Upload
turcuflorin
View
1.057
Download
27
Embed Size (px)
Citation preview
2
Hinweise
Diese Preisliste gilt für die in unseren Maßkatalogen 2200/D und 0105 aufgeführten Wälz- undGehäuselager sowie für Zubehörteile.
Preise, die in dieser Liste nicht enthalten sind, und Preise für alle anderen Lagerausführungenund Zubehörteile, bitten wir bei Bedarf bei uns anzufragen.
Nicht gängige Typen sowie Sonderausführungen gängiger Lager erfordern teilweise Einzel-anfertigung. Den daraus resultierenden Preisaufschlag geben wir ebenfalls auf Anfragebekannt.
Die Angaben in den Spalten „T“ und „Q“ gelten nur für den französischen Markt.
In den Preisen ist keine Mehrwertsteuer enthalten; sie wird bei Berechnung gesondert auf-geführt.
Um die hohen administrativen Kosten wenigstens teilweise decken zu können, berechnen wirfür jeden Auftrag mindestens 250,00 €, auch wenn der Auftragswert nach Abzug vereinbarterNachlässe unter 250,00 € liegt.
Alle bisherigen Preislisten werden hiermit ungültig. Preisänderungen sind vorbehalten.
NTN WÄLZLAGER (EUROPA) GMBH
Gedruckt auf chlorfrei gebleichtem Papier.
Information
This price list refers to bearings, housing and accessories detailed in our Catalogues Nos.2200/D and 0105.
Prices for all other designs and accessories not included in this list may be obtained on appli-cation, depending on availability.
Quotations for non-common types and special designs can be given upon request.
The information shown in the columns “T” and “Q” are only valid for the French market.
All prices exclude VAT.
To cover at least part of the costs for small orders we will invoice a minimum order charge of 250,00 € even if the total order amount is less than 250,00 € after discounts.
This price list supersedes all previous price lists. We reserve the right to change priceswithout notice.
NTN WÄLZLAGER (EUROPE) GMBH
Printed on paper bleached without chlorine.
3
RemarquesCe tarif annule et remplace le tarif précédent.
Les prix indiqués s’entendent unitaires hors taxes.
Afin de couvrir partiellement les coûts de traitement élevés des petites commandes nousappliquons une facturation minimale de 25,00 EURO H.T.
Veuillez nous consulter pour les symboles ne figurant pas au tarif.
NTN FRANCE S.A.
Imprimé sur papier écologique fabriqué avec une pâte non blanchie au chlore.
AvvertenzaQuesto listino si riferisce ai cuscinetti, supporti e accessori descritti nei cataloghi NTN n° 2202-II/I, 2300/I, 2400/I.
I prezzi degli articoli non contenuti in questo listino possono essere forniti su richiesta, secon-do la disponibilità.
I prezzi per i tipi non standard e per le esecuzioni speciali possono essere forniti su richiesta. I dati contenuti nelle colonne "T” e "Q” sono validi solo per il mercato francese.I prezzi non sono comprensivi di IVA.
Per coprire, almeno parzialmente, i costi amministrativi, verrà addebitato per ogni ordine unminimo di 250,00 € anche nel caso in cui l’ammontare dell’ordine, dopo l’applicazione deglisconti, fosse inferiore a 250,00 €.
Questo listino sostituisce tutti i precedenti. NTN si riserva il diritto di eventuali variazioni deiprezzi.
NTN WÄLZLAGER (EUROPA) GMBH
InformaciónLa presente tarifa hace referencia a rodamientos, soportes y accesorios incluidos en losCatálogos Nº 2200/D y 0105.
Para todas aquellas referencias no incluidas en esta lista, rogamos consulten a su represen-tante local NTN más cercano.
La información mostrada en les columnas "T” y "Q” son válidos únicamente para el mercadoFrancés.Los precios indicados se entienden unitarios y excluyen IVA.
Con el fin de cubrir parcialmente los elevados costes de manipulación de pequeños pedidos,se aplicará una facturación mínima de 250,00 Euro + IVA
Esta tarifa anula y remplaza todas las precedentes. Queda reservado el derecho a modificar-la sin previo aviso.
NTN Wälzlager (Europa) GMBHImpreso en papel blanqueado sin cloro
4
Index ______________________________________________________________ 09
Vor- und Nachsetzzeichen ____________________________________________ 12
Kugellager und Rollenlager
Rillenkugellager ______________________________________________________ 22
Pendelkugellager ____________________________________________________ 32
Schrägkugellager (einschl. Hochgenauigkeitslager) ______________________ 34
Zylinderrollenlager____________________________________________________ 37
Pendelrollenlager ____________________________________________________ 43
Kegelrollenlager______________________________________________________ 48
Kegelrollenlager (Zoll) ________________________________________________ 51
Axial-Rillenkugellager ________________________________________________ 70
Nadellager __________________________________________________________ 72
Stehlagergehäuse ____________________________________________________ 87
Spannhülsen ________________________________________________________ 88
Abziehhülsen ________________________________________________________ 90
Sicherungsbleche, Muttern ____________________________________________ 91
Gehäuselager
Kurzzeichen und Typenübersicht ______________________________________ 92
Kugellagereinsätze für Gehäuse________________________________________ 94
Stehlager____________________________________________________________ 101
Flanschlager ________________________________________________________ 101
Schiebelager ________________________________________________________ 114
Spannplattenlager____________________________________________________ 118
Spannrahmenlager __________________________________________________ 122
Gußgehäuselager mit Dichtkappen ____________________________________ 126
Zubehör ____________________________________________________________ 137
Liefer- und Zahlungsbedingungen ______________________________________ 140
Inhaltsverzeichnis
5
Index ______________________________________________________________ 09
Prefix / Suffix ________________________________________________________ 12
Ball bearings and Roller bearings
Deep groove ball bearings ____________________________________________ 22
Self-aligning ball bearings ____________________________________________ 32
Angular contact ball bearings (incl. precision) ____________________________ 34
Cylindrical roller bearings ____________________________________________ 37
Spherical roller bearings ______________________________________________ 43
Tapered roller bearings________________________________________________ 48
Tapered roller bearings, inch __________________________________________ 51
Thrust ball bearings __________________________________________________ 70
Needle roller bearings ________________________________________________ 72
Plummer block ______________________________________________________ 87
Adapter sleeves______________________________________________________ 88
Withdrawal sleeves __________________________________________________ 90
Lockwasher, locknut__________________________________________________ 91
Bearing units
Basic part number and common variations ______________________________ 92
Bearing unit inserts __________________________________________________ 94
Pillow blocks ________________________________________________________ 101
Flanged units ________________________________________________________ 101
Cartridge units ______________________________________________________ 114
Take-up units ________________________________________________________ 118
Mini stretcher units __________________________________________________ 122
Bearing units with end covers ________________________________________ 126
Accessories ________________________________________________________ 137
Terms and Conditions of Sale__________________________________________ 140
Contents
6
Sommaire __________________________________________________________ 09
Prefixes / Suffixes ____________________________________________________ 12
Roulements à billes et à rouleaux
Roulements rigides à billes ____________________________________________ 22
Roulements à rotule sur billes__________________________________________ 32
Roulements à billes à contact oblique (de precison) ______________________ 34
Roulements à rouleaux cylindriques ____________________________________ 37
Roulements à rotule sur rouleaux ______________________________________ 43
Roulements à rouleaux coniques ______________________________________ 48
Roulements à rouleaux coniques, cotes pouces ________________________ 51
Butées à billes ______________________________________________________ 70
Roulements à aiguilles ________________________________________________ 72
Paliers à semelle ____________________________________________________ 87
Manchons de serrage ________________________________________________ 88
Manchons de démontage ____________________________________________ 90
Rondelles, écrous de serrage __________________________________________ 91
Paliers auto-aligneurs
Designation et gamme ________________________________________________ 92
Roulements de palier ________________________________________________ 94
Paliers à semelle ____________________________________________________ 101
Paliers à flasque ____________________________________________________ 101
Frettes cylindriques en fonte __________________________________________ 114
Paliers tendeur ______________________________________________________ 118
Coulisseau – tendeurs ________________________________________________ 122
Paliers en fonte avec couvercle d’étanchéité ____________________________ 126
Accessoires ________________________________________________________ 137
Conditions de vente __________________________________________________ 140
Table des Matières
7
Indice ______________________________________________________________ 09
Prefisso / Suffisso __________________________________________________ 12
Cuscinetti a sfere e a rulli
Cuscinetti a sfere ____________________________________________________ 22
Cuscinetti orientabili a sfere __________________________________________ 32
Cuscinetti obliqui a sfere ____________________________________________ 34
Cuscinetti a rulli cilindrici ______________________________________________ 37
Cuscinetti orientabili a sfere __________________________________________ 43
Cuscinetti a rulli conici ________________________________________________ 48
Cuscinetti a rulli conici, pollici ________________________________________ 51
Cuscinetti assiali ____________________________________________________ 70
Cucinetti a rullini ____________________________________________________ 72
Unità di supporto ____________________________________________________ 87
Bussole di compressione ____________________________________________ 88
Bussole di trazione __________________________________________________ 90
Ghiere, Rosette ______________________________________________________ 91
Unità di supporto complete
Codici e varianti comuni ______________________________________________ 92
Cuscinetti a sfere (inserti) ____________________________________________ 94
Supporti ritti in ghisa ________________________________________________ 101
Supporti a flangia ____________________________________________________ 101
Cartucce cilindriche in ghisa __________________________________________ 114
Supporti scorrevoli __________________________________________________ 118
Supporti registrabili __________________________________________________ 122
Supporti con coperchio parapolvere __________________________________ 126
Accessori __________________________________________________________ 137
Termini e condizioni di vendita ________________________________________ 140
Indice
8
Indice ______________________________________________________________ 09
Prefijo/Sufijo ________________________________________________________ 12
Rodamientos rígidos de bolas y rodillos
Rodamientos rígidos de Bolas ________________________________________ 22
Rodamientos de bolas autoalineables __________________________________ 32
Rodamientos de bolas con contacto angular ____________________________ 34
Rodamientos de rodillos cilíndricos ____________________________________ 37
Rodamientos de rodillos a rótula ______________________________________ 43
Rodamientos de rodillos cónicos ______________________________________ 48
Rodamientos de rodillos cónicos en pulgadas __________________________ 51
Rodamientos axiales de bolas ________________________________________ 70
Rodamientos de agujas ______________________________________________ 72
Soportes ____________________________________________________________ 87
Manguitos de montaje ________________________________________________ 88
Manguitos de desmontaje ____________________________________________ 90
Tuercas y Arandelas __________________________________________________ 91
Soportes
Referencia básica y variaciones ________________________________________ 92
Rodamientos para soportes __________________________________________ 94
Soportes de pié______________________________________________________ 101
Soportes de brida ____________________________________________________ 101
Soporte tipo cartucho ________________________________________________ 114
y otros ______________________________________________________________ 118
y otros ______________________________________________________________ 122
Soporte con tapa guardapolvos________________________________________ 126
Accesorios __________________________________________________________ 137
Términos y condiciones de venta ______________________________________ 140
Indice
IndexIndex
SommaireIndiceIndice
9
12 (K) ________________________ 32
13 (K) ________________________ 32
160 __________________________ 22
1R ____________________________ 78
213 (K) ________________________ 43
22 (K) ________________________ 33
222 (K) ________________________ 43
23 (K) ________________________ 33
223 (K) ________________________ 44
223 UA ________________________ 44
230 (K) ________________________ 45
231 (K) ________________________ 45
232 (K) ________________________ 46
239 __________________________ 46
240 (K) ________________________ 46
241 (K) ________________________ 47
3.. ____________________________ 51
302 __________________________ 48
303 __________________________ 48
303 D (313) ____________________ 48
32 ____________________________ 35
320 __________________________ 49
322 __________________________ 49
323 __________________________ 50
323 C (323 B) __________________ 50
33 ____________________________ 35
330 __________________________ 50
331 __________________________ 50
332 __________________________ 50
511 __________________________ 70
512 __________________________ 70
513 __________________________ 71
514 __________________________ 71
52 ____________________________ 36
53 ____________________________ 36
5620 __________________________ 71
6.. ____________________________ 22
60 ____________________________ 23
60/.. __________________________ 28
62 ____________________________ 25
62/.. __________________________ 28
63 ____________________________ 27
632 __________________________ 28
63/.. __________________________ 28
64 ____________________________ 28
68 ____________________________ 29
69 ____________________________ 30
70 GN P4 ______________________ 35
72 ____________________________ 34
72 GN P4 ______________________ 35
73 ____________________________ 34
7420 __________________________ 71
811 __________________________ 83
812 __________________________ 83
IndexIndexSommaireIndiceIndice
10
AH 23 (X) ______________________ 90
AH 3 (X) ______________________ 90
AH 30 (X) ______________________ 90
AH 31 (X) ______________________ 90
AH 32 (X) ______________________ 90
AN (KM) ______________________ 91
AS ____________________________ 82
AW (MB) ______________________ 91
AXK __________________________ 82
BK ____________________________ 74
BL 2 __________________________ 31
BL 3 __________________________ 31
GS 811 ________________________ 83
GS 812 ________________________ 83
H 2 (X) ________________________ 88
H 23 (X) ______________________ 88
H 3 (X) ________________________ 88
H 30 __________________________ 89
H 31 __________________________ 89
HK____________________________ 73
K ____________________________ 72
K 811 ________________________ 83
K 812 ________________________ 83
KR ____________________________ 85
KRV __________________________ 86
N 2 __________________________ 37
N 3 __________________________ 37
NA 22 ________________________ 84
NA 48 ________________________ 77
NA 49 ________________________ 78
NA 69 ________________________ 78
NATR ________________________ 84
NATV ________________________ 84
NJ 2 __________________________ 38
NJ 22 ________________________ 38
NJ 23 ________________________ 39
NJ 3 __________________________ 39
NJ 4 __________________________ 39
NK____________________________ 75
NK + 1 R ______________________ 77
NKS __________________________ 76
NKS + 1 R ____________________ 77
NKX __________________________ 81
NKXR ________________________ 81
NK1A ________________________ 81
NN 30 ________________________ 39
NU 10 ________________________ 39
NU 2 __________________________ 40
NU 3 __________________________ 40
NU 4 __________________________ 40
NU 22 ________________________ 41
NU 23 ________________________ 41
NUKR ________________________ 86
NUP 2 ________________________ 41
IndexIndex
SommaireIndiceIndice
11
NUP 3 ________________________ 41
NUP 22________________________ 42
NUP 23________________________ 42
NUTR 2 ______________________ 85
NUTR 3 ______________________ 85
R ____________________________ 22
RNA 22________________________ 84
RNA 48________________________ 76
RNA 49________________________ 76
RNA 69________________________ 76
SN 5 __________________________ 87
SN 6 __________________________ 87
WS 811________________________ 83
WS 812________________________ 83
Bemerkung:
Index für Gehäuselager
siehe Seite ____________________ 92
Remark:
Index for Bearing Units page __ 92
Remarque:
Tableau des paliers
auto-aligneurs voir page ______ 92
Nota:
Indice per Unità di supporto
pagina ________________________ 92
Nota:
Indice de Soportes completos,
página ________________________ 92
Vor- und Nachsetzzeichen
Zeichen Zeichen
12
Vorsetzzeichen4T- NTN 4-Top-Kegelrollenlager5S- Hybridlager ( keramische Wälzkörper )E- Lager aus EinsatzstahlEC- Lager mit PolyamidringenET- NTN ET-Kegelrollenlager F- Lager aus rostfreiem StahlFL- Flansch am AußenringHL- Sonderlager für Mangelschmierungs-
bedingM- Beschichtete LagerN- Lager aus SondermaterialTK- Lager für höchste DrehzahlenTM- Lager mit besonders hoher LebensdauerTSn- Wärmestabilisiert für Temperaturen bis …TS2- Wärmestabilisierung bis 160°CTS3- Wärmestabilisierung bis 200°CTS4- Wärmestabilisierung bis 250°C
Berührungswinkel SchrägkugellagerA1) Standard 30°B Standard 40°C Standard 15°
Berührungswinkel KegelrollenlagerB1) über 10° bis 17°C über 17° bis 24°D über 24° bis 32°
1) Bemerkung: A und B werden nicht in derLagerbezeichnung angegeben
Vor- und Nachsetzzeichen
Zeichen Zeichen
13
InnenkonstruktionenA modifizierte InnengeometrieE Verstärkte Innenkonstruktion bei
ZylinderrollenlagerU International austauschbare Kegelrollen-
lagerUA Sonderkonstruktion Pendelrollenlager
VibrationsanwendungenR Nicht international austauschbare Kegel-
rollenlagerST Kegelrollenlager mit niedrigerem Reib-
momentHT Zylinderrollenlager für hohe Axial-
belastungen
KäfigeF1 Stahl-MassivkäfigeF3 Massivkafig aus AutomatenstahlG1 Einteiliger Messing-Massivkäfig für
ZylinderrollenlagerG2 Bolzenkäfige für KegelrollenlagerJ StahlblechkäfigL1 Messing-MassivkäfigT1 Glasfaser - KäfigT2 Polyamid - KäfigV vollrollige Ausführung / ohne Käfig
Dicht- oder DeckscheibenLLB nichtberührende Dichtscheiben, beid-
seitigLLU berührende Dichtscheiben, beidseitigLLH berührende Dichtscheibe mit EntlüftungZZ Metall - Deckscheiben, beidseitigZZA Metall - Deckscheiben, demontierbar
Innen- bzw. Außenring-AusführungenK Kegelige lnnenringbohrung (Kegel 1:12)K30 Kegelige lnnenringbohrung (Kegel 1:30)N Ringnut im Außenring ohne SprengringNR Ringnut mit Sprengring im AußenringD Lager mit Schmierbohrungen D1 Lager mit Schmierbohrungen und
Umfangsnut im Aussenring
Paarweise AnordnungDB O-AnordnungDF X-AnordnungDT Tandem-AnordnungD2 Lager gepaartG Universale Anordnung in X-, 0- oder
Tandem möglich+ x Zwischenring (x = Nennmaß des
Zwischenringes in mm)
Lagerluft bzw. VorspannungC2 Radialluft kleiner als normalCN Radialluft normalC3 Radialluft größer als normalC4 Radialluft größer als C3C5 Radialluft größer als C4CM Eingeengte Radialluft für Lager in
E-MotorenNA Nicht austauschbare Lagerteile/GL Leichte Vorspannung/GN Normale Vorspannung/GM Mittlere Vorspannung/GH Hohe Vorspannung
GenauigkeitsklassenP6 Genauigkeitsklasse 6 (JIS)P6X Genauigkeitsklasse, Kegelrollenlager
(JIS)P5 Genauigkeitsklasse 5 (JIS)P4 Genauigkeitsklasse 4 (JIS)P2 Genauigkeitsklasse 2 (JIS)2 Genauigkeitsklasse 2
Kegelrollenlager mit Zollabmessungen3 Genauigkeitsklasse 3
Kegelrollenlager mit Zollabmessungen0 Genauigkeitsklasse 0
Kegelrollenlager mit Zollabmessungen00 Genauigkeitsklasse 00
Kegelrollenlager mit ZollabmessungenUP Ultra - Präzisions-Klasse gemäss NTNVS1 Sondertoleranz für PendelrollenlagerVS2 Sondertoleranz für Pendelrollenlager
Schmierung/2AS Shell Alvania Nr. 2/3AS Shell Alvania Nr. 3/8A Shell Alvania EP Nr. 2 ( Schwerlastfett )/5C Chevron SRI-2/3E ESSO-Beacon 325/5K MULTEMP SRL /LP03 Festschmierstoff
Prefix/Suffix
Code Code
14
Prefix code4T- NTN 4-Top tapered roller bearings5S- ceramic rolling element bearingsE- carburized alloy steel bearingsEC- bearings with two plastic inlaysET- NTN ET tapered roller bearingsF- stainless steel bearingsFL- flange on outer-ringHL- HL (high lubrication) roller bearingsM- plated bearingsN- bearings from special materialTK- bearings for highest speedTM- bearings with increased life-timeTSn- heat-stabilized for temperatures up to ... TS2- dimension stabilized bearing for high
temperature use (to 160° C)TS3- dimension stabilized bearing for high
temperature use (to 200° C)TS4- dimension stabilized bearing for high
temperature use (to 250° C)
Angular contact ball bearingsA1) Standard contact angle 30°B Standard contact angle 40°C Standard contact angle 15°
Tapered roller bearingsB1) Contact angle over 10° to/including 17°C Contact angle over 17° to/including 24°D Contact angle over 24° to/including 32°
1) note: prefix A and B are not mentioned inbearing designation
Prefix/Suffix
Code Code
15
Internal modifications codeA modified inner geometryE strengthend inner geometry for
cylindrical roller bearingsU Internationally interchangeable tapered
roller bearingsUA special design spherical roller bearings
for vibration machineryR Non-internationally interchangeable
tapered roller bearingsST Low torque tapered roller bearingsHT High axial load use cylindrical roller
bearings
Cage codeF1 Machined carbon steel cageF3 Machined cage from special steelG1 High strength machined brass rivet-less
cage with square holesG2 Pin type cageJ Pressed steel cageL1 High strength, machined brass cageT1 phenolic cageT2 Plastic mold cageV full complement type / no cage
Seal / Shield codeLLB Synthetic rubber seal (non-contact type)LLU Synthetic rubber seal (contact type)LLH Synthetic rubber seal (low-torque type)ZZ steel shieldsZZA metal shields, separable
Raceway configuration codeK Tapered inner ring bore, standard taper
ratio 1:12K30 Tapered inner ring bore, standard taper
