Pneumatik Flex

1 48

1.1. CREVA ZA HIDRAULIKU / HYDRAULIC HOSES

1.1.1. HIDRAULIKA - NISKI PRITISAK / HYDRAULIC HOSES - LOW PRESSURE

M bez opleta spolja / uncovered Mt spoljni oplet tekstilom / covered with one textile braid M spoljni oplet elinom pocinkovanom icom / coverd with Mts spoljni tekstilni oplet / coverd with one textil braidM

Unutranji sloj / Tube: uljno otporna sintetika guma / Oil resistant synthetic rubber tube

Ojaanje / Reinforcement: jedan sloj tekstilnog opleta / one textile braid

Spoljanja guma / Cover: sintetika guma otporna na atmosferilije i ozon / Oil, weather and ozone resistant synthetic rubber cover

Temperatura primene / Temperature range: -400C do/to +1000C kratkotrajno do / with peaks up to: +1250C

Primena / Applications: protok ulja mineralnog porekla, emulzije vode i ulja, vodeni rastvori glikola / with petroleum based hydraulic fluids, water-glycol and water-oil emulsion hydraulic fluids

Spoljni prenik / O.D.

NP (nazivni prenik) /

DN

Unutr. prenik / I.D. M Mt, M Mts

Max. radni pritisak /

Max. working pressure

Min. pritisak rasprsk / Min. burst pressure

Min. radijus savijanja / Min. bend

radius

Teina / Weight

Oznaka / Part

Number mm bar mm kg/m

M - 4 4 4.8 11.1 12.8 12.8 34 138 51 0.10M - 6 6 6.4 12.7 14.3 14.3 28 110 64 0.12M - 8 8 7.9 14.3 15.8 15.8 28 110 76 0.14

M - 10 10 9.5 15.9 17.3 17.3 28 110 76 0.16 M - 13 13 12.7 19.8 21.3 21.3 28 110 102 0.23 M - 16 16 15.9 23.0 24.5 24.5 24 97 127 0.28 M - 20 20 19.0 27.0 28.5 28.5 21 83 152 0.41 M - 25 25 25.4 34.2 35.7 35.7 18 72 180 0.61 M - 32 32 31.8 41.0 42.5 - 15 60 230 0.69

1.1.2. HIDRAULIKA - SREDNJI PRITISAK / HYDRAULIC HOSES - MEDIUM PRESSURE

H bez opleta spolja / uncovered Ht spolja oplet tekstilom / covered with one textile braid H spoljni oplet elinom pocinkovanom icom / coverd with H

Unutranji sloj / Tube: uljno otporna sintetika guma / Oil resistant syntetic rubber tube

Ojaanje / Reinforcement: dva sloja tekstilnog opleta, unakrsno / two textile braids


Temperatura primene / Temperature range: -400C do/to 1000C kratkotrajno do / with peaks up to: +1250C

Primena / Applications: protok ulja mineralnog porekla, emulzije vode i ulja, vodeni rastvori glikola / with petroleum based hydraulic fluids, water-glycol and water-oil emulsion hydraulic fluids


NP (nazivni prenik) / DN

Unutr. prenik / I.D. H Ht, H



Min. pritisak rasprsk / Min.

burst pressure


radius

Teina / Weight Oznaka / Part

Number

mm bar mm kg/m H - 4 4 4.8 12.7 14.3 103 414 76 0.14H - 6 6 6.4 14.3 15.8 86 345 76 0.15H - 8 8 7.9 17.5 19.3 83 331 102 0.23

H - 10 10 9.5 19.0 20.6 78 310 102 0.27 H - 13 13 12.7 23.8 25.3 69 276 127 0.39 H - 16 16 15.9 27.0 28.5 60 241 140 0.44 H - 20 20 19.0 31.7 33.3 52 207 152 0.62 H - 25 25 25.4 38.1 39.6 39 155 203 0.90 H - 32 32 31.8 44.4 45.9 26 103 254 0.96

2 48

1.1.3. HIDRAULIKA - VISOKI PRITISAK / HYDRAULIC HOSES - HIGH PRESSURE

EN 853 - 1SN DIN 22 022 - 1SN SAE 100 R1 AT V1

Unutranji sloj / Tube: Uljno otporna sintetika guma / Oil resistant synthetic rubber tube

Ojaanje / Reinforcement: jedan sloj opleta eline ice / one braid of high tensile steel wire


Temperatura primene / Temperature range: -400C do/to +1000C

Primena / Applications: protok hidraulunih tenosti,ulja mineralnog porekla, emulzije vode i ulja, vodeni rastvori glikola / high pressure service with petroleum based hydraulic fluids, water-glycol and water-oil emulsion hydraulic fluids


Unutr. prenik / I.D.


Max. radni pritisak / Max.

working pressure



radius


Number

mm bar mm kg/m V1 NP5 5 4.8 12.7 250 1000 90 0.25V1 NP6 6 6.4 13.4 225 900 100 0.24V1 NP8 8 7.9 15.0 215 860 115 0.27

V1 NP10 10 9.5 17.4 180 720 130 0.34 V1 NP13 13 12.7 20.7 160 640 180 0.43 V1 NP16 16 15.9 23.9 130 520 200 0.49 V1 NP20 20 19.0 27.8 105 420 240 0.63 V1 NP25 25 25.4 35.8 88 350 300 0.94 V1 NP32 32 31.8 44.8 63 250 420 1.19 V1 NP40 38 38.1 52.0 50 200 500 1.57 V1 NP50 50 50.8 65.9 40 160 630 2.21

1.1.4. HIDRAULIKA - VISOKI PRITISAK / HYDRAULIC HOSES - HIGH PRESSURE

EN 853 - 2SN ISO S 1436/IIDIN 22 022 - 2SN SAE 100 R2 ATV2

Unutranji sloj / Tube: Uljno otporna sintetika

guma / Oil resistant syntetic rubber tube Ojaanje / Reinforcement: dva sloja unakrsno

opletene eline ice / two braids of high tensile steel wire


Temperatura primene / Temperature range: -400C do/to 1000C






working pressure



radius


Number

mm bar mm kg/m V2 NP5 5 4.8 15.9 415 1650 90 0.36V2 NP6 6 6.4 15.0 400 1600 100 0.39V2 NP8 8 7.9 16.6 350 1400 115 0.42

V2 NP10 10 9.5 19.0 330 1320 130 0.55 V2 NP13 13 12.7 22.2 275 1100 180 0.67 V2 NP16 16 15.9 25.4 250 1000 200 0.77 V2 NP20 20 19.0 29.3 215 860 240 1.00 V2 NP25 25 25.4 38.1 165 660 300 1.49 V2 NP32 32 31.8 47.5 125 500 420 1.73 V2 NP40 38 38.1 55.0 90 360 500 2.14 V2 NP50 50 50.8 67.0 80 320 630 2.96

3 48

1.1.5. HIDRAULIKA - VRLO VISOKI PRITISAK / HYDRAULIC HOSES - ULTRA HIGH PRESSURE

DIN 22 023 - 4SP V3


Ojaanje / Reinforcement: tri sloja unakrsno opletene eline ice / tree braids of high tensile steel wire

Spoljanja guma / Cover: sintetika guma otporna na ulja, starenje i habanje / Oil, weather and abrasion resistant synthetic rubber cover







working pressure



radius


Number

mm bar mm kg/m V3 NP10 10 9.5 21.4 450 1800 120 0.73V3 NP13 13 12.7 24.6 415 1660 160 0.90V3 NP16 16 15.9 28.2 350 1400 210 1.09V3 NP20 20 19.1 32.2 350 1400 260 1.36V3 NP25 25 25.4 39.7 280 1120 310 1.78V3 NP32 32 31.8 50.3 210 840 410 2.13


EN 856 - 4SP DIN 22 023 - 4SP

V4 SP

Unutranji sloj / Tube: Uljno otporna sintetika guma / Oil resistant syntetic rubber tube

Ojaanje / Reinforcement: etiri sloja unakrsno opletene eline ice / four braids of high tensile steel wire








working pressure



radius


Number

mm bar mm kg/m V4 SP NP6 6 6.4 17.8 450 1800 150 0.615

V4 SP NP10 10 9.5 21.4 445 1780 180 0.78 V4 SP NP13 13 12.7 24.6 415 1660 230 0.93 V4 SP NP16 16 15.9 28.2 350 1400 250 1.15 V4 SP NP20 20 19.1 32.2 350 1400 300 1.58 V4 SP NP25 25 25.4 39.7 280 1120 340 2.04 V4 SP NP32 32 31.8 50.3 210 840 460 3.32 V4 SP NP40 38 38.1 56.7 185 740 560 3.70 V4 SP NP50 50 50.8 70.6 165 660 660 5.14

4 48


DIN 22 023 - 4SP V3


Ojaanje / Reinforcement: tri sloja unakrsno opletene eline ice / tree braids of high tensile steel wire








working pressure



radius


Number

mm bar mm kg/m V3 NP10 10 9.5 21.4 450 1800 120 0.73V3 NP13 13 12.7 24.6 415 1660 160 0.90V3 NP16 16 15.9 28.2 350 1400 210 1.09V3 NP20 20 19.1 32.2 350 1400 260 1.36V3 NP25 25 25.4 39.7 280 1120 310 1.78V3 NP32 32 31.8 50.3 210 840 410 2.13


EN 856 - R13 SAE 100 R13

V6

Unutranji sloj / Tube: Uljno otporna sintetika guma / Oil resistant syntetic rubber tube

Ojaanje / Reinforcement: od NP25, etiri sloja unakrsno opletene eline ice, a od NP32 na vie, est slojeva / four braids of high tensile steel wire up to DN32:six braids








working pressure



radius


Number

mm bar mm kg/m V6 NP6 6 6.4 20.6 776 3103 127 0.92

V6 NP10 10 9.5 23.8 690 2758 152 1.12 V6 NP13 13 12.7 27.0 517 268 200 1.36 V6 NP20 20 19.1 32.6 345 1380 240 1.65 V6 NP25 25 25.4 39.2 345 1380 300 2.26 V6 NP32 32 31.8 50.4 345 1380 420 3.69 V6 NP40 38 38.1 57.9 345 1380 500 4.79 V6 NP50 50 50.8 71.9 345 1380 630 7.48

5 48


VB6


Ojaanje / Reinforcement: 4 - 6 slojeva unakrsno opletene eline ice / 4 - braids of high tensile steel wire








working pressure



radius


Number

mm bar mm kg/m VB6 - 6 6 6.5 20.6 1000 2800 100 0.85

VB6 - 10 10 9.5 24.4 1000 2800 130 1.20 VB6 - 13 13 13.0 26.1 1000 2800 200 1.25 VB6 - 19 19 19.0 34.4 1000 2800 250 2.50 VB6 - 25 25 25.0 41.4 800 2240 300 3.20


VW

Unutranji sloj / Tube: Glatka crna sintetika guma / Smooth black syntetic rubber tube

Ojaanje / Reinforcement: tekstilni oplet velike jaine / high tensile textile braid

Spoljanja guma / Cover: sintetika guma visoko otporna na starenje i habanje / Weather and abrasion high-resistant synthetic rubber cover


