NDT organisation

APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only

1

ISSUE NO 94 rev A DATE 4th January 2016 REF APP-LIST-NDT

List of NDT & Inspection Approved Training Organisations

CONTENTS

Part 1 – Accredited Non-Destructive Testing (NDT) Courses Available Page 3

Part 2 – Courses outside the scope of PCN meeting specific criteria Page 14

Part 3 – Providers of individually designed level 3 training packages recognised by BINDT Page 18


2


Foreword Approval of Level 3 Training.

The BINDT Approval Panel, which reports to MQ&E (Membership, Qualification and Education Committee) routinely accredits training courses at Level 1 and 2. Courses are approved as meeting specific requirements, (generally defined in terms of an examination syllabus) and the object of the exercise is to ensure that all aspects of the syllabus are addressed within the training course at a suitable level and depth. Most courses that are accredited will be for training prior to PCN examinations but that need not always be the case. For instance if an ATO has a requirement to train candidates to perform a range of well defined tasks, then a training course could be designed, and subsequently accredited by BINDT as meeting those requirements and would be listed under part 2 of the approval list. The syllabus is well defined, therefore a training course can be designed to cover those areas of learning. This works well for Level 1 and Level 2 training but it does not work at Level 3. Level 3 courses need to be well versed in a very broad range of knowledge and the candidate should be familiar with Product Technology, the other four main NDT methods, Procedure Writing and so on. The way that we address this dilemma is to define three main requirements that training centres must meet if they are to be recognised as providers of Level 3 training:

1. The tutors must be Level 3 Certificated. 2. The training school must have available the defined Essential Reading material. 3. There must be a system in place whereby candidates are assessed on arrival, (or beforehand), in order to identify the gaps in their knowledge. The

training course must then be specifically designed to address those areas of weakness.

The course content must be designed as a bespoke product, suited to a particular individual. Any training establishment that meets the three requirements set out above may request that BINDT recognises that they are capable of offering Level 3 training courses and once proven at audit can be listed under part 3 of the approval list but will not be included on their certificate of approval.


3


PART I Accredited Non-Destructive Testing (NDT) Courses Available

Note: Courses validated as suitable pre-approval training for PCN examinations also broadly satisfy the General Theory and Product Technology requirements of employer-based schemes (e.g. NAS 410, EN 4179 and SNT TC 1A). Any course offered under a company-based certification scheme must also satisfy the requirements of the employer’s written practice and training programme. It is the employer’s responsibility that any necessary company specific training that would fall outside the validated course syllabus and content is adequately addressed. Condition Monitoring courses are in accordance with ISO18436 and CMGEN.

All courses listed below are approved as suitable preparation for the corresponding PCN examinations.


4


KEY TO CODES TO DEFINE SCOPE OF APPROVAL

Numbers in bold type indicate the certification level at which the course(s) are aligned. Letter(s) indicate the product sector to which each course is aligned.

CODE PRODUCT SECTOR

G GENERAL W WELDS C CASTINGS F FORGINGS/WROUGHT PRODUCTS A AEROSPACE R RAIL ISI IN-SERVICE INSPECTION

CODE SCOPE OF COMPETENCE

a X-Ray only b Dense Metals only c Ultrasonic testing of railway axles d Ultrasonic testing of railway axles

(solid or hollow) e Single frequency Eddy Current Testing of

Welds g Tube testing r Rail

TOFD Time of Flight Diffraction PA Phased Array

CODE NDT METHOD

RT Radiographic Testing RI Radiographic Interpretation

CRT Computerised Radiographic Testing UT Ultrasonic Testing MT Magnetic Particle Testing PT Penetrant Testing ET Eddy Current Testing VT Visual Testing WI Weld Inspection

ACFM Alternating Current Field ISI UT

UT thickness Measurement + Corrosion Monitoring of steel

l l


5


APPROVED TRAINING ORGANISATIONS - UK

EAST ANGLIA – Name of Approved Training Organisation & Contact Details

RT RI CRT UT MT PT ET VT WI ACFM

International School of Aerospace NDT Hurricane Way Norwich Airport Norfolk NR6 6EZ