ratio 1:30N Snap ring grooveNR Snap ring groove with snap ringD Lubrication hole/lubrication grooveD1 bearing with lubrication holes and
circumferential groove on outer ring
Duplex arrangement codeDB Back-to-back arrangementDF Face-to-face arrangementDT Tandem-arrangementD2 Two matched, paired bearingsG Flush ground+ x Spacer (x= spacer’s standard width
dimensions)
Internal clearance/preload codeC2 Internal clearance less than normalCN Normal clearanceC3 Internal clearance greater than normalC4 Internal clearance greater than C3C5 Internal clearance greater than C4CM Radial internal clearance for electric
motor useNA bearing elements not exchangeable/GL Light preload/GN Normal preload/GM Medium preload/GH Heavy preload
Tolerance codeP6 JIS Class 6P6X precission class tapered roller bearings
(JIS)P5 JIS Class 5P4 JlS Class 4P2 JIS Class 22 (ABMA) Class 2
Inch series tapered roller bearing3 Inch series tapered roller bearing
(ABMA) Class 30 Inch series tapered roller bearing
(ABMA) Class 000 Inch series tapered roller bearing
(ABMA) Class 00UP Ultra-precision class according to NTNVS1 special tolerance for spherical roller
bearingsVS2 special tolerance for spherical roller
bearings
Lubrication code/2AS Shell Alvania 2 grease/3AS Shell Alvania 3 grease/8A Shell Alvania EP2 grease/5C Chevron SRI-2/3E Esso-Beacon 325/5K MULTEMP SRL /LP03 Solid grease
Prefixes/Suffixes
Symbole Symbole
16
Prefixes4T- Roulement à rouleaux coniques en acier
de cémentation renforcé 5S- Eléments roulants en céramiqueE- Acier de cémentationEC- Roulement de compensation à la
dilatation thermiqueET- Roulements à rouleaux coniques NTN
type ETF- Roulement en acier inoxydableFL- Roulement avec épaulement sur la
bague extérieureHL- Roulements à rouleaux avec
traitement HLM- Roulements avec revêtementN- Matière spécialeTK- Roulements pour très hautes vitessesTM- Roulements à durée de vie augmentéeTSn- Roulements pour températures de
fonctionnement élevées …TS2- Traitement de stabilisation pour
température jusqu'à 160°CTS3- Traitement de stabilisation pour
température jusqu'à 200°CTS4- Traitement de stabilisation pour
température jusqu'à 250°C
Roulements à contact obliqueA1) Angle de contact 30°B Angle de contact de 40°C Angle de contact de 15°
Roulements à rouleaux coniquesB1) Angle de contact supérieur
à 10° jusqu'à 17°C Angle de contact supérieur
à 17° jusqu'à 24°D Angle de contact supérieur
à 24° jusqu'à 32°
1) Remarques: A et B ne sont pas repris dans laréférence
Prefixes/Suffixes
Symbole Symbole
17
Construction interneA Modification interneE Roulements à rouleaux cylindriques à
capacitè de charge augmentéeU Roulements à rouleaux coniques
interchangeables internationalementUA Roulements à rotule sur rouleaux pour
application vibranteR Roulements à rouleaux coniques non
interchangeables internationalementST Roulements à rouleaux coniques à faible
couple de trainéeHT Roulements à rouleaux cylindriques pour
charge axiales élevées
CageF1 Cage massive en acierF3 Cage massive en acier de décolletageG1 Cage massive en laitonG2 Cage à broches pour roulements à
rouleaux coniquesJ Cage en tôle d’acierL1 Cage massive en laiton rivetéeT1 Cage en tissu bakeliséT2 Cage en matière plastiqueV Sans cage
Symbole de Ia protectionLLB Joints d’étanchéité sans frottementLLU Joints d’étanchéité avec frottementLLH Joints d’étanchéité avec frottement
réduitZZ Flasques de protectionZZA Flasques de protection démontable
Configuration des baguesK Alésage conique. Conicité 1:12K30 Alésage conique. Conicité 1:30N Rainure sur Ia surface extérieureNR Rainure et segment d’arrêt sur Ia surface
extérieure de Ia bague extérieureD Trous de lubrificationD1 Rainure et trous de graissage dans a
bague extérieure
Symbole d’appairageDB Disposition en O - dos-à-dosDF Disposition en X - face-à-faceDT Disposition en T - tandemD2 Roulements appairésG Roulements pour appairage universel+ x Entretoise, x est Ia cote nominale de Ia
largeur de l'entretoise
Symbole du jeu de roulementC2 Jeu plus petit que le jeu normalCN Jeu normalC3 Jeu plus grand que le jeu normalC4 Jeu plus grand que C3C5 Jeu plus grand que C4CM Jeu radial réduit pour moteurs
électriquesNA Bagues non interchangeables/GL Précharge légère/GN Précharge normale/GM Précharge moyenne/GH Précharge haute
Symbole de Ia classe de precisionP6 Classe de précision JIS 6P6X Classe de précision,roulements à
rouleaux coniquesP5 Classe de précision JIS 5P4 Classe de précision JIS 4P2 Classe de précision JIS 22 Classe de précision 2
Roulements à rouleaux coniques encotes pouces
3 Classe de précision 3, roulements à rouleaux coniques cotes pouces
0 Classe de précision 0, roulements à rouleaux coniques cotes pouces
00 Classe de précision 00 ,roulements à rouleaux coniques cotes pouces
UP Ultra précision NTNVS1 Tolerance spéciale pour roulement de
criblesVS2 Tolerance spéciale pour roulement de
cribles
Lubrification/2AS Graisse Shell Alvania 2/3AS Graisse Shell Alvania 3/8A Graisse Shell Alvania EP2/5C Graisse Chevron SRI-2/3E Graisse Esso Beacon 325/5K Graisse Multemp SRL/LP03 Graisse solide
Prefissi e Suffissi
Simboli Simboli
18
Prefissi4T- Cuscinetti a rulli conici tipo 4T
(cementati)5S- Cuscinetti con corpi volventi in ceramicaE- Cuscinetti in acciaio cementatoEC- Cuscinetti con inserti in poliammide
sull'anello esternoET- Cuscinetti a rulli conici tipo ETF- Cuscinetti in acciaio inossidabileFL- Flangia sull'anello esternoHL- Cuscinetti per condizioni di lubrificazione
specialiM- Cuscinetti con rivestimentoN- Cuscinetti in materiale specialeTK- Cuscinetti per elevato numero di giriTM- Cuscinetti con elevata durataTSn- Cuscinetto stabilizzato termicamente
fino a …TS2- Cuscinetto stabilizzato termicamente
fino a 160°CTS3- Cuscinetto stabilizzato termicamente
fino a 200°CTS4- Cuscinetto stabilizzato termicamente
fino a 250°C
Angolo di contatto per i cuscinetti obliqui a sfereA1) Standard 30°B Standard 40°C Standard 15°
Angolo di contatto per cuscinetti a rulli coniciB1) da 10° a 17°C oltre 17° fino a 24°D oltre 24° fino a 32°
1) Nota: A e B non vengono indicate nelladesignazione del cuscinetto
Prefissi e Suffissi
Simboli Simboli
19
Geometria internaA Geometria interna modificataE Geometria interna rinforzata per
cuscinetti a rulli cilindriciU Cuscinetti a rulli conici intercambiabili
(standard internazionale)UA disegno speciale per cuscinetti sferici
dedicati a macchine vibrantiR Cuscinetti a rulli conici non
intercambiabili ST Cuscinetti a rulli conici con bassa coppia
di attritoHT Cuscinetti a rulli cilindrici per elevati
carichi assiali
GabbieF1 Gabbie in acciaio massiccioF3 Gabbie in acciaio speciale massiccioG1 Gabbia in ottone, in un solo pezzo,
per cuscinetti a rulli cilindriciG2 Gabbie rivettate per cuscinetti a rulli
coniciJ Gabbia in lamieraL1 Gabbia in ottoneT1 Gabbia in plastica, rinforzata con fibre
di vetroT2 Gabbia in poliammideV No gabbia (cuscinetto a pieno
riempimento di rulli)
TenuteLLB Tenute senza contatto, su due latiLLU tenute a contatto, su due latiLLH Tenute a contatto, con bassa coppia
d’attritoZZ Schermi in metallo, su due latiZZA Schermi in metallo, smontabili
Anello interno o esternoK Foro conico (conicità 1:12)K30 Foro conico (conicità 1:30)N Scanalatura per anello elastico
sull’anello esterno (solo scanalatura, no anello )
NR Scanalatura e anello elastico sull’anelloesterno (scanalatura + anello)
D Cuscinetto con foro di lubrificazioneD1 Cuscinetto con foro di lubrificazione e
scanalatura
Disposizione in coppiaDB Disposizione a ODF Disposizione a XDT Disposizione in tandemD2 Cuscinetti accoppiatiG Disposizione universale: X, O, tandem+ x Distanziale (x = spessore distanziale)
Gioco / precaricoC2 Gioco radiale inferiore al normaleCN Gioco radiale standardC3 Gioco radiale superiore al normaleC4 Gioco radiale superiore a C3C5 Gioco radiale superiore a C4CM Gioco ristretto per cuscinetti
per motori elettriciNA Cuscinetti non intercambiabili/GL Precarico leggero/GN Precarico normale/GM Precarico medio/GH Precarico elevato
Classi di precisioneP6 Classe di precisione 6 (JIS)P6X Classe di precisione 6X (JIS) - cuscinetti
a rulli coniciP5 Classe di precisione 5 (JIS)P4 Classe di precisione 4 (JIS)P2 Classe di precisione 2 (JIS)2 Classe di precisione 2
cuscinetti a rulli conici in pollici3 Classe di precisione 3 - cuscinetti a rulli
conici in pollici0 Classe di precisione 0 - cuscinetti a rulli
conici in pollici00 Classe di precisione 00 - cuscinetti a rulli
conici in polliciUP Cuscinetti ultra-precisi
(classificazione NTN)VS1 Tolleranze speciali per cuscinetti
orientabili a rulliVS2 Tolleranze speciali per cuscinetti
orientabili a rulli
Lubrificazione/2AS Shell Alvania Nr. 2/3AS Shell Alvania Nr. 3/8A Shell Alvania EP Nr. 2
( grasso per carichi elevati )/5C Chevron SRI-2/3E ESSO-Beacon 325/5K MULTEMP SRL /LP03 Grasso solido
Prefijos y Sufijos
Símbolos Símbolos
20
Prefijos4T- Rodamiento cónico tipo 4-Top5S- Bolas o rodillos cerámicosE- Acero cementadoEC- Rodamientos con anillos de poliamidaET- Rodamiento cónico tipo ETF- Rodamiento de Acero InoxidableFL- Pestaña en el anillo exteriorHL- Rodamiento de rodillos con tratamiento
HL (Alta Lubricación)M- Rodamientos con recubrimientoN- Rodamientos de material especialTK- Rodamientos para muy alta velocidadTM- Rodamientos TSn- Tratamiento de estabilización de
temperatura hasta…TS2- Tratamiento de estabilización de
temperatura hasta 160ºCTS3- Tratamiento de estabilización de
temperatura hasta 200ºCTS4- Tratamiento de estabilización de
temperatura hasta 250ºC
Rodamintos de Bolas de Contacto AngularA1) Angulo de contacto 30ºB Angulo de contacto 40ºC Angulo de contacto 15º
Rodamientos de rodillos cónicosB1) Angulo de contacto de 10º hasta 17ºC Angulo de contacto de 17º hasta 24ºD Angulo de contacto de 24º hasta 32º
1) Nota: A y B no se muestran en la referencia
21
Diseño InternoA Geometria interna modificadaE Rodamiento de rodillos cilíndricos con
capacidad de carga aumentadaU Rodamiento de rodillos cónicos
intercambiables internacionalmenteUA Diseño especial de rodamientos a rótula
para aplicación vibranteR Rodamientos cónicos no intrcambiables
internacionalmenteST Rodamientos cónicos de bajo parHT Rodamientos de rodillos cilíndricos para
carga axial elevada
JaulaF1 Jaula mecanizada de aceroF3 Jaula mecanizada de acero especialG1 Jaula mecanizada de bronce o latón sin
remachesG2 Jaulas con pasadoresJ Jaula de chapa de aceroL1 Jaula mecanizada de bronce o latónT1 Jaula de resina fenólicaT2 Jaula de poliamidaV Sin jaula
ObturaciónLLB Retén sin contactoLLU Retén con contactoLLH Retén con contacto reducidoZZ Chapa de protecciónZZA Chapa de protección desmontable
Configuración de las pistasK Anillo interior cónico. Ratio 1:12K30 Anillo interior cónico. Ratio 1:30N Ranura en el anillo exteriorNR Ranura en el anillo exterior con circlipD Agujeros de lubricaciónD1 Ranura y agujeros de lubricación en la
pista exterior
DisposiciónDB Disposición espalda con espaldaDF Disposición cara a caraDT Disposición en TandemD2 Rodamientos pareadosG Disposición Universal+ x Espaciador (x = anchura estandar del
espaciador)
Juego Interno/PrecargaC2 Juego Interno inferior al standardCN Juego Interno standardC3 Juego Interno superior al standardC4 Juego Interno superior a C3C5 Juego Interno superior a C4CM Juego Interno para motores eléctricosNA Pistas no intercambiables/GL Precarga ligera/GN Precarga standard/GM Precarga media/GH Alta precarga
Clase de PrecisiónP6 Precisión JIS 6P6X Precisión para rodamientos de rodillos
cónicosP5 Precisión JIS 5P4 Precisión JIS 4P2 Precisión JIS 22 Precisión 2
Rodamientos cónicos en pulgadas3 Rodamientos cónicos en pulgadas.
Clase precisión 30 Rodamientos cónicos en pulgadas.
Clase precisión 000 Rodamientos cónicos en pulgadas.
Clase precisión 00UP Ultra precisión NTNVS1 Tolerancia especial para rodamientos
esféricosVS2 Tolerancia especial para rodamientos
esféricos
Lubrificación/2AS Grasa Shell Alvania 2/3AS Grasa Shell Alvania 3/8A Grasa Shell Alvania EP2/5C Grasa Chevron SRI-2/3E Grasa Esso Beacon 325/5K Grasa Multemp SRL/LP03 Grasa solide
Prefijos y Sufijos
Símbolos Símbolos
607607 Z607 ZZ607 LU607 LLU
608608 Z608 ZZ608 LU608 LLU
609609 Z609 ZZ609 LU609 LLU
623623 Z623 ZZ
624624 Z624 ZZ
625625 Z625 ZZ
626626 Z626 ZZ626 LU626 LLU
627627 Z627 ZZ627 LU627 LLU
629629 Z629 ZZ629 LU629 LLU
634634 ZZ
635635 Z635 ZZ
R2ZZR4ZZR6ZZ
R8ZZR10ZZR12ZZ
R16ZZR18ZZR20ZZ
160021600316004
160051600616007
160081600916010
160111601216013
160141601516016
160171601816019
160201602116022
160241602616028
160301603216034
160361603816040
1604416048
5,37 GD 106,356,18 GD 107,686,96 GD 10
5,32 GD 106,306,12 GD 307,146,92 GD 30
5,566,586,40 GD 107,977,22 GD 10
7,1710,818,00 GD 10
6,21 GD 107,626,91 GD 10
5,52 GD 106,356,18 GD 10
5,44 GD 106,276,09 GD 307,616,90 GD 30
5,38 GD 106,216,03 GD 106,806,80 GD 10
5,787,166,49 GD 107,337,33 GD 10
6,407,36
6,107,027,02
21,7023,6221,88
23,3228,2330,78
39,0352,8457,55
10,7610,5111,56
12,7915,0017,29
20,1025,9529,59
40,2245,8153,32
63,9671,1983,35
91,00104,28114,08
129,06156,18180,77
211,15280,08322,98
391,45450,73557,26
672,94787,69905,31
1.203,202.182,74
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
22
60006000Z6000ZZ6000LU6000LLU
60016001Z6001ZZ6001LU6001LLU
60026002Z6002ZZ6002ZZNR6002LU6002LLU6002LLUNR
60036003Z6003ZZ6003ZZNR6003LU6003LLU6003LLUNR
60046004Z6004ZZ6004ZZNR6004LU6004LLU6004LLUNR
60056005Z6005ZZ6005ZZNR6005LU6005LLU6005LLUNR
60066006Z6006ZZ6006ZZNR6006LU6006LLU6006LLUNR
60076007Z6007ZZ6007ZZNR6007LU6007LLU6007LLUNR
60086008Z6008ZZ6008ZZNR6008LU6008LLU6008LLUNR
60096009Z6009ZZ6009ZZNR6009LU6009LLU6009LLUNR
60106010Z6010ZZ6010ZZNR6010LU6010LLU6010LLUNR
60116011Z6011ZZ6011ZZNR6011LU6011LLU6011LLUNR
60126012Z6012ZZ6012ZZNR6012LU6012LLU6012LLUNR
60136013Z6013ZZ6013LU6013LLU
5,81 GD 106,896,687,807,57 GD 30
6,23 GD 107,417,20 GD 308,398,14 GD 30
6,84 GD 108,117,88 GD 30
10,539,208,92 GD 30
11,46
7,21 GD 108,568,31 GD 30
11,099,669,38 GD 30
12,05
8,00 GD 109,479,20 GD 30
12,3010,7210,41 GD 3013,93
9,18 GD 1010,8710,56 GD 3014,1312,3011,95 GD 3015,99
11,23 GD 1013,2812,91 GD 1017,2615,0114,58 GD 1019,50
13,91 GD 1016,4816,01 GD 1021,3918,6318,08 GD 1024,18
17,48 GD 1020,6920,10 GD 1026,8923,3922,72 GD 1030,40
22,70 GD 1026,8826,09 GD 1034,8932,5629,51 GD 1039,47
26,31 GD 1031,1630,26 GD 1040,4735,2534,21 GD 1045,77
33,60 GD 539,7938,65 GD 551,7148,2343,71 GD 558,45
38,53 GD 545,6544,35 GD 559,2851,5350,05 GD 566,91
47,57 D 556,3554,74 D 563,6961,85 D 5
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
23
60146014Z6014ZZ6014LU6014LLU
60156015Z6015ZZ6015LU6015LLU
60166016Z6016ZZ6016LLU
60176017Z6017ZZ6017LLU
60186018Z6018ZZ6018LLU
60196019Z6019ZZ6019LLU
60206020Z6020ZZ6020LLU
60216021ZZ6021LLU
60226022Z6022ZZ6022LLU
60246024Z6024ZZ6024LLU
60266026ZZ
60286028Z6028ZZ
6030
6032
6034
6036
6038
6040
6044
6048
59,26 D 570,2168,21 D 584,9977,03 D 5
67,89 D 280,3878,08 D 297,4588,31 D 2
82,60 D 297,9395,12 D 2
107,20 D 2
92,62 D 2117,35106,34 D 2120,39 D 2
110,04 D 2130,29126,56 D 2143,08 D 2
127,75 D 2157,47146,93 D 2166,02 D 2
140,46 D 2166,30161,53 D 2182,60 D 2
171,34 D 2202,81 D 2229,18 D 2
205,55 D 2243,45243,45 D 2275,28 D 2
245,35 D 2290,58290,58 D 2319,12 D 2
318,38 D 2393,37 D 2
366,61 D 2471,81471,81 D 2
450,91
782,48
940,98
1.056,66
1.192,63
1.410,29
1.933,06
2.310,00
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
24
62006200Z6200ZZ6200ZZNR6200LU6200LLU6200LLUNR
62016201Z6201ZZ6201ZZNR6201LU6201LLU6201LLUNR
62026202Z6202ZZ6202ZZNR6202LU6202LLU6202LLUNR
62036203Z6203ZZ6203ZZNR6203LU6203LLU6203LLUNR
62046204Z6204ZZ6204ZZNR6204LU6204LLU6204LLUNR
62056205Z6205ZZ6205ZZNR6205LU6205LLU6205LLUNR
62066206Z6206ZZ6206ZZNR6206LU6206LLU6206LLUNR
62076207Z6207ZZ6207ZZNR6207LU6207LLU6207LLUNR
62086208Z6208ZZ6208ZZNR6208LU6208LLU6208LLUNR
62096209Z6209ZZ6209ZZNR6209LU6209LLU6209LLUNR
62106210Z6210ZZ6210ZZNR6210LU6210LLU6210LLUNR
62116211Z6211ZZ6211LU6211LLU6211LLUNR
62126212Z6212ZZ6212ZZNR6212LU6212LLU
5,82 GD 106,916,70 GD 308,987,817,58 GD 30
10,16
6,09 GD 107,227,01 GD 309,378,137,90 GD 30
10,58
6,55 GD 107,777,54 GD 30
10,098,788,52 GD 30
11,41
7,38 GD 108,728,45 GD 30
11,329,899,59 GD 30
12,81
8,67 GD 1010,199,89 GD 30
13,2111,6111,28 GD 3015,07
10,08 GD 1011,9811,63 GD 3015,5613,5413,15 GD 3017,58
13,46 GD 1015,9315,48 GD 1020,6918,0117,48 GD 1023,38
17,73 GD 1020,9820,39 GD 1027,2623,7123,03 GD 1030,83
23,47 GD 1027,8127,00 GD 1036,1031,4230,52 GD 1040,84
28,70 GD 1033,9532,99 GD 1044,1338,3737,26 GD 1049,85
33,96 GD 1040,1839,02 GD 1052,1945,4344,12 GD 1059,01
40,10 GD 547,5446,16 GD 553,6652,11 GD 569,71
48,91 GD 557,8856,22 GD 575,2165,4863,59 GD 5
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
25
62136213Z6213ZZ6213LU6213LLU
62146214Z6214ZZ6214LU6214LLU
62156215Z6215ZZ6215LU6215LLU
62166216Z6216ZZ6216LU6216LLU
62176217Z6217ZZ6217LU6217LLU
62186218Z6218ZZ6218LLU
62196219Z6219ZZ6219LLU
62206220Z6220ZZ6220LLU
62216221ZZ
62226222Z6222ZZ
6224
6226
6228
6230
6232
6234
6236
6238
6240
6244
69,40 D 582,1479,78 D 599,7790,42 D 5
77,16 D 591,3991,39 D 5
110,59100,25 D 5
91,22 D 2115,86108,12 D 2130,87118,59 D 2
106,73 D 2126,57126,57 D 2142,85138,74 D 2
134,03 D 2154,30154,30 D 2174,18174,18 D 2
165,34 D 2203,99190,35 D 2214,71 D 2
199,60 D 2246,07229,59 D 2277,07 D 2
229,47 D 2263,78263,78 D 2298,14 D 2
291,16 D 2349,51 D 2
332,90 D 2431,48411,19 D 2
427,02
509,43
688,36
811,79
1.262,03
1.503,05
1.779,35
2.023,67
2.641,14
3.963,89
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
26
63006300Z6300ZZ6300LU6300LLU
63016301Z6301ZZ6301LU6301LLU
63026302Z6302ZZ6302LU6302LLU
63036303Z6303ZZ6303ZZNR6303LU6303LLU
63046304Z6304ZZ6304LU6304LLU6304LLUNR
63056305Z6305ZZ6305ZZNR6305LU6305LLU6305LLUNR
63066306Z6306ZZ6306ZZNR6306LU6306LLU6306LLUNR
63076307Z6307ZZ6307ZZNR6307LU6307LLU6307LLUNR
63086308Z6308ZZ6308ZZNR6308LU6308LLU
63096309Z6309ZZ6309ZZNR6309LU6309LLU6309LLUNR
63106310Z6310ZZ6310LU6310LLU
63116311Z6311ZZ6311LU6311LLU
63126312Z6312ZZ6312LU6312LLU
63136313Z6313ZZ6313LU6313LLU
63146314Z6314ZZ6314LU6314LLU
7,72 GD 109,808,88 GD 30
10,0410,04 GD 30
7,93 GD 109,379,10 GD 30
11,3810,31 GD 30
8,61 GD 1010,209,90 GD 30
11,5011,17 GD 30
9,72 GD 1011,5111,18 GD 3014,9613,9612,65 GD 30
11,28 GD 1013,3612,96 GD 3015,0614,64 GD 3019,59
14,10 GD 1016,7116,22 GD 3021,7018,8718,34 GD 3024,51
18,96 GD 1022,4321,83 GD 1029,1825,3624,62 GD 1032,95
25,47 GD 1030,1629,28 GD 1039,1434,1233,13 GD 1044,30
36,03 GD 1042,6441,41 GD 1055,4248,2546,87 GD 10
45,47 GD 1053,8352,28 GD 1069,9460,8459,09 GD 1079,02
59,20 GD 1070,0968,06 GD 1079,2176,93 GD 10
74,23 GD 587,7085,30 GD 5
106,2396,29 GD 5
94,05 GD 5107,03108,32 GD 5134,84122,20 GD 5
125,96 D 5149,24144,95 D 5180,45163,53 D 5
151,24 D 2179,24174,09 D 2242,63196,66 D 2
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
27
63156315Z6315ZZ6315LU6315LLU
63166316Z6316ZZ6316LLU
63176317Z6317ZZ6317LLU
63186318Z6318ZZ6318LLU
63196319Z6319ZZ6319LLU
63206320Z6320ZZ
6321
6322
6324
6326
6328
6330
60/2260/22ZZ60/22LLU
60/2860/28LLU
60/32
62/2262/22LLU
62/2862/28LLU
62/32
63/22
63/28
63/32
640364046405
640664076408
640964106411
641264136414
641564166417
6418
179,32 D 2212,51212,51 D 2233,17233,17 D 2
217,23 D 2275,48249,95 D 2290,69 D 2
255,65 D 2346,68302,59 D 2365,54 D 2
310,43 D 2420,52367,73 D 2415,53 D 2
383,47 D 2484,98484,98 D 2513,25 D 2
461,67 D 2584,14584,14 D 2
596,81 D 2
679,84 D 2
824,99
1.502,97
1.755,82
2.177,93
13,4719,4526,02
13,7020,59
17,19
13,1917,08
16,9521,08
29,24
28,07
28,47
39,49
34,6544,8453,87
67,7581,7999,32
121,41142,53170,05
204,49251,16356,86
527,87599,65760,66
961,92
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
28
68006800ZZ6800LLU
68016801ZZ6801LLU
68026802ZZ6802LLU
68036803ZZ6803LLU
68046804ZZ6804LLU
68056805ZZ6805LLU
68066806ZZ6806LLU
68076807ZZ6807LLU
68086808ZZ6808LLU
68096809ZZ6809LLU
68106810ZZ6810LLU
68116811LLU
68126812LLU
68136813LLU
68146814LLU
68156815LLU
68166816LLU
68176817LLU
68186818LLU
68206820LLU
68216821LLU
68226822LLU
6824
68266826LLU
68286828LLU
6830
6832
6834
6836
6838
6840
6844
6848
6852
14,64 D 1016,77 D 1016,77 D 10
14,32 D 1016,40 D 1016,40 D 10
14,32 D 1016,90 D 1016,90 D 10
15,47 D 1019,24 D 1019,24 D 10
17,39 D 1021,91 D 1021,91 D 10
20,14 D 1024,99 D 1024,99 D 10
30,47 D 1035,97 D 1035,97 D 10
35,95 D 1041,36 D 1041,36 D 10
38,39 D 545,20 D 545,20 D 5
46,01 D 553,65 D 553,65 D 5
52,34 D 561,02 D 561,02 D 5
61,54 D 574,27 D 5
72,16 D 585,29 D 5
80,95 D 596,79 D 5
87,40 D 5103,57 D 5
99,70 D 5118,22 D 5
109,63 D 5130,84 D 5
133,35 D 5160,64 D 5
151,05184,92
171,27209,66
183,89223,31
205,11243,01
240,48
288,46349,07
341,53415,78
585,01
649,69
737,38
819,44
865,92
958,85
1.134,66
1.369,06
1.522,65
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
29
69006900ZZ6900LLU
69016901ZZ6901LLU
69026902ZZ6902LLU
69036903ZZ6903LLU
69046904ZZ6904LLU
69056905ZZ6905LLU
69066906ZZ6906LLU
69076907ZZ6907LLU
69086908ZZ6908LLU
69096909LLU
69106910LLU
69116911LLU
69126912LLU
69136913LLU
69146914LLU
69156915LLU
6916
6917
6918
6919
6920
14,18 D 1016,11 D 1016,11 D 10
13,98 D 1016,07 D 1016,07 D 10
15,63 D 1017,77 D 1017,77 D 10
16,25 D 1018,20 D 1018,20 D 10
19,12 D 1021,75 D 1021,75 D 10
22,85 D 1028,28 D 1028,28 D 10
33,77 D 1036,35 D 1036,35 D 10
42,05 D 1049,62 D 1049,62 D 10
45,02 D 552,53 D 552,53 D 5
52,53 D 561,30 D 5
56,47 D 572,25 D 5
63,36 D 593,06 D 5
74,16 D 5101,29 D 5
79,90 D 5119,77
91,14 D 5123,03
112,66 D 5140,47
112,66
132,87
151,05
168,96
186,93
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
30
63204ZZ
63205ZZ
63206ZZ63206LLU
63208ZZ63208LLU
BL206ZZ
BL207ZZ
BL208ZZ
BL209
BL210
BL212Z
BL214BL214Z
BL215BL215ZZ
BL216BL216Z
BL217Z
BL306ZZ
BL307ZZ
BL308
BL309ZZ
BL310ZZ
BL311
BL312
29,92
33,70
43,1953,64
71,2076,89
61,95
64,33
71,76
83,03
77,84
127,56
152,13187,63
197,23239,72
221,22245,00
304,03
83,29
77,84
82,96
110,14
113,47
156,21
186,56
RillenkugellagerDeep groove ball bearingsRoulements rigides à billesCuscinetti radiali a sfereRodamientos rígidos de bolas
€ T Q € T Q
Lager mit LU(LLU)-Dichtung auch in LB(LLB) lieferbar.Bearings with LU(LLU)-seal also available with LB(LLB).Roulements LU(LLU) également livrable en LB(LLB).Cuscinetti con tenute LU(LLU)- anche disponibili con LB(LLB).Rodamientos con retén LU(LLU) también disponibles con LB(LLB).
31
12001201120212031204
12051205K12061206K
12071207K12081208K
12091209K12101210K
12111211K12121212K
12131213K1214
12151215K12161216K
12171217K12181218K
12191219K12201220K
122112221222K
1301130213031304
13051305K13061306K
13071307K13081308K
13091309K13101310K
13111311K13121312K
13131313K1314
13151315K13161316K
13171317K13181318K
13191319K13201320K
24,94 D 1023,42 D 1022,99 D 1022,73 D 1024,22 D 10
25,87 D 1027,54 D 1030,92 D 1032,90 D 10
37,95 D 535,66 D 544,38 D 544,38 D 5
48,30 D 546,92 D 555,42 D 555,42 D 5
67,84 D 565,88 D 580,52 D 280,52 D 2
97,12 D 294,34 D 2
108,23
122,64122,64144,99144,99
181,24181,24217,98217,98
259,67259,67308,34308,34
378,12426,02426,02
36,12 D 532,30 D 532,30 D 534,33 D 5
39,95 D 539,95 D 549,41 D 549,41 D 5
57,30 D 557,30 D 569,86 D 269,86 D 2
86,56 D 286,56 D 2
105,33 D 2105,33 D 2
125,54 D 2125,54 D 2155,93 D 2155,93 D 2
213,27 D 2193,90 D 2243,01
285,50285,50327,56327,56
428,22428,22453,62453,62
657,10657,10811,91819,31
PendelkugellagerSelf-aligning ball bearingsRoulements à rotule sur billesCuscinetti orientabili a sfereRodamientos autoalineables
€ T Q € T Q
Alle Lager mit Stahlblechkäfig lieferbar.All bearings also available with pressed steel cage.Livrable en cage tôle.Tutti i cuscinetti sono disponibili anche con gabbia in acciaio stampato.Todos los rodamientos están disponibles con jaula de chapa.