Primena / Applications: ispiranje kanala i cevi pod visokim pritiskom / hydrodynamic cleaning of sewers





working pressure



radius


Number

mm bar mm kg/m VW - 13 13 13.0 25.6 200 1000 500 0.46 VW - 19 19 19.0 31.6 200 1000 500 0.62 VW - 25 25 25.0 39.3 200 1000 500 0.92

6 48

1.2.1. CREVA ZA NAFTU I NAFTNE DERIVATE / OIL AND FUEL HOSES

1.2.1.1. CREVA ZA PROTOK TENIH GORIVA / LIQUID FUEL HOSES

G bez opleta spolja / uncovered Gt spoljni oplet tekstilom / covered with one textile braid G spoljni oplet elinom pocinkovanom icom / coverd with one steel braid

G

Gumena creva izraena od kvalitetne sintetike gume / Syntetic rubber hoses


Primena / Applications: protok tenih goriva kod motornih vozila / suitable for delivery of fuel





working pressure



radius

Teina / Weight Oznaka / Part Number

mm bar mm kg/m G - 4 4 4.8 10 8 40 45 0.15 G - 6 6 6.4 12 6 30 55 0.20 G - 8 8 7.9 14 6 30 65 0.235

G - 10 10 9.5 16 5 25 75 0.305 G - 13 13 12.7 20 5 25 95 0.41 G - 16 16 15.9 24 4 20 100 0.74 G - 20 20 19.0 28 4 20 105 0.58 G - 25 25 25.4 33 4 20 110 0.80

1.2.1.2. CREVA ZA TOENJE GORIVA NA BENZINSKIM PUMPAMA / HOSES FOR DISPENSING METERED QUANTITIES

OF AUTOMATIC FUELS FROM DISPENSING EQUIPMENT (petrol pumps)

BP

Prema / according to: EN 1360 Type 1

Unutranji sloj / Tube: Crna guma, elektroprovodljiva / Black smooth rubber, antistatic (R < 1M/m)

Ojaanje / Reinforcement: sintetiki tekstilni oplet i bakarna nit / synthetic textile yarns providing low dilatation. Built-in copper wires to allow electrical continuality between fittings

Spoljanja guma / Cover: elektroprovodljiva guma otporna na ulja, goriva, starenje i habanje / antistatic rubber resistant to weather, oil and fuels (R < 1M/m)


Primena / Applications: protok goriva na benzinskim pumpama. Otporna na bezolovna goriva sa dodacima olova, kao i dizela sa max. sadrajem aromata od 50% / designed for dispensing metered quantities of automatic fuels from dispensing equipment (petrol pumps)





working pressure



radius


mm bar mm kg/m BP - 16 16 15.9 26 16 48 80 0.44 BP - 19 19 19.0 31 16 48 95 0.61 BP - 25 25 25.4 38 16 48 125 0.83

7 48

1.2.1.3. CREVA ZA PRETAKANJE IZ AUTOCISTERNI - POTISNA / HOSES FOR DELIVERY OF PETROLEUM PRODUCTS

ND-10

Unutranji sloj / Tube: Crna guma, otporna na ulja i

goriva / Black smooth rubber, resistant to oil and fuel Ojaanje / Reinforcement: sintetiki tekstilni opleti i

bakarna nit / synthetic textile yarns providing low dilatation. Built-in copper wires to allow electrical continuality between fittings

Spoljanja guma / Cover: elektroprovodljiva guma otporna na ulja, goriva, starenje i habanje / antistatic rubber resistant to abrasion, oil, fuel and weathering


Primena / Applications: protok nafte i derivata prilikom pretovara u i iz cisterni. Otporna na mineralne proizvode sa max. sadrajem aromata od 50% / designed for dimetered products with an aromatic content not exceeding 50%





working pressure



radius


Number

mm bar mm kg/m ND-10-25 25 25 35 10 30 250 0.64ND-10-32 32 32 45 10 30 320 1.09ND-10-38 38 38 51 10 30 380 1.25 ND-10-50 50 50 64 10 30 500 1.72 ND-10-75 75 75 91 10 30 750 2.79 ND-10-100 100 100 116 10 30 1000 3.61

1.2.1.4. CREVA ZA PRETAKANJE IZ AUTOCISTERNI - POTISNA / HOSES FOR DELIVERY OF PETROLEUM PRODUCTS

ND-16

Unutranji sloj / Tube: Crna guma, otporna na ulja i

goriva / Black smooth rubber, resistant to oil and fuel Ojaanje / Reinforcement: sintetiki tekstilni opleti i bakarna nit / synthetic textile

yarns providing low dilatation. Built-in copper wires to allow electrical continuality between fittings








working pressure



radius


Number

mm bar mm kg/m ND-16-19 19 19 31 16 64 125 0.60ND-16-25 25 25 37 16 64 150 0.89ND-16-32 32 32 44 16 64 175 1.00ND-16-38 38 38 51 16 64 225 1.30ND-16-50 50 50 66 16 64 275 2.00ND-16-75 75 75 91 16 64 350 2.80

ND-16-100 100 100 116 16 64 450 3.80

8 48

1.2.1.5. CREVA ZA PRETAKANJE IZ AUTOCISTERNI - USISNO - POTISNA / HOSES FOR DELIVERY OF MINERAL OILS AND FUELS

ND-UP-10

Unutranji sloj / Tube: Crna guma, otporna na ulja i goriva / Black smooth rubber, resistant to oil and fuel

Ojaanje / Reinforcement: sintetiki tekstilni opleti i bakarna nit / synthetic textile yarns providing low dilatation. Built-in copper wires to allow electrical continuality between fittings








working pressure



radius


Number

mm bar mm kg/m ND-UP10-19 19 19 29 10 30 120 0.61 ND-UP10-25 25 25 35 10 30 150 0.80 ND-UP10-32 32 32 42 10 30 190 0.98 ND-UP10-38 38 38 48 10 30 240 1.13 ND-UP10-50 50 50 60 10 30 300 1.46 ND-UP10-75 75 75 87 10 30 450 2.68 ND-UP10-100 100 100 114 10 30 600 4.02

9 48

1.2.2. CREVA ZA GAS / GAS HOSES

1.2.2.1. CREVA ZA GASNE INSTALACIJE / HOSES FOR GASINSTALATION

GZ1 GZ1 spolja opleteno elinom

pocinkovanom icom / covered with one steel braid

JUS G.C6.031 GZ1

Unutranji sloj / Tube: Crna sintetika guma / Black synthetic rubber

Ojaanje / Reinforcement: Jedan sloj unakrsnog opleta / one textile braid

Spoljanja guma / Cover: Sintetika guma otporna na atmosferilije i ozon / Synthetic rubber resistant to weathering and ozone


Primena / Applications: Za gasne instalacije propan-butan, zemni i gradski gas / For delivery of butane, propane and gases for domestic

NP (nazivni

prenik) / DN Unutr. prenik

/ I.D. Spoljni prenik /

O.D.

GZ1 GZ1


working pressure



radius


Number

mm bar mm kg/m GZ1 - 6 6 6.3 14.5 15.8 2 15 21.5 0.15 GZ1 - 8 8 8.0 16.0 17.5 2 15 24.0 0.18

GZ1 - 10 10 10.0 18.0 19.5 2 15 27.0 0.23

1.2.2.2. CREVA ZA GASNE INSTALACIJE / HOSES FOR GASINSTALATION

GZ2

GZ2 GZ2 spolja opleteno elinom pocinkovanom

icom / covered with one steel braid JUS G.C6.031


Ojaanje / Reinforcement: Jedan ili dva sloja unakrsnog tekstilnog opleta / one or two textile braids



Primena / Applications: Za gasne instalacije propan-butan, zemni i gradski gas / For delivery of butane, propane and gases for domestic




GZ2 GZ2


working pressure



radius


Number

mm bar mm kg/m GZ2 - 6 6 6.3 14.3 15.8 25 75 21.5 0.15 GZ2 - 8 8 8.0 18.0 19.5 25 75 27.0 0.24

GZ2 - 13 13 13.0 23.8 - 25 75 100.0 0.44 GZ2 - 16 16 16.2 27.0 - 25 75 130.0 0.51

10 48

1.2.2.3. CREVA ZA TEHNIKE GASOVE / WELDING GAS HOSES

EN 559 GV


Ojaanje / Reinforcement: Jedan sloj unakrsnog tekstilnog opleta / one textile braid



Primena / Applications: Za tehnike gasove: acetilen, kiseonik i druge tehnike gasove / For technical gases: acetylene, oxygen and allied

NP (nazivni prenik) /

DN







radius


mm bar mm kg/m GV-A - 4 GV-O - 4 4 4 11 20 60 40 0.11 GV-A - 5 GV-O - 5 5 5 12 20 60 40 0.13 GV-A - 6 GV-O - 6 6 6 13 20 60 40 0.15 GV-A - 8 GV-O - 8 8 8 15 20 60 40 0.17 GV-A - 9 GV-O - 9 9 9 16 20 60 45 0.19

GV-A - 10 GV-O - 10 10 10 17 20 60 50 0.20

1.2.2.4. CREVA ZA TENI GAS / LIQUID GAS HOSES

GPL


Ojaanje / Reinforcement: Dva sloja elinog opleta / Two braids of high tensile steel wire

Spoljanja guma / Cover: Crna guma, perforirana, otporna na ulja, habanje i starenje / Black, synthetic rubber compound pin-pricked resistant to oil, weathering and ozone


Primena / Applications: Za protok tenih gasova (metan, propan, butan, zemni i gradski gas) za pretovar cisterni / Liquid gas applications (methane, propane, LPG) in the loading and unloading of tanks





working pressure



radius


Number

mm bar mm kg/m GPL - 6 6 6.2 18.3 50 200 55 0.43GPL - 8 8 7.7 19.8 50 200 65 0.50

GPL - 10 10 9.3 22.2 50 200 80 0.59 GPL - 13 13 12.3 25.4 50 200 100 0.72 GPL - 16 16 15.5 28.6 50 200 125 0.82 GPL - 19 19 18.6 32.5 50 200 160 1.05 GPL - 25 25 25.0 40.9 50 200 200 1.40 GPL - 32 32 31.4 52.4 50 120 250 2.20 GPL - 38 38 37.7 58.7 50 120 320 2.45 GPL - 51 51 50.4 71.4 50 120 400 3.13

11 48

1.2.2.5. CREVA ZA PUMPE ZA TENI AUTO - GAS / LIQUID AUTOGAS HOSES

EN 1762 GA

Unutranji sloj / Tube: Crna sintetika guma / Black

synthetic rubber Ojaanje / Reinforcement: Sintetiko, tekstilno

pletivo, spirala od eline ice i bakarna nit za elektroprovodljivost / synthetic textile fabrics, embeded built-in copper wire to faciliate electrical conection between hose and the end complings

Spoljanja guma / Cover: Crna sintetika antistatina (R < 1M/m) otporna na ulja habanje i starenje / Black synthetic rubber, compound pin-pricked, resistant to weathering and ozone


Primena / Applications: Protok tenih gasova na pumpama (LPG, metan, propan, butan, zemnih i gradskih gasova) i za pretovar cisterni / Liquid gas applications (methane, propane, LPG) and for loading and unloading of tanks





working pressure



radius


Number

mm bar mm kg/m GA - 19 19 18.6 31 25 100 100 0.80 GA - 25 25 25.0 38 25 100 150 1.00 GA - 32 32 31.4 45 25 100 200 1.25 GA - 38 38 37.7 52 25 100 280 1.60 GA - 50 50 50.0 66 25 100 350 2.35 GA - 51 51 50.4 67 25 100 350 2.38

