 4

Bluetooth

LogitechMX Sound

Connected

ConnectedLogitechMX Sound

切換多個裝置

1. 確認您的裝置已透過藍牙或 3 5 公釐輸入埠,連接到 Logi MX Sound。2. 播放裝置 1 的音訊。

3. 暫停裝置 1 的音訊。

4. 播放裝置 2 的音訊,即會自動切換並串流播放裝置 2 的音訊。 在裝置間切換可能需花幾秒鐘時間。

Page 40: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

40 繁體中文

音量提示音

1. 按下音量按鈕增加或減少音量時,您會聽到音效通知。

2. 按著音量按鈕不放以增加或減少音量時,您不會聽到音效通知。

3. MX Sound 到達最大或最小音量時,您會聽到音效通知。

Page 41: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

繁體中文 41

PC

耳機音量

耳機的音量可以透過音箱前方的音量增加/減少按鈕來調整,而不會影響音箱的音量。

Page 42: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

42 한국어

내용물

1. MX Sound 스피커 2개2. 전원 케이블

3. 3 5mm 케이블 1개

Page 43: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 43

12

컨트롤

LED를 포함한 터치 컨트롤

1. Bluetooth®(흰색 LED)2. 볼륨(흰색 LED)

Page 44: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

44 한국어

1 2 3 4 5

PC

커넥터

1. 오디오 출력: 3 5mm 헤드폰 잭2. 전원

3. 왼쪽 스피커에 연결: RCA4. 오디오 입력: 3 5mm 잭5. 오디오 입력: 3 5mm 잭

Page 45: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 45

PC

AUX

PC

연결

Page 46: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

46 한국어

RPC

전원

MX Sound에는 전원 버튼이 없습니다 전원 코드에 연결되면 전원이 켜집니다 오디오 재생이 없고 20분이 지나면 전원을 절약하기 위해 스피커가 대기 모드로 들어갑니다

Page 47: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 47

대기

5초 동안 터치 컨트롤 앞에 움직임이 감지되지 않으면 LED 조명이 대기 모드로 들어갑니다

Page 48: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

48 한국어

3 inches

활성화 - LED 컨트롤

1. LED 조명이 불이 켜지지 않으면 대기 모드에 있는 것입니다

2. LED 조명을 활성화하려면 최대 3인치/70mm 거리에서 오른쪽 스피커 앞에서 손을 흔드십시오

3. Bluetooth® 페어링 버튼과 볼륨 컨트롤 LED가 나타납니다

Page 49: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 49

BLUETOOTH® 페어링

1. LED Bluetooth® 아이콘을 살짝 누르면 MX Sound가 페어링 모드로 들어갑니다

2. Bluetooth 장치를 검색하는 동안 Bluetooth 아이콘이 약 3분 동안 빠르게 깜박입니다

3. Logi MX Sound를 Bluetooth 장치로 선택합니다 4. 오디오 신호음이 울려 페어링이 성공했음을

알려줍니다

Page 50: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

50 한국어

1 2 1 2 1 21 2

1 2 3 4

Bluetooth Bluetooth

LogitechMX Sound

Connected

LogitechMX Sound

Connected

BLUETOOTH® 장치 간 전환

1. 이전 페이지의 Bluetooth 페어링 1 ~ 4단계를 따라 두 대의 장치가 Logi MX Sound에 연결되었는지 확인하십시오 연결이 끊긴 경우 Bluetooth 장치 목록을 확인하고 Logi MX Sound를 선택해 다시 연결하십시오

2. 장치 1에서 오디오를 재생합니다 3. 장치 1에서 오디오를 일시 중지합니다 4. 장치 2에서 오디오를 재생하면 오디오가 자동으로 전환되고 장치 2에서

스트리밍됩니다 장치 간을 전환하는 데 몇 초 정도 걸릴 수 있습니다

Page 51: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 51

BLUETOOTH® 다시 연결

1. Bluetooth 아이콘을 두 번 클릭합니다 2. 오디오 신호음이 울려 MX Sound가 재연결 모드에

있음을 확인해줍니다 3. MX Sound가 마지막으로 연결되었던 장치에 다시

연결됩니다

Page 52: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

52 한국어

1 2 1 2 1 21 2

1 2 3 4

Bluetooth

LogitechMX Sound

Connected

ConnectedLogitechMX Sound

여러 장치 간 전환

1. Bluetooth® 또는 3 5mm 입력을 통해 장치가 Logi MX Sound에 연결되었는지 확인하십시오

2. 장치 1에서 오디오를 재생합니다 3. 장치 1에서 오디오를 일시 중지합니다 4. 장치 2에서 오디오를 재생하면 오디오가 자동으로 전환되고 장치 2에서

스트리밍됩니다 장치 간을 전환하는 데 몇 초 정도 걸릴 수 있습니다

Page 53: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

한국어 53

볼륨 조절

1. 볼륨 버튼을 위 또는 아래로 누르면 사운드 알림을 들을 수 있습니다

2. 볼륨 버튼을 위 또는 아래로 길게 누르면 사운드 알림이 울리지 않습니다

3. MX Sound가 최대 또는 최소 볼륨에 도달하면 사운드 알림을 들을 수 있습니다

Page 54: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

54 한국어

PC

헤드폰 볼륨

헤드폰의 볼륨은 스피커 볼륨에 영향을 주지 않으면서 스피커 앞쪽에 있는 볼륨 크게/작게 버튼으로 조정할 수 있습니다

Page 55: MX SOUND - LogitechMX Sound Connected Logi tech MX Sound Connected SWITCHING BETWEEN BLUETOOTH®DEVICES 1. Make sure that your two devices are connected to Logi MX Sound following

Get support atwww logitech com/support/mxsound

获取支持www logitech com/support/mxsound

在下列網頁可獲得支援:

www logitech com/support/mxsound

추가 지원

www logitech com/support/mxsound

© 2017 Logitech All rights reserved Logitech, Logi, 罗技 and other Logitech marks are owned by Logitech and may be registered Bluetooth® is a registered trademark of Bluetooth SIG, Inc All other trademarks are the property of their respective owners

版权所有 © 2017 年罗技。 保留所有权利。 罗技、Logi 和其他罗技商标均归罗技所有,并或已注册。 蓝牙™ 是 Bluetooth SIG, Inc 的注册商标。 所有其它商标均是其各自所有者的财产。

版權所有 © 2017 年羅技。 保留所有權利。 羅技、Logi 和其他羅技商標均歸羅技所有,並或已註冊。 藍牙是 Bluetooth SIG, Inc 的註冊商標。 其他非羅技商標,仍由各該商標所有人擁有其權利。

© 2017 Logitech All rights reserved Logitech, Logi 및 기타 Logitech 상표는 Logitech의 소유이며 등록 상표일 수 있습니다 Bluetooth®는 Bluetooth SIG, Inc 의 등록 상표입니다 그 밖의 모든 상표는 해당 소유자의 자산입니다

WEB-621-001013 002