32
22002201220222032204
22052205K22062206K
22072207K22082208K
22092209K22102210K
22112211K22122212K
22132213K2214
22152215K22162216K
22172217K22182218K
22192219K22202220K
22222222K
2301230223032304
23052305K23062306K
23072307K23082308K
23092309K23102310K
23112311K23122312K
23132313K2314
23152315K23162316K
23172317K23182318K
27,41 D 530,71 D 529,41 D 531,33 D 532,66 D 5
37,03 D 537,03 D 539,98 D 539,98 D 5
47,96 D 547,96 D 554,72 D 554,72 D 5
64,05 D 264,05 D 271,86 D 271,86 D 2
86,20 D 286,20 D 2
104,82 D 2104,82 D 2
127,00 D 2127,00 D 2158,23
192,43192,43232,46232,46
284,78284,78343,29343,29
703,42703,42667,08667,08
836,42836,42
50,39 D 551,14 D 547,80 D 545,00 D 5
55,17 D 555,17 D 567,75 D 567,75 D 5
80,19 D 280,19 D 295,41 D 295,41 D 2
118,77 D 2118,77 D 2150,37 D 2150,37 D 2
185,86 D 2185,86 D 2229,61 D 2229,61 D 2
276,84 D 2276,84 D 2343,71
432,70432,70526,13526,13
840,24840,24
1.060,081.060,08
PendelkugellagerSelf-aligning ball bearingsRoulements à rotule sur billesCuscinetti orientabili a sfereRodamientos autoalineables
€ T Q € T Q
Alle Lager mit Stahlblechkäfig lieferbar.All bearings also available with pressed steel cage.Livrable en cage tôle.Tutti i cuscinetti sono disponibili anche con gabbia in acciaio stampato.Todos los rodamientos están disponibles con jaula de chapa.
33
7200 (B)7201 (B)7201BG
7202(B)7202BG7203 (B)7203BG
7204 (B)7204BG7205 (B)7205BG
7206 (B)7206BG7207 (B)7207BG
7208 (B)7208BG7209 (B)7209BG
7210 (B)7210BG7211 (B)7211BG
7212 (B)7212BG7213 (B)7213BG
7214 (B)7214BG7215 (B)7215BG
7216 (B)7216BG7217 (B)7217BG
7218 (B)7218BG7219 (B)7219BG
7220 (B)7220BG7221 (B)7221BG
7222 (B)7222BG
7224 (B)7226 (B)7228 (B)
7301 (B)7302 (B)7303 (B)
7304 (B)7304BG7305 (B)7305BG
7306 (B)7306BG7307 (B)7307BG
7308 (B)7308BG7309 (B)7309BG
7310 (B)7310BG7311 (B)7311BG
7312 (B)7312BG7313 (B)7313BG
7314 (B)7314BG7315 (B)7315BG
7316 (B)7316BG7317 (B)7317BG
7318 (B)7318BG7319 (B)7319BG
22,74 D 1022,1939,24 D 5
21,81 D 1039,12 D 523,1643,30 D 5
24,60 D 1046,78 D 526,76 D 1050,69 D 5
31,99 D 1056,49 D 539,19 D 1062,85 D 5
45,31 D 1071,99 D 551,76 D 1080,16 D 5
58,63 D 1087,48 D 573,49 D 5
103,79 D 5
87,87 D 5119,67 D 2106,33 D 5138,20
123,51157,64139,25172,65
169,07202,49204,52239,46
247,56287,05291,10330,60
337,17378,68390,83439,44
445,49494,08
787,72986,16
1.254,46
42,00 D 1028,28 D 1028,40 D 10
29,60 D 1054,98 D 535,16 D 1062,09 D 5
42,35 D 1068,56 D 551,56 D 1076,96 D 5
66,19 D 1092,66 D 581,22 D 10
107,31 D 5
99,68 D 10133,47 D 5126,57 D 5153,90 D 2
153,92 D 5193,60 D 2204,52231,10
247,06273,89310,85362,05
365,00418,03437,89495,48
508,27575,52598,38668,64
SchrägkugellagerAngular contact ball bearingsRoulements à billes à contact obliqueCuscinetti obliqui a sfereRodamientos de bolas con contacto angular
€ T Q € T Q
Alle Lager mit Stahlblechkäfig lieferbar.All bearings also available with pressed steel cage.Livrable en cage tôle.Tutti i cuscinetti sono disponibili anche con gabbia in acciaio stampato.Todos los rodamientos están disponibles con jaula de chapa.
34
7320 (B)7320BG7321 (B)7321BG
7322 (B)7322BG7324 (B)7326 (B)
7000CG/GNP47001CG/GNP47002CG/GNP47003CG/GNP4
7004CG/GNP47005CG/GNP47006CG/GNP47007CG/GNP4
7008CG/GNP47009CG/GNP47010CG/GNP47011CG/GNP4
7012CG/GNP47013CG/GNP4
7200CG/GNP47201CG/GNP47202CG/GNP47203CG/GNP4
7204CG/GNP47205CG/GNP47206CG/GNP47207CG/GNP4
7208CG/GNP47209CG/GNP47210CG/GNP47211CG/GNP4
7212CG/GNP47213CG/GNP4
320032013202
320332043205
320632073208
320932103211
321232133214
321532163217
321832193220
330233033304
330533063307
330833093310
331133123313
331433153316
331733183320
716,84784,63941,14
1.013,00
1.022,631.090,451.661,982.004,71
152,25159,47163,55168,42
169,05173,80180,53204,79
254,65278,89288,33338,18
371,86405,53
163,03164,36167,07191,33
194,22196,69216,91246,56
315,29346,26371,86412,28
468,86533,52
37,91 D 238,67 D 239,24 D 2
41,03 D 240,02 D 244,09 D 2
52,57 D 262,33 D 279,60 D 2
91,50 D 299,33 D 2
121,46
166,70191,87220,72
245,02283,70349,32
416,13523,47615,62
50,09 D 252,34 D 256,49 D 2
67,48 D 280,84 D 294,50 D 2
118,64 D 2148,41180,46
224,69274,88350,71
416,48538,16607,76
747,21886,92
1.966,56
SchrägkugellagerAngular contact ball bearingsRoulements à billes à contact obliqueCuscinetti obliqui a sfereRodamientos de bolas con contacto angular
€ T Q € T Q
Alle Lager mit Stahlblechkäfig lieferbar.All bearings also available with pressed steel cage.Livrable en cage tôle.Tutti i cuscinetti sono disponibili anche con gabbia in acciaio stampato.Todos los rodamientos están disponibles con jaula de chapa.
35
52005200 AZZ5200 ALLU
52015201 AZZ5201 ALLU
52025202 BZZ5202 BLLU
52035203 BZZ5203 BLLU
52045204 BZZ5204 BLLU
52055205 BZZ5205 BLLU
52065206 CZZ5206 CLLU
52075207 AZZ5207 ALLU
52085208 AZZ5208 ALLU
52095209 AZZ5209 ALLU
52105210 AZZ5210 ALLU
521152125213
521452155216
5217521852195220
53025302 AZZ5302 ALLU
53035303 CZZ5303 CLLU
53045304 BZZ5304 BLLU
53055305 CZZ5305 CLLU
53065306 AZZ5306 ALLU
53075307 AZZ5307 ALLU
53085308 ALLU
53095309 BLLU
53105310 ALLU
531153125313
531453155316
53175318
37,91 D 241,72 D 245,52 D 2
38,67 D 242,52 D 246,44 D 2
39,24 D 244,45 D 247,11 D 2
41,03 D 243,24 D 245,77 D 2
40,02 D 245,96 D 248,05 D 2
44,09 D 248,53 D 250,64 D 2
52,57 D 257,82 D 260,40 D 2
62,33 D 271,55 D 274,84 D 2
79,60 D 287,62 D 291,46 D 2
91,50 D 2100,65 D 2109,89 D 2
99,33 D 2114,02 D 2118,99 D 2
121,46166,70191,87
220,72245,02283,70
349,32416,13523,47615,62
50,09 D 255,10 D 260,01 D 2
52,34 D 257,61 D 262,78 D 2
56,49 D 262,13 D 267,78 D 2
67,48 D 274,27 D 277,51 D 2
80,84 D 288,95 D 296,96 D 2
94,50 D 2103,71 D 2113,50 D 2
118,64 D 2142,26
148,41170,86
180,46248,93
224,69274,88350,71
416,48538,16607,76
747,21886,92
SchrägkugellagerAngular contact ball bearingsRoulements à billes à contact obliqueCuscinetti obliqui a sfereRodamientos de bolas con contacto angular
€ T Q € T Q
Alle Lager mit Stahlblechkäfig lieferbar.All bearings also available with pressed steel cage.Livrable en cage tôle.Tutti i cuscinetti sono disponibili anche con gabbia in acciaio stampato.Todos los rodamientos están disponibles con jaula de chapa.
36
N203N204N205
N206N207N208
N209N210N211
N212N213N214
N215N216N217
N218N219N220
N222N224N226
N304N305N306
N307N308N309
N310N311N312
N313N314N315
N316N317N318
N319N320N322
N324
53,2854,6854,85
61,2272,0080,94
92,36100,10139,31
135,66161,61179,98
195,46230,85266,86
429,94354,88423,01
562,50680,98
1.126,19
71,5873,6775,53
87,47103,74126,23
163,22173,28205,41
238,65289,55339,40
383,67437,38503,27
630,03765,15
1.005,43
1.287,80
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
37
NJ203NJ204ENJ205E
NJ206ENJ207ENJ208E
NJ209ENJ210ENJ211E
NJ212ENJ213NJ214
NJ215NJ216NJ217
NJ218NJ219NJ220
NJ221NJ222NJ224
NJ226NJ228NJ230
NJ2203NJ2204ENJ2205E
NJ2206ENJ2207ENJ2208E
NJ2209ENJ2210ENJ2211
NJ2212NJ2213NJ2214
NJ2215NJ2216NJ2217
NJ2218NJ2219NJ2220
NJ2222NJ2224
39,60 D 542,01 D 245,00 D 5
51,93 D 560,54 D 570,08 D 5
77,25 D 582,60 D 596,61 D 5
114,41 D 5133,15 D 5145,30
164,56186,28215,17
252,11310,34379,18
389,30530,10609,85
766,13966,88
1.211,03
51,8050,09 D 554,78 D 5
63,99 D 572,20 D 586,96 D 5
95,18 D 5102,75 D 5122,04 D 5
143,27 D 5163,50179,21
197,95232,88272,36
328,56430,80467,75
646,97995,08
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
38
NJ2305ENJ2306ENJ2307E
NJ2308ENJ2309NJ2310
NJ2311NJ2312NJ2313
NJ2314NJ2315NJ2316
NJ2317NJ2318NJ2319
NJ2320
NJ304ENJ305ENJ306E
NJ307ENJ308ENJ309E
NJ310ENJ311ENJ312E
NJ313NJ314ENJ315
NJ316NJ317NJ318
NJ319NJ320NJ321
NJ322
NJ405NJ406NJ407
NJ408NJ409NJ410
NJ411NJ412NJ413
NN3005KC1NAP5NN3006KC1NAP5NN3007KC1NAP5
NN3008KC1NAP5NN3009KC1NAP5NN3010KC1NAP5
NN3011KC1NAP5NN3012KC1NAP5NN3013KC1NAP5
NN3014KC1NAP5NN3015KC1NAP5NN3016KC1NAP5
NN3017KC1NAP5NN3018KC1NAP5
NU1010NU1011NU1012
NU1013NU1014NU1015
NU1016NU1017NU1018
NU1019NU1020NU1022
NU1024NU1026NU1028
NU1030
70,08 D 585,65 D 5
100,34 D 5
122,51 D 5148,83 D 2181,73 D 2
215,17 D 2260,22 D 2315,92
374,62489,93528,54
614,56772,63958,18
1.144,84
47,62 D 553,79 D 567,43 D 5
74,60 D 589,73 D 5
105,33 D 5
124,53 D 5148,83 D 2174,65 D 2
210,59 D 2249,10289,07
337,17395,87494,27
642,88705,71878,99
1.066,72
109,85147,91189,20
228,01238,78288,56
669,48402,59464,96
525,46489,52489,52
462,58488,03489,52
520,95552,40573,34
621,26624,25661,67
564,37860,79
149,69137,01194,31
211,76236,79255,99
186,19276,59313,61
360,51366,52454,83
515,12623,02736,20
841,98
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
39
NU203NU204ENU205E
NU206ENU207ENU208E
NU209ENU210ENU211E
NU212ENU213NU214
NU215NU216NU217
NU218NU219NU220
NU221NU222NU224
NU226NU228NU230
NU304ENU305ENU306E
NU307ENU308ENU309E
NU310ENU311ENU312E
NU313NU314NU315
NU316NU317NU318
NU319NU320NU322
NU324NU326
NU406NU407NU408
NU409NU410NU411
NU412NU413
36,54 D 537,48 D 540,10 D 5
46,99 D 555,17 D 562,15 D 5
69,05 D 574,74 D 589,91 D 5
103,73 D 5122,94 D 5132,65
145,80167,58195,43
232,38271,84317,93
351,85402,47514,35
635,82840,35
1.047,94
43,28 D 549,62 D 555,98 D 5
65,26 D 577,57 D 596,34 D 5
112,56 D 5131,63 D 2156,45 D 2
182,68 D 2220,35 D 2252,78 D 2
300,95 D 2342,93 D 2400,22 D 2
440,98 D 2551,35 D 2819,08
1.053,801.281,66
129,78171,18205,80
237,02255,81314,39
359,10426,51
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
40
NU2204ENU2205ENU2206E
NU2207ENU2208ENU2209
NU2210ENU2211NU2212
NU2213NU2214NU2215
NU2216NU2217NU2218
NU2219NU2220NU2222
NU2304ENU2305ENU2306E
NU2307ENU2308ENU2309
NU2310NU2311NU2312
NU2313NU2314NU2315
NU2316NU2317NU2318
NU2319NU2320NU2322
NUP203NUP204ENUP205E
NUP206ENUP207ENUP208E
NUP209ENUP210ENUP211E
NUP212ENUP213NUP214
NUP215NUP216NUP217
NUP218NUP219NUP220
NUP222
NUP304ENUP305ENUP306E
NUP307ENUP308ENUP309E
NUP310ENUP311ENUP312E
NUP313NUP314ENUP315
NUP316NUP317
46,44 D 548,15 D 557,89 D 5
66,12 D 577,16 D 586,15 D 5
93,94 D 5110,87 D 5127,35 D 5
150,37168,08181,73
215,17254,14297,68
352,36423,20576,10
78,33 D 565,59 D 580,13 D 5
93,52 D 5112,59 D 5138,03 D 5
166,58 D 5206,54 D 5248,55 D 2
305,12354,41437,93
486,23574,93791,94
859,281.118,951.527,16
56,0948,52 D 553,56 D 5
60,41 D 567,87 D 576,79 D 5
87,27 D 595,89 D 5
117,29 D 5
135,95 D 5161,38177,46
199,78228,31266,18
289,03350,92390,22
538,34
58,11 D 564,24 D 574,60 D 5
86,45 D 5102,44 D 5123,00 D 5
145,81 D 5167,61201,86
235,06285,40353,14
421,54445,21
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
41
NUP2205NUP2206NUP2207E
NUP2208ENUP2209NUP2210E
NUP2211NUP2213NUP2214
NUP2215NUP2216NUP2217
NUP2305ENUP2306ENUP2307E
NUP2308ENUP2309NUP2310
NUP2311NUP2312NUP2313
NUP2314NUP2315
61,25 D 572,30 D 582,52 D 5
101,20 D 5105,34 D 5114,12 D 5
133,86 D 5185,76210,16
229,35267,74343,69
106,32 D 5125,74 D 5114,12 D 5
140,64 D 5170,21208,07
261,50317,04586,37
469,36691,11
ZylinderrollenlagerCylindrical roller bearingsRoulements à rouleaux cylindriquesCuscinetti a rulli cilindriciRodamientos de rodillos cilíndricos
€ T Q € T Q
Auch lieferbar mit Stahl- und Messingmassiv-Käfig.Also available with steel and massive brass retainer.Livrable en cage massive acier ou laiton.Anche disponibile con gabbia in acciaio e in ottone.También disponible con jaula de Acero o Latón.
42
2130821308K2130921309K
2131021310K2131121311K
2131221312K2131321313K
2131421314K2131521315K
2131621316K2131721317K
2131821318K2131921319K
2132021320K2132221322K
2220822208K2220922209K
2221022210K22211B22211BK
22212B22212BK22213B22213BK
22214B22214BK22215B22215BK
22216B22216BK22217B22217BK
22218B22218BK22219B22219BK
22220B22220BK22222B22222BK
22224B22224BK22226B22226BK
22228B22228BK22230B22230BK
22232B22232BK22234B22234BK
22236B22236BK22238B22238BK
22240B22240BK22244B22244BK
22248B22248BK22252B22252BK
22256B22256BK22260B22260BK
135,24 D 5139,25 D 5148,01 D 5152,38 D 5
170,15 D 2175,18 D 2199,14 D 2205,01 D 2
224,69 D 2231,34 D 2263,56 D 2271,36 D 2
304,36 D 2313,35 D 2339,29 D 2349,32 D 2
382,05 D 2393,36 D 2433,36 D 2433,36 D 2
493,60 D 2493,60 D 2591,30 D 2591,30 D 2
679,39 D 2679,39 D 2910,23910,23
106,36 D 5106,36 D 5112,09 D 5112,09 D 5
118,75 D 5118,75 D 5131,63 D 5131,63 D 5
148,84 D 5148,84 D 5175,05 D 2175,05 D 2
200,33 D 2200,33 D 2219,86 D 2219,86 D 2
249,46 D 2249,46 D 2287,13 D 2287,13 D 2
333,88 D 2333,88 D 2397,78 D 2399,12 D 2
447,39 D 2447,39 D 2550,08 D 2550,08 D 2
727,85 D 2727,85 D 2861,40 D 2861,40 D 2
1.086,67 D 21.086,67 D 21.358,10 D 21.358,10 D 2
1.690,51 D 21.690,51 D 22.151,39 D 22.151,39 D 2
2.402,52 D 22.402,52 D 22.906,89 D 22.906,89 D 2
3.485,55 D 23.614,64 D 24.566,99 D 25.039,45 D 2
6.242,976.242,979.470,089.470,08
11.552,5111.552,5114.315,0914.315,09
PendelrollenlagerSpherical roller bearingsRoulements à rotule sur rouleauxCuscinetti orientabili a rulliRodamientos de rodillos esféricos
€ T Q € T Q
Auch lieferbar in verstärkter Ausführung mit Kunststoff-Käfig, "E"-Version.Also available in strengthened design with plastic cage, "E"-version.Livrable egalement en version renforcée "E" cage plastique.Anche disponibile nella versione "rinforzata" "E" in gabbia plastica.También disponible en versión reforzada con jaula de plástico "E".
43
2230822308K2230922309K
2231022310K22311B22311BK
22312B22312BK22313B22313BK
22314B22314BK22315B22315BK
22316B22316BK22317B22317BK
22318B22318BK22319B22319BK
22320B22320BK22322B22322BK
22324B22324BK22326B22326BK
22328B22328BK22330B22330BK
22332B22332BK22334B22334BK
22336B22336BK22338B22338BK
22340B22340BK22344B22344BK
22348B22348BK22352B22352BK
22356B22356BK
22311BVS122312BVS122313BVS1
22314UA22315UA22316UA
22317UA22318UA22319UA
22320UA22322UA22324UA
22326UA22328UA22330UA
22332UA22334UA22336UA
22338UA
148,84 D 5148,84 D 5170,28 D 5170,28 D 5
199,87 D 2199,87 D 2234,68 D 2234,68 D 2
272,36 D 2272,36 D 2316,71 D 2316,71 D 2
363,45 D 2363,45 D 2424,03 D 2424,03 D 2
480,77 D 2480,77 D 2543,73 D 2559,82 D 2
610,50 D 2628,55 D 2731,68 D 2753,30 D 2
878,21 D 2904,14 D 2
1.208,89 D 21.208,89 D 2
1.513,66 D 21.513,66 D 21.852,84 D 21.852,84 D 2
2.311,48 D 22.311,48 D 22.956,06 D 22.956,06 D 2
3.340,67 D 23.554,60 D 23.907,10 D 24.157,30 D 2
4.770,56 D 24.770,56 D 25.814,81 D 25.814,81 D 2
6.761,77 D 26.761,77 D 28.739,47 D 28.739,47 D 2
11.545,9011.545,9014.985,5414.985,54
20.259,0820.259,08
293,63 D 2339,32 D 2396,26 D 2
452,75 D 4506,77 D 4574,59 D 4
664,55 D 4750,01 D 4910,35 D 2
1.058,04 D 21.414,44 D 21.770,84 D 2
2.167,72 D 22.794,92 D 23.518,39 D 2
4.371,83 D 25.303,12 D 26.085,34 D 2
6.721,65
PendelrollenlagerSpherical roller bearingsRoulements à rotule sur rouleauxCuscinetti orientabili a rulliRodamientos de rodillos esféricos
€ T Q € T Q
Auch lieferbar in verstärkter Ausführung mit Kunststoff-Käfig, "E"-Version.Also available in strengthened design with plastic cage, "E"-version.Livrable egalement en version renforcée "E" cage plastique.Anche disponibile nella versione "rinforzata" "E" in gabbia plastica.También disponible en versión reforzada con jaula de plástico "E".
44
23022B23022BK23024B23024BK
23026B23026BK23028B23028BK
23030B23030BK23032B23032BK
23034B23034BK23036B23036BK
23038B23038BK23040B23040BK
23044B23044BK23048B23048BK
23052B23052BK23056B23056BK
23060B23060BK23064B23064BK
23068B23068BK23072B23072BK
23076B23076BK
23120B23120BK23122B23122BK
23124B23124BK23126B23126BK
23128B23128BK23130B23130BK
23132B23132BK23134B23134BK
23136B23136BK23138B23138BK
23140B23140BK23144B23144BK
23148B23148BK23152B23152BK
23156B23156BK23160B23160BK
23164B23164BK23168B23168BK
23172B23172BK
479,90 D 2479,90 D 2558,57 D 2558,57 D 2
686,48 D 2686,48 D 2798,84 D 2798,84 D 2
902,78 D 2960,58 D 2
1.076,84 D 21.145,80 D 2
1.280,79 D 21.323,70 D 21.499,50 D 21.499,50 D 2
1.700,97 D 21.757,94 D 21.916,63 D 21.980,82 D 2
2.416,25 D 22.570,98 D 22.870,60 D 23.054,42 D 2
3.760,60 D 24.001,41 D 24.339,82 D 24.617,74 D 2
5.667,875.667,876.508,246.508,24
8.336,798.097,469.479,86
10.160,24
10.181,3210.482,24
517,37 D 2517,37 D 2593,01 D 2610,53 D 2
771,50 D 2771,50 D 2881,85 D 2911,40 D 2
1.030,71 D 21.065,23 D 21.316,24 D 21.360,32 D 2
1.544,43 D 21.606,21 D 21.818,61 D 21.759,69 D 2
2.139,87 D 22.070,52 D 22.635,86 D 22.550,44 D 2
2.839,13 D 22.839,13 D 23.926,08 D 23.689,78 D 2
4.971,42 D 24.971,42 D 26.150,846.150,84
7.624,007.624,009.890,949.890,94
12.369,5012.369,5016.477,9816.477,98
17.695,1517.695,15
PendelrollenlagerSpherical roller bearingsRoulements à rotule sur rouleauxCuscinetti orientabili a rulliRodamientos de rodillos esféricos
€ T Q € T Q
Auch lieferbar in verstärkter Ausführung mit Kunststoff-Käfig, "E"-Version.Also available in strengthened design with plastic cage, "E"-version.Livrable egalement en version renforcée "E" cage plastique.Anche disponibile nella versione "rinforzata" "E" in gabbia plastica.También disponible en versión reforzada con jaula de plástico "E".
45
23218B23218BK23220B23220BK
23222B23222BK23224B23224BK
23226B23226BK23228B23228BK
23230B23230BK23232B23232BK
23234B23234BK23236B23236BK
23238B23238BK23240B23240BK
23244B23244BK23248B23248BK
23252B23252BK23256B23256BK
23260B23260BK
239362393823940
239442394823952
239562396023964
239722397623984
24024B24024BK3024026B24026BK30
24028B24028BK3024030B24030BK30
24032B24032BK3024034B24034BK30
24036B24036BK3024038B24038BK30
24040B24040BK3024044B24044BK30
24048B24048BK3024052B24052BK30
24056B24056BK3024060B
516,37 D 2516,37 D 2644,97 D 2644,97 D 2
799,51 D 2799,51 D 2988,17 D 2988,17 D 2
1.177,52 D 21.177,52 D 21.467,08 D 21.467,08 D 2
1.902,33 D 21.902,33 D 22.257,84 D 22.257,84 D 2
2.821,08 D 22.821,08 D 23.133,92 D 23.133,92 D 2
3.471,45 D 23.693,77 D 24.400,09 D 24.135,26 D 2
5.978,05 D 25.978,05 D 27.361,857.579,44
10.315,3510.315,3511.987,4811.987,48
15.044,4615.044,46
1.670,871.908,621.863,73
2.160,762.219,453.291,46
3.293,854.478,448.131,62
7.325,518.892,19
11.153,56
785,69 D 2812,00 D 2931,27 D 2931,27 D 2
1.073,62 D 21.113,38 D 21.222,21 D 21.270,58 D 2
1.400,08 D 21.451,93 D 21.712,93 D 21.776,37 D 2
2.018,48 D 22.093,25 D 22.229,86 D 22.312,46 D 2
2.683,99 D 22.783,39 D 23.514,84 D 23.645,02 D 2
4.043,82 D 24.462,13 D 25.883,68 D 25.883,68 D 2
6.326,32 D 26.980,77 D 29.730,62
PendelrollenlagerSpherical roller bearingsRoulements à rotule sur rouleauxCuscinetti orientabili a rulliRodamientos de rodillos esféricos
€ T Q € T Q
Auch lieferbar in verstärkter Ausführung mit Kunststoff-Käfig, "E"-Version.Also available in strengthened design with plastic cage, "E"-version.Livrable egalement en version renforcée "E" cage plastique.Anche disponibile nella versione "rinforzata" "E" in gabbia plastica.También disponible en versión reforzada con jaula de plástico "E".