12 48

1.2.3. CREVA ZA VODU / WATER HOSES

1.2.3.1. CREVA ZA VODU - POTISNA / WATER HOSES - DELIVERY WP - 5 Radni pritisak 5 bar / working pressure 5 bar WP - 6 Radni pritisak 6 bar / working pressure 6 bar

WP - 10 Radni pritisak 10 bar / working pressure 10 bar WP - 20 Radni pritisak 20 bar / working pressure 20 bar WP


Ojaanje / Reinforcement: Sintetiko tekstilno pletivo, / synthetic textile fabrics

Spoljanja guma / Cover: Crna sintetika guma otporna na habanje i starenje / Black synthetic rubber, resistant to weathering and ozone


Primena / Applications: Protok vode i manje agresivnih tenosti / For water and less aggressive liquids





working pressure



radius


Number

mm bar mm kg/m WP-6 - 8 8 8 13 6 18 50 0.12WP-6 - 10 10 10 15 6 18 60 0.14WP-6 - 12 12 12 17 6 18 70 0.17WP-6 - 15 15 15 21 6 18 90 0.25WP-6 - 18 18 18 25 6 18 110 0.35WP-6 - 20 20 20 28 6 18 120 0.46WP-6 - 22 22 22 30 6 18 130 0.49WP-6 - 25 25 25 33 6 18 150 0.54WP-5 - 60 60 60 66 5 15 - 0.83WP-5 - 70 70 70 76 5 15 - 0.96WP-5 - 75 75 75 82 5 15 - 1.21WP-5 - 80 80 80 87 5 15 - 1.29WP-5 - 90 90 90 97 5 15 - 1.44WP-5 - 100 100 100 107 5 15 - 1.58WP-5 - 120 120 120 127 5 15 - 1.88WP-10 - 5 5 5 10.5 10 30 30 0.10WP-10 - 6 6 6 13 10 30 40 0.16WP-10 - 8 8 8 15 10 30 50 0.19WP-10 - 10 10 10 17 10 30 60 0.22WP-10 - 12 12 12 19 10 30 70 0.26WP-10 - 15 15 15 23 10 30 90 0.36WP-10 - 19 19 19 29 10 30 110 0.57WP-10 - 25 25 25 34 10 30 250 0.63WP-10 - 32 32 32 44 10 30 320 1.07WP-10 - 38 38 38 52 10 30 380 1.46WP-10 - 42 42 42 56 10 30 420 1.59WP-10 - 50 50 50 68 10 30 500 2.49WP-10 - 60 60 60 82 10 30 600 3.63WP-10 - 75 75 75 98 10 30 750 4.55WP-10 - 100 100 100 125 10 30 1000 6.33WP-10 - 125 125 125 145 10 30 1250 5.64WP-10 - 150 150 150 174 10 30 1500 8.29WP-20 - 6 6 6 14 20 60 40 0.19WP-20 - 8 8 8 17 20 60 50 0.27WP-20 - 10 10 10 19 20 60 60 0.31WP-20 - 12 12 12 21 20 60 70 0.35WP-20 - 15 15 15 25 20 60 90 0.47WP-20 - 19 19 19 30 20 60 110 0.64WP-20 - 25 25 25 37 20 60 150 0.88WP-20 - 50 50 50 58 20 60 - 0.94WP-20 - 60 60 60 68 20 60 - 1.10WP-20 - 80 80 80 91 20 60 - 2.05WP-20 - 100 100 100 113 20 60 - 2.97WP-20 - 120 120 120 133 20 60 - 3.52

13 48

1.2.3.2. CREVA ZA VODU - USISNO - POTISNA / WATER HOSES - SUCTION AND DELIVERY WUP - 5 Radni pritisak 5 bar / Working pressure 5 bar WUP - 10 Radni pritisak 10 bar / Working pressure 10 bar WUP


Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo, spirala od eline ice / synthetic textile fabrics

Spoljanja guma / Cover: Crna sintetika guma otporna na habanje i starenje / Black synthetic rubber, resistant to abrasion and weathering


Primena / Applications: Usisno-potisno za protok vode i manje agresivne tenosti / Suction and delivery of water and less agresive liquids





working pressure



radius


Number

mm bar mm kg/m WUP-5 - 60 60 60 70 5 15 360 1.78 WUP-5 - 70 70 70 81 5 15 420 2.35 WUP-5 - 75 75 75 86 5 15 450 2.56 WUP-5 - 80 80 80 91 5 15 480 2.82 WUP-5 - 90 90 90 102 5 15 540 3.38 WUP-5 - 100 100 100 112 5 15 600 3.75 WUP-10 - 25 25 25 35 10 30 150 0.83 WUP-10 - 32 32 32 42 10 30 190 1.01 WUP-10 - 38 38 38 48 10 30 230 1.16 WUP-10 - 45 45 45 55 10 30 270 1.35 WUP-10 - 50 50 50 60 10 30 300 1.50 WUP-10 - 60 60 60 71 10 30 360 1.94 WUP-10 - 75 75 75 86.5 10 30 450 2.75 WUP-10 - 100 100 100 114 10 30 600 3.98 WUP-10 - 125 125 125 140 10 30 750 5.66 WUP-10 - 150 150 150 170 10 30 900 9.50

14 48

1.2.4. CREVA ZA VRUU VODU I PARU / HOT WATER AND STEAM HOSES

1.2.4.1. CREVO ZA VRUU VODU I PARU 10 BAR; 120 0C / HOT WATER AND STEAM HOSES 10 BAR; 120 0C

P-120 Radni pritisak 10 bar Working pressure 10 bar


Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo / Synthetic textile fabric

Spoljanja guma / Cover: Sintetika crna guma otporna na habanje i starenje / Synthetic rubber resistant to abrasion and weathering


Primena / Applications: Za protok vrue vode, pare i manje agresivnih tenosti / for delivery of hot water, steam, and less aggressive liquids

NP (nazivni



O.D.

Max. radni pritisak /Max.

working pressure


Min. radijus savijanja / Min.

bend radius Teina / WeightOznaka / Part

Number

mm bar mm kg/m P-120 - 10 10 10 20.5 10 40 100 0.33P-120 - 12 12 12 22.5 10 40 120 0.38P-120 - 15 15 15 25.5 10 40 150 0.44P-120 - 20 20 20 30.5 10 40 200 0.56P-120 - 25 25 25 35 10 40 250 0.61P-120 - 32 32 32 45 10 40 320 1.02P-120 - 40 40 40 54 10 40 400 1.34P-120 - 50 50 50 68 10 40 500 2.12P-120 - 60 60 60 82 10 40 600 3.10P-120 - 80 80 80 105 10 40 800 4.55P-120 - 100 100 100 125 10 40 1000 5.55P-120 - 120 120 120 136 10 40 1200 4.11

1.2.4.2. CREVA ZA PARU 6 BAR; 164 0C / STEAM HOSES 6 BAR; 164 0C

P-164 Radni pritisak 6 bar Working pressure 6 bar Unutranji sloj / Tube: Crna sintetika guma otporna

na temperaturu i zasienu paru / Black synthetic rubber heat and saturated steam resistant

Ojaanje / Reinforcement: Visokootporno sintetiko tekstilno pletivo / High resistant synthetic textile fabric

Spoljanja guma / Cover: Sintetika crna guma otporna na temperature, ozon, starenje i habanje / Synthetic rubber resistant to abrasion, heat, ozone and weathering


Primena / Applications: Za protok vrue vode, pare i manje agresivnih tenosti / for delivery of hot water, steam, and less aggressive liquids

NP (nazivni


/ I.D. Spoljni prenik / O.D.


working pressure




Number

mm bar mm kg/m P-164 - 19 19 19 31 6 60 190 0.58P-164 - 25 25 25 38 6 60 250 0.80P-164 - 30 30 30 45 6 60 300 1.08P-164 - 32 32 32 46 6 60 320 1.05P-164 - 35 35 35 50 6 60 350 1.22P-164 - 40 40 40 56 6 60 400 1.49P-164 - 45 45 45 64 6 60 450 2.00P-164 - 50 50 50 67 6 60 500 1.93P-164 - 60 60 60 82 6 60 600 2.99

15 48

1.2.4.3. CREVA ZA PARU 18 BAR; 210 0C / STEAM HOSES 18 BAR; 210 0C

Radni pritisak 18 bar Working pressure 18 bar

P-210

Unutranji sloj / Tube: Sintetika glatka guma otporna na pregrevanje i zasienu vodenu paru / Black synthetic rubber heat and saturated steam resistant

Ojaanje / Reinforcement: Dva sloja elinog pletiva / two braids of high-tensile steel wire

Spoljanja guma / Cover: Sintetika crna guma otporna na temperature, ozon, starenje i habanje / Synthetic rubber resistant to abrasion, heat, ozone and weathering

Temperatura primene / Temperature range: -400C do/to +2100C kratkotrajno do +2100C / with peaks up to +2200C

Primena / Applications: Za protok zasiene i pregrejane pare za pranje i sterilizaciju / for high pressure saturated and superheated steam in cleaning and sterilization





working pressure



radius


Number

mm bar mm kg/m P-210 - 13 13 13 25 18 180 200 0.60 P-210 - 16 16 16 28 18 180 225 0.70 P-210 - 19 19 19 32 18 180 250 0.83 P-210 - 25 25 25 38 18 180 300 1.00 P-210 - 32 32 32 48 18 180 350 1.25

16 48

1.2.5. CREVA ZA VAZDUH / AIR HOSES

1.2.5.1. CREVO ZA VAZDUH 10 BAR / AIR HOSES 10 BAR


L-10

Unutranji sloj / Tube: Crna sintetika glatka guma / Black synthetic rubber


Spoljanja guma / Cover: Sintetika guma otporna na habanje i starenje / Synthetic rubber resistant to abrasion and weathering


Primena / Applications: Za protok komprimovanog vazduha / for compressed air





working pressure




Number

mm bar mm kg/m L-10 - 3.5 3.5 3.5 8.5 10 30 28 0.07 L-10 - 4.5 4.5 4.5 10 10 30 35 0.09 L-10 - 5 5 5 10.5 10 30 40 0.10 L-10 - 8 8 8 15 10 30 65 0.19 L-10 - 10 10 10 17 10 30 80 0.22 L-10 - 13 13 13 19 10 30 105 0.23 L-10 - 16 16 16 23 10 30 130 0.32 L-10 - 19 19 19 26 10 30 150 0.37 L-10 - 25 25 25 33 10 30 200 0.54


L-15








Unutr. prenik / I.D. Spoljni prenik /

O.D.

