NS1000 V3.0 - CLIP Modification -

1

NS1000 V3.0

- CLIP Modification -

Rev1.1 Aug 6, 2013

2

Table of Contents

1. Overview of this section2. Function 3. How to program

3

Chapter 1Overview

4

1. OverviewAutomatic CLIP handling for productivity (smooth connectivity) Solution

CLIP Modification for call over QSIG networkFeatures and Benefits >>

Each extension can have 8 CLIPs then automatically select suitable one for each carrier in making a call.

* Features New for V3

When a PBX receives a call via QSIG, the PBX modifies received CLIP for call back. This feature is suite when 　 system located other country connected by QSIG

8 CLIPs for each Extension

5

Chapter 2Function

6

2-1. CLIP Modification for call over QSIG network

PSTN / ITSP

QSIG/E&M

Subscriber in Country BCLIP 820 9991234567

Country A(+810)

Country B(+820)

EXT201CLIP in Call Log001 820 9991234567

CLIP in Call Log001 820 9991234567

PSTN /ITSP

EXT101

CLIP Modification (for a call via QSIG)

When a PBX receives a call via QSIG, this PBX modifies received CLIP to enable to call back. This feature is suite when this QSIG connection is international.

820 9991234567 (CLIP ID) Edit CLIP ID

CLIP999 1234567

Edit CLIP ID

New!From V3

Call Back999 1234567

For Oversea CallNeed “001”

820 9991234567 (CLIP ID)

QSIG/E&M

No CLIP Modificationat relay point

PBXPBX PBX

7

2-2 8 CLIP-ID for each extension

Different CLIP for local call at each NS location

Carrier A(CLIPA)

CLIP1:092-477-0002….CLIP8:050-111-0002

<Case1> 050-111-0002

<Case2>092-477-0002

Ext1002

User can use different CLIP-ID for different carrier for different carrier

PBX

Carrier H(CLIPH)

Each Extension can have 8 CLIPs.

Condition1) Each Extension/PS can have Max. 8 different CLIPs.2) While ARS is not available, always CLIP-1 will be sent.3) CLIP Table Number is assigned for each carrier in ARS

. . .

8

Chapter 3Programing

9

CLIP Modification for call over QSIG network

10

3-1.CLIP Modification for call over QSIG network

Others,SIP GW(TDE)(Unknown)

ISDN/IPGW(Except Unknown)

SIP GW(International)

Delete +

Edit by total digits

Edit by Carrier Provided Information

Edit by Leading digits

Modified CLIP to call back

CLIP Modification flow

1st digit = ‘+’ ?remove ‘+’ then set as “International” otherwise set as “Unknown”

Edit by the logic programmed in 3.1.3 Caller ID Modification (Length of digits)Edit by the logic programmed in 3.1.3 Caller ID Modification (CLIP)

Edit by the logic programmed in 3.1.3 Caller ID Modification (Leading digits)

BRI(CO),PRI(CO), QSIG

CLIP Modification when PBX received a call (General)

E1, T1, SIPAnalog CO

SIP-GW/TDA50(Unknown)

Modify by number of digits *1:setting in TDA5450/not by System*2:modificationfor International call only

11


Programming 1/4

Step1: specify modification table # for each TRGStep2: define modification logic by total digits of CLIP IDStep3: define modification logic by carrier provided informationStep4: define modification logic by leading digits

Step1: specify modification table # for each TRG3.1.1. TRG Settings – Caller ID Modification Table

Set corresponding Table# for each TRG

Programming at PBX#1 and final destination PBX are done by same way.

12


Programming 2/4

Step2: define modification logic by total digits of CLIP ID3.1.3. Caller ID Modification – Length of Digits


Select Table#

CLIP

CLIP+

Modified CLIP

Additional digit

If the provided dial digits match this table, modify the digits otherwise does not modifyNote: 12 digits as International 8 digits as National call as default

add

13


Programming 3/4

Step3: define modification logic by carrier provided information3.1.3. Caller ID Modification – CLIP


Select Table#

CLIP

CLIP+

Modified CLIP

Additional digit

CLIP

remove

add

If Carrier provides these info, modify this table

Modified CLIP at step2

14


Programming 4/4

Step4: define modification logic by leading digits3.1.3. Caller ID Modification – Leading Digits


Select Table#

CLIP

CLIP

remove

add

CLIP+ Final CLIP ID

Leading digitsList

At here

Searching Leading digit to find corresponding logic to edit. (No match, no modify.)

Additional digit

Modified CLIP at step3

001

1It is necessary to add “011” here to avoid international number become “1011XXXXXXXXX”.

15


Example

Note: Step2 and step3 set up, are not used in this example. Only step4 is used.

001820001 0106

3

Sample1: Received CLIP with Long Distance digits, but PSTN does not need to dial.

Leading digit Match “001820”Remove 1st 6 digitsadd no dial

CLIP from QSIG: 001 820 999 1234567

Modified CLIP: 001 820 999 12345678

Sample2: Different prefix for international digits is required.

Leading digit Match “001”Remove 1st 3 digitsadd “010”

CLIP from QSIG: 001 8765 4321

Modified CLIP: 010 8765 4321

CIP Modification Table

16

More than 2 CLIP for EXT

17

Programming 1/2 – set max 8 CLIPs for each extension

3-2. More than 2 CLIP for EXT

4.1.7 CLIP ID Table (4.2.5 for PS)

4.1.1 Extension Settings – [CLIP]

Note: When modify CLIP1, then CLIP data on Extension will be changed automatically

Set CLIP for each extension (CLIP1 – CLIP8)

18

8.5 Carrier – [Carrier]

Set CLIP Table No. (1-8)

Programming 2/2 – set relation between Carrier and CLIP Table

3-2. More than 2 CLIP for EXT

When 20th digit of Carrier Name is ‘X’, Itemized Code is sent out as CLIP. (Higher priority than Clip table).

4.1.1 Extension Settings – [Option1]

ARS feature must be set

19

END

20

Modification

20130730-01 　 6 NS1000 V3.0 CLIP Modification_Rev1.0_30 Jul2013.pptx - 1st release

20130806-01 　 6 NS1000 V3.0 CLIP Modification_Rev1.1_06 Aug2013.pptx - Delete 010 from P6 between PBX1 and PBX2

Documents

NS1000 V3.0 - CLIP Modification -