46
24122B24122BK3024124B24124BK30
24126B24126BK3024128B24128BK30
24130B24130BK3024132B24132BK30
24134B24134BK3024136B24136BK30
24138B24138BK3024140B24140BK30
24144B24144BK3024148B24148BK30
24152B24152BK3024156B24156BK30
24160B24160BK3024164B24164BK30
891,00 D 2920,84 D 2
1.041,45 D 21.149,18 D 2
1.306,95 D 21.355,34 D 21.557,04 D 21.614,70 D 2
1.865,87 D 21.934,98 D 22.344,99 D 22.431,86 D 2
2.534,89 D 22.534,89 D 23.100,45 D 23.215,30 D 2
3.793,18 D 23.933,67 D 24.300,48 D 24.745,36 D 2
5.940,39 D 26.160,39 D 27.041,26 D 27.769,67 D 2
9.681,3510.376,1610.869,9611.650,10
14.351,9213.939,8822.371,7522.371,75
PendelrollenlagerSpherical roller bearingsRoulements à rotule sur rouleauxCuscinetti orientabili a rulliRodamientos de rodillos esféricos
€ T Q € T Q
Auch lieferbar in verstärkter Ausführung mit Kunststoff-Käfig, "E"-Version.Also available in strengthened design with plastic cage, "E"-version.Livrable egalement en version renforcée "E" cage plastique.Anche disponibile nella versione "rinforzata" "E" in gabbia plastica.También disponible en versión reforzada con jaula de plástico "E".
47
302033020430205
302063020730208
302093021030211
302123021330214
302153021630217
302183021930220
302213022230224
302263022830230
30232
303023030330304
303053030630307
303083030930310
303113031230313
303143031530316
303173031830319
303203032130322
30324
303..D (=313..)
30305D30306D30307D
30308D30309D30310D
30311D30312D30313D
30314D30315D30316D
30317D30318D
19,78 GD 1021,23 GD 1023,52 GD 10
25,86 GD 1032,23 GD 1038,72 GD 10
43,12 D 554,77 D 560,77 D 5
72,49 D 589,38 D 598,84 D 5
104,26 D 5123,91 D 2149,83 D 2
182,74 D 2214,38 D 2263,56 D 2
323,48379,68492,68
657,09902,13
1.175,50
1.468,11
24,92 GD 1024,55 GD 1024,43 GD 10
29,67 GD 1036,65 GD 1043,64 GD 5
53,69 GD 568,31 D 581,57 D 5
107,19 D 5127,85 D 5158,45
193,39239,95285,01
360,46414,13488,03
651,021.264,421.065,04
1.527,84
45,25 D 553,25 D 560,75 D 5
73,00 D 595,96 D 5
107,82 D 5
145,00160,48223,50
240,46322,28375,60
525,75638,09
KegelrollenlagerTapered roller bearingsRoulements à rouleaux coniquesCuscinetti a rulli coniciRodamientos de rodillos cónicos
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
48
32004X32005X32006X
32007X32008X32009X
32010X32011X32012X
32013X32014X32015X
32016X32017X32018X
32019X32020X32021X
32022X32024X32026X
32028X32030X32032X
322053220632207
322083220932210
322113221232213
322143221532216
322173221832219
322203222132222
322243222632228
32230
24,47 GD 1024,26 GD 1027,82 GD 10
29,90 GD 1034,38 GD 539,41 GD 5
46,96 GD 555,53 GD 567,57 D 5
79,16 D 588,91 D 596,98 D 5
116,04 D 5130,29 D 5149,01 D 2
164,56 D 2164,70 D 2216,66 D 2
237,49 D 2283,23426,33
559,56728,70873,28
46,85 GD 1032,76 GD 1038,23 GD 5
42,90 GD 548,08 GD 553,88 GD 5
73,16 D 585,66 D 5
107,19 D 5
112,56 D 5120,65 D 5136,91 D 5
158,34 D 2207,71 D 2261,59 D 2
310,75386,81507,46
883,091.141,761.421,04
1.850,79
KegelrollenlagerTapered roller bearingsRoulements à rouleaux coniquesCuscinetti a rulli coniciRodamientos de rodillos cónicos
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
49
323033230432305
323063230732308
323093231032311
323123231332314
323153231632317
323183231932320
323213232232324
323..C (=323..B)
32307C32308C32309C
32310C32311C32312C
32314C32315C32316C
32317C
330103301133012
330133301433015
330163301733018
330193302033021
331083310933110
331113311233113
331143311533116
331173311833122
332053320633207
332083320933210
332113321233213
332143321533216
3321733220
34,4938,15 D 541,26 D 5
51,98 D 560,18 D 573,06 D 5
87,78 D 5107,31 D 5136,69 D 5
166,56213,13251,11
314,88377,65510,29
636,26922,38
1.173,22
1.398,251.653,392.183,94
99,68102,28108,23
176,59207,04242,89
367,91461,10551,89
777,73
71,97 D 588,88 D 5
103,62 D 5
92,53 D 5106,33 D 5116,44 D 5
137,19 D 5152,38186,11
191,87199,97237,94
62,7865,5272,58
85,27102,24113,91
144,86148,83160,30
209,45230,33439,10
38,2946,0154,88
65,6274,4583,91
101,76124,04141,74
158,45179,71230,33
277,81711,30
KegelrollenlagerTapered roller bearingsRoulements à rouleaux coniquesCuscinetti a rulli coniciRodamientos de rodillos cónicos
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
50
332332/32CSTPX1332A335/332A
335336339342
342/332342S344344/332
344A/332344A352354A
354X355A355X/352355X/354X
355X358358X/354A358X/354X
358X359A359S/3525359S/354X
359S362362A363
365/362365367368/362
368/362A368/363368368A/362
368A/362A368A/363368A369S/362A
369S382382A382S
383A385/382A385385A
386A/382A386A387/382387/382A
387387A/382387A/382A387A/383A
387A/382S387A387AS/382A387AS
387S388A389A/383A389A
390390A390/394A394
394A394AB394AS395/394
395/394A395395A/394A395A
395S/394A395S/394AS395S396/394A
396397399399A/394A
19,5259,0931,62
117,87
86,2458,5854,7552,58
72,1147,6652,3471,86
73,5554,0235,4521,32
19,4260,8491,1475,10
55,7061,20
267,10265,19
245,7879,4868,1761,45
42,0434,2419,5230,89
85,5251,2748,8676,54
61,8073,1842,2870,66
55,9467,3136,4266,24
46,7135,6925,8634,24
31,7577,9752,1050,33
71,1445,2777,7567,91
42,0474,6164,8070,66
73,1838,9370,7844,91
50,6647,4385,6453,89
57,5045,5282,5351,27
25,04 D 568,7531,98
108,28
82,0557,0279,65 D 554,61
79,7686,7254,75 D 5
115,83
90,7856,77
348,8076,17
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
51
399A399AS/394A399AS/394AS399AS
413X414/418414418/414
418420432432A
436/432436438/432438
443/432449/432A453453A
453X455456462/453X
462462A/453462A/453X462A
467469/453X469472
472A472X480482/472
482/472A482/472X482483
484/472484492A493
49368493D495/492A495/493
495/493D495495A/492A495A/493
495A495AX496497/492A
497/493497497A/492A497A
498/492A498/493498522
526/522526527/522527
528/522528529529X/520X
529/522529X/522529X532A
532X535/532A535536/532X
536537/532X537539/532X
539552552A553X
51,1477,6184,5552,58
362,08103,6133,89
103,61
69,7163,6044,0851,27
121,8277,75
105,7561,69
113,41141,4253,7938,56
37,9867,5669,22
103,61
65,64146,49130,6792,71
73,0698,9360,9861,45
48,3973,66
105,28179,42
166,37191,64117,98114,87
184,57123,1350,6650,42
134,75185,41150,92150,67
285,66100,26164,44164,21
113,7882,2865,64
125,17
124,9274,50
137,1586,47
138,69138,4688,0338,33
138,59100,26126,6188,28
107,4569,1266,12
198,81
104,45120,8682,5360,50
39,04 D 5247,23186,73143,02
103,97110,55 D 571,51 D 5
124,80
85,75107,3258,2152,58
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
52
555S558559/552A559
560/552560/552A560563
565/563565566/563566
567/563567567A567X/563
567X568570572/580
572572A572D572X
5735575/572575/572X575
575S/572575S576578/572
578578X580/572580/572X
580581/572581582/572
582592592A593/592
593/592A593593A593X
594/592594/592A594594A/592
594A/592A594A595/593X595
596/592A596598/592A598
598A/592A598A598X/592A598X
612615/612615619/612
619623/612623632
633635/632635639/632
639641/632641643/632
643644/632644/633644
645/632645/633645652
89,23103,97186,73128,52
190,34141,2283,0050,42
177,98127,56145,2994,87
131,2780,85
100,26483,19
432,7496,18
130,31141,34
49,70230,93265,0565,17
64,33160,25175,72110,55
768,96719,26111,64200,74
151,02203,52141,34156,79
91,64148,4198,70
160,50
110,80114,3963,72
218,35
167,69103,97119,7891,51 D 5
220,63169,97106,25 D 5220,63
169,97106,25243,63152,11
193,69129,97191,88128,16
175,23111,50
1.076,31803,70
69,95219,91149,97190,34
120,38165,6495,7071,03
102,41296,51225,49200,50
129,48216,44145,41188,53
117,50200,14231,52129,11
200,98232,37129,9788,16
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
53
653655/653655659
661/652661663/653663
664/652664665/653665
665A/653665A672681/672
681681A683/672683
685687/672687740/742
740742743744
745A/742745A74874850
748S/742748S749/742749
749A/742749A750752
755/752755757758/752
758759/752759772
780/772780782/772786
792795832835/832
835841/832841842/832
842850/832850854
855861/854861864/854
864892898/892898
932936/932936938/932
93812201280/12201280
13281380/132813801729
1729X1755/172917751779/1729
64,92 D 5243,27178,36191,40
282,19194,04194,04 D 5129,11 D 5
295,16206,99216,19151,27
189,60124,6981,21 D 5
342,80
261,59160,98252,85 D 5171,64 D 5
169,36237,75156,55256,20
170,5685,64 D 2
159,06 D 2179,67
298,24212,61285,66 D 2249,02
291,41205,77238,35 D 2152,72 D 2
240,75155,11246,6295,34
302,67207,33211,16272,61
177,27266,39171,05182,67
402,21219,54396,11253,57
208,30357,88158,11625,35
467,24492,04333,94498,16
340,05491,56333,47187,21
377,65514,19326,99561,51
374,30303,64913,89610,26
301,12 D 5864,54563,43757,70 D 5
456,58 D 523,4766,9543,47
19,6551,8632,2314,02
23,3656,0564,1948,03
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
54
17791780/172917801922
19311975/192219751985
1986/19221986/193119861988/1922
1988/193119881997XA2047
A2126242024732473X
2474247525202523
2523S2558/2523S25582578
2580/25232580/2523S25802581
2585/2523S258526202631
2687/263126872688/26312688
2689/26202689/263126892690
272027292735X2780/2720
2780/2735X27802788/27202788/2729
2788/2735X27882788A2789/2720
2789/27292789/2735X27892790/2729
27902793/272027932794
2796/2720279628202878/2820
287829242984/29242984
312031883188S/31203188S
3193/3120319333203379
3381/3320338133823383
33843386/332033863420
34,0354,9840,9620,00
24,3169,2249,2239,77
56,6660,9836,6462,77
67,0842,7643,7245,64 D 10
21,56 D 1030,89
137,15642,60
92,8369,3633,7723,36
195,24249,0253,7949,00
70,91242,7847,5654,98
243,3948,1435,9423,36
72,3549,0076,5453,19
82,6470,0846,7150,06
14,8625,5124,0860,72
69,9545,8749,0059,64
58,2134,1439,2851,75
62,4160,9836,8962,41
36,8949,1034,2437,72
49,8334,9825,2783,60
58,3330,1986,1255,94
28,3958,94
465,93437,54
88,9960,6029,9458,21
87,4457,5080,5155,33
140,6287,5557,6126,95
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
55
3476/342034763478/34203478
3479/34203490/342034903520
352535763577/35253577
3578/352535783579/35253579
35803585/352535853586
3586/3525372037303767/3720
376737753776/37203776
3778/372037783779/37203779
3780/372037803781/37203781
3782/3720378237953820
3872/3820387238753876
3877/3820387738803920
392539793980/39203980
3982/392039823984/39203984/3925
39843994/39203994A4049
A4050/A4138A4050A4059/A4138A4059
A413843354370/43204388
4580/45355395/533555355578
55835584/55355760A6067
A6075/A6157A6075A6157A6162
62206280/622063206379/6320
63796386/632063866389
90,9263,9685,2858,33
83,6085,4058,4533,89
26,10106,6091,0364,92
82,1656,0599,0672,95
73,3193,9167,7968,27
94,3823,12 D 536,6478,94
55,8056,7683,9760,84
76,0652,9484,2061,08
79,53 D 556,41 D 587,5564,43
71,9948,8663,6024,08
85,5261,4562,4155,33
82,0557,9852,8231,14 D 5
42,5253,6699,0667,91
91,7460,6090,55 D 5
101,93
59,41 D 591,6460,5047,43
53,1938,4547,43 D 1032,70 D 10
14,72 D 1049,70
240,51123,61
183,15191,8894,38
185,90
173,56215,71117,8739,64
50,9132,9417,9638,33
100,36304,2394,74 D 5
318,50 D 5
223,74 D 5285,18 D 5190,44 D 5220,50
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
56
6420/646164206460/64206460
64616461A6525X6535
653665756576/65356576
6580/65356580/653665806581X/6525X
6581X/65356581X91219185
9185/91219285/922093209321
9378/93209378/932193789380/9320
9380/932193800242002473
02473/0242002474/024200247402475/02420
024750282002872/0282002875
0287702878/0282003062/0316203062
0506205079/0518505079/05185S05079
0518505185S07087/0719607087/07204
07087/07210X0708707087X/0719607087X/07204
07087X/07210X07087X0709307097/07204
07097/072050709707098/0720407098/07205
070980710007100/0720407100S/07196
07100S/0720407100S/0720507100S/07210X07100S
07100SA/0719607100SA/07210X07100SA07196
072040720507210X09062/09195
0906209067/0919509067/0919609067
09074/0919409074/0919509074/0919609074
310,9491,14
401,49310,33
219,79182,30393,11 D 2131,16 D 2
157,75311,31438,74307,59
315,13341,72183,97 D 2
1.016,54 D 2
754,59 D 2623,44 D 2148,28348,90
497,20475,63290,22177,27
872,82759,86582,60669,44
556,48379,2122,3948,99
71,3873,7851,3961,93
39,5212,3341,4335,94
35,0950,5470,9146,83
35,2343,9647,9131,62
12,3316,2836,8942,17
35,6924,1938,6943,96
37,4926,0028,1442,52
70,1824,5642,64 D 1070,31
24,66 D 1027,3145,2738,56
43,8371,5137,3725,86
39,2838,0826,5812,69
17,96 D 1045,6411,5047,43
36,1734,8537,7223,60
36,6435,8138,6924,56
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
57
0907809081/091950908109194
091950919611162/1130011162/11315
11162113001152011590/11520
11590LM11710LM11749/LM11710LM11749
LM11910/LM11949LM11910LM11949/LM11910LM11949
121751230312580/12520M12610
M12648M12648/M12610M12649/M12610M12649
LM12710LM12711LM12749/LM12710LM12749/LM12711
LM12749136201362113685/13620
13685/136211368513686/1362013686
13687/13621136871383613889/13830
13889/13836138891411614117A/14276
14117A14118/142831411814123A
14124/142761412414125A/1427414125A/14276
14125A14130/142761413014131
14131/1427614136A/1427614136A14137A/14276
14137A/1428314137A14138A/1427414138A/14276
14138A142741427614282
1428315100/152451510015100S/15245
15100S/15250X15100S1510115102/15245
1510215103S15106/1524515106/15250
15106/15250X1510615112/1524515112/15250
25,5137,1325,8612,10
11,2514,13
117,87125,77
90,0827,7914,72 D 1047,43 D 10
32,70 D 105,63 D 10
17,00 D 1011,38 D 10
18,20 D 106,10 D 10
18,20 D 1012,10 D 10
49,7026,1043,728,98 D 10
32,3341,3329,46 D 1020,47 D 10
7,67 D 107,19 D 10
26,5826,10 D 10
18,91 D 1019,5217,3749,70
47,5630,1958,0938,56
44,8027,4324,4480,36
82,8958,4529,4646,36
30,7969,2242,4040,84
44,6729,1039,8942,04
26,4743,1227,5528,75
44,3360,8445,2749,70 D 10
60,9834,14 D 1039,6441,81
26,2313,4215,58 D 1066,96
26,8437,4925,04
244,94
250,44232,4830,7940,37
27,9148,1439,5244,67
45,0327,0739,0444,20
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
58
15112/15250X1511215113/1524515113
1511615117/1524415117/1524515117
15118/1525015118/15250X1511815119
1512015123/1524515123/15250X15123
15125/1524515125/15250X1512515126
15244152451525015250X
155201552315578/1552015578/15523
1557815579X15580/1552015580
15590/1552015590/155231559016137/16282
1613716143/1628416150/1628216150/16283
16150/16284161501628216283
1628417118/172441711817244
1752017580/175201758017831
17887/17831178871852018590/18520
18590186201868518690/18620
186901872018790/1872018790
19150/1926819150/1928319150/19283X19150
1926819283X21075/2121221075
21212227202278023100/23256
23100232562472024721
24780/2472024780/247212478025520
25521255222552325526
44,5626,5837,0124,56
26,3545,8734,1421,67
40,4740,8422,8826,58
25,7543,00 D 1048,5130,55 D 10
37,0142,5224,5623,12
24,1912,46 D 1017,6117,96
15,69 D 1017,8645,0347,19
29,3466,6543,8328,14
44,80 D 1046,9529,10 D 1071,27
47,9180,3671,14
103,97
78,3347,8023,3656,18
30,5555,94 D 1036,29 D 1019,65 D 10
17,2552,3435,0927,19
100,2673,0618,81 D 1063,84 D 10
45,03 D 1017,9640,0051,61
33,6617,0049,5932,58
60,2463,9692,1240,61
19,6551,5058,0933,66
24,4434,3863,2460,37
38,6921,6724,3133,89
69,4779,0545,1620,61 D 10
28,8620,8422,8830,89
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
59
2557225577/2552125577/2552225577/25523
255772557825580/2552025580/25521
25580/255222558025581/2552025581
25584/255202558425584A25590/25520
25590/2552125590/2552225590/2552325590
258202582125877/2582025877/25821
2587725878/258202587825880/25820
25880/25821258802682226823
268242683026878/2682226878
26880/268242688026881/2682426881
26882/2682026882/2682226882/2682326882
2688426886/2682426886/2683026886
2762027684/276202768427687/27620
2768727690/276202769028137/28317
2813728150/283002815628158/28300
28300283172852028521
28580/2852028580/285212858028584/28520
28584/28521285842862228622B
28680/286222868028682/2862228682
28919289202892128980
28985/2892028985/289212898528990
28995/2892028995/289212899529520
49,9565,8857,8559,89
37,0140,2459,28 D 1067,56
59,5338,69 D 1058,9438,33
54,5033,8951,6153,31
61,5653,5455,5832,70
19,6518,2052,1050,66
32,4668,2748,6263,47
62,0443,8321,6731,85
31,3830,6663,1241,43
87,8056,4171,6240,24
65,7658,6968,8737,01
49,9576,1775,4644,80
48,86155,11106,25154,99
106,11125,7776,89
277,17
244,46102,6159,0582,89
22,3432,7041,0827,66
97,5084,0856,4198,22
84,8057,1428,03
107,45
89,7261,6976,8948,86
45,8735,8139,6498,22
99,66103,5063,8483,00
121,82125,6585,9948,27
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
60
295212952229585/2952029585
29586/295202958629590/2952029590/29521
29590/29522295902962029675/29620
2967529685/296202968529688/29620
29688LM29710LM29711LM29748/LM29710
LM29748LM29749/LM29710LM29749/LM29711LM29749
3152031593/315203159331597/31520
3159733262/334623326233275/33462
33275/334723327533281/3346233281/33472
3328133287/334623328733462
33472338213382233885/33821
33885/338223388533889/3382233889
33890/3382133891/3382133895/3382133895/33822
3389534300/344783430034301/34478
34306/3447834306/345003430634478
34492A345003662036690
36690/366203669137425/3762537425
37431/37625374313762539250/39412
39250394123952039573/39520
39580/395203958039581/3952039581
39585/395203958539590/3952039590
41125/412864112541126/4128641286
39,5256,89
134,1585,89
145,4197,13
168,05159,30
176,67119,7830,1995,47
65,28101,8071,62
135,70
105,5210,06 D 1037,3251,86
41,8130,55 D 1057,7920,47 D 10
19,0572,8353,7951,86
32,83140,0393,78
118,94
118,4772,70
138,46137,98
92,22113,5567,3146,22
45,7539,7733,53
103,61
97,3863,8491,2757,73
99,6697,7498,3392,12
58,58109,5972,22
109,71
105,41119,4268,0337,37
52,5851,39
102,89195,95
298,84420,06204,58134,99
215,83146,2569,59
110,80
71,8638,9332,94
172,12
119,8986,95
102,2869,36
120,2687,3297,0264,08
83,9757,6185,6426,35
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
61
42346/42584423464235042350/42584
42350/4258742362/425844236242368/42584
4237542381/425844238142584
42587426204268742688/42620
426884269042690/4262043125/43312
431254313143138X/4331243312
4414344150/443484415044162/44348
44348L44610L44643L44643/L44610
L44643L/L44610L44649/L44610L4464945220
4522145280/452204528045282/45220
4528245284/452204528445285
45285/4522045285A/45220BPX14529045291/45220
45291L45410L45449/L45410L45449
461624672046780/4672046780
46790/46720467904742047487/47420
4748747490/474204749047620
47679/47620476794768147686/47620
4768647687/476204768747820
47890/478204789047896/4782047896
4812048190/481204819048220
48286/482204828648290/4822048290
4832048385/4832048393/4832048393
218,35158,82109,11168,64
185,65214,52154,99192,73
137,98177,98118,4759,53
76,5459,28
108,40146,13
86,84117,13176,4284,20
59,0558,69
581,5125,16
57,6193,1861,9391,14
31,267,06 D 10
17,37 D 1024,44 D 10
32,2422,75 D 1015,69 D 1030,66
37,13105,5274,86
106,72
76,0684,9354,2668,87
99,53452,0157,14
110,68
80,015,14 D 10
17,72 D 1012,58 D 10
101,09193,92628,83434,91
480,66286,7585,75
214,16
128,40209,86124,0855,33
141,3485,99
128,40152,01
96,66172,97117,6162,17
161,4699,31
190,56128,40
91,14241,71150,56152,01
378,85226,86437,07285,08
189,49406,28449,77260,27
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
62
LM48510LM48511ALM48548/LM48510LM48548
LM48548ALM48548A/LM48510LM48548C/LM48510LM48549
LM48549X/LM48510LM48549X4862048684
48685/486204868549162/4936849162
52375/5261852387/526185238752393
52400/526185240052401/5261852401
52618531625317653177
53178/53375531785337555175C/55437
55175C55176/554375517655187/55437
55187/554435518755187C/5544355187C
55200C/5543755200C5543755443
56418/5665056425/566505642556426/56650
56426566505666264432/64708
6443264450/647006445064700
65200/6550065237/655006523765320
6538565390/653206539065500
66200/66462662006622566462
6652066584/6652066584LM67010
LM67048/LM67010LM67048L/LM67010LM67048LM67049A/LM67010
LM67049A673206732267388/67322
6738867390/673226739067391/67322
673916772067786/6772067786
9,47 D 1025,1629,83 D 1020,36 D 10
45,6455,1037,13
101,45
91,9282,46
159,41375,98
485,45326,03470,61335,86
266,14242,78167,21188,16
220,99145,41239,91164,34
75,5790,9261,8072,58
131,0391,0340,00
108,03
68,38226,38186,73436,47
454,30396,82134,6477,14
116,3076,6639,6457,50
266,75228,67146,84346,40
264,5881,80
118,94562,59
333,69309,62191,88117,74
234,40193,33119,3095,94
289,02271,89175,9674,02
160,25113,6890,0846,60
56,89 D 5217,28 D 5160,39 D 5
7,42 D 10
23,12 D 1033,5515,69 D 1028,75