Max. radni pritisak / Max. working

pressure




Number

mm bar mm kg/m L-15 - 5 5 5 10.5 15 45 40 0.10L-15 - 6 6 6 12 15 45 50 0.13L-15 - 7 7 7 13 15 45 60 0.19L-15 - 8 8 8 15 15 45 65 0.19L-15 - 9 9 9 17 15 45 80 0.22

L-15 - 10 10 10 21 15 45 105 0.32 L-15 - 13 13 13 26 15 45 130 0.49 L-15 - 19 19 19 27 15 45 150 0.43 L-15 - 25 25 25 35 15 45 200 0.71

17 48



L-20










working pressure



radius


Number

mm bar mm kg/m L-20 - 6 6 6 14 20 60 50 0.19 L-20 - 7 7 7 16 20 60 60 0.24 L-20 - 8 8 8 17 20 60 65 0.31 L-20 - 10 10 10 19 20 60 80 0.31 L-20 - 13 13 13 23 20 60 105 0.43 L-20 - 16 16 16 26 20 60 130 0.50 L-20 - 19 19 19 30 20 60 150 0.64 L-20 - 25 25 25 37 20 60 200 0.88


L-25











working pressure



radius


Number

mm bar mm kg/m L-25 - 8 8 8 17 25 75 65 0.27

L-25 - 10 10 10 19 25 75 80 0.31 L-25 - 13 13 13 24 25 75 105 0.48 L-25 - 15 15 15 27 25 75 120 0.60 L-25 - 19 19 19 32 25 75 150 0.70 L-25 - 25 25 25 39 25 75 200 1.07

18 48

1.2.6. CREVA ZA KISELINE I AGRESIVNE MATERIJE / ACID AND CHEMICAL HOSES

1.2.6.1. CREVA ZA KISELINE 10 BAR - POTISNA / ACID AND CHEMICAL HOSES 10 BAR - FOR DELIVERY


HP-10



Spoljanja guma / Cover: Sintetika guma,elektroprovodljiva, otporna na habanje i starenje / Synthetic rubber, antistatic, resistant to abrasion and weathering (R

19 48

1.2.6.3. CREVA ZA KISELINE 16 BAR - USISNO POTISNA / ACID AND CHEMICAL HOSES 16 BAR FOR SUCTION AND DELIVERY


HUP-16

Unutranji sloj / Tube: Crna sintetika antistatika glatka guma / Black synthetic antistatic rubber

Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo i spirala od eline ice / Synthetic textile fabric

Spoljanja guma / Cover: Sintetika guma,elektroprovodljiva, otporna na habanje i starenje / Synthetic rubber, antistatic, resistant to abrasion and weathering (R

20 48

1.2.7. CREVA ZA PREHRAMBENE ARTILKE / BEVERGE AND FOOD HOSES

1.2.7.1. CREVA ZA PREHRAMBENE ARTILKE 10 BAR - POTISNA / BEVERGE AND FOOD HOSES 10 BAR - DELIVERY


PP-10

Unutranji sloj / Tube: Svetla netoksina sintetika glatka guma otporna na prehrambene materije/ Beige color, non toxic synthetic rubber


Spoljanja guma / Cover: Sintetika guma, otporna na ulja, masti, habanje i starenje / Blue abrasion, ageing and weather resistant rubber


Primena / Applications: Za protok svih vrsta prehrambenih materija / for delivery off all foodstuff

NP (nazivni



O.D.


working pressure




Number

mm bar mm kg/m PP-10 - 8 8 8 17 10 30 65 0.26 PP-10 - 10 10 10 19 10 30 80 0.31 PP-10 - 13 13 13 23 10 30 105 0.42 PP-10 - 16 16 16 26 10 30 130 0.49 PP-10 - 19 19 19 31 10 30 190 0.71 PP-10 - 25 25 25 39 10 30 250 1.05 PP-10 - 35 35 35 51 10 30 350 1.54 PP-10 - 50 50 50 70 10 30 500 2.69 PP-10 - 60 60 60 80 10 30 600 3.10 PP-10 - 75 75 75 99 10 30 750 4.69 PP-10 - 100 100 100 125 10 30 1000 6.34 1.2.7.2. CREVA ZA PREHRAMBENE ARTILKE 16 BAR - POTISNA / BEVERGE AND FOOD HOSES 16 BAR - DELIVERY

PP-16




Spoljanja guma / Cover: Sintetika guma,, otporna na ulja, masti, habanje i starenje / Blue abrasion, ageing and weather resistant rubber



NP (nazivni




working pressure




Number

mm bar mm kg/m PP-16 - 19 19 19 31 16 64 190 0.6 PP-16 - 25 25 25 37 16 64 225 0.8 PP-16 - 32 32 32 44 16 64 260 1.0 PP-16 - 38 38 38 51 16 64 335 1.3 PP-16 - 50 50 50 66 16 64 410 2.0 PP-16 - 60 60 63.5 79 16 64 450 2.4 PP-16 - 75 75 75 91 16 64 525 2.8 PP-16 - 100 100 100 116 16 64 675 3.8

21 48

1.2.7.3. CREVA ZA PREHRAMBENE ARTILKE 6 BAR - SUISNO-POTISNA / BEVERGE AND FOOD HOSES 6 BAR - SUCTION AND DELIVERY


PUP-6

Unutranji sloj / Tube: Bela prirodna glatka guma otporna na prehrambene materije sa PH-vrednost >5 / White smooth rubber, suitable for foods having ph>5

Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo i spirala od eline ice / Synthetic textile fabric embedded steel wire helix








working pressure



radius


Number

mm bar mm kg/m PUP-6 - 40 40 40 50 6 18 100 1.36 PUP-6 - 45 45 45 56 6 18 115 1.74 PUP-6 - 50 50 50 61 6 18 125 1.90 PUP-6 - 60 60 63.5 76 6 18 190 2.45 PUP-6 - 75 75 75 87.5 6 18 250 3.07 PUP-6 - 100 100 100 114 6 18 350 4.22 1.2.7.4. CREVA ZA PREHRAMBENE ARTILKE 10 BAR - SUISNO-POTISNA / BEVERGE AND FOOD HOSES 10 BAR -

SUCTION AND DELIVERY

PUP-10



Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo i spirala od eline ice/ Synthetic textile fabric embedded steel wire helix








working pressure



radius


Number

mm bar mm kg/m PUP-10 - 19 19 19 31 10 30 115 0.74 PUP-10 - 25 25 25 36 10 30 150 0.92 PUP-10 - 32 32 32 44 10 30 190 1.16 PUP-10 - 38 38 38 50 10 30 230 1.35 PUP-10 - 50 50 50 63 10 30 300 1.88 PUP-10 - 60 60 63.5 77 10 30 380 2.34 PUP-10 - 75 75 75 89 10 30 450 3.10 PUP-10 - 100 100 100 116 10 30 600 4.61

22 48

1.2.7.5. CREVA ZA KISELINE 16 BAR - USISNO POTISNA / ACID AND CHEMICAL HOSES 16 BAR FOR SUCTION AND DELIVERY


PUP-16

Unutranji sloj / Tube: Glatki ultra visoko molekularni beli polietilen (UHMWPE), provodan, otporan na prehrambene materije / Smooth, white ultra high molecular polyethylen (UHMWPE), suitable for foodstuff contact

Ojaanje / Reinforcement: Sintetiko, tekstilno pletivo i spirala od eline ice i bakarna ica za elektrokontakt izmeu prikljuka i creva / Synthetic textile fabric embedded steel wire helix and built-in copper wires



Primena / Applications: Za protok svih vrsta prehrambenih materija, biljnih i ivotinjskih masti i ulja kao i pia, mleka, mineralne vode, vonih sokova, vina likera itd. / for allfoodstuff containing animal or vegetable fats and oils as well as beverages such milk, mineral water, fruit juices, wine and liquers etc.





working pressure



radius


mm bar mm kg/m PUP-16 - 19 19 19 31 16 64 190 0.7 PUP-16 - 25 25 25 37 16 64 225 0.9 PUP-16 - 32 32 32 44 16 64 260 1.2 PUP-16 - 38 38 38 51 16 64 335 1.5 PUP-16 - 50 50 50 66 16 64 410 2.2 PUP-16 - 60 60 63.5 79 16 64 450 2.8 PUP-16 - 75 75 75 91 16 64 525 3.7 PUP-16 - 100 100 100 116 16 64 675 4.7

23 48

1.2.8. CREVA ZA ABRAZIVNE MATERIJALE / MATERIAL HANDLING HOSES

1.2.8.1. CREVA ZA ABRAZIVNE MATERIJALE 10 BAR - POTISNA / MATERIAL HANDLING HOSES 10 BAR - DELIVERY


AP-10

Unutranji sloj / Tube: Crna sintetika glatka guma otporna na habanje, antistatika / Smooth black antistatic abrasion resistant rubber


Spoljanja guma / Cover: Crna sintetika guma, otporna na habanje i starenje, antistatika / Black smooth antistatic, weather and abrasion resistant synthetic rubber R

24 48

1.2.8.3. CREVA ZA ABRAZIVNE MATERIJALE 5 BAR - USISNO-POTISNA / MATERIAL HANDLING HOSES 10 BAR - SUCTION AND DELIVERY


AUP-10

Unutranji sloj / Tube: Crna sintetika glatka guma otporna na habanje, antistatika / Smooth black antistatic abrasion resistant rubber


Spoljanja guma / Cover: Crna sintetika guma, otporna na habanje i starenje / Black smooth, weather and abrasion resistant synthetic rubber


Primena / Applications: Za protok abrazivnih materija kao to su mokri ili suvi pesak, ili eline kuglice / for conveyting of wet and dry sand and grit blasting materials





working pressure



radius


Number

mm bar mm kg/m AUP-10 - 50 50 50 64 10 30 300 1.92 AUP-10 - 60 60 60 74 10 30 360 2.26 AUP-10 - 70 70 70 84 10 30 420 2.70 AUP-10 - 80 80 80 95 10 30 480 3.31 AUP-10 - 100 100 100 118 10 30 600 4.80 AUP-10 - 120 120 120 138 10 30 720 5.68

25 48

2. PLASTINA CREVA / PLASTIC HOSES

2.1. TEFLONSKA CREVA / POLYTETRAFLUORETHYLENE HOSES - PTFE 2.1.1. TEFLONSKA CREVA SA JEDNIM OPLETOM / POLYTETRAFLUORETHYLENE HOSES (PTFE) - ONE BRAIDED

T-1 Spoljni oplet / braided: jedan sloj icom od nerajueg elika / one braid layer of stainless steel wire

Unutranji sloj / Tube: POLYTETRAFLUORETHYLENE Spoljni oplet

Temperatura primene / Temperature range: -500C do/to +1500C kod permanentne temperature / permanent temperature, a do / and to +2300C za radni pritisak ispod 20 bar / for working pressure up to 20 bar

Primena / Applications: Za protok hidraulinih tenosti pri visokim temperaturama, odnosno za agresivne medijume u hemijskoj industriji, povrinskoj zatiti / for use at high temperature as well as aggressive chemical fluids

NP (nazivni



O.D.


working pressure




Number

mm mm inch mm bar mm kg/m T1 - 5 5 4.7 3/16 7.8 275 1100 50 0.09 T1 - 6 6 6.3 1/4 9.5 240 960 75 0.13 T1 - 8 8 8.2 5/16 11.5 200 800 100 0.17 T1 - 10 10 9.7 3/8 13.3 175 700 120 0.19 T1 - 12 12 12.8 1/2 16.7 150 600 135 0.29 T1 - 16 16 16.0 5/8 20.0 125 500 160 0.34 T1 - 20 20 19.4 3/4 23.5 100 400 200 0.41 T1 - 25 25 25.0 1 29.0 80 320 250 0.51

