Upload
ngohuong
View
219
Download
0
Embed Size (px)
Citation preview
0 970 L690 L500 L360 L
S.I.R. 1500
S.I.R. 2500
Hmtppe
40
22S.I.R. 1100
S.I.R. 900
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
SIR 900-1100
1
Lifting of muddied waste water containing faecal matter, industrial effluent, water containing fibre, tissue, straw, non metal-lic particles, sludge, rainwater or greasy wastewater from kitchens, wherever the discharge level is situated below the level of the sewer, or for transferring water to a distant or elevated treatment works.
• industrial sites,• farms,• slaughter-houses,• sports complexes,• hotels,• restaurant kitchens,• camp sites,• small rural communities,• housing estates.
OPERATING LIMITSUseful volume up to : S.I.R. 1100 500 L S.I.R. 0900 360 LAmbient temperature : 0 to + 50°CMax.fluid temperature : + 40°C*passing blade at : 6 mm Ø Inlet dia. : 150 mmDN Ø Outlet dia. : 1”1/2
Ø Vent dia.: 100 mm Ø Cable passage : 100 mm* (+60°C for 5 min)
APPLICATIONS
AdVANTAGES
• Completely sealed below the level of the inlet channel.• No holes in the bottom part of the tank.• Unbreakable tank, unaffected by acidic mixtures, bases, oil, milk or hydrocarbons.• Designed to resist to water pressure in the event of flooding thanks to its stabi-lising fins.• Standard version: 1 or 2 grinding pumps. • 2 pump version allowing automatic back-up in the event of breakdown of one of the pumps;cascade type operation of pumps in the event of increased flow.• Ecological, mercury free floaters, pear shaped to avoid snagging paper, fibre, fabric, etc. ; or air pressure switch• Lockable cover (protection of people).• Vent opening allowing the fitting of a carbon filter (not supplied).• Height of tank can be adjusted by adding an extension piece (plus replacement gasket not supplied) or by cutting back the specially designed upper section.• System allowing rapid installation and removal of pump(s)by means of a po-sitioning flange and a stainless steel chain.
INTERMEDIATE LIFTING STATIONS
Communal waste water50 Hz
N.T. No 145-10/ENG. - Ed. 3/05-08
• S.I.R. 1100 • S.I.R. 900 (cut-away section)
• S.I.R. 900 with cover
• Extension piece
stationépuration
atelier
Relevage - assainissement
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
| Modules eaux chargées
SIR 900-1100
2
dESIGNLifting stations comprising - 1 circular concave-bottomed tank with stabi-lising fins and 2 lifting rings,
- 1 cover with stainless steel safety locks (de-signed to resist “foot traffic” loading of 500 daN),
- 1 or 2 type SDLi pumps: 1 to 2,8 kW 230 V single-phase or 400V three-phase, 50 Hz (see special “SDLI” notice),
- Stainless steel discharge pipework with 1“1/2, DIN ISO 228/1-G1/2“ (DIN 2999) threads,
- 1 ball valve, 1 plug valve and 1 stainless steel lifting chain per pump,
- 1 float support and: S.I.R. 1 pump :- 3 NIVOSTABLE 430 floats ; or 1 I.P.A.E.- a Yn 4100 or YN 5100E control box- 1 fault management board.
S.I.R. 2 pumps :- 4 NIVOSTABLE 430 floats ; or 1 I.P.A.E. - a Yn 4100 or YN 5100E control box,- 1 fault management board.2 possibilities of connection to inlet pipe forS.I.R.900 Nom dia.150; 4 possibilities for S.I.R.1100 Nom dia.150.- Comply with EN 60335 ; EN 50 081-1;EN 50 082-2.
STANDARD CONSTRUCTIONStandard material : MDPE 8 mm
Medium Density Polyethylene
STATION IdENTIFICATION• SINGLE PUMP VERSION :
S.I.R. 900 / 1 SDLi204-2.8T4
Intermediate lifting station
900 L tank
1 pump
Type of pump
• SINGLE OR DOUBLE PUMP VERSION:
1 S.I.R. 1100 / 2 SDLi204-1.3T4
Intermediate lifting station
1100 L tank
1 or 2 pumps
Type of pump(s)
PRINCIPLE OF INSTALLATION
1
10
9
4
2
8
12
14
7
13
11
5
6
15
5
6
13
3
16
16
1
10
9
4
2
8
12
14
7
13
11
5
6
15
5
6
13
3
16
16
1
10
9
4
32
8
12
14
7
135
11
6
15
3
5
13
5
3
16
16
1
10
9
4
32
8
12
14
7
135
11
6
15
3
5
13
5
3
16
16
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
SIR 900-1100
3
STATIONS dESCRIPTION• S.I.R. 900
• S.I.R. 1100 - double pump version
01 – Tank.02 – Central support.03 – Fixed 40 nom. dia. coupling04 – Non-return valve.05 – Isolating valve.06 – Tee adapter plug07 – Tee adapter for attaching rinsing hose.08 – Support bar.09 – Lifting chain.10 – Chain support.11 – Gasket.12 – Stainless steel discharge pipe (1).13 – Stainless steel discharge pipe (2).14 – SDLI pump(s).15 – Cover16 – Floats.