21,32393,22151,02415,63
264,58505,46354,42474,91
323,89216,30737,94521,63
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
63
6778767790/677206779067820
678856792067985L68110
L68111JL68145/JL68111ZL68149/L68110L68149/L68111
L6814968450/687126845068462/68712
684626870968712JL69310
JL69349/JL69310JL69349JL69349A71437
71450/71750714507175072200C/72487
72200CPX172200C72212C/7248772212C
72218C/7248772218C72225C72487
72487PX1LM72810LM72849/LM72810LM72849
74500745257455074550/74845
7485077375/77676X7737577675
77676X78214/785517821478214C/78551
78215C/7853778215C/7855178215C78225/78551
782257823878238/7853778250/78551
78250LM78310ALM78349/LM78310ALM78349
7853778551HM81610HM81649/HM81610
HM81649M84210M84249/M84210M84249
M84510M84548/M84510M84548M84549/M84510
M86610M86643/M86610M86643M86647/M86610
M86647M86648AM86649/M86610M86649
87750M88010M88040/M88010M88040
531,09736,15519,82377,18
679,14522,34689,3111,14 D 10
8,0332,7028,86 D 1025,75
17,72 D 10337,29199,42324,71
186,86169,60137,8610,67 D 10
30,42 D 1019,76 D 1026,23
377,50
389,98237,16152,83157,02
109,59109,59185,54138,11
170,32122,88136,1947,43
47,4320,96 D 1089,47 D 1068,51 D 10
424,60417,77367,00591,97
243,861.024,20
234,28128,64
789,93392,27300,89395,86
310,22298,13206,73314,89
223,49118,10374,83271,41
180,0214,72 D 1040,61 D 1025,86 D 10
70,0891,3931,75
131,99
100,2622,6581,4558,80
11,25 D 1034,85 D 1023,60 D 1077,75
11,98 D 1055,5843,6141,91
29,9495,7036,17 D 1024,19 D 10
1.249,8712,33 D 1050,6638,33
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
64
M88043/M88010M88043M88046/M88010M88046
M88048/M88010M88048HM88510JHM88540/JHM88513
HM88542/HM88510HM88542HM88547/HM88510HM88547
HM88610HM88611ASHM88648/HM88610HM88648
HM88649/HM88610HM88649HM89210HM89249
HM89410HM89411HM89443/HM89410HM89443
HM89446/HM89410HM89446HM89448HM89448/HM89410
HM89449/HM89410HM89449/HM89411HM8944990381/90744
9312593750/931259378793787/J93129A
938009382594700/9411394700
9547595500/959259550095525/95925
9552595528/959259552895925
98350/9878898400/987889840099100
99600/9910099600LM102910LM102949/LM102910
LM102949JLM104910LM104911LM104912
JLM104948/JLM104910JLM104948LM104949/JLM104910LM104949/LM104911
LM104949/LM104912LM104949LM124410LM124449/LM124410
LM124449M201011M201047HM204010
HM204049/HM204010HM204049JM205110JM205149/JM205110
JM205149JM207010JM207049/JM207010JM207049
JH211710JH211749/JH211710JH211749HM212010
HM212011HM212046HM212047/HM212011HM212047
39,1726,8445,6433,29
36,64 D 1024,31 D 1018,68
126,84
56,1837,4963,4744,80
14,86 D 1041,5755,8040,96
43,36 D 1028,50 D 1021,6542,04
18,56 D 1032,5865,8847,31
54,6136,0559,1777,73
56,17 D 1070,1937,61 D 10
781,55
548,471.652,791.476,854.230,75
1.018,10955,82
1.818,211.039,06
637,81859,27547,97864,18
552,88977,26665,96311,31
806,21758,67487,38386,40 D 2
972,70 D 10586,30 D 210,53 D 1032,94 D 10
22,39 D 1017,96 D 1016,8916,52
54,14 D 1036,17 D 1051,7450,66
50,3133,77
245,30680,93
435,6326,2332,4635,33
101,8066,4726,84 D 1088,03 D 10
61,20 D 1030,42 D 1097,26 D 1066,83 D 10
73,18 D 10206,73 D 10133,55 D 1048,86 D 10
34,2487,5397,3863,12
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
65
HM212049/HM212010HM212049/HM212011HM212049H212710
H212749/H212710H212749HM215210HM215249/HM215210
HM215249JH217210JH217249/JH217210JH217249
HM218210HM218238HM218238/HM218210HM218248/HM218210
HM218248HM220110HM220149/HM220110HM220149
HH221410HH221434/HH221410HH221449/HH221410HH221449
HH224310HH224334/HH224310HH224335/HH224310HH224335
HH224346HH224349/HH224310L225810L225849
HH228310HH228340/HH228310HH228340HH228349/HH228310
HH228349M231610M231649/M231610M231649
M236810M236848/M236810M236848M236849/M236810
M246910LM300811LM300849/LM300811LM300849
JH307710JH307749JHM318410JHM318448/JHM318410
JHM318448L319210L319249L327210
L327249/L327210L327249H414210H414242/H414210
H414242H414245/H414210H414245H414249/H414210
H414249JH415610JH415647/JH415610JH415647
L432310L432349/L432310L432349L435010
L435049LM501310LM501311LM501314
LM501349/LM501310LM501349/LM501311LM501349/LM501314LM501349
LM503310LM503349/LM503310LM503349LM503349A/LM503310
LM503349AHH506310HH506348JLM506810
110,31 D 1095,7061,45 D 1064,68
237,27172,6045,39
156,07
110,68 D 5116,90 D 5347,84230,93
53,89 D 10216,51270,40173,08 D 10
119,17 D 1066,95
211,40144,44
188,05 D 5641,88662,12 D 5474,07 D 5
282,31 D 51.472,011.077,62 D 5
795,32 D 5
694,101.923,11
106,36236,08
735,43 D 22.577,59 D 21.842,17 D 22.578,78
1.843,36239,66690,39450,72
351,781.219,57
867,781.134,14
876,7711,38 D 1032,70 D 1021,32 D 10
60,98141,3496,06
286,75
190,69108,28230,81255,00
748,71493,7268,99 D 5
307,94
238,95320,64251,65229,37 D 5
160,39 D 5105,89 D 5317,52 D 5211,64 D 5
368,44863,70495,28430,60
722,8512,33 D 1025,8614,61
36,05 D 1049,5938,3323,71 D 10
11,02 D 1038,45 D 1027,43 D 1036,29
25,2755,33
121,0829,83
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
66
JLM506849/JLM506810JLM506849L507949/L507910JLM508710
JLM508748/JLM508710JLM508748JM511910JM511946/JM511910
JM511946JM515610JM515649/JM515610JM515649
HM515716HM515745/HM515716HM515745JHM516810
JHM516849/JHM516810JHM516849HM518410HM518445/HM518410
HM518445LM522510LM522549/LM522510LM522549
JHM522610JHM522649/JHM522610JHM522649LL529710
LL529749M533349S/M533310JHM534110JHM534149/JHM534110
JHM534149LM603011LM603012LM603014
LM603049/LM603011LM603049/LM603012LM603049/LM603014LM603049
L610510L610549/L610510L610549JM612910
JM612949/JM612910JM612949L624549/L624510JLM704610
JLM704649JLM710910JLM710949JLM710949/JLM710910
JLM714110JLM714149/JLM714110JLM714149JM714210
JM714249/JM714210JM714249H715310H715311
H715334/H715311H715334H715336H715341A/H715311
H715341AH715343/H715311H715343H715345/H715311
H715345H715347/H715311H715347H715348/H715310
H715348/H715311H715348JM716610JM716648/JM716610
JM716648JM716649/JM716610JM716649JM718110
JM718149/JM718110JM718149JM718149A/JM718110JM718149A
JM719113JM719149/JM719113JM719149JHM720210
83,9754,14
182,4334,14 D 10
92,22 D 1058,09 D 1042,88 D 10
123,26 D 10
80,36 D 1059,28 D 10
188,29 D 10129,01 D 10
149,12334,89185,7783,49
244,58161,1168,27 D 10
219,19 D 10
150,92 D 1093,31
302,20208,90
147,08447,00299,93266,86
593,381.322,14
225,77612,30
386,5214,37 D 1012,2325,27
40,72 D 1038,5651,6126,35 D 10
47,31165,89118,5850,19
181,34131,16512,5016,65
37,3734,2479,46
113,71
33,42109,1175,7057,02 D 5
175,00 D 5117,98 D 597,5067,56
236,20168,64214,39441,38
373,82225,29157,75207,69
140,13334,17266,62342,32
312,38244,8345,03 D 10
148,41
103,36125,17 D 1080,14 D 1068,51 D 5
205,77 D 5137,26 D 5230,81 D 5162,30 D 5
70,31 D 5197,87 D 5127,56 D 599,66
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
67
JM720210JHM720249/JHM720210JHM720249JM720249
JL724348/JL724314JM734410JM734449/JM734410JM734449
JM736110JM736149/JM736110JM736149JM738210
JM738249/JM738210JM738249LM739710LM739749
HM801310HM801346/HM801310HM801346HM801346X/HM801310
HM801346XHM801349/HM801310HM801349M802011
M802048/M802011M802048HM803110HM803145/HM803110
HM803146/HM803110HM803146HM803149/HM803110HM803149/HM803111
HM803149M804010M804049HM804810
HM804840/HM804810HM804840HM804842/HM804810HM804842
HM804843/HM804810HM804846/HM804810HM804846HM804848/HM804810
HM804848HM804849/HM804810HM804849LM806610
LM806649/LM806610LM806649HM807010HM807011
JHM807012HM807035HM807040/HM807010HM807040
HM807044/HM807010HM807044JHM807045/JHM807012JHM807045
HM807046/HM807010HM807046HM807048/HM807010HM807048
HM807049/HM807010HM807049JLM813010JLM813049/JLM813010
JLM813049HM813810HM813839/HM813810HM813839
HM813840/HM813810HM813840HM813841HM813842/HM813810
HM813842HM813843/HM813810HM813843HM813844/HM813810
HM813844HM813846HM813849HM813849/HM813810
L814749/L814710LM814810LM814849/LM814810LM814849
82,53302,19202,54182,30
1.545,59360,41
1.035,95675,54
302,33873,88571,57323,28
958,69635,41451,20644,99
23,60118,5894,9874,75
51,14104,3280,7320,84
63,2442,4027,07 D 585,23
78,70 D 551,61 D 584,45
102,87
57,3729,2344,6732,83
104,0971,27
121,4588,64
101,9391,9959,1798,57
65,7695,3462,5216,89
49,8332,9439,0457,02
49,36152,59127,8088,75
201,47162,41145,8896,53
132,2393,18
132,7093,66
137,8698,8235,23
128,88
93,6658,69
242,91184,21
218,83160,15124,92181,21
122,53268,78210,09161,94
103,25230,99157,78216,47
215,9442,17
119,4277,26
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
68
JL819310JL819349/JL819310JL819349JM822010
JM822049/JM822010JM822049JHM840410JHM840449/JHM840410
JHM840449HM903210HM903245/HM903210HM903245
HM903248/HM903210HM903248HM903249/HM903210HM903249
M903310M903345HM907614HM907635
HM907639/HM907614HM907639HM907643/HM907614HM907643
HM911210HM911242/HM911210HM911242HM911244
HM911245/HM911210HM911245H913810H913840/H913810
H913842/H913810H913842H913843H913849/H913810
H913849H916642/H916610HM926710HM926740/HM926710
HM926740HM926747/HM926710
44,68131,6386,94
102,41 D 5
287,57 D 5185,16 D 5809,69
2.042,19
1.232,4947,80
153,92106,11
255,29207,51104,6956,89
49,2298,1080,01
141,34
330,22250,21175,0094,98
58,09261,11203,02194,63
222,54164,4468,87
461,49
332,27263,39302,67346,51
277,641.102,17
496,241.516,72
1.020,491.443,06
Kegelrollenlager, ZollTapered roller bearings, inchRoulements à rouleaux coniques, cotes poucesCuscinetti a rulli conici, polliciRodamientos de rodillos cónicos en pulgadas
€ T Q € T Q
Gängige Typen aus Einsatzstahl. Vorsetzzeichen "4T".Common types made of carburizing steel. Prefix "4T".Acier de cémentation en execution standard. Prefixes "4T".Versione con acciaio da cementazione. Prefisso "4T".Tipos standard fabricados con Acero Cementado. Prefijo "4T".
69
511005110151102
511035110451105
511065110751108
511095111051111
511125111351114
511155111651117
511185112051122
511245112651128
511305113251134
511365113851140
511445114851152
5115651160
512005120151202
512035120451205
512065120751208
512095121051211
512125121351214
512155121651217
512185122051222
512245122651228
512305123251234
512365123851240
512445124851252
16,03 D 516,10 D 515,90 D 5
16,10 D 516,13 D 517,84 D 5
19,21 D 520,46 D 524,71 D 5
28,16 D 530,64 D 538,00 D 2
42,23 D 245,72 D 249,94 D 2
56,67 D 264,19 D 271,25 D 2
86,12 D 2133,99 D 2148,69 D 2
174,78 D 2214,23 D 2261,67 D 2
417,50549,66637,37
603,12703,63831,58
1.020,061.283,921.553,47
1.995,542.595,63
19,58 D 520,01 D 519,51 D 2
20,49 D 521,45 D 523,89 D 5
26,97 D 533,28 D 537,36 D 5
40,94 D 545,64 D 562,78 D 2
68,64 D 278,64 D 285,46 D 2
94,54 D 2106,03 D 2136,94
163,06216,89270,16
335,26423,78741,35
829,26961,80
1.096,57
1.168,531.413,731.564,00
1.801,343.108,583.784,40
Axial-RillenkugellagerThrust ball bearingsButées à billesCuscinetti assialiRodamientos axiales de bolas
€ T Q € T Q
70
513055130651307
513085130951310
513115131251313
513145131551316
513175131851320
513225132451326
513285133051332
514055140651407
514085140951410
514115141251413
514145141551416
562005/GNP5562006/GNP5562007/GNP5
562008/GNP5562009/GNP5562010/GNP5
562011/GNP5562012/GNP5562013/GNP5
562014/GNP5562015/GNP5562016/GNP5
562017/GNP5562018/GNP5562019/GNP5
562020/GNP5562022/GNP5562024/GNP5
742016/GNP4742017/GNP4742018/GNP4
742020/GNP4742022/GNP4742024/GNP4
32,99 D 537,63 D 545,64 D 5
55,81 D 565,55 D 587,24 D 5
111,15 D 2133,35 D 2182,20 D 2
214,73261,02287,83
344,98386,65466,60
872,701.065,191.510,77
1.782,872.338,532.823,52
69,7570,7695,50
107,12145,07171,07
254,74474,45611,21
744,82949,03
1.127,02
757,11973,11
1.159,89
1.081,821.100,651.056,88
1.142,231.272,311.232,01
1.355,771.851,151.415,10
1.530,451.435,611.721,54
1.632,152.489,713.112,15
1.770,572.257,142.800,64
3.061,753.132,943.204,13
Axial-RillenkugellagerThrust ball bearingsButées à billesCuscinetti assialiRodamientos axiales de bolas
€ T Q € T Q
71
K4X7X7T2K5X8X10T2K6X9X8T2K6X9X10T2
K6X10X13T2K7X10X8T2K7X10X10T2K8X11X10T2
K8X11X13K9X12X13K10X13X10K10X13X13
K10X14X10K10X14X13K11X14X10K12X15X10S
K12X15X13K12X16X8K12X17X13K14X18X10
K14X18X13K14X18X15SK14X18X17K14X20X12
K15X18X14K15X19X10K15X19X13K15X19X13S
K15X19X17K15X20X13K16X20X17SK15X21X15
K15X21X21K16X20X10K16X20X13K16X22X12
K16X22X20K17X21X10SK17X21X13SK17X21X17
K17X22X20K18X22X10K18X22X13K18X22X17
K18X24X12K18X24X13K18X24X20K20X24X10S
K20X24X13SK20X24X17SK18X25X22K20X26X12
K20X26X13KMJ20X26X17SKMJ20X26X20SK20X28X25
K22X26X10K22X26X13K22X29X16KMJ22X29X16
K22X30X15K24X28X13K24X28X13SK24X28X17
K25X29X10K25X29X13K25X29X17SK25X30X13
K25X30X17SK25X30X20SK25X31X17K25X31X21
K25X32X16K25X35X29.8X2K26X30X13K26X30X17
K28X33X13K28X33X17SK28X33X27K28X35X16
K28X35X18K3X6X7T2K30X35X13K30X35X17
KJ30X35X17SK30X35X20SK30X35X27SK30X37X16
2,53 R 202,88 R 202,79 R 203,06 R 20
6,00 R 202,79 R 203,27 R 203,27 R 20
3,26 R 204,62 R 203,04 R 203,26 R 20
3,62 R 203,62 R 205,94 R 203,38 R 20
3,87 R 203,64 R 204,92 R 203,62 R 20
3,87 R 204,03 R 204,41 R 206,22 R 20
4,46 R 203,87 R 204,17 R 204,17 R 20
4,82 R 206,27 R 204,82 R 206,73 R 20
7,64 R 203,87 R 204,17 R 206,61 R 20
7,65 R 204,41 R 204,41 R 205,01 R 20
5,28 R 204,49 R 204,88 R 205,05 R 20
7,02 R 207,57 R 208,81 R 204,41 R 20
4,82 R 205,28 R 208,15 R 207,35 R 20
7,35 R 207,85 R 208,08 R 20
10,09 R 20
4,82 R 205,02 R 208,59 R 208,08 R 20
9,71 R 205,47 R 205,62 R 206,66 R 20
5,02 R 106,71 R 105,32 R 10
10,21 R 10
5,32 R 107,63 R 108,43 R 109,03 R 10
9,00 R 1016,16 R 105,43 R 106,75 R 10
5,80 R 106,47 R 10
10,22 R 109,19 R 10
9,24 R 102,56 R 105,80 R 106,47 R 10
6,47 R 109,41 R 108,08 R 109,47 R 10
NadellagerNeedle roller bearingsRoulements à aiguillesGabbie a rulliniRodamientos de agujas
€ T Q € T Q
72
K30X37X18K32X36X15SK32X37X13K32X37X17S
K32X37X27KJ32X37X27SKJ32X38X20SK32X39X16
KJ35X40X27SK35X42X16K35X42X18K35X42X20
K35X42X30K37X42X27K38X43X17K40X45X17
K40X45X27K40X47X18K40X48X20K42X47X17
K42X50X20K45X50X17K45X50X27K45X52X18
K45X53X20K50X55X20K50X55X30K50X57X18
K50X58X20K50X58X25K55X60X20K55X60X30
K55X63X20K55X63X25K55X63X32K60X65X20
K60X65X30K60X68X20K60X68X25K65X70X20
K65X70X30K70X76X30K73X79X20K75X81X30
K85X92X30K90X98X27K100X107X21K105X112X21
K105X113X30K110X117X24
HK0306T2HK0408T2HK0509T2HK0609T2
HK0709HK0810CHK0910HK0912
HK1010HK1012HMK1012LHMK1014LL
HK1015HK1210HK1212HK1214L
HMK1215HK1216LLHK1312HK1412
HK1414LHK1416LLHK1512HK1514L
HK1516HK1516LLHK1522ZWDHK1612
HK1614LHK1616HK1616LLHMK1620
HK1622ZWDHK1712HMK1720CHK1812
9,47 R 105,61 R 106,19 R 106,84 R 10
9,20 R 108,68 R 109,84 R 109,75 R 10
9,16 R 1010,28 R 109,96 R 10
12,14 R 10
10,88 R 1014,70 R 107,87 R 107,59 R 10
10,43 R 1012,10 R 1012,58 R 108,49 R 10
13,41 R 109,00 R 10
12,10 R 1013,40 R 10
15,06 R 1010,76 R 513,18 R 514,47 R 5
16,96 R 519,61 R 516,27 R 516,42 R 5
19,29 R 526,61 R 524,99 R 515,77 R 5
19,43 R 524,21 R 524,59 R 519,18 R 5
24,53 R 527,64 R 524,74 R 534,01 R 5
78,80 R 564,70 R 560,01 R 574,40 R 5
159,43 R 583,85 R 2
3,35 R 203,35 R 203,20 R 203,20 R 20
3,20 R 203,35 R 203,35 R 203,36 R 20
3,36 R 203,55 R 206,13 R 207,95 R 20
3,75 R 203,55 R 203,75 R 205,09 R 20
4,60 R 205,67 R 203,81 R 203,94 R 20
5,41 R 206,01 R 204,00 R 205,44 R 20
4,19 R 206,32 R 205,19 R 204,08 R 20
5,57 R 204,37 R 206,25 R 206,81 R 20
5,68 R 204,19 R 207,26 R 204,32 R 20
NadellagerNeedle roller bearingsRoulements à aiguillesGabbie a rulliniRodamientos de agujas
€ T Q € T Q
73
HK1814LHK1816HK1816DHK1816LL
HK2012CHMK2015HK2016HK2016LL
HK2018LHMK2020HK2020CHK2020LL
HMK2030HK2030ZWDHK2212HK2216C
HK2216LLHK2218LHK2220CHK2220LL
HMK2225HMK2230HK2512HK2516
HK2516LLHK2518LHK2520HMK2520
HK2520LLHK2526HK2538ZWDHK2816C
HK2820HK2820LLHK3012HK3016C
HK3016LLHK3018LHK3020HK3020LL
HK3026HK3038ZWDHK3512HK3516
HK3516LLHK3518LHK3520HK3520LL
HK4012HK4016HK4016LLHK4018L
HK4020HK4020LLHK4516HK4518L
HK4520HK4520LLDHK5020HK5024LL
HK5024LLDHK5025HKS55X63X20
BK0408T2BK0509BK0609T2BK0709
BK0810CBK0910BK0912BK1010
BK1012BK1015BK1210BK1212
BK1312 BK1412BK1512BK1516
BK1522ZWDBK1612BK1616BK1712
5,93 R 204,68 R 205,02 R 206,59 R 20
4,44 R 207,39 R 204,85 R 206,84 R 20
6,58 R 209,42 R 205,37 R 207,29 R 20
9,81 R 207,37 R 204,67 R 205,14 R 20
7,15 R 206,95 R 205,52 R 207,68 R 20
6,90 R 207,62 R 204,95 R 105,36 R 10
7,54 R 107,25 R 105,73 R 106,44 R 10
8,02 R 106,58 R 109,11 R 105,66 R 10
6,01 R 108,44 R 105,39 R 106,01 R 10
8,16 R 108,08 R 106,37 R 108,90 R 10
7,35 R 1010,39 R 106,54 R 107,11 R 10
9,61 R 109,47 R 107,54 R 10
10,31 R 10
7,96 R 108,46 R 10
11,31 R 1011,10 R 10
9,09 R 1011,93 R 109,51 R 10
14,41 R 10
10,43 R 1013,23 R 1011,86 R 1016,05 R 10
26,88 R 1012,99 R 512,41
3,64 R 203,54 R 203,54 R 203,54 R 20
3,64 R 203,64 R 203,67 R 203,67 R 20
9,80 R 206,41 R 203,90 R 204,13 R 20
14,65 R 204,39 R 204,55 R 204,63 R 20
6,13 R 205,81 R 204,75 R 206,25 R 20
NadellagerNeedle roller bearingsRoulements à aiguillesAstucci à aiguillesRodamientos de agujas
€ T Q € T Q
74
BK2016BK2020BK2212 BK2216
BK2520BK2526BK2538ZWDBK2820D
BK3020BK3026BK3038ZWDBK4020
NK5/10T2NK5/12T2NK6/10T2NK6/12T2
NK7/10T2NK7/12T2NK8/12T2NK8/16T2
NK9/12T2NK9/16T2 NK10/12T2NK10/16
NK12/12NK12/16NK14/16RNK14/20R
NK15/16RNK15/20RNK16/16RNK16/20R
NK17/16RNK17/20RNK18/16RNK18/20R
NK19/16RNK19/20RNK20/16RNK20/20R
NK21/16RNK21/20RNK22/16RNK22/20R
NK24/16RNK24/20RNK25/16RNK25/20R
NK26/16RNK26/20RNK28/20RNK28/30R
NK29/20RNK29/30RNK30/20RNK30/30R
NK32/20RNK32/30RNK35/20RNK35/30R
NK37/20RNK37/30RNK38/20RNK38/30R
NK40/20RNK40/30RNK42/20RNK42/30R
NK43/20RNK43/30RNK45/20RNK45/30R
NK47/20RNK47/30RNK50/25RNK50/35R
NK55/25RNK55/35RNK60/25RNK60/35R
NK65/25RNK65/35RNK68/25RNK68/35R
6,88 R 209,90 R 20
18,02 R 206,34 R 20
8,19 R 207,25 R 10
10,05 R 1011,44 R 10
9,11 R 109,21 R 10
11,41 R 109,96 R 10
9,08 R 109,08 R 109,36 R 109,36 R 10
9,36 R 1010,01 R 109,36 R 109,98 R 10
9,74 R 109,98 R 109,74 R 10
10,25 R 10
10,12 R 1010,39 R 1010,66 R 1012,58 R 10
11,01 R 1012,82 R 1011,63 R 1013,55 R 10
11,93 R 1013,74 R 1012,31 R 1013,74 R 10
12,58 R 1013,99 R 1012,82 R 1014,77 R 10
13,74 R 1015,45 R 1014,86 R 1016,07 R 10
15,29 R 1017,01 R 1015,28 R 517,35 R 5
16,03 R 517,35 R 517,35 R 520,44 R 5
18,25 R 521,26 R 518,25 R 521,76 R 5
18,77 R 522,33 R 519,72 R 523,21 R 5
20,85 R 525,22 R 521,06 R 538,64 R 5
21,81 R 526,91 R 523,39 R 528,78 R 5
24,26 R 530,00 R 525,84 R 531,31 R 5
27,55 R 533,06 R 529,68 R 235,64 R 2
36,41 R 243,44 R 241,56 R 249,44 R 2
45,96 R 257,05 R 250,24 R 260,71 R 2
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
75
NK70/25RNK70/35RNK73/25RNK73/35R
NK75/25RNK75/35RNK80/25RNK80/35R
NK85/25RNK90/25RNK95/26RNK90/35R
NK95/36RNK100/26RNK100/36RNK105/26R
NK105/36RNK110/30RNK110/40R
NKS20NKS25RNKS28RNKS32
NKS35NKS37NKS40NKS45
NKS50NKS55NKS60
RNA4824RNA4830
RNA4900RRNA4900LRNA4900LLRNA4901R
RNA4901LRNA4901LLRNA4902RRNA4902L
RNA4902LLRNA4903RRNA4903LLRNA4904R
RNA4904LLRNA49/22RRNA4905RRNA4905LL
RNA4906RRNA4906LLRNA49/32RRNA4907R
RNA4907LLRNA4908RRNA4908LLRNA4909R
RNA4909LLRNA4910RRNA4911RRNA4912R
RNA4913RRNA4914RRNA4916RRNA4917R
RNA4918RRNA4919RRNA4924RNA4928
RNA6901RRNA6902RRNA6903RRNA6904R
RNA69/22RRNA6905RRNA6906RRNA69/32R
53,85 R 265,99 R 262,00 R 276,17 R 2
65,58 R 2113,88 R 268,97 R 286,47 R 2
79,72 R 290,46 R 2
103,93 R 2110,74 R 2
121,05 R 2117,50 R 2134,04 R 2134,04 R 2
249,97 R 2156,48 R 2174,19 R 2
17,64 R 523,39 R 525,37 R 529,21 R 5
32,72 R 534,73 R 537,84 R 541,90 R 5
44,95 R 248,17 R 253,27 R 2
220,37 R 2406,75 R 2
14,42 R 1018,37 R 1022,36 R 1015,28 R 10
19,37 R 1023,49 R 1016,07 R 1020,43 R 10
24,59 R 1017,50 R 1026,39 R 1018,85 R 10
27,70 R 1020,85 R 1021,31 R 531,08 R 5
24,59 R 535,35 R 526,85 R 528,37 R 5
39,51 R 531,45 R 543,35 R 535,06 R 5
46,99 R 538,29 R 246,39 R 257,59 R 2
72,38 R 286,47 R 2
103,86 R 2129,90 R 2
147,29 R 2165,93 R 2254,50 R 2340,13 R 2
17,50 R 1018,85 R 1019,72 R 1032,19 R 10
33,63 R 535,45 R 544,66 R 547,05 R 5
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
76
RNA6907RRNA6908RRNA6909RRNA6910R
RNA6911RRNA6912RRNA6913RRNA6914R
RNA6915RRNA6916R
NK8/12T2+1R5X8X12NK9/12T2+1R6X9X12NK9/16T2+1R6X9X16NK10/16+1R7X10X16
NK12/12+1R9X12X12NK12/16+1R9X12X16NK14/16R+1R10X14X16NK14/20R+1R10X14X20
NK16/16R+1R12X16X16NK16/20R+1R12X16X20NK19/16R+1R15X19X16NK19/20R+1R15X19X20