2.1.2. TEFLONSKA CREVA SA DVA OPLETA / POLYTETRAFLUORETHYLENE HOSES (PTFE) - TWO BRAIDED

T-2 Spoljni oplet / braided: dva sloja icom od nerajueg elika / two braided layers of stainless steel wire

Unutranji sloj / Tube: POLYTETRAFLUORETHYLENE

Temperatura primene / Temperature range: -500C do/to +1500C kod permanentne temperature / permanent temperature, a do / and to +2300C za radni pritisak ispod 20 bar / for working pressure up to 20 bar

Primena / Applications: Za protok hidraulinih tenosti pri visokim temperaturama, odnosno za agresivne medijume u hemijskoj industriji, povrinskoj zatiti / for use at high temperature as well as aggressive chemical fluids

NP (nazivni




working pressure




Number

mm mm inch mm bar mm kg/m T2 - 6 6 6.3 1/4 11.0 275 1100 75 0.23 T2 - 8 8 8.2 5/16 13.2 250 1000 100 0.26 T2 - 10 10 9.7 3/8 15.0 225 900 120 0.34 T2 - 12 12 12.8 1/2 18.6 200 800 135 0.47 T2 - 16 16 16.0 5/8 21.5 175 700 160 0.53 T2 - 20 20 19.4 3/4 25.5 150 600 200 0.69 T2 - 25 25 25.0 1 31.0 110 440 250 0.81

26 48

2.2. POLIFLEX CREVA / POLIFLEX HOSES

2.2.1. POLIFLEX CREVA PFX-2 / POLIFLEX HOSES PFX-2

(SPIR STAR) PFX-2

Unutranji sloj / Tube: Polyoxymethilene Ojaanje / Reinforcement: Dva opleta eline ice

visoke zatezne jaine / two braids of high tensile steel wire

Spoljanja guma / Cover: Poliamid


Primena / Applications: Kod najviih pritisaka za ienje cevi, npr. izmenjivaa toplote u hemijskoj industriji sirove nafte / High pressure service for tube cleaning such as heat exchangers in the chemical and refining industries





working pressure



radius


Number

mm mm inch mm bar mm kg/m PFX-2 - 3 3 3.0 1/8 7.0 1100 2750 60 0.07 PFX-2 - 4 4 4.0 5/32 7.7 1100 2800 75 0.10 PFX-2 - 5 5 4.7 3/16 9.5 1000 2500 95 0.20 PFX-2 - 6 6 6.3 1/4 11.5 1000 2500 110 0.28 PFX-2 - 8 8 8.0 5/16 13.3 900 2250 120 0.22


PFX-4

(SPIR STAR)

Unutranji sloj / Tube: kod NP 4-8 / for DN 4-8: Polyoxymethilene kod NP 12-25 / for DN 12-25: Poliamid Ojaanje / Reinforcement: etiri opleta eline ice

visoke zatezne jaine / four braids of high tensile steel wire

Spoljanja guma / Cover: Poliamid


Primena / Applications: Kod najviih pritisaka u graevinarstvu i brodogradnji, odnosno ostaloj industriji za ienje od neistoa povrine materijala, rezervoara, betona, asfalta itd. / High pressure service for tube cleaning such as heat exchangers in the chemical and refining industries





working pressure



radius


Number

mm mm inch mm bar mm kg/m PFX-4 - 6 6 6.3 1/4 12.5 1640 4100 155 0.33 PFX-4 - 8 8 8.0 5/16 15.1 1500 3750 175 0.44 PFX-4 - 10 10 9.7 3/8 19.4 1400 3500 190 0.70 PFX-4 - 12 12 12.8 1/2 22.5 1300 3250 200 0.94 PFX-4 - 20 20 19.6 3/4 30.0 1000 2500 250 1.39 PFX-4 - 25 25 25.0 1 37.0 900 2250 300 1.90

27 48

2.3. POLIAMIDNA CREVA / POLYAMIDE HOSES Polyamid PA 12 PA

Temperatura primene / Temperature range: -400C do/to +1000C Primena / Applications: Protok hidraulinih tenosti pri visokim temperaturama, odnosno za agresivne medijume u

hemijskoj industriji i povrinskoj zatiti / for zse at high temperatures as well as aggressive chemical fluids





working pressure



Number

mm bar mm kg/m PA - 4x1 4 4.0 2.0 45 20 9.6 PA - 6x1 6 6.0 4.0 27 30 16.0 PA - 8x1 8 8.0 6.0 19 40 22.4 PA - 10x1 10 10.0 8.0 12 60 28.8 PA - 12x1.5 12 12.0 9.0 12 90 50.5 PA - 12x1 12 15.0 10.0 12 90 40.0 PA - 15x1.5 15 15.0 12.0 15 100 64.9 PA - 16x2 18 16.0 12.0 24 120 89.7

28 48

2.4. PVC CREVA / PVC HOSES

2.4.1. PVC ARMIRANA CREVA / PVC - TRANSPARENT HOSES WITH TEXTILE REINFORCEMENT

PVC PVC - providan ,armiran tekstilnim vlaknima PVC - transparent with textile reinforcement between the wals

Temperatura primene / Temperature range: -200C do/to +600C Primena / Applications: Za protok hidraulinih tenosti pri visokim temperaturama, odnosno za agresivne medijume

u hemijskoj industriji i povrinskoj zatiti / for delivery of foodstuff, for general industrial purpose and for agriculture applications





working pressure

Min. pritisak rasprskavanja / Min. burst

pressure

Min. radijus savijanja

/ Min. bend radius

Teina / WeightOznaka / Part Number

mm bar mm kg/m PVC - 5 5 5.0 11.0 20 60 30 0.092 PVC - 6 6 6.0 12.0 20 60 40 0.103 PVC - 8 8 8.0 14.0 20 60 50 0.126 PVC - 10 10 10.0 16.0 20 60 60 0.149 PVC - 12 12 12.0 17.0 12 36 75 0.170 PVC - 13 13 13.0 19.0 12 36 80 0.184 PVC - 15 15 15.0 21.0 12 36 90 0.207 PVC - 16 16 16.0 22.0 10 30 100 0.218 PVC - 19 19 19.0 26.0 10 30 110 0.302 PVC - 25 25 25.0 33.0 8 24 150 0.444 PVC - 30 30 30.0 38.0 7 21 180 0.521 PVC - 32 32 32.0 42.0 7 21 190 0.709 PVC - 38 38 38.0 48.0 6 18 230 0.824 PVC - 40 40 40.0 50.0 6 18 240 0.862 PVC - 50 50 50.0 64.0 5 15 300 1.528


P-PVC

PVC - armiran tekstilnim pletivom PVC - with synthetic textile yarns

Temperatura primene / Temperature range: -150C do/to +600C Primena / Applications: Protok vode pomeane sa neagresivnim materijama / for delivery of water and non-

aggressive liquids

NP (nazivni prenik)

/ DN Unutr. prenik / I.D.Max. radni pritisak

/ Max. working pressure

Min. pritisak rasprskavanja

/ Min. burst pressure Teina / Weight Oznaka / Part

Number mm bar kg/m

P-PVC - 20 20 20 8 24 0.13 P-PVC - 25 25 25 8 24 0.17 P-PVC - 32 32 32 8 24 0.21 P-PVC - 38 38 38 8 24 0.25 P-PVC - 50 50 50 8 24 0.37 P-PVC - 75 75 75 8 24 0.55 P-PVC - 100 100 100 8 24 0.83 P-PVC - 150 150 150 3 9 1.25 P-PVC - 200 200 200 3 9 1.93

29 48

2.4.3. PVC USISNO-POTISNA CREVA / PVC - SUCTION AND DELIVERY HOSES

UP-PVC PVC - armiran tvrdom spiralom od PVC-a PVC with rigid PVC spiral embedded

Temperatura primene / Temperature range: -250C do/to +600C Primena / Applications: Usisno - potisno crevo za protok vode pomeane sa neagresivnim materijama / for delivery

of water and non-agresive liquids



Max. radni pritisak / Max. working pressure


pressure


/ Min. bend radius


Number

mm bar mm kg/m UP-PVC - 25 25 25 8 24 165 0.55 UP-PVC - 32 32 32 8 24 205 0.64 UP-PVC - 38 38 38 7 21 245 0.70 UP-PVC - 50 50 50 6 18 297 1.05 UP-PVC - 75 75 75 4.5 13.5 438 1.75 UP-PVC - 100 100 100 4 12 580 2.70 UP-PVC - 150 150 150 2.5 7.5 838 4.50 UP-PVC - 200 200 200 1.5 4.5 1105 8.75

2.4.4. PVC USISNO-PTISNA CREVA ZA IVOTNE NAMIRNICE/ PVC-SUCTION AND DELIVERY HOSES FOR BEVERAGE AND FOOD

UP-P-PVC PVC - armiran tvrdom spiralom od PVC-a PVC with rigid PVC spiral embedded

Temperatura primene / Temperature range: -100C do/to +600C Primena / Applications: Usisno - potisno crevo za protok ivotnih namirnica (mleko, alkoholna i bezalkoholna pia

itd.) / for suction and delivery of drinking water, soft drinks, wine, vinegar, milk and liquid foodstuffs



Max. radni pritisak / Max. working pressure


pressure


/ Min. bend radius


Number

mm bar mm kg/m UP-P-PVC - 25 25 25 8 24 165 0.55 UP-P-PVC - 32 32 32 8 24 205 0.64 UP-P-PVC - 38 38 38 7 21 245 0.70 UP-P-PVC - 50 50 50 6 18 297 1.05 UP-P-PVC - 75 75 75 4.5 13.5 438 1.75 UP-P-PVC - 100 100 100 4 12 580 2.70 UP-P-PVC - 150 150 150 2.5 7.5 838 4.50 UP-P-PVC - 200 200 200 1.5 4.5 1105 8.75

30 48

2.4.5. PVC CREVA ZA VENTILACIJU/ PVC - HOSES FOR VENTILATION

Mekani PVC - armiran elinom spiralom; otporno na atmosferske uticaje i hemikalije Soft PVC, with embedded steel wire helix

V-PVC

Temperatura primene / Temperature range: -200C do/to +600C Primena / Applications: za odsisavanje vazduha, praine, pare u drvnoj, tekstilnoj i industriji porcelana, kao i za

procese zavarivanja, te na poljoprivrednim mainama / for suction of air, dust, fumes etc.