Contact: Sandy Lerski T: +44 (0) 1603 401 717 E: [email protected] W: www.isandt.co.uk

1,2

A 1,2

A 1,2

A 1,2

A 1,2

A

TWI Ltd - Cambridge Granta Park Abington Cambridge CB21 6AL

Contact: Mike Foster T: +44 (0) 1223 899 500 E: [email protected] W: www.twitraining.com

2 W,C

2 W,C

1,2 G

TOFD

PA

1,2 W,F,C

1,2 W,F,C

2 F,A

Tri Service School of NDT 71 Inspection & Repair (IR) Squadron RAF Wittering Peterborough PE8 6HB

Contact: Philip Byram T: +44 (0) 1780 417138 E: [email protected] E: [email protected]

2 A 2

A 2 A

2 A

2 A

EAST of ENGLAND – Name of Approved Training Organisation & Contact Details


Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Stansted Airport Bishop’s Stortford Essex CM22 6SJ

Contact: Samantha Wright T: +44 (0) 1279 870276 E: [email protected] W: www.aerospacendt.co.uk

1,2a

A

1,2

A

PA

1,2

A 1,2

A 1,2

A

mailto:[email protected]�

http://www.isandt.co.uk/�


http://www.twitraining.com/�



http://www.aerospacendt.co.uk/�


6



EAST MIDLANDS – Name of Approved Training Organisation & Contact Details


SERCO Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP

Contact: Paul Seaton T: +44 (0)1332 264 782 E: [email protected]

1,2d 1r

1,2 W,F,C,R

NORTH EAST – Name of Approved Training Organisation & Contact Details


NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton-on-Tees TS18 3HF

Contact: Geoff Mason T: +44 (0) 1642 604 661 E: [email protected]

2 W

2 W

2 W

2 W

2 W

TWI Technology Centre (North) Aurora Court Riverside Park Middlesbrough Cleveland TS2 1RY

Contact: Mike Foster T: +44 (0) 1642 216320 E: [email protected] W: www.twitraining.com

2 W,F,C

2 W,C

1,2 G

2 W

2 W,F,C

2 W,F,C

2 F,A

1,2 Wf

Shoreland Training NDT Ltd 8 Jupiter Court Tyne Tunnel Trading Estate Newcastle Upon Tyne NE29 7SE

Contact: Neil Cox T: +44 (0) 845 2571204 E: [email protected] W: www.shorelandndt.com

2 W

1,2 W,F

1,2 W, F &

C

1,2 W, F &

C

1,2 W

1,2






http://www.shorelandndt.com/�


7



SCOTLAND – Name of Approved Training Organisation & Contact Details

RT RI CRT UT MT PT ET VT WI ACFM ISI UT

Fife College Future Skills Centre, Stenton Road Glenrothes Fife KY6 2RA

Contact: Peter McPherson T: +44 (0) 1592 223 355/223 387 E: [email protected] W: www.adamsmithcollege.ac.uk

2 W

2 W

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C 2

Array Training Limited (prev. Rigmar) International Base Greenwell Road East Tullos Aberdeen AB12 3AX

Contact: Ray Wilson/Claire Fyvie T: +44 (0) 1224 243 000 E: [email protected] W: www.rigmartraining.com

1,2 W

Basic Rad

Safety

2 W

1,2 W,P

1,2 W,F,C

1,2 W,F,C

1,2 W

ISI UT

NORTH WEST – Name of Approved Training Organisation & Contact Details


ATH NDT Ltd The Workshop, Colne Road Kelbrook Barnoldswick BB18 6TE

Contact: Alex Lambie T: +44 (0) 1282 842624 E: [email protected] W: www.athconsultants.co.uk www.athndtequipment.co.uk

1,2 W,F,C

1,2 W,F,C

Global School of NDT Unit 10 Woodgate Park Newgate, Morecambe LA3 3PS

Contact: Sandra Yates T: +44 (0) 1524 380985 E: [email protected] W: www.gsndt.com

PA 1,2

Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ

Contact: Miss Suzanne M. Judge T: +44 (0) 1253 696400 E: [email protected] W: www.talonndtblackpool.com

