ZSANYCAM

4k

2880*2160

CautionsBefore use machine，please read below attentions carefully：

1.Please Operate according to manual ,incorrect operation will cause camera damaged.2.Please do not fall or impact camera,otherwise camera will get damaged3.Please do not expose camera into wet or dusty environment，otherwise battery will leakage and cause fire4.We suggest use camera in the environment during 10℃~70℃ to get the maximumpower of battery5.Ensure camera being off when memory card need insertion and extraction，to protect card or storage data damage6.Temperature will rise after camera use for a time，it is normal phenomenon7.Please do not touch the lens,to make camera work well8.Please use special glasses cloth to clean the fingerprints or dust on the lens

mode

Operation manualAppearance introduction

Mic SD

USB

HD OUT

HD

OU

UP

Down Speaker

WIFI LED light

OK key

Working indicator led light

Charging indicator led light

Rear LCD Dispaly

Key function introductionPower button: Used to turn on or off; Press this button to capture a picture while recording; switch camera mode, playback mode, menu mode conversion when camera standby.2.OK button: used for recording, stop recording and taking pictures; for playback video and stop the video; in the system settings for entry / confirmation menu option3. Up key ▲: Press and hold to zoom in the image during camera standby or video recording. Select the function and turn-up option in the menu setting. In the playback mode, it is used for fast backward playback; short press to enter WIFI mode in standby mode.4. Down key ▼: Press and hold to decrease the image during standby or recording; short press to turn off the microphone in standby mode; to fast forward in playback mode; and select function and scroll down in menu setting.

Battery chargePlug the charger into the USB port of the camera and plug the charger into the mains power. The red light is on and the battery icon on the display beeps. When the battery is fully charged, the red light turns off.Tips:1. In order to improve the charging efficiency, please charge in the shutdown state2. Make sure that the charger is plugged into an electrical outlet

Boot the cameraLCD screen display camera, exposure compensation, recording icon, recording time, resolution, memory symbols, the LCD screen displays the screen, and then press the power button for 3 seconds, the machine prompts and the work of long light, LCD display boot screen after boot (default for the cycle video state) Battery symbol, watermark time, battery icon.

Turn off the camcorderWhen camera power on, long press the power button for 3 seconds, camera will turn off when heard a shutdown sound and shut down LOGO appears.

Video recordingLoop recording

1. If the cycle recording is turned on, set the cycle recording for 3 minutes, press the OK button to start recording, machine will automatically save 3 minutes video, after that, machine will continue to record the video, but the video recording display on the screen will show it starts with 0 ,2. When TF card memory of the camera full, the machine will automatically delete the memory card and other video clips.Normal recordingWhen you close the cycle recording, press OK button is normal recording, the normal recording video is only one file, when the card memory is full, camera will automatically stop recording.Motion detectionWhen "Rec Video" is set to "Off" and "Motion Detection" is selected, it will automatically record when the camera detects the movement of the object and automatically stop recording after 10 seconds when no object is moving. .Tips: circular video, time recording, motion detection three functions can not open at the same time.CapturePress the power button during recording mode to capture an image .Note: In the capture mode , the video will still continues, only in browse mode you can view the captured images.

Take picturesNormal shooting

In standby mode, press the power button to switch to the camera mode, LCD display camera icon, exposure compensation, white balance, ISO, the right to display the number of photos can be shot, pixels, image quality, card symbols, battery symbols. Click OK button to take pictures, and will automatically save.Continuous shooting functionSelect "Continuous" and confirm the exit, continuous shooting off, you can return to normal camera.This function, click the OK button, the machine takes a picture,click OK again, the machine will begin to take pictures, until again click OK button, the machine to stop taking pictures.

ZoomIn the camera, video mode, long press ▲ and ▼ keys to zoom in and out of the image.

Playback mode

In playback mode, press ▲ and ▼ to select video or photo into preview, press OK buttonto play the select video clips; press OK button during playback to stop playing. Press the▼ button to fast forward, press the ▲ key to fast rewind, press the OK button to stop.