NP (nazivni prenik) / DN Unutr. prenik / I.D.


pressure


radius Teina / Weight Oznaka / Part

Number mm bar mm kg/m

V-PVC - 50 50 50 1.5 28 0.54 V-PVC - 60 60 60 1.0 33 0.63 V-PVC - 70 70 70 1.0 38 0.68 V-PVC - 75 75 75 1.0 41 0.72 V-PVC - 80 80 80 1.0 43 0.75 V-PVC - 90 90 90 1.0 48 0.98 V-PVC - 100 100 100 1.0 54 1.15 V-PVC - 110 110 110 0.5 59 1.25 V-PVC - 120 120 120 0.5 64 1.35 V-PVC - 125 125 125 0.5 66 1.40 V-PVC - 130 130 130 0.5 69 1.45 V-PVC - 140 140 140 0.5 74 1.55 V-PVC - 150 150 150 0.5 79 1.70 V-PVC - 160 160 160 0.5 84 1.80 V-PVC - 180 180 180 0.5 94 2.00 V-PVC - 200 200 200 0.5 104 2.20 V-PVC - 250 250 250 0.5 130 3.30 V-PVC - 300 300 300 0.5 135 4.20

31 48

3. METALNA (HARMONIKA) CREVA / STAINLESS STEEL HOSES

CC

CC fleksibilna metalna creva (harmonika), izraena od nerajueg elika (prohrom), sa jednim ili dva opleta icom od nerajueg elika CC corrugated parallel flexible metal hoses made from stainless steel with one or two stainless steel braids

Temperatura primene / Temperature range: -2000C do/to +5500C Primena / Applications: protok medijuma u industriji gvoa i elika, stakla, papira, nuklearnoj, pneumatskoj,

naftnoj i hemijskoj industriji (agresivni fuidi, para, gas, gorivo...) / for medium pressure application in iron and steel industries, cryogenic, glass manufacture, paper, nuclear, pneumatic industries, petrochemical and chemical, (aggressive fluids, steam, gas, fuel...)


/ Min. bend radius NP (nazivni prenik) /

DN Unutr. prenik

/ I.D. Spoljni prenik

/ O.D.


working pressure

Teina / Weight dinamiki /

dinamical statiki / statical Oznaka / Part

Number

mm bar kg/m mm CC1 - 6 6 6 12 150 0.18 25 100 CC2 - 6 6 6 12 220 0.28 30 100 CC1 - 8 8 8 13 135 0.24 40 140 CC2 - 8 8 8 15 200 0.36 45 140 CC1 - 12 12 12 20 70 0.29 35 210 CC2 - 12 12 12 21 100 0.47 35 225 CC1 - 16 16 16 25 65 0.37 45 285 CC2 - 16 16 16 27 90 0.58 45 305 CC1 - 20 20 20 30 50 0.50 55 310 CC2 - 20 20 20 32 75 0.76 55 330 CC1 - 25 25 25 36 40 0.64 70 375 CC2 - 25 25 25 38 60 0.96 70 385 CC1 - 32 32 32 46 35 1.00 80 405 CC2 - 32 32 32 48 50 1.52 80 415 CC1 - 40 40 40 54 30 1.20 100 480 CC2 - 40 40 40 56 40 1.77 100 490 CC1 - 50 50 50 68 25 1.54 130 550 CC2 - 50 50 50 70 32 2.30 130 570 CC1 - 65 65 65 88 20 2.55 175 675 CC2 - 65 65 65 90 25 3.80 175 685 CC1 - 75 75 75 100 18 2.90 200 750 CC2 - 75 75 75 103 22 4.35 200 770 CC1 - 100 100 100 128 14 4.20 250 920 CC2 - 100 100 100 130 25 6.30 250 960 CC1 - 125 125 125 155 12.5 5.80 325 1160 CC2 - 125 125 125 158 18 8.40 325 1200 CC1 - 150 150 150 180 10 6.80 375 1320 CC2 - 150 150 150 183 15 9.60 375 1400 CC1 - 200 200 200 232 6 11.00 260 1400 CC2 - 200 200 200 237 9 15.00 260 1600 CC1 - 250 250 250 287 3.5 13.50 340 1650 CC2 - 250 250 250 292 5 17.80 340 1750 CC1 - 300 300 300 340 2 17.60 420 2000 CC2 - 300 300 300 345 3 22.60 420 2300

32 48

PRIKLJUCI ZA CREVA / HOSE FITTINGS Loptasti prikljuak za zaptivni konus / Ball fitting for cone 60

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d OK

AM - 12 4 M12x1.5 3 17 AM - 14 6 M14x1.5 4 17 AM - 16 8 M16x1.5 5.5 19 AM - 18 10 M18x1.5 7 22 AM - 22 13 M22x1.5 9.5 27 AM - 26 16 M26x1.5 12.5 32 AM - 30 19 M30x1.5 15 36 AM - 38 25 M38x1.5 20 46 AM - 45 32 M45x1.5 26 55 AM - 42 40 M52x1.5 32 65 AM - 65 50 M65x1.5 43 75

Loptasti prikljuak za zaptivni konus /Ball fitting for cone 24

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d OK

AM1 - 12 4 M12x1.5 3 17 AM1 - 14 6 M14x1.5 4 17 AM1 - 16 8 M16x1.5 5.5 19 AM1 - 18 10 M18x1.5 7 22 AM1 - 22 13 M22x1.5 9.5 27 AM1 - 26 16 M26x1.5 12.5 32 AM1 - 30 20 M30x1.5 15 36 AM1 - 36 25 M36x1.5 20 46 AM1 - 45 32 M45x1.5 26 55 AM1 - 52 40 M52x1.5 32 65 AM1 - 65 50 M65x1.5 43 75

Loptasti prikljuak za zaptivni konus / Ball fitting for cone 24

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d OK

AM2 - 16 4 M16x1.5 3 19 AM2 - 18 6 M18x1.5 4 22 AM2 - 20 8 M20x1.5 5.5 24 AM2 - 22 10 M22x1.5 7 27 AM2 - 24 13 M24x1.5 9.5 30 AM2 - 30 16 M30x2 12.5 36 AM2 - 36 19 M36x2 15 46 AM2 - 42 25 M42x2 20 50 AM2 - 52 32 M52x2 26 65 AM2 - 65 38 M65x2 32 75 AM2 - 70 50 M70x1.5 43 85

Loptasti prikljuak za zaptivni konus /Ball fitting for cone 60

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d OK

AR - 1/4 4 R1/4"x19 3 17 AR - 1/4 6 R1/4"x19 4 17 AR - 3/8 8 R3/8"x19 5.5 19 AR - 1/2 10 R1/2"x14 7 22 AR - 5/8 13 R5/8"x14 9.5 27 AR - 3/4 16 R3/4"x14 12.5 32 AR - 1 19 R1"x11 15 36

AR - 11/4 25 R11/4"x11 20 46 AR - 11/2 32 R11/2"x11 26 55 AR - 13/4 38 R13/4"x11 32 65 AR - 2 50 R2"x11 43 75

Okasti prikljuak / Eye fitting

OZNAKA Part

Number

Nazivniprenik

DN Lopta d h

B - 10 4 17 10 10 B - 12 6 20 12 12 B - 14 8 24 14 14 B - 16 10 28 16 16 B - 18 13 32 18 20 B - 22 16 39 22 25 B - 26 19 46 26 30 B - 30 25 54 30 36 B - 38 32 67 38 44 B - 42 44 80 42 46 B - 45 50 95 45 50

Ravni prikljuak / Flat fitting

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d OK

CM - 12 4 M12x1.5 3 17 CM - 14 6 M14x1.5 4 17 CM - 16 8 M16x1.5 5.5 19 CM - 18 10 M18x1.5 7 22 CM - 22 13 M22x1.5 10 27 CM - 26 16 M26x1.5 13 32 CM - 30 19 M30x1.5 16 36 CM - 38 25 M38x1.5 21.5 46 CM - 45 32 M45x1.5 28 55 CM - 52 40 M52x1.5 34 65 CM - 65 50 M65x2 46 75

33 48

Ravni prikljuak / Flat fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d OK

CR - 1/4 4 R1/4"x19 3 17 CR - 1/4 6 R1/4"x19 4 17 CR - 3/8 8 R3/8"x19 5.5 19 CR - 1/2 10 R1/2"x14 7 22 CR - 5/8 13 R5/8"x14 10 27 CR - 3/4 16 R3/4"x14 13 32 CR - 1 19 R1"x11 16 36

CR - 11/4 25 R11/4"x11 21.5 46 CR - 11/2 32 R11/2"x11 28 55 CR - 13/4 40 R13/4"x11 34 65 CR - 2 50 R2"x11 46 75

Konusni prikljuak /Conical fitting

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d OK

DM - 12 4 M12x1.5 3 17 DM - 14 6 M14x1.5 4 17 DM - 16 8 M16x1.5 5.5 19 DM - 18 10 M18x1.5 7 22 DM - 22 13 M22x1.5 10 27 DM - 27 16 M27x2 13 32 DM - 33 19 M33x2 16 36 DM - 39 25 M39x2 21.5 46 DM - 48 32 M48x2 28 55 DM - 52 40 M52x2 34 65 DM - 65 50 M65x2 46 75

Konusni prikljuak / Conical fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d OK

DR - 1/4 4 R1/4"x19 3 17 DR - 1/4 6 R1/4"x19 4 17 DR - 3/8 8 R3/8"x19 5.5 19 DR - 1/2 10 R1/2"x14 7 22 DR - 5/8 13 R5/8"x14 10 27 DR - 3/4 16 R3/4"x14 13 32 DR - 1 19 R1"x11 16 36 DR - 11/4 25 R11/4"x11 21.5 46 DR - 11/2 32 R11/2"x11 28 55 DR - 13/4 40 R13/4"x11 34 65 DR - 2 50 R2"x11 46 75

Konusni prikljuak / Conical fitting

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d OK

DUNF - 7/16 4 7/16"x20UNF 3 17DUNF - 1/2 6 1/2"x20UNF 4 17DUNF - 9/16 8 9/16"x18UNF 5.5 19DUNF - 3/4 10 3/4"x16UNF 7 22DUNF - 7/8 13 7/8"x14UNF 10 27DUNF - 11/16 16 11/16"x12UNF 13 32DUNF - 15/16 19 15/16"x12UNF 16 36DUNF - 15/8 25 15/8"x12UNF 21.5 46DUNF - 17/8 32 17/8"x12UNF 28 55DUNF - 2 40 2"x12UNF 34 65DUNF - 21/2 50 21/2"x12UNF 46 75

Produeni ravni / Extending flat fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d1 OK

EM - 12 4 M12x1.5 3 17 EM - 14 6 M14x1.5 4 19 EM - 16 8 M16x1.5 5.5 22 EM - 18 10 M18x1.5 7 22 EM - 22 13 M22x1.5 10 27 EM - 27 16 M26x1.5 13 32 EM - 33 19 M30x1.5 16 36 EM - 39 25 M38x1.5 21.5 46 EM - 48 32 M45x1.5 28 55 EM - 52 40 M52x1.5 34 65

EM - 65 50 M65x2 46 75

Produeni ravni / Extending flat fitting

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d1 d2 OK

ER - 1/4 4 R1/4"x19 3 10 14ER - 1/4 6 R1/4"x19 4 11 17ER - 3/8 8 R3/8"x19 5.5 14 19ER - 1/2 10 R1/2"x14 7 16 22ER - 5/8 13 R5/8"x14 10 20 27ER - 3/4 16 R3/4"x14 13 24 32ER - 1 19 R1"x11 16 28 36

ER - 11/4 25 R11/4"x11 21.5 36 46ER - 11/2 32 R11/2"x11 28 42 55ER - 13/4 40 R13/4"x11 34 48 65ER - 2 50 R2"x11 46 55 75