2 W

1,2

W,F 1,2

W,F,C 1,2

W,F,C 1,2 W


http://www.adamsmithcollege.ac.uk/�


http://www.rigmartraining.com/�

http://www.athconsultants.co.uk/�

http://www.athndtequipment.co.uk/�


http://www.gsndt.com/�


8



SCOTLAND – cont’d… RT RI CRT UT MT PT ET VT WI ACFM

Talon NDT Ltd Unit 9, Murcar Commercial Park Denmore Road Bridge of Don Aberdeen AB23 8JW

Contact: Ian Judge T: +44 (0) 1224 822 251 E: [email protected] W: www.talonndt.co.uk

1,2 W

Basic Rad

Safety

2 W

1,2

W,F 1,2

W,F,C 1,2

W,F,C 1,2 W

TWI Aberdeen Unit 20 Spires Business Centre, Mugiemoss Road, Bucksburn Aberdeen AB21 9BG

Contact: Andrew Jeffreys T: +44 (0) 1224 691 222 E: [email protected] W: www.twitraining.com

2 W,C

1,2 G 1,2

W 1,2

W,F,C 1,2

W,F,C 1,2 W

Sonomatic Ltd Unit 1, Energy Development Centre Claymore Drive Bridge of Don Aberdeen AB23 8GD

Contact: Donna Stewart T: +44 (0) 1224 823960 E: [email protected] W: www.sonomatic.com

2 W

1,2 W,F

TOFD

PA (W,F)

1,2 W,F,C

1,2 W,F,C

1,2 We

WALES – Name of Approved Training Organisation & Contact Details


South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff CF23 8HF

Contact: Michelle Clapham T: +44 (0) 292 054 0000 E: [email protected] W: www.swsndt.co.uk

1,2 W,A

2 W

1,2 A,W

1,2 W,F,C,

A

1,2 W,F,C,

A

1,2 A,F

1,2 W,F,C 2

Testia Ltd Quadrant House, Celtic Springs, Coedkernew, Newport NP10 8FZ

Contact: Charlotte Smith T: +44 (0) 1633 715811 E: [email protected] W: www.testia.com

1,2 A

1,2 A

1,2 A

1,2 A

1,2 A


http://www.talonndt.co.uk/�





http://www.swsndt.co.uk/�


http://www.testia.com/�


9



WEST MIDLANDS – Name of Approved Training Organisation & Contact Details


Argyll Ruane Ltd Units 5 Block 6 Shenstone Trading Estate Bromsgrove Road Halesowen B63 3XB

Contact: Andy Kular T: +44 (0) 121 585 7616 E: [email protected] W: www.imeche.org/arl

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C

TOFD PA

1,2 W,F,C,R

1,2 W,F,C,R

1,2 W

1,2 W,F,C 1,2

NDT Consultants Ltd Middlemarch House Siskin Drive Coventry CV3 4FJ

Contact: Linda Dulay T: +44 (0) 24 7651 1151 E: [email protected] W: www.ndt-consultants.co.uk

2 F,C,A

2 F,C,A

2 F,C,A

2 F,C,A

YORKSHIRE & HUMBER – Name of Approved Training Organisation & Contact Details


Argyll-Ruane Ltd 4 Europa View Sheffield Business Park Sheffield S9 1XH

Contact: Stephen Wisniewski T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org/arl

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C TOFD

PA

1,2 W,F,C,

R

1,2 W,F,C,R

1,2 W

1,2 W,F,C 1,2

Lavender International NDT Consultancy Services Limited Unit 7, Penistone Station Sheffield S36 6HP

Contact: Nicola Dodsley T: +44 (0) 1226 765 769 E: [email protected] W: www.lavender-ndt.com

1,2 W,F,C

2 W,C

1,2 W,F,C

1,2 W,F,C

TOFD-W PA -

W,F,C

1,2 W,F,C

1,2 W,F,C

1,2 F g

1,2 W e

1,2 W,F,C 2 1,2

W


http://www.imeche.org/arl�


http://www.ndt-consultants.co.uk/�


http://www.imeche.org/arl�


http://www.lavender-ndt.com/�


10



YORKSHIRE & HUMBER – cont’d… RT RI CRT UT MT PT ET VT WI ACFM NDT Ltd Maltravers Road Sheffield South Yorkshire S2 5AD