NK21/16R+1R17X21X16NK21/20R+1R17X21X20NK24/16R+1R20X24X16NK24/20R+1R20X24X20
NK26/16R+1R22X26X16NK26/20R+1R22X26X20NK29/20R+1R25X29X20NK29/30R+1R25X29X30
NK32/20R+1R28X32X20NK32/30R+1R28X32X30NK35/20R+1R30X35X20NK35/30R+1R30X35X30
NK37/20R+1R32X37X20NK37/30R+1R32X37X30NK40/20R+1R35X40X20NK40/30R+1R35X40X30
NK43/20R+1R38X43X20NK43/30R+1R38X43X30NK45/20R+1R40X45X20NK45/30R+1R40X45X30
NK47/20R+1R42X47X20NK47/30R+1R42X47X30NK50/25R+1R45X50X25NK50/35R+1R45X50X35
NK55/25R+1R50X55X25NK55/35R+1R50X55X35NK60/25R+1R55X60X25NK60/35R+1R55X60X35
NK68/25R+1R60X68X25NK68/35R+1R60X68X35NK73/25R+1R65X73X25NK73/35R+1R65X73X35
NK80/25R+1R70X80X25NK85/25R+1R75X85X25NK80/35R+1R70X80X35NK85/35R+1R75X85X35
NK90/25R+1R80X90X25NK90/35R+1R80X90X35NK95/26R+1R85X95X26NK95/36R+1R8X95X36
NK100/26R+1R90X100X26NK100/36R+90X100X36NK105/26R+1R95X105X26NK105/36R+1R95X105X36
NK110/30R+1R100X110X30NK110/40R+1R100X110X40
NKS28R+1R20X28X20NKS32+1R25X32X22NKS37+1R30X37X22NKS43+1R35X43X22
NKS50+1R40X50X22NKS55+1R45X55X22NKS60+1R50X60X28NKS65R+1R55X65X28
NKS70R+1R60X70X28
NA4822NA4824NA4826NA4828
50,24 R 557,32 R 566,90 R 578,16 R 2
92,28 R 2108,91 R 2127,03 R 2146,92 R 2
165,34 R 2186,73 R 2
12,74 R 1013,03 R 1019,93 R 1016,97 R 10
13,56 R 1014,11 R 1015,46 R 1017,65 R 10
16,58 R 1018,82 R 1017,29 R 1019,15 R 10
19,15 R 1020,77 R 1020,49 R 1023,23 R 10
22,22 R 1024,46 R 1025,13 R 528,78 R 5
25,94 R 531,45 R 527,62 R 534,28 R 5
29,55 R 536,86 R 531,31 R 539,94 R 5
33,96 R 542,64 R 536,47 R 545,14 R 5
38,94 R 547,91 R 541,90 R 551,75 R 5
50,45 R 262,59 R 257,89 R 270,20 R 2
69,70 R 283,93 R 282,51 R 2
101,69 R 2
95,89 R 2109,64 R 2115,43 R 2130,26 R 2
122,30 R 2150,89 R 2144,74 R 2170,43 R 2
168,98 R 2200,85 R 2190,71 R 2231,96 R 2
222,91 R 2263,44 R 2
31,88 R 540,17 R 548,57 R 554,87 R 5
60,44 R 564,63 R 571,80 R 284,33 R 2
94,08 R 2
236,28 R 2273,95 R 2327,12 R 2369,09 R 2
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
77
NA4830NA4832NA4834NA4836
NA4838
NA4900RNA4900LLNA4901RNA4901LL
NA4902RNA4902LLNA4903RNA4903LL
NA4904RNA4904LLNA49/22RNA4905R
NA4905LLNA49/28RNA4906RNA4906LL
NA49/32RNA4907RNA4907LLNA4908R
NA4908LLNA4909RNA4909LLNA4910R
NA4910LLNA4911RNA4912RNA4913R
NA4914RNA4915RNA4916RNA4917R
NA4918RNA4919RNA4920NA4922
NA4924
NA6901RNA6902RNA6903RNA6904R
NA6905RNA6906RNA69/32RNA6907R
NA6908RNA6909RNA6910RNA6911R
NA6912RNA6913RNA6914RNA6915R
NA6916RNA6917R NA6918RNA6919R
1R5X8X121R5X8X121R5X8X121R5X8X16
1R6X9X10X1R6X9X121R6X9X161R7X10X10.5
1R7X10X121R7X10X161R8X12X101R8X12X10.5
1R8X12X12.51R9X12X121R9X12X161R10X13X12.5
487,79 R 2551,49 R 2681,04 R 2799,74 R 2
927,09 R 2
19,43 R 1027,58 R 1020,14 R 1028,72 R 10
21,47 R 1030,36 R 1023,51 R 1032,72 R 10
25,70 R 1034,74 R 1028,92 R 1028,54 R 5
38,35 R 530,71 R 1032,72 R 543,57 R 5
35,11 R 536,99 R 548,49 R 542,64 R 5
54,64 R 548,07 R 560,35 R 553,27 R 2
65,99 R 264,74 R 277,09 R 295,89 R 2
117,98 R 2129,20 R 2145,82 R 2176,95 R 2
197,92 R 2229,77 R 2267,07 R 2303,51 R 2
367,89 R 2
24,24 R 1026,53 R 1028,63 R 1043,14 R 10
47,28 R 557,59 R 562,25 R 568,47 R 5
78,52 R 589,38 R 5
103,86 R 2120,85 R 2
141,86 R 2163,56 R 2197,92 R 2222,62 R 2
248,00 R 2285,20 R 2378,72 R 2409,51 R 2
5,77 R 1012,57 R 107,46 R 106,28 R 10
6,54 R 55,75 R 56,28 R 55,62 R 5
5,68 R 56,29 R 55,94 R 205,23 R 20
5,23 R 204,41 R 205,57 R 204,79 R 20
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
78
1R10X14X121R10X14X131R10X14X161R10X14X20
1R12X15X121R12X15X12.51R12X15X161R12X15X16.5
1R12X15X22.51R12X16X121R12X16X131R12X16X16
1R12X16X20 1R12X16X221R14X17X171R15X18X16
1R15X18X16.51R15X18X20.51R15X19X161R15X19X20
1R15X20X121R15X20X131R15X20X231R17X20X16
1R17X20X16.51R17X20X201R17X20X20.51R17X20X30.5
1R17X21X201R17X22X131R17X22X161R17X22X23
1R17X24X201R20X24X161R20X24X201R20X25X16
1R20X25X171R20X25X201R20X25X20.51R20X25X26.5
1R20X25X301R20X25X38.51R20X28X201R22X26X16
1R22X26X201R22X28X171R22X28X201R22X28X20.5
1R22X28X301R25X29X201R25X29X301R25X30X12.5
1R25X30X161R25X30X171R25X30X181R25X30X20
1R25X30X20.51R25X30X26.51R25X30X301R25X30X32
1R25X30X38.51R28X32X201R25X32X221R28X32X30
1R29X32X131R30X35X131R30X35X161R30X35X17
1R30X35X201R30X35X20.51R30X35X261R30X35X30
1R30X37X221R32X37X201R32X37X301R32X40X20
1R32X40X361R33X37X131R35X40X16.51R35X40X17
1R35X40X201R35X40X20.51R35X40X301R35X42X20
1R35X42X361R35X43X221R38X43X201R38X43X30
6,19 R 205,57 R 205,57 R 205,87 R 20
5,27 R 205,27 R 205,57 R 205,56 R 20
8,04 R 206,53 R 205,87 R 205,87 R 20
5,87 R 206,98 R 206,37 R 205,87 R 20
5,87 R 209,49 R 205,87 R 206,37 R 20
6,95 R 206,37 R 208,49 R 206,03 R 20
6,03 R 206,71 R 206,71 R 208,84 R 20
6,98 R 206,69 R 207,60 R 209,33 R 20
16,49 R 206,29 R 206,71 R 207,48 R 20
6,98 R 206,98 R 206,98 R 209,33 R 20
11,94 R 2012,87 R 208,26 R 206,66 R 10
7,15 R 107,43 R 107,43 R 107,43 R 10
12,00 R 107,80 R 10
12,00 R 106,60 R 10
8,26 R 107,80 R 108,38 R 107,80 R 10
7,80 R 109,94 R 10
12,28 R 1012,46 R 10
13,64 R 108,07 R 10
10,91 R 1013,10 R 10
10,68 R 107,80 R 108,21 R 108,39 R 10
8,85 R 108,85 R 10
10,65 R 1013,08 R 10
13,64 R 1014,97 R 1013,90 R 1010,09 R 10
15,53 R 1019,97 R 109,56 R 109,61 R 10
10,09 R 1010,09 R 1014,72 R 1011,05 R 10
17,29 R 1014,70 R 1014,35 R 1018,10 R 10
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
79
1R40X45X171R40X45X201R40X45X20.51R40X45X30
1R40X45X401R40X48X221R40X48X401R40X50X20
1R40X50X221R42X47X201R42X47X301R45X50X20
1R45X50X251R45X50X25.51R45X50X351R45X52X22
1R45X52X401R45X55X221R45X55X401R50X55X20
1R50X55X251R50X55X351R50X58X221R50X58X40
1R50X60X201R50X60X251R50X60X281R55X60X25
1R55X60X351R55X63X251R55X63X451R55X65X28
1R60X68X251R60X68X351R60X68X451R60X70X25
1R60X70X281R65X72X251R65X72X451R65X73X25
1R65X73X351R65X75X281R70X80X251R70X80X30
1R70X80X351R70X80X541R70X80X561R75X85X25
1R75X85X301R75X85X351R75X85X541R80X90X25
1R80X90X301R80X90X351R80X90X541R85X95X26
1R85X95X361R85X100X351R85X100X631R90X100X26
1R90X100X301R90X100X361R90X105X351R90X105X63
1R95X105X261R95X105X361R95X110X35 1R95X110X63
1R100X110X301R100X110X401R100X115X401R110X120X30
1R110X125X401R120X130X301R120X135X451R130X145X35
1R130X150X501R140X155X351R140X160X501R150X165X40
1R160X175X401R190X210X501R240X265X60 1R260X285X60
10,60 R 1011,10 R 1011,09 R 1015,83 R 10
20,99 R 1011,82 R 1021,40 R 1016,71 R 10
16,42 R 1012,16 R 1015,83 R 1011,85 R 10
13,57 R 1013,59 R 1016,92 R 1013,87 R 10
24,44 R 1017,21 R 1028,41 R 1014,59 R 10
15,83 R 519,29 R 515,83 R 526,60 R 5
18,30 R 518,96 R 519,76 R 517,52 R 5
20,85 R 517,52 R 530,03 R 525,19 R 5
20,41 R 524,44 R 533,84 R 525,19 R 5
26,33 R 525,19 R 539,44 R 527,74 R 5
27,74 R 526,81 R 529,26 R 532,93 R 5
34,82 R 556,88 R 558,34 R 532,93 R 5
40,40 R 541,90 R 560,21 R 536,41 R 5
44,00 R 545,51 R 563,99 R 541,81 R 5
51,25 R 554,87 R 583,93 R 551,25 R 5
54,20 R 558,27 R 558,27 R 592,12 R 5
54,80 R 569,68 R 569,68 R 599,20 R 5
69,48 R 583,93 R 587,57 R 574,99 R 2
93,88 R 278,53 R 2
106,87 R 293,29 R 2
137,57 R 2109,83 R 2144,67 R 2133,46 R 2
144,67 R 2235,01 R 2518,45 R 2599,93 R 2
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
80
NK1A5902ANK1A5903ANK1A5904ANK1A5905A
NK1A5906ANK1A5907RNK1A5908ANK1A5909A
NK1A5910ANK1A5912ANK1A5913ANK1A5914A
NKX10T2NKX10T2ZNKX12T2NKX12T2Z
NKX15T2NKX15T2ZNKX17T2NKX17T2Z
NKX20T2NKX20T2ZNKX25T2NKX25T2Z
NKX30T2NKX30T2ZNKX35T2NKX35T2Z
NKX40NKX40ZNKX45NKX45Z
NKX50NKX50ZNKX60NKX60Z
NKX70NKX70Z
NKXR15T2NKXR15T2ZNKXR17T2NKXR17T2Z
NKXR20T2NKXR20T2ZNKXR25T2NKXR25T2Z
NKXR30T2NKXR30T2ZNKXR35T2NKXR35T2Z
NKXR40T2NKXR40T2ZNKXR45T2NKXR45T2Z
NKXR50T2NKXR50T2Z
31,08 R 1033,68 R 1037,43 R 1044,74 R 5
50,45 R 558,27 R 568,77 R 589,38 R 5
102,04 R 2142,20 R 2174,06 R 2210,60 R 2
35,67 R 538,75 R 536,63 R 540,40 R 5
37,92 R 541,26 R 539,73 R 543,79 R 5
46,45 R 550,67 R 553,40 R 257,77 R 2
68,59 R 273,83 R 281,05 R 286,13 R 2
87,95 R 293,73 R 2
102,79 R 2108,20 R 2
112,53 R 1119,04 R 1158,51 R 1167,18 R 1
196,12 R 1206,27 R 1
53,40 R 556,58 R 556,45 R 560,08 R 5
71,02 R 575,63 R 577,42 R 281,78 R 2
86,85 R 292,28 R 2
106,87 R 2111,82 R 2
122,82 R 2129,20 R 2144,67 R 2148,37 R 2
161,75 R 2167,18 R 2
NadellagerNeedle roller bearingsRoulements à aiguillesCuscinetti a rulliniRodamientos de agujas
€ T Q € T Q
81
AXK1100AXK1101AXK1102AXK1103
AXK1104AXK1105AXK1106AXK1107
AXK1108AXK1109AXK1110AXK1111
AXK1112AXK1113AXK1114AXK1115
AXK1116AXK1117AXK1118AXK1120
AXK1122AXK1124 AXK1126AXK1128
AXK1130AXK1132
AS1100AS1101AS1102AS1103
AS1104AS1105AS1106AS1107
AS1108AS1109AS1110AS1111
AS1112AS1113AS1114AS1115
AS1116AS1117AS1118AS1120
AS1122AS1124AS1128AS1130
AS1132
2,48 R 202,50 R 202,55 R 202,58 R 20
2,79 R 202,98 R 103,31 R 103,85 R 10
4,25 R 104,95 R 105,74 R 106,59 R 5
7,93 R 510,22 R 514,22 R 517,04 R 5
20,34 R 523,49 R 527,03 R 533,37 R 5
34,01 R 596,45 R 5
201,24 R 5218,82 R 5
216,66 R 5227,12 R 5
0,67 R 200,67 R 200,67 R 200,67 R 20
0,67 R 200,82 R 200,99 R 101,09 R 10
1,57 R 101,71 R 101,96 R 102,23 R 5
2,65 R 52,93 R 53,72 R 54,50 R 5
5,37 R 56,47 R 57,74 R 59,85 R 5
16,24 R 522,99 R 525,80 R 530,75 R 5
38,07 R 5
Axial-NadellagerNeedle roller thrust bearingsButées à aiguillesGabbia assiale a rulliniRodamientos axiales de agujas
€ T Q € T Q
82
81102T281103T281104T281105T2
81106T281107T281108T281109T2
81110T281111T281112T281118T2
81120T2
81208T281209T281210T281211T2
81212T281213T281214T281216
81218J
K81102T2K81103T2K81104T2K81105T2
K81106T2K81107T2K81108T2K81109T2
K81110T2K81111T2K81112T2K81113
K81114T2K81118
K81206T2K81208T2K81209T2
WS81101WS81102WS81103WS81104
WS81105WS81106WS81107WS81108
WS81109WS81110WS81111WS81112
WS81113WS81114WS81117WS81118
WS81120
WS81206WS81207WS81208
GS81102GS81103GS81104GS81105
GS81106GS81107GS81108GS81109
GS81110GS81111GS81112GS81113
GS81114GS81115
GS81206
29,52 R 1029,52 R 1032,28 R 1035,37 R 5
37,20 R 542,51 R 546,38 R 551,09 R 5
56,23 R 273,11 R 279,11 R 2
154,09 R 2
179,47 R 2
66,35 R 577,22 R 588,58 R 2
116,87 R 2
123,61 R 2131,44 R 2145,18 R 2171,04 R 2
229,65 R 2
14,11 R 1014,11 R 1015,37 R 1016,62 R 5
17,70 R 519,56 R 523,01 R 526,81 R 5
29,06 R 239,68 R 243,09 R 243,56 R 2
44,99 R 264,96 R 2
25,94 R 532,24 R 535,37 R 5
7,66 R 107,69 R 107,69 R 108,46 R 10
9,39 R 59,75 R 5
11,47 R 511,69 R 5
12,13 R 513,60 R 216,40 R 217,18 R 2
21,85 R 224,53 R 235,67 R 243,35 R 2
48,17 R 2
13,45 R 516,59 R 516,83 R 5
7,69 R 107,69 R 108,46 R 109,39 R 5
9,75 R 511,47 R 511,69 R 512,13 R 5
13,60 R 216,40 R 217,95 R 222,19 R 2
24,53 R 228,15 R 2
13,45 R 5
Axial-ZylinderrollenlagerCylindrical roller thrust bearingsButées à rouleaux cylindriquesCuscinetti assiali cilindrici a rulliRodamientos axiales de rodillos cilíndricos
€ T Q € T Q
83
RNA22/6LLRNA22/8LLRNA2202LLRNA2203LL
RNA2204LLRNA2205LL
NA22/6LLNA22/8LLNA2200LLNA2201LL
NA2202LLNA2203LLNA2204LLNA2205LL
NA2206LLNA2208LLNA2210LL
NATR5NATR5LLNATR6NATR6LL
NATR6XNATR6XLLNATR8NATR8LL
NATR8XLLNATR10NATR10LLNATR10XLL
NATR12NATR12LLNATR12XLLNATR15
NATR15LLNATR15XLLNATR17NATR17LL
NATR17XLLNATR20NATR20LLNATR20X
NATR25NATR25LLNATR25XLLNATR30
NATR30LLNATR35NATR35LLNATR35X
NATR35XLLNATR40NATR40LLNATR40X
NATR40XLLNATR45NATR45LLNATR45XLL
NATR50NATR50LLNATR50XLL
NATV5NATV5LLNATV5XLLNATV6
NATV6LLNATV8NATV8LLNATV10
NATV10LLNATV12NATV12LLNATV12X
NATV12XLLNATV15NATV15LLNATV15XLL
14,68 R 1016,43 R 1031,05 R 1033,33 R 10
36,99 R 1041,69 R 10
21,09 R 1022,98 R 1035,29 R 1037,92 R 10
38,77 R 1041,67 R 1045,45 R 1051,16 R 5
57,32 R 5103,91 R 5247,41 R 5
19,96 R 1022,54 R 1019,96 R 1022,73 R 10
19,97 R 1025,09 R 1023,23 R 1026,27 R 10
28,87 R 1033,91 R 1037,48 R 1041,33 R 10
37,36 R 1041,26 R 1045,23 R 1039,66 R 10
45,04 R 1049,60 R 1043,57 R 1048,93 R 10
53,97 R 1048,57 R 554,72 R 548,53 R 5
52,84 R 559,48 R 565,54 R 565,28 R 5
72,01 R 5106,18 R 5123,77 R 596,53 R 5
137,57 R 5118,26 R 5142,46 R 5125,40 R 5
142,31 R 5157,84 R 5164,65 R 5182,82 R 5
133,98 R 5159,61 R 5187,37 R 5
19,97 R 1022,54 R 1024,81 R 1021,36 R 10
22,73 R 1023,23 R 1026,27 R 1033,90 R 10
37,48 R 1037,36 R 1041,26 R 1037,32 R 10
45,23 R 1039,66 R 1045,04 R 1049,40 R 10
KurvenrollenCam followersGaletsPerni folliRoldanas
€ T Q € T Q
84
NATV17NATV17LLNATV20NATV20LL
NATV20XLLNATV25NATV25LLNATV30
NATV30LLNATV30XLLNATV35NATV35LL
NATV40NATV40LLNATV50NATV50LL
NUTR202NUTR202XNUTR203NUTR203X
NUTR204NUTR204XNUTR205NUTR205X
NUTR206NUTR206XNUTR207NUTR207X
NUTR208NUTR208XNUTR209NUTR209X
NUTR210NUTR210X
NUTR302NUTR302XNUTR303NUTR303X
NUTR304NUTR304XNUTR305NUTR305X
NUTR306NUTR306XNUTR307NUTR307X
NUTR308NUTR308XNUTR309NUTR309X
NUTR310NUTR310X
KR16KR16XKR16LLKR16XLLH
KR19KR19LLKR19XLLKR22
KR22XKR22LLKR22XLLKR26
KR26LLKR26XLLKR30KR30LL
KR30XLLKR32KR32LLKR32XLL
KR35KR35XKR35LLHKR35XLLH
43,57 R 1048,93 R 1051,82 R 554,72 R 5
60,22 R 552,84 R 559,48 R 565,54 R 5
72,01 R 579,13 R 5
118,33 R 5132,94 R 5
126,65 R 5168,00 R 5168,75 R 5179,26 R 5
47,19 R 1059,62 R 1051,25 R 1054,80 R 10
55,74 R 1059,62 R 1061,36 R 565,35 R 5
73,45 R 578,54 R 585,04 R 591,16 R 5
107,48 R 5114,08 R 5115,81 R 5123,83 R 5
142,58 R 2152,50 R 2
56,58 R 1060,19 R 1059,86 R 1064,20 R 10
61,73 R 1065,93 R 1073,45 R 578,54 R 5
85,40 R 591,16 R 594,45 R 5
100,89 R 5
121,23 R 5128,99 R 5138,59 R 2147,91 R 2
177,67 R 2189,76 R 2
36,62 R 1040,35 R 1035,47 R 1043,00 R 10
34,89 R 1036,86 R 1044,53 R 1036,41 R 10
40,88 R 1039,08 R 1047,13 R 1037,92 R 5
41,26 R 549,95 R 546,04 R 549,09 R 5
59,65 R 548,35 R 551,88 R 563,18 R 5
53,57 R 557,35 R 563,77 R 563,77 R 5
KurvenrollenCam followersGaletsPerni folliRoldanas
€ T Q € T Q
85
KR40KR40LLKR40XLLKR47
KR47LLKR47XLLKR52KR52LL
KR52XLLKR62KR62LLKR62XLL
KR72KR72LLKR72XLLKR80XLL
KR85LLKR85XLLKR90KR90LLH
KR90XLL
KRV16KRV16LLKRV16XLLKRV19H
KRV19LLKRV19XLLKRV22KRV22LLH
KRV26KRV26LLKRV26XLLKRV30
KRV30LLKRV30XLLKRV32KRV32LL
KRV32XLLKRV35LLKRV40KRV40LL
KRV40XLLKRV47KRV47LLHKRV52
KRV52LLHKRV52XLLHKRV62HKRV62LLH
KRV62XLLKRV72KRV72LLKRV80
KRV80LLHKRV80XLLKRV90
NUKR35NUKR35XNUKR40NUKR40X
NUKR47NUKR47XNUKR52NUKR52X
NUKR62NUKR62XNUKR72NUKR80
NUKR90
63,82 R 568,59 R 575,58 R 582,86 R 5
89,38 R 596,59 R 586,13 R 291,55 R 2
100,38 R 2108,20 R 2115,52 R 2123,77 R 2
119,23 R 2129,32 R 2138,08 R 2179,56 R 2
197,15 R 2216,89 R 2202,05 R 2199,58 R 2
220,25 R 2
33,30 R 1035,47 R 1038,77 R 1038,37 R 10
36,86 R 1040,63 R 1040,04 R 1047,13 R 10
41,69 R 1041,26 R 545,23 R 550,78 R 5
49,09 R 553,97 R 553,14 R 551,88 R 5
63,18 R 558,12 R 563,77 R 568,59 R 5
68,59 R 595,15 R 596,84 R 585,17 R 2
90,92 R 2100,38 R 2107,88 R 2115,73 R 2
127,54 R 2119,23 R 2129,28 R 2156,71 R 2
168,87 R 2185,41 R 2202,12 R 2
62,10 R 568,50 R 573,83 R 581,49 R 5
95,89 R 5105,69 R 599,16 R 2
109,24 R 2
127,03 R 2139,35 R 2142,58 R 2182,03 R 2
214,59 R 2
KurvenrollenCam followersGaletsPerni folliRoldanas
€ T Q € T Q
86
SN507LSN508LSN509L
SN510LSN511LSN512L
SN513LSN515LSN516L
SN517LSN518LSN519L
SN520LSN522LSN524L
SN526LSN528LSN530L
SN532L
SN606LSN607LSN608L
SN609LSN610LSN611L
SN612LSN613LSN615L
SN616LSN617LSN619Z2
112,02120,33125,33
135,05170,66189,17
225,49239,72303,80
341,77384,51465,19
571,99766,61892,42
1.143,991.447,801.552,22
2.117,10
114,65131,73141,94
183,23192,48220,48
249,20301,43393,98
481,80545,91659,80
StehlagergehäusePlummer BlockPaliers à semelleUnità di supportoSoportes
€ T Q € T Q
87
H205XH206XH207X
H208XH209XH210X
H211XH212XH213X
H215H216H217
H218H219H220
H222
H305XH306XH307X
H308XH309XH310X
H311XH312XH313X
H314H315H316
H317H318H319
H320H322
H2305XH2306XH2307X
H2308XH2309XH2310X
H2311XH2312XH2313X
H2314H2315H2316
H2317H2318H2319
H2320H2322H2324
H2326H2328H2330
H2332H2334H2336
H2338H2340
16,59 D 516,78 D 517,70 D 5
18,73 D 523,00 D 524,65 D 5
26,70 D 529,15 D 231,31 D 2
55,10 D 264,99 D 273,82 D 2
85,07 D 2102,13 D 2107,33 D 2
127,05
16,59 D 517,18 D 518,96 D 5
20,40 D 523,60 D 226,70 D 2
27,90 D 229,60 D 233,03 D 2
53,0557,12 D 268,46 D 2
78,47 D 288,51 D 2
101,25
113,38142,77
25,98 D 525,57 D 525,99 D 5
26,23 D 530,38 D 232,57 D 2
35,66 D 247,50 D 254,48 D 2
68,3873,82 D 288,20 D 2
92,22 D 2114,41 D 2142,69 D 2
155,93 D 2181,73 D 2249,57 D 2
338,18 D 2397,74 D 2514,91 D 2
577,29 D 2738,23 D 2755,90 D 2
1.085,01 D 21.109,05
SpannhülsenAdapter sleevesManchons de serrageBussole di trazioneManguitos de Montaje
€ T Q € T Q
88
H3024H3026H3028
H3030H3032H3034
H3036H3038H3040
H3044H3048H3052
H3056H3060H3064
H3068
H3122H3124H3126
H3128H3130H3132
H3134H3136H3138
H3140H3144H3148
H3152H3156H3160
H3164
171,48208,92281,07
383,62414,54446,00
554,02654,34822,64
1.093,841.337,991.609,21
1.871,712.037,212.850,83
3.851,01
172,83172,12222,77
287,05396,40463,72
499,35595,94685,60
801,921.302,161.447,36
1.781,362.206,112.553,21
4.466,42
SpannhülsenAdapter sleeves
Manchons de serrageBussole di trazione
Manguitos de Montaje
€ T Q € T Q
89
AH308AH309AHX310
AHX311AHX312AH313
AH314AH315AH316
AHX317AHX318AHX319
AHX320
AH2308AH2309AHX2310
AHX2311AHX2312AH2313
AHX2314AHX2315AHX2316
AHX2317AHX2318AHX2319
AHX2320AHX2322AHX2324
AH2326AHX2328AHX2330
AH2332AH2334AH2336
AH2338AH2340
AHX3024AHX3026AHX3028
AHX3030AH3032AH3034
AH3036AH3038AH3040
AH3044AH3048AH3052
AH3056AH3060
AH3120AHX3122AHX3124
AHX3126AHX3128AHX3130
AH3132AH3134AH3136
AH3138AH3140AH3144
AH3148
AHX3218AHX3220AHX3222
AHX3224AHX3226AHX3228
AHX3230AH3232AH3234
AH3236AH3238AH3240
64,2665,1966,42
72,6373,7776,78
78,5382,37
103,85
91,2195,24
107,07
118,31
67,4269,7472,83
76,2978,6388,39
92,2696,6892,01
115,66118,31145,63
148,01188,61212,17
246,33360,83431,42
606,47648,42805,54
937,471.002,45
148,12189,23220,81
238,76294,08326,65
373,28454,14539,46
662,14931,32
1.128,73
1.337,321.601,58
155,74176,35199,66
219,20285,39339,15
435,16431,42551,54
626,78704,09954,41
1.196,40
113,96142,17171,56
215,97236,56296,67
413,99544,33614,41
691,72839,67940,75
AbziehhülsenWithdrawal sleevesManchons de démontageBussole di pressione per cuscinetti orientabili a rulliManguitos de desmontaje
€ T Q € T Q
90
AN00AN01AN02
AN03AN04AN05
AN06AN07AN08
AN09AN10AN11
AN12AN13AN14
AN15AN16AN17
AN18AN19AN20
AN21AN22AN23
AN24AN25AN26
AN27AN28AN29
AN30AN31AN32
AN33AN34AN36
AN38AN40
AW00AW01XAW02
AW03XAW04XAW05X
AW06XAW07XAW08X
AW09XAW10XAW11X
AW12XAW13XAW14X
AW15XAW16XAW17X
AW18XAW19AW20X
AW21XAW22AW23
AW24XAW25AW26X
AW27AW28XAW29
AW30XAW31AW32X
AW33AW34AW36
AW38AW40X
3,783,784,18
5,236,977,42
8,039,239,38
9,9511,5412,47
13,4816,2718,81
19,5926,5232,59
38,0341,3346,13
49,7060,2785,39
72,1899,0187,42
135,00109,74158,00
127,63174,22142,27
178,42166,00182,71
204,83222,38
0,900,900,84
0,841,001,00
1,001,001,00
1,221,391,71
1,872,022,29
2,373,183,51
3,874,375,44
5,866,528,29
8,2914,8614,86
20,2019,1422,06
22,5639,4730,57
35,1636,8337,87
43,3846,85
Muttern, SicherungsblecheLocknut, LookwasherEcrous, RondellesGhiere di bloccaggio, GhiereTuerca, Arandela
€ T Q € T Q
91
Kurzzeichen und TypenübersichtBasic part number and common variationsDesignation et gammeCodici e varianti comuniReferencia básica y variaciones
92
Gehäuse Lager UC 94 UEL 95 UK 96 AS 98 AEL 98 CS 97
P UCP 101 UELP 102 UKP 103 ASP 104 AELP 104
Grauguß
UP (PW) UCPW 105 ASUP 105 AELUP 105
Grauguß
PP ASPP 106 AELPP 106 CSPP 106
Stahlblech
F UCF 101 UELF 102 UKF 103 ASF 104 AELF 104
Grauguß
FS UCFS 101 UELFS 102 UKFS 103mit ZentrieransatzGrauguß
FC UCFC 107 UELFC 107 UKFC 108 AELFC 108mit ZentrieransatzGrauguß
FL UCFL 101 UELFL 102 UKFL 103 ASFL 104 AELFL 104
Grauguß
FB (FW) ASFB 109 AELFB 109
Grauguß
FA UCFA 110 UELFA 110 ASFA 111 AELFA 111
Grauguß
PF ASPF 112 AELPF 112 CSPF 112
Stahlblech
PFL ASPFL 113 AELPFL113 CSPFL 113
Stahlblech
Lager mit UCS 99 UELS 99 ASS 100 AELS 100zylindrischemAußendurchmesser
Nachsetzzeichen D1 = nachschmierbarSuffix D1 = to relubricateSuffixes D1 = rainure et trou de lubrificationSuffisso D1 = rilubrificabileSufigo D1 = con ranura y agujero de re-engrase
Kurzzeichen und TypenübersichtBasic part number and common variations
Designation et gammeCodici e varianti comuni
Referencia básica y variaciones
93
Gehäuse Lager UC 94 UEL 95 UK 96 AS 98 AEL 98 CS 97
C UCC 114 UELC 115 UKC 116 ASC 117 AELC 117
Grauguß
T UCT 118 UELT 119 UKT 120 AELT 121
Grauguß
HB UCHB 111
Grauguß