34 48

Cevni prikljuak / Pipe fitting F1

OZNAKA Part

Number

Nazivniprenik

DN d1 d2 h OK

F1 - 6 4 3 6 20 12 F1 - 8 6 4 8 22 12 F1 - 10 8 5.5 10 24 14 F1 - 12 10 7 12 27 17 F1 - 15 13 10 15 30 19 F1 - 18 16 13 18 32 22 F1 - 22 19 16 22 34 27 F1 - 28 25 21.5 28 36 32 F1 - 35 32 28 35 40 41 F1 - 40 40 34 40 45 46 F1 - 50 50 46 50 50 55

Cevni prikljuak / Pipe fitting F2

OZNAKA Part

Number

Nazivni prenik

DN d1 d2 h OK

F2 - 8 4 3 8 23 14 F2 - 10 6 4 10 24 17 F2 - 12 8 5.5 12 25 19 F2 - 14 10 7 14 27 22 F2 - 16 13 10 16 30 27 F2 - 20 16 13 20 32 32 F2 - 25 19 16 25 34 36 F2 - 30 25 21.5 30 36 46 F2 - 38 32 28 38 40 55 F2 - 46 40 34 46 45 65 F2 - 54 50 46 54 50 75

Navojni cevni prikljuak / Pipe thread fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d h OK

GM -12 4 M12x1.5 3 10 14GM - 14 6 M14x1.5 4 10 17GM - 16 8 M16x1.5 5.5 10 19GM - 18 10 M18x1.5 7 10 22GM - 22 13 M22x1.5 10 12 27GM - 26 16 M26x1.5 13 12 32GM - 30 19 M30x1.5 16 12 36GM - 38 25 M38x1.5 21 14 46GM - 45 32 M45x1.5 28 14 55GM - 52 40 M52x1.5 34 16 60

GM - 65 50 M65x2 46 16 70

Navojni ravni prikljuak / Flat thread fitting

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d1 d OK

GR - 1/4 4 R1/4"x19 3 12 14GR - 1/4 6 R1/4"x19 4 12 17GR - 3/8 8 R3/8"x19 5.5 12 19GR - 1/2 10 R1/2"x14 7 14 22GR - 5/8 13 R5/8"x14 10 14 27GR - 3/4 16 R3/4"x14 13 16 32GR - 1 19 R1"x11 16 16 36GR - 11/4 25 R11/4"x11 21 16 46GR - 11/2 32 R11/2"x11 28 16 55GR - 13/4 40 R13/4"x11 34 18 65GR - 2 50 R2"x11 46 18 75

Navojni ravni prikljuak / Flat thread fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d h OK

GNPT- 4 1/8"x27NPT 3 12 17GNPT- 6 1/4"x18NPT 4 17 17GNPT- 8 3/8"x18NPT 5.5 17 19GNPT- 10 1/2"x14NPT 7 22 22GNPT- 13 5/8"x14NPT 10 22 27GNPT- 16 3/4"x14NPT 13 24 32GNPT-1 19 1"x11NPT 16 30 36GNPT-11/4 25 11/4"x11NPT 21 30 46GNPT-11/2 32 11/2"x11NPT 28 30 55GNPT-17/8 40 17/8"x11NPT 34 34 65 GNPT-2 50 2"x11NPT 46 36 75

Navojni loptasti prikljuak / Ball thread fitting

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d h OK

HM - 12 4 M12x1.5 3 10 17HM - 14 6 M14x1.5 4 10 17HM - 16 8 M16x1.5 5.5 10 19HM - 18 10 M18x1.5 7 10 22HM - 22 13 M22x1.5 10 12 27HM - 26 16 M26x1.5 13 12 32HM - 30 19 M30x1.5 16 12 36HM - 38 25 M38x1.5 21 14 46HM - 45 32 M45x1.5 28 14 55HM - 52 40 M52x1.5 34 20 65HM - 65 50 M65x2 46 24 75

35 48


OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d1 h OK

HR - 1/4 4 R1/4"x19 3 12 17HR - 1/4 6 R1/4"x19 4 12 17HR - 3/8 8 R3/8"x19 5.5 12 19HR - 1/2 10 R1/2"x14 7 14 22HR - 5/8 13 R5/8"x14 10 14 27HR - 3/4 16 R3/4"x14 13 16 32HR - 1 19 R1"x11 16 16 36HR - 11/4 25 R11/4"x11 21 16 46HR - 11/2 32 R11/2"x11 28 16 55HR - 13/4 40 R13/4"x11 34 18 65

HR - 2 50 R2"x11 46 18 75


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d1 h OK

HM2 - 16 4 M16x1.5 3 12 17HM2 - 18 6 M18x1.5 4 12 19HM2 - 20 8 M20x1.5 5.5 12 22HM2 - 22 10 M22x1.5 7 14 24HM2 - 24 13 M24x1.5 10 14 27HM2 - 30 16 M30x2 13 16 32HM2 - 36 19 M36x2 16 16 41HM2 - 42 25 M42x2 21 16 46HM2 - 52 32 M52x2 28 16 55HM2 - 65 40 M65x2 34 18 70HM2 - 70 50 M70x2 46 18 75

Navojno cevni prikljuak / Pipe thread fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d1 d2 h OK

JM1 - 12 4 M12x1.5 3 6 10 14JM1 - 14 6 M14x1.5 4 8 10 17JM1 - 16 8 M16x1.5 5.5 10 11 17JM1 - 18 10 M18x1.5 7 12 11 19JM1 - 22 13 M22x1.5 10 15 12 24JM1 - 26 16 M26x1.5 13 18 12 27JM1 - 30 19 M30x2 16 22 14 32JM1 - 38 25 M38x2 21 28 14 41JM1 - 45 32 M45x2 28 35 16 50JM1 - 52 40 M52x2 34 40 16 60

JM1 - 65 50 M65x2 50 50 18 70

Navojno cevni prikljuak / Pipe thread fitting

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d1 d2 h OK

JM2 - 16 4 M16x1.5 3 8 12 17JM2 - 18 6 M18x1.5 4 10 12 19JM2 - 20 8 M20x1.5 5.5 12 12 22JM2 - 22 10 M22x1.5 7 14 14 24JM2 - 24 13 M24x1.5 10 16 14 27JM2 - 30 16 M30x2 13 20 16 32JM2 - 36 19 M36x2 16 25 18 41JM2 - 42 25 M42x2 21 30 20 46JM2 - 52 32 M52x2 28 38 22 55JM2 - 65 40 M65x2 34 46 26 70JM2 - 70 50 M70x2 50 54 30 75

Navojni cevni prikljuak / Pipe thread fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d d2 h OK

JR - 1/4 4 R1/4"x19 3 6 12 17JR - 1/4 6 R1/4"x19 4 8 12 19JR - 3/8 8 R3/8"x19 5.5 10 12 22JR - 1/2 10 R1/2"x14 7 12 14 24JR - 5/8 13 R5/8"x14 10 15 14 27JR - 3/4 16 R3/4"x14 13 18 16 32JR - 1 19 R1"x11 16 22 16 41JR - 11/4 25 R11/4"x11 21 28 16 46JR - 11/2 32 R11/2"x11 28 35 16 55JR - 13/4 40 R13/4"x11 34 40 18 65

JR - 2 50 R2"x11 46 50 18 75

Navojni konusni prikljuak / Conical thread fitting

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d1 d OK

HM - 12 4 M12x1.5 3 14 14HM - 14 6 M14x1.5 4 14.5 17HM - 16 8 M16x1.5 5.5 15.5 19HM - 18 10 M18x1.5 7 17 20HM - 22 13 M22x1.5 10 19 24HM - 27 16 M27x2 13 22 32HM - 33 19 M33x2 16 23 36HM - 39 25 M39x2 21 25 41HM - 48 32 M48x2 28 28 50HM - 52 40 M52x2 34 30 55HM - 60 50 M60x2 46 30 65

36 48


OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d h OK

KR - 1/4 4 R1/4"x19 3 14 14KR - 1/4 6 R1/4"x19 4 14.5 17KR - 3/8 8 R3/8"x19 5.5 15.5 19KR - 1/2 10 R1/2"x14 7 17 22KR - 5/8 13 R5/8"x14 10 19 27KR - 3/4 16 R3/4"x14 13 22 32KR - 1 19 R1"x11 16 23 36KR - 11/4 25 R11/4"x11 21 25 46KR - 11/2 32 R11/2"x11 28 28 55KR - 13/4 40 R13/4"x11 34 30 60 KR - 2 50 R2"x11 46 30 65


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d h OK

KUNF-7/16 4 7/16"x20UNF 3 14 14KUNF-1/2 6 1/2"x20UNF 4 14.5 17KUNF-9/6 8 9/6"x18UNF 5.5 15.5 19KUNF-3/4 10 3/4"x16UNF 7 17 22KUNF-7/8 13 7/8"x14UNF 10 19 27KUNF-11/16 16 11/16"x12UNF 13 22 32KUNF-15/16 19 15/16"x12UNF 16 23 36KUNF-15/8 25 15/8"x12UNF 21 25 46KUNF-17/8 32 17/8"x12UNF 28 28 55KUNF-2 40 2x12"UNF 34 30 60KUNF-21/2 50 21/2"x12UNF 46 30 65

Kupasti prikljuak / Male conical fitting

OZNAKA Part

Number

Nazivniprenik

DN

Navoj Thread

D d1 OK

M - 18 6 M18x1.5 4 24 M - 20 8 M20x1.5 5.5 24 M - 22 10 M22x1.5 7 27 M - 24 13 M24x1.5 10 30 M - 30 16 M30x2 13 36 M - 36 19 M36x2 16 46 M - 42 25 M42x2 21 55 M - 52 32 M52x2 28 65 M - 60 40 M60x2 34 75

M - 75 50 M70x2 46 90

Prirubniki prikljuak / Flange fitting

OZNAKA Part

Number

Nazivniprenik

DN d1 d2 h1 h L

P1 - 30 13 10.5 30 7 15 39

P1 - 38 19 16 38 7 15 40

P1 - 44 25 21 44 8 18 41

P1 - 50 32 28 50 8 18 46

P1 - 60 38 34 60 8 18 54

P1 - 70 50 45 70 10 20 66

P1 - 84 63 50 84 11 21 70

Prirubniki prikljuak / Flange fitting

OZNAKA Part

Number

Nazivniprenik

DN d1 d2 h1 h L

P2 - 32 13 9 32 8 16 41

P2 - 41 19 16 41 9 16 45

P2 - 48 25 21 48 10 18 45

P2 - 54 32 28 54 10 18 56

P2 - 64 38 34 64 13 22 67

P2 - 80 50 45 80 13 28 86

teko prikljuak /Plug-in fitting

OZNAKA Part

Number

Nazivni prenik

DN D d OK

T - 6 6 15 10 17

T - 10 10 20 14 22

T - 13 13 24 18 27

T - 16 16 26 21 30

T - 19 19 29 24 36

T - 25 25 39 31 46

T - 32 32 46 38 50

37 48

Oznaavanje fleksibilnih creva sa prikljucima / Designation hose assemblies

ematski prikaz pravilnog oitavanja meusobnih uglova izmeu povijenih

prikljuaka

Primer povijenih prikljuaka Proizvodimo lukove 90, 60, 45, kao i sve ostale uglove. Oblik i mere samog prikljuka date su na prethodnim stranicama od AM do T Primer: AM-L45 - oznaava povijeni prikljuak po 45, AM oblika