Contact: Mr S Sennett T: +44 (0) 1142 727 317 E: [email protected] W: www.ndt.ltd.uk

2 W,F,C,

A 1,2

W,F

2 W,F,C,

A

2 W,F,C,

A

Tata Steel UK Limited Stocksbridge Sheffield S36 2JA

Contact: Mr John Barker T: +44 (0) 1142 832 071 E: [email protected] W: www.tatasteel.com

1,2


http://www.ndt.ltd.uk/�


11


APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE

CARIBBEAN – Name of Approved Training Organisation & Contact Details


NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.

Contact: Sonny James T: (868) 653 9343 E: [email protected] W: www.learnndt.com

1,2

W 1,2

W,F,C 1,2

W,F,C

AUSTRALIA – Name of Approved Training Organisation & Contact Details


ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia

Contact: Paul Grosser T: +61 3 9574 6144 E: [email protected] W: www.attar.com.au

2 W

2 W

2 W,F,C

2 W,F,C

Lavender International NDT 454 Victoria Road Malaga 6090 Perth Western Australia

Contact: Catherine Fleay T: +61 (8) 9249 6005 E: [email protected] W: www.lavender-ndt.com

2 W

1,2 W

TOFD

PA

1,2 W,F,C

1,2 W,F,C

1,2 W

1,2

TCS NDT 53 Prosperty Way Wangara Perth Western Australia 6065

Contact: Alisa Hewling T: +61 (0) 415 573095 E: [email protected] W: www.tcsndt.com.au

1,2

TOFD PA (W)

1,2 W,F,C

1,2 W,F,C

1,2

W

CHINA (PEOPLE’S REPUBLIC) – Name of Approved Training Organisation & Contact Details


SGS (Shanghai) NDT Training & Examination Centre SGS-CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road, Pudong District, Shanghai 201319, P.R. China

Contact: Shelley Xu T: +86 21 6119 6406 E: [email protected] W: www.sgs.com

1,2 W,C 1,2 C

2 W,Cb

1,2 W,F,C

TOFD

PA (W)

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C


http://www.attar.com.au/�




http://www.sgs.com/�


12



GREECE – Name of Approved Training Organisation & Contact Details


VOCATIONAL TRAINING CENTER: INDUSTRIAL AND BUSINESS EDUCATION AND TRAINING INSTITUTE- SEV Hellenic federation of enterprises.

KΕΚ Ι.V.EP.E-SEV 143 Liossion & 6 Theirsiou Str. Attikis Square 10445 Athens Greece

Contact: Mr Thanos Totsikas T: +30 210 8257 817 E: [email protected] W: www.ivepe.gr

Basic Rad

Safety course ONLY

1,2 W,P

1,2 W,F,C

1,2 W,F,C

1,2 W,F,C 2

TQCC/Lavender Greece Z Pigis 51 382 22 Volos Magnesia Greece

Contact: Athena Xirofotou T: +30 24210 59881 E: [email protected] W: www.ketepe-ndt.com

1,2 W

2 W

1,2 W

‘PLATE’ F,C

PA 1,2

1,2 W,F,C

1,2 W,F,C

1,2 F

1,2 W,F,C 2

INDIA – Name of Approved Training Organisation & Contact Details


NDT International (Chennai) 24-A Sannathi Street, Kamatchi Nagar Valasaravakkam, Chennai - 600087 Tamil Nadu, India

Contact: Mr Venkatraman Guruswamy T: +91 9840 393 344 E: [email protected]

2 W

1,2 W

TOFD PA

1,2 W

1,2 W

1,2 W,F


http://www.ivepe.gr/�


http://www.ketepe-ndt.com/�



13



INDIA – cont’d RT RI CRT UT MT PT ET VT WI ACFM

NDT International (Trichy) Sri Venkatachalapathy Modern Rice Mills 6 Ambethkar Street Oil Mill Road Ariyamangalam Trichy 620010


