Upload
kimberly-velez
View
220
Download
0
Embed Size (px)
Citation preview
7/25/2019 NoFoam A
http://slidepdf.com/reader/full/nofoam-a 1/1
www.newparkdf.com
PRODUCT DESCRIPTION
NoFoam™ X A defoamer is an alcohol-based foaming agent.
BENEFITS
NoFoam A additive is a superior and versatile defoamer.
APPLICATION
NoFoam A defoamer is used in all d rilling fluids and brine-
based completion fluids to control surface foaming
TREATMENT RECOMMENDATION
To control surface foam, the product should be splashed on
the surface of the fluid system. Alternatively, the productcan be slowly trickled above the mud trough through a small
hole in the bottom of the pail..
TYPICAL PHYSICAL PROPERTIES
Appearance .............................................. Clear to amber liquid
Specific Gravity ....................................................................... 0.83
Flash Point .............................. ................ ................. ...... 181°F (83°C)
HANDLING AND STORAGE
Avoid inhalation, as NoFoam A fumes can cause nervous
system depression, including dizziness, drowsiness, and loss
of consciousness. Store in a cool, dry, well ventilated area
well away from ignition sources and strong oxidizing agents.
Keep container tightly closed. Use appropriate hygiene,
clothing and personal protective equipment suitable for
work being done. Review the MSDS thoroughly before
using this product.
PACKAGING
NoFoam A defoamer is available in 5-gallon (19-liter) pails.
NOFOAM™ A
PRODUCT BULLETIN
DEFOAMER
This document is supplied solely for informational purposes and Newpark Drilling Fluids makes no guarantees or warranties, either expressed or implied,with respect to the accuracy and use of this data.
All product warranties and guarantees shall be governed by the General Terms and Conditions.