Example elbowe fittings We produce elbowe fittings with: 90, 60, 45, and other angles. Form and measures are given on pages at AM to T. Example: AM-L45 - elbove fitting 45, AM form

The angle always has to be indicated clockwise from the elbow fitting at the

back to one in the front

Prihvatna prirubnica / Flange E1

OZNAKA Part

Number

Nazivniprenik

DN D d A B

E1 - 54 13 30.6 9 54 46 E1 - 65 19 38.5 10.5 65 52 E1 - 70 25 44.9 10.5 70 59 E1 - 80 32 51.3 12.5 79 73 E1 - 94 38 60.8 13.5 94 83 E1 - 102 50 72 13.5 102 97

E1 - 114 63 84.5 13.5 114 110

Prihvatna prirubnica / Flange E2

OZNAKA Part

Number

Nazivni prenik

DN D d A B

E2 - 57 13 32.1 24.4 56 48 E2 - 72 19 41.6 32.2 71 60 E2 - 81 25 48 38.6 81 70 E2 - 95 32 54.4 44 95 78 E2 - 113

38 64 51 113 95 E2 - 134

50 79.8 67 133 114

Ravne eline prirubnice za zavarivanje / Flat steel flanges for welding

D NO

NP6 NP10 NP16 NP25 NP40 NO

15 80 95 95 95 95 1520 90 105 105 105 105 2032 100 115 115 115 115 3240 120 140 140 140 140 4050 130 150 150 150 150 5065 140 165 165 165 165 6580 165 185 185 185 185 80100 190 200 200 200 200 100100 210 220 220 235 235 100125 240 250 250 270 270 125150 265 285 285 285 330 150175 315 175200 320 340 340 360 350 200250 375 395 405 425 375 250300 440 445 460 485 450 300350 490 505 520 555 515 350400 540 565 580 620 680 400450 640 450500 645 670 715 730 660 500600 765 780 840 845 755 600

38 48

SPOJNI ELEMENTI / COUPLING ELEMENTS

Zaptivni prsten / Sealing ring

OZNAKA Part

Number

NavojThread

DN d d1 d2 h

FP1 - 4 4 9 6 8 10 FP1 - 6 6 11 8 10 10 FP1 - 8 8 13 10 12 10 FP1 - 10 10 15 12 14 11 FP1 - 13 13 18 15 17 11 FP1 - 16 16 21 18 20 12 FP1 - 19 19 25 22 24 15 FP1 - 25 25 31 28 30 16 FP1 - 32 32 40 35 38 19 FP1 - 40 38 46 42 43 20

FP1 - 50 50 58 50 53 20

Zaptivni prsten / Sealing ring

OZNAKA Part

Number

Navoj Thread

DN d d1 d2 h

FP2 - 4 4 11 8 10 10 FP2 - 6 6 13 10 12 10 FP2 - 8 8 15 12 14 10 FP2 - 10 10 18 14 17 11 FP2 - 13 13 21 16 20 12 FP2 - 16 16 25 20 24 15 FP2 - 19 19 31 25 30 16 FP2 - 25 25 40 30 38 19 FP2 - 32 32 50 38 44 22 FP2 - 38 38 58 46 54 24 FP2 - 50 50 66 54 62 26

Spojnica / Coupling

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d OK

S1 - 4 4 M12x1.5 3 14 S1 - 6 6 M14x1.5 4 17 S1 - 8 8 M16x1.5 5.5 19 S1 - 10 10 M18x1.5 7 22 S1 - 13 13 M22x1.5 10 27 S1 - 16 16 M26x1.5 13 32 S1 - 19 19 M30x1.5 16 36 S1 - 25 25 M38x1.5 21 46 S1 - 32 32 M45x1.5 28 55 S1 - 40 38 M52x1.5 34 65 S1 - 50 50 M65x2 46 75

Spojnica / Coupling

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d OK

S2 - 4 4 R1/4"x19 3 14 S2 - 6 6 R1/4"x19 4 17 S2 - 8 8 R3/8"x19 5.5 19 S2 - 10 10 R1/2"x14 7 22 S2 - 13 13 R5/8"x14 10 27 S2 - 16 16 R3/4"x14 13 32 S2 - 19 19 R1"x11 16 36 S2 - 25 25 R11/4"x11 21 46 S2 - 32 32 R11/2"x11 28 55 S2 - 40 38 R13/4"x11 34 65 S2 - 50 50 R2"x11 46 75

Spojnica / Coupling

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d L OK

S3 - 4 4 M12x1.5 3 25 14S3 - 6 6 M14x1.5 4 25 17S3 - 8 8 M16x1.5 5.5 25 19S3 - 10 10 M18x1.5 7 25 22S3 - 13 13 M22x1.5 10 30 27S3 - 16 16 M26x1.5 13 30 32S3 - 19 19 M30x1.5 16 30 36S3 - 25 25 M38x1.5 21 35 46S3 - 32 32 M45x1.5 28 35 55S3 - 40 38 M52x1.5 34 40 65

S3 - 50 50 M65x2 46 44 75

Spojnica / Coupling

OZNAKA Part

Number

Nazivni prenik

DN

NavojThread

D d L OK

S4 - 4 4 R1/4"x19 3 25 14S4 - 6 6 R1/4"x19 4 25 17S4 - 8 8 R3/8"x19 5.5 25 19S4 - 10 10 R1/2"x14 7 25 22S4 - 13 13 R5/8"x14 10 30 27S4 - 16 16 R3/4"x14 13 30 32S4 - 19 19 R1"x11 16 30 36S4 - 25 25 R11/4"x11 21 35 46S4 - 32 32 R11/2"x11 28 35 55S4 - 40 38 R13/4"x11 34 40 65S4 - 50 50 R2"x11 46 44 75

39 48

Spojnica - reducir / Reducir coupling

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR1 - 4 4 M14x1.5 M12x1.5 3 25 14

SR1 - 6 6 M16x1.5 M14x1.5 4 25 17

SR1 - 8 8 M18x1.5 M16x1.5 5.5 25 19

SR1 - 10 10 M22x1.5 M18x1.5 7 25 22

SR1 - 13 13 M26x1.5 M22x1.5 10 30 27

SR1 - 16 16 M30x1.5 M26x1.5 13 30 32

SR1 - 19 19 M38x1.5 M30x1.5 16 30 36

SR1 - 25 25 M45x1.5 M38x1.5 21 35 46

SR1 - 32 32 M52x1.5 M45x1.5 28 35 55

SR1 - 40 38 M60x2 M52x1.5 34 40 60

SR1 - 50 50 M68x2 M60x2 46 44 70


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR2 - 4 4 M12x1.5 R1/4"x19 3 25 14

SR2 - 6 6 M14x1.5 R1/4"x19 4 25 17

SR2 - 8 8 M16x1.5 R3/8"x19 5.5 25 19

SR2 - 10 10 M18x1.5 R1/2"x14 7 25 22

SR2 - 13 13 M22x1.5 R5/8"x14 10 30 27

SR2 - 16 16 M26x1.5 R3/4"x14 13 30 32

SR2 - 19 19 M30x1.5 R1"x11 16 30 36

SR2 - 25 25 M38x1.5 R11/4"x11 21 35 46

SR2 - 32 32 M45x1.5 R11/2"x11 28 35 55

SR2 - 40 38 M52x1.5 R13/4"x11 34 40 65

SR2 - 50 50 M60x2 R2"x11 46 44 75

40 48


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR3 - 4 4 R1/4"x19 R1/4"x19 3 25 14

SR3 - 6 6 R3/8"x19 R1/4"x19 4 25 17

SR3 - 8 8 R1/2"x14 R3/8"x19 5.5 25 19

SR3 - 10 10 R5/8"x14 R1/2"x14 7 25 22

SR3 - 13 13 R3/4"x14 R5/8"x14 10 30 27

SR3 - 16 16 R1"x11 R3/4"x14 13 30 32

SR3 - 19 19 R11/4"x11 R1"x11 16 30 41

SR3 - 25 25 R11/2"x11 R11/4"x11 21 35 46

SR3 - 32 32 R13/4"x11 R11/2"x11 28 35 55

SR3 - 40 38 R2"x11 R13/4"x11 34 40 60

SR3 - 50 50 R21/4"x11 R2"x11 46 44 70


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR4 - 4 4 M14x1.5 M12x1.5 3 25 14

SR4 - 6 6 M16x1.5 M14x1.5 4 25 17

SR4 - 8 8 M18x1.5 M16x1.5 5.5 25 19

SR4 - 10 10 M22x1.5 M18x1.5 7 25 22

SR4 - 13 13 M26x1.5 M22x1.5 10 30 27

SR4 - 16 16 M30x1.5 M26x1.5 13 30 32

SR4 - 19 19 M38x1.5 M30x1.5 16 30 41

SR4 - 25 25 M45x1.5 M38x1.5 21 35 46

SR4 - 32 32 M52x1.5 M45x1.5 28 35 55

SR4 - 40 38 M60x2 M52x1.5 34 40 60

SR4 - 50 50 M68x2 M60x2 46 44 70

41 48


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR5 - 4 4 M12x1.5 R1/4"x19 3 25 14

SR5 - 6 6 M14x1.5 R1/4"x19 4 25 17

SR5 - 8 8 M16x1.5 R3/8"x19 5.5 25 19

SR5 - 10 10 M18x1.5 R1/2"x14 7 25 22

SR5 - 13 13 M22x1.5 R5/8"x14 10 30 27

SR5 - 16 16 M26x1.5 R3/4"x14 13 30 32

SR5 - 19 19 M30x1.5 R1"x11 16 30 41

SR5 - 25 25 M38x1.5 R11/4"x11 21 35 46

SR5 - 32 32 M45x1.5 R11/2"x11 28 35 55

SR5 - 40 38 M52x1.5 R13/4"x11 34 40 60 SR5 - 50 50 M60x2 R2"x11 46 44 70


OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D1

Navoj Thread

D2 d L OK

SR6 - 4 4 R1/4"x19 R1/4"x19 3 25 14

SR6 - 6 6 R3/8"x19 R1/4"x19 4 25 17

SR6 - 8 8 R1/2"x14 R3/8"x19 5.5 25 19

SR6 - 10 10 R5/8"x14 R1/2"x14 7 25 22

SR6 - 13 13 R3/4"x14 R5/8"x14 10 30 27

SR6 - 16 16 R1"x11 R3/4"x14 13 30 32

SR6 - 19 19 R11/4"x11 R1"x11 16 30 41

SR6 - 25 25 R11/2"x11 R11/4"x11 21 35 46

SR6 - 32 32 R13/4"x11 R11/2"x11 28 35 55

SR6 - 40 38 R2"x11 R13/4"x11 34 40 60

SR6 - 50 50 R21/4"x11 R2"x11 46 44 70

42 48

Spojnica - prikljuak / coupling fitting

OZNAKA Part

Number

Nazivni prenik

DN

Navoj Thread

D d L OK

SP1 - 4 4 M12x1.5 3 18 14SP1 - 6 6 M14x1.5 4 18 17SP1 - 8 8 M16x1.5 5.5 18 19SP1 - 10 10 M18x1.5 7 18 22SP1 - 13 13 M22x1.5 10 21 27SP1 - 16 16 M26x1.5 13 21 32SP1 - 19 19 M30x1.5 16 21 36SP1

Documents

Pneumatik Flex