2 W

1,2 W

TOFD

PA

1,2 W

1,2 W

NDT International (Visag) D.No.31-29-22/1 Sanathamamidi Thota Street Vadlapudi PostKurmannapalem Vishakapatnam Opp, Visag Steel Plant Main Gate

Contact: Mr Venkatraman Guruswamy T: +91 0891-2543637 E: [email protected]

1,2 W

1,2 W

1,2 W

Noble Quality Evaluation Private Ltd Plot no. 20 & 21, Anjaneya Nagar (Near Miet), Gundur (Post), Tiruchirapalli, 620007, Tamil Nadu, India

Contact: Mr Ramesh Narayanasamy T: +91 822 095 4947 E: [email protected]

2 W b 1,2

W 1,2 W

1,2 W

Decibel NDE Inspections & Training Institute 1st Floor Plainfield Business Enclave Near Civil Court, Pattambi, Palakkad District, Kerala, India - 679303

Contact: Mr Sangeeth Kavil P T: +91 808 9000 250 E: [email protected]

2 W 1,2

W 1,2 W

1,2 W 2

BIT inspection Technology No. 11, 6th Pillaiyar Koil Street, Ambal Nagar, Ekkatthuthangal, Chennai India 600032

Contact: Rajamanickam Baskar T: +91 98408 00863 E: [email protected]

1,2 W

2 W b 1,2

W 1,2 W

1,2 W

Smart Technocrats and Consultancy Services (I) Pvt. Ltd Plot No. 5ector 18A, Nerul, Navi, Mumbai, India 400706

Contact: Sunil Mukul T: +91 22 2770 6055 E: [email protected] / [email protected]

2 W b

1,2 W

TOFD

PA (W)

A-Star Training and Consultancy Pvt Ltd “Shree” Building, 47/11-1 Devadi Street, Off Kutchery Road Near More Supermarket, Mylapore, Chennai 600004 Tamil Nadu, India

Contact: Anup Nair T: +91 44 2495 0082 E: [email protected]

2 W

1,2 W

TOFD

PA (W)

1,2 W

1,2 W








14



INDONESIA – Name of Approved Training Organisation & Contact Details


PT Pro-Specs Indopratama (dB School of NDT) Ruko Permata Niaga Block C No. 12a & 12b Sukajadi, Batam, 29432 Indonesia

Contact: Sirajul Hameed Masroor T: +62 778 427858 E: [email protected] W: www.astar-training.com

2 W

1,2 W

TOFD

PA (W)

1,2 W

1,2 W

Indonesia Institute of NDT (IINDT) Trikarsa Equalita, Block C, No 12, Sei Panas, Batam, Indonesia 29433

Contact: Brillian Wiraprima Sardi T: +62 778 472 122 E: [email protected]

2 W

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2

MALAYSIA – Name of Approved Training Organisation & Contact Details


MINDT No 18 Jalan Tanjung SD 13/2, Bandar Sri Damansara, 52200 Kuala Lumpur, Malaysia

Contact: Tan Hendry T: +60 3 6280 3448 E: [email protected] W: www.mindt.com.my

2 W

1,2 W

1,2 W

1,2 W

1,2

TWI TECHNOLOGY (S.E.ASIA) SDN BHD No. 1, Jalan Utarid U5/13, Section U5, 40150, Shah Alam, Selangor Darul Ehsan

Contact: Noorhaslinda Binti Ahmad Nasir T: +603-7848 1000 E: [email protected] W: www.twitraining.com

2 W

1,2 W

TOFD

PA

1,2 W,F,C,

A

1,2 W,F,C,

A

Intec Training and Certification PTE Ltd No 7 Jalan Cendrai 26, KSWN Perindustrian, Kota Putri, 81750 Masai, Johor Bahru, Malaysia

Contact: Mr R Rajakumar T: +607 382 2000 E: [email protected] W: www.intectraining.com

2 W

1,2 W

TOFD

PA

1,2 W

1,2 W

NETHERLANDS – Name of Approved Training Organisation & Contact Details


TÜV Rheinland Sonovation BV Elschot 30 4905 AZ Oosterhout The Netherlands

Contact: Mr Erik van der Spek T: +31 (0) 162 425588 E: [email protected] W: www.tuv.com/andt