PT ASPT 122 AELPT 122
T UCT 123 UELT 123 AELT 124
L UCL 124M UCM 125
Lager mit zylindrischem UCS 99 UELS 99 ASS 100 AELS 100Außendurchmesser
Gußgehäuse mit zusätzlichen Stahlblech- Guß-DichtkappeDichtkappen Dichtkappe
S-C- SM-CM- S-Dichtkappe C-Dichtkappe
S(M)-P S-UCP 126 S-UKP 127C(M)-P C-UCP 126 C-UKP 128
S(M)-F S-UCF 129 S-UKF 130C(M)-F C-UCF 129 C-UKF 131
C(M)-FS C-UCFS 129 C-UKFS 131
S(M)-FC S-UCFC 132 S-UKFC 133C(M)-FC C-UCFC 132 C-UKFC 133
S(M)-FL S-UCFL 129 S-UKFL 130C(M)-FL C-UCFL 129 C-UKFL 131
S(M)-T S-UCT 134 S-UKT 135C(M)-T C-UCT 134 C-UKT 136
Zubehör MSS 137 S5W 137 HRS 138 GA 139 GB 139 GC 139
einseitig geschlossen
beidseitig offen
Kugellagereinsätze für GehäuseBearing unit insertsRoulements de paliersCuscinetti (inserti) per supportiRodamientos para soportes
€ T Q € T Q
94
dmm UC
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
080 216085 217090 218
dmm UC
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322120 324130 326
140 328
25,2625,2625,26
25,26 GD 1031,03 GD 1035,69 GD 10
42,88 GD 1051,39 GD 1057,76 GD 5
65,38 GD 584,40 GD 5
107,35 GD 5
124,38 D 2162,14 D 2186,57 D 2
222,10 D 2266,53 D 2342,07 D 2
60,9072,60
84,06101,67116,53
140,30175,99202,27
254,73299,29354,48
430,92477,61562,51
641,04859,67946,70
1.071,941.449,771.950,72
2.313,69
Kugellagereinsätze für GehäuseBearing unit inserts
Roulements de paliersCuscinetti (inserti) per supporti
Rodamientos para soportes
€ T Q € T Q
95
dmm UEL
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
dmm UEL
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322
34,29 D 1040,73 D 1046,65 D 10
55,97 D 1066,03 D 1078,48 D 5
83,65 D 5105,88137,71
160,92218,19280,86
69,8983,65
99,21117,71130,31
154,74191,01241,35
276,20324,18397,70
478,16564,03651,46
725,74886,65
1.054,54
1.241,79
Kugellagereinsätze für GehäuseBearing unit insertsRoulements de paliersCuscinetti (inserti) per supportiRodamientos para soportes
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
96
dmm UK
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
065 215070 216075 217
080 218
dmm UK
020 305025 306030 307
035 308040 309045 310
050 311055 312060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
30,21 D 1036,36 D 1045,16 D 10
54,12 D 1062,56 D 569,38 D 5
88,84 D 5113,75 D 5134,62
201,94249,90294,77
372,90
60,9072,6084,06
101,67116,53140,30
175,99202,27254,73
354,48430,92477,61
562,51641,04859,67
1.071,941.449,771.950,72
2.313,69
Kugellagereinsätze für GehäuseBearing unit inserts
Roulements de paliersCuscinetti (inserti) per supporti
Rodamientos para soportes
€ T Q € T Q
97
dmm CS
010 200LLU
012 201LLU015 202LLU017 203LLU
020 204LLU025 205LLU030 206LLU
035 207LLU040 208LLU045 209LLU
050 210LLU
dmm CS
025 305LLU030 306LLU
035 307LLU040 308LLU045 309LLU
050 310LLU
13,69
14,36 D 1015,18 D 1016,36 D 10
19,78 D 1023,18 D 1029,62 D 10
39,62 D 1044,51 D 1053,16 D 5
59,62 D 5
24,2337,37
57,4359,5394,10
103,35
Kugellagereinsätze für GehäuseBearing unit insertsRoulements de paliersCuscinetti (inserti) per supportiRodamientos para soportes
€ T Q € T Q
98
dmm AS
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210
dmm AEL
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
19,49 D 1019,49 D 1019,49 D 10
21,83 D 1023,36 D 1029,03 D 10
31,18 D 1039,3054,33
60,28
25,1025,1025,10
27,77 D 1030,12 D 1037,10 D 10
44,28 D 1051,54 D 1066,03 D 5
72,27 D 577,90
102,11
Kugellagereinsätze für GehäuseBearing unit inserts
Roulements de paliersCuscinetti (inserti) per supporti
Rodamientos para soportes
€ T Q € T Q
99
dmm UCS
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
080 216085 217090 218
dmm UELS
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
26,4026,4026,40
26,4032,4237,29
44,8153,7160,35
68,3188,20
112,18
129,98169,44194,98
232,12278,51357,46
35,8342,5648,74
58,4969,0082,01
87,41110,62137,71
160,92218,19280,85
Kugellagereinsätze für GehäuseBearing unit insertsRoulements de paliersCuscinetti (inserti) per supportiRodamientos para soportes
€ T Q € T Q
100
dmm ASS
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210
dmm AELS
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210
19,4919,4919,49
21,8323,3629,03
31,1839,3054,33
60,28
26,2426,2426,24
29,0331,4638,77
46,2653,8569,48
75,51
UCPd UCFmm UCFL
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
080 216085 217090 218
UCPUCF
d UCFLmm UCFS
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322120 324130 326
140 328
39,0339,0339,03
39,03 GD 1045,30 GD 1054,35 GD 10
63,52 GD 1077,00 GD 1084,40 GD 5
99,95 GD 5130,31 GD 5156,96 GD 5
192,48 D 2233,21 D 2271,71 D 2
324,26 D 2396,11 D 2490,14 D 2
86,61104,65
123,96148,59175,12
218,63263,21316,28
362,98401,19511,55
617,68685,60776,88
897,881.071,941.270,49
1.449,771.988,922.632,08
3.162,74
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
101
UELPd UELFmm UELFL
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
UELPUELF
d UELFLmm UELFS
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322
53,09 D 1061,31 D 1074,78 D 10
87,36 D 1093,30 D 10
108,85 D 5
125,11 D 5154,00197,29
235,20298,64386,84
93,30113,28
130,31156,23182,86
228,77290,97343,52
413,16516,83622,82
740,42822,44932,29
1.080,871.265,781.491,69
1.723,78
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
102
UKPd UKFmm UKFL
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
065 215070 216075 217
080 218
UKPUKF
d UKFLmm UKFS
020 305025 306030 307
035 308040 309045 310
050 311055 312060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
46,72 D 1057,15 D 1068,87 D 10
79,95 D 1090,31 D 5
105,14 D 5
132,52 D 5169,44 D 5205,79
296,32351,25420,91
534,63
86,61104,65123,96
148,59177,69218,63
263,21316,28362,98
511,55617,68685,60
776,88898,01
1.071,94
1.449,771.999,762.632,08
3.162,74
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
103
ASPd ASFmm ASFL
020 204025 205030 206
035 207040 208045 209
050 210
AELPd AELFmm AELFL
020 204025 205030 206
035 207040 208045 209
050 210
34,3438,2249,83
53,6265,8584,33
98,26
44,56 GD 1051,25 GD 1062,27 GD 10
71,60 GD 1079,22 GD 1098,46 GD 5
111,06 GD 5
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
104
d UCUPmm (UCPW)
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210
ASUP(ASPW)
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
d AELUPmm (AELPW)
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210
56,2556,2556,25
56,2564,8573,05
92,0798,26
112,18
129,98
48,0648,0648,06
50,3055,9464,78
78,1684,33
114,50
55,7955,7955,79
57,5166,3878,92
92,07103,67127,67
133,85
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Siehe Gehäuselagerkatalog: UP.See bearing unit catalog: UP.Voir catalogue paliers: UP.Vedi catalogo supporti : UP.Ver catálogo de soportes: UP.
105
Gehäuselager (Stahlblech)Bearing units (Pressed steel housing)Paliers tôleSupporti (acciaio)Soportes de chapa de acero
€ T Q € T Q
106
dmm ASPP
012 201015 202017 203
020 204025 205030 206
035 207
dmm AELPP
012 201015 202017 203
020 204025 205030 206
035 207
dmm CSPP
017 203LLU
020 204LLU025 205LLU030 206LLU
035 207LLU
25,07 D 1025,07 D 1025,07 D 10
28,25 D 1030,11 D 1035,90 D 10
41,08 D 10
32,7232,7232,72
36,20 D 1038,83 D 1046,21 D 10
55,94 D 10
25,14
29,8633,8940,94
55,94
dmm UCFC
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
080 216085 217090 218
dmm UELFC
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
47,4447,4447,44
47,44 D 1055,92 D 1067,31 D 10
79,22 D 1085,88 D 10
100,70 D 5
114,03 D 5148,82 D 5179,90 D 5
221,26305,60380,66
436,36515,29603,47
53,6864,2778,48
91,8197,74
114,75
131,78168,67207,35
247,59312,56406,98
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
107
dmm UKFC
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
065 215070 216075 217
080 218
dmm AELFC
020 204025 205030 206
035 207040 208045 209
050 210
58,1969,1881,23
95,95111,42123,80
153,98193,42225,91
384,53431,72516,83
589,57
53,5659,4974,28
86,66100,59116,81
127,67
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
108
d ASFBmm (ASFW)
012 201015 202017 203
020 204025 205030 206
035 207040 208
d AELFBmm (AELFW)
012 201015 202017 203
020 204025 205030 206
035 207040 208
37,7037,7037,70
40,0044,7252,63
60,8867,62
45,4145,4145,41
47,9854,4565,54
76,5985,09
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Siehe Gehäuselagerkatalog: FBSee bearing unit catalog: FBVoir catalogue paliers: FBVedi catalogo supporti : FBVer catálogo de soportes: FB
109
dmm UCFA
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211
dmm UELFA
020 204025 205030 206
035 207040 208045 209
050 210055 211
49,5649,5649,56
49,5658,0270,35
82,7889,74
105,22
119,15155,51
55,4964,0778,16
91,3097,50
113,75
130,74160,92
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
110
dmm ASFA
020 204
025 205030 206035 207
040 208045 209050 210
dmm AELFA
020 204025 205030 206
035 207040 208045 209
050 210
dmm UCHB
015 202017 203020 204
025 205030 206035 207
040 208045 209050 210
055 211060 212065 213
34,34
38,3749,8353,62
65,8584,3398,26
46,5753,5665,08
74,8282,78
102,91
116,05
53,9853,9853,98
61,5977,7391,35
107,96112,12131,72
155,02210,15265,27
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
111
Gehäuselager (Stahlblech)Bearing units (Pressed steel housing)Paliers tôleSupporti (acciaio)Soportes de chapa de acero
€ T Q € T Q
112
dmm ASPF
012 201015 202017 203
020 204025 205030 206
035 207040 208
dmm AELPF
012 201015 202017 203
020 204025 205030 206
035 207040 208
dmm CSPF
017 203LLU
020 204LLU025 205LLU030 206LLU
035 207LLU040 208LLU
24,2924,2924,29
26,15 D 1028,25 D 1035,13 D 10
40,70 D 1051,99
31,7231,7231,72
34,98 D 1037,59 D 1045,04 D 10
54,33 D 1066,47
21,61
26,9131,1037,70
49,5662,20
Gehäuselager (Stahlblech)Bearing units (Pressed steel housing)
Paliers tôleSupporti (acciaio)
Soportes de chapa de acero
€ T Q € T Q
113
dmm ASPFL
012 201015 202017 203
020 204025 205030 206
035 207040 208
dmm AELPFL
012 201015 202017 203
020 204025 205030 206
035 207040 208
dmm CSPFL
017 203LLU
020 204LLU025 205LLU030 206LLU
035 207LLU040 208LLU
24,3724,3724,37
26,60 D 1028,56 D 1034,82 D 10
41,70 D 1051,61
31,0331,0331,03
34,13 D 1036,76 D 1045,41 D 10
55,70 D 1066,00
22,75
27,6931,6640,22
59,7966,00
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
114
dmm UCC
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
dmm UCC
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322120 324130 326
140 328
49,5649,5649,56
47,4455,5267,31
79,2285,88
100,70
114,03148,82179,90
221,26
85,09110,62
119,15143,13167,12
214,31269,25321,08
369,83420,11502,90
608,89702,53795,36
928,421.086,281.327,67
1.470,011.969,832.727,29
3.297,48
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
115
dmm UELC
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
dmm UELC
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322
55,4964,0778,16
91,3097,50
113,75
130,74160,92197,29
235,20
97,50118,38
136,17163,26191,10
239,06304,06358,23
413,16516,83622,82
740,42822,44932,29
1.080,871.265,781.491,69
1.723,78
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
116
dmm UKC
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
dmm UKC
020 305025 306030 307
035 308040 309045 310
050 311055 312060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
48,8361,8371,96
83,5694,37
109,85
138,48169,44205,79
90,51109,37129,54
155,26185,69228,47
275,05330,51379,31
534,56645,50716,46
811,85938,30
1.120,18
1.515,012.089,762.750,52
3.305,06
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
117
dmm ASC
020 204025 205030 206
035 207040 208045 209
050 210
dmm AELC
020 204025 205030 206
035 207040 208045 209
050 210
34,3438,2249,83
53,6265,8584,33
98,26
46,5753,5665,08
74,8282,78
102,91
116,05
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
118
dmm UCT
012 201015 202017 203
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213070 214075 215
080 216085 217
dmm UCT
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322120 324130 326
140 328
47,4447,4447,44
47,44 D 1055,52 D 1067,31 D 10
79,22 D 1085,88 D 10
100,70 D 5
114,03 D 5148,82 D 5179,17 D 5
211,74292,44364,28
417,58493,10
89,59106,61
125,11149,55189,54
229,52286,52327,24
376,87434,62521,97
631,55725,59821,84
995,061.165,351.481,62
1.647,982.238,302.966,35
3.521,87
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
119
dmm UELT
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
dmm UELT
025 305030 306
035 307040 308045 309
050 310055 311060 312
065 313070 314075 315
080 316085 317090 318
095 319100 320105 321
110 322
59,6264,2778,48
91,8197,74
114,75
131,78161,41198,42
97,50118,38
136,17163,26191,10
239,06304,06358,23
413,16516,83622,82
740,42822,44932,29
1.080,871.265,781.491,69
1.723,78
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
120
dmm UKT
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
065 215070 216075 217
dmm UKT
020 305025 306030 307
035 308040 309045 310
050 311055 312060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
49,9863,0274,02
82,1795,51
111,78
140,67168,81215,08
324,94398,47478,94
86,61104,65123,96
148,59177,69218,63
263,21300,60362,98
511,55617,68685,60
776,88897,88
1.071,94
1.449,771.999,762.632,08
3.162,74
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
121
dmm AELT
020 204025 205030 206
035 207040 208045 209
050 210
46,2153,5666,38
78,16109,10117,60
123,03
Gehäuselager (Stahlblech)Bearing units (Pressed steel housing)Paliers tôleSupporti (acciaio)Soportes de chapa de acero
€ T Q € T Q
Preise mit Rahmen.Prices including frame.Les prix comprennent le cadre.I prezzi comprendono il collarePrecio comprende el Marco.
122
dmm ASPT
012 201-10015 202-10017 203-10
020 204-10025 205-10
dmm AELPT
012 201-10015 202-10017 203-10
020 204-10025 205-10
69,3069,3069,30
71,6573,17
85,8885,8885,88
88,2095,95
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise mit Rahmen.Prices including frame.Les prix comprennent le cadre.I prezzi comprendono il collarePrecio comprende el Marco.
123
dmm UCT
012 201-15015 202-15017 203-15
020 204-15025 205-15030 206-15
035 207-23040 208-30045 209-30
050 210-30055 211-30060 212-30
065 213-30
dmm UELT
020 204-15025 205-15030 206-15
035 207-23040 208-30045 209-30
050 210-30
206,59206,59206,59
206,59207,35231,32
265,39343,51344,32
399,24499,82553,20
646,81
219,74224,37260,74
298,64376,03398,47
439,46
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise mit Rahmen.Prices including frame.Les prix comprennent le cadre.I prezzi comprendono il collarePrecio comprende el Marco.
124
dmm AELT
020 204-15025 205-15030 206-15
035 207-23040 208-30045 209-30
050 210-30
dmm UCL
020 204-10204-20204-30204-40
025 205-10205-20205-30205-40
030 206-10206-20206-30206-40
035 207-10207-20207-30207-40
040 208-10208-20208-30208-40
045 209-10209-20209-30209-40
235,98259,98273,11
322,63387,63396,14
439,46
316,44341,19353,60362,09
331,93357,46365,18374,47
359,77384,53394,60410,85
384,53407,75424,00441,00
474,28516,05653,76693,22
498,26543,92682,42723,42
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise mit Rahmen.Prices including frame.Les prix comprennent le cadre.I prezzi comprendono il collarePrecio comprende el Marco.
125
dmm UCM
040 208-50208-60208-70208-80208-90
045 209-50209-60209-70209-80209-90
050 210-50210-60210-70210-80210-90
055 211-50211-60211-70211-80211-90
060 212-50212-60212-70212-80212-90
dmm UCM
065 313-50313-60313-70313-80313-90
070 314-50314-60314-70314-80314-90
075 315-50315-60315-70315-80315-90
080 316-50316-60316-70316-80316-90
085 317-50317-60317-70317-80
090 318-50318-60318-70318-80318-90
814,71847,99875,81913,75923,79
807,74837,91866,52895,94911,40
849,51882,77919,15957,05995,75
983,361.024,371.106,371.162,101.196,14
1.084,711.124,951.204,641.267,321.328,44
1.306,001.312,971.442,161.505,591.558,22
1.483,941.579,881.659,591.719,141.777,17
1.582,981.673,491.750,871.805,811.861,50
1.716,061.801,921.857,651.927,281.982,22
1.914,901.974,502.015,472.092,86
2.021,682.061,142.101,372.176,402.238,30
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
126
d S-UCPmm SM-UCP
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
d C-UCPmm CM-UCP
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
d C-UCPmm CM-UCP
065 313070 314075 315
080 316085 317090 318
095 319100 320110 322
120 324130 326140 328
56,1863,1376,22
85,88103,67116,81
138,48176,42218,19
254,53
75,9081,2394,37
103,67126,88137,71
163,26200,37248,35
287,04
465,76538,49619,74
739,65856,47968,66
1.081,631.329,991.826,71
2.369,062.972,523.459,20
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
127
d S-UKPmm SM-UKP
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
67,6283,5696,71
108,31123,03145,45
181,05223,59257,62
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
128
d C-UKPmm CM-UKP
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
d C-UKPmm CM-UKP
060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
88,20106,77116,81
127,67153,98169,44
221,26250,66291,69 493,63
633,66785,31885,90
981,051.106,371.314,50
1.823,602.516,833.278,91
3.676,61
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
129
S-UCFSM-UCF
d S-UCFLmm SM-UCFL
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
C-UCFCM-UCF
d C-UCFLmm CM-UCFL
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
C-UCFCM-UCFC-UCFLCM-UCFL
d C-UCFSmm CM-UCFS
065 313070 314075 315
080 316085 317090 318
095 319100 320110 322
120 324130 326140 328
51,6158,1969,43
79,6997,50
109,10
128,43163,26201,94
239,85
61,4366,4777,31
89,74110,62120,68
139,26177,94217,40
249,90
434,81488,98568,67
677,77787,62891,30
1.003,481.227,091.680,47
2.254,552.824,003.321,50
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
130
S-UKFSM-UKF
d S-UKFLmm SM-UKFL
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
61,4376,2290,52
99,80114,50133,85
167,89205,79243,70
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
131
C-UKFCM-UKF
d C-UKFLmm CM-UKFL
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
C-UKFCM-UKFC-UKFLCM-UKFL
d C-UKFSmm CM-UKFS
060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
71,3482,01
100,59
112,18127,67145,45
181,82222,04256,09 465,76
623,61757,47844,10
947,001.083,931.275,05
1.743,922.504,463.322,27
3.658,82
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
132
d S-UCFCmm SM-UCFC
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
d C-UCFCmm CM-UCFC
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
53,4660,8873,17
83,56102,91112,95
133,85170,97209,67
252,22
64,0269,2579,69
93,62114,50126,10
144,67188,00226,68
260,74
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
133
d S-UKFCmm SM-UKFC
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
d C-UKFCmm CM-UKFC
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
64,4381,2393,62
103,67119,15139,26
175,62215,08257,62
74,9988,96
104,45
116,81130,74150,09
189,55231,32266,14
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
134
d S-UCTmm SM-UCT
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
d C-UCTmm CM-UCT
020 204025 205030 206
035 207040 208045 209
050 210055 211060 212
065 213
d C-UCTmm CM-UCT
065 313070 314075 315
080 316085 317090 318
095 319100 320110 322
120 324130 326140 328
58,5765,6178,92
89,74111,42122,25
144,67182,58229,80
263,82
78,1683,5697,50
107,55129,98143,13
167,12207,35256,85
297,86
465,76536,95619,74
739,65856,47968,66
1.081,631.329,991.826,71
2.369,062.972,523.458,43
Gehäuselager (Guß)Bearings units (Cast housing)
Paliers fonteSupporti (ghisa)
Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
135
d S-UKTmm SM-UKT
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
71,7988,20
101,35
111,42128,43150,09
188,79232,12267,69
Gehäuselager (Guß)Bearings units (Cast housing)Paliers fonteSupporti (ghisa)Soportes de fundición
€ T Q € T Q
Preise für Spannhülsen H 23 .. auf Seite 88.Price for adapter H23 .. see page 88.Prix des manchons H 23 .. voir page 88.Prezzi per bussole .. Pagina 88.Precio del manguito H23 .. Ver página 88.