0,5
0
0 0,2 0,4 0,6 0,8
0,5 1 1,5
100330
200660
300990
0 1 1,5 2 2,5
Nom
bre
de lo
gem
ents
Equi
vale
nt h
abita
nts
Volu
me
utile
en
m3
80 L/équ./j125 L/équ./j150 L/équ./j200 L/équ./j250 L/équ./j300 L/équ./j
= 6 démarrages/h= 10 démarrages/h= 20 démarrages/h
A
B
C
ABC
S.I.R. 900
S.I.R. 1100
0
4
8
12
16
20
24
28
32
36
0
1
2
SDL i 204/2,8T4
SDL i 204/2,8T4
SDL i 204/2,5T4
SDL i 204/2,5T4
SDL i 204/2,2T4
SDL i 204/2,2T4
SDL i 204/1,5T4
SDL i 204/1,5T4
SDL i 204/1,3T4
SDL i 204/1,3T4
SDL i 204/1,1T4
SDL i 204/1,1T4
161412108642
0 300
54321
Qm 3/h
Hm Hft
P2 kW
Imp.gpm
Ql/minQl/s
SDL - i50Hz
2 4 6 8 10 12 14 16 18
604020
100
120
80
60
40
20
0
200100
Relevage - assainissement
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
| Modules eaux chargées
SIR 900-1100
4
INTERMEDIATE LIFTING STATION SELECTION CHART
HYDRAULIC PERFORMANCES
The following values are generally deemed to apply : 80 l/head/day for lower class rural housing 125 l/head/day for higher class rural housing 150 l/head/day for small middle class
communities 200 l/head/day for small towns of more than
10 000 inhabitants 250 l/head/day for small towns of more than
50 000 inhabitants 300 l/head/day for small towns of more than
150 000 inhabitants.
Hydraulic perfomances at 2 900 rpm for a pump in
operation.
Take into account theloss of head due to : • pipes, • bends, • valves, • flaps…
inha
bitants eq
uivalent
Numbe
r of lod
ging
s
starting/h
80 L/Head/day125 L/Head/day150 L/Head/day200 L/Head/day250 L/Head/day300 L/Head/day
Volume us
e in m
3
starting/hstarting/h
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
SIR 900-1100
5
dIMENSIONS• S.I.R. 900
• S.I.R. 1100 - single pump version
YN 4000 BOxES• Yn 4100 (single pump version)
• Yn 4200 (double pump version). Supplied with the module .
Functions Ensures fully automated operation of the station and thermal protection of the pumps : - direct start-up, - automatic pump switching (Yn 4200), - Integrated sound alarm and fault relay.Control panel
Front panel features - General safety switch.- Indicator lights : • power on, • pump running, • fault (pump), • direction of rotation detector.- 3 way switch: • temporary manual operation, • stop, • automatic.
Dimensions Yn 4100 Yn 4200
Height 255 mm 335 mmLength 320 mm 400 mmDepth 140 mm 140 mmMass 3,7 kg 5,9 kgProtection IP 54 IP 54See special Yn4000 information sheet.
REFERENCECOMMANdE
Tensionaliment.
P.moteur
Intensitéabs.