TOFD


http://www.astar-training.com/�



http://www.mindt.com.my/�





http://www.tuv.com/andt�


15


APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE SINGAPORE – Name of Approved Training Organisation & Contact Details


A-Star Training and Consultancy Pte Ltd #05-111, 18 Boon Lay Way Tradehub 21 Singapore, 609966

Contact: Shaik Khaja Mohiuddin T: +65 6465 0877 E: [email protected] W: www.astar-training.com

2 W b

1,2 W

TOFD PA

1,2 W

1,2 W

NDT International Pte Ltd 61 Bukit Batok Crescent #07-05, Heng Loong Building Singapore 658078

Contact: Mr Venkatraman Guruswamy T: +65 6316 2770 E: [email protected]

2 W

1,2 W

TOFD PA

1,2 W

1,2 W

SETSCO Services PTE Ltd 18 Teban Gardens Crescent, Singapore 608925

Contact: Sze Thiam Siong T: +65 6566 7777 E: [email protected] W: www.setsco.com

1,2 W,A

1,2 W,A

PA

1,2 W,F,C,

A

1,2 W,F,C,

A

1,2 A

SOUTH AFRICA – Name of Approved Training Organisation & Contact Details


African NDT Centre (Pty) Ltd 224 Witch-Hazel Avenue Highveld Technopark Centurion South Africa

Contact: Mr W Claassens T: +27 (0) 12 665 3248 E: [email protected] W: www.andtc.com

1,2 W

2 W

1,2 W

PA

1,2 W,F,C

1,2 W,F,C

1,2 W1

1,2

Non-Destructive Academy of South Africa CC (NASA Cape Town branch) 23 John X Merriman Street, Oakdale, Bellville, Cape Town, South Africa 7530

Contact: Ben Buys T: +27 (0) 21 948 3088 E: [email protected] / [email protected] W: www.nondestructive.co.za

1,2 W

1,2 W

Non-Destructive Academy of South Africa CC (NASA Durban branch) 3 Pastoll Road, Sarnia, Durban, South Africa

Contact: Nish Kanaye T: +27 (0) 31 708 3433 E: [email protected] / [email protected] W: www.nondestructive.co.za

1,2 W

1,2 W

http://www.astar-training.com/ndttrngcont.htm�

http://www.astar-training.com/�



http://www.setsco.com/�


http://www.andtc.com/�



http://www.nondestructive.co.za/�



http://www.nondestructive.co.za/�


16


APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE UNITED ARAB EMIRATES UAE – Name of Approved Training Organisation & Contact Details


WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC PO BOX 393179, Unit 2F-A-02, Empire Heights, Tower A, Business Bay, Dubai, UAE

Contact: Babu Sajeesh Kumar T: +971 4554 6284 +971 5624 28507 E: [email protected]

1,2 W

2 W

1,2 W

1,2 W,F,C

1,2 W,F,C

1,2 W1

1,2



17


PART 2 Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN)

Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.


18


Training Organisation Contact Method(s) 1. Aerospace Inspection Training Ltd Units 9 & 10 Takeley Business Centre Dunmow Road Takeley, Stansted Airport Bishop’s Stortford Essex CM22 6SJ

Contact: Samantha Wright T: +44 (0) 1279 870276 E: [email protected] W: www.aerospacendt.co.uk

• Infrared Thermography (Aero) • Acid Etch Inspection • Bond Testing of structures using the Staverley

Bondmaster

2. Argyll Ruane 4 Europa View Sheffield Business Park Sheffield S9 1XH

Contact: Mr Andy Kular T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org

• Acid Etch Inspection • Hardness Testing • Conductivity Testing • Ultrasonic Testing of

Wrought Plate including Thickness Gauging (ISO 20807)

• Anodic Testing • MT Rail Upgrade

• PT Rail Upgrade • 26 week

NDT/Inspection Training Programme

• BGAS Transition to PCN Weld Inspector level 2

• Infrared Thermography level 1 (SNT-TC-1A)

3. ATH NDT Ltd The Workshop, Colne Road Kelbrook Barnoldswick Lancashire BB18 6TE

Contact: Alex Lambie T: +44 (0) 1282 842624 E: [email protected] W: www.athndtequipment.co.uk

