NORSOK INSTRUMENT DATASHEET X01Inclinometer RS-485
Tag number : TBA Range : [-90°, 90°] (referenced to
vertical)Service description : TBA Set/Alarm Point : No alarms
P&ID : TBA Area : TBALine/equipment no. : TBA P. O. Number :
TBA
1 GENERAL 5 QUALIFICATION1.01 Type : Inclinometer RS-485 5.01
Shock / vibration : According to ISO 13628-6 ch. 111.02
Manufacturer : Techni AS 5.02 Temperature : According to ISO
13628-6 ch. 111.03 Manufacturer model no : 5.03 EMC emission :
According to EN 50081-2:19931.04 Operating Temp. Limits : -10°C to
+55°C 5.04 EMC immunity : According to EN 50082-2:19951.05
Operating Press. Limit : N/A 5.05 External pressure rating : 300
bar, 3000 m waterdepth1.06 Size : WxDxH 140x160x250mm1.07 Mounting
: 13mm holes for M12 bolts
Bottom 4 holes, 110x110mm apart 6 MATERIALSBack 4 holes,
100x200mm apart 6.01 Housing material : Duplex
Other brackets can be supplied Other materials on requestupon
request.
1.08 Weight : 23.5 kg, incl. bracket 7 NOTES1.09 Connection :
Bennex MkII anguila interface 7.01 Units used for alignment of
drill-risers etc. 1.10 Pinout from penetrator : 1 - 24VDC When
using two units, they must be aligned in the
2 - 0VDC same direction, and must be installed with the same
starting tilt3 - RS-485 B (+) (near 0° in both X and Y).4 - RS-485
A (-) 7.02 Table Top simulator available for testing and
demonstration
purposes.
2 INSTRUMENT CHARACTERISTICS2.01 Nominal supply voltage :
24VDC2.02 Min. Supply voltage : 10VDC2.03 Max. Supply voltage :
30VDC2.04 Max. Current consumption : 15mA @ 24VDC
3 ANGULAR CHARACTERISTICS3.01 Accuracy [-20°,20°] :