136
d C-UKTmm CM-UKT
020 205025 206030 207
035 208040 209045 210
050 211055 212060 213
d C-UKTmm CM-UKT
060 313
065 315070 316075 317
080 318085 319090 320
100 322110 324115 326
125 328
84,33112,18122,25
131,54149,33174,08
211,22260,74313,35 493,63
633,66785,31885,09
981,051.106,371.314,50
1.823,602.516,833.278,91
3.676,61
ZubehörAccessoriesAccessoires
AccessoriAccesorios
€ T Q € T Q
137
MSS
050608
101214
161820
* Preis auf Anfrage* Price upon request* Prix sur demande* Prezzo su richiesta* Precio bajo consulta
S5W
05 x 0,80 x 08,505 x 0,80 x 1106 x 0,75 x 10
06 x 0,75 x 11,508 x 1,00 x 11,510 x 1,25 x 13,5
10 x 1,25 x 1512 x 1,50 x 16,512 x 1,50 x 18
14 x 1,50 x 20
***
***
***
***
***
***
*
ZubehörAccessoriesAccessoiresAccessoriAccesorios
€ T Q € T Q
138
HRS
02,50304
050608
10
* Preis auf Anfrage* Price upon request* Prix sur demande* Prezzo su richiesta* Precio bajo consulta
HRS
3/321/85/32
3/161/45/16
3/8
***
***
*
***
***
*
ZubehörAccessoriesAccessoires
AccessoriAccesorios
€ T Q € T Q
139
GA-
1/4-28 UNFPF1/8
PF1/4
GB-
1/4-28 UNFPF1/8
PF1/4
* Preis auf Anfrage* Price upon request* Prix sur demande* Prezzo su richiesta* Precio bajo consulta
GC-
1/4-28 UNFPF1/8
PF1/4
***
***
***
140
ALLGEMEINE LlEFER- UND ZAHLUNGSBEDINGUNGEN (Stand Dez. 2002)
1. Geltungsbereich
1.1 Allen Verkäufen von NTN liegen auch in Zukunft ausschließlich die nachstehendenBedingungen zugrunde, auch wenn NTN abweichenden Einkaufsbedingungen des Käu-fers nicht widersprochen hat.
1.2 Mit Annahme der Waren gelten diese Bedingungen durch den Käufer als vorbehaltlosangenommen, selbst im Falle seines vorherigen Widerspruchs.
2. Kaufvertrag
2.1 Jeder Kaufvertrag wird nur nach Maßgabe der schriftlichen Auftragsbestätigung von NTNrechtsverbindlich.
2.2 Der Käufer darf die Waren weder ganz noch teilweise zurückgeben, sofern nicht zuvoreine entsprechende Vereinbarung getroffen worden ist.
3. Lieferung
3.1 Die genannten Liefertermine bezeichnen das voraussichtliche Lieferdatum, um dessenEinhaltung NTN bemüht sein wird.
3.2 Im Falle verspäteter Selbstbelieferung durch einen Lieferanten von NTN wird die Liefer-zeit entsprechend verlängert.
3.3 Teillieferungen sind gestattet.3.4 Falls der Käufer seinen (Zahlungs-)Verpflichtungen nicht nachkommt, ist NTN berechtigt,
ausstehende Lieferungen zurückzuhalten.
4. Gefahrübergang
4.1 Der Gefahrübergang auf den Käufer erfolgt mit Übergabe an das Versandunternehmen.
5. Zahlung
5.1 Vorbehaltlich anderer Vereinbarungen verstehen sich die Preise „ab Lager NTN“ aus-schließlich Mehrwertsteuer.
5.2 Vorbehaltlich anderer Vereinbarungen sind alle Rechnungen innerhalb von 30 Tagen abRechnungsdatum netto zahlbar.
5.3 Bei Zielüberschreitung hat der Käufer Zinsen in Höhe von 5 % über dem Basiszinssatzzu bezahlen.
5.4 Der Käufer kann nur mit unbestrittenen oder rechtskräftig festgestellten Forderungen auf-rechnen.
5.5 Falls staatliche Maßnahmen nach dem Datum der Auftragsbestätigung in Kraft treten undzu Preiserhöhungen führen, hat diese der Käufer zu tragen.
5.6 Sofern sich berechtigte Zweifel an der Kreditwürdigkeit des Käufers ergeben, ist NTNberechtigt, Vorauszahlung oder Bankgarantie zu verlangen.
6. Haftung
6.1 NTN leistet für die Dauer von 24 Monaten nach Lieferung Gewähr dafür, dass die Warenbei ordnungsgemäßem Einsatz frei von Mängeln in Konstruktion, Herstellung und Mate-rial sind.
6.2 Bei fehlerhafter Lieferung leistet NTN kostenlos Ersatz. Soweit diese Nacherfüllung fehl-schlägt, kann der Käufer nach seiner Wahl mindern oder vom Vertrag zurücktreten.
6.3 Bei Verletzung vertragswesentlicher Verpflichtungen (Kardinalpflichten) ist die Haftungvon NTN der Höhe nach auf das vertragstypische, vorhersehbare Risiko begrenzt. Bei Verletzung nicht vertragswesentlicher Verpflichtungen, ist die Haftung von NTN aus-geschlossen.Diese Haftungsbeschränkungen gelten nicht für Schäden aus der Verletzung desLebens, des Körpers oder der Gesundheit.
141
7. Eigentumsvorbehalt
7.1 Die Waren stehen unter Eigentumsvorbehalt von NTN bis zur vollständigen Bezahlungdes Kaufpreises und aller ausstehenden oder zukünftigen Forderungen aus derGeschäftsverbindung. Bei Zahlung im Scheck-Wechsel-Verfahren bleibt der Eigentums-vorbehalt bestehen bis zur Einlösung des Wechsels durch den Käufer.
7.2 Der Käufer ist berechtigt, die Waren im Rahmen eines ordnungsgemäßen Geschäftsbe-triebs zu verkaufen, sofern er seinen (Zahlungs-)Verpflichtungen nachkommt, anderen-falls ist NTN berechtigt vom Vertrag zurückzutreten und die Herausgabe der Waren zuverlangen und diese zu verwerten.
8. Anwendbares Recht und Gerichtsstand
8.1 Es gilt deutsches Recht.8.2 Erfüllungsort und Gerichtsstand, auch für Scheck- und Wechselklagen, ist Düsseldorf.8.3 Die Rechtsunwirksamkeit einzelner Bestimmungen berührt die Gültigkeit der übrigen
Bestimmungen nicht.
142
TERMS AND CONDITIONS OF SALE (Dec. 2002)
1. General
1.1 All sales of NTN, present and future, shall be subject exclusively to the following condi-tions even if NTN did not object to the inconsistent purchase conditions of the Buyer.
1.2 Upon acceptance of the goods these conditions are deemed unconditionally acceptedby the Buyer even in the case of his prior objection to them.
2. Purchase Contract
2.1 Any purchase contract will become effective only with and on the terms of NTN's writtenconfirmation.
2.2 The Buyer may not in whole or in part return the goods unless an express agreement hasbeen reached beforehand.
3. Delivery
3.1 The dates quoted for delivery indicate the anticipated time of delivery which NTN tries tomeet.
3.2 If deliveries of NTN suppliers are late, the delivery time will be extended accordingly.3.3 Part deliveries are allowed.3.4 In case the Buyer does not meet his (payment) obligations, NTN is entitled to withhold
any outstanding deliveries.
4. Transfer of Risk
4.1 The risk in the goods shall pass to the Buyer when the goods are handed-over to the for-warder.
5. Payment
5.1 Unless otherwise agreed, all prices are “ex works NTN”, VAT excluded.5.2 Unless otherwise agreed, all invoices are payable within 30 days from invoice date net.5.3 If payment has not been fully effected on time, the Buyer shall pay interest at the rate of
5 % above the interest rate published by the German Federal Bank.5.4 The Buyer may set off counterclaims only, if they are acknowledged by NTN or have been
upheld by a court of law.5.5 If legal provisions imposed by governmental authorities come into force after the date of
the Order Confirmation and lead to a price increase, such price increase shall be borneby the Buyer.
5.6 If there are justified doubts as to the creditworthyness of the Buyer, NTN is entitled todemand advance payment or a bank guarantee.
6. Warranty
6.1 NTN for a period of 24 months upon delivery warrants that the goods are free fromdefects in design, production and material when subjected to proper use.
6.2 If the goods are defective, NTN shall replace them free of charge. As far as this subse-quent performance fails, the buyer has the option to reduce or withdraw from contract.
6.3 With injury of contract-substantial obligations (cardinal obligations) NTN’s liability is lim-ited in the amount of the contract-typical, foreseeable risk. With breach of non contract-substantial obligations, NTN’s liability is excluded.These restrictions do not apply for injury of life, body or health.
143
7. Reservation of Ownership
7.1 The ownership of the goods shall remain with NTN until the purchase price and all out-standing or future claims arising out of the business relationship have been paid in full.In case of payment by cheque backed by a bill of exchange the ownership of the goodsshall remain with NTN until payment of the bill of exchange by the Buyer.
7.2 The Buyer has the right to sell the goods in the ordinary course of business on conditi-on that he meets his (payment) obligations, otherwise NTN is entitled to withdraw fromcontract, claim the return of the goods and to dispose of them.
8. Applicable Law and Jurisdiction
8.1 German law shall apply.8.2 The place of performance and jurisdiction, including claims arising out of cheques of bills
of exchange, shall be Düsseldorf.8.3 If any of these provisions shall be invalid, the remaining provisions shall not be affected
thereby.
144
CONDITIONS GÉNÉRALES DE VENTE
01. Sauf stipulation contraire spécifiée dans nos lettres, les commandes qui nous sont remi-ses et les marchés que nous traitons sont soumis, sans exception, aux conditions généra-les ci-après, qui annulent et remplacent toutes clauses imprimées ou manuscrites figurantsur tous documents de nos acheteurs ou contractants.Toute convention particulière, ou toute dérogation à nos conditions générales doivent faire,de notre part, l’objet de stipulations spéciales écrites. Les conditions générales définies ci-dessous qui ne sont pas expressément modifiées ou abrogées par ces stipulations spé-ciales conservent leur plein et entier effet.Nos conditions générales s’appliquent aussi bien aux fournitures faites en notre nom etpour notre compte, qu’à celles faites par nous au nom et pour le compte de tiers, à titrede sous-traitant ou autrement.
02. Nous ne sommes liés par les engagements qui pourraient être pris par nos représentants,agents, ou tous autres délégués, que sous réserve de confirmation écrite et valablementsignée émanant de notre Société. Aucune commande n’est donc définitive si nous nel’avons pas acceptée expressément par accusé de réception numéroté et signé. Cedernier peut faire l’objet d’objections écrites pendant un délai de huit jours.
03. Nos prix sont basés sur les conditions économiques en vigueur au jour de l’ARC et sontrévisables en cas de modifications de celles-ci au cours des changes.
04. En cas de fourniture additionnelle, les prix sont discutés spécialement avec l’acheteur etles conditions consenties pour la commande initiale ne peuvent être automatiquementappliqués à l’affaire complémentaire.
05. Les délais de livraison indiqués pour nos fournitures et travaux s’entendent sous réservede cas de force majeure (rebut de pièces importantes, grève de notre personnel, ou decelui de nos fournisseurs, retards dans le transport, incendie ou toute autre cause indé-pendante de notre volonté) et sous réserve que nos contractants aient, en temps voulu,rempli les conditions de paiement prévues et fourni tous les renseignements nécessairespour l’exécution de la fourniture. Les retards ne poeuvent, en aucun cas, justifier l’annula-tion de la commande ou donner lieu à pénalités ou à dommages-intérêts.
06. Tous les frais accessoires pouvant grever la commande, soit directement, soit indirecte-ment, comme par exemple une augmentation des tarifs de transport, des taxes et impôts,survenue après l’acceptation de la commande, entraînera une majoration correspondantedu prix convenu, même s’il s’agit d’un prix forfaitaire. Inversement, une diminution desfrais annexes entraînera une minoration du prix convenu.
07. Toutes nos fournitures, même celles vendues franco, voyagent aux risques et périls dudestinataire, auquel il appartient, en cas de manquants, de retards ou d’avaries, survenusau cours du transport, d’exercer tout recours contre les transporteurs conformément auxarticles 105 et 106 du Code du Commerce.
08. Le réceptionnaire doit vérifier immédiatement la qualité, le poids et les dimensions.Nous n’acceptons aucun retour de marchandises sans notre accord préalable. Touteréclamation doit nous parvenir au plus tard hutit jours après réception de la marchandise.
145
09. Nos pièces et notre matériel sont garantis pendant un délai de douze mois contre tousdéfauts de matière et de fabrication les rendant inaptes à un fonctionnement correct, cettegarantie n’ayant d’autre effet que de nous engager à remplacer, dans le plus bref délaipossible, toute pièce de notre fabrication reconnue défectueuse à l’exclusion de tousdommages-intérêts pour quelque cause que ce soit.Le remplacement gratuit ne pourra être accordé qu’après examen, par nous, des piècesavariées, qui devront nous être envoyées franco de port et d’emballage.Toutes les détériorations ou défauts provoqués par usure naturelle ou par accidentsextérieurs tels que: entretiens défectueux, lubrifiant impropre, surcharges, montageerroné, etc., sont exclus de la garantie.
10. Sauf dérogation expresse, les paiements sont faits à SCHWEIGHOUSE-SUR-MODER netssans escompte et sont exigibles aux conditions de délai stipulées dans nos offres, confir-mations de commandes ou factures. Tout paiement non effectué à la date convenue portede plein droit et à partir de cette date une pénalité calculée au taux de l’intérêt légal majoréde 50 %, sans que cette clause nuise à l’exigibilité de la dette.Les termes de paiement ne peuvent être retardés ni modifiés sous quelque prétexte quece soit, même litigieux.Conformément à la loi 80.335 du 12 mai 1980, la propriété de la marchandise vendue nesera réellement transmise à notre clientèle qu’après le paiement intégral. Nous en restonspropriétaire jusque-là et pouvons la revendiquer, ce que notre clientèle n’ignore pas.En cas de vente, cession, de remise en nantissement ou d’apport en sociétés de son fondde commerce ou de son matériel par l’acheteur, comme aussi dans le cas où l’un des pai-ements ou l’acceptation d’une des traites ne sont pas effectuées à la date convenue, lessommes dues deviennent immédiatement exigibles, quelles que soient les conditionsfixées antérieurement.
11. En cas de contestation à l’occasion d’une fourniture ou de son règlement, seules serontcompétentes les juridictions de notre siège social, quels que soient les conditions et lemode de paiement acceptés s’il y a pluralité de défendeurs ou appel en garantie. Ni nostraites et dispositions, ni notre acceptation en paiement de chèques ou effets quelconquessur une autre ville que SCHWEIGHOUSE-SUR-MODER, n’opèrent novation ou dérogationà cette clause attributive de juridiction.
146
CONDIZIONI GENERALI DI VENDITA (Dic. 2002)
1. Ambito di validità
1.1 Tutte le vendite di NTN, anche in futuro, saranno soggette esclusivamente alle seguenticondizioni, anche nel caso in cui NTN non faccia esplicitamente obiezione a eventualicondizioni di acquisto del compratore non conformi con le presenti.
1.2 Con l’accettazione della merce, queste condizioni si intendono approvate senza riservadal compratore, anche nel caso di sue precedenti obiezioni ad esse.
2. Contratto di acquisto
2.1 Ogni contratto di acquisto diviene effettivo solo dopo l’emissione della conferma scrittada parte di NTN.
2.2 L’acquirente non può restituire la merce, né interamente né in parte, prima che sia statostabilito un accordo in proposito.
3. Consegna
3.1 I termini di consegna indicati si riferiscono alle date di consegna previste che NTN cercacon il massimo impegno di rispettare.
3.2 In caso di ritardata consegna da parte di un fornitore di NTN, i termini di consegna saran-no prolungati di conseguenza.
3.3 Sono possibili consegne parziali.3.4 Nel caso in cui l’acquirente non ottemperi ai suoi obblighi di pagamento, NTN è autoriz-
zata a trattenere eventuali consegne pendenti.
4. Rischio di trasporto
4.1 Il rischio di trasporto viene attribuito all’acquirente quando la merce è consegnata all’im-presa di trasporto.
5. Pagamento
5.1 I prezzi si intendono "dallo stabilimento NTN”, esclusa IVA, a meno che non sia statoespressamente stabilito diversamente.
5.2 Tutte le fatture sono pagabili entro 30 giorni dalla data di fatturazione, a meno che nonsia stato espressamente stabilito diversamente.
5.3 Se i pagamenti non vengono effettuati nei termini previsti, l’acquirente pagherà un inter-esse pari all’interesse di base maggiorato del 5%.
5.4 L’acquirente può presentare reclami solo se riconosciuti da NTN, o secondo i termini dilegge previsti.
5.5 Nel caso in cui provvedimenti legislativi da parte delle autorità causino aumenti di prez-zo successivamente alla conferma del contratto di vendita, tali aumenti di prezzo saran-no a carico dell’acquirente.
5.6 Nel caso in cui esistano fondati dubbi sulla solvibilità dell’acquirente, NTN è autorizzataa richiedere un pagamento anticipato o una garanzia bancaria.
147
6. Garanzia
6.1 NTN garantisce per un periodo di 24 mesi dopo la consegna che la merce sia esente dadifetti di progettazione, produzione, materiale, nel caso di corretto utilizzo.
6.2 Nel caso in cui la merce sia difettosa alla consegna, NTN garantisce la sostituizionesenza costi aggiuntivi. Nel caso di ulteriore difettosità della merce, l’acquirente puòrecedere in parte o totalmente dal contratto.
6.3 In caso di infrazione alle obbligazioni fondamentali del contratto (obbligazioni cardinali)NTN è soggetta a responsabilità nei limiti dei normali e prevedibili rischi contrattuali.In caso di infrazione ad obbligazioni non fondamentali del contratto, la responsabilità diNTN è esclusa.Queste limitazioni di responsabilità non si applicano in caso di danni fisici, di salute, ovitali.
7. Diritto di proprietà
7.1 La merce rimane di proprietà di NTN fino al completo pagamento del prezzo di acquis-to e fino alla completamento di tutte le eventuali controversie derivanti dal rapporto com-merciale.
7.2 L’acquirente è autorizzato a vendere la merce, nell’ambito delle comuni attività commer-ciali, a condizione che abbia assolto tutti gli obblighi di pagamento verso NTN. In casocontrario, NTN è autorizzata a recedere dal contratto, a richiedere la restituzione dellamerce, e a disporne diversamente.
8. Normativa e giurisdizione applicabile
8.1 Vale la legislazione tedesca.8.2 Il foro competente per qualsiasi controversia è quello di Düsseldorf.8.3 Nel caso in qualcuna delle presenti condizioni perdesse validità, ciò non pregiudicherà la
validità delle condizioni restanti.
148
TERMINOS Y CONDICIONES DE VENTA (Dec. 2002)
1. General
1.1 Todas las ventas presentes y futuras de NTN quedan exclusivamente sujetas a las sigu-ientes condiciones incluso en el caso que NTN no se oponga a las CondicionesGenerales de Compra establecidas por el Comprador.
1.2 Hasta la recepción y total aceptación de la mercancía, estas condiciones se consideranincondicionalmente aceptadas por el comprador, incluso en el caso que exista una pre-via objeción a ellas por él.
2. Contrato de Compra
2.1 Cualquier Contrato de Compra sólo se hará efectivo según los términos de la confirma-ción escrita de NTN.
2.2 El comprador no podrá devolver un envío ni parte del mismo, a no ser que de antemanohaya llegado a un acuerdo expreso con NTN.
3. Entregas
3.1 Los plazos de entrega ofertados indican el tiempo de entrega que NTN intentará cumplir.3.2 Si las entregas se efectuasen fuera del período indicado, el plazo de entrega será
consecuentemente modificado.3.3 El comprador acepta entregas parciales de mercancía.3.4 En caso que el comprador no cumpliese con sus obligaciones de pago, NTN se reserva
el derecho a retener cualquier mercancía, siendo responsabilidad del comprador el dañoy perjuicio causado a sí mismo o a terceros, por dicha retención.
4. Transferencia de Riesgo
4.1 Será responsabilidad del comprador cualquier riesgo que pueda sufrir la mercancía apartir del momento que los bienes estén en poder del Transportista.
5. Pago
5.1 Salvo acuerdo en contrario, los precios son "ex Works” NTN Wälzlager (Europe) GmbHen Erkrath, Alemania. IVA ni impuestos locales incluidos.
5.2 Salvo acuerdo en contrario, los pagos se efectuarán dentro de los 30 días naturales dela fecha de emisión de la factura.
5.3 Caso que los pagos no se efectúen en dicho plazo, NTN se reserva el derecho a recla-mar un interés de demora del 5% sobre el tipo de interés publicado por el Banco FederalAlemán.
5.4 El comprador solamente podrá interponer una demanda si previamente NTN ha sidoinformada o si dicha acción ha sido confirmada por un Tribunal de Justicia.
5.5 Si acaecen costes extraordinarios por imperativo legal que impliquen un incremento delprecio de la mercancía, dicho extra coste será por cuenta del comprador incluso si existeun precio fijo pactado de antemano.
5.6 Caso de existir duda justificada de la solvencia del comprador, NTN se reserva el dere-cho a exigir pago por adelantado, carta de crédito o aval bancario, aún en el caso queestuviesen pactadas otras condiciones de pago.
149
6. Garantía
6.1 NTN garantiza por un periodo de 24 meses a partir de su entrega al comprador que susproductos:
a. Son conformes a las especificaciones referidas al plano de NTN.b. Están libres de cualquier defecto de fabricación y de materiales.
6.2 Dicha garantía se extiende a la reposición o la reparación del artículo, caso que fueraposible, libre de gastos.
6.3 Dicha garantía no comprende la pérdida, daño o gasto generado por un uso incorrecto,abuso o accidente, ni por un montaje, operación, mantenimiento o aplicación incorrectapor parte del comprador ni de su usuario final.
6.4 Quedan excluidos de la garantía aquellos problemas causados por corrosión, falta delubricación, deterioro de la grasa, retenes y cualquier otro componente distinto alrodamiento, aparición de cuerpos extraños dentro del rodamiento (tierra, arena, partícu-las y virutas de metal, etc), introducción de componentes distintos a aquellos de lagrasa. Así mismo quedan excluidos los problemas causados por defectos en el monta-je, exceso o falta de apriete, juego resultante erróneo.
6.5 Caso de aparición de no conformidades en el producto suministrado, el compradordeberá notificarlo inmediatamente a NTN, pudiendo solicitar su cambio o reparación. Sinembargo, antes de tomar dicha decisión, el comprador debe considerar y respetar loscomentarios e informes de investigación emitidos por el vendedor sobre los defectos ono conformidades que son el objeto del asunto.
6.6 En el caso que el vendedor no esté de acuerdo con la reclamación en garantía realiza-da, deberá hacerlo por escrito. Ambas partes se comprometen a negociar de buena fey amigablemente la resolución del asunto.
7. Reserva de la Propiedad
7.1 NTN se reserva la propiedad de los bienes hasta la completa satisfacción pecuniaria porparte del comprador o bien hasta la finalización de cualquier queja, reclamación u otroasunto relacionado con la mercancía en particular.
7.2 El comprador tiene el derecho de vender los bienes en el curso ordinario de su negociocon la condición que esté al corriente de su pago. En otro caso, NTN se reserva el dere-cho a rescindr el contrato, reclamar dichos bienes y disponer de ellos.
8. Ley aplicable y Jurisdicción
8.1 En caso necesario se actuará según las Leyes Alemanas y los tribunales correspondi-entes a la ciudad de Dusseldorf.
8.2 Si por cualquier circunstancia no fuese posible aplicar alguna de estas premisas, lasrestantes permanecerán invariables.
NTN Wälzlager (Europa) GmbHHauptverwaltung Erkrath Max-Planck-Straße 2340699 ErkrathDeutschland Fon: +49 (0) 2 11 / 25 08 - 0Fax: +49 (0) 2 11 / 2 50 84 00E-Mail: [email protected]
NTN Wälzlager (Europa) GmbHBüro Hamburg Barkhausenweg 722339 HamburgDeutschland Fon: +49 (0) 40 / 53 69 62- 0Fax: +49 (0) 40 / 53 69 62 15E-Mail: [email protected]
NTN Wälzlager (Europa) GmbHBüro Stuttgart Schurwaldstraße 1373765 NeuhausenDeutschland Fon: +49 (0) 71 58 / 17 04 - 0Fax: +49 (0) 71 58 / 17 04 60 E-Mail: [email protected]
NTN Wälzlager (Europa) GmbHBüro München Geretsrieder Straße 10 a81379 MünchenDeutschland Fon: +49 (0) 89 / 74 88 63 - 0 Fax: +49 (0) 89 / 78 63 82 E-Mail: [email protected]
NTN Bearings (UK) LTDWellington Crescent Fradley ParkLichfield, StaffordshireWS13 8RZEngland Fon: +44 (0) 15 43 / 44 50 00Fax: +44 (0) 15 43 / 44 50 35E-Mail: [email protected]
NTN France S.A.Z.I. Sablière BP 338 Schweighouse sur Moder67507 Haguenau CedexFrance Fon: +33 (0) 3.88.53.22.22Fax: +33 (0) 3.88.73.46.95E-Mail: [email protected]
NTN France S.A.Agence de Paris BP 27 Emerainville77313 Marne la Vallee Cedex 2France Fon: +33 (0) 1.64.80.47.47Fax: +33 (0) 1.64.80.47.48E-Mail: [email protected]
NTN France S.A.Agence de Lyon 2, place Berthe Morizot69800 Saint PriestFrance Fon: +33 (0) 4.72.04.00.44Fax: +33 (0) 4.72.04.00.56E-Mail: [email protected]
Deutschland
NTN Wälzlager (Europa) GmbHNiederlassung ItalienFiliale di Bologna Via Maestri del Lavoro 340138 BolognaItalia Fon: +39 051/ 53 5174Fax: +39 051/ 53 84 92E-Mail: [email protected]
Italia
Great Britain
France