• Acid Etch Inspection • Anodic Flaw Detection • Conductivity Testing • Hardness Testing • Mechanical Testing • Visual Inspection

4. International School of Aerospace NDT Hurricane Way Norwich Airport Norfolk NR6 6EZ

T: +44 (0) 1603 401 717 E: [email protected] W: www.isandt.co.uk

• Infrared Thermography (Aero)

5. Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP

Contact: Ms N Dodsley T: +44 (0) 1226 765 769 E: [email protected] W: www.lavender-ndt.com

• Eddy Current Testing of Non-Ferromagnetic Tubes

• Acid Etch Inspection • Hardness Testing

• Conductivity Testing • Anodic Flaw Detection • Composite Materials

(courses also available at TQCC/Lavender Greece)

6. NDT Centre (Oceaneering Inspection) 109 Bowesfield Lane Stockton-on-Tees TS18 3HF

Contact: Melanie Holland T: +44 (0) 1642 604 661 E: [email protected]

• Profile Radiography GE Rad View Software Specific • Computed Radiography GE Rad View Software

Specific • Ultrasonic Time of Flight Diffraction (Basic and

Advanced)


http://www.aerospacendt.co.uk/�


http://www.imeche.org/�








19


Training Organisation Contact Method(s)

7. NDT Consultants Ltd Middlemarch House, Siskin Drive Coventry CV3 4FJ

Contact: Sarah Stacey T: +44 (0) 24 7651 1151 E: [email protected] W: www.ndt-consultants.co.uk

• Acid Etch Inspection • Anodic Flaw

Detection • Conductivity Testing • Hardness Testing

• Visual Inspection • Coating Thickness

measurement • Bond Testing

8. NDT Ltd Maltravers Road Sheffield South Yorkshire S2 5AD

Contact: Mr S Sennett T: +44 (0) 114 272 7317 E: [email protected] W: www.ndt.ltd.uk

• Ultrasonic Testing Thickness and Laminations ISO 20807

9. South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff CF23 8HF


• Acid Etch Inspection • Hardness Testing • Conductivity Testing • Anodic Testing • Laser Shearography (Aero) • Infrared Thermography (Aero)

11. Sonomatic Ltd Unit 1, Energy Development Centre, Claymore Drive, Bridge of Don, Aberdeen AB23 8GD

Contact: Donna Stewart T: +44 (0) 1224 823960 W: www.sonomatic.com

• Ultrasonic Testing of Wrought Plate including Thickness Gauging (ISO 20807)

12. Test NDT International Ltd 16 Tolsey Drive Hutton Preston Lancashire PR4 5SH

Contact: Richard/Catherine Harrison T: +44 (0) 1772 616913 E: [email protected] W: www.testndt.com

• Ultrasonic Phased Array Aircraft Inspection • Composite Bond Structure Inspection (Aerospace) • Eddy Current Array Level 1 and 2

13. TQCC/Lavender Greece Z Pigis 51 382 22 Volos Greece

Contact: Athena Xirofotou T: +30 24210 59881 E: [email protected] W: www.ketepe-ndt.com

• UT Castings (SNT) • RI/RT Castings (SNT)


http://www.ndt-consultants.co.uk/�


http://www.ndt.ltd.uk/�



http://www.sonomatic.com/�


http://www.testndt.com/�


http://www.ketepe-ndt.com/�


20


Training Organisation Contact Method(s) 14. Tri Service School of NDT NDES, RAF Wittering, Peterborough, Cambridgeshire PE8 6HB

Contact: Philip Byram T: +44 (0) 1780 417138 E: [email protected] E: [email protected]

• 10 week Aerospace NDT Technicians Course

15. TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road, Bucksburn Aberdeen, AB21 9BG

Contact: Elizabeth Bell T: +44 (0) 1224 691 222 E: [email protected] [email protected] W: www.twitraining.com