Effluentsentrée
Øsortie
Masseévent câble
V kW A DN DN mm mm kgS.I.R.900/1SDLI204-1T4 3x400 1 2,5 150 1”1/2 100 100 121S.I.R.900/1SDLI204-1,3M 1x230 1,3 9,5 150 1”1/2 100 100 125,5S.I.R.900/1SDLI204-1,3T4 3x400 1,3 3,1 150 1”1/2 100 100 125S.I.R.900/1SDLI204-1,4T4 3x400 1,4 3,5 150 1”1/2 100 100 126S.I.R.900/1SDLI204-2,1T4 3x400 2,1 4,4 150 1”1/2 100 100 131S.I.R.900/1SDLI204-2,5T4 3x400 2,5 5,8 150 1”1/2 100 100 132S.I.R.900/1SDLI204-2,8T4 3x400 2,8 6,3 150 1”1/2 100 100 133S.I.R.1100/1SDLI204-1T4 3x400 1 2,5 150 1”1/2 100 100 143S.I.R.1100/1SDLI204-1,3M 1x230 1,3 9,5 150 1”1/2 100 100 147,5S.I.R.1100/1SDLI204-1,3T4 3x400 1,3 3,1 150 1”1/2 100 100 147S.I.R.1100/1SDLI204-1,4T4 3x400 1,4 3,5 150 1”1/2 100 100 148S.I.R.1100/1SDLI204-2,1T4 3x400 2,1 4,4 150 1”1/2 100 100 153S.I.R.1100/1SDLI204-2,5T4 3x400 2,5 5,8 150 1”1/2 100 100 154S.I.R.1100/1SDLI204-2,8T4 3x400 2,8 6,3 150 1”1/2 100 100 155S.I.R.1100/2SDLI204-1T4 3x400 1 2x2,5 150 1”1/2 100 100 164S.I.R.1100/2SDLI204-1,3M 1x230 1,3 2x9,5 150 1”1/2 100 100 168,5S.I.R.1100/2SDLI2041,3T4 3x400 1,3 2x3,1 150 1”1/2 100 100 168S.I.R.1100/2SDLI204-1,4T4 3x400 1,4 2x3,5 150 1”1/2 100 100 169S.I.R.1100/2SDLI204-2,1T4 3x400 2,1 2x4,4 150 1”1/2 100 100 174S.I.R.1100/2SDLI204-2,5T4 3x400 2,5 2x5,8 150 1”1/2 100 100 175S.I.R.1100/2SDLI204-2,8T4 3x400 2,8 2x6,3 150 1”1/2 100 100 176
Relevage - assainissement
Adduction- surpression
Sommaire
Rappels techniques
Pompes de surface
Pompes immergées
Modules de surpression
Relevage - assainissement
Sommaire
Rappels techniques
Pompes eaux claires
Pompes eaux chargées
Pompes dilacératrices
Modules eaux claires
Modules eaux chargées
Genie - climatique
Sommaire
Rappels techniques
Raccordement des circulateurs
Circulateurs à rotor noyé
Pompes à rotor sec
Modules
Eau chaude sanitaire
Pompes process
Équipements
Sommaire
Dispositifs de commande
Dispositifs d’alarme
Réservoirs
Équipements pompes immergées
| Modules eaux chargées
SIR 900-1100
6
ELECTRICAL dATA ANd dIMENSIONS• S.I.R. 1100 - double pump version
FEATURESa) Electrical- 230 volt single/400 volt 3-phase 50Hz,- Motor protection by means of Yn4100 or Yn4200 box.
b) Installation- The box must be installed in a room or exter-nally under an accessible, rigid, water-tight vandal-proof enclosure.
- The station is designed to be able to be pla-ced in green areas. Provide a safety barrier around the cover.
Comply with applicable standards when installing the station within a roadway or pavement,and provide an inspection pit with a high strength manhole cover.
RecommendationProvide a sand trap before the station inlet where effluent contains a lot of sand and heavy particles, and a grease trap where the water is greasy.
c) Packaging- Station delivered on 2 pallets ready for ins-tallation, together with instructions for putting into operation. One pallet with the station, the other with the control box and the pumps(s) and accessories.
d) Maintenance- Replacement of spare pump parts or kits containing a number of spare parts :
- Mechanical seal kit, please contact us.
additional order reference numbers Yn 4000 :
Current rangein A
Control box referenceYn 41001 PUMP
Yn 42002 PUMPS
1,6 to 050 (Yn4105) 4035801 (Yn4205) 40358033,7 to 12 (Yn4112) 4035802 (Yn4212) 4035804
- I.P.A.E : 2519921 - 2519922 - 2519923 (+YN 5000E)
- NIVOSTABLE 430 (10m) : 4027319- Fault management board for connection of 2 sensors per pump : 4033562
OPTIONSand recommended accessories • Flexible connection (not supplied).• Carbon filter (not supplied).• Replacement gasket (not supplied).• Tank extension piece : 2506431.
ORdER REFERENCE Supplyvoltage
Motor p. rating
Abs.current
Nominalinlet Ø
Nominaloutlet Ø
MassVent Ø cable
V kW A ND ND mm mm kg