Screen signal introduction

WIFI ON

VIDEO RECORDING

LOOP RECORDING

FULL POWER BATTERY

SHOOTING TIME AND SPARE MEMORY

TF CARD

SHOOTING

TIMING

CONTINUOUS SHOOTING

Menu Function

Resolution UHD P24/QHD P30/FHD P60/FHD P30/HD P60/HD P30/WVGA P30/VGA P240/VGA P30/QVGA P30

Loop recording OFF/3Minutes/5Minutes/10Minutes

Gyroscope OFF/ON

WDR OFF/ON

Time-lapse Record OFF/100ms/200ms/500ms/1Sec/5Seconds

Motion Detection OFF/ON

Record Audio OFF/ON

Date Stamp OFF/ON

Angle 170°/140°/110°/70°

Diving mode OFF/ON

Night Scene OFF/ON

Self Timer Single/2S Timer/5S Timer/10S TimerImage Size 20M 5120*3840/16M 4608*3456/12M 4032*3024/10M

3648*2736/8M 3264*2448/5M 2592*1944/3M2048*1536/VGA640*480

Burst OFF/Burst 3/Burst 5/Burst 10Quality Fine/Normal/EconomySharpness High/Normal/MediumWhite Balance Auto/Daylight/Cloudy/Tungsten/FluorescentColor Color/Black&WhiteISO Auto/100/200/400Exposur Value +2.0/+1.7/+1.3/+1.0/+0.7/+0.3/0/-0.3/-0.7/-1.0/-1.3/-1.7/-2.0Anti-Shaking OFF/ONDelete Delete Current/Delete All

Protect Lock Current/Unlock Current/Lock All/Unlock All

WIFI OFF/ON

WIFI SSID Action Cam

WIFI Pass Word 12345678

Date/Time 200/01/01 08:33:57 YY/MM/DD

Auto Power OFF OFF/1Minutes/3Minutes/5Minutes/10Minutes

Beep Sound OFF/ON

Voice Prompt OFF/ON

OSD OFF/ON

CAR ACC OFF/ON

Language -------

TV Mode NTSC/PAL

TV OFF/ON

Screen Save OFF/30 Sec/1Minute/3Minute

Frequency 50HZ/60HZ

Format SD Caed

Default Setting Cancel/OK

Version Model:Action Cam/Version:20160919V2.0

WIFIThe product can be connected with Android/IOS mobile devices through wifi. Steps as below:

1.Install the APP“ZSANYCAM”APP on the mobile devices;

a.aFor Android, search the APP“ZSANYCAM” ，in Android market, 360

Mobile Assistant or Google to get it installedb.For IOS, search“ZSANYCAM”in App store to get it installed.2.After power on the camera, long press Up key to open wifi. Then the LCD shows the wifi name and password 123456783.Find the wifi on the mobile devices, enter the password to connect;

4.After wifi connecting, open the APP ZSANYCAM APK on the mobile

device, 5.ress button to change mode between Video and Photo

6. Press button to view videos and photos;

7. In mode of playback, long press the file title to download. After finishing download,

press button to check. 5、Product Parameters

iOS APP Download for Wi-Fi Edition

Android APP Download for Wi-Fi Edition

Resolution UHD24PFS QHD30FPS FHD60FPS FHD30FPS HD60FPS HD30FPS WVGA30FPS VGA240FPS VGA30FPS QVGA30FPS

Image Size 20M/16M/12M/10M/8M/ 5M/3M/VGALens 170°hd wide view angleISO AutoWhite Balance AutoLCD 2.0 inch TFT LCDImage format JPEGVideo format MP4Video compressed format H.264Connector Micro USB2.0, HD OUTPower 5V/1APower Consumption About 5V/600MABattery capacity 900MAHRecording time 1080P/About 60Charging time About 2 hoursOS Windows XP/7/8 SP3/Vista and Mac 10.5 or aboveStorage temperature -10℃～+55℃Working temperature -20℃～+70℃Humidity 5% ～ 95%（no frost）

Waterproof Underwater 30M with waterproof caseNormal waterproof Waterproof rate of camera body IPX5Dustproof About IEC IP6XTF card UP to 32G，hot plug available