16. TWI - Training & Examination Services Granta Park Abington Cambridge CB21 6AL



17. TWI (North) - Training & Examination Services Aurora Court Riverside Park Middlesbrough Cleveland TS2 1RY



18. NDE Institute of Trinidad Ltd 15 Robertson Street, Les Efforts East, San Fernando, Trinidad W.I.

Contact: Sonny James T: (868) 653 9343 E: [email protected] W: www.learnndt.com


19. Talon NDT Blackpool Ltd 1 & 2 Keystone Court Hallam Way, Blackpool Lancashire FY4 5NZ

Contact: Suzanne Judge T: +44 (0) 1253 696400 E: [email protected] W: www.talonndtblackpool.com


20. Testia Ltd Quadrant House, Celtic Springs, Coedkernew, Newport NP10 8FZ

Contact: Charlotte Smith T: +44 (0) 1633 715811 E: [email protected] W: www.testia.com

• Magnetic Particle Testing EN 4179 • Liquid Penetrant Testing EN 4179 • Radiographic Testing EN 4179 • Eddy Current Testing EN 4179 • Ultrasonic Testing EN 4179










http://www.testia.com/�


21


PART 3 Historically, a number of Approved Training Organisations have offered level 3 training courses. By definition, these courses must be tailored to meet the

needs of individual candidates. Please refer to the Foreword on page 2.

Note: The following organisations have been recognised by BINDT as providers of individually designed level 3 training packages.


22


Training Organisation Contact

Argyll Ruane 4 Europa View Sheffield Business Park Sheffield S9 1XH

Contact: Andy Kular T: +44 (0) 114 399 5720 E: [email protected] W: www.imeche.org

International School of Aerospace NDT Hurricane Way Norwich Airport Norfolk NR6 6EZ

T: +44 (0) 1603 401 717 E: [email protected] W: www.isandt.co.uk

Lavender International NDT Unit 7, Penistone Station Sheffield S36 6HP


NDT International (Chennai) 24-A Sannathi Street, Kamatchi Nagar Valasaravakkam, Chennai - 600087 Tamil Nadu, India


South West School of NDT Merton House Croescadarn Close Pentwyn Cardiff CF23 8HF


TWI Aberdeen Unit 20 Spires Business Centre Mugiemoss Road Bucksburn Aberdeen AB21 9BG

Contact: Elizabeth Bell T: +44 (0) 1224 691 222 E: [email protected] W: www.twitraining.com

TWI - Training & Examination Services Granta Park Abington Cambridge CB21 6AL




http://www.imeche.org/�













23



TWI (North) - Training & Examination Services Aurora Court Riverside Park Middlesbrough, Cleveland TS2 1RY


SGS (Shanghai) NDT Training & Examination Centre SGS-CSTC Standards Technical Services Co Ltd, 2F, Building 8, No 69, 1159 East Kangqiao Road Pudong District Shanghai 201319 P.R. China

Contact: Shelley Xu T: +86 21 6119 6406 E: [email protected] W: www.sgs.com

ATH NDT Ltd The Workshop, Colne Road Kelbrook Barnoldswick BB18 6TE

Contact: Alex Lambie T: +44 (0) 1282 842624 E: [email protected] W: www.athconsultants.co.uk www.athndtequipment.co.uk

ATTAR Unit 1, 64 Bridge Road Keysborough, Victoria 3173 Australia

Contact: Paul Grosser T: +61 3 9574 6144 E: [email protected] W: www.attar.com.au

Serco Limited Room 130 Stephenson House RTC Business Park London Road Derby DE24 8UP

Contact: Deborah Stenson T: +44 (0)1332 264 782 E: [email protected]

Lavender International NDT Unit 4, 21 Harris Road, Malaga, WE6090, Perth, Western Australia





http://www.sgs.com/�

http://www.athconsultants.co.uk/�



http://www.attar.com.au/�




24



WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC PO BOX 393179, Unit 2F-A-02, Empire Heights, Tower A, Business Bay, Dubai, UAE

Contact: Babu Sajeesh Kumar T: +971 4554 6284 +971 5624 28507 E: [email protected]

SETSCO Services PTE Ltd 18 Teban Gardens Crescent Singapore 608925

Contact: Sze Thiam Siong T: +65 6566 7777 E: [email protected] W: www.setsco.com



http://www.setsco.com/�

Documents

NDT organisation